Article | Open

Tuning the multiferroic mechanisms of TbMnO3 by epitaxial strain

  • Scientific Reports 7, Article number: 44753 (2017)
  • doi:10.1038/srep44753
  • Download Citation
Received:
Accepted:
Published online:

Abstract

A current challenge in the field of magnetoelectric multiferroics is to identify systems that allow a controlled tuning of states displaying distinct magnetoelectric responses. Here we show that the multiferroic ground state of the archetypal multiferroic TbMnO3 is dramatically modified by epitaxial strain. Neutron diffraction reveals that in highly strained films the magnetic order changes from the bulk-like incommensurate bc-cycloidal structure to commensurate magnetic order. Concomitant with the modification of the magnetic ground state, optical second-harmonic generation (SHG) and electric measurements show an enormous increase of the ferroelectric polarization, and a change in its direction from along the c- to the a-axis. Our results suggest that the drastic change of multiferroic properties results from a switch of the spin-current magnetoelectric coupling in bulk TbMnO3 to symmetric magnetostriction in epitaxially-strained TbMnO3. These findings experimentally demonstrate that epitaxial strain can be used to control single-phase spin-driven multiferroic states.

Introduction

Materials with both electric and magnetic order, called multiferroics1, offer opportunities to magnetically control their electric properties and vice versa2,3. For device applications the magnitude of the mutual coupling between these orders is of crucial importance. One of the most widely studied materials with multiple ferroic properties is BiFeO3. It exhibits multiferroicity at room temperature and the structural phase4 and magnetic properties5 are found to be modified by epitaxial strain when grown as thin films6. In such a system, despite the independent origin for their magnetism and ferroelectricity, a reorientation of the magnetic order can be achieved using electric fields in bulk7,8 but also in thin films9. One can also expect a strong magnetoelectric coupling intrinsic to a compound itself in so-called spin-driven ferroelectrics and act on the electric and magnetic order with an external magnetic or electric field, respectively10,11,12. In the last 15 years, a number of spin-driven multiferroics have been discovered. However, it has remained a challenge to tune their physical properties. Recently it was shown that hydrostatic pressure in bulk TbMnO3 can switch its multiferroic ground state by completely changing the magnetic phase, leading to a large enhancement of the ferroelectric (FE) polarization (P)13,14. For thin-film rare-earth manganites, it was shown that strain may alter the magnetic properties15,16 leading to e.g. a complex coexistence of magnetic order parameters15.

Here we demonstrate that the multiferroic ground state of a TbMnO3 thin film can be tuned by epitaxial strain to adopt very different multiferroic phases. Our conclusions are supported by an extensive characterization of the magnetic and electric properties. Depending on the strain state, our TbMnO3 films can adopt either a spin-spiral-induced ferroelectric ground state observed in the bulk17,18, or a clean E-type magnetic ground state with large P. The stabilization of single-phase multiferroic phases in films, and their control using epitaxial strain, is an important milestone towards the development of device applications based on multiferroic films.

Results

TbMnO3 films were prepared on (010) and (100) oriented YAlO3 substrates by pulsed laser deposition using a KrF excimer laser. The lattice mismatch between TbMnO3 and a (010) YAlO3 substrate was ~2.1% along the a- and ~0.4% along the c-axis19,20. A (100) YAlO3 substrate was used to prepare a relaxed reference sample expected to display bulk-like properties. Out-of-plane x-ray θ-2θ diffraction patterns (Fig. 1a) indicate the TbMnO3 films grown on both (010) and (100) YAlO3 to be single-phase without any twinning. (010) oriented TbMnO3 films (14 and 44 nm) were obtained on (010) YAlO3 substrates. A (100) oriented TbMnO3 film was grown on a (100) YAlO3 substrate different to previous reports21,22. In order to investigate lattice parameters of those films, reciprocal lattice maps were taken using a four-circle x-ray diffractometer (Fig. 1b–e, Table 1). The lattice of the (010) oriented 44 nm film is clamped to the substrate as demonstrated in the (130) and (041) reflections, exhibiting the same in-plane components of the reciprocal lattice points (Qa and Qc). The peak locations clearly deviate from those estimated for bulk, verifying that the film is largely strained. The out-of-plane lattice parameter of the film is expanded by 1.7% as a consequence of epitaxial strain. The 14 nm film showed the same crystallographic properties. Contrary to the (010) oriented film, the (100) oriented 80 nm film exhibited a relaxed structure, having the (402) and (310) reflections close to those of bulk and a fraction of c-axis strained layer. The (100) oriented film also displayed a large mosaicity as indicated by the broadened (402) and (310) peaks, while the (010) oriented film has very good crystallinity shown by the sharp (130) and (041) reflections with Laue oscillations. Hereafter, we refer to the (010) oriented films as “the strained films” and to the (100) oriented film as “the relaxed film.” Using thick (010) oriented films is not the best choice to investigate properties of relaxed TbMnO3 films by neutron diffraction and SHG since these thick films typically consist of multiple layers (strained, partially relaxed, and fully relaxed)23 with modified physical properties for each layer. Those measurements probe signals from the entire film thickness and data cannot be analysed unambiguously.

Figure 1: Structural properties of TbMnO3 films grown on a (010) and a (100) oriented YAlO3 substrate.
Figure 1

(a) θ-2θ scans of TbMnO3 films on a (010) oriented (top) and a (100) oriented YAlO3 (bottom) substrate. Each peak marked by an asterisk is from the YAlO3 substrate. Reciprocal lattice maps of (b) the (130) and (c) the (041) reflection of a 44 nm TbMnO3 film on a (010) oriented YAlO3 substrate. Those of the (310) and the (402) reflection of a 80 nm TbMnO3 film on a (100) oriented YAlO3 substrate are shown in (d) and (e) respectively.

Table 1: Lattice parameters and strain (compressive, +; tensile, −) of TbMnO3 films derived from Fig. 1.

The magnetic order in the films was investigated by neutron diffraction using the triple-axis spectrometer RITA-II at PSI, SINQ (Switzerland) and the single crystal four-circle diffractometer D10 at ILL (France). The films were aligned in the (0 k l) scattering plane in order to access the strong magnetic reflection at (0 qk 1)24. Representative scans along (0 k 1) at selected temperatures are displayed in Fig. 2. From these data we find the strained film to show a commensurate phase with qk = 0.50 (r.l.u.) (Fig. 2a) below ~31 K which is in a sharp contrast to the relaxed film which exhibits bulk-like magnetic properties with an incommensurate (IC) magnetic wave vector with qk~0.29 (r.l.u.) from Mn spins (Fig. 2b)24,25. We do not observe any other peak between 0.2 ≤ qk ≤ 0.55 from the strained film at 15 K demonstrating that the magnetic order of the Mn spins is completely modified by epitaxial strain. The narrow peak width of the magnetic reflections of the strained film is close to the instrumental resolution (Fig. 2a inset) and reveals an out-of-plane magnetic correlation length of the order of 40 nm which corresponds to the film thickness. This is to the best of our knowledge the first report of an orthorhombic rare-earth manganite film showing a commensurate magnetic diffraction peak which directly implies E-type antiferromagnetism (AFM). The existence of E-type AFM claimed in previous reports is indirectly deduced from a large P along the a-axis (||a) and/or structural diffraction measurements15,26.

Figure 2: Magnetic diffraction measurements of the TbMnO3 films.
Figure 2

The (0, qk, 1) magnetic Bragg reflections measured at 15 and ca. 30 K of (a) the strained TbMnO3 film and (b) the relaxed TbMnO3 film. The (0 qk 1) reflection at 31 K of the strained TbMnO3 film is magnified in the inset of (a) and the black line marks the instrumental resolution. Data have been shifted for clarity. The black line marker gives the instrumental resolution. Schematic images of Mn spin order (c) in the ab-plane for E-type AFM and (d) in the bc-plane for bc-cycloid18,44.

In order to probe the FE state in the strained film, we performed SHG experiments. SHG is sensitive to inversion-symmetry-breaking FE order and a well-established tool to investigate these systems non-invasively12,22,27. First, from the temperature-dependence of the SHG response we observe a significantly increased FE transition temperature (TFE) at ~41 K (Fig. 3a). This is about 15 K higher than TFE in the bulk-like relaxed films (see inset Fig. 3a and ref. 22). Second, to verify that the P-direction flipped from ||c to ||a in the strained film, we performed light polarization dependent SHG measurements as shown in Fig. 3b. Here, we kept the incoming light polarization parallel to [100] while the outgoing polarization dependence was mapped out. The symmetry-based analysis confirms that the P points along the a-axis.

Figure 3: Structural polar responses of the TbMnO3 films.
Figure 3

(a) Temperature dependence of the SHG response of the strained TbMnO3 film. The inset shows the corresponding data for the unstrained film. Both data sets were normalized to the maximum of the SHG intensity of the strained film. (b) SHG experimental geometry: The incoming light polarization of the fundamental beam at ω can be set and the outgoing frequency-doubled response at 2ω can be read out, respectively. The data points correspond to a measurement with the incoming polarization fixed along the (100) direction. The data matches the expected symmetry for a polarization pointing along the a-axis.

Furthermore, we observed a remarkable increase in the SHG intensity in the strained film. It is at least two orders of magnitude larger than in bulk12 and significantly larger than in bulk-like films (Fig. 3a and ref. 22). This enormous gain might be attributed to the corresponding strain induced P enhancement since the SHG intensity is proportional to P2. Our SHG measurements therefore reveal that (i) the ordering temperature TFE as well as the SHG yield are substantially increased and (ii) the polarization direction flipped from the c-axis to the a-axis.

In Fig. 4 the temperature dependencies of the magnetic and electric properties of the strained films are summarized. The neutron scattering intensity of the peak measured at qk = 0.5 is plotted in Fig. 4a and extrapolates to zero at approximately 41 K which is very close to the TFE. The temperature dependence of the peak position of the magnetic order vector is shown in Fig. 4b. It is constant below Tlock~31 K with a concurrent locking of the magnetic order into E-type AFM (qk = 0.5) where Tb spins, too, are expected to exhibit an ordered state14,24,25. Capacitance measurements show a divergent behaviour at around 41 K which corresponds to the TFE (Fig. 4c). Thus, the strained film exhibits the following multiferroic phases: E-type AFM with ferroelectricity below Tlock and IC AFM with ferroelectricity between Tlock and TFE. The magnitude of P||a at 15 K is ~2 μC cm−2 which is more than twenty-five times larger than bulk17 and corresponds to the values estimated for o-HoMnO3 with E-type AFM by the point charge model or by a specific DFT approach28. The stated value for P is larger than the reported bulk TbMnO3 value of ~1 μC cm−2 at 5 K and 5.2 GPa, and comparable to ~1.8 μC cm−2 at H = 8 T13, both values being considered to be among the highest ever reported for spin-driven FE.

Figure 4: Temperature dependent multiferroic properties of the strained TbMnO3 films.
Figure 4

Temperature dependent magnetic and electric properties of the strained TbMnO3 film. (a) Peak intensity at (0 0.5 1) magnetic reflection. A red dashed line is a guide to eye. (b) Peak position of the (0 qk 1) magnetic reflection. (c) Normalized capacitance (ΔC = (C(T) − C(50 K))/C(50 K)) measured along the a-axis. The inset shows a ferroelectric hysteresis curve at 15 K. Panel (c) shows data obtained on the 14 nm (010) TbMnO3 film.

Discussion

Our results show that highly strained high-quality TbMnO3 films grown coherently on (010) oriented YAlO3 substrates exhibit commensurate AFM with P||a as a ground state, while bulk shows an IC spin-spiral order with P||c17,18. Meanwhile, TFE and the magnitude of P are enhanced from 28 K to ~41 K and ~0.06 μC cm−2 to ~2 μC cm−2, respectively29. The observed change of the ground state in TbMnO3 induced by two-dimensional growth-induced stress is by chance similar to the application of three-dimensional chemical pressure (i.e. substitution of smaller RE ions)30 or hydrostatic pressure13,14. The modified ground state can be attributed to a strain-tuned dominant magnetoelectric coupling mechanism, from antisymmetric magnetostriction (inverse Dzyaloshinskii-Moriya interaction)31,32,33 to symmetric magnetostriction33,34,35. Our results thus clearly demonstrate a strain-induced tuning of a dominant magnetoelectric coupling mechanism in multiferroic materials, presenting a unique way to control its physical properties.

At the microscopic level, the role of epitaxial strain can be interpreted as follows. The lattice of the strained film is compressed along the a-axis by 2.1% and expanded along the b-axis by 1.7%. Hence, it is expected that the distance between the two oxygen atoms which mediate the next-nearest-neighbour exchange interaction along the b-axis (Jb) (O(2) and O(3) in Fig. 2c) becomes smaller than in the bulk (≈the relaxed film). This leads to a larger orbital overlap between those oxygen ions and, consequently, Jb increases. The increase of Jb seems to be key to trigger the symmetric magnetostriction18. The large P enhancement by epitaxial strain implies a significant increase of a Peierls-type spin-phonon coupling and/or a reduction of elastic energy for the shift of atoms, which also contribute to stabilize E-type AFM by increasing the magnitude of biquadratic interaction33,35,36,37. Since there is no direct access to the experimental verification of the location of oxygen in the film so far to obtain values for those interaction parameters, ab-initio calculations are at present the only way to verify the validity of the abovementioned hypothesis.

Unlike in other reported orthorhombic rare-earth manganites that induce FE order simultaneously with E-type AFM (Tlock = TFE)38,39, our strained TbMnO3 film exhibits ferroelectricity while its magnetic order is still IC (Tlock < TFE). One possible candidate for such a phase is a mixture of stable E-type and meta-stable IC AFM as suggested from Monte Carlo simulations33,35. According to the calculated phase diagram, the IC AFM may disappear at low temperatures depending on the magnitude of Jb, which also fits to our observation of E-type AFM below Tlock. Here we note that neither the SHG signal nor the capacitance shows an anomaly in their temperature dependencies at around Tlock (Figs 3a and 4c), i.e. the temperature variation of the magnetic order at around Tlock seems not to affect the FE properties. This feature contradicts the FE properties as calculated by the Monte Carlo simulations where an abrupt increase of P is expected when an IC component disappears35. Another potential explanation is that the spins are ordered in an ab-cycloidal structure with a very long periodicity. In such cases, a symmetric magnetostriction mechanism can still be dominant. Further studies are required to understand the magnetic structure of the phase with an IC magnetic diffraction peak between TFE and Tlock.

In summary, we demonstrated the modulation of the multiferroic mechanism in TbMnO3 using epitaxial strain. Films coherently grown on (010) oriented YAlO3 substrates are strongly strained and exhibit a commensurate magnetic diffraction peak with a strongly enhanced ferroelectric polarization oriented along the a-axis. In contrast a relaxed TbMnO3 film prepared on a (100) oriented YAlO3 substrate shows bulk-like structural and multiferroic properties. The ground state of the strained film represents the emergence of a dominant symmetric magnetostriction which is absent in bulk and the relaxed film. The microscopic origin can be attributed to the strain-driven enhancement of the next-nearest-neighbour exchange interaction between Mn ions along the b-axis.

Methods

Sample preparation and structural characterization

Epitaxial films of TbMnO3 are grown on (010) oriented YAlO3 single crystalline substrates by pulsed laser deposition using a KrF excimer laser (λ = 248 nm, 2 Hz). The laser beam is focused onto a sintered ceramic target with a spot size of ~1.2 × 1.7 mm. The laser fluence was adjusted to 2.0 J cm−2. The substrate is located on-axis to the plasma plume with a distance of 4.1 cm from the target. Deposition was performed in an N2O background at 0.7 mbar with the substrate heated to 690 °C by a lamp heater23. The reference TbMnO3 film on a (100) oriented YAlO3 substrate, too, was prepared by pulsed laser deposition with a different heater and conditions. A Si resistive heater maintained the temperature at 760 °C during the growth with the target-substrate distance of 3.7 cm and N2O background at 0.3 mbar. Right after the deposition the sample was cooled in the same gas environment as the film growth. Reciprocal space maps of films are taken by using a Seifert four-circle x-ray diffractometer with Cu x-ray source equipped with monochromator.

Neutron diffraction measurements

The neutron diffraction measurements carried out at the neutron triple-axis spectrometer RITA-II, SINQ, PSI, utilized an incident wavelength of λ = 4.21 Å obtained from the (002) Bragg reflection of a vertically focusing pyrolytic graphite (PG) monochromator. A PG filter between the monochromator and the sample, and a cooled Be filter between the sample and the analyser were installed to suppress the higher order contamination. The sample was mounted in the (0k0)-(00l) scattering plane. RITA-II is equipped with a nine-bladed PG analyser, which provides a high q-resolution and improves the signal to noise ratio. For the diffraction experiment, the central blade is used. To ensure a collimated incident beam an 80′ external collimator was installed between the monochromator and the PG filter. In experiments conducted at D10, ILL, an incident wavelength of λ = 2.364 Å was used without any collimator before or after the sample. Vertical focusing PG crystals were used as an analyser. The four-circle diffractometer both provides an access to a broad range of hkl scattering planes from the sample, and is equipped with an advanced He-4 cryostat for providing cryogenic sample temperatures.

Second-harmonic generation measurements

SHG is a nonlinear optical process denoting the emission of light at frequency 2ω from a crystal irradiated with light at frequency ω. This is expressed by the equation Pi(2ω) = ε0 Σj,k χ(2)ijk Ej(ω) Ek(ω), where Ej,k(ω) and Pi(2ω) are the electric-field components of the incident light and of the nonlinear polarization, respectively, with the latter acting as the source of the SHG wave. The nonlinear susceptibility χ(2)ijk characterizes the ferroelectric state.

Multiferroic TbMnO3 possesses the point group symmetry mm2 (2-axis || P). For a spontaneous polarization along the c-axis, the relevant SHG tensor components then yield χ(2)ccc, χ(2)caa and χ(2)aca. In the strained phase the polarization reorients along the a-axis with the dominant tensor component χ(2)aaa.

For probing the TbMnO3 films, we used light pulses emitted at 1 kHz from an amplified Ti:sapphire system with an optical parametric amplifier. The light pulses had a photon energy of 1.0 eV, a pulse length of 120 fs and a pulse energy between 2–20 μJ. Detailed technical aspects of SHG in ferroic systems and especially in TbMnO3 are described in refs 12,27.

Electrical characterization

In order to evaluate in-plane electric properties of films, Au (56 nm)/Ti (4 nm) interdigitated electrodes were patterned on the film surface by photolithography and lift-off procedures. The finger width and gap are 5 μm and the line length is 1.25 mm. Measurements were performed at continuous helium flow atmosphere and temperature was controlled by a LakeShore Model 325 temperature controller. Capacitance measurements were performed using an Agilent E4980A LCR meter at zero DC field with an AC voltage of 100 mV. The frequency is varied from 100 to 2 MHz and the data taken at 15 kHz are shown in Fig. 4c. A ferroelectric hysteresis curve was probed through the Positive-Up Negative-Down (double-wave) method40, using National Instruments compact DAQ analog input (NI 9229)/output (NI 9263) modules and a home-made Sawyer-Tower circuit. The frequency of the input sinusoidal waves was set to 1 kHz. The polarization (P) was calculated as P = Q(tL)−141,42, where Q is the measured charge, t is the film thickness, and L is the total length of the finger pairs.

Additional Information

How to cite this article: Shimamoto, K. et al. Tuning the multiferroic mechanisms of TbMnO3 by epitaxial strain. Sci. Rep. 7, 44753; doi: 10.1038/srep44753 (2017).

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

References

  1. 1.

    Multi-ferroic magnetoelectrics. Ferroelectrics 162, 317–338, doi: 10.1080/00150199408245120 (1994).

  2. 2.

    , , & The evolution of multiferroics. Nature Reviews Materials 1, 16046, doi: 10.1038/natrevmats.2016.46 (2016).

  3. 3.

    & The Renaissance of Magnetoelectric Multiferroics. Science 309, 391–392, doi: 10.1126/science.1113357 (2005).

  4. 4.

    et al. A Strain-Driven Morphotropic Phase Boundary in BiFeO3. Science 326, 977–980 (2009).

  5. 5.

    et al. Neutron Diffraction Investigations of Magnetism in BiFeO3 Epitaxial Films. Advanced Functional Materials 21, 1567–1574, doi: 10.1002/adfm.201002125 (2011).

  6. 6.

    et al. Epitaxial BiFeO3 Multiferroic Thin Film Heterostructures. Science 299, 1719–1722, doi: 10.1126/science.1080615 (2003).

  7. 7.

    et al. Electric-Field-Induced Spin Flop in BiFeO3 Single Crystals at Room Temperature. Physical Review Letters 100, 227602 (2008).

  8. 8.

    , & Electric field control of the magnetic state in BiFeO3 single crystals. Applied Physics Letters 92, 192906, doi: 10.1063/1.2930678 (2008).

  9. 9.

    et al. Electric-Field-Induced Magnetization Reversal in a Ferromagnet-Multiferroic Heterostructure. Physical Review Letters 107, 217202 (2011).

  10. 10.

    Classifying multiferroics: Mechanisms and effects. Physics 2, 20–20, doi: 10.1103/Physics.2.20 (2009).

  11. 11.

    , & Multiferroics of spin origin. Reports on Progress in Physics 77, 076501–076501, doi: 10.1088/0034-4885/77/7/076501 (2014).

  12. 12.

    et al. Magnetoelectric domain control in multiferroic TbMnO3. Science 348, 1112–1115 (2015).

  13. 13.

    et al. Giant spin-driven ferroelectric polarization in TbMnO3 under high pressure. Nature communications 5, 4927–4927, doi: 10.1038/ncomms5927 (2014).

  14. 14.

    et al. Magnetic ordering in pressure-induced phases with giant spin-driven ferroelectricity in multiferroic TbMnO3. Physical Review B 93, 081104 (2016).

  15. 15.

    et al. Origin of the Large Polarization in Multiferroic YMnO3 Thin Films Revealed by Soft- and Hard-X-Ray Diffraction. Physical Review Letters 108, 047203–047203, doi: 10.1103/PhysRevLett.108.047203 (2012).

  16. 16.

    , , , & Strain-driven transition from E-type to A-type magnetic order in YMnO3 epitaxial films. Physical Review B 86, 024420 (2012).

  17. 17.

    et al. Magnetic control of ferroelectric polarization. Nature 426, 55–58, doi: 10.1038/nature02018 (2003).

  18. 18.

    et al. Magnetic Inversion Symmetry Breaking and Ferroelectricity in TbMnO3. Physical Review Letters 95, 087206–087206, doi: 10.1103/PhysRevLett.95.087206 (2005).

  19. 19.

    et al. In Natural Bureau of Standards Monograph 25, Standard X-ray Diffraction Powder Patterns Section 19 7 (U.S. DEPARTMENT OF COMMERCE, 1982).

  20. 20.

    , , & Evolution of the Jahn−Teller Distortion of MnO6 Octahedra in RMnO3 Perovskites (R = Pr, Nd, Dy, Tb, Ho, Er, Y): A Neutron Diffraction Study. Inorganic Chemistry 39, 917–923, doi: 10.1021/ic990921e (2000).

  21. 21.

    et al. High quality TbMnO3 films deposited on YAlO3. Journal of Alloys and Compounds 509, 5061–5063, doi: 10.1016/j.jallcom.2011.03.015 (2011).

  22. 22.

    et al. Stability of spin-driven ferroelectricity in the thin-film limit: Coupling of magnetic and electric order in multiferroic TbMnO3 films. Physical Review B 88, 054401–054401, doi: 10.1103/PhysRevB.88.054401 (2013).

  23. 23.

    , , & Cation ratio and ferroelectric properties of TbMnO3 epitaxial films grown by pulsed laser deposition. Journal of Applied Physics 119, 184102, doi: 10.1063/1.4948961 (2016); Journal of Applied Physics 120, 069901, doi: 10.1063/1.4960764 (2016).

  24. 24.

    , , , & Magnetic structure of the perovskite-like compound TbMnO3. Physica B + C 86–88, Part 2, 916–918, doi: 10.1016/0378-4363(77)90740-9 (1977).

  25. 25.

    , , , & Magnetic structure of TbMnO3 by neutron diffraction. Physical Review B 70, 012401 (2004).

  26. 26.

    & Observation of large electric polarization in orthorhombic TmMnO3 thin films. Applied Physics Letters 97, 232902, doi: 10.1063/1.3524500 (2010).

  27. 27.

    , & Second-harmonic generation as a tool for studying electronic and magnetic structures of crystals: review. J. Opt. Soc. Am. B 22, 96–118, doi: 10.1364/JOSAB.22.000096 (2005).

  28. 28.

    & Hybrid functional study of proper and improper multiferroics. Physical Chemistry Chemical Physics 12, 5405–5416, doi: 10.1039/B927508H (2010).

  29. 29.

    , , , & Magnetoelectric phase diagrams of orthorhombic RMnO3 (R = Gd, Tb, and Dy). Physical Review B 71, 224425–224425, doi: 10.1103/PhysRevB.71.224425 (2005).

  30. 30.

    et al. Perovskite manganites hosting versatile multiferroic phases with symmetric and antisymmetric exchange strictions. Physical Review B 81, 100411–100411, doi: 10.1103/PhysRevB.81.100411 (2010).

  31. 31.

    , & Spin Current and Magnetoelectric Effect in Noncollinear Magnets. Physical Review Letters 95, 057205–057205, doi: 10.1103/PhysRevLett.95.057205 (2005).

  32. 32.

    & Role of the Dzyaloshinskii-Moriya interaction in multiferroic perovskites. Physical Review B 73, 094434 (2006).

  33. 33.

    , & Theory of spin-phonon coupling in multiferroic manganese perovskites RMnO3. Physical Review B 84, 144409–144409, doi: 10.1103/PhysRevB.84.144409 (2011).

  34. 34.

    , & Ferroelectricity in the Magnetic E-Phase of Orthorhombic Perovskites. Physical Review Letters 97, 227204–227204, doi: 10.1103/PhysRevLett.97.227204 (2006).

  35. 35.

    , & Spin Model of Magnetostrictions in Multiferroic Mn Perovskites. Physical Review Letters 105, 037205 (2010).

  36. 36.

    Frustrated classical Heisenberg model in one dimension with nearest-neighbor biquadratic exchange: Exact solution for the ground-state phase diagram. Physical Review B 80, 012407–012407, doi: 10.1103/PhysRevB.80.012407 (2009).

  37. 37.

    , & Frustrated Classical Heisenberg and XY Models in Two Dimensions with Nearest-Neighbor Biquadratic Exchange: Exact Solution for the Ground-State Phase Diagram. Physical Review Letters 105, 047203–047203, doi: 10.1103/PhysRevLett.105.047203 (2010).

  38. 38.

    et al. Evidence for large electric polarization from collinear magnetism in TmMnO3. New Journal of Physics 11, 043019, doi: 10.1088/1367-2630/11/4/043019 (2009).

  39. 39.

    et al. Magnetically driven ferroelectric atomic displacements in orthorhombic YMnO3. Physical Review B 84, 054440–054440, doi: 10.1103/PhysRevB.84.054440 (2011).

  40. 40.

    & New Technique for Measuring Ferroelectric and Antiferroelectric Hysteresis Loops. Journal of the Physical Society of Japan 77, 064706–064706, doi: 10.1143/JPSJ.77.064706 (2008).

  41. 41.

    et al. Sensing characteristics of in-plane polarized lead zirconate titanate thin films. Applied Physics Letters 75, 4180–4182, doi: 10.1063/1.125575 (1999).

  42. 42.

    et al. Lead zirconate titanate films for d33 mode cantilever actuators. Sensors and Actuators A: Physical 105, 91–97, doi: 10.1016/S0924-4247(03)00068-2 (2003).

  43. 43.

    & VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data. Journal of Applied Crystallography 44, 1272–1276, doi: doi: 10.1107/S0021889811038970 (2011).

  44. 44.

    et al. Nature of the magnetic order and origin of induced ferroelectricity in TbMnO3. Physical Review Letters 103, 207602–207602, doi: 10.1103/PhysRevLett.103.207602 (2009).

Download references

Acknowledgements

This work is based on experiments performed at the Swiss spallation neutron source SINQ, Paul Scherrer Institute, Villigen, Switzerland. Financial support and CROSS funding to K.S. from PSI are acknowledged. S. Mukherjee acknowledges financial support from the Swiss National Science Foundation (SNF, project number 200021_147049) and J.S.W. from MaNEP and SNF (No. 200021_138018). M.T. and M.F. acknowledge funding through the SNSF R’Equip Program (Grant No. 206021-144988) and the EU European Research Council (Advanced Grant 694955 - INSEETO). We would like to thank M. Bator for providing the (100) oriented TbMnO3 film, D. Marty (PSI, Laboratory for Micro- and Nanotechnology) for support with optical lithography, U. Greuter for the implementation of a Sawyer-Tower circuit for ferroelectric hysteresis measurements, and A. Scaramucci for a fruitful discussion. The drawings of crystal structures are produced by VESTA program43, which is acknowledged.

Author information

Affiliations

  1. Laboratory for Multiscale Materials Experiments, Paul Scherrer Institut, CH 5232, Villigen-PSI, Switzerland

    • Kenta Shimamoto
    • , Thomas Lippert
    •  & Christof W. Schneider
  2. Laboratory for Neutron Scattering and Imaging, Paul Scherrer Institut, CH 5232, Villigen-PSI, Switzerland

    • Saumya Mukherjee
    • , Jonathan S. White
    •  & Christof Niedermayer
  3. Department of Materials, ETH Zurich, CH 8093, Zurich, Switzerland

    • Sebastian Manz
    • , Morgan Trassin
    •  & Manfred Fiebig
  4. Laboratory for Scientific Development and Novel Materials, Paul Scherrer Institut, CH 5232, Villigen-PSI, Switzerland

    • Michel Kenzelmann
  5. Institut Laue Langevin, BP 156X, 38042, Grenoble, France

    • Laurent Chapon
  6. Laboratory of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH, 8093, Zurich, Switzerland

    • Thomas Lippert

Authors

  1. Search for Kenta Shimamoto in:

  2. Search for Saumya Mukherjee in:

  3. Search for Sebastian Manz in:

  4. Search for Jonathan S. White in:

  5. Search for Morgan Trassin in:

  6. Search for Michel Kenzelmann in:

  7. Search for Laurent Chapon in:

  8. Search for Thomas Lippert in:

  9. Search for Manfred Fiebig in:

  10. Search for Christof W. Schneider in:

  11. Search for Christof Niedermayer in:

Contributions

K.S. and S.Mukherjee contributed equally to this work. The strained films were prepared by K.S. along with structural and electric characterizations of all the samples. Neutron diffraction data were collected by S. Mukherjee, J.S.W., L.C., and C.N., and analysed by S.Mukherjee, J.S.W., and C.N. SHG measurements were conducted by S.Manz under the supervision of M.T. and M.F. The study was planned by K.S. and S.Mukherjee and supervised by M.K., T.L., C.W.S., and C.N. The manuscript was prepared by K.S., S.Mukherjee, and S.Manz with input from all co-authors.

Competing interests

The authors declare no competing financial interests.

Corresponding authors

Correspondence to Christof W. Schneider or Christof Niedermayer.

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Creative Commons BYThis work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/