Abstract
Using carbon dioxide (CO2) as a feedstock for commodity synthesis is an attractive means of reducing greenhouse gas emissions and a possible stepping-stone towards renewable synthetic fuels1,2. A major impediment to synthesizing compounds from CO2 is the difficulty of forming carbon–carbon (C–C) bonds efficiently: although CO2 reacts readily with carbon-centred nucleophiles, generating these intermediates requires high-energy reagents (such as highly reducing metals or strong organic bases), carbon–heteroatom bonds or relatively acidic carbon–hydrogen (C–H) bonds3,4,5. These requirements negate the environmental benefit of using CO2 as a substrate and limit the chemistry to low-volume targets. Here we show that intermediate-temperature (200 to 350 degrees Celsius) molten salts containing caesium or potassium cations enable carbonate ions (CO32–) to deprotonate very weakly acidic C–H bonds (pKa > 40), generating carbon-centred nucleophiles that react with CO2 to form carboxylates. To illustrate a potential application, we use C–H carboxylation followed by protonation to convert 2-furoic acid into furan-2,5-dicarboxylic acid (FDCA)—a highly desirable bio-based feedstock6 with numerous applications, including the synthesis of polyethylene furandicarboxylate (PEF), which is a potential large-scale substitute for petroleum-derived polyethylene terephthalate (PET)7,8. Since 2-furoic acid can readily be made from lignocellulose9, CO32–-promoted C–H carboxylation thus reveals a way to transform inedible biomass and CO2 into a valuable feedstock chemical. Our results provide a new strategy for using CO2 in the synthesis of multi-carbon compounds.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Mikkelsen, M., Jorgensen, M. & Krebs, F. C. The teraton challenge. A review of fixation and transformation of carbon dioxide. Energ. Environ. Sci. 3, 43–81 (2010)
Aresta, M., Dibenedetto, A. & Angelini, A. Catalysis for the valorization of exhaust carbon: from CO2 to chemicals, materials, and fuels. Technological use of CO2 . Chem. Rev. 114, 1709–1742 (2014)
Mander, L. N., Adreatta, J. R. & Darensbourg, D. J. Carbon dioxide. Encyclopedia of Reagents for Organic Synthesis (e-EROS) http://onlinelibrary.wiley.com/doi/10.1002/047084289X.rc011.pub2/full (2008)
Cai, X. & Xie, B. Direct carboxylative reactions for the transformation of carbon dioxide into carboxylic acids and derivatives. Synthesis 45, 3305–3324 (2013)
Liu, A. H., Yu, B. & He, L. N. Catalytic conversion of carbon dioxide to carboxylic acid derivatives. Greenhouse Gas. Sci. Technol. 5, 17–33 (2015)
Werpy, T. et al. Top value added chemicals from biomass. In Results of Screening for Potential Candidates from Sugars and Synthesis Gas Vol. 1, 26–28, http://www.nrel.gov/docs/fy04osti/35523.pdf (US DOE, 2004)
Eerhart, A. J. J. E., Faaij, A. P. C. & Patel, M. K. Replacing fossil based PET with biobased PEF; process analysis, energy and GHG balance. Energ. Environ. Sci. 5, 6407–6422 (2012)
de Jong, E., Dam, M., Sipos, L. & Gruter, G. Furandicarboxylic acid (FDCA), a versatile building block for a very interesting class of polyesters. Biobased Monomers Polymers Mater. 1105, 1–13 (2012)
Lange, J. P., van der Heide, E., van Buijtenen, J. & Price, R. Furfural—a promising platform for lignocellulosic biofuels. ChemSusChem 5, 150–166 (2012)
Cleland, W. W., Andrews, T. J., Gutteridge, S., Hartman, F. C. & Lorimer, G. H. Mechanism of Rubisco: the carbamate as general base. Chem. Rev. 98, 549–562 (1998)
Mani, K. Electrodialysis water splitting technology. J. Membr. Sci. 58, 117–138 (1991)
Davis, J. R., Chen, Y., Baygents, J. C. & Farrell, J. Production of acids and bases for ion exchange regeneration from dilute salt solutions using bipolar membrane electrodialysis. ACS Sustainable Chem. Eng. 3, 2337–2342 (2015)
Barve, P. P., Kamble, S. P., Joshi, J. B., Gupte, M. Y. & Kulkarni, B. D. Preparation of pure methyl esters from corresponding alkali metal salts of carboxylic acids using carbon dioxide and methanol. Ind. Eng. Chem. Res. 51, 1498–1505 (2012)
Dingyi, Y. & Yugen, Z. The direct carboxylation of terminal alkynes with carbon dioxide. Green Chem. 13, 1275–1279 (2011)
Kudo, K., Ikoma, F., Mori, S. & Sugita, N. Synthesis of glutaconic acid salt from cesium 3-butenoate with carbon dioxide. J. Jpn. Petrol. Inst. 38, 48–51 (1995)
Vechorkin, O., Hirt, N. & Hu, X. Carbon dioxide as the C1 source for direct C-H functionalization of aromatic heterocycles. Org. Lett. 12, 3567–3569 (2010)
van Putten, R. J. et al. Hydroxymethylfurfural, a versatile platform chemical made from renewable resources. Chem. Rev. 113, 1499–1597 (2013)
Román-Leshkov, Y., Chheda, J. N. & Dumesic, J. A. Phase modifiers promote efficient production of hydroxymethylfurfural from fructose. Science 312, 1933–1937 (2006)
Binder, J. B. & Raines, R. T. Simple chemical transformation of lignocellulosic biomass into furans for fuels and chemicals. J. Am. Chem. Soc. 131, 1979–1985 (2009)
da Costa Lopes, A. M. & Bogel-Łukasik, R. Acidic ionic liquids as sustainable approach of cellulose and lignocellulosic biomass conversion without additional catalysts. ChemSusChem 8, 947–965 (2015)
Luterbacher, J. S. et al. Nonenzymatic sugar production from biomass using biomass-derived gamma-valerolactone. Science 343, 277–280 (2014)
Sheldon, R. A. Green and sustainable manufacture of chemicals from biomass: state of the art. Green Chem. 16, 950–963 (2014)
Hoydonckx, H., Van Rhijn, W., Van Rhijn, W., De Vos, D. & Jacobs, P. Furfural and derivatives. Ullmann’s Encyclopedia of Industrial Chemistry 16, 285–313 http://onlinelibrary.wiley.com/doi/10.1002/14356007.a12_119.pub2/full (Wiley-VCH, 2007)
Taarning, E., Nielsen, I. S., Egeblad, K., Madsen, R. & Christensen, C. H. Chemicals from renewables: aerobic oxidation of furfural and hydroxymethylfurfural over gold catalysts. ChemSusChem 1, 75–78 (2008)
Thiyagarajan, S., Pukin, A., van Haveren, J., Lutz, M. & van Es, D. S. Concurrent formation of furan-2, 5-and furan-2, 4-dicarboxylic acid: unexpected aspects of the Henkel reaction. RSC Adv. 3, 15678–15686 (2013)
Fischer, R. & Fišerová, M. One-step synthesis of furan-2, 5-dicarboxylic acid from furan-2-carboxylic acid using carbon dioxide. ARKIVOC Online J. Org. Chem. 4, 405–412 (2013)
Fraser, R. R., Mansour, T. S. & Savard, S. Acidity measurements in THF. V. Heteroaromatic compounds containing 5-membered rings. Can. J. Chem. 63, 3505–3509 (1985)
Renaud, P. & Fox, M. A. An electrochemical characterization of dianions: dilithiated carboxylic acids. J. Am. Chem. Soc. 110, 5705–5709 (1988)
Kudo, K. et al. Carboxylation of cesium 2-naphthoate in the alkali metal molten salts of carbonate and formate with CO2 under high pressure. J. Jpn. Petrol. Inst. 38, 40–47 (1995)
Diban, N., Aguayo, A. T., Bilbao, J., Urtiaga, A. & Ortiz, I. Membrane reactors for in situ water removal: a review of applications. Ind. Eng. Chem. Res. 52, 10342–10354 (2013)
Acknowledgements
We thank Stanford University and the Henry and Camille Dreyfus Foundation for support of this work through a Teacher-Scholar Award to M.W.K. G.R.D. gratefully acknowledges a fellowship through the Stanford Center for Molecular Analysis and Design, and T.Y. acknowledges a Postdoctoral Fellowship for Research Abroad through the Japan Society for the Promotion of Science. We thank T. Veltman for installation of the Parr reactor, S. Lynch for assistance with 2H NMR, and J. Du Bois for discussions. High-resolution mass spectrometry was performed at the Vincent Coates Foundation Mass Spectrometry Laboratory, Stanford University Mass Spectrometry.
Author information
Authors and Affiliations
Contributions
M.W.K. and A.B. conceived the project. A.B., G.R.D. and T.Y. performed the experiments. M.W.K., A.B. and G.R.D. wrote the paper. All authors contributed to the analysis and interpretation of the data.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Extended data figures and tables
Extended Data Figure 1 NMR spectra for the carboxylation of caesium furan-2-carboxylate under flowing CO2.
a, 1H NMR (300 MHz) and b, 13C NMR (100 MHz) in D2O of the crude product mixture after the reaction of 1 mmol caesium furan-2-carboxylate and 0.55 mmol Cs2CO3 under CO2 flowing at 40 ml min–1 at 260 °C for 12 h. f1 indicates the chemical shift, δ.
Extended Data Figure 2 NMR spectra for the carboxylation of caesium thiophene-2-carboxylate.
a, 1H NMR (300 MHz) and b, 13C NMR (100 MHz) in D2O of the crude product mixture after the reaction of 1 mmol caesium thiophene-2-carboxylate and 0.55 mmol Cs2CO3 under CO2 flowing at 40 ml min–1 at 325 °C for 12 h.
Extended Data Figure 3 NMR spectra for the carboxylation of caesium furan-2-carboxylate in the Parr reactor.
a, 1H NMR (300 MHz) in D2O of the crude product mixture after the reaction of 1 mmol caesium furan-2-carboxylate and 0.55 mmol Cs2CO3 under 8 bar CO2 at 200 °C for 5 h. b, 1H NMR (300 MHz) in D2O of the crude product mixture after the reaction of 10 mmol caesium furan-2-carboxylate and 5.5 mmol Cs2CO3 under 8 bar CO2 at 200 °C for 10 h.
Extended Data Figure 4 NMR spectra for the carboxylation of caesium benzoate.
a, 1H NMR (300 MHz) and b, 13C NMR (100 MHz) in D2O of the crude product mixture after the reaction of 1 mmol caesium benzoate and 0.55 mmol Cs2CO3 under 8 bar CO2 at 320 °C for 5 h.
Extended Data Figure 5 NMR spectra for the carboxylation of potassium furan-2-carboxylate and benzene.
a, 1H NMR (600 MHz) in D2O of the crude product mixture after the reaction of 0.5 mmol potassium furan-2-carboxylate, 0.5 mmol potassium isobutyrate and 0.28 mmol K2CO3 under CO2 flowing at 40 ml min–1 at 320 °C for 8 h. b, 1H NMR (600 MHz) of the crude product mixture after the reaction in D2O of a 1.5 mmol of caesium carbonate and 1 mmol caesium isobutyrate under 42 bar benzene and 31 bar CO2 at 350 °C for 8 h.
Extended Data Figure 6 1H NMR spectra for H/D exchange between furan-2-carboxylate and deuterated acetate in the presence of Cs2CO3.
a, 1H NMR (400 MHz) in D2O of a 1:1 mixture of caesium furan-2-carboxylate and CD3CO2Cs. b, 1H NMR (400 MHz) in D2O of the crude product mixture after the reaction of a 1:1 mixture of caesium furan-2-carboxylate and CD3CO2Cs with 0.55 equivalents Cs2CO3 at 200 °C under 2 bar N2 for 1 h.
Extended Data Figure 7 Additional NMR spectra for H/D exchange between furan-2-carboxylate and deuterated acetate in the presence of Cs2CO3.
a, 13C NMR (75 MHz) and b, 2H NMR (92 MHz) in D2O of the crude product mixture after the reaction of a 1:1 mixture of caesium furan-2-carboxylate and CD3CO2Cs with 0.55 equivalents Cs2CO3 at 200 °C under 2 bar N2 for 1 h.
Extended Data Figure 8 NMR spectra for H/D exchange between furan-2-carboxylate and deuterated acetate in the absence of Cs2CO3.
a, 1H NMR (400 MHz) and b, 2H NMR (92 MHz) in D2O of the crude product mixture after the reaction of a 1:1 mixture of caesium furan-2-carboxylate and CD3CO2Cs at 200 °C under 2 bar N2 for 1 h.
Extended Data Figure 10 NMR spectra for the Cs2CO3 recycling experiment.
a, 1H NMR (400 MHz) in CDCl3 of the DMFD isolated after the second carboxylation/esterification sequence. b, 1H NMR (400 MHz) in D2O of the material recovered from the aqueous phase after the second carboxylation/esterification sequence.
Rights and permissions
About this article
Cite this article
Banerjee, A., Dick, G., Yoshino, T. et al. Carbon dioxide utilization via carbonate-promoted C–H carboxylation. Nature 531, 215–219 (2016). https://doi.org/10.1038/nature17185
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nature17185
This article is cited by
-
Progress and roadmap for electro-privileged transformations of bio-derived molecules
Nature Catalysis (2024)
-
EPDM rubber-based membranes for electrochemical water splitting and carbon dioxide reduction reactions
Journal of Solid State Electrochemistry (2023)
-
Structured Porous Carbon-Based Catalysts: Cu–ZnO/CMK-3 and Cu–CeO2/CMK-3 for Direct CO2 Conversion to Methanol
Topics in Catalysis (2023)
-
1,4-Cyclohexanedimethanol-based polyesters derived from biomass: synthesis, thermal properties, crystallization properties, and tensile properties
Polymer Bulletin (2023)
-
Catalytic conversion of 2,5-furandicarboxylic acid production from hemicellulose
Biomass Conversion and Biorefinery (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.