## Abstract

Breaking diffraction limitation is one of the most important issues and still remains to be solved for the demand of high-density optoelectronic components, especially for the photolithography industry. Since the scattered signals of fine feature (i.e. the size is smaller than half of the illuminating wavelength *λ*) are evanescent, these signals cannot be captured by using conventional glass- or plastic-based optical lens. Hence the corresponding fine feature is lost. In this work, we propose and analyze a magnetically controlled InSb-dielectric multi-layered structure with ability of subwavelength resolution at THz region. This layered structure can resolve subwavelength structures at different frequencies merely changing the magnitude of external magnetic field. Furthermore, the resolving power for a fixed incident frequency can be increased by only increasing the magnitude of applied external magnetic field. By using transfer matrix method and effective medium approach, the mechanism of achieving super resolution is elucidated. The electromagnetic numerical simulation results also prove the rationality and feasibility of the proposed design. Because the proposed device can be dynamically reconfigured by simply changing the magnitude of external magnetic field, it would provide a practical route for multi-functional material, real-time super-resolution imaging, and photolithography.

## Introduction

Recently, for acquiring subwavelength image, some plasmonic-based artificial materials that possess the ability to deliver high spatial frequencies (which correspond to fine features of the objects to be resolved) have been explored, such as superlens^{1,2,3}, multi-layered based hyperlens^{4,5,6,7,8,9,10} and hybrid-superlens hyperlens^{11,12,13}. However, the constituent conditions of the used materials that are required to satisfy the criteria of achieving subwavelength resolution are quite rigorous. Hence the working wavelength band region is very limited (i.e. single-wavelength resolution) for the highly dispersive characteristic of the materials^{4,11}. From a practical point of view, broadening the bandwidth of achieving subwavelength resolution is an important issue for many application-related imaging techniques.

The indium antimonide (InSb)–dielectric interface can support propagation of surface plasmon (SPs) under illumination of terahertz light source^{14}. In an external magnetic field, the SPs are transformed into the surface magnetoplasmons (SMPs)^{15}. Due to the tunable optical properties of InSb (which can be tailored by external magnetic field^{16}, temperature^{17}, and doping^{18}), it has attracted much attention from the entire world. Recently, many InSb-based tunable optoelectronic components (they are managed by applying an external magnetic field) have been investigated, such as tunable terahertz metamaterial^{19}, broadly tunable one-way waveguide^{20}, actively focal-length-control plane lens^{21} and magnetic lens^{22}. The coupling effects between the constituent materials via SMPs that exist in the above mentioned function also play an important role in the layered system with the function of subwavelegth solution^{4,23,24}. Therefore, by replacing the metal material with InSb, a periodically arranged InSb-dielectric multi-layered hyperlens at the THz region with adjustable resolving power and operating frequency will be achieved.

In order to obtain subwavelength imaging with the inclusion of tunability and realizability, the propagation behavior of the scattered signals from the objects to be resolved (especially the information of high order spatial frequency) in the hyperlens should be well controlled. Furthermore, the energy of corresponding information cannot be dissipated until it is captured by the detector (or microscopy). Here, we use a multi-layered InSb-dielectric structure under an external magnetic field as the hyperlens in which all the scattered signals can be transferred from the source to the detector. In order to accomplish the desired hyperlens, the optical properties (effective relative permittivity) and isofrequency curve of InSb-dielectric multi-layered structure under various magnitude of external magnetic field are investigated first. The corresponding requirements of achieving subwavelength resolution under specific values of external magnetic are also derived. Finally, the abilities of subwavelength resolution of the proposed structures with adjustable resolving power and operating frequency are demonstrated. We point out a practical approach to control all the diffraction signals toward a specific direction by using transfer matrix method and effective medium theory. Numerical calculations and computer simulation (based on finite element method, FEM) are carried out, which agree well with each other.

## Results

Figure 1(a) presents the schematic diagram of investigated structure under the illumination of THz light source. The semiconductor and dielectric materials are InSb and PMMA, respectively (Method). The dielectric constant of PMMA is set to 2.5. A chromium (Cr) mask (with two slits, which represent the resolved objects) is put on the top of the periodically arranged multi-layered structure. A uniform magnetic field *B* is applied in the system, which can be accomplished by using two large magnets with different magnetism. Here, the Voigt configuration (*B* is parallel to the interface between different media and perpendicular to the wave propagation direction *k*^{15}) and TM mode incident light source (the electric fields are in the *xy*-plane) are considered. In this configuration, the components of dielectric tensor of the semiconductor depend on the magnitude of *B*. (tensor, Method)

To prove our concept, the propagation property of delivered wave (after passing through the slits, as shown in Fig. 1(b)) in the layered system should be clarified first. Considering the Maxwell–Faraday equation the *H*_{z} and *E*_{y} components in the semiconductor (the subscript 1) and dielectric (the subscript 2) regions can be respectively expressed as,

where and ; is Voigt dielectric constant of InSb. Further, taking into account the continuous boundary and Bloch conditions at the InSb-dielectric interface (that is, and , where *a* = *d*_{1} + *d*_{2}), the nontrivial solution would be obtained by calculating the determine shown as below,

Reorganizing Eq. (5) will yield the dispersion relation of the layered structure (see Appendix A of supplementary information)

Equation (6) can be further simplified by using Taylor expansion (up to second order), a long wavelength approximation (*λ* and denote the incident wavelength in free space and period length, respectively), and considering The dispersion relation of the layered system with inclusion of the effect of external magnetic field will become as bellow

where and are the effective relative permittivities of the equivalent anisotropic material in the *y* and *x*-directions, respectively, as shown in Fig. 1(c); *k*_{0} is the wave vector in free space.

For achieving subwavelength resolution, the isofrequency dispersion curves of the proposed layered structure need to be hyperbolic form and as flat as possible. To meet this requirement, the conditions: and need to be satisfied^{4,5}. (As occurs, the dispersion curve would be elliptic. See Appendix B of supplementary information.) Under an external magnetic field, the conditions are transferred to () and . (Method) (Note that, in this study, the dielectric constant of PMMA is set to 2.5. For fulfilling the above mentioned criteria, the value of *ε*_{v} should be close to −2.5.) Moreover, since the effective dielectric tensor of InSb is altered by the applied external magnetic field, the isofrequency dispersion curve is also expected to change with the external magnetic field. Figure 2 plots the isofrequency dispersion curves (based on numerical calculations of Eq. (7)) of the investigated layered structure under various values of external magnetic field *B* at incident frequency of 1 THz. Figure 2 shows that, when no magnetic field is applied, the designed layered structure in Fig. 1(b) possesses the hyperbolic isofrequency dispersion curve. However, the slope () of the hyperbolic curve is large. Figure 2 also indicates that, when the magnetic field is applied, the dispersion curves still keep the hyperbolic form. However, the slope of the curve decreases with the increase of the magnitude of magnetic field. It implies that the wave’s propagation properties can be manipulated by the applied magnetic field. It is worth to mention that, for the goal of subwavelength resolution, the operating condition of red line (*B* = 4.14 Tesla) in Fig. 2 is better because of its ultra-flat hyperbolic curve^{4,5}. All the scattered signals come from the objects to be resolved (the two slits) in the layered system can transfer to the output side without producing interference. The corresponding simulation result for achieving subwavelength resolution is shown in Fig. 3(d).

Figure 3(a) plots the calculated values of *ε*_{v} versus the magnitude of external magnetic field *B* at incident light frequencies (*f* ) of 1 THz and 3.16 THz. For incident frequency of 1 THz, Fig. 3(a) indicates that the value of *ε*_{v} is −3.0 as the magnitude of applied magnitude *B* equals to 4.14 Tesla. It implies that the two slits can be successfully resolved by using this value of *B* (around 4.14 Tesla) at 1 THz. Using other values of *B*, the subwavelength resolution would not be achieved due to violation of Conversely, for *f* = 3.16 THz (also in Fig. 3(a)), no suitable value of *B* can achieve subwavelength resolution because all the values of *ε*_{v} are positive. Figure 3(b) redraws the isofrequency curves at 1 THz (Fig. 2) for *B* equal to 0 and 4.14 Tesla. The same hyperbolic form but different slope reveals that, for both *B* values, all the excited high-order evanescent signals can be transferred into propagation mode inside the layered structure but have different propagation directions. The propagation direction in the layered structure can be determined by the formula as the arrows shown in Fig. 3(b). For the case of *B* = 4.14 Tesla, the slope of dispersion curve is very small and the pass-through signals will propagate along *x*-direction. Hence, the interference between the scattered waves from the two slits is expected to be avoidable. The corresponding simulated results for *B* equal to 0 and 4.14 Tesla at 1 THz are conducted and presented in Fig. 3(c,d), respectively. Figure 3(d) displays that the two slits can be resolved at the end of the proposed structure for *B* = 4.14 Tesla, which is consistent with analyses of the dispersion curves. Notably, Fig. 3(d) also exhibits a unidirectional SMPs propagation along –y direction. The propagation of SMPs along + *y* direction is suppressed (marked by the white dashed line in Fig. 3(d)). Furthermore, it is non-reciprocal (i.e. the propagation direction of SMPs will be opposite when the direction of the applied magnetic field is reversed). The non-symmetrical and non-reciprocal properties of SMP are ascribed to the combined effect of cyclotron motion and plasma oscillation of free electron in the semiconductor^{25} (See Appendix C of supplementary information).

As mentioned above, the value of *ε*_{v} can be tuned by changing the magnitude of external magnetic field *B*. Our calculations reveal that, for a fixed center-to-center distance of the slits (here 100 *μ*m), the resolvable incident frequency gradually increases as reducing the value of *B* within some specific frequency region. For instance, the magnetic field decreases from 3.66 to 2.94 Tesla, the corresponding resolved frequency increases from 1.1 to 1.3 THz. To verify this prediction, the corresponding simulation results are also provided. Figure 4(a,d,g) present the calculated isofrequencies for the structure of Fig. 1(b) under the values of applied magnetic field and incident frequency, (*B, f* ), equal to (3.66 Tesla, 1.1 THz), (3.26 Tesla, 1.2 THz), and (2.94 Tesla, 1.3 THz), respectively. In Fig. 4(a,d,g), the maximum value of transverse wavevector (k_{y}) of the separated slits is denoted as the black dashed line. Here this value is defined as the first zero of sinc function (i.e. the Fourier transformation of a rectangular function). Following the formula the corresponding propagation directions are nearly parallel to the *x*-axis. Therefore, the two slits can be successfully resolved on the other side of the hyperlens as shown in Fig. 4(b,e,h).

Finally, the dependence of achievable resolving power on the magnitude of external magnetic field for a fixed incident frequency is examined. Figure 5 plots the simulation results of the minimum resolvable distance between two slits for different values of magnetic field at 1 THz. Figure 5 indicates that, the resolving power of the layered structure is increased by only increasing the magnitude of the applied magnetic field (the incident frequency and structure are unchanged). Therefore, in the proposed layered structure, the resolving power can be manipulated by the magnitude of applied magnetic field that is similar to the adjustable object lenses of a microscope with different magnifications. Some other useful phenomena based on the SMPs, such as magneto-optical transparency^{26} and interference-induced transparency^{27}, can also be implemented by using the proposed design. Moreover, due to its tunability (including the effective permittivity and the value of *B*), the proposed layered structure has a wide range of potential application in different field such as magnetic recording^{28}, magnetoplasmonic crystal^{29}, and one-way waveguide^{30}.

For further demonstrating the ability of subwavelength resolution of the proposed structures, the images of double slits embedded in various materials are also examined. Figure 6(a,b) plot the simulated time-averaged power flow contours for the double slits embedded in air and in Si (Method), respectively, at 1 THz. In addition, Fig. 6(c) presents the same simulated contours for the double slits on a uniform Si plate. For comparison, the simulated contours in Fig. 5(e) are replotted in Fig. 6(d). The corresponding normalized intensities versus y position measured at the dashed yellow lines (the measure position is the same as Fig. 4) are also plotted in Supplementary Information (Appendix D). Figure 6(a–c) indicate that the two slits can be distinguished at the x position very close to the slits. However, at the position of dashed yellow line, the double slits only can be resolved by the proposed layered structure with *B* = 4.14 Tesla.

Notably, the loss in the proposed layered structure cannot be ignored. The decay of intensity of the propagating wave in the multilayered structure is also examined (See Appendix E of Supplementary Information). The simulation result shows that the intensity of the propagating wave at the position of image measurement (i.e. the dashed yellow lines in Fig. 6) is reduced to about one-twentieth of that at the exit of slit. However, as demonstrated in Fig. 6, the double slits only can be resolved by the proposed layered structure at this position and at the bottom of the structure. Actually, if we add more layers in the layered structure, the double slits are still resolved at the bottom of the structure. Therefore, our proposed concept for subwavelength resolution is useful.

## Discussion

A semiconductor-based hyperlens with magnetic tunability at terahertz region is proposed and analyzed. The FEM electromagnetic simulations verify the design of the proposed structure to achieve subwavelength resolution. The super resolution of the proposed device under different frequencies is accomplished by merely changing the magnitude of the external magnetic field. The resolving power for a fixed incident frequency can be increased by only increasing the magnitude of applied magnetic field. More importantly, to illustrate the physical reliability, the constituent materials of achieving super resolution are available in nature. Hence, our methodology provide a way to multi-functional material, real-time subwavelength imaging, and high-density optoelectronic components with considering the effects of abnormal diffraction feature. It will provide us a path to overcome the major issue of biological image studies.

## Methods

All the simulated results shown in Figs 3, 4, 5 are conducted from the commercial electromagnetic software COMSOL Multiphysics based on the finite element numerical method. For modeling our proposed subwavelength resolution, a layered structure and two resolved slits (the center-to-center distance is smaller than half of *λ*) carved on Cr mask are investigated, as shown in Fig. 1(b). Here, a practical design based on existing materials and experiment technique is presented to illustrate that the function of subwavelength resolution can be really achieved. The simulated dielectric tensor of InSb with considering the Voigt configuration can be written as^{15},

where *ω* is the angular frequency of incident wave; and presents the cyclotron frequency, which can be tuned by the applied magnetic field. is the plasma frequency, where *N, e, m*^{*} are the density, the electron charge, and the effective mass of free electron, respectively. *ε*_{∞}(*ε*_{0}) is the high-frequency (vacuum) permittivity. Note that, the used parameters of InSb at room temperature are *ω*_{p} = 2 × 10^{13}(rad/s), *ε*_{∞} = 15.68, and *m*^{*} = 0.014*m*^{0} ^{31}. The investigated values of magnetic field *B* are also within an available range^{32}. The dielectric constant at investigated region of PMMA is 2.5, which is adopted from literature^{33}. The dielectric constant of Si at terahertz region comes from literature^{34} (which is about 3.4 at 1 THz). A TM-polarized light (polarized in the y direction) is normally incident from the top. The perfectly matched layers (PMLs) are used in all propagating directions.

Note that, the both two cases shown in Fig. 3(b) fulfill the basic requirement (i.e. the hyperbolic dispersion relation) that the evanescent higher-order modes are transferred into propagating modes inside the multi-layered structure. For resolving subwavelength objects, the propagation direction of the corresponding energy also needs to be determined. Due to the dispersion relation Eq. (7) can be simplified as

The propagation direction of the transferred signals can be decided by

where *θ* presents the angle between the propagation direction and the normal direction (see Fig. 1(b)) inside the layered structures. For obtaining higher resolution, *θ* needs to be as small as possible. A smaller value of *θ* will prevent the interference between the tunneling signals that come from the two slits. Conventionally, by fine tuning the parameters *d*_{1}, *d*_{2}, *ε*_{1} and *ε*_{2}, both the effective parallel permittivity *ε*_{y} nearly equal to zero and a small value of *θ* can be obtained. Here we demonstrate that only tuning the magnitude of applied magnetic field *B* can also achieve this purpose in the proposed layered structures. The simulated time-averaged power flow contours are shown in Fig. 3(c,d).

## Additional Information

**How to cite this article**: Cheng, B. H. *et al.* Magnetically controlled planar hyperbolic metamaterials for subwavelength resolution. *Sci. Rep.* **5**, 18172; doi: 10.1038/srep18172 (2015).

## References

- 1.
Smith, D. R., Schurig, D., Rosenbluth, M. & Schultz, S. Limitations on subdiffraction imaging with a negative index slab.

*Appl. Phys. Lett.***82**, 1506–1508 (2003). - 2.
Cai, W., Genov, D. A. & Shalaev, V. M. Superlens based metal-dielectric composites.

*Phys. Rev. B***72**, 193101 (2005). - 3.
Schilling, A., Schilling, J., Reinhardt, C. & Chickov, B. A superlens for the deep ultraviolet.

*Appl. Phys. Lett.***95**, 121909 (2009). - 4.
Wood, B., Pendry, J. B. & Tsai, D. P. Directed subwavelength imaging using a layered metal-dielectric system.

*Phys. Rev. B***74**, 115116 (2006). - 5.
Salandrino, A. & Engheta, N. Far-field subdiffraction optical microscopy using metamaterial crystals: theory and simulations.

*Phys. Rev. B***74**, 075103 (2006). - 6.
Jacob, Z., Alekseyev, L. V. & Narimanov, E. Optical hyperlens: far-field imaging beyond the diffraction limit.

*Opt. Express***14**, 8247–8256 (2006). - 7.
Liu, Z., Lee, H., Xiong, Y., Sun, C. & Zhang, X. Far-field optical hyperlens magnifying sub-diffraction-limited objects.

*Science***315**, 1686 (2007). - 8.
Poddubny, A., Iorsh, I., Belov, P. & Kivshar, Y. Hyperbolic metamaterials.

*Nat. Photonics***7**, 948–957 (2013). - 9.
Cheng, B. H., Chang, K. J., Lan, Y. C. & Tsai, D. P. Actively controlled super-resolution using graphene-based structure.

*Optics Express***22**, 28635–28644 (2014). - 10.
Cheng, B. H., Chang, K. J., Lan, Y. C. & Tsai, D. P. Achieving planar plasmonic subwavelength resolution using alternately arranged isulator-metal and insulator-insulator-metal composite structures.

*Sci. Rep.***5**, 7996 (2015). - 11.
Cheng, B. H., Ho, Y. Z., Lan, Y. C. & Tsai, D. P. Optical hybrid-superlens-hyperlens for superresolution imaging.

*IEEE J. Sel. Top. Quantum Electron.***19**, 4601305 (2013). - 12.
Wang, Y. T.

*et al.*Gain-assisted Hybrid-superlens-Hyperlens for Nano Imaging.*Opt. Express.***20**, 22953–22960 (2012). - 13.
Cheng, B. H., Lan, Y. C. & Tsai, D. P. Breaking Optical diffraction limitation using Optical Hybrid-Superlens-Hyperlens with Radically Polarized Light.

*Opt. Express***21**, 14898–14906 (2013). - 14.
Marschall, N., Fischer, B. & Queisser, H. J. Dispersion of surface plasmons in InSp.

*Phys. Rev. Lett.***27**, 95–97 (1971). - 15.
Brion, J. J., Wallis, R. F., Hartstein, A. & Burstein, E. Theory of surface magnetoplasmons in semiconductors.

*Phys. Rev. Lett.***28**, 1455–1458 (1972). - 16.
Kushwaha, M. S. & Halevi, P. Magnetoplasmons in thin films in the Voigt configuration.

*Phys. Rev. B***36**, 5960–5967 (1987). - 17.
Halevi, P. & Ramos-Mendieta, F. Tunable photonic crystals with semiconducting constituents.

*Phys. Rev. Lett.***85**, 1875–1878 (2000). - 18.
Rivas, J. G., Kuttge, M., Bolivar, P. H., Kurz, H. & Sánchez-Gil, J. A. Propagation of surface plasmon polaritons on semiconductor gratings.

*Phys. Rev. Lett.***93**, 256804 (2004). - 19.
Han, J., Lakhtakia, A. & Qiu, C.-W. Terahertz metamaterials with semiconductor split-ring resonators for magnetostatic tunability.

*Opt. Express***16**, 14390–14396 (2008). - 20.
Hu, B., Wang, Q. J. & Zhang, Y. Broadly tunable one-way terahertz plasmonic waveguide based on nonreciprocal surface magneto plasmons.

*Opt. Lett.***37**, 1895–1897 (2012). - 21.
Hu, B., Wang, Q. J., Kok, S. W. & Zhang, Y. Active focal length control of terahertz slitted plane lenses by magnetoplasmons.

*Plasmonics***7**, 191–199 (2012). - 22.
Wu, H. H. & Lan, Y. C. Magnetic Lenses of Surface Magnetoplasmons in Semiconductor-Glass Waveguide Arrays.

*Appl. Phys. Express***7**, 032203 (2014). - 23.
Maier, S. A.

*Plasmonics: Fundamentals and Applications*(Springer, 2007). - 24.
He, S., Zhang, X. & He, Y. Graphene nano-ribbon waveguides of record-small mode area and ultra-high effective refractive indices for future VLSI.

*Opt. Express***21**, 30664–30673 (2013). - 25.
Palik, E. D. & Furdyna, J. K. Infrared and microwave magnetoplasma effects in semiconductors.

*Rep. Prog. Phys.***33**, 1193–1322 (1970). - 26.
Belotelov, V. I.

*et al.*Plasmon mediated magneto-optical transparency.*Nature Commun*.**4**, 2128 (2013). - 27.
Wang, X., Belyanin, A. A., Crooker, S. A., Mittleman, D. M. & Kono, J. Interference-induced terahertz transparency in a semiconductor magneto-plasma.

*Nat. Phys*.**6**, 126–130 (2010). - 28.
Pan, L. & Bogy, D. B. Data storage: Heat-assisted magnetic recording.

*Nat. Photonics***3**, 189–190 (2009). - 29.
Belotelov, V. I.

*et al.*Enhanced magneto-optical effects in magnetoplasmonic crystals.*Nature Nanotech*.**6**, 370–376 (2011). - 30.
Yu, Z., Veronis, G., Wang, Z. & Fan, S. One-Way Electromagnetic Waveguide Formed at the Interface between a Plasmonic Metal under a Static Magnetic Field and a Photonic Crystal.

*Phys. Rev. Lett.***100**, 02390201–02390204 (2008). - 31.
Gomez Rivas, J., Janke, C., Bolivar, P. H. & Kurz, H. Transmission of THz radiation through InSb gratings of subwavelength apertures.

*Opt. Express***13**, 847–859 (2005). - 32.
Amet, F.

*et al.*Composite fermions and broken symmetries in graphene.*Nat. Commun.***6**, 5838 (2015). - 33.
Jin, Y. S., Kim, G. J. & Jeon, S. G. Terahertz Dielectric Properties of Polymers.

*J. Korean phys. Soc.***49**, 513–517 (2006). - 34.
Hosako, I. Optical Thin Film Technology Used in the Terahertz Frequency.

*J. Natl. Inst. of Inf. Commun. Tech.***51**, 87–94 (2004).

## Acknowledgements

The authors acknowledge financial support from Ministry of Science and Technology, Taiwan (Grant Nos 101-2112-M-006-002-MY3, 104-2112-M-006-005-MY3, 103-2745-M-002-004-ASP, 102-2911-I-002-505 and 103-2911-I-002-594) and Academia Sinica (Grant No. AS-103-TP-A06). They are also grateful to National Center for Theoretical Sciences, Taipei Office, Molecular Imaging Center of National Taiwan University, National Center for High-Performance Computing, Taiwan, and Research Center for Applied Sciences, Academia Sinica, Taiwan for their support.

## Author information

## Affiliations

### Research Center for Applied Sciences, Academia Sinica, Taipei 115, Taiwan

- Bo Han Cheng
- & Din Ping Tsai

### Department of Photonics and Advanced Optoelectronic Technology Center, National Cheng Kung University, Tainan 70101, Taiwan

- Hong Wen Chen
- , Kai Jiun Chang
- & Yung-Chiang Lan

### Department of Physics, National Taiwan University, Taipei 10617, Taiwan

- Din Ping Tsai

## Authors

### Search for Bo Han Cheng in:

### Search for Hong Wen Chen in:

### Search for Kai Jiun Chang in:

### Search for Yung-Chiang Lan in:

### Search for Din Ping Tsai in:

### Contributions

B.H.C. and H.W.C. jointly conceived the idea. B.H.C., H.W.C. and K.J.C. designed and performed the calculations. Y.C.L. and D.P.T. assisted in the analyzing and discussion of the results. B.H.C., Y.C.L. and D.P.T. prepared the manuscript. Y.C.L. and D.P.T. supervised and coordinated all the work. All authors commented on the manuscript.

### Competing interests

The authors declare no competing financial interests.

## Corresponding authors

Correspondence to Yung-Chiang Lan or Din Ping Tsai.

## Supplementary information

## Word documents

## Rights and permissions

This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/

## About this article

## Further reading

## Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.