Coherent evolution governs the behaviour of all quantum systems, but in nature it is often subjected to influence of a classical environment. For analysing quantum transport phenomena quantum walks emerge as suitable model systems. In particular, quantum walks on percolation structures constitute an attractive platform for studying open system dynamics of random media. Here, we present an implementation of quantum walks differing from the previous experiments by achieving dynamical control of the underlying graph structure. We demonstrate the evolution of an optical time-multiplexed quantum walk over six double steps, revealing the intricate interplay between the internal and external degrees of freedom. The observation of clear non-Markovian signatures in the coin space testifies the high coherence of the implementation and the extraordinary degree of control of all system parameters. Our work is the proof-of-principle experiment of a quantum walk on a dynamical percolation graph, paving the way towards complex simulation of quantum transport in random media.
The development of experimentally feasible quantum simulators that are capable of supporting a wide range of phenomena is presently the target of intensive research1,2,3. Discrete time quantum walks (DTQWs)4,5,6 are regarded as a promising platform for building quantum simulators. Various theoretical studies utilise this model to analyse e.g. the occurrence of localization effects7, topological phases8,9, the mimicking of the formation of molecule states10, and even energy transport in photosynthesis11,12 can be related13. The high level of attracted interest and the applicability of this model system is also reflected by numerous experimental realizations of quantum walks such as in nuclear magnetic resonance14,15, trapped ions16,17, atoms18,19, photonic systems20,21,22,23,24 and waveguides25,26,27,28,29,30,31,32,33. Using a discrete time-multiplexed quantum walk setup34, which provides a versatile and resource efficient system, Anderson localisation35,36 on a one dimensional graph37 and two particle interaction effects based on a two dimensional square lattice38 have been demonstrated. Yet, all experiments to date have been limited to realising the walk on regular, fully connected and static graphs. Varying graph structures39,40,41 lie at the heart of percolation, which is one of the simplest yet non-trivial models at the intersection of several disciplines. The theory of percolation is concerned with the connectivity of random graphs, which in turn can be related to the dynamics of particles, excitations or fluids propagating accross a random medium. The model has been extensively studied in mathematics and physics, with applications ranging from phase transitions to a multitude of transport phenomena42,43,44,45. In the standard percolation model, links between vertices of a finite graph are present or absent with a given probability . A generalisation of the model, known as dynamical percolation45, employs a constantly changing graph, yielding a model optimized to the simulation of randomly evolving – fluctuating medium (even space itself), network or environment. Here, we pick up the idea of combining the percolation model with quantum mechanics, and present its experimental realization based on quantum walks on varying graph structures41,46. The resulting new device is able to simulate quantum effects in imperfect media induced by local perturbations of the graph structure. The programmed randomness plays the role of a fluctuating external field effectively giving rise to open system dynamics exhibiting a rich diversity of subtle decoherence mechanisms.
A quantum walk, defined in analogy with a random walk, is a particular quantum mechanical process on a prescribed graph, which consists of iterative applications of a unitary operator usually called a step, which factorizes as . The coin operator modifies the walker’s internal coin state and is crucial for the non-trivial quantum dynamics, while the shift operator implements transitions across the links of the graph in dependence of the internal state. The extension of quantum walks to dynamical percolation graph structures leads to the concept of percolation quantum walks41 (PQW). Here, a finite set of vertices is considered, and at each step a graph with an edge configuration κ is probabilistically chosen from all possible configurations . On the graph with configuration κ the dynamics is defined in analogy to the DTQW. At the gaps, the shift operator is modified by inserting reflection operators, leading to the shift operator41 . The probabilistic nature of the choice of the configuration κ models an open system dynamics. The evolution of the walker’s state from to is described by the random unitary map (RUM)
where is the probability of each configuration κ. Generally, it is assumed that open dynamics results in the gradual loss of information about the initial state, destroying all coherence. The system evolution under RUM contradicts this intuition and can result in a variety of non-trivial asymptotic states41 attained after a dynamically rich transient regime. The typical characteristics already manifest themselves for a graph describing a linear chain. For their experimental observation we needed to design an apparatus, which is able to provide the following capabilities: first, the implementation of finite graph structures along with the dynamical creation or removal of edges between vertices; second, the easy and quick reconfigurability of the apparatus for the collection of data over the large configuration space in a short time; third, the full access to the coin state to track coherences in the walker’s state during its evolution.
We based our simulator on the time-multiplexing technique34,38. Thus it inherits advantageous features such as remarkable resource efficiency, excellent access to all degrees of freedom throughout the entire time evolution, and stability sustained over many consecutive measurements providing sufficient statistical ensembles. As before the input state is prepared by weak coherent light at the single photon level, which is appropriate for studying any single particle properties of our walk47. Our detection apparatus is adapted to single photon detection, which makes our interference circuit compatible for future multi-particle experiments with coincidence detection. The greatest challenge in this experiment has been the implementation of the dynamically changing shift operator , that realises the reflecting boundary conditions as well as the dynamical creation of edges between vertices.
The implementation of the walk is based on a loop architecture where the walker is realised by an attenuated laser pulse34,38. Its polarization, expressed in the horizontal and vertical basis states and , is used as the internal quantum coin and manipulated by standard linear elements, performing the coin operation . Different fibre lengths in the loop setup introduce a well defined time delay between the polarisation components, where different position states are uniquely represented by discrete time bins (mapping the position information into the time domain). To attain repeated action, we have completed the apparatus with a loop geometry that consists of the two paths A and B (see Fig. 1), similarly to the 2d quantum walk38. In contrast to previous experiments, here one full step of the PQW is executed by two round-trips in the loop architecture, alternating between paths A and B. Additionally to the standard half-wave plate (HWP) in path A (red area) we include a fast electro-optic modulator (EOM) in path B (green area), which now allows to actually change the underlying graph structure, and defines the additional graph operation . It is embedded between two partial shifts making up a full shift operation as thus implementing the unitary . The EOM is programmed to perform the transmission or reflection operation depending on whether a link is present or absent at the particular time encoded position in the configuration κ. Thus, changing the structure or size of the graph requires only a reprogramming of the timings delivered to the EOM. Detection at each step by a pair of avalanche photo diodes gives us access to the time evolution in the coin as well as in the position degree of freedom.
Aiming for the reconstruction of the (reduced) density matrix of the coin at the nth step, we perform a full tomography48 of the coin state, and track its evolution over six full steps. We test our simulator by performing a PQW with a Hadamard coin on a graph consisting of three vertices and at most two links. This choice of system size enables us to observe all relevant dynamical features within limits of the number of possible iterations due to round-trip losses. The sample space for the complete dynamics over n steps corresponds to the set of all possible patterns of length n. A restriction to the configurations , obtained from after removing graphs with both links present or both absent, reduces the size of the experimental sample space to 64 for a 6 step dynamics, while leaving the asymptotic behaviour unaffected (see supplementary material). We realise all configuration patterns from which corresponds to a link probability . The transmission and reflection operations realized by the EOM in the setup yield stationary asymptotic dynamics characterized by the single asymptotic state being the identity. The study of the distance between the completely mixed coin state and our measured thus yields two kind of information. First, it allows us to track how far is the system from the asymptotic state, and second, any increase of the distance from the stationary state, that in our case is the completely mixed state, is a clear signature of non-Markovian evolution in the coin space.
The individual analyses of experimental measurement results for each of the 64 patterns can be used to reveal the extent of accuracy to which the step operators were realized. Residual populations outside the positions −1, 0 and 1 constituted less than 2% on average, confirming the realization of a finite graph. Since an unconfined walker would have spread over a length of 12 sites over the 6 steps, the strong confinement to three sites achieved by a programmable boundary and not by a fixed one32 is remarkable. For horizontally polarised initial states, the experimentally obtained spatial distributions are displayed on Fig. 2 for selected configuration patterns, demonstrating the precision of the implementation of the dynamically changing graph structure.
Quantum percolation walk
We implement the open system dynamics by averaging tomographic data over 64 patterns at each step n, corresponding to taking the average over a fluctuating external field49. The open system dynamics is arises due to the loss of knowledge about the external field, and not due to a coupling to some external quantum heat bath. We reconstruct the reduced coin state by determining the Stokes parameters presented in Fig. 3a. The measured parameters (red lines) are compared both to the ideal model (dotted lines) and to a realistic model incorporating the systematic errors present in the experiment (blue lines). All Stokes parameters are in very good agreement with the theoretical models, S1(n) and S3(n) show the oscillatory behaviour, and S2(n) is zero within the error bars. The systematic errors lead to small deviations only in the amplitude but not in the qualitative form and oscillation periods compared to the ideal model theory. Details on the realistic model and the errorbars can be found in the Methods section. On Fig. 3b we present the Hilbert–Schmidt distance50 of our measured density matrix from the completely mixed state . (See the supplementary material and extended data figures for vertically polarised input.)
The initially pure reduced state (at distance 0.5, not shown on the plot) becomes completely mixed in a single step, however soon the distance increases. The observed curve is part of an oscillatory evolution41 that eventually decays to the maximally mixed state for the set of coin operators used in the experiment. The non-Markovian behaviour reflected in the revival from the completely mixed state is the witness that between the position and the coin degree of freedoms sufficient coherence survives the averaging over 64 patterns. The excellent agreement with the realistic model proves that the evolution is dominantly dictated by the controlled random unitary evolution, and other sources of decoherence, such as dephasing, are negligible.
In summary, we have demonstrated the percolation quantum walk over 6 steps using a quantum simulator exploiting enhanced time-multiplexing techniques. As a highlight, our system is capable of realizing the walk on arbitrary, dynamically changing linear graph structures in a programmable way. By its design the device allows access to internal and external degrees of freedom, facilitating the study of their intricate interplay, in particular revealing the exchange of coherences. The clear revival of coherences in the coin state obtained by tomographic measurements confirms the precise control of the open system dynamics, and prove the sustained high stability of the system.
Our work paves the road to study coherence properties of systems with changing connectivity for materials resembling in structure and function grainy or porous substances. While losses restrict our proof-of-principle experiment there is no geometric limitation on the size of the graph. Classical light sources and amplification can be used for studying coherence properties over 300 steps51. Prospective phenomena to investigate experimentally include boundary induced effects such as edge states52 and non-trivial asymptotic behaviour, transport on percolation structures, and critical phenomena in higher dimensions. The introduction of multiple single photon states in a system without amplifiers, will open the route for the full experimental exploration of quantum interference effects in percolated media.
The laser used in the experiment is a diode laser with a central wavelength of 805 nm. It produces pulses of approximately 88 ps FWHM duration which are attenuated by several neutral density filters to a level of about 135 photons per pulse after the incoupling mirror of the experiment. This leads to only 1.2 photons arriving at the detectors in the first step relevant to our measurements, whereas the overall round trip losses sum up to 50%. The main contributions are the coupling losses at the fibres and the losses at the incoupling and outcoupling mirrors, where we probabilistically couple 0.2% into the setup and 7% out at each round trip. The repetition rate is variable and chosen with respect to the duration of a full quantum walk. To realise the partial shift two single mode fibres of 135 m and 145 m length have been used leading to a position separation of 46 ns. This allows for 13 occupied positions without any overlap and signifies the maximum possible system size with this specific set of fibres. The EOM and its characteristics are discussed in the next section. The detectors used are silicon-based avalanche photo diodes operating in Geiger mode with a dead time of about 50 ns and detection efficiencies around 65%. The single photon detectors were chosen since their dynamic range is more accessbile in comparison to regular photo diodes, and also as a preparation for future genuine single photon input.
Characteristics and description of the EOM.
The operation of the electro-optic modulator (EOM) in our experiment is based on the Pockels effect. It has a rise time of below 5 ns and can switch faster than 50 ns between consecutive switchings, which is comparable to the distance between neighbouring positions in the quantum walk. The switched pattern can be an arbitrary non-periodic signal, however some technical restrictions apply. It consists of two identical birefringent crystals with their optical axes rotated relative to each other by 90° to compensate for their natural birefringence inducing a phase φ. By applying a voltage U an additional phase retardation ϕU can be achieved. The pair of crystals are rotated by 45° with respect to the horizontal and vertical polarisation axes defined by the polarising beam splitters in our setup. The action of the EOM on arbitrary polarization states is given in the basis by the matrix
For ϕU = 0 (at U = 0) the EOM realises the transmission operator , and for an appropriate choice of U yielding the reflection operator , with
The realistic model and calculation of errorbars.
We have identified four sources of systematic errors to define a realistic model of our experiment: first, the detector and power dependent detection efficiencies, which were determined in a separate measurement; second, the different losses experienced in different paths due to dissimilar coupling efficiencies and path geometries, which were similarly estimated in an independent measurement with an accuracy of ±2%; third, the transmission through the (switched) EOM is greater than 98%, but not exactly known; fourth, the angle of the HWP defining can be set only with a precision of 0.2°.
The power dependence of the detector efficiencies is constant from the second step on since the power in our experiment drops exponentially from step to step. To keep the number of parameters small, the resulting correction factor for the final steps was applied as a global correction factor yielding larger errors for the first step resulting in larger errorbars. For the determination of the parameters of the other three errors we resorted to a numerical model. We manually varied the parameters in the ranges suggested by the corresponding independent measurement results and device specifications. The parameters yielding the best fit within these ranges were chosen for the realistic model presented on the figures. The mean deviation of the statistics produced by a Monte Carlo scan of the parameters within these ranges was used to determine the size of the errorbars. For the first step, the errorbars produced by the Monte Carlo simulation vanish due to a symmetry, leaving the aforementioned deviation of detection efficiencies as the only source of error.
How to cite this article: Elster, F. et al. Quantum walk coherences on a dynamical percolation graph. Sci. Rep. 5, 13495; doi: 10.1038/srep13495 (2015).
J.N. and I.J. received financial support from Grant No. RVO 68407700, A.G. and I.J. from No. GAČR 13-33906S, and A.G. from TÁMOP-4.2.4.A/2-11/1-2012-0001 “National Excellence Program” of Hungary.
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/