Serial femtosecond X-ray crystallography (SFX) using an X-ray free electron laser (XFEL) is a recent advancement in structural biology for solving crystal structures of challenging membrane proteins, including G-protein coupled receptors (GPCRs), which often only produce microcrystals. An XFEL delivers highly intense X-ray pulses of femtosecond duration short enough to enable the collection of single diffraction images before significant radiation damage to crystals sets in. Here we report the deposition of the XFEL data and provide further details on crystallization, XFEL data collection and analysis, structure determination, and the validation of the structural model. The rhodopsin-arrestin crystal structure solved with SFX represents the first near-atomic resolution structure of a GPCR-arrestin complex, provides structural insights into understanding of arrestin-mediated GPCR signaling, and demonstrates the great potential of this SFX-XFEL technology for accelerating crystal structure determination of challenging proteins and protein complexes.
Background and Summary
Serial femtosecond X-ray crystallography (SFX) is an innovative development for protein structure determination, which uses X-ray free electron lasers (XFELs) as a radiation source to elicit diffraction from crystals1. An XFEL beam delivers extremely intense X-ray laser pulses that allow high resolution diffraction data collection from crystals of micrometer to nanometer size in random orientations. XFEL pulses of shorter than fifty femtosecond duration diffract protein crystals and terminate before significant radiation damage occurs in the protein, thus enabling data collection with reduced radiation damage using a dose higher than tolerable for cryogenically cooled crystals2,3. SFX has a high potential for structure determination of challenging proteins such as GPCRs and other membrane proteins that often don’t form crystals of sufficient size for synchrotron data collection4. Thus, SFX represents an important advancement in protein crystallography.
GPCRs comprise a large family of membrane proteins that are involved in many key signal transduction pathways in human physiology, and are targeted by approximately 40% of all approved pharmaceutical drugs5,
In this paper, we report the deposition of the XFEL data for the recently published SFX structure determination of a rhodopsin-arrestin complex9 (Data Citation 1: RCSB Protein Data Bank 4ZWJ) as well as further details of crystallization, data collection, structure solution and validation. This rhodopsin-arrestin crystal structure is the first GPCR-arrestin complex structure that reveals the mechanism of GPCR recruitment of arrestin for desensitizing G protein signaling and initiating the arrestin-mediated signaling cascade.
Crystallization of rhodopsin-arrestin complex
Human rhodopsin and mouse visual arrestin-1 were used in our study. A T4 lysozyme (T4L)-rhodopsin-arrestin fusion protein was designed to form a stabilized rhodopsin-arrestin complex for crystallization with LCP technology. The fusion protein contains an N-terminal T4L (residues 1–162) and the full-length human rhodopsin (residues 1–348), which is followed by a 15-amino acid linker (AAAGSAGSAGSAGSA) and a mutant mouse visual arrestin (L374A, V375A, F376A, residues 10–392). This fused protein was expressed in HEK293S cells using a tetracycline-inducible expression vector with an N-terminal His8-MBP-MBP expression tag and a 3C protease cleavage site. The fusion protein was extracted from the cell membrane using an extraction buffer containing 0.5%(w/v) n-dodecyl-β-D-maltopyranoside (DDM, Anatrace) and 0.1% (w/v) cholesteryl hemisuccinate (CHS, Anatrace), and purified by amylose affinity chromatography. The protein sample was further purified using size exclusion chromatography and was concentrated to about 30 mg/ml for crystallization. All-trans-retinal at a molar ratio of 5 retinal:1 protein was added prior to crystallization.
LCP crystallization of T4L-rhodopsin-arrestin fusion protein was performed using the monoacylglycerol (MAG) monopalmitolein (9.7 MAG, Nu Chek) containing 10% (w/w) cholesterol as the host lipid. Monoolein (9.9 MAG, Nu Chek), the most widely used host lipid for GPCR crystal growth, was first used as the host lipid for crystallization of the fusion protein with different concentrations of PEG 400 in combination with the StockOption Salt kit (Hampton Research) at various pH levels, but did not support crystal growth of the T4L-rhodopsin-arrestin complex. We thus tested several alternative lipids including 6.9 MAG (Nu Chek), 7.9 MAG (Anatrace), 9.7 MAG, 8.7 MAG (Anatrace) and 10.7 MAG (Nu Chek). Of all the lipids tested, only 9.7 MAG reproducibly facilitated the crystallization of the T4L-rhodopsin-arrestin complex. Figure 1a shows the temperature-composition phase diagram for 9.7 MAG constructed based on small- and wide-angle X-ray scattering measurements made in the heating direction10,11. The maximum water-carrying capacity of 9.7 MAG is close to 50% (w/w) at room temperature, which is considerably greater than that of 9.9 MAG (~40% (w/w)). This indicates that the cubic mesophase formed by 9.7 MAG has bigger aqueous channels compared to that of 9.9 MAG to better accommodate the relatively large non-membrane domains (arrestin and T4L) of the fusion protein and to facilitate the diffusion and crystallization of the fusion protein in the mesophase (Fig. 1b).
For initial LCP crystallization, a well-established protocol was used to reconstitute the T4L-rhodopsin-arrestin fusion protein into the lipid bilayer of the cubic phase8. Briefly, protein solution of about 30 mg/ml was mixed with 9.7 MAG containing 10% (w/w) cholesterol at a 1:1 ratio by weight using a coupled syringe mixer10 until a viscous transparent protein-laden homogenous LCP was formed. The crystallization was set up using a Gryphon LCP robot (Art Robbins Instruments) or an NT-8 LCP robot (Formulatrix). A volume of 50 nl boluses of LCP were applied to each well of a 96-well glass sandwich plate (Molecular Dimensions or Marienfeld-Superior), covered with 0.8 μl crystallization solutions and sealed with a glass cover slide. The sandwich plates were kept at 20 °C, and multiple initial hits were identified after a few days from home-made crystallization screens, which were prepared using 30% (v/v) PEG 400 in combination with 100 or 400 mM salts from the StockOptions Salt kit and buffers of pH 5, 6, 7, and 8 (refs. 9, 12). The final optimized crystals with sizes of 5–20 μm were obtained from a precipitant containing 28% PEG 400, and 50 mM magnesium acetate, 50 mM sodium acetate at pH 5.0. These crystals were harvested directly from LCP using MiTeGen loops, frozen in liquid nitrogen and used for synchrotron data collection (Fig. 2a).
SFX data collection requires tens to hundreds μl of LCP filled with microcrystals at high density. We therefore used our previously developed protocols to scale-up crystallization set-up using 100 μl gas-tight Hamilton syringes4,13. Briefly, a volume of 5 μl protein-laden LCP, as used for crystallization in sandwich plates, was slowly injected as a continuous string into a 100 μl syringe filled with 60 μl of crystallization solution10. High density microcrystals grew in the mesophase in the syringes over 12 to 24 h at 20 °C. The best crystals were obtained from the crystallization condition of 32%(v/v) PEG 400, and 150 mM ammonium phosphate at pH 6.4. The crystal sizes were at about 5–10 μm measured using a polarized light microscope (Fig. 2b). The LCP with crystals was consolidated from several syringes and transferred into the LCP injector14 for XFEL diffraction data collection.
Synchrotron diffraction data collection and processing
Data sets to about 8.0 Å resolution were collected from multiple crystals (5–10 crystals) using the 21-ID-D beam line of LS-CAT with a Mar 300 CCD detector or 23-ID-D beam line of GM/CA-CAT with a Pilatus 6 M detector at the Advanced Photon Source (APS), Argonne National Laboratory at Argonne, IL (Fig. 3a). An additional data set to 7.7 Å was collected from a single crystal of about 20 μm size using a 10 μm beam of 1.033 Å wavelength and 0.1 s exposure time per 0.1° oscillation with a Pilatus 6 M pixel detector at a distance of 600 mm at the X10SA beam line of the Swiss Light Source. The diffraction data were reduced, integrated and scaled with XDS15. The data statistics are shown in Table 1. While the 7.7 Å data set from a single crystal was used for twinning analysis and the validation of the structure model from SFX data, all other synchrotron data sets were not used for structure determination of the T4L-rhodopsin-arrestin complex because of their lower resolution.
X-ray free electron laser data collection
The SFX experiments were performed using the LCLS Coherent X-ray Imaging (CXI) instrument at the SLAC National Accelerator Laboratory (Menlo Park, California, USA). Rhodopsin-arrestin complex crystals of 5–15 μm in LCP were streamed across the XFEL beam in a continuous mesophase column at a flow rate of 0.18 μl/min using an LCP injector14 with a 50 μm diameter nozzle. X-ray pulses of 48 fs duration and 9.5 keV photon energy (1.3 Å wavelength) were focused to a spot of ~1 μm FWHM using Kirkpatrick-Baez mirrors and centered on the LCP column using an inline microscope. A transmission of 3–10% was used and an average flux of 3×1010 photons per pulse was delivered to single crystals in the LCP column with an estimated maximum dose of about 25 MGy per crystal. Crystals in the LCP stream were randomly oriented in the interaction region, producing a crystal diffraction pattern whenever the regular 120 Hz X-ray pulse repetition rate happened to coincide with a crystal being in the focal region. Diffraction patterns were read out and recorded with a Cornell-SLAC pixel array detector (CSPAD)16 at a sample-to-detector distance of 100 mm after each X-ray pulse (Fig. 3b and Data Citation 2: Coherent X-ray Imaging Data Bank http://dx.doi.org/10.11577/1241101). Approximately 100 μl of crystal-laden mesophase was used for data collection.
Three slightly different preparations of rhodopsin-arrestin complex were used: batches 1, 2, and 3, these were noted internally as Rho-Arr-ATR, Rho-Arr(C234)-ATR, and Rho-Arr(C235)-ATR-IP6, corresponding to runs 2–50, 52–64 and 69–73, respectively of experiment LE79 at the CXI instrument at LCLS in November 2014 (Data Citation 3: RCSB Protein Data Bank 5DGY). Even though all three batches were expected to be isomorphous, we found during data processing that merging data from batches 1+2 (runs 2–64) produced superior statistics and electron density than merging all three batches (runs 2–73) (Data Citation 2: Coherent X-ray Imaging Data Bank http://dx.doi.org/10.11577/1241101), despite the smaller number of crystals included in the data set consisting of only batches 1+2 compared to all data. We speculate that this is due to slight non-isomorphism between the different individual preparation conditions. All data has been deposited with the CXIDB (see the section of ‘Data records’, and Data Citation 2: Coherent X-ray Imaging Data Bank http://dx.doi.org/10.11577/1241101) even though only data from batches 1+2 were used for the published structure.
XFEL data processing
About 5 million data frames were recorded in a 10-hour data acquisition period using crystal sample batch 1+2. The initial data were reduced and analyzed using the program Cheetah17. Of the recorded frames, 22,262 images were identified containing potential crystal hits with more than 40 Bragg peaks of greater than one pixel in size and a signal-to-noise ratio better than 6 after local background subtraction. This represented a hit rate of about 0.45% (Fig. 3b).
Data has been deposited with the CXIDB as both processed hits and raw data. Hits found by Cheetah are saved in Cheetah's single-frame HDF5 format with the minimum number of corrections necessary to make the data useable: specifically, detector dark correction and common mode correction using unbonded pixels on the cspad detector, with saturated and bad pixels flagged in a separate mask saved along with the data (saveDetectorCorrected option). We have additionally deposited the raw data for the whole experiment in the CXIDB enabling the detector correction and hit finding steps to be repeated if desired. This raw data is deposited in HDF5 format created using LCLS HDF5 file translation in which raw data is saved using the layout documented in the LCLS online documentation, enabling processing without the need to install LCLS-specific XTC file readers. A run table is included to aid analysis of the raw data.
Data frames with crystal hits were extracted in HDF5 format for further analysis with the program package CrystFEL18. These potential crystal hits prior to indexing have been deposited with the CXIDB (CXIDB ID 32, Data Citation 2: Coherent X-ray Imaging Data Bank http://dx.doi.org/10.11577/1241101) and are the subject of this Data Descriptor. Of the potential crystal hits, 18,874 diffraction patterns were identified and indexed using the program ‘indexamajig’ in the CrystFEL package with a combination of indexing methods of MOSFLM19, XDS15 and DirAx20. Reflections were integrated over the three-dimensional reflection profile using ‘process-hkl’ by which the final integrated Bragg intensities were constructed with partially recorded intensities from single shot diffraction patterns of randomly oriented single crystals. An integration region radius of two pixels was used to avoid overlaps with neighboring peaks due to the high spot density resulted from the large unit cell dimensions. All merged intensities can be visualized by plotting as a precession-style image along the  and  axes of the reciprocal space (Fig. 4a,b). The crystals appeared to be tetragonal or very close to tetragonal, with an apparent reflection condition of l=4n (n is an integer) for the 00 l reflections and a unit cell of a=b=109.2 Å, c=452.6 Å, and α=β=γ=90°. The diffraction strength was anisotropic and the data was truncated using the CrystFEL program ‘get_hkl’ to 3.3 Å along the c* axis and 3.8 Å along the a* and b* axes based on the correlation coefficient statistics (CC*) of the data21 (Table 1). This anisotropy in resolution can be seen in the zone axis sections (Fig. 4a,b).
For certain merohedral space groups, an indexing ambiguity arises which results in a ‘computationally twinned’ dataset when data from many crystals are merged together in serial crystallography17. An L-test22 performed using Phenix.xtriage23 showed a mean |L| of 0.399, a mean L2 of 0.191 that suggested the presence of perfect twinning in our XFEL data (Fig. 5a). Several attempts using recently reported methods24,25 to resolve the indexing ambiguity failed, indicating that the crystals were probably physically twinned. To confirm that the perfect twinning of the data was due to the physically twinned crystals, an L-test of the synchrotron data collected from a single crystal was carried out. The L-test revealed the mean |L| and the mean L2 of the synchrotron data were 0.342 and 0.169, respectively, and the same twin law as the XFEL data (Fig. 5b), confirming that the perfect twinning of our XFEL data was indeed due to the twinned crystals, which could be either in a tetragonal space group and merohedrally twinned, or in an orthorhombic space group and pseudo-merohedrally twinned because of their nearly identical unit cell axes of a and b and non-crystallographic rotational symmetry26,27. The exact space group was later determined by Zanuda28.
For structure determination, molecular replacement (MR) was performed using available structural models of G protein peptide-bound rhodopsin (PDB code 4A4M29), the pre-activated arrestin (PDB 4J2Q5) and T4 lysozyme (PDB 3SN6 (ref. 30)), and the diffraction data that was expanded to Laue group 4/m. MR searches were carried out in all possible space groups of the tetragonal system using the program Phaser31. Four copies of either rhodopsin or arrestin and three copies of T4L were found in space group P43 with Z scores greater than 8 for each solution. There is a pseudo-translational symmetry by ~1/2a and 1/2b, and a pseudo-rotational symmetry nearly parallel to the twin operation (k, h, −l) of the molecules in the asymmetric units (Fig. 6a,b).
Because of the perfect twinning and the presence of pseudo-symmetry elements, the apparent space group of a crystal may not be its true space group. We therefore analyzed the data with the structural model obtained from space group P43 using Zanuda28 (Table 2), and found that the space group of P212121 gave the best Z score and free R values, and was more likely the true space group for this data set. The data was then expanded to the Laue group of mmm and MR solutions were found in space group P212121 with better statistics (Table 2). Those results indicated that the true space group of the crystals was P212121, and the crystals appeared to be in space group P43 due to the pseudo-merohedral twinning, caused by the very close a and b axes of the lattice and the non-crystallographic rotational symmetry that corresponds to the twin operator k,h,−l. This physical twinning, which corresponds to the same transformation as the only possible indexing ambiguity for these unit cell parameters and space group assignment, explains why our attempts to resolve the indexing ambiguity did not succeed.
The structural model from MR was initially rebuilt and refined against the XFEL data without the twin law using COOT32 and Phenix23. Composite omit maps calculated using a Phenix program were used to guide manual building of the loop regions missing in the original models, and to rebuild misplaced residues. After many iterated cycles of model building and refinement, the Rfree reduced, but could not be further improved beyond 36%, which suggested a point to apply twin law for further refinement. Further fine-tuning refinement was done using the methods of individual position, group B-factor and TLS with NCS restraints and twin law. The final Rwork was 25.2% and the Rfree was 29.3%, which demonstrated that the model was correctly built and refined (Table 3). The final model included four copies of rhodopsin-arrestin complex, two copies of full T4 lysozyme in complex A and D, respectively, and a partial T4 lysozyme molecule (residues 2–12 and 58–161) in complex C. The rhodopsin ligand all-trans retinal was not built in the model because of weak density.
The structural model from SFX was extensively validated using various independent biochemical and biophysical methods, including electron microscopy, double electron-electron resonance spectroscopy, hydrogen-deuterium exchange mass spectrometry, cell-based rhodopsin-arrestin interaction assays, and site-specific disulfide cross-linking experiments as reported in the original paper9. Here we focus on the crystallographic validation of the structure. A composite omit map calculated using a Phenix23 program with simulated-annealing at 3,000 K showed a density of good quality which suggested that the model was correctly built (Fig. 7). Real space correlation coefficients against a 2mFo-DFc map for each chain of the model calculated using the EDSTATS program in CCP4 (ref. 33) indicated an overall good fit between the structural model and the electron density map (Fig. 8a–d). To further validate the structural model from SFX, we placed the model in the asymmetric unit of the synchrotron data and performed rigid body and group B-factor refinement with twin law and NCS restraints. The refined model with good R factors (Rwork=28.5%, Rfree=33.5%, Table 3 and Data Citation 3: RCSB Protein Data Bank 5DGY) against the synchrotron data could be superposed on the XFEL model with only slight difference (Fig. 9), which confirmed that the XFEL data was as reliable as a synchrotron data set for crystal structure determination. The MolProbity analysis revealed an all-atom clash score of 1.47, 0.59% rotamer outliers, 100% favorable and allowed Ramachandran regions, and an overall MolProbity score of 1.13, corresponding to a better than average model quality compared to those of similar resolution from the PDB database. The structure was also analyzed using POLYGON in Phenix23, which indicated that the quality of the model statistics was above average compared with 535 entries of similar resolution in the PDB (Fig. 10).
The technology of serial femtosecond X-ray crystallography using X-ray free electron lasers has been developed and validated by several pioneer groups1,4,34,35. The crystal structure of the rhodopsin-arrestin complex determined using the XFEL dataset was extensively validated through multidisciplinary technologies including HDX, DEER and disulfide crosslinking as described in the original paper9. The XFEL data was also validated by crystallographic analysis as described in the section of Structure Validation. These validations support the technical quality of the XFEL dataset to be used for 3-dimentional structure determination.
In summary, obtaining the crystal structure of the rhodopsin complex faced many challenges ranging from protein engineering to formation of a stable protein complex, from crystallization to data collection and processing, and from structure determination to validation by multiple inter-disciplinary techniques. The structure determination of the rhodopsin-arrestin complex using XFEL data provides an important example that demonstrates the great potential of this technology for solving crystal structures of challenging proteins that do not grow crystals of sufficient size for crystallographic studies using conventional X-ray sources.
How to cite this article: Zhou, X. E. et al. X-ray laser diffraction for structure determination of the rhodopsin-arrestin complex. Sci. Data 3:160021 doi: 10.1038/sdata.2016.21 (2016).
Zhou, X. E. RCSB Protein Data Bank 5DGY (2015)
Portions of this research were carried out at the Linac Coherent Light Source (LCLS) at the SLAC National Accelerator Laboratory. LCLS is an Office of Science User Facility operated for the U.S. Department of Energy Office of Science by Stanford University. We thank staff members of the Life Science Collaborative Access Team (ID-21) of the Advanced Photon Source (APS) for assistance in data collection at the beam lines of sector 21, which is in part funded by the Michigan Economic Development Corporation and the Michigan Technology Tri-Corridor (Grant 085P1000817), and the General Medicine Collaborative Access Team for assistance in data collection at the beam lines of sector 23 (ID-23), funded in part with Federal funds from the National Cancer Institute (ACB-12002) and the National Institute of General Medical Sciences (AGM-12006). Use of APS was supported by the Office of Science of the US Department of Energy, under Contract No. DE-AC02-06CH11357. This work was supported in part by the Jay and Betty Van Andel Foundation, Ministry of Science and Technology (China) grants 2012ZX09301001 and 2012CB910403, 2013CB910600, XDB08020303, 2013ZX09507001, Amway (China), National Institute of Health grants, DK071662 (H.E.X.); GM102545 and GM104212 (K.M.); the National Institutes of Health Common Fund in Structural Biology grants P50 GM073197 (V.C. and R.C.S.), P50 GM073210 (M.C.), and R01 GM095583 (P.F.); National Institute of General Medical Sciences PSI: Biology grants U54 GM094618 (V.C. and R.C.S.), R01 GM108635 (V.C.), U54 GM094599 (P.F.), GM097463 (J.S.), and U54 GM094586 (JCSG); NSF Science and Technology Center award 1231306 (J.C.H.S., P.F. and U.W); and Science Foundation Ireland, grant 12/IA/1255 (M.C.). Parts of this work were also supported by the Helmholtz Gemeinschaft, the DFG Cluster of Excellence Center for Ultrafast Imaging, and the BMBF project FKZ 05K12CH1 (H.N.C., A.B., O.Y., T.W.). The contributions of E. Boyle-Roden to the 9.7 MAG phase diagram work is gratefully acknowledged. We thank Dr Filipe Maia for his assistance in deposition of the XFEL data to CXIBD.
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0 Metadata associated with this Data Descriptor is available at http://www.nature.com/sdata/ and is released under the CC0 waiver to maximize reuse.