Reef-building corals depend on an intracellular symbiosis with photosynthetic dinoflagellates for their survival in nutrient-poor oceans. Symbionts are phagocytosed by coral larvae from the environment and transfer essential nutrients to their hosts. Aiptasia, a small tropical marine sea anemone, is emerging as a tractable model system for coral symbiosis; however, to date functional tools and genetic transformation are lacking. Here we have established an efficient workflow to collect Aiptasia eggs for in vitro fertilization and microinjection as the basis for experimental manipulations in the developing embryo and larvae. We demonstrate that protein, mRNA, and DNA can successfully be injected into live Aiptasia zygotes to label actin with recombinant Lifeact-eGFP protein; to label nuclei and cell membranes with NLS-eGFP and farnesylated mCherry translated from injected mRNA; and to transiently drive transgene expression from an Aiptasia-specific promoter, respectively, in embryos and larvae. These proof-of-concept approaches pave the way for future functional studies of development and symbiosis establishment in Aiptasia, a powerful model to unravel the molecular mechanisms underlying intracellular coral-algal symbiosis.
A complex yet fundamental puzzle in cell and developmental biology is how cells from different phyla coexist and co-function in symbiosis – how do very different cells encounter each other, what molecular conversations occur to promote symbiosis establishment, and how is such a complex partnership maintained in the steady state? An ecologically crucial symbiosis is that between reef-building corals and their single-celled dinoflagellate algae symbionts, which provide photosynthetically derived nutrients underlying the productivity and health of coral reef ecosystems1,2. Strikingly, most corals must re-establish this vital symbiosis anew every generation in the larval or juvenile stage by taking up algal cells from the environment into the gastric cavity, after which they are phagocytosed into endodermal cells and reside as endosymbionts inside a specialized organelle, the symbiosome3,4,5,6. Despite its importance, we know little regarding the molecular basis of the establishment of coral-algal symbiosis during development.
Progress towards a better understanding of symbiosis establishment has been slow, primarily due to the historical lack of tools and workable laboratory systems: reef-building corals grow slowly, are sensitive to environmental conditions, and typically sexually reproduce to spawn larvae only once annually7,8,9. Likewise, most other current cnidarian laboratory models such as Hydra, Nematostella, Clytia, and Hydractinia are not symbiotic (the exception, Hydra viridissima, hosts symbionts unrelated to those in corals and lacks a free-swimming larval stage). The advent of modern molecular tools has made establishing new model systems far more feasible, and we and our colleagues have developed the small marine anemone Aiptasia into a powerful model for molecular studies of coral-algal symbiosis10,11. Housing the same symbionts as corals yet tractable in the laboratory, Aiptasia now has a range of key resources including a sequenced genome, transcriptomes (e.g. symbiotic vs. non-symbiotic), advanced microscopy, phenotypic assays, and controlled sexual reproduction in the laboratory12,13,14,15,16,17. Just as in corals, Aiptasia larvae phagocytose symbionts from the environment18,19.
Despite its success, Aiptasia has so far lacked certain tools important for a cell and developmental model system: namely, the introduction of exogenous material or the perturbation of endogenous processes. Such ability would be especially useful to study how Aiptasia, and by extension reef-building corals, establish symbiosis anew in the developing larval stage. To this end, microinjection of material into embryos has proven an efficient method of genetic engineering in many models, while also making possible the direct production of F0 manipulated larvae and juveniles for immediate phenotypic analysis.
There are currently no published reports of microinjection in Aiptasia nor any symbiotic cnidarian, with one exception of an elegant study involving the injection of morpholinos into recently spawned coral embryos20. While an important step forward, the aforementioned difficulties of efficient laboratory work in corals means that a more fruitful long-term approach would be developing these techniques in the Aiptasia model. We have excellent guides not only from that study but also from work in the cnidarian models Hydra, Nematostella, Clytia, and Hydractinia, in all of which successful microinjection and genetic engineering protocols are employed21,22,23,24,25,26,27,28.
The development of microinjection and the subsequent introduction of foreign material would be ground-breaking for the Aiptasia and coral-algal symbiosis fields. It would open the door to myriad observational and functional studies, propelling the symbiosis field forward and allowing both broad approaches as well as specific hypothesis testing based on candidate genes. To this end, here we show the establishment of microinjection in the Aiptasia model system in a simple and robust workflow to introduce exogenous material into embryos for subsequent analysis. We describe conditions for regular gamete production as a prerequisite to efficient microinjection. We then show successful introduction of three key materials: fluorescent protein, mRNA, and DNA plasmids, with visualization of the fluorescent products in both fixed and live samples. Importantly, introduction of such exogenous material appears to have no significant effects on either development or symbiosis establishment, demonstrating the utility of these tools to study fundamental questions of development and symbiosis establishment in the Aiptasia system.
Optimized spawning system and in vitro fertilization for zygote production
An important prerequisite for zygote microinjection is control over fertilization, which allows regular access to developmentally synchronized stages. We previously established a robust, consistent protocol for laboratory induction of Aiptasia spawning based on a blue light cue (simulated full moon)16. Building on this, we optimized a controlled anemone cultivation system to induce spawning in female and male anemones separately for gamete collection and in vitro fertilization. Staged sets of sex-segregated mature adults were induced to spawn for two consecutive months (two lunar simulations), with spawning typically three to four weeks after the start of each cue (Fig. S1A). For researchers wishing to carry out microinjection experiments on a regular basis, it is desirable to have the opportunity to inject multiple times throughout the week. We found that gametes were produced on average 2.7 times per week (n = 24 weeks), and the last three days of the working week, gametes were available for experimentation the majority of weeks (Fig. 1A). After spawning, eggs were often in a discrete patch near the female (Fig. 1B). Sperm was sometimes seen as an obvious expelled cloud or as milky water, although often it was too dilute to directly observe (data not shown).
We next assessed the efficiency of in vitro fertilization (IVF) of mixed spawned gametes. Several hundred eggs were gently transferred into a small plastic petri dish followed by addition of sperm-containing water. Fertilization efficiency was quantified after approximately 4–5 h, when developing zygotes could be clearly distinguished from unfertilized eggs. We found that on average, only 20% of eggs were fertilized in uncoated petri dishes (Fig. 1C). However, using dishes that were pre-coated with 0.1% gelatin in distilled water yielded mean fertilization rates of 87% (Fig. 1C), and this treatment was used in all further experiments. We then quantified IVF efficiency over a timecourse after spawning. On average, while more than 90% of eggs were fertilized when sperm was added within 15 min after egg release, fertilization rates fell rapidly over time, reaching 20% when sperm was added to eggs 60 min post-spawning and nearly 0% after 120 min (Fig. 1D). Thus, time is of the essence to ensure high fertilization rates.
Establishment of an efficient Aiptasia zygote microinjection procedure
After undergoing IVF in coated dishes, zygotes were gently transferred to a dish with a strip of nylon mesh (80 × 80 μm) as a substrate to immobilize them for injection (Fig. S1B). With a mean diameter of 86 μm17, Aiptasia zygotes settle well into the mesh (Fig. 1E). Using a stereomicroscope set-up (Fig. S1C), material was injected to approximately a third to half of the cell diameter, corresponding to approximately 10% of the egg volume as assessed visually by the tracer dye or fluorescent protein. This fluorescence was then used to distinguish injected from non-injected zygotes (Fig. 1F). In Aiptasia zygotes, the first clear indication of development is the appearance of 4-cell stages approximately 90 min post-fertilization. Shortly before this, zygotes appear box-shaped (Fig. S1D), at which point we stop injecting; this ensures that material is delivered to cells prior to the first cleavage. Occassionally, we observed two discrete nuclei before the first obvious cleavage, likely indicating that the first nuclear division happens without cytokinesis. The next cleavage occurs approximately 20 min after the first, and embryonic development continues until the blastula stage approximately 5 h post-fertilization (hpf), at which point successfully developing embryos are easily distinguished from unfertilized eggs (arrowhead, Fig. S1E). With practice, one can inject more than 100 zygotes in the roughly 1 h window before cleavage begins.
We quantified the survival rates after 24 h of injected embryos versus those handled identically but not injected. Embryos injected with either protein or mRNA (see below) had a survival rate of approximately 49% (332 of 677 injected embryos). Among these, those injected with protein had a lower survival rate (42%, n = 150 injected) than those injected with mRNA (51%, n = 527 injected), but this difference was not significant (Student’s 1-tailed heteroscedastic t-test, p-value = 0.15). In comparison, the survival rate of control embryos was approximately 61% (306 of 501 control embryos), higher than but not significantly different from the injected set (Student’s 1-tailed heteroscedastic t-test, p-value = 0.13).
Microinjection of fluorescent protein into Aiptasia zygotes
To visualize cell outlines in the developing larvae, we recombinantly expressed and purified Lifeact-eGFP protein (Fig. S2), which in other systems labels the actin cytoskeleton and has little to no effect on live actin cellular dynamics29,30. Microinjected protein instantly and ubiquitously labeled cell outlines in Aiptasia zygotes from the first cell divisions to 24 hours post-fertilization (hpf), especially in the ectoderm (Fig. 2A). Prominent but weaker staining was visible 48 hpf, but staining intensity decreased with larval age and was nearly undetectable 4 days post-fertilization (dpf). Development of the injected larvae appeared to proceed in accordance with our previous observations of Aiptasia embryogenesis17, producing larvae with two clearly-defined tissue layers by 24 hpf and apparently normal overall morphology (Fig. 2) and locomotion.
Microinjection and in vivo translation of exogenous mRNA in Aiptasia zygotes
To visualize cell outlines on a longer timescale, as well as to test whether exogenous mRNA is efficiently translated in Aiptasia zygotes, we next injected in vitro transcribed bicistronic mRNA from a plasmid encoding eGFP with a nuclear localization signal (NLS-eGFP) and mCherry with a farnesylation signal (mCherry-CaaX) separated by the self-cleaving V2A peptide (Fig. 2B). This was previously shown to simultaneously label cell membranes and nuclei in developing embryos of the anemone Nematostella27. Injected mRNA was translated robustly as indicated by strong, homogeneous, and long-lasting fluorescent labeling of the cellular structures (Fig. 2C). Labeled membranes and nuclei were detected as early as 4 hpf. At 6 hpf (blastula stage), signal intensity had further increased and remained strong for 1–2 dpf, with signal still visible at 4 dpf (Fig. 2C).
Symbiosis establishment and live imaging of mRNA-injected larvae
Importantly for the applicability of this technique to the study of symbiosis, mRNA injection did not substantially affect symbiont uptake by Aiptasia larvae. Using our standard assay17, we exposed injected and control larvae to a compatible symbiont strain and analyzed symbiosis establishment. Injected larvae appeared developmentally normal and took up symbionts from the environment; imaging by confocal microscopy showed phagocytosed algae within the host endoderm that could be clearly distinguished from those in the gastric cavity (Fig. 3A). In four experiments, each with matched injected and control larvae, infection efficiencies did not differ significantly between mRNA-injected larvae (47%) and non-injected controls (66%) (Student’s 2-tailed unpaired t-test, p-value = 0.14) (Fig. 3B). Likewise, the average number of algal cells that each infected larva contained was similar (3.8 per injected larva vs. 3.7 per control larva; Student’s 2-tailed unpaired t-test, p-value = 0.37) (Fig. 3C). Excitingly, we observed mCherry-labeling of symbiosome membranes surrounding internalized algae; this was apparent even in cases where the larger host cell membrane labeling was difficult to distinguish (Fig. 3D). The intensity of symbiosome labeling and algal red autofluorescence varied between symbionts (Fig. S3A).
In order to observe symbionts in living hosts, we immobilized larvae injected with NLS-eGFP-V2A-mCherry-CaaX by embedding them in agarose; this prevented larvae from swimming, but their rotation caused by ciliary beating continued (Movie S1). Using this technique, nuclei, cell membranes, and the symbiosome could be imaged live (Fig. 3E), at a rate of 1 frame per 2.5 sec (Movie S2), which would allow cellular events to be followed in real time. Embedded larvae survived and could be imaged for several hours (Fig. S3B).
Microinjection of DNA into Aiptasia zygotes
With the goal of achieving gene expression from exogenous DNA and ultimately establishing stable transgenesis, we generated plasmids in which the NLS-eGFP-2A-mCherry-CaaX reporter was driven by the promoter of different actin genes cloned from Aiptasia (Fig. 4A,B). In each case, the cassette was flanked by recognition sites for the meganuclease I-SceI (Fig. 4A); co-injection of I-SceI with plasmids containing these sites strongly increased genomic integration in other species, e.g. medaka and Nematostella31,32. We identified six actin genes from the Aiptasia genome15, and used larvae transcriptome data19 to select the four highest expressed to clone and use for injection (Fig. 4B). The percentage of larvae displaying reporter expression at 10 hpf was determined, and was clearly the highest for one promoter (accession # XM_021049442.1, 63%, n = 97 larvae, Fig. 4B). Reporter expression was mosaic in these larvae, with cell patches of varying sizes displaying GFP-labeled nuclei and mCherry-labeled membranes (Fig. 4C). The three other Aiptasia promoters tested (Fig. 4B) yielded low proportions of larvae with individual fluorescent cells rather than whole fluorescent patches. For larvae expressing reporters driven by the XM_021049442.1 promoter, we did not determine whether the transgene was stably integrated into the genome, but the successful in vivo expression allows future work to establish Aiptasia transgenesis.
Here we establish a workflow to successfully introduce exogenous protein, mRNA, and DNA via microinjection into Aiptasia zygotes and, critically, we demonstrate that such manipulation has no significant effects on development or symbiosis establishment in Aiptasia larvae. This progress propels the Aiptasia model system forward in answering fundamental questions regarding development and concurrent establishment of coral-algal symbiosis. While immediately permitting a range of observational and functional assays, it also opens the door to CRISPR-Cas9-induced gene editing and the production of stable transgenic lines. Finally, this work holds broader implications for comparative developmental biology and emerging technologies in the current bloom of new model systems across the life sciences.
This workflow immediately permits in the Aiptasia larval system many observational and functional assays that bring us closer to understanding larval development and symbiosis establishment. The small transparent larvae of Aiptasia are amenable to microscopy, which was until now used to assay fixed specimens17,18. Thus, the investigation of development and the symbiosis establishment process was necessarily limited to “snapshots”; now, live imaging permits observation of development and symbiosis dynamics in real time, with injected genetic material or even commercially available dyes to label conserved cellular structures.
To study developmental processes, larvae with labeled cell outlines (Figs 3 and 4) and live imaging can be used to characterize, for example, gastrulation, tissue differentiation, and cell division and migration. Injected recombinant Lifeact-eGFP protein instantly labels all cells in developing zygotes, allowing studies of very early embryonic development. Similarly, injection of NLS-eGFP-V2A-mCherry-CaaX mRNA allows monitoring of cellular dynamics once translation has started. Early and homogenous expression of exogenous mRNA also allows the manipulation of developmental genes, such as those involved in patterning and axis establishment, to monitor dynamics or create overexpression phenotypes.
To study symbiosis establishment in Aiptasia larvae, key goals are to test candidates for their roles in symbiosis as well as to observe symbiont phagocytosis and proliferation. Importantly, we can immediately tackle the first goal by using injected mRNA. For instance, we can now express proteins fused to fluorescent tags to track their co-localization with symbionts or other proteins, or analyze the effects of the over-expression phenotypes of symbiosis-specific genes on symbiosis establishment. The constructs reported here have proven limited for observing symbiont phagocytosis and proliferation with cellular resolution; both the directly injected Lifeact-eGFP protein and expressed farnesylated mCherry mRNA lose resolution in the endoderms of older larvae (Figs 3 and 4). This phenomenon was also reported in Nematostella, where signal from some mRNA lasts for two months after injection yet others are rapidly lost33. There is however overlap between signal and symbiosis, as Aiptasia larvae acquire symbionts at and after 2 dpf, and signal of the mRNA fades several days later. Furthermore, the unexpectedly strong labeling of symbiosome membranes by farnesylated mCherry, even in older larvae, is a great advantage to studies of intracellular symbiosis dynamics.
We have made progress towards the goal of generating stable transgenic lines by demonstrating expression of an injected DNA construct with a fluorescent reporter driven by an Aiptasia endogenous actin promoter. To date we have only achieved transient and mosaic expression. The patches of expressing cells possibly represent clonal lineages deriving from a single mother cell in which the construct integrated into the genome. Nevertheless, this is a key first step for future transgenesis attempts. Currently, a drawback in the Aiptasia system is that metamorphosis and settlement of larvae into adults cannot yet be accomplished in the laboratory; multiple groups are actively working towards identifying the cue to induce closure of the life cycle. Nevertheless, the identification of a functional Aiptasia promoter may encourage testing alternative approaches to generating stable transgenic lines. For example, constructs could be delivered via gene bombardment34 or electroporation35,36 to Aiptasia adults, which rapidly reproduce asexually and have a high regenerative capability. Dissection of mosaic adults and subsequent regeneration would create lines with germline transgene transmission.
The Aiptasia field, and by extension the coral-algal symbiosis field, acutely requires tools to translate knowledge on molecular players into a mechanistic understanding at the functional level. In addition to the gain-of-function possibilities outlined above, the ability to deliver materials by microinjection facilitates the next major leap forward for the Aiptasia model: gene editing by CRISPR-Cas9. Such gene editing would allow, for the first time, knock-out of candidate genes implicated in symbiosis establishment to unequivocally and functionally demonstrate their role in symbiosis.
It is apparent that when developing a new model, not all techniques can be established at once. While some techniques must await, for example, the closure of the Aiptasia life cycle, other techniques can be employed immediately for urgent questions. Here we show that Aiptasia zygotes can be injected in sufficient numbers and the larvae used for symbiosis studies in the F0 generation.
Beyond the Aiptasia system, this work holds broader implications for comparative developmental biology and other emerging model systems. The studies of embryonic development in Aiptasia discussed above would complement those in other systems to dissect the evolution of fundamental developmental processes, such as gastrulation. As the sister group to bilaterians, cnidarians are important “evo-devo” models to infer evolutionary conservation and divergence of development (reviewed in26). The advent of modern research tools has led to rapid advances in emerging models, as new avenues are opened to study previously intractable cell biological questions11,37. The Aiptasia system is currently undergoing this transition: a wealth of resources has been recently and rapidly built, but missing was the transformative power of manipulation via introduction of exogenous material or targeted functional analysis. Our progress on this front was inspired by successful techniques in other model systems, and we hope this work in turn provides helpful “lessons learned” for other emerging models. With the rapid development of myriad new model systems, we are in the midst of an exciting time for major discoveries in underexplored cell biological phenomena.
Material and Methods
Breeding animals were produced asexually by pedal laceration from adult animals in master stock tanks of either male (CC712) or female (F00316) clonal lines. To raise them to sexual maturity, 12–14 animals of each line with an oral disc diameter of 4–5 mm for F003 and 5–6 mm for CC7 were maintained for 6–7 months as previously described16, in covered plastic tanks in approximately 1.6 l artificial sea water (ASW). Briefly, animals were kept at 26 °C with a 12 L:12D photoperiod from 8 am to 8 pm and fed five times a week with fresh Artemia nauplii. Three times per week, the surfaces of the tanks were cleaned with cotton swabs and ASW was exchanged. During this period, anemones of both lines grew to an oral disc diameter of 11–12 mm.
To prepare sexually-segregated tanks of Aiptasia, 3–5 mature animals of either CC7 or F003 were transferred into 300 ml ASW in a smaller tank one week before spawning induction to allow acclimatization, and fed and cleaned as described. Animals were kept at 29 °C in incubators with white LED illumination of 23–30 µmol m−2 s−1 on a 12 L:12D photoperiod, with darkness from 4 pm to 4 am, to allow gamete collection during working hours. Spawning was induced by exposing animals to blue LED illumination at 15–20 µmol m−2 s−1 for the entire dark phase on days 1 to 5 of a 28-day cycle to simulate the full moon16. Each set of tanks was kept for two simulated lunar cycles, and a new set established each week. Tanks were examined for gamete production using a stereoscope Monday through Friday from days 13 to 24 of each cycle. Spawning was checked from 9am – 10am, 5–6 h after the onset of darkness.
In vitro fertilization (IVF)
IVF was carried out in dishes coated with gelatin to prevent sticking of the gametes to uncoated plastic. Dishes were filled with a 0.1% solution of gelatin in distilled water, left at room temperature (RT) for 5 min, emptied, and then air-dried at RT overnight and stored at RT until further use.
Eggs from female tanks were transferred gently with a plastic transfer pipette into a coated dish in a volume of 5–10 ml. Eggs usually form dense patches, but occasionally float freely; attempts to concentrate these using 40 µm filters substantially reduced the number of normally developing embryos. We therefore used only spawning events that resulted in egg patches for microinjection. To fertilize the eggs, a total of 3–7 ml water from several induced male tanks was added to the dish to maximize the chances of sperm presence, and as soon as possible after gamete release because fertilization success declines with time. Eggs and sperm were incubated at RT for approximately 10 min to allow fertilization to occur while completing other preparations for microinjection.
Recombinant expression of Lifeact-eGFP protein
Lifeact-eGFP with a C-terminal 6His-tag was PCR amplified from the plasmid described by Riedl and colleagues29, cloned into the pET21a vector using classical restriction-based cloning methods, and transformed into E.coli strain BL21 for expression. A single colony was grown in LB medium to an OD600 of 0.6, at which time protein expression was induced by adding IPTG to a final concentration of 1 mM. Bacteria were lysed and the recombinant protein purified by classical immobilized metal affinity chromatography using Ni-NTA agarose beads (# 31105, Cube Biotech, Germany), and eluted with a buffer of 50 mM NaPO4 pH 8.0, 150 mM NaCl, 250 mM imidazole, and 5% glycerol. Collected protein fractions were analyzed using SDS-PAGE. Fractions with the highest protein content were pooled and dialyzed against 1x PBS. Protein concentration was determined via Bradford assay and absorbance measurements at A280 using a Nanodrop 1000 (Thermo Scientific). Protein aliquots were flash-frozen in liquid nitrogen and stored at −80 °C until further use.
Synthesis of mRNA for microinjection
The NLS-eGFP-V2A-mCherry-CaaX construct was transcribed from the pSYC-97 vector, a kind gift from Aissam Ikmi27,38. mRNA was synthesized using the mMESSAGE mMachine SP6 kit (Thermo Fisher Scientific) and purified with the RNeasy Mini Kit (Qiagen), according to the instructions in both kits. The quality and concentration of the mRNA was assessed on a 1% agarose gel and with a Nanodrop 1000. mRNA was diluted to 600 ng/µl with RNase-free water and aliquots stored at −80 °C until use.
Cloning of plasmids for microinjection
The plasmids used in this study were derived from that reported by Renfer and colleagues23. The mCherry CDS in the original plasmid was replaced through classical restriction-enzyme cloning with the NLS-EGFP-V2A-mCherry-CAAX-SV40 reporter cassette amplified from the pSYC-97 vector38. The four most highly-expressed actin genes were selected from the six Aiptasia genomic actin loci using normalized expression levels (Fragments Per Kilobase of transcript per Million mapped reads; FPKM) from previously published transcriptomes19; FPKM values of each gene model were averaged across four assemblies (two aposymbiotic and two symbiotic replicates) to generate a mean FPKM reflecting global expression in larvae. The MyHC1 promoter was replaced through classical restriction-enzyme cloning with 1.5 kb upstream of the start codon of each of four Aiptasia actin genes. Aiptasia genomic DNA (gDNA) was extracted from individual small symbiotic adults of clonal line CC7 using the DNeasy Blood & Tissue Kit (Qiagen) according to the manufacturer’s instructions, and the promoters amplified by PCR (primers and related information in Supp. Table S1.)
Solutions of protein, mRNA, and DNA for microinjection
Lifeact-eGFP protein was injected at a concentration of ~3.4 mg/ml, using the green fluorescence of the protein as an injection tracer. For mRNA, an aliquot of 600 ng/µl was thawed and mixed 1:1 with 0.5% phenol red in RNAse-free water as an injection tracer, for a final concentration of 300 ng/µl mRNA. For DNA plasmids, a 2 µl aliquot of DNA at 250 ng/µl was quick-thawed and mixed with 2.1 µl of either 0.5% phenol red or 10,000 MW dextran coupled to Alexa-594 dye (Invitrogen) at a final injection concentration of 0.2–0.5 µg/µl (see below), 0.5 µl CutSmart Buffer (NEB), and 0.4 µl of the meganuclease I-SceI at 5 units/µl (NEB), for a final concentration of 100 ng/µl DNA and 0.4 U/µl enzyme. The mixture was incubated at 37 °C for 10–20 min while the microinjection apparatus was assembled. Phenol red, a pH indicator that appears yellow when intracellular but red in seawater, provides a clear indication of when injection has been successful and, crucially, does not interfere with later fluorescence. Its disadvantage is that it quickly dissipates within zygotes, requiring transfer to a separate dish soon after injection while the tracer can still be seen, interrupting the work. The fluorescent tracer is preferable when possible because it remains visible for longer and facilitates later selection of injected zygotes.
Following Wessel and colleagues39, the injection dish was prepared ahead of time by affixing a strip of 80 × 80 μm nylon mesh (# SW10080.010.010, www. Meerwassershop.de, Germany) to the lower inside surface of a small petri dish lid (35 × 10 mm), using a line of silicon grease around the edges of the mesh (Fig. S1B). FASW was then added to cover the bottom entirely. Zygotes were concentrated in the center of the fertilization dish by gentle rotation, and slowly taken up with a 10 µl pipette with a plastic disposable tip. The zygotes were gently ejected into the injection dish under water, so that they fell sparsely in a stripe onto the mesh and settled into the holes. Zygotes and developing embryos are sensitive and should be pipetted as gently as possible to avoid developmental defects.
Injection solution was loaded into a Femtotip needle (Eppendorf) using Microloader tips (Eppendorf) and allowed to run into the tip by gravity flow. Microinjections were performed with a manual micromanipulator (U-31CF micromanipulator, Narishige, Japan) with a standard universal capillary holder (Eppendorf) and Femtotip adapter (Eppendorf) attached to a FemtoJet 4i microinjector (Eppendorf). The angle of the needle holder to the bench-top was approximately 55°. Either the “constant flow” or the “injection” setting on the microinjector was used to deliver the solution into the cell. Solution flow and approximate injected amount (roughly 1/3 cell diameter or approximately 10% of cell volume) were visually assessed during the session and the pressure adjusted as necessary; the needle tip may occasionally need to be broken to remove blockages and then the injection pressure recalibrated. Microinjections were conducted either on a Nikon SMZ18 stereoscope or a Leica MSV269 stereoscope using a 0.5x objective or 1x objective, respectively. Injection was conducted either under white illumination to visualize zygotes and phenol red tracer, or, when applicable, indirect white illumination together with additional epifluorescent illumination and filters to visualize protein/tracer fluorescence. We injected by keeping the dish stationary and moving the needle between zygotes and along its own axis to enter each zygote.
Zygotes were injected for approximately 60 min, until the onset of cleavage approximately 90 min after fertilization. Zygotes injected using the tracer phenol red were transferred immediately after injection by aspirating them individually into the well of a 6-well culture plate filled with approximately 5 ml of FASW using a P10 pipette. Zygotes injected with Lifeact-eGFP or other fluorescent tracer could be distinguished from non-injected zygotes and transferred at the end of the injection session. Eggs that were uninjected but otherwise handled identically in all steps, including addition to and removal from the injection dish, served as controls. Plates with microinjected embryos were kept in the dark at 29 °C to develop.
Assay of symbiosis establishment in larvae
Infection of injected or control larvae with Symbiodinium strain SSB0114 was performed as described previously17. Briefly, 2 dpf larvae, which by this point possess a mouth, were kept in 5 ml of FASW in a 6-well plate, and algae were added to a final concentration of 100,000 algal cells/ml and mixed gently with a pipette. Algae and larvae were co-cultivated for 1 or 3 days, after which larvae were fixed, mounted on slides, and assessed by epifluorescence microscopy, as described below. Infection rates were determined by counting the number of larvae containing algae (percent infected) and the number of algal cells that each infected larva contained, as described previously17.
Microscopy and image analysis
Transmitted light and fluorescence images of live zygotes in Fig. 1 and Supp. Fig. 1 were acquired using a Nikon SMZ18 binocular microscope. For imaging of fixed samples in Figs 2–4, larvae were incubated for 15 min in 3.7% formaldehyde in FASW, washed three times in PBS containing 0.2% Triton X-100, and then mounted in 87% glycerol in PBS with DABCO 2.5 mg/ml.
For live imaging in Figs 1E, S3, and Supp. Movie 1, samples were embedded in agarose to restrict movement. Each imaging chamber was a small petri dish with a drilled hole in the bottom (diameter = 1.5 cm), which was then sealed by a #1 coverslip (#H877, Roth, Germany) glued to the exterior. Larvae were collected into a volume of 5–10 µl FASW and gently transferred to the dish bottom in the middle of the coverslip. 25 µl of liquid 1.8% low-melt agarose (Sigma-Aldrich, # A9414) in FASW at 37 °C was added to the larvae on the coverslip and briefly mixed. A small round coverslip was immediately placed on top and very lightly pressed. 5 ml of FASW was then added and the petri dish sealed to prevent evaporation. Images in Fig. 2 were acquired using a Nikon A1 confocal microscope with a Nikon Plan Fluor 60x water immersion objective and Nikon Elements software. Images in Figs 3 and 4 were acquired with a Leica SP8 confocal laser scanning microscope and a 63 × /1.30 glycerol immersion lens using Leica LAS X software. Fluorophores were excited with 488 nm and 594 nm laser lines. GFP was detected at 493–571 nm, mCherry at 599–650 nm, and algal red autofluorescence at 656–692 nm. All image processing was performed using Fiji40.
Data Availability Statement
Plasmids and strains referenced here are available from the authors on request.
Muscatine, L. The role of symbiotic algae in carbon and energy flux in coral reefs. In Coral Reefs (ed. Zubinsky, Z.) 75–87 (Elsevier, 1990).
Yellowlees, D., Rees, T. A. V. & Leggat, W. Metabolic interactions between algal symbionts and invertebrate hosts. Plant Cell Environ. 31, 679–694 (2008).
van Oppen, M. In vitro establishment of symbiosis in Acropora millepora planulae. Coral Reefs 20, 200 (2001).
Wakefield, T. S. & Kempf, S. C. Development of host- and symbiont-specific monoclonal antibodies and confirmation of the origin of the symbiosome membrane in a cnidarian-dinoflagellate symbiosis. Biol. Bull. 200, 127–143 (2001).
Rodriguez-Lanetty, M., Wood-Charlson, E., Hollingsworth, L., Krupp, D. & Weis, V. Temporal and spatial infection dynamics indicate recognition events in the early hours of a dinoflagellate/coral symbiosis. Mar. Biol. 149, 713–719 (2006).
Harii, S., Yasuda, N., Rodriguez-Lanetty, M., Irie, T. & Hidaka, M. Onset of symbiosis and distribution patterns of symbiotic dinoflagellates in the larvae of scleractinian corals. Mar. Biol. 156, 1203–1212 (2009).
Babcock, R. C. et al. Synchronous spawnings of 105 scleractinian coral species on the Great Barrier Reef. Mar. Biol. 90, 379–394 (1986).
Harrison, P. L. Sexual reproduction of scleractinian corals. In Coral Reefs: an Ecosystem in Transition (eds Zubinsky, Z. & Stambler, N.) 59–85 (Springer, 2011).
Technau, U. & Steele, R. E. Evolutionary crossroads in developmental biology: Cnidaria. Development 138, 1447–1458 (2011).
Weis, V. M., Davy, S. K., Hoegh-Guldberg, O., Rodriguez-Lanetty, M. & Pringle, J. R. Cell biology in model systems as the key to understanding corals. Trends Ecol. Evol. 23, 369–376 (2008).
Goldstein, B. & King, N. The future of cell biology: Emerging model organisms. Trends Cell Biol. 26, 818–824 (2016).
Sunagawa, S. et al. Generation and analysis of transcriptomic resources for a model system on the rise: the sea anemone Aiptasia pallida and its dinoflagellate endosymbiont. BMC Genomics 10, 258 (2009).
Lehnert, E. M. et al. Extensive differences in gene expression between symbiotic and aposymbiotic cnidarians. G3 (Bethesda) 4, 277–295 (2014).
Xiang, T., Hambleton, E. A., DeNofrio, J. C., Pringle, J. R. & Grossman, A. R. Isolation of clonal axenic strains of the symbiotic dinoflagellate Symbiodinium and their growth and host specificity. J. Phycol. 49, 447–458 (2013).
Baumgarten, S. et al. The genome of Aiptasia, a sea anemone model for coral symbiosis. Proc. Natl. Acad. Sci. USA 112, 11893–11898 (2015).
Grawunder, D. et al. Induction of gametogenesis in the cnidarian endosymbiosis model Aiptasia sp. Sci. Rep. 5, 15677 (2015).
Bucher, M., Wolfowicz, I., Voss, P. A., Hambleton, E. A. & Guse, A. Development and symbiosis establishment in the cnidarian endosymbiosis model Aiptasia sp. Sci. Rep. 6, 19867 (2016).
Hambleton, E. A., Guse, A. & Pringle, J. R. Similar specificities of symbiont uptake by adults and larvae in an anemone model system for coral biology. J. Exp. Biol. 17, 1613–1619 (2014).
Wolfowicz, I. et al. Aiptasia sp. larvae as a model to reveal mechanisms of symbiont selection in cnidarians. Sci. Rep. 6, 32366 (2016).
Yasuoka, Y., Shinzato, C. & Satoh, N. The mesoderm-forming gene brachyury regulates ectoderm-endoderm demarcation in the coral Acropora digitifera. Curr. Biol. 26, 2885–2892 (2016).
Wittlieb, J., Khalturin, K., Lohmann, J. U., Anton-Erxleben, F. & Bosch, T. C. Transgenic Hydra allow in vivo tracking of individual stem cells during morphogenesis. Proc. Natl. Acad. Sci. USA 103, 6208–6211 (2006).
Momose, T. & Houliston, E. Two oppositely localised frizzled RNAs as axis determinants in a cnidarian embryo. PLoS Biol. 5, e70 (2007).
Renfer, E., Amon-Hassenzahl, A., Steinmetz, P. R. & Technau, U. A muscle-specific transgenic reporter line of the sea anemone, Nematostella vectensis. Proc. Natl. Acad. Sci. USA 107, 104–108 (2010).
Künzel, T. et al. Migration and differentiation potential of stem cells in the cnidarian Hydractinia analysed in eGFP-transgenic animals and chimeras. Dev. Biol. 348, 120–129 (2010).
Marlow, H., Roettinger, E., Boekhout, M. & Martindale, M. Q. Functional roles of Notch signaling in the cnidarian Nematostella vectensis. Dev. Biol. 362, 295–308 (2012).
Layden, M. J., Röttinger, E., Wolenski, F. S., Gilmore, T. D. & Martindale, M. Q. Microinjection of mRNA or morpholinos for reverse genetic analysis in the starlet sea anemone. Nematostella vectensis. Nat. Protoc. 8, 924–934 (2013).
Ikmi, A., McKinney, S. A., Delventhal, K. M. & Gibson, M. C. TALEN and CRISPR/Cas9-mediated genome editing in the early-branching metazoan Nematostella vectensis. Nat. Comm. 5, 5486 (2014).
Artigas, G. Q. et al. A gonad-expressed opsin mediates light-induced spawning in the jellyfish Clytia. eLife 7, e29555 (2018).
Riedl, J. et al. Liefeact: a versatile marker to visualize F-actin. Nat. Meth. 5, 605–607 (2008).
Sliogeryte, K. et al. Differential effects of LifeAct-GFP and actin-GFP on cell mechanics assessed using micropipette aspiration. J. Biomech. 49, 310–317 (2016).
Grabher, C. & Wittbrodt, J. Meganuclease and transposon mediated transgenesis in medaka. Genome Biol. 8(Suppl 1), S10 (2007).
Renfer, E. & Technau, U. Meganuclease-assisted generation of stable transgenics in the sea anemone Nematostella vectensis. Nat. Prot. 12, 1844–1854 (2017).
DuBuc, T. Q. et al. In vivo imaging of Nematostella vectensis embryogenesis and late development using fluorescent probes. BMC Cell Biol. 15, 44 (2014).
Böttger, A. et al. GFP expression in Hydra: lessons from the particle gun. Dev. Genes Evol. 212, 302–305 (2002).
Bosch, T. C., Augustin, R., Gellner, K., Khalturin, K. & Lohmann, J. U. In vivo electroporation for genetic manipulations of whole Hydra polyps. Differentiation 70, 140–147 (2002).
Watanabe, H. et al. Nodal signalling determines biradial asymmetry in Hydra. Nature 515, 112–115 (2014).
Cook, C. E. et al. Old knowledge and new technologies allow rapid development of model organisms. Mol. Biol. Cell. 27(6), 882–887 (2016).
Kim, J. H. et al. High cleavage efficiency of a 2A peptide derived from porcine teschovirus-1 in human cell lines, zebrafish and mice. PLoS One 6, e18556 (2011).
Wessel, G. M., Reich, A. M. & Klatsky, P. C. Use of sea stars to study basic reproductive processes. Syst. Biol. Reprod. Med. 56, 236–245 (2010).
Schindelin, J. et al. Fiji: an open-source platform for biological-image analysis. Nat. Meth. 9, 676–682 (2012).
We thank Natascha Bechtoldt, Marie Jacobovitz, and Gideon Bergheim for technical help, and Steffen Lemke, Thomas Holstein, Mark Lommel, Suat Özbek, Jochen Wittbrodt, and Aissam Ikmi for advice, comments, and sharing reagents and equipment. We also thank Christian Ackermann at the Heidelberg Nikon Imaging Center for technical support with microscopy. This work was supported by the Deutsche Forschungsgemeinschaft (DFG) [Emmy Noether Program Grant GU 1128/3-1 to A.G.], by the European Commission Seventh Framework Marie-Curie Actions [FP7-PEOPLE-2013-CIG to A.G.], by the H2020 European Research Council [ERC Consolidator Grant 724715 to A.G.]; and by the European Molecular Biology Organization [Long-Term Fellowship to V.A.S.J.].
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Jones, V.A.S., Bucher, M., Hambleton, E.A. et al. Microinjection to deliver protein, mRNA, and DNA into zygotes of the cnidarian endosymbiosis model Aiptasia sp.. Sci Rep 8, 16437 (2018). https://doi.org/10.1038/s41598-018-34773-1
- Symbiosis Establishment
- Coral-algal Symbiosis
- Injection Dish
Scientific Reports (2019)
BMC Genomics (2019)
Molecular convergence and positive selection associated with the evolution of symbiont transmission mode in stony corals
Proceedings of the Royal Society B: Biological Sciences (2019)
Integrative and Comparative Biology (2019)