Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Inhibition of halide oxidation and deprotonation of organic cations with dimethylammonium formate for air-processed p–i–n perovskite solar cells

Nature Energy (2024)Cite this article

Subjects

Abstract

The manufacturing of perovskite solar cells under ambient conditions is desirable, yet the efficiency of p–i–n perovskite solar cells fabricated in air still lags behind those made in an inert atmosphere. Here we introduce an ionic pair stabilizer, dimethylammonium formate (DMAFo), into the perovskite precursor solution to prevent the degradation of perovskite precursors. DMAFo inhibits the oxidization of iodide ions and deprotonation of organic cations, improving the crystallinity and reducing defects in the resulting perovskite films. We show the generation of additional p-type defects during ambient air fabrication that suggests the need for improving bulk properties of the perovskite film beyond surface passivation. Upon addition of DMAFo, we demonstrate that the efficiency of inverted p–i–n solar cells based on perovskite layers with 1.53-eV and 1.65-eV bandgaps fabricated under ambient conditions (25–30 °C, 35–50% relative humidity) increases by 15–20%. We achieve a certified stabilized efficiency of 24.72% for the 1.53-eV cell, on a par with state-of-the-art counterparts fabricated in an inert atmosphere.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Stabilization of perovskite precursor solution in ambient air with DMAFo.
Fig. 2: Impact of the DMAFo on the perovskite’s crystallization in ambient air.
Fig. 3: Surface and bulk improvements of perovskite films fabricated in ambient air.
Fig. 4: Enhanced p–i–n perovskite solar cells fabricated in ambient air.

Similar content being viewed by others

Data availability

All data generated or analysed during this study are included in the published article and its Supplementary Information. Source data are provided with this paper.

References

  1. Polman, A., Knight, M., Garnett, E. C., Ehrler, B. & Sinke, W. C. Photovoltaic materials: present efficiencies and future challenges. Science 352, aad4424 (2016).

    Article  PubMed  Google Scholar 

  2. National Renewable Energy Laboratory Best Research-cell Efficiency Chart (NREL, 2023); https://www.nrel.gov/pv/cell-efficiency.html

  3. Park, J. et al. Controlled growth of perovskite layers with volatile alkylammonium chlorides. Nature 616, 724–730 (2023).

    Article  ADS  CAS  PubMed  Google Scholar 

  4. Chen, H. et al. Quantum-size-tuned heterostructures enable efficient and stable inverted perovskite solar cells. Nat. Photonics 16, 352–358 (2022).

    Article  ADS  CAS  Google Scholar 

  5. Jiang, Q. et al. Surface reaction for efficient and stable inverted perovskite solar cells. Nature 611, 278–283 (2022).

    Article  ADS  CAS  PubMed  Google Scholar 

  6. Li, Z. et al. Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells. Science 376, 416–420 (2022).

    Article  ADS  CAS  PubMed  Google Scholar 

  7. Peng, W. et al. Reducing nonradiative recombination in perovskite solar cells with a porous insulator contact. Science 379, 683–690 (2023).

    Article  ADS  CAS  PubMed  Google Scholar 

  8. Bush, K. A. et al. 23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability. Nat. Energy 2, 17009 (2017).

    Article  ADS  CAS  Google Scholar 

  9. Xu, J. et al. Triple-halide wide-band gap perovskites with suppressed phase segregation for efficient tandems. Science 367, 1097–1104 (2020).

    Article  ADS  CAS  PubMed  Google Scholar 

  10. Tan, Q. et al. Inverted perovskite solar cells using dimethylacridine-based dopants. Nature https://doi.org/10.1038/s41586-023-06207-0 (2023).

    Article  PubMed  PubMed Central  Google Scholar 

  11. Zhang, S. et al. Minimizing buried interfacial defects for efficient inverted perovskite solar cells. Science 380, 404–409 (2023).

    Article  ADS  CAS  PubMed  Google Scholar 

  12. Chen, S. et al. Stabilizing perovskite-substrate interfaces for high-performance perovskite modules. Science 373, 902–907 (2021).

    Article  ADS  CAS  PubMed  Google Scholar 

  13. Li, M. et al. Stabilizing perovskite precursor by synergy of functional groups for NiOx-based inverted solar cells with 23.5% efficiency. Angew. Chem. Int. Ed. Engl. 61, e202206914 (2022).

    Article  CAS  PubMed  Google Scholar 

  14. Sveinbjörnsson, K. et al. Ambient air-processed mixed-ion perovskites for high-efficiency solar cells. J. Mater. Chem. A 4, 16536–16545 (2016).

    Article  Google Scholar 

  15. Krishna, B. G., Sundar Ghosh, D. & Tiwari, S. Progress in ambient air-processed perovskite solar cells: insights into processing techniques and stability assessment. Sol. Energy 224, 1369–1395 (2021).

    Article  ADS  CAS  Google Scholar 

  16. Jiang, Q. et al. Planar-structure perovskite solar cells with efficiency beyond 21. Adv. Mater. 29, 1703852 (2017).

    Article  Google Scholar 

  17. Kim, Y. C. et al. Beneficial effects of PbI2 incorporated in organo-lead halide perovskite solar cells. Adv. Energy Mater. 6, 1502104 (2016).

    Article  Google Scholar 

  18. Du, Y. et al. Ionic liquid treatment for highest-efficiency ambient printed stable all-inorganic CsPbI3 perovskite solar cells. Adv. Mater. 34, e2106750 (2022).

    Article  PubMed  Google Scholar 

  19. Akin, S., Akman, E. & Sonmezoglu, S. FAPbI3-based perovskite solar cells employing hexyl-based ionic liquid with an efficiency over 20% and excellent long-term stability. Adv. Funct. Mater. 30, 2002964 (2020).

    Article  CAS  Google Scholar 

  20. Li, T. et al. Multiple functional groups synergistically improve the performance of inverted planar perovskite solar cells. Nano Energy 82, 105742 (2021).

    Article  CAS  Google Scholar 

  21. Wang, Y. et al. Efficient and stable perovskite solar cells by fluorinated ionic liquid-induced component interaction. Sol. RRL 5, 2000582 (2020).

    Article  Google Scholar 

  22. Bai, S. et al. Planar perovskite solar cells with long-term stability using ionic liquid additives. Nature 571, 245–250 (2019).

    Article  ADS  CAS  PubMed  Google Scholar 

  23. Lin, Y. H. et al. A piperidinium salt stabilizes efficient metal-halide perovskite solar cells. Science 369, 96–102 (2020).

    Article  ADS  CAS  PubMed  Google Scholar 

  24. Du, M. et al. High-pressure nitrogen-extraction and effective passivation to attain highest large-area perovskite solar module efficiency. Adv. Mater. 32, e2004979 (2020).

    Article  PubMed  Google Scholar 

  25. Zhu, X. et al. Ionic-liquid-perovskite capping layer for stable 24.33%-efficient solar cell. Adv. Energy Mater. 12, 2103491 (2021).

    Article  Google Scholar 

  26. Caprioglio, P. et al. Bi-functional interfaces by poly(ionic liquid) treatment in efficient pin and nip perovskite solar cells. Energy Environ. Sci. 14, 4508–4522 (2021).

    Article  CAS  Google Scholar 

  27. Zhu, X. et al. High-efficiency perovskite solar cells with imidazolium-based ionic liquid for surface passivation and charge transport. Angew. Chem. Int. Ed. Engl. 60, 4238–4244 (2021).

    Article  CAS  PubMed  Google Scholar 

  28. Hui, W. et al. Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity. Science 371, 1359–1364 (2021).

    Article  ADS  CAS  PubMed  Google Scholar 

  29. Chao, L. et al. Direct and stable α-phase formation via ionic liquid solvation for formamidinium-based perovskite solar cells. Joule 6, 2203–2217 (2022).

    Article  CAS  Google Scholar 

  30. Chao, L. F. et al. Room-temperature molten salt for facile fabrication of efficient and stable perovskite solar cells in ambient air. Chem 5, 995–1006 (2019).

    Article  CAS  Google Scholar 

  31. McMeekin, D. P. et al. Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells. Nat. Mater. 22, 73–83 (2023).

    Article  ADS  CAS  PubMed  Google Scholar 

  32. Dou, B. et al. Degradation of highly alloyed metal halide perovskite precursor inks: mechanism and storage solutions. ACS Energy Lett. 3, 979–985 (2018).

    Article  ADS  CAS  Google Scholar 

  33. Noel, N. K. et al. Unveiling the influence of pH on the crystallization of hybrid perovskites, delivering low voltage loss photovoltaics. Joule 1, 328–343 (2017).

    Article  CAS  Google Scholar 

  34. Meng, X. et al. Highly reproducible and efficient FASnI3 perovskite solar cells fabricated with volatilizable reducing solvent. J. Phys. Chem. Lett. 11, 2965–2971 (2020).

    Article  CAS  PubMed  Google Scholar 

  35. Jeong, J. et al. Pseudo-halide anion engineering for alpha-FAPbI3 perovskite solar cells. Nature 592, 381–385 (2021).

    Article  ADS  CAS  PubMed  Google Scholar 

  36. Li, Z. H. et al. 4-hydrazinobenzoic-acid antioxidant for high-efficiency Sn-Pb alloyed perovskite solar cells. Energy Technol. 10, 2200217 (2022).

    Article  CAS  Google Scholar 

  37. Li, G. X. et al. Ionic liquid stabilizing high-efficiency tin halide perovskite solar cells. Adv. Energy Mater. 11, 2101539 (2021).

    Article  CAS  Google Scholar 

  38. Niu, T. T. et al. Ionic liquids-enabled efficient and stable perovskite photovoltaics: progress and challenges. ACS Energy Lett. 6, 1453–1479 (2021).

    Article  CAS  Google Scholar 

  39. Yang, W. S. et al. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange. Science 348, 1234–1237 (2015).

    Article  ADS  CAS  PubMed  Google Scholar 

  40. Wu, W. Q. et al. Bilateral alkylamine for suppressing charge recombination and improving stability in blade-coated perovskite solar cells. Sci. Adv. 5, eaav8925 (2019).

    Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

  41. Kerner, R. A., Xu, Z. J., Larson, B. W. & Rand, B. P. The role of halide oxidation in perovskite halide phase separation. Joule 5, 2273–2295 (2021).

    Article  CAS  Google Scholar 

  42. Zhang, W. et al. Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells. Nat. Commun. 6, 10030 (2015).

    Article  ADS  CAS  PubMed  Google Scholar 

  43. Chen, S., Xiao, X., Gu, H. & Huang, J. Iodine reduction for reproducible and high-performance perovskite solar cells and modules. Sci. Adv. 7, eabe8130 (2021).

    Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

  44. Gratia, P. et al. The many faces of mixed ion perovskites: unraveling and understanding the crystallization process. ACS Energy Lett. 2, 2686–2693 (2017).

    Article  CAS  Google Scholar 

  45. Meng, H. et al. Chemical composition and phase evolution in DMAI-derived inorganic perovskite solar cells. ACS Energy Lett. 5, 263–270 (2019).

    Article  Google Scholar 

  46. Shao, Z. et al. Cs4PbI6-mediated synthesis of thermodynamically stable FA0.15Cs0.85PbI3 perovskite solar cells. Adv. Mater. 32, e2001054 (2020).

    Article  PubMed  Google Scholar 

  47. Stolterfoht, M. et al. Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells. Nat. Energy 3, 847–854 (2018).

    Article  ADS  CAS  Google Scholar 

  48. Hoke, E. T. et al. Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics. Chem. Sci. 6, 613–617 (2015).

    Article  CAS  PubMed  Google Scholar 

  49. An, K. et al. Direct observation of crystal engineering in perovskite solar cells in a moisture-free environment using conductive atomic force microscopy and friction force microscopy. J. Phys. Chem. C 124, 4946–4952 (2020).

    Article  CAS  Google Scholar 

  50. Fairfield, D. J. et al. Structure and chemical stability in perovskite–polymer hybrid photovoltaic materials. J. Mater. Chem. A 7, 1687–1699 (2019).

    Article  CAS  Google Scholar 

  51. Tan, S. et al. Stability-limiting heterointerfaces of perovskite photovoltaics. Nature 605, 268–273 (2022).

    Article  ADS  CAS  PubMed  Google Scholar 

  52. Tong, J. H. et al. Carrier control in Sn-Pb perovskites via 2D cation engineering for all-perovskite tandem solar cells with improved efficiency and stability. Nat. Energy 7, 642–651 (2022).

    Article  ADS  CAS  Google Scholar 

  53. Sproul, A. B. Dimensionless solution of the equation describing the effect of surface recombination on carrier decay in semiconductors. J. Appl. Phys. 76, 2851–2854 (1994).

    Article  ADS  CAS  Google Scholar 

  54. Chen, H. et al. Regulating surface potential maximizes voltage in all-perovskite tandems. Nature 613, 676–681 (2023).

    Article  ADS  CAS  PubMed  Google Scholar 

  55. Zhu, Z. J. et al. Correlating the perovskite/polymer multi-mode reactions with deep-level traps in perovskite solar cells. Joule 6, 2849–2868 (2022).

    Article  CAS  Google Scholar 

  56. Tang, R. et al. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency. Nat. Energy 5, 587–595 (2020).

    Article  ADS  CAS  Google Scholar 

  57. Chen, J. & Park, N. G. Causes and solutions of recombination in perovskite solar cells. Adv. Mater. 31, e1803019 (2019).

    Article  PubMed  Google Scholar 

  58. Cao, Q. et al. Efficient and stable inverted perovskite solar cells with very high fill factors via incorporation of star-shaped polymer. Sci. Adv. 7, eabg0633 (2021).

    Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

  59. Yan, L. et al. Fabrication of perovskite solar cells in ambient air by blocking perovskite hydration with guanabenz acetate salt. Nat. Energy 8, 1158–1167 (2023).

    Article  ADS  CAS  Google Scholar 

  60. Shi, L. et al. Gas chromatography-mass spectrometry analyses of encapsulated stable perovskite solar cells. Science 368, eaba2412 (2020).

    Article  CAS  PubMed  Google Scholar 

  61. Saliba, M. et al. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science 354, 206–209 (2016).

    Article  ADS  CAS  PubMed  Google Scholar 

  62. Mosconi, E., Meggiolaro, D., Snaith, H. J., Stranks, S. D. & De Angelis, F. Light-induced annihilation of Frenkel defects in organo-lead halide perovskites. Energy Environ. Sci. 9, 3180–3187 (2016).

    Article  CAS  Google Scholar 

  63. Khenkin, M. V. et al. Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures. Nat. Energy 5, 35–49 (2020).

    Article  ADS  Google Scholar 

Download references

Acknowledgements

We acknowledge the staff of the Shanghai Synchrotron Radiation Facility (SSRF, BL14B1, BL14W1 and BL03HB beamline, project number 2020-SSRF-PT-014606), J. Xue (National Synchrotron Radiation Laboratory, University of Science and Technology of China) for helpful discussion and the Anhui Absorption Spectroscopy Analysis Instrument Co. for XAFS measurements and analysis. This work was partially carried out at the Instruments Center for Physical Science, University of Science and Technology of China. Funding: the work was supported by the National Natural Science Foundation of China (number 52172246); Anhui Province Industrial Innovation Project (AHZDCYCX-LSDT2023-09); National Key R&D Program of China (number 2021YFF0501900); the Institute of Energy, Hefei Comprehensive National Science Center (number 21KZS212); the Cornerstone Science Foundation through an XPLORER PRIZE to Jixian Xu and Fundamental research funds for the central universities (WK3430000009).

Author information

Author notes

  1. These authors contributed equally: Hongguang Meng, Kaitian Mao, Fengchun Cai, Kai Zhang.

Authors and Affiliations

  1. Key Laboratory of Precision and Intelligent Chemistry, CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei, China

    Hongguang Meng, Kaitian Mao, Fengchun Cai, Shaojie Yuan, Tieqiang Li, Zhengjie Zhu, Xingyu Feng, Wei Peng, Jiahang Xu, Yan Gao, Weiwei Chen, Xiaojun Wu & Jixian Xu

  2. Hefei National Research Center for Physical Sciences at the Microscale, Hefei, China

    Kai Zhang & Weiwei Chen

  3. Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo City, China

    Fangfang Cao & Chuanxiao Xiao

  4. Shanghai Synchrotron Radiation Facility (SSRF), Shanghai Advanced Research Institute, Chinese Academy of Sciences, Shanghai, China

    Zhenhuang Su

  5. Ningbo New Materials Testing and Evaluation Center Co., Ningbo City, China

    Chuanxiao Xiao

  6. Chemical and Biological Engineering, University of Colorado, Boulder, CO, USA

    Michael D. McGehee

  7. Institute of Energy, Hefei Comprehensive National Science Center, Hefei, China

    Jixian Xu

Authors
  1. Hongguang Meng
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Kaitian Mao
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Fengchun Cai
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Kai Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Shaojie Yuan
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Tieqiang Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Fangfang Cao
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Zhenhuang Su
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Zhengjie Zhu
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Xingyu Feng
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Wei Peng
    View author publications

    You can also search for this author in PubMed Google Scholar

  12. Jiahang Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

  13. Yan Gao
    View author publications

    You can also search for this author in PubMed Google Scholar

  14. Weiwei Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

  15. Chuanxiao Xiao
    View author publications

    You can also search for this author in PubMed Google Scholar

  16. Xiaojun Wu
    View author publications

    You can also search for this author in PubMed Google Scholar

  17. Michael D. McGehee
    View author publications

    You can also search for this author in PubMed Google Scholar

  18. Jixian Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

Jixian Xu conceived and directed the project. M.D.M., H.M. and Jixian Xu reviewed the experiment, analysed the data and wrote the manuscript, and all authors discussed the results and commented on the manuscript. H.M. synthesized the ionic liquids, fabricated films/devices and conducted XRD/UV–vis/GIWAXs/PLQY/stability measurements. K.M. and W.P. helped fabricate and characterize the devices. F. Cai performed the device simulations. C.X. and F. Cao conducted KPFM characterizations. Z.S. helped carry out GIWAXS, EXAFS and analyse data. S.Y. and Z.Z. carried out the NMR measurement. X.W., K.Z. and Y.G. performed density functional theory calculations. T.L. and X.F. helped collect and analyse XPS data. Jiahang Xu and W.C. helped synthesize and characterize the ionic liquids.

Corresponding author

Correspondence to Jixian Xu.

Ethics declarations

Competing interests

M.D.M. is an adviser to Swift Solar. University of Science and Technology of China (USTC) has filed patents related to the subject matter of this manuscript. The remaining authors declare no competing interests.

Peer review

Peer review information

Nature Energy thanks Dong Suk Kim, Min Kim and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Figs. 1–24, Notes 1–10, Tables 1–3 and references.

Reporting Summary

Supplementary Data 1

Statistical source data for Supplementary Fig. 13.

Source data

Source Data Fig. 4

Source data for Fig. 4k,m.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Meng, H., Mao, K., Cai, F. et al. Inhibition of halide oxidation and deprotonation of organic cations with dimethylammonium formate for air-processed p–i–n perovskite solar cells. Nat Energy (2024). https://doi.org/10.1038/s41560-024-01471-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1038/s41560-024-01471-4

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing