Article | Published:

Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries

Nature Energyvolume 3pages674681 (2018) | Download Citation

Abstract

Non-flammable electrolytes could intrinsically eliminate fire hazards and improve battery safety, but their compatibility with electrode materials, especially graphite anodes, remains an obstacle owing to the strong catalytic activity of the anode surfaces. Here, we report an approach that improves the stability of non-flammable phosphate electrolytes by adjusting the molar ratio of Li salt to solvent. At a high Li salt-to-solvent molar ratio (~1:2), the phosphate solvent molecules are mostly coordinated with the Li+ cations, and the undesired reactivity of the solvent molecules toward the graphite anode can be effectively suppressed. High cycling Coulombic efficiency (99.7%), good cycle life and safe operation of commercial 18650 Li-ion cells with these electrolytes are demonstrated. In addition, these non-flammable electrolytes show reduced reactivity toward Li-metal electrodes. Non-dendritic Li-metal plating and stripping in Li–Cu half-cells are demonstrated with high Coulombic efficiency (>99%) and good stability.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

References

  1. 1.

    Li, S. et al. A poly(3-decyl thiophene)-modified separator with self-actuating overcharge protection mechanism for LiFePO4-based lithium ion battery. J. Power Sources 196, 7021–7024 (2011).

  2. 2.

    Zhang, H., Cao, Y., Yang, H., Lu, S. & Ai, X. Facile preparation and electrochemical characterization of poly (4-methoxytriphenylamine)-modified separator as a self-activated potential switch for lithium ion batteries. Electrochim. Acta 108, 191–195 (2013).

  3. 3.

    Ji, W., Jiang, B., Ai, F., Yang, H. & Ai, X. Temperature-responsive microspheres-coated separator for thermal shutdown protection of lithium ion batteries. RSC Adv. 5, 172–176 (2015).

  4. 4.

    Xu, M. et al. Application of cyclohexyl benzene as electrolyte additive for overcharge protection of lithium ion battery. J. Power Sources 184, 427–431 (2008).

  5. 5.

    Xia, L., Li, S.-L., Ai, X.-P., Yang, H.-X. & Cao, Y.-L. Temperature-sensitive cathode materials for safer lithium-ion batteries. Energy Environ. Sci. 4, 2845–2848 (2011).

  6. 6.

    Chen, Z. et al. Fast and reversible thermoresponsive polymer switching materials for safer batteries. Nat. Energy 1, 15009 (2016).

  7. 7.

    Zhang, L., Zhang, Z., Wu, H. & Amine, K. Novel redox shuttle additive for high-voltage cathode materials. Energy Environ. Sci. 4, 2858–2862 (2011).

  8. 8.

    Weng, W., Huang, J., Shkrob, I. A., Zhang, L., & Zhang, Z. Redox shuttles with axisymmetric scaffold for overcharge protection of lithium-ion batteries. Adv. Energy Mat. 6, 1600795 (2016).

  9. 9.

    Zhang, L., Zhang, Z., Wu, H. & Amine, K. High-power all-solid-state batteries using sulfide superionic conductors. Nat. Energy 1, 16030 (2016).

  10. 10.

    Wenzel, S. et al. Direct observation of the interfacial instability of the fast ionic conductor Li10GeP2S12 at the lithium metal anode. Chem. Mater. 28, 2400–2407 (2016).

  11. 11.

    Richards, W. D., Miara, L. J., Wang, Y., Kim, J. C. & Ceder, G. Interface stability in solid-state batteries. Chem. Mater. 28, 266–273 (2016).

  12. 12.

    Feng, J. & Lu, L. A novel bifunctional additive for safer lithium ion batteries. J. Power Sources 243, 29–32 (2013).

  13. 13.

    Jin, Z., Gao, H., Kong, C., Zhan, H. & Li, Z. A novel phosphate-based flame retardant and film-forming electrolyte additive for lithium ion batteries. ECS Electrochem. Lett. 2, A66–A68 (2013).

  14. 14.

    Xia, L., Xia, Y. & Liu, Z. A novel fluorocyclophosphazene as bifunctional additive for safer lithium-ion batteries. J. Power Sources 278, 190–196 (2015).

  15. 15.

    Zhu, X., Jiang, X., Ai, X., Yang, H. & Cao, Y. Bis(2,2,2-Trifluoroethyl) ethylphosphonate as novel high-efficient flame retardant additive for safer lithium-ion battery. Electrochim. Acta 165, 67–71 (2015).

  16. 16.

    Feng, J. K., Sun, X. J., Ai, X. P., Cao, Y. L. & Yang, H. X. Dimethyl methyl phosphate: A new nonflammable electrolyte solvent for lithium-ion batteries. J. Power Sources 184, 570–573 (2008).

  17. 17.

    Xiang, H. F., Jin, Q. Y., Wang, R., Chen, C. H. & Ge, X. W. Nonflammable electrolyte for 3-V lithium-ion battery with spinel materials LiNi0.5Mn1.5O4 and Li4Ti5O12. J. Power Sources 179, 351–356 (2008).

  18. 18.

    Kim, G. T. et al. Use of natural binders and ionic liquid electrolytes for greener and safer lithium-ion batteries. J. Power Sources 196, 2187–2194 (2011).

  19. 19.

    Hazama, T. et al. High-performance gel electrolytes with tetra-armed polymer network for Li ion batteries. J. Power Sources 286, 470–474 (2015).

  20. 20.

    MacFarlane, D. R. et al. Energy applications of ionic liquids. Energy Environ. Sci. 7, 232–250 (2014).

  21. 21.

    Fang, S. et al. A novel mixture of diethylene glycol diethylether and non-flammable methyl-nonafluorobutyl ether as a safe electrolyte for lithium ion batteries. J. Mater. Chem. A 3, 21159–21166 (2015).

  22. 22.

    Yong, T. et al. Organosilicon compounds containing nitrile and oligo(ethylene oxide) substituents as safe electrolytes for high-voltage lithium-ion batteries. J. Power Sources 254, 29–32 (2014).

  23. 23.

    Wang, J., Yong, T., Yang, J., Ouyang, C. & Zhang, L. Organosilicon functionalized glycerol carbonates as electrolytes for lithium-ion batteries. RSC Adv. 5, 17660–17666 (2015).

  24. 24.

    Wang, X., Yamada, C., Naito, H., Segami, G. & Kibe, K. High-concentration trimethyl phosphate-based nonflammable electrolytes with improved charge–discharge performance of a graphite anode for lithium-ion cells. J. Electrochem. Soc. 153, A135 (2006).

  25. 25.

    Zeng, Z. et al. Safer lithium ion batteries based on nonflammable electrolyte. J. Power Sources 279, 6–12 (2015).

  26. 26.

    Nakagawa, H. et al. Electrochemical Raman study of edge plane graphite negative-electrodes in electrolytes containing trialkyl phosphoric ester. J. Power Sources 212, 148–153 (2012).

  27. 27.

    Feng, J., Ma, P., Yang, H. & Lu, L. Understanding the interactions of phosphonate-based flame-retarding additives with graphitic anode for lithium ion batteries. Electrochim. Acta 114, 688–692 (2013).

  28. 28.

    Xu, K., Ding, M. S., Zhang, S., Allen, J. L. & Jow, T. R. An attempt to formulate nonflammable lithium ion electrolytes with alkyl phosphates and phosphazenes. J. Electrochem. Soc. 149, A622–A626 (2002).

  29. 29.

    Matsumoto, K. et al. Performance improvement of Li ion battery with non-flammable TMP mixed electrolyte by optimization of lithium salt concentration and SEI preformation technique on graphite anode. J. Electrochem. Soc. 161, A831–A834 (2014).

  30. 30.

    Yamada, Y. & Yamada, A. Superconcentrated electrolytes for lithium batteries. J. Electrochem. Soc. 162, A2406–A2423 (2015).

  31. 31.

    Zheng, J. et al. Research progress towards understanding the unique interfaces between concentrated electrolytes and electrodes for energy storage applications. Adv. Sci. 4, 1700032 (2017).

  32. 32.

    Shiga, T., Kato, Y., Kondo, H. & Okuda, C. Self-extinguishing electrolytes using fluorinated alkyl phosphates for lithium batteries. J. Mater. Chem. A 5, 5156–5162 (2017).

  33. 33.

    Wang, J. et al. Fire-extinguishing organic electrolytes for safe batteries. Nat. Energy 3, 22–29 (2018).

  34. 34.

    Shuru, C. et al. High-voltage lithium-metal batteries enabled by localized high-concentration electrolytes. Adv. Mater. 30, 1870143 (2018).

  35. 35.

    Yamada, Y., Koyama, Y., Abe, T. & Ogumi, Z. Correlation between charge−discharge behavior of graphite and solvation structure of the lithium ion in propylene carbonate-containing electrolytes. J. Phys. Chem. C. 113, 8948–8953 (2009).

  36. 36.

    Suo, L., Hu, Y.-S., Li, H., Armand, M. & Chen, L. A new class of solvent-in-salt electrolyte for high-energy rechargeable metallic lithium batteries. Nat. Commun. 4, 2513–2519 (2013).

  37. 37.

    Yamada, Y. et al. Unusual stability of acetonitrile-based superconcentrated electrolytes for fast-charging lithium-ion batteries. J. Am. Chem. Soc. 136, 5039–5046 (2014).

  38. 38.

    Suo, L. et al. ‘Water-in-salt’ electrolyte enables high-voltage aqueous lithium-ion chemistries. Science 350, 938–943 (2015).

  39. 39.

    Haregewoin, A. M., Wotango, A. S. & Hwang, B. J. Electrolyte additives for lithium ion battery electrodes: progress and perspectives. Energy Environ. Sci. 9, 1955–1988 (2016).

  40. 40.

    Ning, G., Haran, B. & Popov, B. N. Capacity fade study of lithium-ion batteries cycled at high discharge rates. J. Power Sources 117, 160–169 (2003).

  41. 41.

    Profatilova, I. A., Kim, S.-S. & Choi, N.-S. Enhanced thermal properties of the solid electrolyte interphase formed on graphite in an electrolyte with fluoroethylene carbonate. Electrochim. Acta 54, 4445–4450 (2009).

  42. 42.

    Xu, K., Lee, U., Zhang, S., Wood, M. & Jow, T. R. Chemical analysis of graphite/electrolyte interface formed in LiBOB-based electrolytes. Electrochem. Solid-State Lett. 6, A144–A148 (2003).

  43. 43.

    Ji, W. et al. Building thermally stable Li-ion batteries using a temperature-responsive cathode. J. Mater. Chem. A 4, 11239–11246 (2016).

  44. 44.

    Liu, Y. et al. Making Li-metal electrodes rechargeable by controlling the dendrite growth direction. Nat. Energy 2, 17083 (2017).

  45. 45.

    Qian, J. et al. High rate and stable cycling of lithium metal anode. Nat. Commun. 6, 6362–6371 (2015).

  46. 46.

    Hernandez-Rivera, S. P. et al. Vibrational spectroscopy of chemical agents simulants, degradation products of chemical agents and toxic industrial compounds. Int. J. High. Speed Electron. Syst. 17, 827–843 (2007).

  47. 47.

    Beran, M., Příhoda, J., Žák, Z. & Černík, M. A new route to the syntheses of alkali metal bis(fluorosulfuryl)imides: crystal structure of LiN(SO2F)2. Polyhedron 25, 1292–1298 (2006).

  48. 48.

    Pregosin, P. S., Kumar, P. G. A. & Fernández, I. Pulsed gradient spin−echo (PGSE) diffusion and 1H,19F heteronuclear overhauser spectroscopy (HOESY) NMR methods in inorganic and organometallic chemistry: something old and something new. Chem. Rev. 105, 2977–2998 (2005).

  49. 49.

    Deng, Z. & Irish, D. E. Raman spectral studies of ion association and solvation in solutions of LiAsF6–acetone. J. Chem. Soc. Faraday Trans. 88, 2891–2896 (1992).

  50. 50.

    Stejskal, E. O. & Tanner, J. E. Spin diffusion measurements: spin echoes in the presence of a time-dependent field gradient. J. Chem. Phys. 42, 288–292 (1965).

  51. 51.

    Te Velde, G. et al. Chemistry with ADF. J. Comput. Chem. 22, 931–967 (2001).

  52. 52.

    Becke, A. D. Density-functional thermochemistry. III. The role of exact exchange. J. Chem. Phy. 98, 5648–5652 (1993).

Download references

Acknowledgements

The main idea of the paper was jointly developed by Wuhan University and Pacific Northwest National Laboratory (PNNL), with support from the US Department of Energy, Office of Science, Basic Energy Sciences, Division of Materials Sciences and Engineering, under award KC020105-FWP12152 and by the National Key Research Program of China (no. 2016YFB0100200) and the National Nature Science Foundation of China (nos. 21673165 and 21333007). The NMR testing was supported by the US Department of Energy, Office of Science, Basic Energy Sciences, Division of Materials Sciences and Engineering, under award KC020105-FWP12152. Simulations were performed using PNNL Institutional Computing Resources. PNNL is operated by Battelle for the US Department of Energy under contract no. DE-AC05-76RL01830. The electrochemical study was supported by Wuhan University, and supported by the National Key Research Program of China (no. 2016YFB0100200) and the National Nature Science Foundation of China (nos. 21673165 and 21333007). The preparation of 18650 cells was supported by EVE Energy Co. Ltd. The safety tests were supported by the staff of the Battery Safety Laboratory of BST Power (Shenzhen) Limited.

Author information

Affiliations

  1. College of Chemistry and Molecular Sciences, Hubei Key Laboratory of Electrochemical Power Sources, Wuhan University, Wuhan, China

    • Ziqi Zeng
    • , Xiaoyu Jiang
    • , Yuliang Cao
    • , Xinping Ai
    •  & Hanxi Yang
  2. Pacific Northwest National Laboratory, Richland, WA, USA

    • Vijayakumar Murugesan
    • , Kee Sung Han
    • , Ji-Guang Zhang
    • , Maria L. Sushko
    •  & Jun Liu
  3. State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, China

    • Lifen Xiao

Authors

  1. Search for Ziqi Zeng in:

  2. Search for Vijayakumar Murugesan in:

  3. Search for Kee Sung Han in:

  4. Search for Xiaoyu Jiang in:

  5. Search for Yuliang Cao in:

  6. Search for Lifen Xiao in:

  7. Search for Xinping Ai in:

  8. Search for Hanxi Yang in:

  9. Search for Ji-Guang Zhang in:

  10. Search for Maria L. Sushko in:

  11. Search for Jun Liu in:

Contributions

J.L., L.X. and Y.C. conceived the idea of the high-molar-ratio non-flammable electrolyte. Z.Z. and X.J. synthesized a series of non-flammable electrolytes and carried out the electrochemical measurements of the electrode materials and 18650 cells. K.S.H. and L.X. conducted NMR measurements. V.M. conducted DFT calculations. Z.Z., L.X., Y.C. and J.L. participated in the manuscript writing. X.A., H.Y., J.-G.Z. and M.L.S. provided advice and helped in editing the manuscript. All authors participated in the analysis of the experimental data, the discussions of the results and the preparation of the paper.

Competing interests

The authors declare no competing interests.

Corresponding authors

Correspondence to Yuliang Cao or Lifen Xiao or Jun Liu.

Supplementary information

  1. Supplementary Information

    Supplementary Table 1, Supplementary Figures 1–11, Supplementary Discussion, Supplementary References

About this article

Publication history

Received

Accepted

Published

DOI

https://doi.org/10.1038/s41560-018-0196-y