Introduction

The amide bond is one of the most common functional and structural elements, as the backbones of all peptides and proteins and almost every second drug are composed of amide bonds. Thus, the construction of amide bonds is fundamental to organic synthesis as it provides access to the backbone of pharmaceuticals, agrochemicals, natural products, peptides and proteins and functional materials (Fig. 1a). Recent data mining charting the amine–acid cross-coupling space revealed that there are numerous opportunities for reaction discovery1. Nonetheless, the great majority of amide groups are formed by the coupling of a nucleophilic amine and an electrophilic carboxylic acid building block. Notably, the direct coupling of amines and carboxylic acid is unfavorable, hence requires an activated ester which is formed by aggressive, expensive or waste-full reagents (Fig. 1b)2. Far less common ways to form amides involve, for example, oxidative and radical-based methods or the alkylation of nitriles to yield nitrilium ions with in situ hydrolysis3,4. Based on our longstanding interest in isocyanide chemistry, we asked ourselves to what degree the known boundaries of isocyanide nucleophilicity can be pushed to exploit new and synthetically useful reactivities. The isocyanide has both a σ-type C-centered HOMO and a C-centered π-type LUMO which accounts for the unusual reactivity of isocyanides (Fig. 1c)5. An example of this is its ability to act both as a nucleophile and an electrophile in the α-addition of a nucleophile and an electrophile onto the same functional group atom, the isocyanide-C, which is a quite unusual feature in organic chemistry, and accounts for many reactions of isocyanides such as multicomponent reactions and heterocycle syntheses6,7,8. Due to their unusual C-only centered reactivity, isocyanides were also coined stereochemical chameleons9.

Fig. 1: Background and motivation for novel amide formation.
figure 1

a Amides are ubiquitous in nature: autoimmune disease drug Avacopan and transcription factor hypoxia-inducible factors HIF-3α (PDB-ID 7V7W) with natural ligand oleoylethanolamide. b The classical approach to amide formation involves stoichiometric activation/coupling of carboxylic acid and amine. c Frontier orbitals of the isocyanide to rationalize chameleonic behavior as a C-nucleophile and C-electrophile. d The novel multicomponent reaction amide synthesis involves an SN2-promoted C-C coupling reaction, followed by hydrolysis of the nitrilium ion.

Full size image

Isocyanides in multicomponent reaction chemistry (IMCR) is probably the most famous application. It involves the nucleophilic attack to the electrophilic oxo and imine-C and the subsequent addition of an internal or external nucleophile onto the nitrilium-C, followed by a rearrangement and is well established in the Passerini and Ugi reactions7,10. Motivated by the powerful IMCR, which is based on the unusual reactivity of the isocyanide-C, we designed a novel multicomponent reaction (Fig. 1d). Our design involves an initial nucleophilic attack of the isocyanide on an alkyl halide in the sense of a nucleophilic substitution reaction (SN2); the intermediate nitrilium ion then reacts with water to give the stable amide species. Conceptually and experimentally, the reaction design is not obvious, and potential issues preventing the planned reaction outcome could involve i.a. insufficient isocyanide nucleophilicity, premature hydrolysis of the isocyanide or the alkyl halide.

Results

Reaction optimizations

The SN2 reaction is known to be very sensitive to the substrate structures, as well as reaction conditions11,12,13. While initial attempts to run the new reaction were promising by mass spectrometry analysis, the yields were far from being synthetically useful. Taking into account the established condition knowledge of the SN2 reaction, we first interrogated stoichiometry and ratio of the reactants, temperature, temperature source, and solvents employing high-throughput experimentation (HTE)14,15. HTE methods used were parallel reactions in 96, 48, and 24-well format, parallel heating in a metal block, parallel TLC analytics, and stacked injection into SFC. The methods are described in more detail in the Supplementary Information. We chose the model reaction of p-chloro benzyl isocyanide with benzyl bromide, a good electrophile in SN2 reactions and good visibility of educts and product in TLC (Fig. 2). Next, we investigated the result of additives in the SN2 reactions. Biphasic phase transfer catalysts (PTC) were often used in SN2 reactions to increase yields and conversion16. We screened 16 different common PTCs (Supplementary Information). The addition of iodine salts is often described as advantageous in the SN2 reactions as it converts the less reactive chloride-leaving groups into the more reactive iodo-leaving group. After thorough optimization of all parameters, the optimized conditions involved the microwave heating at 105 °C for 3 h of 1:2 ratio of isocyanide, alkyl halide, 20 mol% KI catalyst, and 1 equivalent of water in acetonitrile in the presence of 2 equivalent of the inorganic base K2CO3 (Fig. 2).

Fig. 2: Optimization of reaction parameter using high-throughput experimentation.
figure 2

Scheme of the model reaction, parallel heating in a metal block, and stagged HPLC injections.

Full size image

Scope and limitations

The substrate scope for this reaction is very broad (Figs. 3–5). With the optimized conditions in hand, we interrogated the scope of the halide with respect to the leaving group, sterical bulkiness, electronic nature and building block diversity. Among the halide leaving group, chloride, bromide and iodide reacted well according to the well-established leaving group trend I>Br>Cl. To test the functional group tolerance, we successfully reacted 21 different alkyl halides with adamantyl isocyanide on a mmol scale (Fig. 3). Adamantyl isocyanide is a solid, non-smelling, bench-stable powder that has been synthesized recently on a mol scale17. A variety of alkyl halides with different functionalities were well tolerated. The small methyl group can be easily introduced (21a), whereas bulky alkyl groups or alkyl groups with β-branching do not react. Long-chain alkyl groups can be introduced (17a), also with a terminal phthalic amide amine protecting group (12a), whereas Boc-protecting groups were found to be not stable under microwave conditions (Supplementary Information). For several alkylation products, single crystals revealed X-ray structures that support the structural identity (4a, 8a, 12a, 16a). Allyl (5a) and benzyl (1a, 3a, 4a, 6a, 13a) groups react well due to the conjugated nature of the pentagonal bipyramidal transition state, as suggested by the classical SN2 literature. Specifically to mention, is bis benzyl chloride derived 13a, which can be mono alkylated in 32% yield and can be potentially further reacted through the unreacted benzyl chloride. Also, the nature of the heterocyclic structures that could be reacted is quite diverse, including benzimidazole (7a), pyrazole (8a), triazole (9a), phthalimide (12a), coumarin (11a), thiophene (15a), and quinoline (19a). Especially to mention are 15a and 18a, which are formed from bifunctional (hetero)aromatic benzyl chloride benzaldehydes. The aldehyde functionality can be further derivatized, as will be shown below. We also found substrates that did not give the expected products or gave very low yields (<30%, Supplementary Information).

Fig. 3: Scope of the halide electrophile with adamantyl isocyanide as the fixed component.
figure 3

Several stick presentations of X-ray structures and their CCDC codes are given.

Full size image
Fig. 4: Scope of isocyanide nucleophile with methyl iodide as the fixed component.
figure 4

The figure encapsulates the versatility of this reaction by showcasing the successful reaction of 20 distinct isocyanides with methyl iodide, yielding satisfactory to good yields.

Full size image
Fig. 5: Mixed reaction examples of the isocyanide nucleophile with alkyl halide.
figure 5

The figure presents a diverse array of mixed reaction examples showcasing the dynamic interplay between the isocyanide nucleophile and the alkyl halide. These illustrative instances collectively increase the versatility and application potential of the reaction.

Full size image

The evaluation of the isocyanides also revealed a broad scope (Fig. 4). We reacted 20 different isocyanides with methyl iodide in satisfactory to good yields. Benzylic (23a, 24a, 25a, 29a, 30a), aromatic (31a, 33a, 34a, 35a, 36a, 37a), aliphatic (27a, 42a) and heteroaromatic (26a, 28a, 32a) isocyanides all worked well. When isocyanides with a basic side chain were reacted, we observed the double alkylation and a quaternary amine salt formation (38a, 39a). Noteworthy, also α-amino acid isocyanides (40a, 41a) worked well.

We performed a number of mixed examples to further elaborate the scope and usefulness of the reaction (Fig. 5). Highly substituted 47a is especially noteworthy, as it comprises a combination of a sterically hindered α,α-disubstituted cyclopropyl benzyl isocyanide with a bifunctional 4-formylbenzyl chloride. The new method is also applicable to the facile synthesis of diverse lipid derivatives (56a, 60a, 61a), which could be of interest in lipidomics applications. Bulky isocyanides (47a, 50a, 54a) and phenyl isocyanides with bulky o-substitutents (43a, 51a, 52a, 53a, 55a) reacted nicely. Amide 55a is accessible with a free compatible benzylic hydroxyl group. 4-Methylpentenoic acid (pyroterebic acid) ester or amides are common in biologically active isoprenoid compounds from plants. Compound 54a is a pyroterebic acid amide, and it comprises an unprecedented synthesis. Another example of the incorporation of an isoprenoid side chain (homo geranyl acid) is exemplified in 60a. It is conceivable that this methodology can be used to incorporate isotope labeled carboxy-C via the isocyanide. In summary, complex structures can be accessed from simple available building blocks in one step.

Scaling and late-stage functionalization

To further stress the reaction performance, we evaluated the robustness of this reaction toward pharmaceutical late-stage diversification on an actual drug18. Late-stage-functionalization is a drug discovery technique to selectively derivatize already complex ‘drug-like’ molecules and is used to further improve their properties18. Phenoxybenzamine (dibenzyline) is an alpha blocker used for the treatment of hypertension. To establish the usefulness of our novel SN2 reaction, we reacted dibenzyline with adamantyl isocyanide and were able to isolate the expected amide product 22a in 40% yield (Fig. 6).

Fig. 6: Late-stage diversification, scale-up and some follow-up chemistries.
figure 6

Robustness was validated through pharmaceutical late-stage diversification on phenoxybenzamine (dibenzyline), yielding amide product 22a. Scale-up demonstrated isocyanide-to-amide transformation yielding product in Ugi-4CR, GBB-3CR, and Ugi tetrazole reactions, showcasing rapid complexity increase.

Full size image

A gram-scale application of the isocyanide to amide transformation further underscores the robustness of the reaction. We performed the synthesis of thiophene carbaldehyde with fair yields. By reacting 1.59 g of bifunctional 5-(chloromethyl)thiophene-2-carbaldehyde with 1.61 g of adamantyl isocyanide on a 10 mmol scale (Fig. 6), we obtained product 15a in a 51% yield (1.57 g). The aldehyde group can be further functionalized to create complex molecules with just a few steps. For this purpose, we used multicomponent reactions (MCR) for further derivatization of the thiophene carbaldehyde7,10,19. Compound 15a is of interest to test further reactivity due to its unprotected aldehyde group based on the functional group compatibility of the reaction. Thus, we used 15a, each in a Ugi-4CR, a Groebke Blackburn Bienaymé (GBB‐3CR) reaction, and a Ugi tetrazole reaction to exemplify the rapid increase of molecular complexity (Fig. 6). The Ugi-4CR product 1b was obtained in 72% yield in one step from easily available building blocks. Noteworthy, an alkynyl amide is introduced in a straightforward mild manner. Electrophilic alkynyl amides are often used in covalent drug discovery targeting cysteines, and an alkynylamide substructure can be found in the FDA-approved Acalabrutinib Bruton’s tyrosine kinase targeting drug20. Next, we investigated aldehyde 15a as a substrate in the GBB‐3CR reaction. The GBB-3CR is a popular method to synthesize highly substituted bicyclic imidazo heterocycles, which already have proven their value as drugs and candidates21. Thus, we reacted 2-aminopyridine with aldehyde 15a and cyclohexyl isocyanide in a GBB-3CR under microwave conditions in methanol to obtain complex heterocycle 1c in 36% yield. Lastly, we performed a Ugi tetrazol reaction employing aldehyde 15a. Tetrazoles are often used as advantageous carboxylic acid bioisosteres and can be broadly obtained by multicomponent reaction chemistry19.

In summary, the new SN2 reaction turned out to be scalable, useful in late-stage-functionalization and can yield highly interesting intermediates for allowing further chemistries to increase structural diversity in a quasi-exponential complexity increase, in just three steps: isocyanide synthesis, SN2 reaction, further aldehyde reaction.

Mechanism and chemical space

Our preliminary observations support an SN2-type mechanism. Accordingly, the nucleophile isocyanide attacks from the backside to form a trigonal bipyramidal transitions state I and kicks out the leaving halogen anion. The intermediately formed nitrilium ion II undergoes water attack on the isocyanide-C III and, through tautomerization, reveals the final amide IV upon hydrolysis.

Several lines of evidence, including kinetic analysis (Supplementary Information), support an SN2 mechanism: sterically hindered substrates such as neopentyl iodide or isobutylbromide do not give any reaction product; the reaction is strongly solvent dependent and runs well in the polar solvent DMF which are believed to stabilize the transitions state, but not in apolar toluene or protic methanol; the reaction rate depends on the nature of the nucleofuge as reported in the SN2 literature I>Br>Cl (Supplementary Information). To exclude a possible radical mechanism, we performed the reaction in the presence of 2x stoichiometric amounts of the radical quencher TEMPO and did not find any difference in the reactivity (Supplementary Information)22,23. While running the reaction in the absence of water and direct injection in the mass spectrometer, we could observe a strong peak corresponding to the bromo nitrilium ion (see below). Another hallmark of the SN2 mechanism is the stereochemical inversion of the electrophilic carbon center called Walden inversion. To investigate the stereochemical inversion, we conducted experiments on chiral halides (Fig. 7). Unfortunately, the (S)-2-bromobutyric acid as the halide source did not yield the desired results, probably due to the incompatibility of the free carboxylic acid. Thus, we prepared the corresponding methyl ester. To prevent any further racemization of the ester, we evaporated all the solvents and utilized the crude methyl ester of (S)-2-bromobutyric acid for the subsequent SN2 reaction with adamantly isocyanide under standard conditions. The resulting product, 62, was isolated in 22% yield. To assess the enantiomeric ratios, we employed chiral supercritical fluid chromatography mass spectrometry (SFC-MS) on the product. We found that two enantiomers of 62 were formed in a 27:73 ratio, which is in accordance with an SN2 mechanism (Supplementary Information). While one would expect full inversion in an SN2 reaction, the ~2:1 enantiomeric ratio could be explained twofold; the product is racemization prone due to the two CH flanking carbonyl substituents and the basic reaction conditions, or the reaction is running according to a mixed mechanism involving direct inversion of the bromide substrate or intermediate formation of the iodide substrate and therefor double inversion (retention). The exact nature of the mechanism needs additional future investigation.

Fig. 7: SN2 Mechanism investigation for stereochemical inversion.
figure 7

Stereoselective reaction of methyl ester of (S)-2-bromobutyricacid methyl ester with adamantly isocyanide under standard SN2 reaction condition.

Full size image

In conclusion, there is strong evidence that the reactions run according to an SN2 mechanism (Fig. 8a). In the classical amide coupling approach, the carbonyl is a carbocation synthon, while in the SN2 approach the rare amide carbanion synthon is the result of an Umpolung (Fig. 8d). The isocyanide is commonly synthesized from its primary amine precursor (Ugi method: formylation > dehydration or Hoffman reaction)10,24. Alternatively, isocyanide can be obtained by reductive amidation with formamide (Leukart-Wallach) and dehydration from an aldehyde or ketone precursor (Fig. 8c)25,26. This SN2 reaction involves coupling a primary amine with a C1 synthon derived from chloroform (Hoffmann) or formic acid (Ugi) with an alkyl halide or coupling an aldehyde/ketone with an NC synthon derived from formamide (Leukart-Wallach) with an alkyl halide (Fig. 8c). The wide availability of primary amines, aldehydes, ketones, and alkyl halides makes this reaction highly valuable for synthesis. Notably, unlike classical SN2 reactions that use simple nucleophiles (e.g., halides, CN-, thio- or alcoholates), the described SN2 reaction utilizes the structural diversity and complexity of isocyanides (Fig. 5). This is leading to a strong increase in structural complexity upon coupling with alkyl halides (e.g., 60a). Next, we asked the question whether the new reaction can access a chemical space different from the classical amide coupling. For this, we investigated the commercial availability of the corresponding carboxylic acid needed to form the target amides and compared them with the corresponding halide (Supplementary Information). Surprisingly, in 52% of cases, the corresponding carboxylic acids were not commercially available at all. Noteworthy, in the remaining 48%, the carboxylic acid was, on average, 2.4 times more expensive than the corresponding chloride. It turned out that the chemical space accessible by the two orthogonal amide syntheses is very different, and only 12% are overlapping (i.e., can be synthesized by both methods). In conclusion, our herein-reported novel SN2 reaction is of high synthetic value as it allows access to a chemical space that otherwise can only accessed through time-consuming and lengthy multistep syntheses and leads to a strong increase in molecular complexity, otherwise uncommon in SN2 reactions.

Fig. 8: Proposed mechanism and evidence, RNC synthon, retrosynthetic valuation, and comparison with the classical amide coupling.
figure 8

a Proposed mechanism and MS evidence of an imidoyl bromide intermediate (b). c Most popular and efficient access to isocyanides by two different synthesis pathways. d Comparison of the classical and the SN2-based amide formation and the amide carbanion isocyanide synthon. e Venn diagram for chemical space analysis of the classical and SN2-based amide formation and its overlap.

Full size image

Discussion

Arguably, the amide bond formation is among the most important reactions in organic chemistry. The value of the amide group in organic chemistry cannot be overstated. It is on top of the most frequent functional groups occurring in bioactive molecules described in medicinal chemistry literature27. More than 1/2 of the marketed drugs contain at least one amide group. Thus, the amide bond formation is the most practiced reaction in medicinal chemistry and one of the most frequently used in process chemistry2. While the classical amide coupling is a powerful reaction, there are many more hypothetical ways in which amides can be formed, with each new transformation imprinting a unique accessibility fingerprint on the product. The discovery of novel reactivities is key to leverage untapped chemical space and to broaden the toolbox used in medicinal and other chemistries28, exemplified by a recently described copper-catalyzed deaminative esterification with a broad scope29. The use of isocyanides in SN2 reactions is such an example of unprecedented reactivity giving access to unusual, otherwise difficult-to-synthesize amides. Classically the amide group is constructed from a carboxylic acid derivative and a primary or secondary amine using specific activation conditions, and a plethora of aggressive, expensive, and waste-full coupling reagents have been described2. Therefore, sustainable and alternative amidations have emerged as an important synthetic strategy to exploit the commercial and natural prevalence of the amide functional group30,31, leading us to consider the transformation of an isocyanide into an amide by alkylation and hydrolysis. The reaction was specifically designed to complement the popular amide coupling reaction.

Here, we show for the first time that isocyanides can be alkylated by an SN2 mechanism through a nitrilium ion with concomitant hydrolysis to the corresponding amide. In this novel 3-component reaction, the isocyanide can be described as a Umpolung-derived rare amide carbanion synthon. The use of isocyanides as acyl anion equivalents provides a conceptually innovative approach to amide synthesis. As isocyanides are most commonly derived from either primary amines or aldehydes or ketones, the new reaction connects a primary amine via a formyl-C to an alkyl halide or, in the second case, an aldehyde or ketone carbonyl is connected through the formamide-C to an alkyl halide. The position of the amide group in the classical amide coupling of amines and carboxylic acids and the herein-described isocyanide/alkylation-derived amides are different. By repurposing halide building blocks as amides instead of relying on the traditional amide coupling method, a subtle but significant transformation occurs in terms of synthetic accessibility. Attempting to synthesize the same molecules by the two orthogonal methods, large-scale data analysis of educts reveals a great disadvantage of the classical method since the required carboxylic acid building blocks are more difficult to access, not available at all and more expensive than the corresponding alkyl halides by an average factor of 2.4 (Supplementary Information). We also performed a survey of commercial availability of the required building blocks from a commercial vendor catalog (Fig. 8e, Supplementary Information), which revealed that 3.8 million amides are accessible by the classical method and 4.2 million by the new method, with only 1 million matched molecular pairs between the two sets. A chemoinformatic analysis of commercial building blocks demonstrates that by utilizing halides and primary amine-, aldehyde-, or ketone-derived isocyanides, our method more than doubles the available amidation chemical space. There is minimal overlap of chemical space compared to the classical amide coupling, demonstrating that a halide-isocyanide amidation can provide broad access to new and complementary structures. Repurposing of halide and isocyanide building blocks provides an enormous opportunity to expand the accessible chemical space or amides because halide and amine or aldehyde/ketone feedstocks are typically low cost and available in high diversity. A halide-isocyanide amidation would therefore leverage the abundance of one popular building block and easily access isocyanides from other popular building blocks. Collectively, these analyses quantify the value that a halide-isocyanide amidation would provide as an addition to the synthetic toolbox. High-throughput experimentation was used to develop the reaction, along with classic scope studies, both of which demonstrated robust performance against many pairs of reactants. The new reaction can be carried out under practical, mild conditions with yields ranging from good to moderate to poor, depending on the structure of the reactants. The functional group compatibility of the reaction is high. Late-stage functionalization of a drug is exercised. Alkyl halides are very frequently encountered in pharmaceutical research, so harnessing this functional group would also provide plenty of opportunities for late-stage diversification. Upscaling of the reaction to gram scale has been shown. Complex, otherwise difficult-to-access compound classes such as lipids, isoprenoids or functionalized amino acids can be synthesized by this method. Electrophilic alkyl halides are a cheap, abundant feedstock and are commercially available in high diversity, making them a valuable starting material for amide synthesis. Similarly, isocyanides are accessible in two steps from abundant primary amines or ketones or aldehydes. In conclusion, we have successfully developed an efficient new way to form amides by reacting isocyanides, alkyl halides, and water in a three-component fashion. Our innovative amide synthesis will be of potential use in the synthesis and discovery of novel bioactive molecules. It is beyond current amide bond forming methods, and with its unusual synthon features, exponential complexity increase, and its wide scope, it will allow us to scout novel chemical space hitherto inaccessible32. It is conceivable that other nucleophiles than water can also react with the intermediate-formed nitrilium ion in this new multicomponent reaction, and work is currently underway in our laboratory to broaden the range of nucleophiles.

Methods

General procedure for compound 1a-61a

To a microwave vial equipped with a magnetic stir bar containing isocyanide (1.0 mmol), alkyl methyl halide (2.0 mmol), potassium iodide (0.2 mmol), potassium carbonate (2.0 mmol), H2O (1.0 mmol) and acetonitrile (0.5 M) were added. The reaction vessel was sealed and irradiated in the cavity of the microwave reactor at the set temperature of 105 °C for 3 h. Upon completion of the reaction, the vial was cooled to room temperature. The reaction mixture was diluted with dichloromethane 5 ml and filtered off to remove the inorganic solids. Solvents were evaporated under vacuum to give a crude reaction product. The crude product was purified by flash chromatography on silica gel to obtain the pure product.

Synthesis of compound 1b

The mixture of aldehyde (15a, 1.0 mmol), tert-butyl isocyanide (1.0 mmol), aniline (1.0 mmol) and but-2-ynoic acid (1.0 mmol) in 1.0 ml of methanol was stirring under room temperature for 12 h. The crude product was purified by flash chromatography on silica gel (petroleum ether/ethyl acetate, 3:1) to get product 1b (392 mg, 72%).

Synthesis of compound 1c

To a microwave vial equipped with a magnetic stir bar containing pyridine-2-amine (1.0 mmol), cyclohexyl isocyanide (1.0 mmol), aldehyde (15a, 1.0 mmol), methanol (1.0 ml) and scandium triflate (0.1 mmol) were added. The reaction vessel was sealed and irradiated in the cavity of the microwave reactor at the set temperature of 100 °C for 2 h. Upon completion of the reaction, the vial was cooled with a stream of air. The resulting reaction mixture was diluted with ethyl acetate (50 ml), thoroughly washed with 1 M HCl (2 × 50 ml) and saturated Na2CO3 (50 ml) aqueous solutions, dried over Na2SO4 and concentrated under reduced pressure. The crude product was dissolved in ethyl acetate (5 ml) and subjected to flash chromatography with silica (25 g) and ethyl acetate/pentane (3:7) as eluent to give pure 1c (175 mg, 36%).

Synthesis of compound 1d

The mixture of aldehyde (15a, 1.0 mmol), isocyanide (1.0 mmol), aniline (1.0 mmol) and TMSN3 (1.0 mmol) in 1.0 ml of methanol was stirred under room temperature for 12 h. The crude product was purified by chromatography on silica gel (petroleum ether/ethyl acetate, 3:1) to get product 1d (221 mg, 39%).

General procedure for the control experiment ruling out a radical mechanism

To a microwave vial equipped with a magnetic stir bar containing adamantyl isocyanide (1.0 mmol), 2-(bromomethyl)-1,3-dichlorobenzene (1.0 mmol), potassium iodide (0.2 mmol), potassium carbonate (2.0 mmol), TEMPO (2.0 mmol), H2O (1.0 mmol), and acetonitrile (2.0 ml) were added. The reaction vessel was sealed and irradiated in the cavity of the microwave reactor at the set temperature of 105 °C for 5 h. Upon completion of the reaction, the vial was cooled at room temperature. The crude product was purified by chromatography on silica gel (petroleum ether/ ethyl acetate, 3:1) to get product 1a (198 mg, 59%).