Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Additive rheology of complex granular flows


Granular flows are omnipresent in nature and industrial processes, but their rheological properties such as apparent friction and packing fraction are still elusive when inertial, cohesive and viscous interactions occur between particles in addition to frictional and elastic forces. Here we report on extensive particle dynamics simulations of such complex flows for a model granular system composed of perfectly rigid particles. We show that, when the apparent friction and packing fraction are normalized by their cohesion-dependent quasistatic values, they are governed by a single dimensionless number that, by virtue of stress additivity, accounts for all interactions. We also find that this dimensionless parameter, as a generalized inertial number, describes the texture variables such as the bond network connectivity and anisotropy. Encompassing various stress sources, this unified framework considerably simplifies and extends the modeling scope for granular dynamics, with potential applications to powder technology and natural flows.


The crucial role of granular flows in nature (landslides, debris avalanches, slope failure)1,2,3,4,5,6,7,8 and industrial processes (handling powders and granulates, compaction, additive manufacturing)9,10,11,12,13 has been at the focus cross-disciplinary research for more than thirty years14,15. Recent progress in theoretical understanding of granular flows has been mainly inspired by collective effects such as force chains and jamming16,17,18,19,20,21,22,23,24,25, and by searching for relevant dimensionless control parameters26,27,28,29,30,31,32,33,34,35,36.

Basic model granular media are composed of rigid particles with frictional contact interactions and, in contrast to interacting particles at the atomic scale or in colloids, rigid frictional particles are devoid of an intrinsic stress or time scale. The relevant scales are therefore set either externally, such as those arising from a confining pressure σp, or by collective particle motions during flow involving an inertial (or kinetic) pressure \({\sigma }_{i} \sim {\rho }_{s}{\langle d\rangle }^{2}{\dot{\gamma }}^{2}\), where ρs is the particle density, 〈d〉 is the mean particle diameter, and \(\dot{\gamma }\) is the shear rate27,37. Hence, in the NPT statistical ensemble (with temperature T = 0 for a granular material), the apparent friction coefficient μ = σtσp, where σt is the shear stress, and the packing fraction Φ are expected to be uniquely dependent on the ratio I2 ≡ σiσp, which accounts for the competing effects of particle inertia and confinement. The dimensionless number I is the inertial number, defined as the ratio of two time scales (relaxation time \(\langle d\rangle {({\rho }_{s}/{\sigma }_{p})}^{1/2}\) under load vs. shear time \({\dot{\gamma }}^{-1}\)), and it was found to unify experimental and numerical data in different flow geometries26.

Most of time, however, the particle interactions are not purely frictional and involve characteristic forces that induce additional internal stresses. A well-known example is the cohesive contact force fc in fine powders. When a powder flows, the average action of the resulting cohesive stress σc ~ fcd2 is similar to a confining stress, tending to prevent from dilation during flow, to enhance the contact forces and to reduce the relaxation time under load32,38,39. As the stresses are additive, one may thus take the cohesive stress into account on the same footing as the confining pressure by replacing σp by a linear combination σn = σp + ασc, and therefore replacing I2 by \({I}_{c}^{2}\equiv {\sigma }_{i}/{\sigma }_{n}={I}^{2}/(1+\alpha \xi )\), where ξ = σcσp is the cohesion index, and α is a material-dependent parameter32. In the same way, in submerged granular flows, where the viscous drag force σv is present instead of cohesive stress, σi may be replaced by a linear combination σi + βσv, leading to a visco-inertial number \({I}_{v}^{2}\equiv ({\sigma }_{i}+\beta {\sigma }_{v})/{\sigma }_{p}={I}^{2}(1+\beta /St)\), where St ≡ σiσv is the Stokes number. In dense non-Newtonian suspensions, Iv is found to be the control parameter for both μ and Φ31,35.

The above examples lead to the conjecture that granular flows are fundamentally governed by a single dimensionless parameter combining arbitrary particle interactions by virtue of stress additivity and the role of each interaction with respect to the shear rate and confining pressure. In this paper, we address this interesting issue by simulating wet granular flows such as unsaturated soils and powders at high relative humidity. The liquid bridges between particles induce both capillary and viscous (lubrication) forces whose effects on the flow behavior, together with the confining and inertial stresses, will be quantified for a broad range of parameter values, which are generally difficult to access by means of experiments.

Our results convincingly demonstrate the above conjecture not only for the apparent friction and packing fraction but also for the microstructural variables as a function of a generalized inertial number accounting for the confining, inertial, cohesive and viscous stresses. The results provide also direct evidence for the role of cohesive interactions in dense suspensions when properly interpreted in terms of effective viscosities. This work sets therefore the foundation for a unified description of complex granular flows both encompassing and extending previous work.


Particle dynamics simulations and data collapse

We performed extensive 3D long-shear simulations of granular samples composed of nearly 20,000 spherical particles by means of a particle dynamics method and with a broad range of the values of liquid viscosity η, surface tension γs, confining stress σp and shear rate \(\dot{\gamma }\). Our results are based on the average values of the stress tensor, velocity fields, packing fraction and granular texture in steady flow of the particles in the simulation cell between the top and bottom walls with periodic boundary conditions in the other directions. Besides repulsive elastic force and friction force, the particle interactions include the approximate analytical expressions of the capillary force fc and viscous force fv acting between neighboring particles (see Methods section). The snapshots of Fig. 1 show the boundary conditions, compressive and tensile force chains, contact and non-contact forces (due to capillary bridges) and particle velocities in steady flow.

Fig. 1: Simulated system of wet spherical particles.

a Particles in the simulation cell composed of a rough immobile bottom wall, a rough top wall subjected to a constant confining stress σp and moving at constant horizontal velocity v, and with periodic boundary conditions along lateral directions, The particle colors are proportional to their diameters. b Snapshot of compressive (gray) and tensile (blue) force chains in a thin layer parallel to the flow plane. Line thickness is proportional to normal force. c A zoomed-in view of compressive and tensile force chains. d Snapshot of contact forces (violet) and non-contact capillary forces (green) in a thin window at the center of the flow plane. e A zoomed-in view of the particle velocity field.

Figure 2 displays the apparent friction coefficient μ and packing fraction Φ as a function of the inertial number I for all our 281 simulations. The confining pressure σp was varied in the range [15, 1000] Pa, the cohesion index ξ in the range [0, 3.0] (by varying γs or σp), the liquid viscosity η in the range [ηw, 800ηw], where ηw is the water viscosity, and the shear rate in the wide range [0.31, 10.6]s−1. As in dry flows27, μ increases and Φ declines with increasing I but with different values and at different rates depending on the viscosity and cohesion index. These differences are observed at both low values (quasi-static flow) and high values (inertial flow) of I, and the variability of μ and Φ with the variation of I is of the same order of magnitude as with the variation of viscous and cohesive parameters.

Fig. 2: Simulation results for friction and packing fraction.

Apparent friction coefficient μ (a) and packing fraction Φ (b) as a function of the inertial number I for different sets of system parameters. The data points are average values over the steady state, and the error bars represent their standard deviation in each simulation during steady-state flow. For each set of simulations, the symbols and their colors correspond to the parameters that are varied with their ranges, all other parameters being kept constant.

The issue is whether all these different values of apparent friction and packing fraction can be expressed as a collapsed function of a single dimensionless number combining surface tension, liquid viscosity, confining pressure and shear rate. In other words, can I be replaced by a more general inertial number Im that simultaneously accounts for the capillary, viscous and inertial forces? This is indeed what we observe in Fig. 3, displaying all the data points of Fig. 2 as a function of a modified inertial number defined by

$${I}_{m}=I{\left(\frac{1+\beta /St}{1+\alpha \xi }\right)}^{1/2},$$

The values of μ and Φ are normalized by μc and Φc, respectively, which design their quasi-static values (Im → 0) and vary linearly with ξ, as shown in the two insets to Fig. 3. The parameter values α 0.062 and β 0.075 were determined from two series of simulations but we see that they lead to data collapse for all other simulations, including those of dry cohesionless flows. This means that α and β depend only on the material parameters (particle shape and size distribution, friction coefficient between particles) and not on the cohesive and viscous interactions.

Fig. 3: Rescaled simulation data.

Normalized apparent friction coefficient μμc (a) and normalized packing fraction ϕϕc (b) as a function of the generalized inertial number Im defined by Eq. (1) with α 0.062 and β 0.075. The error bars represent the standard deviation of the data over the steady-state flow. The symbols are the same as those in Fig. 2. The black-solid lines are the analytical expressions of Eqs. (6) and (7). The insets show the evolution of quasistatic values μc and Φc of the apparent friction coefficient and packing fraction, respectively, with the cohesion index ξ, and their linear fits (blue-solid lines).

Visco-cohesive inertial number

The physical argument behind the definition of Im is the following. There are four characteristic stresses of different origins governing the flow: confining stress σp, inertial stress σi, viscous stress σv, and capillary stress σc. The key variable for inertial flows is the shear rate. We thus distinguish the characteristic stresses that depend on the shear rate, i.e., σi and σv, from those that are independent of the shear rate, i.e., σp and σc. By virtue of stress additivity, the total shear-dependent stress is a linear combination σi + βσv of the former, and the total shear-independent stress is a linear combination σp + ασc of the latter. Hence, the flow variables (apparent friction coefficient and packing fraction) are expected to depend on the ratio (σi + βσv) ∕ (σp + ασc), which simply represents the relative magnitude of the two groups of stresses. We define the generalized inertial number Im as the square root of this ratio, leading to the expression (1) by setting \(I={({\sigma }_{i}/{\sigma }_{p})}^{1/2}\), ξ = σc ∕ σp and St = σi ∕ σv.

These primary dimensionless parameters can be evaluated from the system control parameters. The order of magnitude of the viscous stress σv is conveniently evaluated by replacing the average relative velocity \(\vartheta \sim \dot{\gamma }\langle d\rangle\) induced by shearing in Eq. (15) and considering the dissipated power per unit volume fvδrupt ∕ 〈d3, where δrupt is the debonding distance, yielding \({\sigma }_{v} \sim \eta \dot{\gamma }\). The capillary stress is of the order of the capillary force at contact (δ = 0) in Eq. (11) divided by the cross section 〈d2: σc ~ γs ∕ d〉. Hence, the dimensionless parameters are given by \(I=\dot{\gamma }\langle d\rangle {({\rho }_{s}/{\sigma }_{p})}^{1/2}\), ξ = γs  ∕ (σpd〉), and St =\({\rho }_{s}{\langle d\rangle }^{2}\dot{\gamma }/\eta\). Note that all other dimensionless variables can be expressed in terms of these three independent parameters. For example, the capillary number is given by Ca = σv  ∕ σc  = I2 ∕ (ξSt).

Fitting functions for apparent friction and packing fraction

According to Eq. (1), Im → 0 only if I → 0. In this quasistatic limit, the flow variables may still depend on ξ, which is the only dimensionless variable in the absence of inertial and viscous stresses. Accordingly, the rheology is expected to be described by the following general equations:

$$\mu ={\mu }_{c}(\xi )\,{G}_{\mu }({I}_{m}),$$
$$\Phi ={\Phi }_{c}(\xi )\,{G}_{\Phi }({I}_{m}),$$

These equations are based on functional distinction between the quasistatic limit (Im → 0) and shear-rate dependent behavior through Im. When Im → 0, we have μ → μc and Φ → Φc, and thus Gμ → 1 and GΦ → 1. According to the simulation data displayed in Fig. 3, μc and Φc are linear functions of ξ:

$${\mu }_{c}\simeq {\mu }_{0}(1+a\xi )$$
$${\Phi }_{c}\simeq {\Phi }_{0}(1-b\xi )$$

with a 0.095 and b 0.005. The limit values μ0  0.392 and Φ0 0.594 are the values of the apparent friction coefficient and packing fraction in the absence of cohesive and viscous forces (dry limit), respectively. Remarkably, the limit value Φ0 0.594 obtained here by simulations is equal to the measured value of packing fraction in glass-bead flows29.

The data points are nicely fitted by the following functional forms:

$$\frac{\mu }{{\mu }_{c}}={G}_{\mu }=1+\frac{{\Delta }_{\mu }}{1+{I}_{\mu }/{I}_{m}}$$
$$\frac{\Phi }{{\Phi }_{c}}={G}_{\Phi }=\frac{1}{1+{I}_{m}/{I}_{\Phi }}$$

with Δμ 1.100, Iμ 0.095 and IΦ 2.010. Interestingly, these functions are the same as those previously used for dry granular flows, with the new visco-cohesive inertial parameter Im replacing I28,40. This shows that, up to the values of Iμ, IΦ and Δμ, our simulation data are consistent with the experimental measurements of ref. 40 and ref. 28 in the dry case. The values of Iμ and IΦ are also very close to those obtained in the simulations of Roy et al.34 in a ring shear cell once re-expressed in terms of our definitions. While the functional forms are general28,31,32,34,35, the fitting parameters depend on the space dimension and material properties of the granular materials such as particle size distributions, particle shape and friction coefficient between particles. The values of α and β reflect the relative roles of viscous, inertial and cohesive forces in collective dissipation mechanisms whereas the values of Iμ, IΦ, and Δμ account for the effects of material parameters. Note also that, given the investigated range of values of Im, Eq. (7) can be linearized with an error  ~10−3, in agreement with refs. 32,34,41.

The fitting forms reveal the double role played by cohesion. Since Im is a decreasing function of ξ, Gμ declines with increasing ξ (dynamic effect) whereas μc increases (quasistatic effect). We can easily check from the parameter values that the quasistatic effect prevails although the dynamic effect becomes important at large values of ξ and Im. These roles are inversed for the packing fraction: Φc declines whereas GΦ increases when ξ is increased. In other words, the cohesive interactions lead to lower packing fraction (enhanced dilatancy due to cohesive forces) but the inertial effects tend to increase it.

Transition to the NVT ensemble and effective viscosities

The flow behavior can alternatively be described in the NVT ensemble (constant-volume shearing) in terms of effective normal and shear viscosities ηn and ηt defined by \({\sigma }_{n}={\eta }_{n}\dot{\gamma }\) and \({\sigma }_{t}={\eta }_{t}\dot{\gamma }\), respectively, where σt = μσn is the shear stress29. In this ensemble, the packing fraction Φ replaces pressure σn as control parameter, and the rheology is characterized by the functions ηn(Φ) and ηt(Φ)29. This is the approach mostly used in experiments on suspensions. Although our simulations were carried out under NPT conditions, we may deduce ηn(Φ) and ηt(Φ) in the NVT ensemble from μ(Im) and Φ(Im). Since no external stress is imposed in NVT, the shear stress σt is a dynamic variable that should scale with the internal shear-dependent stress σi + βσv. Moreover, the NPT and NVT points of view should be compared at the same normal stress state, i.e., σn = σp + ασc. Hence, according to Eq. (1), \({\sigma }_{n}={c}_{n}({\sigma }_{i}+\beta {\sigma }_{v})\equiv {c}_{n}{\sigma }_{n}{I}_{m}^{2}={\eta }_{n}\dot{\gamma }\), implying \({c}_{n}=1/{I}_{m}^{2}={\eta }_{n}/(\beta \eta +{\rho }_{s}{\langle d\rangle }^{2}\dot{\gamma })\), and σt = ct(σi + βσv) with \({\sigma }_{t}=\mu /{I}_{m}^{2}={\eta }_{t}/(\beta \eta +{\rho }_{s}{\langle d\rangle }^{2}\dot{\gamma })\). In this way, in a volume-controlled flow, cn and ct represent dimensionless viscosities with \(\beta \eta +{\rho }_{s}{\langle d\rangle }^{2}\dot{\gamma }\) as reference viscosity; see Supplementary Note 3 for more detail.

Figure 4 displays the effective dimensionless viscosities as a function of Φ. We see that all the data points collapse on a master curve when Φ is normalized by the critical packing fraction Φc. Both viscosities diverge as Φ → Φc and they are nicely fitted by the analytic expressions

$${c}_{n}=\frac{1}{{I}_{\Phi }^{2}}{\left(\frac{\Phi }{{\Phi }_{c}-\Phi }\right)}^{2},\qquad\qquad\qquad\qquad\qquad$$
$${c}_{t}=\mu {c}_{n}=\frac{1}{{I}_{\Phi }^{2}}{\left(\frac{\Phi }{{\Phi }_{c}-\Phi }\right)}^{2}\left\{1+\frac{{\Delta }_{\mu }}{1+\frac{{I}_{\mu }}{{I}_{\Phi }}\frac{\Phi }{{\Phi }_{c}-\Phi }}\right\},$$

readily deduced from the expressions of cn and ct as a function of Im together with Eqs. (6) and (7). As in suspensions, \(1/{c}_{t}={I}_{m}^{2}/\mu\) represents a generalized fluidity parameter of granular flows42.

Fig. 4: Effective viscosities in the NVT ensemble.

Normalized bulk viscosity cn (a) and shear viscosity ct (b) as a function of the normalized packing fraction Φ∕Φc, where Φc is the quasistatic packing fraction depending linearly on the cohesion index; see Eq. (5). The error bars represent the standard variation over steady-state flow, and the symbols and their colors are the same as those in Fig. 2. The solid lines are the functional forms of Eq. (8) and Eq. (9), respectively.

Scaling of coordination number and bond anisotropy

Although Im provides a unified description of the rheology by capturing the effects of particle interactions on the apparent friction coefficient and packing fraction and, alternatively, the effective viscosities, it is essential to check its robustness with respect to microstructural variables. Let us consider the shear plane defined by the directions of shearing \(\dot{\gamma }\) and confining stress σp (the flow being translationally invariant in the lateral direction). In this plane, the number density E(Θ) of bonds (both contacts and non-contact capillary bridges) per particle along a direction Θ can be approximated by15,21,43

$$E(\Theta )=\frac{Z}{2\pi }\{1+A\cos 2(\Theta -{\Theta }_{b})\},$$

which represents a truncated Fourier transform of E(Θ) with a period π since no intrinsic polarity can be attributed to contact orientations. Higher-order terms are generally negligibly small in granular flows. The coordination number Z and bond orientation anisotropy A are the lowest-order descriptors of granular texture. The angle Θb is the privileged bond orientation, and its value is close to π∕4 with respect to the flow direction.

Figure 5 shows Z and A normalized by their quasistatic values Zc and Ac, respectively, as a function of Im. We see that, despite their larger variability as compared to μ(Im) and Φ(Im), the data points collapse on a master curve within our statistical precision as a function of Im with the same values α 0.062 and β 0.075 as in μ(Im) and Φ(Im). The insets show the extent to which the same data points are dispersed when plotted as a function of I. We find that Zc is a decreasing linear function of ξ (as Φc) and Ac is an increasing linear function of ξ (as μc); see Supplementary Fig. 3. Moreover, the functional forms that fit AAc and ZZc are the same as Gμ and GΦ as a function of Im with different values of their free fitting parameters; see Supplementary Eqs. (3) and (4). This scaling of microstructural variables with Im through a functional dependence similar to flow variables clearly indicates that the shear strength is mainly due to the increasing aptitude of the particles to self-organize in an anisotropic network41,44.

Fig. 5: Scaling of microstructural variables.

Number density Z of capillary bonds (a) and bond orientation anisotropy A (b) as a function of the generalized inertial number Im defined by Eq. (1) with α 0.062 and β 0.075, for sets of parameters. The error bars represent the standard variation over steady-state flow, and the symbols and their colors are the same as those in Fig. 2. The solid lines are fitting forms similar to those used for μμc and Φ∕Φc with different parameter values; see Supplementary Note 2.


The additive rheology of granular materials, as demonstrated in this paper, is by no means self-evident. The expectation that a system involving several dimensionless parameters can ultimately be described by a single parameter combining those parameters is unusual. The deep reason behind such a behavior is the very nature of granular materials in which the particle interactions are concentrated at the contact points and the local dynamics is controlled by the shear rate. Hence, by careful distinction of stresses depending on the shear rate (first group) from those that are independent (second group), a single parameter can be defined by means of the stress additivity property. In this respect, the modified inertial number Im is a conceptual extension of the inertial number to arbitrary interactions between particles. Such a scaling works, however, by distinguishing the quasistatic limit and normalizing the packing fraction, apparent friction coefficient, coordination number and bond orientation anisotropy by their quasistatic limit values that depend on the dimensionless numbers of the second group (ξ in our case). Encompassing dry and cohesive-viscous flows, quasistatic and dynamic states, flow variables and microstructural parameters, this scaling provides a general framework for complex granular flows.

This framework can be applied to quantify the effects of friction coefficient between particles and particle shape and size distributions as material parameters that can influence the relative roles of internal stresses in the collective flow behavior, and thus the fitting parameters. Previous results on the rheology of granular materials suggest that the functional forms fitting the master curves should not depend on the particle shapes, size distributions and friction coefficient, although their free parameters will certainly do45,46,47,48,49,50,51,52. This is, however, a crucial step forward for application to different types of granular materials and for comparison with experiments.

It is also useful to point out that, for given particle size d and density ρs, each characteristic stress Σ corresponds also to a characteristic time \(T=d{({\rho }_{s}/\Sigma )}^{1/2}\). This relation implies that, by virtue of stress additivity, the inverse quadratic times 1∕T2 are additive. Hence, using the characteristic times and this rule, we arrive at the same expression of Im as in Eq. (1). Another interesting issue concerns an alternative rheology based on a ‘multiplicative’ expression of the flow variables, rather than additive combination of control parameters, as in ref. 34 applied to a cohesive-frictional granular material. In this approach, the apparent friction coefficient μ is expressed as a product of distinct functions of the primary dimensionless control parameters. This multiplicative partition works quite well for the cohesion index, and a prefactor similar to μ0(1 + aξ) in Eq. (4) is obtained. For the other functions, it is worth considering in more detail how they relate to the framework developed in this paper.

Let us finally recall that the inertial number was initially introduced in the context of cohesionless granular materials where the gravity or applied confining stress prevail. However, the cohesive stress may largely exceed the confining stress in fine powders, and therefore the inertial and viscous stresses must be advantageously compared to the cohesive stress rather than the confining stress. It is easy to see that, in this limit (σp → 0), the modified inertial number is reduced to Im = {Ca(β + St)∕α}1∕2. This is a simple expression that is expected to scale cohesive processes such as wet granulation and impact dynamics of cohesive aggregates. We thus propose to use impact experiments as a convenient means to investigate this scaling.


The model of capillary bridge

We assume that the liquid inside the agglomerate is in the ‘pendular’ state with a uniform distribution of capillary bridges between particles38,53,54,55,56,57,58,59. This distribution may be a consequence of mixing the liquid with the particles, drainage of a saturated packing, or capillary condensation from a vapor. For a separation distance above a debonding distance drupt, the bridge breaks and its liquid is shared between the two particles proportionally to their sizes53,60.

The capillary force fc between two particles depends on the liquid volume Vb of the bond, liquid-vapor surface tension γs and particle-liquid-gas contact angle θ. We used the following expression61:

$${f}_{c}=\left\{\begin{array}{ll}-\kappa \,R,\hfill &\! {\rm{for}}\,{\delta }_{n}< 0,\\ -\kappa \,R\,{e}^{-{\delta }_{n}/\lambda },&\;\;\qquad {\rm{for}}\,0\le {\delta }_{n}\le {d}_{{\mathrm{rupt}}},\\ 0,\hfill &\;\;\;{\rm{for}}\,{\delta }_{n}> {d}_{{\mathrm{rupt}}},\end{array}\right.$$

where \(R=\sqrt{{R}_{i}{R}_{j}}\) is the geometrical mean radius and the pre-factor κ is

$$\kappa =2\pi {\gamma }_{s}\cos \theta .$$

The debonding distance drupt is given by53

$${d}_{{\mathrm{rupt}}}\,=\,\left(1+\frac{\theta }{2}\right){V}_{b}^{1/3}\,.$$

The characteristic length λ in Eq. (11) is given by

$$\lambda =c\,h(r)\,{\left(\frac{{V}_{b}}{R^{\prime} }\right)}^{1/2},$$

where \(R^{\prime} =2{R}_{i}{R}_{j}/({R}_{i}+{R}_{j})\) and \(r\,=\,\max \{{R}_{i}/{R}_{j};{R}_{j}/{R}_{i}\}\) are the harmonic mean radius and the size ratio between two particles, h(r) = r−1∕2, and c 0.9. In all simulations, we set θ = 0 with the assumption that the particles are covered by a layer of the wetting liquid.

Note that the simulated system is an idealized model of wet granular materials in the pendular state. Nevertheless, we believe that our results can be extended to higher amounts of liquid since the liquid can easily flow in an unsaturated material to wet larger particle areas with a lower Laplace pressure. This leads to a nearly constant cohesive stress as far as the material is not fully saturated54,55. Hence, the leading effect of increased liquid volume is simply the increase of debonding distance when Eq. (11) is used.

The normal viscous force

The normal lubrication force fvis due to the effect of liquid bridges between two smooth spherical particles is given by62,63,64

$${f}_{{\mathrm{vis}}}\,=\,\frac{3}{2}\pi {R}^{2}\eta \frac{{v}_{n}}{{\delta }_{n}},$$

where η is the liquid viscosity and vn is the relative normal velocity, assumed to be positive when the gap δn is decreasing. This force diverges when the gap δn tends to zero. But for slightly rough particles, the characteristic size of the asperities allows for collision in finite time. Hence, we introduce a characteristic length δn0 corresponding to the size of asperities so that the lubrication force for δn > 0 is given by

$${f}_{{\mathrm{vis}}}\,=\,\frac{3}{2}\pi {R}^{2}\eta \frac{{v}_{n}}{{\delta }_{n}+{\delta }_{n0}}\ \ \ \ {\rm{for}}\ \ {\delta }_{n}> \ 0$$

For δn < 0 (a contact between two particles), we assume that the lubrication force remains equal to its largest value:

$${f}_{{\mathrm{vis}}}\,=\,\frac{3}{2}\pi {R}^{2}\eta \frac{{v}_{n}}{{\delta }_{n0}}\ \ \ \ {\rm{for}}\ \ {\delta }_{n}\le \ 0.$$

In our simulations, we set δn0 = 5 × 10−4dmin, where dmin is the smallest particle diameter. This value is sufficiently small to allow the lubrication force to be effective without leading to its divergence at contact.

Simulation method

For the simulations, we used the molecular dynamics (MD) method with frictional contact interactions modeled by linear elastic repulsion along the normal direction and linear spring with a Coulomb threshold along the tangential direction, together with the previous approximate expressions of capillary force and viscous force acting between neighboring particles.

The particle displacements are calculated by step-wise resolution of Newton’s second law:

$${m}_{i}\frac{{d}^{2}{{\bf{r}}}_{i}}{d{t}^{2}}= \, \sum _{j}[({f}_{n}^{ij}+{f}_{c}^{ij}+{f}_{\mathrm{vis}}^{ij}){{\bf{n}}}^{ij}+{f}_{t}^{ij}{{\bf{t}}}^{ij}],\\ {{\bf{I}}}_{i}\frac{d{{\boldsymbol{\omega }}}_{i}}{dt}= \, \sum _{j}{f}_{t}^{ij}{{\bf{c}}}^{ij}\times {{\bf{t}}}^{ij},$$

where particle i is assumed to interact with its neighbors j via normal contact forces fn, tangential contact forces ft, capillary forces fc, and viscous forces fvis. ωi is the rotation vector of particle i, and mi, Ii, and ri are its mass, inertia matrix, and position, respectively. nij denotes the unit vector perpendicular to the contact plane between the particles i and j and points from j to i. tij is the unit vector in the contact plane pointing in the direction opposite to the relative tangential displacement of the two particles. cij is the vector joining the center of particle i to the contact point with particle j.

The normal contact force fn is the sum of four contributions:


where \({f}_{n}^{e}\) is the elastic repulsion force, and \({f}_{n}^{d}\) is the normal damping force. The elastic force \({f}_{n}^{e}=-{k}_{n}{\delta }_{n}\) is a linear function of the normal elastic deflection δn, where kn is the normal stiffness, and the damping force \({f}_{n}^{d}={\gamma }_{n}{\dot{\delta }}_{n}\) is proportional to the relative normal velocity \({\dot{\delta }}_{n}\), where γn is the normal viscous damping parameter. These elastic and damping forces occur only when two particles are in contact (δn < 0). The tangential force ft is composed of an elastic force \({f}_{t}^{e}=-{k}_{t}{\delta }_{t}\) and a damping force \({f}_{t}^{d}={\gamma }_{t}{\dot{\delta }}_{t}\), where kt is the tangential stiffness, γt is the tangential damping parameter, and δt and \({\dot{\delta }}_{t}\) are the tangential displacement and velocity, respectively. According to the Coulomb friction law, the tangential force is below μfn, where μ is the friction coefficient65,66,67:

$${f}_{t}=-\min \left\{| -{k}_{t}{\delta }_{t}+{\gamma }_{t}{\dot{\delta }}_{t}| ,| \mu {f}_{n}| \right\}sgn({\dot{\delta }}_{t}).$$

The tangential lubrication force was neglected as it is one order of magnitude below the normal lubrication force.

The equations of motion were integrated by a step-wise velocity-Verlet aglorithm68. The constant physical parameters were set to typical values of fine granular materials composed of hard particles. We used a weak size polydispersity with a uniform distribution of particle volumes and a ratio 2 between the largest and smallest particle diameters. All the constant physical and numerical parameter values are given in Table 1. Note that the relative pressure p* = σp  ∕ (〈dkn), representing the ratio of contact deflection to particle diameter, is of the order of 10−5. Our simulations correspond therefore with a high precision to the ideal limit of perfectly rigid particles.

Table 1 Constant simulation parameters.

Data availability

All relevant data are available upon request from the authors.

Code availability

The simulation code is available at and upon reasonable request from the authors.


  1. 1.

    Savage, S. B. & Hutter, K. The dynamics of avalanches of granular materials from initiation to runout. Part I: analysis. Acta Mechanica 86, 201–223 (1991).

    MathSciNet  MATH  Article  Google Scholar 

  2. 2.

    Campbell, C. S., Cleary, P. W. & Hopkins, M. Large-scale landslide simulations: global deformation, velocities and basal friction. J. Geophys. Res. Solid Earth 100, 8267–8283 (1995).

    Article  Google Scholar 

  3. 3.

    Cruden,  D. M. &  Varnes, J. D. Chapter: Landslide types and processes. In Landslides: Investigation and Mitigation Vol. 247, 36–75 (National Research Council, Washington, D.C., 1996).

  4. 4.

    Tegzes, P., Vicsek, T. & Schiffer, P. Avalanche dynamics in wet granular materials. Phys. Rev. Lett. 89, 094301 (2002).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  5. 5.

    Rematre A., Malet, J. P., Maquaire, O., Ancey, C. & Locat, J. Flow behaviour and runout modelling of a complex debris flow in a clay-shale basin. Earth Surf. Proc. Landforms 30, 479–488 (2005).

    ADS  Article  Google Scholar 

  6. 6.

    Staron, L. & Hinch, E. The spreading of a granular mass: role of grain properties and initial conditions. Granul. Matter 9, 205–217 (2007).

    MATH  Article  Google Scholar 

  7. 7.

    Mutabaruka, P., Delenne, J.-Y., Soga, K. & Radjai, F. Initiation of immersed granular avalanches. Phys. Rev. E 89, 052203 (2014).

    ADS  Article  CAS  Google Scholar 

  8. 8.

    Delannay, R., Valance, A., Mangeney, A., Roche, O. & Richard, P. Granular and particle-laden flows: from laboratory experiments to field observations. J. Phys. D 50, 053001 (2017).

    ADS  Article  CAS  Google Scholar 

  9. 9.

    Mikami, T., Kamiya, H. & Horio, M. Numerical simulation of cohesive powder behavior in a fluidized bed. Chem. Eng. Sci. 53, 1927–1940 (1998).

    CAS  Article  Google Scholar 

  10. 10.

    Iveson, S., Beathe, J. & Page, N. The dynamic strength of partially saturated powder compacts: the effect of liquid properties. Powder Technol. 127, 149–161 (2002).

    CAS  Article  Google Scholar 

  11. 11.

    Herminghaus, S. Dynamics of wet granular matter. Adv. Phys. 54, 221–261 (2005).

    ADS  Article  Google Scholar 

  12. 12.

    Rognon, P., Roux, J.-N., Naaim, M. & Chevoir, F. Dense flows of cohesive granular materials. J. Fluid Mech. 596, 21–47 (2008).

    ADS  CAS  MATH  Article  Google Scholar 

  13. 13.

    Rondet, E., Delalonde, M., Ruiz, T. & Desfoursb, J. P. Fractal formation description of agglomeration in low shear mixer. Chem. Eng. J. 164, 376–382 (2010).

    CAS  Article  Google Scholar 

  14. 14.

    Jaeger, H. & Nagel, S. Granular solids, liquids and gases. Rev. Mod. Phys. 68, 1259–1273 (1996).

    ADS  Article  Google Scholar 

  15. 15.

    Radjai, F., Roux, J.-N. & Daouadji, A. Modeling granular materials: century-long research across scales. J. Eng. Mech. 143, 04017002 (2017).

    Article  Google Scholar 

  16. 16.

    Radjai, F., Wolf, D. E., Jean, M. & Moreau, J. Bimodal character of stress transmission in granular packings. Phys. Rev. Lett. 80, 61–64 (1998).

    ADS  CAS  Article  Google Scholar 

  17. 17.

    Mueth, D. M. et al. Signatures of granular microstructure in dense shear flows. Nature 406, 385–389 (2000).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  18. 18.

    Radjai, F. & Roux, S. Turbulentlike fluctuations in quasistatic flow of granular media. Phys. Rev. Lett. 89, 064302 (2002).

    ADS  PubMed  Article  CAS  PubMed Central  Google Scholar 

  19. 19.

    Corwin, E. I., Jaeger, H. M. & Nagel, S. R. Structural signature of jamming in granular media. Nature 435, 1075–1078 (2005).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  20. 20.

    Richard, P., Nicodemi, M., Delannay, R., Ribière, P. & Bideau, D. Slow relaxation and compaction of granular systems. Nat. Mat. 4, 121–128 (2005).

    CAS  Article  Google Scholar 

  21. 21.

    Radjai, F. & Richefeu, V. Bond anisotropy and cohesion of wet granular materials. Philos. T. R. Soc. A 367, 5123–5138 (2009).

    ADS  Article  Google Scholar 

  22. 22.

    Staron, L., Lagrée, P.-Y., Josserand, C. & Lhuillier, D. Flow and jamming of a two-dimensional granular bed: Toward a nonlocal rheology? Phys. Fluids 22, 113303 (2010).

    ADS  Article  CAS  Google Scholar 

  23. 23.

    Miller, T., Rognon, P., Metzger, B. & Einav, I. Eddy viscosity in dense granular flows. Phys. Rev. Lett. 111, 058002 (2013).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  24. 24.

    Luding, S. So much for the jamming point. Nat. Phys. 12, 531–532 (2016).

    CAS  Article  Google Scholar 

  25. 25.

    Kou, B. et al. Granular materials flow like complex fluids. Nature 551, 360–363 (2017).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  26. 26.

    GDR-MiDi. On dense granular flows. Eur. Phys. J. E 14, 341–365 (2004).

    Article  CAS  Google Scholar 

  27. 27.

    da Cruz, F., Emam, S., Prochnow, M., Roux, J.-N. & Chevoir, F. Rheophysics of dense granular materials: discrete simulation of plane shear flows. Phys. Rev. E 72, 021309 (2005).

    ADS  Article  CAS  Google Scholar 

  28. 28.

    Jop, P., Forterre, Y. & Pouliquen, O. A constitutive law for dense granular flows. Nature 441, 727–730 (2006).

    ADS  CAS  PubMed  MATH  Article  PubMed Central  Google Scholar 

  29. 29.

    Boyer, F., Guazzelli, E. & Pouliquen, O. Unifying suspension and granular rheology. Phys. Rev. Lett. 107, 188301 (2011).

    ADS  PubMed  Article  CAS  PubMed Central  Google Scholar 

  30. 30.

    Kamrin, K. & Koval, G. Nonlocal constitutive relation for steady granular flow. Phys. Rev. Lett. 108, 178301 (2012).

    ADS  PubMed  Article  CAS  PubMed Central  Google Scholar 

  31. 31.

    Trulsson, M., Andreotti, B. & Claudin, P. Transition from the viscous to inertial regime in dense suspensions. Phys. Rev. Lett. 109, 118305 (2012).

    ADS  PubMed  Article  CAS  PubMed Central  Google Scholar 

  32. 32.

    Berger, N., Azéma, E., Douce, J.-F. & Radjai, F. Scaling behaviour of cohesive granular flows. Eur. Phys. Lett. 112, 64004 (2015).

    ADS  Article  CAS  Google Scholar 

  33. 33.

    Khamseh, S., Roux, J.-N. & Chevoir, Fmc Flow of wet granular materials: a numerical study. Phys. Rev. E 92, 022201 (2015).

    ADS  Article  CAS  Google Scholar 

  34. 34.

    Roy, S., Luding, S. & Weinhart, T. A general(ized) local rheology for wet granular materials. New J. Phys. 19, 043014 (2017).

    ADS  Article  Google Scholar 

  35. 35.

    Amarsid, L. et al. Viscoinertial regime of immersed granular flows. Phys. Rev. E 96, 012901 (2017).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  36. 36.

    Badetti, M., Fall, A., Chevoir, F. & Roux, J.-N. Shear strength of wet granular materials: macroscopic cohesion and effective stress. Eur. Phys. J. E 41, 68 (2018).

    PubMed  Article  CAS  PubMed Central  Google Scholar 

  37. 37.

    Bagnold, R. A. Experiments on a gravity-free dispersion of large solid spheres in a newtonian fluid under shear. Proc. Royal Soc. London 225, 49–63 (1954).

    ADS  Google Scholar 

  38. 38.

    Richefeu, V., El Youssoufi, M. & F. Radjai, F. Shear strength properties of wet granular materials. Phys. Rev. E 73, 051304 (2006).

    ADS  Article  CAS  Google Scholar 

  39. 39.

    Rognon, P. G., Roux, J.-N., Wolf, D., Naaim, M. & Chevoir, F. Rheophysics of cohesive granular materials. Eur. Phys. Lett. 74, 644–650 (2006).

    ADS  CAS  Article  Google Scholar 

  40. 40.

    Pouliquen, O., Cassar, C., Jop, P., Forterre, Y. & Nicolas, M. Flow of dense granular material: towards simple constitutive laws. J. Stat. Mech. 2006, 7020–7020 (2006).

    MATH  Article  Google Scholar 

  41. 41.

    Azéma, E. & Radjai, F. Internal structure of inertial granular flows. Phys. Rev. Lett. 112, 078001 (2014).

    ADS  PubMed  Article  CAS  PubMed Central  Google Scholar 

  42. 42.

    Bocquet, L., Colin, A. & Ajdari, A. Kinetic theory of plastic flow in soft glassy materials. Phys. Rev. Lett. 103, 036001 (2009).

    ADS  PubMed  Article  CAS  PubMed Central  Google Scholar 

  43. 43.

    Rothenburg, L. & Bathurst, R. J. Analytical study of induced anisotropy in idealized granular materials. Géotechnique 39, 601–614 (1989).

    Article  Google Scholar 

  44. 44.

    Radjai, F., Delenne, J.-Y., Azéma, E. & Roux, S. Fabric evolution and accessible geometrical states in granular materials. Granul. Matter 14, 259–264 (2012).

    Article  Google Scholar 

  45. 45.

    Voivret, C., Radjai, F., Delenne, J.-Y. & Youssoufi, M. S. E. Multiscale force networks in highly polydisperse granular media. Phys. Rev. Lett. 102, 178001 (2009).

    ADS  CAS  PubMed  MATH  Article  PubMed Central  Google Scholar 

  46. 46.

    Azéma, E., Radjai, F. & Saussine, G. Quasistatic rheology, force transmission and fabric properties of a packing of irregular polyhedral particles. Mech. Mat. 41, 721–741 (2009).

    Article  Google Scholar 

  47. 47.

    Estrada, N., Azéma, E., Radjai, F. & Taboada, A. Identification of rolling resistance as a shape parameter in sheared granular media. Phys. Rev. E 84, 011306 (2011).

    ADS  Article  CAS  Google Scholar 

  48. 48.

    Cegeo, B. et al. Particle shape dependence in 2D granular media. Eur. Phys. Lett. 98, 44008 (2012).

    ADS  Article  CAS  Google Scholar 

  49. 49.

    Shaebani, M. R., Madadi, M., Luding, S. & Wolf, D. E. Influence of polydispersity on micromechanics of granular materials. Phys. Rev. E 85, 011301 (2012).

    ADS  Article  CAS  Google Scholar 

  50. 50.

    Ogarko, V. & Luding, S. Prediction of polydisperse hard-sphere mixture behavior using tridisperse systems. Soft Matter 9, 9530–9534 (2013).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  51. 51.

    Kumar, N., Imole, O. I., Magnanimo, V. & Luding, S. Effects of polydispersity on the micro-macro behavior of granular assemblies under different deformation paths. Particuology 12, 64–79 (2014).

    Article  Google Scholar 

  52. 52.

    Nguyen, D.-H., Azéma, E., Radjai, F. & Sornay, P. Effect of size polydispersity versus particle shape in dense granular media. Phys. Rev. E 90, 012202 (2014).

    ADS  Article  CAS  Google Scholar 

  53. 53.

    Lian, G., Thornton, C. & Adams, M. A theoretical study of the liquid bridge forces between two rigid spherical bodies. J. Colloid Interf. Sci. 161, 138–147 (1993).

    ADS  CAS  Article  Google Scholar 

  54. 54.

    Scheel, M. et al. Liquid distribution and cohesion in wet granular assemblies beyond the capillary bridge regime. J. Phys. Cond. Matter 20, 494236 (2008).

    ADS  Article  CAS  Google Scholar 

  55. 55.

    Delenne, J.-Y., Richefeu, V. & Radjai, F. Liquid clustering and capillary pressure in granular media. J. Fluid Mech. 762, R5 (2012).

    MathSciNet  Article  CAS  Google Scholar 

  56. 56.

    Vo, T.-T., Mutabaruka, P., Delenne, J.-Y., Nezamabadi, S. & Radjai, F. Strength of wet agglomerates of spherical particles: effects of friction and size distribution. EPJ Web Conf. 140, 08021 (2017).

    Article  CAS  Google Scholar 

  57. 57.

    Than, V. D. et al. Basic mechanical properties of wet granular materials: a DEM study. J. Eng. Mech. 143, C4016001 (2017).

    Article  Google Scholar 

  58. 58.

    Vo, T.-T. et al. Mechanical strength of wet particle agglomerates. Mech. Res. Com. 92, 1–7 (2018).

    Article  Google Scholar 

  59. 59.

    Vo, T.-T. Agglomeration of wet particles in dense granular flows. Eur. Phys. J. E. 42, 127 (2019).

    Article  CAS  Google Scholar 

  60. 60.

    Willett, C., Adans, M., Johnson, S. & Seville, J. Capillary bridges between two spherical bodies. Langmuir 16, 9396–9405 (2000).

    CAS  Article  Google Scholar 

  61. 61.

    Richefeu, V., Radjai, F. & Youssoufi, M. S. E. Stress transmission in wet granular materials. Eur. Phys. J. E 21, 359–369 (2007).

    Article  CAS  Google Scholar 

  62. 62.

    Brenner, H. The slow motion of a sphere through a viscous fluid towards a plane surface. Chem. Eng. Sci. 16, 242–251 (1961).

    CAS  Article  Google Scholar 

  63. 63.

    Happel, J. & Brenner,  H. Low Reynolds Number Hydrodynamics (Martinus Nijhoff Publishers, Dordrecht, 1983).

  64. 64.

    Lefebvre, G. & Jop, P. Erosion dynamics of a wet granular medium. Phys. Rev. E 8, 032205 (2013).

    ADS  Article  CAS  Google Scholar 

  65. 65.

    Schäfer, J., Dippel, S. & Wolf, D. E. Force schemes in simulations of granular materials. J. Phys. I France 6, 5–20 (1996).

    Article  Google Scholar 

  66. 66.

    Dippel, S., Batrouni, G. G. & Wolf, D. E. How transversal fluctuations affect the friction of a particle on a rough incline. Phys. Rev. E 56, 3645–3656 (1997).

    ADS  CAS  Article  Google Scholar 

  67. 67.

    Luding,  S. Collisions and contacts between two particles. (eds. Herrmann, H. J., Hovi, J.-P. & Luding, S.) In Physics of Dry Granular Media-NATO ASI Series E350, 285 (Kluwer Academic Publishers, Dordrecht, 1998).

  68. 68.

    Radjai, F. & Dubois, F. (eds.) Discrete Numerical Modeling of Granular Materials (Wiley-ISTE, New-York, 2011).

Download references


The authors acknowledge financial support by the Ministry of Education and Training in Vietnam, Campus France, and Labex NUMEV (University of Montpellier). This work was realized with the support of MESO@LR-Platform at the University of Montpellier.

Author information




F.R., S.N. and J.Y.D. conceived the research idea. P.M. developed the particle dynamics program CFGD++3D used in this work and provided support for the simulations. T.T.V. carried out all the simulations, analyzed the data, and prepared all the figures. All authors discussed the results and contributed to the writing of the paper.

Corresponding author

Correspondence to Farhang Radjai.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature Communications thanks Stefan Luding, M. Saadatfar and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Vo, T.T., Nezamabadi, S., Mutabaruka, P. et al. Additive rheology of complex granular flows. Nat Commun 11, 1476 (2020).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing