Featured
-
-
Article
| Open AccessAntireflection microstructures on ZnSe for mid- and far-IR fabricated by femtosecond laser ablation assisted with wet chemical etching
- Andrei Teslenko
- , Tatiana Konstantinova
- & Mikhail Tarabrin
-
Article
| Open AccessApplication of digital twins for simulation based tailoring of laser induced graphene
- José Carlos Santos-Ceballos
- , Foad Salehnia
- & Xavier Vilanova
-
Article
| Open AccessAutomatic brain-tumor diagnosis using cascaded deep convolutional neural networks with symmetric U-Net and asymmetric residual-blocks
- Mahmoud Khaled Abd-Ellah
- , Ali Ismail Awad
- & Amira Mofreh Ibraheem
-
Article
| Open AccessA comprehensive approach to characterize navigation instruments for magnetic guidance in biological systems
- Peter Blümler
- , Fabian Raudzus
- & Friederike Schmid
-
Article
| Open AccessResponse spectrum-based analysis of airborne radar random vibration and multi-point control improvement
- Jie Liu
- , Zezheng Liu
- & Libin Du
-
Article
| Open AccessStudy of Urbach energy and Kramers–Kronig on Mn and Zn doped NiFe2O4 ferrite nanopowder for the determination of structural and optical characteristics
- N. Nazari
- , M. M. Golzan
- & Kh. Mabhouti
-
Article
| Open AccessBi-stability in femtosecond laser ablation by MHz bursts
- Andrius Žemaitis
- , Mantas Gaidys
- & Mindaugas Gedvilas
-
Article
| Open AccessA novel portable anechoic chamber using ultra-thin 2D microwave absorber for industrial 5.0
- Amit Kumar Baghel
- , Youssef Bikrat
- & Helena Alves
-
Article
| Open AccessRevealing process and material parameter effects on densification via phase-field studies
- Marco Seiz
- , Henrik Hierl
- & Wolfgang Rheinheimer
-
Article
| Open AccessDesign, construction and field testing of a manually feeding semiautomatic sugarcane dud chipper
- Abdallah Elshawadfy Elwakeel
- , Saher M. A. Mohamed
- & Zaher Mundher Yaseen
-
Article
| Open AccessA new approach for fast field calculation in electrostatic electron lens design and optimization
- Neda Hesam Mahmoudi Nezhad
- , Mohamad Ghaffarian Niasar
- & Pieter Kruit
-
Article
| Open AccessEnhancement of the mechanical properties in ultra-low weight SWCNT sandwiched PDMS composites using a novel stacked architecture
- Pavithra Ananthasubramanian
- , Rahul Sahay
- & Nagarajan Raghavan
-
Article
| Open AccessUsing millimeter-wave radar to evaluate the performance of dummy models for advanced driving assistance systems test
- Donghui Lv
- , Lin Yuan
- & Xue Bai
-
Article
| Open AccessSuperconductivity of barium with highest transition temperatures in metallic materials at ambient pressure
- Masaki Mito
- , Hiroki Tsuji
- & Zenji Horita
-
Article
| Open AccessAssessment of refining efficiency during the refining cycle in a foundry degassing unit in industrial conditions
- Ladislav Socha
- , Tomáš Prášil
- & Petr Nuska
-
Article
| Open AccessStudy on the design calculation method and construction control method of suction drum foundation for guided frame platform
- Zhang Xin
- , Li Yuansong
- & Li Zhaoxian
-
Article
| Open AccessCrack reduction in laser powder bed fusion of MnAl(C) using graphene oxide coated powders
- Simon Tidén
- , Himesha Abenayake
- & Martin Sahlberg
-
Article
| Open AccessA guidance system for robotic welding based on an improved YOLOv5 algorithm with a RealSense depth camera
- Maoyong Li
- , Jiqiang Huang
- & Ruiying Zhang
-
Article
| Open AccessDefects detection of GMAW process based on convolutional neural network algorithm
- Haichao Li
- , Yixuan Ma
- & Tong Che
-
Article
| Open AccessSimulation study of a novel small animal FLASH irradiator (SAFI) with integrated inverse-geometry CT based on circularly distributed kV X-ray sources
- Yuewen Tan
- , Shuang Zhou
- & Tiezhi Zhang
-
-
Article
| Open AccessDesign of novel highly sensitive sensors for crack detection in metal surfaces: theoretical foundation and experimental validation
- Zahra Shaterian
- , Ali K. Horestani
- & Michal Mrozowski
-
Article
| Open AccessIn situ observation of melt pool evolution in ultrasonic vibration-assisted directed energy deposition
- Salma A. El-Azab
- , Cheng Zhang
- & Julie M. Schoenung
-
Article
| Open AccessDesign and fabrication of 3D-printed patient-specific soft tissue and bone phantoms for CT imaging
- Kai Mei
- , Pouyan Pasyar
- & Peter B. Noël
-
Article
| Open AccessA Monte Carlo model of the Dingo thermal neutron imaging beamline
- Klaudiusz Jakubowski
- , Andrew Chacon
- & Mitra Safavi-Naeini
-
Article
| Open AccessEnhanced atmospheric water harvesting efficiency through green-synthesized MOF-801: a comparative study with solvothermal synthesis
- Mohammad Aghajani Hashjin
- , Shadi Zarshad
- & Sadegh Sadeghzadeh
-
Article
| Open AccessEffect of microstructure refinement of pure copper on improving the performance of electrodes in electro discharge machining (EDM)
- Jacek Skiba
- , Mariusz Kulczyk
- & Kamil Nowak
-
Article
| Open AccessA SISO FMCW radar based on inherently frequency scanning antennas for 2-D indoor tracking of multiple subjects
- Giulia Sacco
- , Marco Mercuri
- & Guido Dolmans
-
Article
| Open AccessControlling crystallites orientation and facet exposure for enhanced electrochemical properties of polycrystalline MoO3 films
- Konrad Trzciński
- , Zuzanna Zarach
- & Mirosław Sawczak
-
Article
| Open AccessSolution processed multi-layered thin films of Ge20Sb5S75 and Ge20Sb5Se75 chalcogenide glasses
- Jiri Jemelka
- , Karel Palka
- & Miroslav Vlcek
-
Article
| Open AccessAnalysis of the static and dynamic characteristics of the electro-hydraulic pressure servo valve of robot
- Jianrui Zhang
- , Xiaonan Pan
- & Jian Kang
-
Article
| Open AccessSimplified 3D hydrodynamic flow focusing for lab-on-chip single particle study
- Filippo Storti
- , Silvio Bonfadini
- & Luigino Criante
-
Article
| Open AccessHigh gravity material extrusion system and extruded polylactic acid performance enhancement
- Xin Jiang
- & Ryo Koike
-
Article
| Open AccessA module classification method for light industrial equipment based on improved NSGA2-FCM algorithm
- Hui Zheng
- , Hanwen Guo
- & Xiao Guo
-
Article
| Open AccessImplantation site design for large area diamond quantum device fabrication
- Milan Vićentijević
- , Milko Jakšić
- & Tomislav Suligoj
-
Article
| Open AccessAn open carbon–phenolic ablator for scientific exploration
- Erik Poloni
- , Felix Grigat
- & Stefan Loehle
-
Article
| Open AccessMaterials fatigue prediction using graph neural networks on microstructure representations
- Akhil Thomas
- , Ali Riza Durmaz
- & Chris Eberl
-
Article
| Open AccessHigh-frequency measurement of concentration in an isothermal methane–air gas mixture using spontaneous Raman spectroscopy
- Jocelino Rodrigues
- , Lee Weller
- & Simone Hochgreb
-
Article
| Open AccessOrganic electrochemical transistors printed from degradable materials as disposable biochemical sensors
- Nicolas Fumeaux
- , Claudio Pinto Almeida
- & Danick Briand
-
Article
| Open AccessEstablishing and testing a robot-based platform to enable the automated production of nanoparticles in a flexible and modular way
- Sofia Dembski
- , Thomas Schwarz
- & Jan Hansmann
-
Article
| Open AccessMXene/graphene oxide nanocomposites for friction and wear reduction of rough steel surfaces
- Ali Zayaan Macknojia
- , Aditya Ayyagari
- & Diana Berman
-
Article
| Open AccessPure edge-contact devices on single-layer-CVD-graphene integrated into a single chip
- Saraswati Behera
-
Article
| Open AccessData-driven automated control algorithm for floating-zone crystal growth derived by reinforcement learning
- Yusuke Tosa
- , Ryo Omae
- & Shunta Harada
-
Article
| Open AccessOptimum scavenger concentrations for sonochemical nanoparticle synthesis
- Henrik E. Hansen
- , Frode Seland
- & Bruno G. Pollet
-
Article
| Open AccessA sophisticated design of copper core to converge rotating eddy current control for detecting cracks in conductive materials
- Le Quang Trung
- , Naoya Kasai
- & Seishu Miyazaki
-
Article
| Open AccessTwin-pulse seeding enables pump-probe capabilities in the EUV to soft X-ray spectrum at synchrotron light sources
- X. Yang
- , G. Penn
- & T. Shaftan
-
Article
| Open AccessDeep multilevel wet etching of fused silica glass microstructures in BOE solution
- T. G. Konstantinova
- , M. M. Andronic
- & I. A. Rodionov
-
Article
| Open AccessMicrowave demonstration of Purcell effect enhanced radiation efficiency
- L. D. Stanfield
- , A. W. Powell
- & A. P. Hibbins
-
Article
| Open AccessThe efficiency of tumble finishing as a final post-treatment for fatigue enhancement of notched laser powder bed fusion AlSi10Mg
- Erfan Maleki
- , Sara Bagherifard
- & Mario Guagliano