Nature | Comment

Medical microbots need better imaging and control

Mariana Medina-Sánchez and Oliver G. Schmidt set priorities for more realistic tests of tiny machines that could be used to diagnose and treat conditions.

Article tools

M. Medina-Sánchez, L. Schwarz, A. K. Meyer, F. Hebenstreit & O. G. Schmidt/Nano Lett. 16, 555–561 (2016)

A helical micromotor helps an immotile but healthy bovine sperm cell get to an egg in culture.

More than 50 years ago, physicist Richard Feynman spoke of “swallowing the surgeon” in his classic lecture, 'There's plenty of room at the bottom'. Today, scientists are designing microscopic devices — microbots and micromotors — to eventually move through the body to perform medical tasks. Synthetic rods, tubes, helices, spheres or cages as small as a cell could be sent into the blood, liver, stomach or reproductive tract to diagnose conditions, carry drugs or perform surgery.

So far, most microbot experiments have been done in vitro under conditions very different from those in the human body. Many devices rely on toxic fuels, such as hydrogen peroxide. They are simple to steer in a Petri dish, but harder to control in biological fluids full of proteins and cells, and through the body's complex channels and cavities.

To enter clinical trials, microbots must clear two major hurdles. First, researchers need to be able to see and control them operating inside the body — current imaging techniques have insufficient resolution and sensitivity. Second, the vehicles need to be biocompatible and be removed or stabilized after use. Achieving both aims would set the stage for further improvements — in steering and mobility, materials and capabilities.

We call on microrobotics researchers, materials scientists and bioimaging and medical specialists to work together to solve these problems. And regulatory agencies need to put in place directives for testing therapeutics that are based on microbots.

There are three types of micromotors. They can be categorized according to their main propulsion mode: chemical, physical or biological (see 'Three micromotor prototypes'). Each has pros and cons.

Chemical micromotors transform fuel energy into motion1. Often, a catalyst (such as platinum, silver or palladium) within the micromotor reacts with liquid surrounding it (usually hydrogen peroxide or organic compounds). These motors are hard to control. Some move by expelling gas bubbles from one end of an asymmetrical tube. Others are made of two metals (usually gold and platinum) and propelled by differences in, for instance, tension, fuel consumption or light absorption rates between their faces. They may be guided by chemical or thermal gradients in their surroundings, or by applying magnetic fields, light or ultrasound.

Outside the body, micromotors can be based on poisonous fuels. For example, they could burn a pollutant in water as fuel, or be used for on-chip chemical and biological sensing. For in vivo uses, they need to co-opt fuels that are present in the body, such as glucose, urea or other physiological fluids2. For example, tubular micromotors have been propelled by dissolving zinc in acid in a mouse's stomach3. The endurance and efficiency of these motors need to be improved.

Physical micromotors are propelled by varying fields. For instance, a helix of magnetic material spins around its axis under a rotating magnetic field. These devices are easier to control: changing the field's orientation and frequency alters the direction and speed of the motor. Such 'magnetic swimmers' mimic flagella, the tails that propel some microorganisms4. Ultrasound, too, can be used for propulsion and guidance5.

These micromotors have less thrust than the chemical motors and need complicated actuation systems. They hold promise for carrying cargo (sensors, drugs and genetic therapies), for capturing and transporting cells and for performing microsurgery and biopsies1.

A magnetically driven helix captures an immotile bovine sperm and carries it to an egg cell.

M. Medina-Sánchez, L. Schwarz, A. K. Meyer, F. Hebenstreit & O. G. Schmidt Nano Lett. 16, 555–561 (2016)

Biohybrid micromotors combine a biological agent such as a bacterium, muscle or sperm cell with a synthetic part. They can be directed by external fields or by the cells and microorganisms themselves, as they move, sense and respond to biochemicals, acidity or magnetic fields. For example, bacteria that perceive Earth's magnetism have been explored as potential drug carriers in blood vessels6. Biohybrid swimmers may travel naturally through the body. They can pass through tissues to deliver drugs deeply and can stimulate reactions such as those involved in fertilization.

For example, we have demonstrated how a motile sperm cell, loaded with a drug, could be coupled to a magnetic microstructure that guides and then releases the sperm–drug complex to potentially treat cancers in the reproductive tract7. And we have used rotating magnets to drive a helix-shaped physical micromotor to deliver a live but immotile bovine sperm cell to an oocyte (egg). Such 'spermbots' could lead to new assisted-reproduction techniques8, 9. Low sperm count and motility are the two main causes of male infertility, accounting for 40% of all cases. If spermbots can capture and guide sperm to an oocyte to fertilize it in vivo, this should result in higher fertilization rates, procedures that are less invasive, and more-natural conditions for the developing embryo.

Practical challenges

All three micromotor types share challenges. The materials they are made from must be proved to be biocompatible (such as polymers; metals including gold and zinc; proteins and DNA) or biodegradable (alginate, gelatin, calcium carbonate). They need to be able to perform a wide range of tasks: from sensing and responding to their environment to storing and delivering molecules or cells when stimulated by physical cues or by certain molecules, disease biomarkers, temperatures or levels of acidity. They need to be more manoeuvrable in three dimensions, in viscous and elastic body fluids and in phantom organs. And their targeting must be accurate.

A chemically propelled microjet 400 nanometres across breaks down hydrogen peroxide to give off oxygen bubbles.

A. A. Solovev et al. ACS Nano 6, 1751 (2012)

Before any of these tiny vehicles can be used in vivo, we need to plan how to remove or stop them. They might be driven back to the starting point (mouth, eyes, ear, vagina, urethra), but this could be tedious, especially when many have been introduced. They could degrade, with the products absorbed or expelled naturally, as with tissue-engineering scaffolds, for instance. Biodegradable materials such as chitosan, polylactic acid or polyacrolactone dissolve at a certain pH, temperature or time. But small amounts of magnetic substances, metals or oxides will also be present, and their degradation and toxicity need to be studied. Stable biorobots could remain in the body as implants, monitoring the function of an organ, say.

Regulation lags behind research. Whereas active micromotors are far from being applied in clinics, some passive micro and nanoscale therapeutics have been approved. For example, silver nanoparticles are used as antibacterial wound dressings. Therapeutics that encapsulate drugs within cells or use cellular processes to modify genes or deliver drugs could be made more targeted and personalized, if more were known about their side effects.

LISTEN

Comment editor Joanne Baker explains what it would take to get microbots out of the lab and into our bodies.

You may need a more recent browser or to install the latest version of the Adobe Flash Plugin.

In the United States, live biotherapeutic products, including some vaccines, are regulated by the US Food and Drug Administration and must pass a barrage of tests in animals and humans. Blends of live and synthetic components will be harder to assess. Combinations of materials, microorganisms, microstructures and functions all need to be tested together in vivo.

Seeing further

Tracking the devices in vivo is crucial. Current imaging techniques, such as radiology, ultrasound, infrared and magnetic resonance imaging (MRI) are too coarse, insensitive and slow to find, let alone follow, micromotors operating deep within the body. The radioactive isotopes used in radiology and nuclear medicine are hazardous in high concentrations and when used for a prolonged time. Normal clinical MRI (with magnetic field strengths of up to 3 tesla) can resolve structures that are around 300 micrometres across — good enough to image blood vessels. Higher magnetic fields (10–12 tesla) can resolve 100 micrometres, but require expensive infrastructure. MRI scans take seconds to acquire and their resolution worsens when sequences are sped up.

“Combinations of materials, microorganisms, microstructures and functions all need to be tested together in vivo.”

A new method is called for. Ideally, it should be capable of imaging, in 3D, micromotors that are about 10 centimetres below the skin. It must resolve devices 1–50 micrometres across. And it must track them moving at minimum speeds of tens of micrometres per second — typical of bacteria or sperm — and ideally more to an accuracy of milliseconds for hours.

There are promising developments. Bioimaging researchers are manipulating light, sound and electromagnetic waves to minimize the two main effects that blur images: diffraction and scattering. Sensitivity and exposure times depend mainly on contrast. This can be enhanced by applying to the target cells or devices chemical agents that darken or fluoresce when stimulated (such as quantum dots). Ultrasound signals might be boosted through the use of small reflectors.

Combinations of these techniques look most encouraging, in our view. For example, Christian Wiest and his colleagues at iThera Medical in Munich, Germany, are developing multispectral optoacoustic tomography, which exploits the best attributes of infrared and ultrasound imaging. When laser pulses are fired at tissues, they expand and contract, giving off ultrasonic pressure waves that can be turned into a 3D image. These images have high contrast (governed by the absorption of light) and high spatial resolution (ultrasound scatters very little). Frequencies of light or ultrasound can be chosen to make certain molecules glow or darken. Such approaches can now reach resolutions of about 150 micrometres at depths of about 2–3 centimetres10. With focused research, they could become good enough to track microbots within a few years.

A bubble-propelled micromotor made of magnetic material stays in a loop when a rotating magnetic field is applied.

A. A. Solovev, Y. F. Mei, O. G. Schmidt, Leibniz IFW Dresden, Germany (2008)

Cutting-edge ultrasound methods are also improving rapidly. Holography — encoding a light field as an interference pattern in a photograph — is a promising concept for both imaging and control of microobjects11. And our research group is exploring whether the direction and velocity of microbots can be tracked by measuring the reflection, transmission or emission of certain frequencies of infrared light as a function of wavelength and time. Ultimately, several approaches may be needed.

Motoring forward

Over the next two years, the field needs to prepare for when the visualization systems become good enough to start testing and tracking active therapies in live animals.

Microbot researchers need to establish mechanisms for operating microbots, possibly even in swarms, inside the body. For example, ultrasound and magnetic fields could direct them broadly to the right region, from where finer, biochemical sensing would take over. The goal is a microbot that can sense, diagnose and act autonomously, while people monitor it and retain control in case of malfunction.

Research funders and universities need to support such cross-disciplinary work. Most of our activities are carried out within a nationwide priority programme called 'Microswimmers' that is funded by the DFG, one of Germany's main research-funding agencies.

“With a coordinated push, microbots could usher in an era of non-invasive therapies within a decade.”

Regulators and ethics panels should establish requirements for micromotor and biohybrid therapies. The long-term toxicity and immunoreactions of biodegradable materials and their functional coatings (such as metals, oxides and polymers) require exhaustive testing.

Clinicians should ask how these new materials and technologies should be harnessed to understand processes in the body and to design treatments. Which applications are most amenable to microbot therapies? How might microscopic tissue interventions actually be performed?

Regulatory restrictions mean that biohybrids will first be explored in lab-on-chip systems for biochemical sensing and immunoassay performance. But we have asked some clinicians how they see spermbots being used in their practices. Dunja Baston-Büst at Germany's University Hospital Düsseldorf, for instance, agrees that spermbots might be useful for delivering drugs or genes into the female reproductive tract to treat cancers or diseases of the oocyte. And Elkin Lucena from the Colombian Center of Fertility and Sterility (CECOLFES) in Bogotá thinks that if all the challenges can be overcome, microbot fertilization could eventually become an alternative to in vitro techniques such as injecting a sperm into an egg.

With a coordinated push, microbots could usher in an era of non-invasive therapies within a decade.

Journal name:
Nature
Volume:
545,
Pages:
406–408
Date published:
()
DOI:
doi:10.1038/545406a

References

  1. Guix, M., Mayorga-Martinez, C. C. & Merkoçi, A. Chem. Rev. 114, 62856322 (2014).

  2. Ma, X., Hortelão, A. C., Patiño, T. & Sánchez, S. ACS Nano 10, 91119122 (2016).

  3. Gao, W. et al. ACS Nano 9, 117123 (2015).

  4. Qiu, F. & Nelson, B. J. Engineering 1, 021026 (2015).

  5. Rao, K. J. et al. Small 11, 28362846 (2015).

  6. Martel, S., Mohammadi, M., Felfoul, O., Lu, Z. & Pouponneau, P. Int. J. Rob. Res. 28, 571582 (2009).

  7. Xu, H. et al. Preprint at https://arxiv.org/abs/1703.08510 (2017).

  8. Medina-Sánchez, M., Schwarz, L., Meyer, A. K., Hebenstreit, F. & Schmidt, O. G. Nano Lett. 16, 555561 (2016).

  9. Magdanz, V., Sanchez, S. & Schmidt, O. G. Adv. Mater. 25, 65816588 (2013).

  10. Deán-Ben, X. L., Gottschalk, S., Mc Larney, B., Shoham, S. & Razansky, D. Chem. Soc. Rev. 46, 21582198 (2017).

  11. Melde, K., Mark, A. G., Qiu, T. & Fischer, P. Nature 537, 518522 (2016).

Author information

Affiliations

  1. Mariana Medina-Sánchez is group leader of the Micro and Nano-biomedical Engineering Group at the Leibniz IFW in Dresden, Germany.

  2. Oliver G. Schmidt is director of the Institute for Integrative Nanosciences at the Leibniz IFW in Dresden, Germany. Oliver G. Schmidt is also Professor of Material Systems for Nanoelectronics at Technische Universität Chemnitz, Germany.

Corresponding authors

Correspondence to:

Author details

For the best commenting experience, please login or register as a user and agree to our Community Guidelines. You will be re-directed back to this page where you will see comments updating in real-time and have the ability to recommend comments to other users.

Comments for this thread are now closed.

Comments

Comments Subscribe to comments

There are currently no comments.

sign up to Nature briefing

What matters in science — and why — free in your inbox every weekday.

Sign up

Listen

new-pod-red

Nature Podcast

Our award-winning show features highlights from the week's edition of Nature, interviews with the people behind the science, and in-depth commentary and analysis from journalists around the world.