Despite constituting a widespread and significant environmental change, understanding of artificial nighttime skyglow is extremely limited. Until now, published monitoring studies have been local or regional in scope, and typically of short duration. In this first major international compilation of monitoring data we answer several key questions about skyglow properties. Skyglow is observed to vary over four orders of magnitude, a range hundreds of times larger than was the case before artificial light. Nearly all of the study sites were polluted by artificial light. A non-linear relationship is observed between the sky brightness on clear and overcast nights, with a change in behavior near the rural to urban landuse transition. Overcast skies ranged from a third darker to almost 18 times brighter than clear. Clear sky radiances estimated by the World Atlas of Artificial Night Sky Brightness were found to be overestimated by ~25%; our dataset will play an important role in the calibration and ground truthing of future skyglow models. Most of the brightly lit sites darkened as the night progressed, typically by ~5% per hour. The great variation in skyglow radiance observed from site-to-site and with changing meteorological conditions underlines the need for a long-term international monitoring program.
The introduction of artificial light has caused an unprecedented disruption to the nighttime environment over large areas of the Earth. Daily, seasonal, and lunar cycles of light that had previously been rather invariant for millennia have been dramatically altered by the spread of both public and private nighttime lighting, much of it associated with the global network of ~18 million kilometers of paved roads1. These changes have brought many human benefits, most importantly extending the hours available for productive work and social activity, but this gain has come at some cost. Artificial light at night has significant negative impacts for wildlife and ecosystems2,3,4,5,6, and evidence of deleterious consequences for human health and wellbeing continues to accumulate7,8,9,10.
Much recent attention has been paid to the impacts of exposure to direct emissions of artificial light at night11,12,13,14,15,16. In contrast, much less is known about the environmental consequences of indirect light exposure17. Light which is reflected or directly emitted upwards can be scattered back to Earth by atmospheric constituents, causing skyglow. This raises the overall background nighttime light level over vast areas, and can screen out celestial signals from individual stars18,19, the Milky Way20, and the polarization pattern of the moon21. The known and hypothesized effects of skyglow are diverse, and include changes to the time partitioning patterns of animals4,22; loss of key nighttime navigation signals for species23,24; changes in predator-prey relationships25,26; loss of human cultural experiences associated with naturally lit night skies and thought by some to be profound27; and difficulties with the siting and operation of astronomical telescopes28.
Until recently, understanding of typical levels and patterns of skyglow has been extremely poor. The invention of robust and easy to use light meters like the “Sky Quality Meter” (SQM; Unihedron), however, has resulted in a boom in skyglow measurement29,30,31,32,33,34,35,36,37,38,39,40. This has led to some understanding of patterns on a local scale, and emphasized the need for comparative studies across different regions. For example, sky radiance can have contrasting trends during a single night in nearby locations. The sky over a city often becomes progressively darker over the course of the night (Fig. 1A). In contrast, at nearby rural locations, the sky becomes brighter as the moon rises. Clouds play a key role in determining sky radiance in locations that are primarily artificially lit (Fig. 1B). Because water droplets are almost non-absorbing at visible wavelengths, clouds can return a large fraction of city light to the ground. Skyglow can vary extremely rapidly in urban locations as clouds pass over and then away from the site. On partly cloudy nights, skyglow is sometimes observed to switch rapidly between two levels as small clouds pass over the site29,30,37.
In this study, for the first time we bring together data obtained from SQMs at 44 sites around the globe to address four key questions about skyglow: 1) what levels of sky radiance are currently experienced worldwide, and how do these compare to the levels experienced under celestial light only? 2) do model-based predictions of skyglow on clear nights match the observational data? 3) is there a simple relation between the amplification of skyglow by clouds and the level of skyglow on clear days? 4) how do levels of skyglow change throughout the night?
Observed sky radiance
Night sky radiances were measured using SQMs during astronomical night (see methods). Radiance ranged over almost four orders of magnitude, from darkest values of 23.24 magSQM/arcsec2 at Kitt Peak, USA (1st percentile), to brightest values of 13.26 magSQM/arcsec2 at Schipluiden, Netherlands (99th percentile). In “natural sky units” (radiance relative to an assumed natural radiance of 21.6 magSQM/arcsec2, see methods), the range was 0.22–2200 NSU. Before the introduction of anthropogenic light, the radiance of a relatively large patch of sky near zenith on moon-free nights is likely to have been nearly always within the range 20 (galactic center near zenith) to 24 mag/arcsec2 (very thick clouds), or 0.1–4.3 NSU. The clear sky radiance at most sites was considerably larger than the typical signal expected from celestial sources alone (21.4–21.6 magSQM/arcsec2, 1–1.2 NSU), so from the viewpoint of stellar visibility, nearly all of the sites can be said to suffer from light pollution.
Artificial skyglow is approximately equal in radiance to natural sources at 20.85 magSQM/arcsec2 (NSU = 2). Anthropogenic skyglow dominated over celestial light on clear nights at midnight at 18 of the 22 sites for which cloud cover data were available (Table S3). The sky was brighter than 2 NSU more than 95% of the time at 30 sites. Remarkably, at 7 of these sites, the sky was at least 10 times brighter than natural 95% of the time.
Overcast moonlit nights provide an opportunity to compare artificial skyglow levels to an equivalent natural source of diffuse light. Moonlight increased the median radiance of the overcast (8 okta) night sky at each location examined (Table S4). This effect was very large at the sites with natural night skies (more than a factor of 10 at Schiermonnikoog, The Netherlands), but small (5–20%) at the brightest sites. At sites with little artificial skyglow, the rising moon rapidly brightened the overcast night sky, to a maximum of ~16 magSQM/arcsec2 at the unpolluted Schiermonnikoog site (Fig. S7). For comparison, Garstang41 predicted that on a cloudy night a full moon at 64° elevation would produce a maximum overcast sky radiance of about 15.5 magSQM/arcsec2. In contrast, at urban sites the lunar cycle was no longer visible on overcast nights, and the sky brightness instead mainly depended on cloud properties (Fig. S7).
Comparison of clear sky data to skyglow simulations
The World Atlas of Artificial Night Sky Brightness remains the only skyglow model with global coverage20. It was found to overestimate the sky brightness observed at the study sites by a factor of about 25% in NSU (Fig. 2, Table S3). After correcting for this, the standard deviation of the difference between the observed and estimated values was ~40% in NSU. These results are similar to those found in a recent study which compared handheld SQM observations by citizen scientists to the World Atlas36. Two likely sources of the relatively small difference between the data and model are differences in atmospheric transparency and bias due to snow cover in the satellite data used to produce the Atlas.
Relationship between overcast and clear sky radiance
Based on median midnight sky radiance, overcast skies were brighter than clear skies (Fig. 3, Table S3) at nearly all locations. The variation in skyglow radiance was larger on overcast nights than on clear nights at all sites (Table S5). In order to compare the radiance of clear and cloudy nights at sites lacking cloud coverage data, the 5th and 95th percentile of sky radiance observations for all locations were used (Fig. 4). Sites of similar character were again observed to cluster. The 5th percentile value is darker than the expected clear sky signal at a number of sites (NSU < 1), making it very likely that clouds darken the night sky at these sites.
The “brightening factor” (ratio of overcast to clear sky radiance) was calculated for each site, and tended to increase along a rural → urban gradient of increasing clear sky radiance (Table S3). There was a relationship between overcast and clear sky radiance, but it was not of the form o = ack (where o and c represent overcast and clear sky radiance). Instead, the relationship appears to be curved, with an inflection around 2–4 times the natural night sky brightness. The sites below this point are all rural or pristine. This suggests that the change in the relationship may be related to a transition from sites for which the lights from a distant city could be approximated as originating from a point source, to sites located nearer or within city limits.
Kocifaj and Solano Lamphar42 recently performed radiative transfer simulations to examine the relationship between the cloud brightening factor for irradiance and distance from a city center. They predicted that brightening factors increase rapidly as cities are approached, but are likely to decrease as the city boundary is crossed. In contrast, the largest brightening factors observed in the dataset were found near the centers of Plymouth, UK (17.6) and Berlin, Germany (16.2). While the differences in experimental design prevent a direct comparison, it is notable that an inflection occurs at the city boundary in both the observational and simulated data. These data allow a connection between theoretical and observational studies on large spatial scales for the first time, and future cooperation between experimentalists and theorists will allow rigorous testing of skyglow models.
Temporal change in sky radiance
In general, areas with little artificial skyglow tend to have little variation therein over the course of the night (Fig. 5A). In contrast, at brighter locations there is usually a visible trend towards decreasing radiance as the night progresses (Fig. 5B). At sites dominated by artificial light (NSU > 2), the median decrease in the artificial component of skyglow was found to be about ~5% per hour, both before and after midnight (Fig. S9 and Fig. S10).
This study has documented the remarkable extent to which the Earth's environment has been changed by the addition of artificial light. In this era of historically unprecedented light levels, lunar cycles are masked, clouds brighten the environment rather than darken it, and the early and late night are no longer physically equivalent. These changes mean that some light dependent processes that take place during crepuscular or moonlit periods (e.g. visual hunting) will be possible at night. Conversely, the darkness that was associated with cloudy nights before the anthropocene is no longer available as a resource (e.g. for adult insects emerging from water): only about one third of the sites experienced regular periods in which the sky was less than twice as bright as a natural starlit sky.
These observations are the most detailed study of night sky brightness ever reported, and yet represent just a snapshot of Earth's physical environment during a period of rapid change in artificial lighting. Street lighting is in a particularly dynamic phase due to technological development, budgetary demands, energy scarcity, and desired transition to more sustainable cities43,44,45. The establishment of an international network of sky brightness monitoring sites should be a high priority. In addition to improving understanding of this global environmental change, the data from such a network are crucially needed to test and improve the increasingly sophisticated skyglow models under development46,47,48. These models can then be used to interpolate into regions where monitoring is not taking place, which will greatly aid understanding of the diverse social and environmental costs of skyglow.
Measurement device and units
The SQM measures sky radiance in a cone of about 20° (full width at half maximum) in a spectral band that is similar, but not identical to, the visual band for which luminance is defined49,50. Measurements are taken in the logarithmic astronomical units of mag/arcsec2. The mag/arcsec2 scale is constructed so that a decrease of 5 in mag/arcsec2 corresponds to a factor of 100 increase in radiance. We follow the convention of Biggs32 and other authors and report all measurements in terms of the SQM spectral band magSQM/arcsec2. An approximate conversion to luminance is possible using the formula cd/m2 = 10.8 × 104 × 10−0.4x, where x is the radiance in magSQM/arcsec2. However, at artificially lit locations, the sky becomes redder with increasing cloud cover33,42, and this conversion would likely overestimate the luminance.
Since the mag/arcsec2 scale is not familiar to most readers, in many places the results are reported in “natural sky units” (NSU). A value in NSU indicates how much brighter or darker the sky is compared to a typical historic clear night sky. It is defined here as NSU = 100.4Δ, where Δ is 21.6 minus the observed value in magSQM/arcsec2.
Sky radiance data were collected by professional researchers and citizen scientists using 54 SQMs at 50 locations (in some cases the SQM was swapped or used in multiple locations). The observing sites were located in the USA (12), Netherlands (9), Germany (8), Italy (5), Canada (4), UK (3), Australia (2), Austria (2), Spain (2), Japan (1), Mexico (1), and Norway (1) (Tab. S1, Tab. S2). Data contributors classified their site as “urban”, “suburban”, “rural” (within 100 km of a city of 50,000 or more), or “pristine” (far from cities and almost no lighting within 50 km). While the locations sample a wide variety of artificial light regimes, from the entirely natural to the entirely urban, they are neither a random nor a representative sample of locations on Earth, and are almost exclusively located in developed countries.
Data were collected primarily in two periods, from 1 May 2011 to 30 September 2011, and 1 May 2012 to 30 September 2012, to avoid the influence of reduced foliage, and frost or snow on the observations. Some SQMs were installed or de-installed during the measurement period (e.g. to avoid monsoon seasons), and uptime was sometimes reduced due to problems such as readout computer or power failures (Tab. S2). Data from two sites in Australia were taken between 21 and 29 November 2011 (Alice Springs) and from 15 March to 29 April 2012 and 21 May to 1 October 2012 (Adelaide). Some subsamples of these data have been reported previously29,30,33,35,37,38, but this is the first time the datasets have been systematically contrasted with each other.
All devices were installed in a weatherproof housing and aimed at zenith. Results were corrected for the extinction coefficient; two sites are excluded from the analyses because it was unknown (Tab. S3). The manufacturer reports that unit-to-unit differences between SQMs result in a systematic uncertainty of 0.1 magSQM/arcsec2 (~10% in luminance), consistent with the differences observed in field campaigns51. Data were taken using SQM-LE, SQM-LU, and SQM-LU-DL devices. The devices are optically identical, and differ in how they are read out. The Ethernet connector of the SQM-LE produces some internal heating, but the light sensor has a known temperature dependence that is internally corrected before readout52.
Data were taken using a variety of different file formats, with different time references (e.g. UTC, local, and unix time). These were converted to a uniform format, and each group verified that the time was properly encoded for their site. To improve future data exchange, a standard format for reporting skyglow measurement was developed in consultation with skyglow researchers worldwide. The standard was officially adopted on 15 September 2012 at the 12th European Symposium for the Protection of the Night Sky53.
The sampling rate at the sites ranged from a minimum of 1 observation every 15 minutes to a maximum of 1 observation per second. To simplify the analysis, data from sites with sampling rates greater than one observation per minute were averaged to produce a minute-by-minute dataset. Two locations were affected by a software thresholding problem, in which data were not recorded when the sky was darker than 20 magSQM/arcsec2 (Tab. S3), and were not used in the analyses. Four additional locations were rejected from the analysis because they experienced SQM or setup failures that resulted in inconsistent data (Tab. S3). As a result, the total number of observing sites was reduced from 50 to 44.
The total amount of data from each site varied due to the sampling rate, the period over which the SQM was installed and working, and latitude. Data were rejected if the sun was not more than 18° below the horizon (astronomical night). With the exception of the moonlight cloudy night analysis, periods during which the moon was above the horizon were also rejected. To separate the effects of clouds and temporal changes in skyglow, some analyses restrict data to periods near to “midnight”. Here, midnight is defined as the hour that falls closest to the time when the sun reaches its deepest point below the horizon for each individual site. Depending on the observation's location relative to a time zone boundary and whether a community uses daylight savings time, “midnight” could be 23:00, 00:00, 01:00, or 02:00 in local time (e.g. in Berlin, “midnight” occurs at 01:00 local time).
Cloud coverage analysis
The analysis follows a method similar to that used by Kyba et al.29,33. Cloud coverage was obtained from SYNOP reports downloaded from the ogimet website for the SYNOP station nearest to the site (www.ogimet.com). This distance ranged from 3 to 112 km. SYNOP reports describe fractional cloud coverage in oktas, and only completely overcast (8 oktas) and completely clear (0 okta) conditions are considered. The clear and overcast sky radiances are defined as the median radiance observed within ±15 minutes of midnight under the given cloud condition.
Approximately half of the SYNOP stations did not provide hourly reports, so the cloud coverage analysis was not possible for these sites. To extend this analysis to include data from all sites, the relationship between brightness percentile and clear sky radiance at sites with SYNOP data was investigated. The 28th percentile was found to match the clear sky radiances the best, and the 81st percentile was found to match overcast sky radiances best. We also compared the 5th percentile in observed sky radiance (darkest nights) to the 95th percentile. For urban sites the 5th percentile occurs on clear nights, whereas for pristine locations, the 5th percentile likely occurs on overcast nights.
Comparison to World Atlas
The median sky radiance observed on cloud free nights was compared to the predictions of the “First World Atlas of Artificial Night Sky Brightness”20 for sites in Europe and North America. The georeferencing of the Atlas was known to be off by about a pixel, so it was newly georeferenced. Whereas the Atlas was calculated for nights with a fairly transparent atmosphere, nights with clear skies but high humidity or aerosol content would be included in our analysis. Additionally, the estimates in the World Atlas are for the Johnson V band, which is not the same as VSQM. Finally, the satellite data for some of the Northern latitude sites was mainly taken during winter periods.
Temporal radiance change analysis
Temporal change was studied in two ways. First, contour plots showing all of the moon-free night data were produced for each site (this technique was first published in Ref. 37, and was also independently presented earlier at workshops by den Outer.) Contours were calculated using Gaussian kernel estimation, and can be visually inspected for trends. Second, the sites found to be primarily artificially lit (20.85 magSQM/arcsec2 or brighter) were studied to find the rate of change in the artificial light component. The median observed clear sky radiance was found for these sites at intervals of ±15 minutes around each of 22:00, 00:00, and 02:00 (where 00:00 is “midnight” as described above). Radiances were converted to NSU, and the assumed natural background of 1 NSU was subtracted. The rate of change over each two hour interval was then calculated.
Overcast moonlit night analysis
The SQM is designed to measure a relatively uniformly lit field, and point-like sources such as the moon do not match this assumption. However, on completely overcast nights, the radiance of moonlight leaving the cloud base can be assumed to have little zenith dependence (similar to the overcast sky in daytime, see e.g. Ref. 54.) Contour plots of overcast sky radiance against moon elevation were produced for sites with SYNOP data (Fig. S6). To minimize any effect from temporal changes, only data taken within 15 minutes of midnight were considered. Note that this timing restriction introduces a relationship between lunar elevation and phase. Plots were only produced for sites with at least 40 data points, and at least one observation taken on a moonlit night.
We thank Dan Duriscoe for discussion of the the maximum naturally occuring night sky brightness, Liz Perkin for hosting the SQM at the Hackescher Markt site, Tine Weinzierl for hosting the SQM at the Seebergen site, and Veneto Stellato for sharing their data. This work was partially supported by MILIEU (FU Berlin), the Federal Ministry of Education and Research, Germany (PT-Jülich under grant BMBF-033L038A), EU COST Action ES1204 (Loss of the Night Network), the European Research Council (ERC) under the EU's Seventh Framework Program (FP7/2007-2013)/ERC grant agreement No 268504 to K.J.G., Spanish grant AYA2012-31277, AYA-2012-30717 and the Spanish Network for Light Pollution Studies (AYA2011-15808-E). Data collected at Winer Observatory funded in part by the National Aeronautics and Space Administration (Goddard Space Flight Center), the Ohio State University, University of Iowa, and The Adam Mickiewicz University.