How does network structure affect diffusion? Recent studies suggest that the answer depends on the type of contagion. Complex contagions, unlike infectious diseases (simple contagions), are affected by social reinforcement and homophily. Hence, the spread within highly clustered communities is enhanced, while diffusion across communities is hampered. A common hypothesis is that memes and behaviors are complex contagions. We show that, while most memes indeed spread like complex contagions, a few viral memes spread across many communities, like diseases. We demonstrate that the future popularity of a meme can be predicted by quantifying its early spreading pattern in terms of community concentration. The more communities a meme permeates, the more viral it is. We present a practical method to translate data about community structure into predictive knowledge about what information will spread widely. This connection contributes to our understanding in computational social science, social media analytics, and marketing applications.
Diseases, ideas, innovations, and behaviors spread through social networks1,2,3,4,5,6,7,8,9,10,11,12. With the availability of large-scale, digitized data on social communication13,14, the study of diffusion of memes (units of transmissible information) has become feasible recently15,16,17,18. The questions of how memes spread and which will go viral have recently attracted much attention across disciplines, including marketing6,19, network science20,21, communication22, and social media analytics23,24,25. Network structure can greatly affect the spreading process15,26,27; for example, infections with small spreading rate persist in scale-free networks8. Existing research has attempted to characterize viral memes in terms of message content22, temporal variation16,24, influential users19,28, finite user attention18,21, and local neighborhood structure10. Yet, what determines the success of a meme and how a meme interacts with the underlying network structure is still elusive. A simple, popular approach in studying meme diffusion is to consider memes as diseases and apply epidemic models3,4. However, recent studies demonstrate that diseases and behaviors spread differently; they have therefore been referred to as simple versus complex contagions, respectively9,29.
Here we propose that network communities30,31,32—strongly clustered groups of people—provide a unique vantage point to the challenge of predicting viral memes. We show that (i) communities allow us to estimate how much the spreading pattern of a meme deviates from that of infectious diseases; (ii) viral memes tend to spread like epidemics; and finally (iii) we can predict the virality of memes based on early spreading patterns in terms of community structure. We employ the popularity of a meme as an indicator of its virality; viral memes appear in a large number of messages and are adopted by many people.
Community structure has been shown to affect information diffusion, including global cascades33,34, the speed of propagation35, and the activity of individuals36,37. One straight-forward effect is that communities are thought to be able to cripple the global spread because they act as traps for random flows35,36 (Fig. 1(A)). Yet, the causes and consequences of the trapping effect have not been fully understood, particularly when structural trapping is combined with two important phenomena: social reinforcement and homophily. Complex contagions are sensitive to social reinforcement: each additional exposure significantly increases the chance of adoption. Although the notion is not new38, it was only recently confirmed in a controlled experiment9. A few concentrated adoptions inside highly clustered communities can induce many multiple exposures (Fig. 1(B)). The adoption of memes within communities may also be affected by homophily, according to which social relationships are more likely to form between similar people39,40. Communities capture homophily as people sharing similar characteristics naturally establish more edges among them. Thus we expect similar tastes among community members, making people more susceptible to memes from peers in the same community (Fig. 1(C)). Straightforward examples of homophilous communities are those formed around language or culture (Fig. 1(D,E)); people are much more likely to propagate messages written in their mother tongue. Separating social contagion and homophily is difficult41,42, and we interpret complex contagion broadly to include homophily; we focus on how both social reinforcement and homophily effects collectively boost the trapping of memes within dense communities, not on the distinctions between them.
To examine and quantify the spreading patterns of memes, we analyze a dataset collected from Twitter, a micro-blogging platform that allows millions of people to broadcast short messages (‘tweets’). People can ‘follow’ others to receive their messages, forward (‘retweet’ or “RT” in short) tweets to their own followers, or mention (‘@’ in short) others in tweets. People often label tweets with topical keywords (‘hashtags’). We consider each hashtag as a meme.
Communities and communication volume
Do memes spread like complex contagions in general? If social reinforcement and homophily significantly influence the spread of memes, we expect more communication within than across communities. Let us define the weight w of an edge by the frequency of communication between the users connected by the edge. Nodes are partitioned into dense communities based on the structure of the network, but without knowledge of the weights (see Methods). For each community c, the average edge weights of intra- and inter-community links, 〈w↻〉c and 〈w↶〉c, quantify how much information flows within and across communities, respectively. We measure weights by aggregating all the meme spreading events in our data. If memes spread obliviously to community structure, like simple contagions, we would expect no difference between intra- and inter-community links. By contrast, we observe that the intra-community links carry more messages (Fig. 2(A)). Similar results have been reported from other datasets35,37. In addition, by defining the focus of an individual as the fraction of activity that is directed to each neighbor in the same community, f↻, or in different communities, f↶, we find that people interact more with members of the same community (Fig. 2(B)). All the results are statistically significant () and robust across community detection methods (see Supplementary Information for additional details).
Meme concentration in communities
These results suggest that communities strongly trap communication. To quantify this effect for individual memes, let us define the concentration of a meme in communities. We expect more concentrated communication and meme adoption within communities if the meme spreads like a complex contagion. To gauge this effect, we introduce four baseline models. The random sampling model (M1) assumes equal adoption probability for everyone, ignoring network topology and all activity. The simple cascade model (M2) simulates the spreading of simple contagions43. The social reinforcement model (M3) employs a simple social reinforcement mechanism in addition to considering the network structure. In the homophily model (M4), users prefer to adopt the same ideas that are adopted by others in the same community. The simulation mechanisms of the four baseline models are summarized in Table 1.
We estimate the trapping effects on memes by comparing the empirical data with these models. Note that we only focus on new memes (see definition in Methods). Let us define the concentration of a meme h based on the proportions of tweets in each community. The usage-dominant community ct(h) is the community generating most tweets with h. The usage dominance of h, r(h), is the proportion of tweets produced in the dominant community ct(h) out of the total number of tweets T(h) containing the meme. We also compute the usage entropy Ht(h) based on how tweets containing h are distributed across different communities. The relative usage dominance and entropy are calculated using M1 as baseline. Analogous concentration measures can be defined based on users. Let g(h) be the adoption dominance of h, i.e., the proportion of the U(h) adopters in the community with most adopters. The adoption entropy Hu(h) is computed based on how adopters of h are allocated across communities. The higher the dominance or the lower the entropy, the stronger the concentration of the meme. All measures are computed only based on tweets containing each meme in its early stage (first 50 tweets) to avoid any bias from the meme's popularity.
Figures 3(A–D) demonstrate that non-viral memes exhibit concentration similar to (or stronger than) baselines M3 or M4, suggesting that these memes tend to spread like complex contagions. Note that models M2, M3, and M4 produce stronger concentration than random sampling (M1), because M2 incorporates the structural trapping effect in simple cascades, M3 considers both structural trapping and social reinforcement, and M4 captures both structural trapping and homophily.
Do all memes spread like complex contagions? While the majority of memes are not viral, viral memes are adopted differently. Their concentration in the empirical data is the same as that of the simple cascade model M2 (see the gray areas in Fig. 3(A–D)); community structure does not seem to trap successful memes as much as others. These memes spread like simple contagions, permeating through many communities.
Strength of social reinforcement
To further distinguish viral memes from others in terms of types of contagion, let us explicitly estimate the strength of social reinforcement. For a given meme h, we count the number of exposures that each adopter has experienced before the adoption and compute the average exposures across all adopters, representing the strength of social reinforcement on h, labelled as N(h). The exposures can be measured in terms of tweets Nt(h) or users Nu(h). We compute relative average exposures, , using only tweets at the early stages (first 50 tweets). If this quantity is large, adoptions are more likely to happen with multiple social reinforcement and thus the meme spreads like a complex contagion. As shown in Fig. 3(E–F), viral memes require as little reinforcement as the simple cascade model M2, while non-viral memes need as many exposures as M3 or M4. We arrive at the same conclusion: viral memes spread like simple contagions rather than like complex ones.
The above findings imply an intriguing possibility: high concentration of a meme would hint that the meme is only interesting to certain communities, while weak concentration would imply a universal appeal and therefore might be used to predict the virality of the meme. To illustrate this intuition about the predictive power of the community structure, we show in Fig. 4 how the diffusion pattern of a viral meme differs from that of a non-viral one, when analyzed through the lens of community concentration.
Let us therefore apply a machine learning technique, the random forests classification algorithm, to predict meme virality based on community concentration in the early diffusion stage. We employ two basic statistics based on early popularity and three types of community-based features in the prediction model, listed below.
Basic features based on early popularity. Two basic statistical features are included in the prediction model. The number of early adopters is the number of distinct users who generated the earliest tweets. The number of uninfected neighbors of early adopters characterizes the set of users who can adopt the meme during the next step.
Infected communities. The simplest feature related to communities is the number of infected communities, i.e., the number of communities containing early adopters.
Usage and adoption entropy. Ht(h) and Hu(h) are good indicators of the strength of meme concentration, as shown in Fig. 3.
Fraction of intra-community user interactions. We count pair-wise user interactions about any given meme, and calculate the proportion that occur between people in the same community.
Our method aims to discover viral memes. To label viral memes, we rank all memes in our dataset based on numbers of tweets or adopters, and define a percentile threshold. A threshold of θT or θU means that a meme is deemed viral if it is mentioned in more tweets than θT% of the memes, or adopted by more users than θU% of the memes, respectively. All the features are computed based on the first 50 tweets for each hashtag h. Two baselines are set up for comparison. Random guess selects nviral memes at random, where nviral is the number of viral memes in the actual data. Community-blind prediction employs the same learning algorithm as ours but without the community-based features. We compute both precision and recall for evaluation; the former measures the proportion of predicted viral memes that are actually viral in the real data, and the latter quantifies how many of the viral memes are correctly predicted. Our community-based prediction excels in both precision and recall, indicating that communities are helpful in capturing viral memes (Fig. 5). For example, when detecting the most viral memes by users (θU = 90), our method is about seven times as precise as random guess and over three times as precise as prediction without community features. We achieve a recall over 350% better than random guess and over 200% better than community-blind prediction. Similar results are obtained using different community detection methods or different types of social network links (see SI).
Despite the vast and growing literature on network communities, the importance of community structure has not been fully explored and understood. Our findings expose an important role of community structure in the spreading of memes. While the role of weak ties between different communities in information diffusion has been recognized for decades35,36, we provide a direct approach for translating data about community structure into predictive knowledge about what information will spread virally. Our method does not exploit message content, and can be easily applied to any socio-technical network from a small sample of data. This result can be relevant for online marketing and other social media applications.
Further analyses of network community structure in relation to social processes hold potential for characterizing and forecasting social behavior. We believe that many other complex dynamics of human society, from ethnic tension to global conflicts, and from grassroots social movements to political campaigns17,44,45, could be better understood by continued investigation of network structure.
We collected a 10% sample of all public tweets from Mar 24 to Apr 25, 2012 using the Twitter streaming API (dev.twitter.com/docs/streaming-apis). Only tweets written in English are extracted. The dataset comprises 121,807,378 tweets generated by 14,599,240 unique users, and containing at least one of 10,393,465 hashtags. We then constructed an undirected, unweighted network based on reciprocal following relationships between 595,460 randomly selected users, as bi-directional links reflect more stable and reliable social connections. Such a conservative choice to exclude information about direction and weights of links makes the approach more generally applicable to cases where static data about the social network is more readily available than dynamic data about information flow. Two other types of networks constructed on the basis of retweets and mentions were also tested for robustness (see extended analyses in SI).
We apply Infomap31, an established algorithm to identify the community structure. To ensure the robustness of our results, we perform the same analyses using another widely-used but very different community detection method, link clustering32. The results are similar (see details in SI). The network remains unweighted for community identification, to focus purely on the connection structure.
For quantifying meme concentration in communities and the strength of social reinforcement, we focus on new memes that emerged during our observation time window. New memes are defined as those with fewer than 20 tweets during the previous month (Feb 24 – Mar 23, 2012). A sensitivity test of our results with respect to hashtag filtering criteria is available in SI.
To replicate the Twitter API sampling effect in the baseline models, each simulation runs until 10 times more tweets are generated than the empirical numbers. Then, we select 10% of the tweets at random. Every simulation is repeated 100 times and the 10%-sampling is repeated 10 times on each simulation outcome. Thus, the average values of the measures from our toy models are computed across 100 × 10 samples.
In prediction, we use the random forest algorithm, an ensemble classifier that constructs 500 decision trees46. Each decision tree is trained with 4 random features independently and the final prediction outcomes combine the outputs of all the trees. The good performance of the random forest model benefits from the assumption that an ensemble of “weak learners” can form a “strong learner.” For training and testing, we employ 10-fold cross validation.
We thank Albert-László Barabási, Haewook Kwak, James P. Bagrow, Cosma Rohilla Shalizi, Yang-Yu Liu, Sune Lehmann, and Sue Moon for helpful discussions and comments on earlier versions of this manuscript, and Yangyi Chen for help on using FutureGrid clusters for processing large-scale data. This manuscript is based upon work supported in part by the James S. McDonnell Foundation and the National Science Foundation under Grants No. 0910812 and 1101743. While finalizing this manuscript, we have been made aware of a related paper developed independently by D.R. Romero, C. Tan, and J. Ugander47.
About this article
Rights and permissions
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareALike 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/
To obtain permission to re-use content from this article visit RightsLink.