Abstract
Density functional M11 was used to study the mechanism and enantioselectivity of a binaphthophosphepine-catalyzed intramolecular [3 + 2] cycloaddition reaction. The computational results revealed that this reaction proceeds through nucleophilic addition of the phosphine catalyst to the allene, which yields a zwitterionic phosphonium intermediate. The subsequent stepwise [3 + 2] annulation process, which starts with the intramolecular nucleophilic addition of the allenoate moiety to the electron-deficient olefin group, determines the enantioselectivity of the reaction. This step is followed by a ring-closing reaction and water-assisted proton-transfer process to afford the final product with concomitant regeneration of the phosphine catalyst. Theoretical predictions of the enantioselectivity for various phosphine catalysts were consistent with experimental observations, and 2D contour maps played an important role in explaining the origin of the enantioselectivity. Moreover, on the basis of our theoretical study, new binaphthophosphepine catalysts were designed and that are expecting to afford higher enantioselectivity in this cycloaddition reaction.
Similar content being viewed by others
Introduction
The development of organocatalysis, which contain no transition metals, is of prime interest because of the extensive applications of these species in organic synthesis1,2,3,4,5,6,7. Among various organocatalysts, phosphine catalysis has become a powerful tool for the construction of carbocycles, heterocycles, functionalized spirocyclic, and fused ring systems, which have found broad synthesis applications on bioactive natural products and medicinally important substances8,9,10,11,12,13. Organic phosphine catalysts have been studied for more than half a century with pioneering works involving their use in Wittig reaction14,15,16, Morita–Baylis–Hillman reaction17,18,19, Rauhut–Currier reaction20, 21, Lu reaction22,23,24,25, Michael reaction26,27,28, and some other umpolung reactions29,30,31. Although diversified substrates and product structures in these reactions, from a mechanistic point of view, they are all initiated by nucleophilic addition of the lone pair of a phosphine to yield a phosphonium intermediate32,33,34,35. On the other hand, phosphonium species is also a good leaving group and can be easily regenerated; this is critical for the continuous operation of the catalytic cycle36, 37. In particular, the phosphine-catalyzed [3 + 2] cycloaddition of allenes with unsaturated bonds, known as the Lu reaction, provides an efficient approach for the construction of five-membered carbocycles owing to the mild reaction conditions, high product yield, and high atom economy38,39,40,41.
Triphenylphosphine is the most common catalyst for phosphine-catalyzed [3 + 2] cycloadditions because of its easy availability, low cost, and high catalytic activity42,43,44,45. In addition, high enantioselectivity and/or diastereoselectivity can be achieved by the introduction of asymmetric trisubstituted phosphines46,47,48,49,50. As a result of the broad application of this catalyst in the construction of five-membered carbocycles, the mechanism of this [3 + 2] cycloaddition has attracted considerable attention by both theoretical and experimental chemists34, 51,52,53,54. In Huisgen-type [3 + 2] cycloadditions, Lewis acids generally act as catalysts to activate 1,3-dipoles so that they could react with dipolarophiles55,56,57,58,59. However, Lu22,23,24,25, Fu60, 61, Zhang62, and others47, 63,64,65,66 have independently reported [3 + 2] cycloadditions in which a phosphine catalyst plays the role of a Lewis base. The generally accepted mechanism of phosphine-catalyzed [3 + 2] cycloaddition starts with a zwitterionic phosphonium intermediate, which is formed by the nucleophilic addition of the phosphine catalyst to an allene species. Subsequent [3 + 2] cycloaddition between the zwitterionic phosphonium intermediate and an electron-deficient unsaturated bond then occurs to yield a phosphorus ylide. Previous theoretical investigations have proposed that this is a stepwise process51, 53. A solvent-assisted [1,2]-proton transfer leads to the formation of a cycloadduct, and finally the active phosphine catalyst is released.
It has recently been shown that using a chiral phosphine greatly extends the potential applications of phosphine-catalyzed [3 + 2] cycloadditions to the construction of asymmetric cyclopentenes52, 67,68,69. In contrast to previous theoretical and experimental studies on symmetric phosphine-catalyzed [3 + 2] cycloadditions, the mechanism of chiral phosphine-catalyzed [3 + 2] cycloaddition remains unclear, especially the origin of the chirality in the product. A good example of a chiral phosphine catalyst is binaphthophosphepine, which was first proposed and synthesized by Gladiali et al.70; this compound is extensively used as a ligand or organic catalyst in asymmetric synthesis owing to its strong chiral induction71,72,73,74,75. As shown in Fig. 1, Fu and coworkers have reported the enantioselective intramolecular [3 + 2] cycloaddition of allene 2 to generate chiral [3.3.0] bicyclic products 3 using a series of binaphthophosphepines as catalysts76. This reaction occurs under mild conditions with good yields. When chiral binaphthophosphepine (S)-1, designed by Fu’s group, was used in the intramolecular [3 + 2] annulation of racemic allenes, the observed ee was as high as 98%. Owing to the potential for the widespread application of this type of reactions and the rapid development of phosphine organocatalysis, the detailed study of the reaction mechanism is desired, especially on the origin of the enantioselectivity and the conversion pathway of the racemic reactants. We therefore performed density functional theory (DFT) calculations to reveal the reaction mechanism and the origin of the enantioselectivity in this annulation. Moreover, the design of new binaphthophosphepines based on theoretical predictions is also discussed.
Binaphthophosphepine-catalyzed enantioselective intramolecular [3 + 2] cycloaddition.
Computational Methods
All calculations were performed with Gaussian 09 program77. Geometry optimization of the minimum energy structures and transition states was carried out at the B3-LYP78, 79 level of theory with the 6-31G(d) basis set. Harmonic vibrational frequency calculations were performed for all stationary points to identify whether they were local minima or transition structures, and to derive the thermochemical corrections for the enthalpies and free energies. Solvent effect in toluene were considered implicitly by performing single-point energy calculations on the gas-phase optimized geometries using the SMD80 polarizable continuum model. Solvation single-point energies were obtained using the M1181,82,83,84,85 functional with the 6-311+G(d,p) basis set for all other atoms. Intrinsic reaction coordinate (IRC) calculations of key step were used to confirm that the transition states connected the corresponding reactants and products. The natural bond orbital (NBO) technique was applied to calculate the Wiberg bond indices to analyze the bonding86.
Results and Discussion
Based on previous theoretical and experimental studies, the proposed reaction pathways for the binaphthophosphepine-catalyzed enantioselective intramolecular [3 + 2] cycloaddition of racemic allene 2 are shown in Fig. 2. The initiation step of this reaction is the nucleophilic addition of binaphthophosphepine catalyst I with the (R)-2 enantiomer to generate zwitterionic phosphonium intermediate II, which has a gauche conformation. Nucleophilic addition is also possible with the other enantiomer (S)-2 to yield regioisomer V, and isomerization between II and V occurs through C–C bond rotation. After intermediate II is formed, another nucleophilic addition occurs to form the first new C–C bond in intermediate III. It is believed that the enantioselectivity is controlled by this step. Subsequent cyclization generates five-membered carbocycle intermediate IV, and finally water-assisted [1,2]-proton transfer leads to the generation of cycloadduct 3 and the regeneration of active phosphine catalyst I. Alternatively, intermediate II may be isomerized to intermediate V, and a similar process from intermediate V also yields cycloadduct 3.
The proposed mechanism of binaphthophosphepine-catalyzed enantioselective intramolecular [3 + 2] cycloaddition of racemic allene (±)-2.
However, in the proposed mechanism, there are still some issues that remain unclear: (1) the consistency of (or differences in) the reaction pathway when using different enantiomers (e.g., (R)-2 and (S)-2), and (2) the factors controlling the enantioselectivity in the [3 + 2] cycloaddition step. We thus performed DFT calculations to solve these problems and reveal the mechanism of this reaction.
In our theoretical study, binaphthophosphepine (S)-1 was selected as the model catalyst, and racemic complex CP2 was chosen as the reactant. Our theoretical investigations first focused on the nucleophilic addition step. As shown in Fig. 3, the nucleophilic addition of binaphthophosphepine (S)-1 to the β position of (R)-CP2 takes place via transition state TS1 and has a free energy barrier of 22.9 kcal/mol. This nucleophilic addition reversibly affords intermediate CP3 with a gauche conformation, with 9.3 kcal/mol endothermic. The C2–C3 bond length in CP3 is 1.44 Å (Fig. 4), which is much longer than a typical C=C double bond. The NBO analysis of intermediate CP3 also shows that the NBO bond order of the C2–C3 bond is only 1.06. This bond can therefore rotate via transition state TS2 with a barrier of only 9.9 kcal/mol to reversibly generate intermediate CP4.
Free energy profiles for the nucleophilic addition step of binaphthophosphepine-catalyzed intramolecular [3 + 2] annulation (E1 = CO2Bn, E2 = CO2Me). Values are given by kcal/mol and represent the relative free energies calculated by M11 method in toluene solvent. The values in geometry information are given by angstrom.
(a) Electrostatic potential map for CP3 (left) and CP4 (right). (b) Geometries of Intermediates CP3 (left) and CP4 (right). The values of bond lengths are given in angstroms.
We found that intermediate CP3 is 2.4 kcal/mol more stable than CP4. An electrostatic potential (ESP) calculation was used to clarify the energy difference between CP3 and CP4. As shown in the ESP maps in Fig. 4, for both intermediates CP3 and CP4, the positive charge (cool tones) is located on the phosphonium moiety, and the center of the negative charge (warm tones) is on the electron-withdrawing group in the terminal position of the allenoate moiety. In CP4, the electron-withdrawing group is far away from the phosphonium moiety, and this charge separation probably leads to the higher relative free energy of CP4. Meanwhile, the existence of A1,3 strain in CP4 also results in the instability of CP4.
When intermediate CP4 is formed, P–C2 bond cleavage can occur via transition state TS3 to afford the reactant with the S-configuration (S)-CP2 and release catalyst (S)-1. The theoretical calculations indicate that the binaphthophosphepine catalyst could promote the inversion of the configuration of reactant CP2. Interestingly, based on the principle of microreversibility, nucleophilic addition of binaphthophosphepine (S)-1 with (S)-CP2 could also occur via the same transition state TS3 with a barrier of 24.9 kcal/mol to reversibly yield the zwitterionic phosphonium intermediate CP4 common to both steps. The subsequent [3 + 2] cycloaddition could start from either CP3 or CP4. The relative free energy of transition state TS1 is 2.0 kcal/mol lower than that of transition state TS3, which indicates that nucleophilic addition to (R)-CP2 is easier than that to its enantioisomer (S)-CP2. Therefore, if the reaction were stopped partway through, more unreacted (S)-CP2 would be observed. The computed ee value of the unreacted allene is 93%, which is in good agreement with experimental observations.
For the subsequent [3 + 2] cycloaddition from CP3 or CP4, both concerted and stepwise mechanisms have been considered. The computational results for the stepwise [3 + 2] cycloaddition pathway starting from CP3 are summarized in Fig. 5. The ESP map showed that the positive charge is mainly located on the internal carbon of the electrophile moiety in CP3 (Fig. 4). Therefore, the first intramolecular C–C bond formation occurs via transition state TS4 to reversibly yield carbon anionic intermediate CP5. The relative free energy of transition state TS4 is 2.6 or 4.6 kcal/mol lower than those of transition states TS1 or TS3, respectively. Therefore, the previous nucleophilic addition step is expected to be the rate limiting step. After zwitterionic intermediate CP5 is formed, the following cycloaddition exothermically generates phosphorus ylide CP6 via transition state TS5, which has a barrier of only 1.2 kcal/mol. The rotation of the C–P bond in CP3 is blocked by the bulky phosphonium moiety when (S)-1 is used as the catalyst; it is therefore favorable for intramolecular electrophilic attack to occur on the re-face of the allene moiety via transition state TS4. In contrast, additional energy is required to rotate the C–P bond for the subsequent si-face attack on the allene moiety via transition state TS7. The calculated activation free energy via TS4 is 4.7 kcal/mol lower than that via TS7. This corresponds to a binaphthophosphepine catalyst-induced diastereoselectivity of 1:199, which indicates an ee of 99.9% for the final product. This calculated enantioselectivity is consistent with the experimental results. As shown in Fig. 5, the first C–C bond formation is the critical step for the stereospecificity of the reaction. A relatively stable phosphorus ylide (CP6 or CP9) is generated after the second electrophilic addition to the vinylphosphonium moiety, and the new five-membered ring is constructed after this step. Additionally, when the carbon anion is formed in CP5, the bond order of the olefin moiety is reduced, which indicates that this bond may be rotated. Unfortunately, the activation barrier for this rotation via transition state TS6 is 16.0 kcal/mol (red line), which is much higher than that of the ring-closing step. Therefore, threo-cycloadduct CP7 could not be formed. This result is consistent with experimental observations, and also rationalizes our proposed stepwise mechanism.
Free energy profiles for the [3 + 2] cycloaddition step of binaphthophosphepine-catalyzed intramolecular annulation from intermediate CP3 (E1 = CO2Bn, E2 = CO2Me). Values are given by kcal/mol and represent the relative free energies calculated by M11 method in toluene solvent. The values in geometry information are given by angstrom.
Annulation is the key step of binaphthophosphepine-catalyzed intramolecular [3 + 2] cycloaddition reaction. To exclude the concerted mechanism, a 2D potential energy surface calculation is performed at B3-LYP level of theory87,88,89. The reaction pathway is labeled in Fig. 6. The C1 and C2 atoms are closed first. When the distance of C1-C2is reduced to 2.06 Å, the first saddle point, which is transition state TS4, is found. Followed the reaction coordination, when the bond length of C1-C2 is shorter than 1.8 Å, the distance of C3 and C4 atoms begin to reduce evidently. When the distance of C3 and C4 atoms is 2.59 Å, a local minimum, which is named CP5 is formed. When C3 and C4 atoms is further closed to 2.48 Å, another saddle point TS5 is found. Throw over that saddle point, the relative free energy is reduced rapidly as well as the generation of the annulation intermediate CP6. Around the 2D potential energy surface, two saddle points and three local minima are found. Therefore, the concerted pathway could be excluded.
The 2D potential energy surface for the annulation step of binaphthophosphepine-catalyzed intramolecular [3 + 2] cycloaddition reaction calculated by B3-LYP level of theory (E1 = CO2Bn, E2 = CO2Me). The relative energies for the surface are given in kcal/mol. The bond axes are given in angstrom. The relative zero is the electronic energy of CP3.
The [1,2]-proton shift in phosphorus ylide to afford cyclopentene product has been previously studied by the Yu group51, 53. Their theoretical and experimental investigations suggested a stepwise water-facilitated proton transfer that involved protonation by water to yield a phosphonium intermediate followed by deprotonation. We also considered this step in the binaphthophosphepine-catalyzed intramolecular annulation in our theoretical studies. As shown in Fig. 7, the direct [1,2]-proton shift via transition state TS13 cannot occur after intermediate CP6 is formed owing to the very high activation free energy (42.5 kcal/mol). Nevertheless, promotion with water would considerably reduce the barrier of this step. Accordingly, we located a concerted water-molecule-bridged [1,2]-proton transfer transition state, named TS9, in the free energy profiles. After this transition state, the phosphonium moiety is decomposed to yield final product CP13 and regenerate active catalyst CP1. Alternatively, stepwise water-facilitated proton transfer may start from the protonation of the phosphorus ylide via transition state TS10 to reversibly yield hydroxyphosphorane intermediate CP11 with an energy barrier of only 12.6 kcal/mol. It is followed by deprotonation via transition state TS11 to generate zwitterionic phosphonium intermediate CP12, which is then decomposed to the same product CP13 and regenerates active catalyst CP1. The relative free energy of stepwise water-facilitated proton transfer transition state TS11 is only 0.1 kcal/mol higher than that of concerted water-molecule-bridged [1,2]-proton transfer transition state TS9; therefore, both the water-facilitated concerted and stepwise pathways for the [1,2]-proton transfer step are possible.
Free energy profiles for the [1,2]-proton shift process (E1 = CO2Bn, E2 = CO2Me). Values are given by kcal/mol and represent the relative free energies calculated by M11 method in toluene solvent. The values in geometry information are given by angstrom.
Stepwise [3 + 2] cycloaddition starting with intermediate CP4 was also considered (Fig. 8). Although the relative free energy of intermediate CP4 is 2.4 kcal/mol higher than that of intermediate CP3, the relative free energy of the transition state for nucleophilic addition (TS14) is nearly the same as that of TS4. Thus, if the initial nucleophilic addition occurs via transition state TS1 to yield intermediate CP3, an alternative pathway, besides the direct stepwise [3 + 2] cycloaddition via transition state TS4, is isomerization to another zwitterionic phosphonium intermediate CP4 followed by [3 + 2] annulation via transition state TS14. On this pathway, ring closing via transition state TS15 would yield another phosphorus ylide CP15, which is the epimer of CP6. Subsequent proton transfer and release of the binaphthophosphepine catalyst from CP15 would generate CP13 as the final product, which is the same product as that obtained from intermediate CP6. The detailed free energy profiles for the protonation of CP15 are summarized in the Supporting Information (Figure S1).
Free energy profiles for the [3 + 2] cycloaddition step from intermediate CP4 (E1 = CO2Bn, E2 = CO2Me). Values are given by kcal/mol and represent the relative free energies calculated by M11 method in toluene solvent.
More than just a tool for mechanistic investigation, quantum chemical calculations can also be used for the evaluation of new reactions and catalyst designs90, 91. To understand and improve the enantioselectivity of the binaphthophosphepine-catalyzed intramolecular annulation reaction, we carried out a computational experiment to investigate the effects on stereo induction of phosphine catalysts with various substituents (Fig. 9). Our DFT studies of the reaction mechanism revealed that the enantioselectivity determining step of this reaction is the intramolecular nucleophilic addition of the electron-deficient olefin moiety, which forms the first C–C bond. Based on this idea, the enantioselectivity was evaluated from the relative free energy differences between the transition states for re- and si-face attack, as shown in Table 1. In our theoretical studies of enantioselectivity, we first considered binaphthophosphepine (S)-1 with substituent groups that have already been used experimentally. The R2 and R3 groups in (S)-1a are phenyl and 3,5-dimethoxyphenyl, respectively, and the calculated ΔΔG ≠ was 4.7 kcal/mol (entry 1), which indicates an ee value of 99.9%.
The phosphine catalysts with a series of various substituents.
When the R3 group was changed to a phenyl group in catalyst (S)-1b, the calculated ΔΔG ≠ was reduced to 4.0 kcal/mol (entry 2). Furthermore, when the R2 group was replaced by a hydrogen atom (entry 3, catalyst (S)-1c), the calculated ΔΔG ≠ was 2.7 kcal/mol. To further verify the accuracy of our computational results, we also calculated the enantioselectivity using (S)-1d as the catalyst, in which the R3 group is a tert-butyl group. The calculated ee was opposite to that obtained for (S)-1a and equal to −96.6%, which fully agrees with the experimental observations. A comparison of the experimentally observed and theoretically calculated enantioselectivities of catalysts (S)-1a, (S)-1b, (S)-1c, and (S)-1d is given in Fig. 10, and shows a good linear correlation between the calculated activation free energy difference and the corresponding energy values derived from the experimentally observed ee (correlation coefficient R2 = 0.98). The results clearly show that DFT calculations demonstrate the same trend in enantioselectivity as do the experimental results, although every calculated value is slightly higher than the experimentally reported data as a result of systematic error. Both the theoretical calculations and experimental observations confirmed that increasing the size of the R2 and R3 groups would lead to higher enantioselectivity.
To better illustrate the steric repulsion in different regions of the binaphthophosphepine catalysts, a 2D contour map along the z-axis of the van der Waals surface of catalyst (S)-1a was plotted92,93,94,95, which is shown in Fig. 11a. The optimized structures of transition states TS4 and TS7 for the C–C bond formation are also shown (Fig. 11b). The 2D contour map clearly shows that the axial phenyl group on the binaphthalene moiety provides the greatest steric hindrance; this group points toward the reactant and would be parallel with the reacting allenoate moiety. The 3,5-dimethoxyphenyl group is approximately parallel with the horizontal plane of the molecule and far from the reactant. However, the two hydrogen atoms in one of the methylene groups of the phosphepine moiety point toward the reactant. Therefore, the changes in enantioselectivity can mainly be attributed to the different steric repulsion between these two hydrogen atoms and the reactant. The geometries of transition states TS4 and TS7 further confirmed this proposal. In transition state TS7, the H3 atom in the reactant was found to be very close to the H1 and H2 atoms in the phosphepine moiety of the catalyst, with H1···H3 and H2···H3 distances of 1.95 and 2.52 Å, respectively. In contrast, the H1–O1 and H2–O2 bond lengths in the catalyst are 1.95 and 2.46 Å, respectively, which clearly indicates a weak hydrogen-bonding interaction.
(a) 2D contour map of the Van der Waals surface of catalyst ( S )-1a. Distances are given in angstroms. P atom is located at the origin of the coordinate system in the contour map. The contour line of zero is defined as in the same plane of the P atom. Negative distance (blue) indicates that the atoms on the ligand are farther away from the substrate; positive distance (red) indicates that the atoms on the ligand are closer to the substrate. (b) Geometries of transition states TS-4 and TS-7 with catalyst ( S )-1a. The values of bond lengths are given in angstroms.
We also considered the 2D contour map of catalyst (S)-1d (Fig. 12a). Without the steric hindrance of the axial phenyl group, the allenoate could rotate to avoid repulsive interactions with the methylene group of the phosphepine moiety. In contrast, the tert-butyl group in (S)-1d is much larger than 3,5-dimethoxyphenyl group in (S)-1a, which suggests that the tert-butyl will offer greater steric hindrance. The arrangement of the steric hindrance around the phosphine is thus changed, which leads to the inverse enantioselectivity. In transition state TS4d (Fig. 12b), the H3 atom in the allenoate moiety is close to the H1 and H2 atoms in the tert-butyl group of binaphthophosphepine catalyst (S)-1d, which implies that there is steric repulsion between the reactant and the catalyst. However, in transition state TS7d, the atom closest to the H1 and H2 atoms in the catalyst is an oxygen atom. Therefore, transition state TS4d is energetically disfavored. These 2D contour maps provide a straightforward explanation for the enantioselectivities observed in the asymmetric syntheses of fused ring systems through phosphine-catalyzed intramolecular [3 + 2] annulation reactions.
(a) 2D contour map of the Van der Waals surface of ligand ( S )-1d. Distances are given in angstroms. P atom is located at the origin of the coordinate system in the contour map. The contour line of zero is defined as in the same plane of the P atom. Negative distance (blue) indicates that the atoms on the ligand are farther away from the substrate; positive distance (red) indicates that the atoms on the ligand are closer to the substrate. (b) Geometries of transition states TS-4d and TS-7d with catalyst ( S )-1d. The values of bond lengths are given in angstroms.
Based on our theoretical calculations and previous experimental studies, we found that enlarging the size of substituent groups R2 and R3 in binaphthophosphepine catalyst (S)-1 resulted in higher enantioselectivities. We therefore designed some new binaphthophosphepine catalysts to further test this hypothesis. As shown in Table 1 (entry 5), changing R2 to a 3,5-diisopropylphenyl group increased the calculated ΔΔG ≠ to 5.4 kcal/mol. In another example, the R3 group was changed to the 3,5-diisopropylphenyl group (entry 6), and in this case the ΔΔG ≠ was calculated to be 5.9 kcal/mol. The regression equation shown in Fig. 10 showed that the expected experimental ee of these two catalysts was 97.9% and 98.5%, respectively. Interestingly, when we changed R2 to an anthracenyl group, the calculated ΔΔG ≠ was as high as 7.3 kcal/mol, which gives an extrapolated experimental ee of 99.6%. We hope that our predictions will be validated in future experiments.
Conclusion
In summary, a theoretical study was conducted to reveal the mechanism of phosphine-catalyzed diastereoselective intramolecular [3 + 2] annulations that generate fused ring systems. DFT calculations showed that the reaction proceeds through a nucleophilic addition step that yields a zwitterionic intermediate. There is a low potential energy barrier for the conversion of this zwitterionic intermediate to its geometric isomer, which means that the racemic reactant is converted to the stable gauche isomer. The subsequent stepwise [3 + 2] annulation starts with intramolecular nucleophilic addition of the allenoate moiety to the electron-deficient olefin group. The ring-closing reaction then irreversibly yields a phosphorus ylide. The enantioselectivity originates from the first step of the [3 + 2] cycloaddition and is a result of the noticeable disparity in activation free energy for the different attack orientations. Proton transfer is accomplished through a water-assisted direct [1,2]-proton transfer process, which has been confirmed to be either a concert or a stepwise pathway. In addition, based on the structural and thermodynamic studies described above, we performed theoretical calculations on a series of chiral binaphthophosphepine catalysts with the aim of improving the enantioselectivity of [3 + 2] annulations using quantum-chemical methods. The theoretically predicated ee values for the experimentally reported binaphthophosphepine catalysts agree well with the experimental observations, which could be explained by steric effects using 2D contour maps. Based on our results, we also designed three new binaphthophosphepine catalysts that are expecting to give higher enantioselectivity in phosphine-catalyzed [3 + 2] cycloadditions. We believe that our study of substituent effects could provide further insight for the design and selection of binaphthophosphepine catalysts, and thus improve the enantioselectivity in this type of reactions.
References
Volla, C. M., Atodiresei, I. & Rueping, M. Catalytic C-C bond-forming multi-component cascade or domino reactions: pushing the boundaries of complexity in asymmetric organocatalysis. Chem. Rev. 114, 2390–2431 (2014).
Palomo, C., Oiarbide, M. & Lopez, R. Asymmetric organocatalysis by chiral Bronsted bases: implications and applications. Chem. Soc. Rev. 38, 632–653 (2009).
List, B. Introduction: Organocatalysis. Chem. Rev. 107, 5413–5415 (2007).
Dalko, P. I. & Moisan, L. In the golden age of organocatalysis. Angew. Chem Int. Ed. 43, 5138–5175 (2004).
Dalko, P. I. & Moisan, L. Enantioselective Organocatalysis. Angew. Chem. Int. Ed. 40, 3726–3748 (2001).
Cheong, P. H., Legault, C. Y., Um, J. M., Celebi-Olcum, N. & Houk, K. N. Quantum mechanical investigations of organocatalysis: mechanisms, reactivities, and selectivities. Chem. Rev. 111, 5042–5137 (2011).
Bertelsen, S. & Jorgensen, K. A. Organocatalysis–after the gold rush. Chem. Soc. Rev. 38, 2178–2189 (2009).
Wang, Z., Xu, X. & Kwon, O. Phosphine catalysis of allenes with electrophiles. Chem. Soc. Rev. 43, 2927–2940 (2014).
Cowen, B. J. & Miller, S. J. Enantioselective catalysis and complexity generation from allenoates. Chem. Soc. Rev. 38, 3102–3116 (2009).
Ye, L. W., Zhou, J. & Tang, Y. Phosphine-triggered synthesis of functionalized cyclic compounds. Chem. Soc. Rev. 37, 1140–1152 (2008).
Pham, T. Q., Pyne, S. G., Skelton, B. W. & White, A. H. Synthesis of carbocyclic hydantocidins via regioselective and diastereoselective phosphine-catalyzed [3 + 2]-cycloadditions to 5-methylenehydantoins. J. Org. Chem. 70, 6369–6377 (2005).
Wang, J. C. & Krische, M. J. Intramolecular organocatalytic [3 + 2] dipolar cycloaddition: stereospecific cycloaddition and the total synthesis of (+/−)-hirsutene. Angew. Chem. Int. Ed. 42, 5855–5857 (2003).
Du, Y. & Lu, X. A phosphine-catalyzed [3 + 2] cycloaddition strategy leading to the first total synthesis of (−)-hinesol. J. Org. Chem. 68, 6463–6465 (2003).
Yamataka, H. & Nagase, S. Theoretical Calculations on the Wittig Reaction Revisited. J. Am. Chem. Soc. 120, 7530–7536 (1998).
Wittig, G. & Schöllkopf, U. Über Triphenyl-phosphin-methylene als olefinbildende Reagenzien (I. Mitteil. Chem. Ber. 87, 1318–1330 (1954).
McDougal, N. T. & Schaus, S. E. Highly diastereoselective synthesis of bicyclo[3.2.1]octenones through phosphine-mediated condensations of 1,4-dien-3-ones. Angew. Chem. Int. Ed. 45, 3117–3119 (2006).
Wei, Y. & Shi, M. Recent advances in organocatalytic asymmetric Morita-Baylis-Hillman/aza-Morita-Baylis-Hillman reactions. Chem. Rev. 113, 6659–6690 (2013).
Sakakibara, S. & Hase, S. Synthesis of an Analogue of Desamino-lysine-vasopressin Containing No Disulfide Bond. Bull. Chem. Soc. Jpn. 41, 2816–2816 (1968).
Basavaiah, D., Rao, A. J. & Satyanarayana, T. Recent advances in the Baylis-Hillman reaction and applications. Chem. Rev. 103, 811–892 (2003).
Rauhut, M. M. & Currier, H. U.S. Patent, American Cyanamid Co., 3,074,999 (1963); Chem. Abstr. 58, 11224a (1963).
Aroyan, C. E., Dermenci, A. & Miller, S. J. The Rauhut–Currier reaction: a history and its synthetic application. Tetrahedron 65, 4069–4084 (2009).
Lu, X., Zhang, C. & Xu, Z. Reactions of Electron-Deficient Alkynes and Allenes under Phosphine Catalysis. Acc. Chem. Res. 34, 535–544 (2001).
Xu, Z. & Lu, X. A Novel [3 + 2] Cycloaddition Approach to Nitrogen Heterocycles via Phosphine-Catalyzed Reactions of 2,3-Butadienoates or 2-Butynoates and Dimethyl Acetylenedicarboxylate with Imines: A Convenient Synthesis of Pentabromopseudilin. J. Org. Chem. 63, 5031–5041 (1998).
Xu, Z. & Lu, X. Phosphine-catalyzed [3 + 2] cycloaddition reaction of methyl 2,3-butadienoate and N-tosylimines. A novel approach to nitrogen heterocycles. Tetrahedron Lett. 38, 3461–3464 (1997).
Zhang, C. & Lu, X. Phosphine-Catalyzed Cycloaddition of 2,3-Butadienoates or 2-Butynoates with Electron-Deficient Olefins. A Novel [3 + 2] Annulation Approach to Cyclopentenes. J. Org. Chem. 60, 2906–2908 (1995).
White, D. A. & Baizer, M. M. Catalysis of the Michael reaction by tertiary phosphines. Tetrahedron Lett. 14, 3597–3600 (1973).
Gómez-Bengoa, E., Cuerva, J. M., Mateo, C. & Echavarren, A. M. Michael Reaction of Stabilized Carbon Nucleophiles Catalyzed by [RuH2(PPh3)4]. J. Am. Chem. Soc. 118, 8553–8565 (1996).
Stewart, I. C., Bergman, R. G. & Toste, F. D. Phosphine-catalyzed hydration and hydroalkoxylation of activated olefins: use of a strong nucleophile to generate a strong base. J. Am. Chem. Soc. 125, 8696–8697 (2003).
Trost, B. M. & Li, C.-J. Novel "Umpolung" in C-C Bond Formation Catalyzed by Triphenylphosphine. J. Am. Chem. Soc. 116, 3167–3168 (1994).
Zhang, C. & Lu, X. Umpolung Addition Reaction of Nucleophiles to 2,3-Butadienoates Catalyzed by a Phosphine. Synlett 1995, 645–646 (1995).
Zhu, X. F., Lan, J. & Kwon, O. An expedient phosphine-catalyzed [4 + 2] annulation: synthesis of highly functionalized tetrahydropyridines. J. Am. Chem. Soc. 125, 4716–4717 (2003).
Soerensen, S., Hansen, R. S. & Jakobsen, H. J. Influence of lone-pair electrons on carbon-13-phosphorus-31 nuclear spin couplings in aromatic phosphines. J. Am. Chem. Soc. 94, 5900–5902 (1972).
Howard, S. T. & Platts, J. A. Relationship between Phosphine Proton Affinities and Lone Pair Density Properties. The Journal of Physical Chemistry 99, 9027–9033 (1995).
Dudding, T., Kwon, O. & Mercier, E. Theoretical rationale for regioselection in phosphine-catalyzed allenoate additions to acrylates, imines, and aldehydes. Org. Lett. 8, 3643–3646 (2006).
Lee, R. et al. The origin of enantioselectivity in the L-threonine-derived phosphine-sulfonamide catalyzed aza-Morita-Baylis-Hillman reaction: effects of the intramolecular hydrogen bonding. Org. Biomol. Chem. 11, 4818–4824 (2013).
Cho, C. W., Kong, J. R. & Krische, M. J. Phosphine-catalyzed regiospecific allylic amination and dynamic kinetic resolution of Morita-Baylis-Hillman acetates. Org. Lett. 6, 1337–1339 (2004).
Aggarwal, V. K., Harvey, J. N. & Robiette, R. On the importance of leaving group ability in reactions of ammonium, oxonium, phosphonium, and sulfonium ylides. Angew. Chem. Int. Ed. 44, 5468–5471 (2005).
Pham, T. Q., Pyne, S. G., Skelton, B. W. & White, A. H. Regioselective and diastereoselective phosphine-catalysed [3 + 2] cycloadditions to 5-methylenehydantoins: reversal of regioselectivity using chiral N-2-butynoyl-(4S)-benzyloxazolidinone. Tetrahedron Lett. 43, 5953–5956 (2002).
Wang, J. C., Ng, S. S. & Krische, M. J. Catalytic diastereoselective synthesis of diquinanes from acyclic precursors. J. Am. Chem. Soc. 125, 3682–3683 (2003).
Na, R. et al. Phosphine-catalyzed annulations of azomethine imines: allene-dependent [3 + 2], [3 + 3], [4 + 3], and [3 + 2 + 3] pathways. J. Am. Chem. Soc. 133, 13337–13348 (2011).
Tan, B., Candeias, N. R. & Barbas, C. F. 3rd Core-structure-motivated design of a phosphine-catalyzed [3 + 2] cycloaddition reaction: enantioselective syntheses of spirocyclopenteneoxindoles. J. Am. Chem. Soc. 133, 4672–4675 (2011).
Rychnovsky, S. D. & Kim, J. Triphenylphosphine-Catalyzed Isomerizations of Enynes to (E,E,E)-Trienes: Phenol as a Cocatalyst. J. Org. Chem. 59, 2659–2660 (1994).
Ye, L. W., Sun, X. L., Wang, Q. G. & Tang, Y. Phosphine-catalyzed intramolecular formal [3 + 2] cycloaddition for highly diastereoselective synthesis of bicyclo[n.3.0] compounds. Angew. Chem. Int. Ed. 46, 5951–5954 (2007).
Nicolas, L. et al. Triphenylphosphine: a catalyst for the synthesis of C-aryl furanosides from furanosyl halides. Tetrahedron Lett. 55, 849–852 (2014).
Zhang, K., Cai, L., Jiang, X., Garcia-Garibay, M. A. & Kwon, O. Phosphine-Mediated Iterative Arene Homologation Using Allenes. J. Am. Chem. Soc. 137, 11258–11261 (2015).
Sadow, A. D. & Togni, A. Enantioselective addition of secondary phosphines to methacrylonitrile: catalysis and mechanism. J. Am. Chem. Soc. 127, 17012–17024 (2005).
Cowen, B. J. & Miller, S. J. Enantioselective [3 + 2]-cycloadditions catalyzed by a protected, multifunctional phosphine-containing alpha-amino acid. J. Am. Chem. Soc. 129, 10988–10989 (2007).
Jiang, Y. Q., Shi, Y. L. & Shi, M. Chiral phosphine-catalyzed enantioselective construction of gamma-butenolides through substitution of Morita-Baylis-Hillman acetates with 2-trimethylsilyloxy furan. J. Am. Chem. Soc. 130, 7202–7203 (2008).
Han, X., Zhong, F., Wang, Y. & Lu, Y. Versatile enantioselective [3 + 2] cyclization between imines and allenoates catalyzed by dipeptide-based phosphines. Angew. Chem. Int. Ed. 51, 767–770 (2012).
Wang, T. et al. Regiodivergent Enantioselective gamma-Additions of Oxazolones to 2,3-Butadienoates Catalyzed by Phosphines: Synthesis of alpha,alpha-Disubstituted alpha-Amino Acids and N,O-Acetal Derivatives. J. Am. Chem. Soc. 138, 265–271 (2016).
Xia, Y. et al. An unexpected role of a trace amount of water in catalyzing proton transfer in phosphine-catalyzed (3 + 2) cycloaddition of allenoates and alkenes. J. Am. Chem. Soc. 129, 3470–3471 (2007).
Fang, Y. Q. & Jacobsen, E. N. Cooperative, highly enantioselective phosphinothiourea catalysis of imine-allene [3 + 2] cycloadditions. J. Am. Chem. Soc. 130, 5660–5661 (2008).
Liang, Y., Liu, S., Xia, Y., Li, Y. & Yu, Z. X. Mechanism, regioselectivity, and the kinetics of phosphine-catalyzed [3 + 2] cycloaddition reactions of allenoates and electron-deficient alkenes. Chem.-Eur. J. 14, 4361–4373 (2008).
Lam, Y. H., Grayson, M. N., Holland, M. C., Simon, A. & Houk, K. N. Theory and Modeling of Asymmetric Catalytic Reactions. Acc. Chem. Res. 49, 750–762 (2016).
Huisgen, R. 1,3-Dipolar Cycloadditions. Past and Future. Angew. Chem. Int. Ed. 2, 565–598 (1963).
Coldham, I. & Hufton, R. Intramolecular dipolar cycloaddition reactions of azomethine ylides. Chem. Rev. 105, 2765–2810 (2005).
Ess, D. H., Jones, G. O. & Houk, K. N. Conceptual, Qualitative, and Quantitative Theories of 1,3-Dipolar and Diels–Alder Cycloadditions Used in Synthesis. Adv. Synth. Catal. 348, 2337–2361 (2006).
Pandey, G., Banerjee, P. & Gadre, S. R. Construction of enantiopure pyrrolidine ring system via asymmetric [3 + 2]-cycloaddition of azomethine ylides. Chem. Rev. 106, 4484–4517 (2006).
Lan, Y., Wheeler, S. E. & Houk, K. N. Extraordinary Difference in Reactivity of Ozone (OOO) and Sulfur Dioxide (OSO): A Theoretical Study. J Chem Theory Comput 7, 2104–2111 (2011).
Wilson, J. E. & Fu, G. C. Synthesis of functionalized cyclopentenes through catalytic asymmetric [3 + 2] cycloadditions of allenes with enones. Angew. Chem. Int. Ed. 45, 1426–1429 (2006).
Fujiwara, Y. & Fu, G. C. Application of a new chiral phosphepine to the catalytic asymmetric synthesis of highly functionalized cyclopentenes that bear an array of heteroatom-substituted quaternary stereocenters. J. Am. Chem. Soc. 133, 12293–12297 (2011).
Zhu, G. et al. Asymmetric [3 + 2] Cycloaddition of 2,3-Butadienoates with Electron-Deficient Olefins Catalyzed by Novel Chiral 2,5-Dialkyl-7-phenyl-7- phosphabicyclo[2.2.1]heptanes. J. Am. Chem. Soc. 119, 3836–3837 (1997).
Wallace, D. J., Sidda, R. L. & Reamer, R. A. Phosphine-catalyzed cycloadditions of allenic ketones: new substrates for nucleophilic catalysis. J. Org. Chem. 72, 1051–1054 (2007).
Voituriez, A., Panossian, A., Fleury-Bregeot, N., Retailleau, P. & Marinetti, A. 2-Phospha[3]ferrocenophanes with planar chirality: synthesis and use in enantioselective organocatalytic [3 + 2] cyclizations. J. Am. Chem. Soc. 130, 14030–14031 (2008).
Sampath, M. & Loh, T. P. Silicon as a directing group in the phosphine-catalyzed [2+3]-cycloaddition of aryl allenones with electron-deficient olefins. Chem. Commun. 1568–1570 (2009).
Zhang, X. C., Cao, S. H., Wei, Y. & Shi, M. Phosphine-catalyzed highly diastereoselective [3 + 2] cyclization of isatin derived electron-deficient alkenes with alpha-allenic esters. Chem. Commun. 47, 1548–1550 (2011).
Jean, L. & Marinetti, A. Phosphine-catalyzed enantioselective [3 + 2] annulations of 2,3-butadienoates with imines. Tetrahedron Lett. 47, 2141–2145 (2006).
Xiao, H. et al. Asymmetric [3 + 2] cycloadditions of allenoates and dual activated olefins catalyzed by simple bifunctional N-acyl aminophosphines. Angew. Chem. Int. Ed. 49, 4467–4470 (2010).
Han, X., Wang, Y., Zhong, F. & Lu, Y. Enantioselective [3 + 2] cycloaddition of allenes to acrylates catalyzed by dipeptide-derived phosphines: facile creation of functionalized cyclopentenes containing quaternary stereogenic centers. J. Am. Chem. Soc. 133, 1726–1729 (2011).
Gladiali, S., Dore, A., Fabbri, D., De Lucchi, O. & Manassero, M. Novel atropisomeric phosphorus ligands: 4,5-dihydro-3H-dinaphtho[2,1-c;1′,2′-e]phosphepine derivatives. Tetrahedron: Asymmetry 5, 511–514 (1994).
Tang, W. & Zhang, X. New chiral phosphorus ligands for enantioselective hydrogenation. Chem. Rev. 103, 3029–3070 (2003).
Junge, K. et al. Synthesis of chiral monodentate binaphthophosphepine ligands and their application in asymmetric hydrogenations. Tetrahedron: Asymmetry 15, 2621–2631 (2004).
Wurz, R. P. & Fu, G. C. Catalytic asymmetric synthesis of piperidine derivatives through the [4 + 2] annulation of imines with allenes. J. Am. Chem. Soc. 127, 12234–12235 (2005).
Hou, G., Li, W., Ma, M., Zhang, X. & Zhang, X. Highly efficient iridium-catalyzed asymmetric hydrogenation of unprotected beta-enamine esters. J. Am. Chem. Soc. 132, 12844–12846 (2010).
Gladiali, S., Alberico, E., Junge, K. & Beller, M. BINEPINES: chiral binaphthalene-core monophosphepine ligands for multipurpose asymmetric catalysis. Chem. Soc. Rev. 40, 3744–3763 (2011).
Lee, S. Y., Fujiwara, Y., Nishiguchi, A., Kalek, M. & Fu, G. C. Phosphine-catalyzed enantioselective intramolecular [3 + 2] annulations to generate fused ring systems. J. Am. Chem. Soc. 137, 4587–4591 (2015).
Frisch, M. J. et al. Gaussian 09, Revision D.01, Gaussian, Inc., Wallingford, CT (2013).
Lee, C., Yang, W. & Parr, R. G. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density. Phys. Rev. B 37, 785 (1988).
Becke, A. D. Density-functional thermochemistry. III. The role of exact exchange. J. Chem. Phys. 98, 5648–5652 (1993).
Marenich, A. V., Cramer, C. J. & Truhlar, D. G. Universal solvation model based on solute electron density and on a continuum model of the solvent defined by the bulk dielectric constant and atomic surface tensions. J. Phys. Chem. B 113, 6378–6396 (2009).
Peverati, R. & Truhlar, D. G. Screened-exchange density functionals with broad accuracy for chemistry and solid-state physics. Phys. Chem. Chem. Phys. 14, 16187–16191 (2012).
Zhao, Y., Ng, H. T., Peverati, R. & Truhlar, D. G. Benchmark Database for Ylidic Bond Dissociation Energies and Its Use for Assessments of Electronic Structure Methods. J Chem Theory Comput 8, 2824–2834 (2012).
Yu, Z. & Lan, Y. Mechanism of rhodium-catalyzed carbon-silicon bond cleavage for the synthesis of benzosilole derivatives: a computational study. J. Org. Chem. 78, 11501–11507 (2013).
Shan, C. et al. Mechanism of Ruthenium-Catalyzed Direct Arylation of C–H Bonds in Aromatic Amides: A Computational Study. Organometallics 35, 1440–1445 (2016).
Zhu, L., Qi, X. & Lan, Y. Rhodium-Catalyzed Hetero-(5 + 2) Cycloaddition of Vinylaziridines and Alkynes: A Theoretical View of the Mechanism and Chirality Transfer. Organometallics 35, 771–777 (2016).
Wiberg, K. B. Application of the pople-santry-segal CNDO method to the cyclopropylcarbinyl and cyclobutyl cation and to bicyclobutane. Tetrahedron 24, 1083–1096 (1968).
Woutersen, S. & Hamm, P. Structure Determination of Trialanine in Water Using Polarization Sensitive Two-Dimensional Vibrational Spectroscopy. J. Phys. Chem. B 104, 11316–11320 (2000).
Penev, E., Kratzer, P. & Scheffler, M. Effect of strain on surface diffusion in semiconductor heteroepitaxy. Physical Review B 64 (2001).
Improta, R. & Santoro, F. Excited-state behavior of trans and cis isomers of stilbene and stiff stilbene: a TD-DFT study. J. Phys. Chem. A 109, 10058–10067 (2005).
Lin, Z. Interplay between theory and experiment: computational organometallic and transition metal chemistry. Acc. Chem. Res. 43, 602–611 (2010).
Sperger, T., Sanhueza, I. A., Kalvet, I. & Schoenebeck, F. Computational Studies of Synthetically Relevant Homogeneous Organometallic Catalysis Involving Ni, Pd, Ir, and Rh: An Overview of Commonly Employed DFT Methods and Mechanistic Insights. Chem. Rev. 115, 9532–9586 (2015).
Wu, W. et al. Iridium Catalysts with f-Amphox Ligands: Asymmetric Hydrogenation of Simple Ketones. Org. Lett. 18, 2938–2941 (2016).
Liu, P., Montgomery, J. & Houk, K. N. Ligand steric contours to understand the effects of N-heterocyclic carbene ligands on the reversal of regioselectivity in Ni-catalyzed reductive couplings of alkynes and aldehydes. J. Am. Chem. Soc. 133, 6956–6959 (2011).
Hong, X., Liu, P. & Houk, K. N. Mechanism and origins of ligand-controlled selectivities in [Ni(NHC)]-catalyzed intramolecular (5 + 2) cycloadditions and homo-ene reactions: a theoretical study. J. Am. Chem. Soc. 135, 1456–1462 (2013).
Yu, Z., Qi, X., Li, Y., Liu, S. & Lan, Y. Mechanism, chemoselectivity and enantioselectivity for the rhodium-catalyzed desymmetric synthesis of hydrobenzofurans: a theoretical study. Org. Chem. Front. 3, 209–216 (2016).
Acknowledgements
This work was supported by the National Natural Science Foundation of China (Grants 21372266). We are also grateful to the Fundamental Research Funds for the Central Universities (Chongqing University) (no. 106112017CDJXY220007) and the Graduate Scientific Research and Innovation Foundation of Chongqing, China (no. CYB16034).
Author information
Authors and Affiliations
Contributions
Y.L., M.D., R.B., and L.Z. conceived this project and co-wrote the manuscript. M.D. and L.Z. performed the theoretical calculations. X.Q., Z.Y., Y.L., and R.B. helped improve the manuscript. All authors discussed the results and commented on the manuscript.
Corresponding authors
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Duan, M., Zhu, L., Qi, X. et al. From Mechanistic Study to Chiral Catalyst Optimization: Theoretical Insight into Binaphthophosphepine-catalyzed Asymmetric Intramolecular [3 + 2] Cycloaddition. Sci Rep 7, 7619 (2017). https://doi.org/10.1038/s41598-017-07863-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-017-07863-9
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
