Abstract
The use of oxide fuel cells and other solid-state ionic devices in energy applications is limited by their requirement for elevated operating temperatures, typically above 800 °C (ref. 1). Thin-film membranes allow low-temperature operation by reducing the ohmic resistance of the electrolytes2. However, although proof-of-concept thin-film devices have been demonstrated3, scaling up remains a significant challenge because large-area membranes less than ∼100 nm thick are susceptible to mechanical failure. Here, we report that nanoscale yttria-stabilized zirconia membranes with lateral dimensions on the scale of millimetres or centimetres can be made thermomechanically stable by depositing metallic grids on them to function as mechanical supports. We combine such a membrane with a nanostructured dense oxide cathode to make a thin-film solid-oxide fuel cell that can achieve a power density of 155 mW cm–2 at 510 °C. We also report a total power output of more than 20 mW from a single fuel-cell chip. Our large-area membranes could also be relevant to electrochemical energy applications such as gas separation, hydrogen production and permeation membranes.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Singhal, S. C. Advances in solid oxide fuel cell technology. Solid State Ionics 135, 305–313 (2000).
Steele, B. C. H. & Heinzel, A. Materials for fuel-cell technologies. Nature 414, 345–352 (2001).
Evans, A., Bieberle-Hütter, A., Rupp, J. L. M. & Gauckler, L. J. Review on microfabricated micro-solid oxide fuel cell membranes. J. Power Sources 194, 119–129 (2009).
Wachsman, E. D., Jayaweera, P., Krishnan, G. & Sanjurjo, A. Electrocatalytic reduction of NOx on La1–xAxB1–yB′yO3–δ: evidence of electrically enhanced activity. Solid State Ionics 136–137, 775–782 (2000).
Clark, D. J., Losey, R. W. & Suitor, J. W. Separation of oxygen by using zirconia solid electrolyte membranes. Gas Separ. Purif. 6, 201–205 (1992).
Riegel, J., Neumann, H. & Wiedenmann, H. M. Exhaust gas sensors for automotive emission control. Solid State Ionics 152–153, 783–800 (2002).
Beckel, D. et al. Thin films for micro solid oxide fuel cells. J. Power Sources 173, 325–345 (2007).
deSouza, S., Visco, S. J. & DeJonghe, L. C. Thin-film solid oxide fuel cell with high performance at low temperature. Solid State Ionics 98, 57–61 (1997).
Chen, X., Wu, N. J., Smith, L. & Ignatiev, A. Thin-film heterostructure solid oxide fuel cells. Appl. Phys. Lett. 84, 2700–2702 (2004).
Ignatiev, A., Chen, X., Wu, N. J., Lu, Z. G. & Smith, L. Nanostructured thin solid oxide fuel cells with high power density. Dalton Trans. 5501–5506 (2008).
Jankowski, A. F., Hayes, J. P., Graff, R. T. & Morse, J. D. Micro-fabricated thin-film fuel cells for portable power requirements. Mater. Res. Soc. Symp. Proc. 730, V4.2 (2002).
Johnson, A. C., Lai, B. K., Xiong, H. & Ramanathan, S. An experimental investigation into micro-fabricated solid oxide fuel cells with ultra-thin La0.6Sr0.4Co0.8Fe0.2O3 cathodes and yttria-doped zirconia electrolyte films. J. Power Sources 186, 252–260 (2009).
Johnson, A. C., Baclig, A., Harburg, D. V., Lai, B. K. & Ramanathan, S. Fabrication and electrochemical performance of thin-film solid oxide fuel cells with large area nanostructured membranes. J. Power Sources 195, 1149–1155 (2010).
Lai, B. K., Xiong, H., Tsuchiya, M., Johnson, A. C. & Ramanathan, S. Microstructure and microfabrication considerations for self-supported on-chip ultra-thin micro-solid oxide fuel cell membranes. Fuel Cells 9, 699–710 (2009).
Lai, B. K., Kerman, K. & Ramanathan, S. On the role of ultra-thin oxide cathode synthesis on the functionality of micro-solid oxide fuel cells: structure, stress engineering and in situ observation of fuel cell membranes during operation. J. Power Sources 195, 5185–5196 (2010).
Tsuchiya, M., Lai, B. K., Johnson, A. C. & Ramanathan, S. Photon-assisted synthesis of ultra-thin yttria-doped zirconia membranes: structure, variable temperature conductivity and micro-fuel cell devices. J. Power Sources 195, 994–1000 (2010).
Baertsch, C. D. et al. Fabrication and structural characterization of self-supporting electrolyte membranes for a micro solid-oxide fuel cell. J. Mater. Res. 19, 2604–2615 (2004).
Yamamoto, N. et al. Nonlinear thermomechanical design of microfabricated thin plate devices in the post-buckling regime. J. Micromech. Microeng. 20, 035027 (2010).
Muecke, U. P. et al. Micro solid oxide fuel cells on glass ceramic substrates. Adv. Funct. Mater. 18, 3158–3168 (2008).
Bieberle-Hütter, A. et al. A micro-solid oxide fuel cell system as battery replacement. J. Power Sources 177, 123–130 (2008).
Huang, H. et al. High-performance ultrathin solid oxide fuel cells for low-temperature operation. J. Electrochem. Soc. 154, B20–B24 (2007).
Su, P. C., Chao, C. C., Shim, J. H., Fasching, R. & Prinz, F. B. Solid oxide fuel cell with corrugated thin film electrolyte. Nano Lett. 8, 2289–2292 (2008).
Shim, J. H., Chao, C. C., Huang, H. & Prinz, F. B. Atomic layer deposition of yttria-stabilized zirconia for solid oxide fuel cells. Chem. Mater. 19, 3850–3854 (2007).
Quinn, D. J., Wardle, B. & Spearing, S. M. Residual stress and microstructure of as-deposited and annealed, sputtered yttria-stabilized zirconia thin films. J. Mater. Res. 23, 609–618 (2008).
Garbayo, I. et al. Electrical characterization of thermomechanically stable YSZ membranes for micro solid oxide fuel cells applications. Solid State Ionics 181, 322–331 (2010).
Freund, L. B. & Suresh, S. Thin Film Materials (Cambridge Univ. Press, 2003).
Tang, Y., Stanley, K., Wu, J., Ghosh, D. & Zhang, J. Design consideration of micro thin film solid-oxide fuel cells. J. Micromech. Microeng. 15, S185–S192 (2005).
Srikar, V. T., Turner, K. T., Ie, T. Y. A. & Spearing, S. M. Structural design considerations for micromachined solid-oxide fuel cells. J. Power Sources 125, 62–69 (2004).
Hsieh, H. T., Chiu, C. W., Tsao, T., Jiang, F. K. & Su, G. D. J. Low-actuation-voltage MEMS for 2-D optical switches. J. Lightwave Technol. 24, 4372–4379 (2006).
Gibson, L. J. & Ashby, M. F. Cellular Solids: Structure and Properties 2nd edn (Cambridge Univ. Press, 1997).
Ziebart, V., Paul, O. & Baltes, H. Strongly buckled square micromachined membranes. J. Microelectromech. S 8, 423–432 (1999).
Rey-Mermet, S. & Muralt, P. Solid oxide fuel cell membranes supported by nickel grid anode. Solid State Ionics 179, 1497–1500 (2008).
Acknowledgements
The authors thank V. Chun, A. Johnson and K. Kerman for stimulating discussions. The work was supported in part by the National Science Foundation (NSF; grant no. CCF-0926148). This work was performed in part at the Center for Nanoscale Systems (CNS), a member of the National Nanotechnology Infrastructure Network (NNIN), which is supported by NSF award no. ECS-0335765.
Author information
Authors and Affiliations
Contributions
M.T. planned, designed and conducted the experiments and data analysis, in collaboration with B.K.L. and S.R. M.T. and S.R. wrote the manuscript. All authors discussed the results and their interpretation.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary information
Supplementary information (PDF 1382 kb)
Rights and permissions
About this article
Cite this article
Tsuchiya, M., Lai, BK. & Ramanathan, S. Scalable nanostructured membranes for solid-oxide fuel cells. Nature Nanotech 6, 282–286 (2011). https://doi.org/10.1038/nnano.2011.43
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nnano.2011.43
This article is cited by
-
Recent progress in the structure optimization and development of proton-conducting electrolyte materials for low-temperature solid oxide cells
International Journal of Minerals, Metallurgy and Materials (2022)
-
Achievements and trends of solid oxide fuel cells in clean energy field: a perspective review
Frontiers in Energy (2020)
-
Structure and electrochemical properties of titanate perovskite with in situ exsolution as a ceramic electrode material
Journal of Electroceramics (2020)
-
Shaping triple-conducting semiconductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ into an electrolyte for low-temperature solid oxide fuel cells
Nature Communications (2019)
-
Nanoscale Surface and Interface Engineering of Solid Oxide Fuel Cells by Atomic Layer Deposition
International Journal of Precision Engineering and Manufacturing-Green Technology (2019)