Small-scale and distortion-free measurement of electric fields is crucial for applications such as surveying atmospheric electrostatic fields, lightning research and safeguarding areas close to high-voltage power lines. A variety of measurement systems exist, the most common of which are field mills, which work by picking up the differential voltage of the measurement electrodes while periodically shielding them with a grounded electrode. However, all current approaches are bulky, suffer from a strong temperature dependency or severely distort the electric field, and thus require a well-defined surrounding and complex calibration procedures. Here we show that microelectromechanical system (MEMS) devices can be used to measure electric field strength without significant field distortion. The purely passive MEMS devices exploit the effect of electrostatic induction, which is used to generate internal forces that are converted into an optically tracked mechanical displacement of a spring-suspended seismic mass. The devices exhibit resolutions on the order of 100 V m−1 Hz−1/2 with a measurement range of up to tens of kilovolts per metre in the quasi-static regime ≲300 Hz). We also show that it should be possible to achieve resolutions of around 1 V m−1 Hz−1/2 by fine-tuning the sensor embodiment. These MEMS devices are compact and could be mass produced easily for wide application.
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Rent or Buy article
Get time limited or full article access on ReadCube.
All prices are NET prices.
Hill, D. A. & Kanda, M. The Measurement, Instrumentation, and Sensors Handbook XXV, Section 47, Electric Field Strength (ed. Webster, J. G.) (CRC Press, Boca Raton, FL, 1999).
Kirkham, H. On the measurement of stationary electric fields in air. Conf. Precision Electromagnetic Measurements (2002); https://trs-new.jpl.nasa.gov/handle/2014/11802
Vasa, N., Kawata, Y., Tanaka, R. & Yokoyama, S. Development of an electric field sensor based on second harmonic generation with electro-optic materials. J. Mater. Process. Technol. 185, 173–177 (2007).
Meier, T., Kostrzewa, C., Petermann, K. & Schuppert, B. Integrated optical E-field probes with segmented modulator electrodes. J. Lightwave Technol. 12, 1497–1503 (1994).
Williams, K., De Bruyker, D., Limb, S., Amendt, E. & Overland, D. Vacuum steered-electron electric-field sensor. J. Microelectromech. Syst. 23, 157–167 (2014).
Ando, B., Baglio, S., Marletta, V. & Bulsara, A. R. A nonlinear electric field sensor that exploits coupled oscillator dynamics: the charge collection mechanism. IEEE Trans. Instrum. Meas. 62, 1326–1333 (2013).
Berthelier, J. J. et al. ICE, the electric field experiment on DEMETER. Planet. Space Sci. 54, 456–471 (2006).
Peng, C., Yang, P., Zhang, H., Guo, X. & Xia, S. Design of a novel closed-loop SOI MEMS resonant electrostatic field sensor. Proc. Eng. 5, 1482–1485 (2010).
Pierce, E. T. Atmospheric electricity—some themes. Bull. Am. Meteorol. Soc. 55, 1186–1194 (1974).
Williams, E. & Mareev, E. Recent progress on the global electrical circuit. Atmos. Res. 135–136, 208–227 (2014).
Zhang, B., Wang, W. & He, J. Impact factors in calibration and application of field mill for measurement of DC electric field with space charges. CSEE J. Power Energy Syst. 1, 31–36 (2015).
Horenstein, M. N. & Stone, P. R. A micro-aperture electrostatic field mill based on MEMS technology. J. Electrostat. 51–52, 515–521 (2001).
Peng, C., Chen, X., Bai, Q., Luo, L. & Xia, S. A novel high performance micromechanical resonant electrostatic field sensor used in atmospheric electric field detection. 19th IEEE Int. Conf. Micro Electro Mechanical Systems 2006, 698–701 (IEEE, 2006).
Kalinowski, D., Redlich, S. & Jager, D. Novel micromachined fiber-optic E-field sensor. IEEE Lasers and Electro-Optics Society 1999 12th Annual Meeting Vol. 1, 385–386 (IEEE, 1999).
Rogers, A. J. Optical measurement of current and voltage on power systems. IEE J. Electric Power Appl. 2, 120–124 (1979).
Soref, R. A. & Bennett, B. Electrooptical effects in silicon. IEEE J. Quantum Electron. 23, 123–129 (1987).
Toney, J. E. et al. in Proc. SPIE 8519, Nanophotonics and Macrophotonics for Space Environments VI (eds Taylor, E. W. et al.) 851904 (SPIE, Bellingham, Washington, 2012).
Berger, J., Petermann, K., Fähling, H. & Wust, P. Calibrated electro-optic E-field sensors for hyperthermia applications. Phys. Med. Biol. 46, 399 (2001).
Barthod, C., Passard, M., Fortin, M., Galez, C. & Bouillot, J. Design and optimization of an optical high electric field sensor. 2000 Conf. Precision Electromagnetic Measurements Digest 423–424 (2000).
Chmielak, B. et al. Pockels effect based fully integrated, strained silicon electro-optic modulator. Opt. Express 19, 17212–17219 (2011).
Zeng, R., Wang, B., Niu, B. & Yu, Z. Development and application of integrated optical sensors for intense E-field measurement. Sensors 12, 11406–11434 (2012).
Bohnert, K., Gabus, P., Brändle, H. & Khan, A. Fiber-optic current and voltage sensors for high-voltage substations. Proc. 16th Int. Conf. Optical FiberSensors 13–17 (Nara, Japan, 2003).
Landau, L., Lifshitz, E. & Piaevski, L. Electrodynamics of Continuous Media (Butterworth-Heinemann, Oxford, UK, 1984).
Hortschitz, W. et al. An optical in-plane MEMS vibration sensor. IEEE Sens. J. 11, 2805–2812 (2011).
Hortschitz, W. et al. MOEMS vibration sensor for advanced low-frequency applications with pm resolution. Proc. Eng. 87, 835–838 (2014).
Middlemiss, R. et al. Measurement of the Earth tides with a MEMS gravimeter. Nature 531, 614–617 (2016).
Zhang, W.-M., Yan, H., Peng, Z.-K. & Meng, G. Electrostatic pull-in instability in MEMS/NEMS: a review. Sens. Actuat. A 214, 187–218 (2014).
Boyd, E. J., Li, L., Blue, R. & Uttamchandani, D. Measurement of the temperature coefficient of Young’s modulus of single crystal silicon and 3C silicon carbide below 273 K using micro-cantilevers. Sens. Actuat. A 198, 75–80 (2013).
Encke, J. et al. A miniaturized linear shaker system for MEMS sensor characterization. Proc. SPIE 8763, SmartSensors, Actuators, and MEMS VI 8763, 876315–876315 (2013); http://dx.doi.org/10.1117/12.2017405
Hortschitz, W. et al. Robust precision position detection with an optical MEMS hybrid device. IEEE Trans. Indust. Electron. 59, 4855–4862 (2012).
Hortschitz, W. et al. Optimized hybrid MOEMS sensors based on noise considerations. Proc. IEEE Sensors https://doi.org/10.1109/ICSENS.2012.6411322 (2012).
Hortschitz, W. et al. Receiver and amplifier optimization for hybrid MOEMS. Proc. IEEE Sensors https://doi.org/10.1109/ICSENS.2012.6411179 (2012).
Kainz, A. et al. Accurate analytical model for air damping in lateral MEMS/MOEMS oscillators. Sens. Actuat. A 255, 154–159 (2017).
This work was supported financially by the Austrian Science Fund (FWF, research grant P 28404-NBL), the European Regional Development Fund (ERDF) and the Province of Lower Austria. The authors thank G. Diendorfer for discussions and his support on acquiring the funding for this work.
The authors declare no competing financial interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Kainz, A., Steiner, H., Schalko, J. et al. Distortion-free measurement of electric field strength with a MEMS sensor. Nat Electron 1, 68–73 (2018). https://doi.org/10.1038/s41928-017-0009-5
Hyperfine Interactions (2019)
Nature Electronics (2018)