Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Tuning the photoexcitation response of cyanobacterial Photosystem I via reconstitution into Proteoliposomes


The role of natural thylakoid membrane housing of Photosystem I (PSI), the transmembrane photosynthetic protein, in its robust photoactivated charge separation with near unity quantum efficiency is not fundamentally understood. To this end, incorporation of suitable protein scaffolds for PSI incorporation is of great scientific and device manufacturing interest. Areas of interest include solid state bioelectronics, and photoelectrochemical devices that require bio-abio interfaces that do not compromise the photoactivity and photostability of PSI. Therefore, the surfactant-induced membrane solubilization of a negatively charged phospholipid (DPhPG) with the motivation of creating biomimetic reconstructs of PSI reconstitution in DPhPG liposomes is studied. Specifically, a simple yet elegant method for incorporation of PSI trimeric complexes into DPhPG bilayer membranes that mimic the natural thylakoid membrane housing of PSI is introduced. The efficacy of this method is demonstrated via absorption and fluorescence spectroscopy measurements as well as direct visualization using atomic force microscopy. This study provides direct evidence that PSI confinements in synthetic lipid scaffolds can be used for tuning the photoexcitation characteristics of PSI. Hence, it paves the way for development of fundamental understanding of microenvironment alterations on photochemical response of light activated membrane proteins.


The quest for green energy has sparked considerable interest in Photosystem I (PSI), the photosynthetic protein complex, that is akin to a nano-scale biological photodiode and enables light-activated charge separation (with nearly 100% quantum efficiency) to facilitate unidirectional electron flow1. The robust structural and photoactive electrochemical properties of PSI, a transmembrane protein, makes it an ideal candidate for incorporation into solid state bioelectronic or hybrid photovoltaic devices2. But the first step towards the successful fabrication of such bio-hybrid devices call for systematic assembly of oriented and functional PSI onto desired bio-abio interfaces via suitable protein scaffoldings. To this end, one must address the obvious question regarding the role of the natural thylakoid membrane housing of PSI trimeric complex in providing the required structural and functional scaffold to the protein. This had led to a growing interest in membrane reconstitution of PSI complexes to form stable proteoliposomes as the final product. Reconstituted proteoliposomes serve as experimental systems for the study of membrane enzymes3 and small helical membrane proteins, providing a sample environment that accurately mimics the native membrane environment and properties such as hydrophobic thickness, water concentration gradient and lipid order parameter gradient4, 5. Hence, our motivation for the present study stems from the desire to attain systematic incorporation of PSI complexes into synthetic membrane-bound structures that mimic the natural thylakoid membrane housing of PSI.

3D structures of several membrane proteins such as bacteriorhodopsin6, aquaporin7, EmrE8 have been determined using electron crystallography. However, both interactions within the protein as well as between the protein and its environment, influence the protein structure9. Thus, synthetic lipid bilayers have been employed as biomimetic environments to enable the structural characterizations of several membrane proteins such as, Gramicidin A10, M2 protein from the influenza A virus11, 12, trimeric structures from membrane-bound proteins involved with eicosanoid and glutathione metabolism13, 14, and the mercury transporter MerF15. Crystallographic studies of PSI at 2.5 A° resolution have identified four lipids consisting of three phosphatidylglycerol (PG) molecules and one monogalactosyldiacylglycerol (MGDG) molecule to be the integral cofactors of the transmembrane parts of PSI16. These lipids are considered to be largely responsible for the long-term stability and functionality of PSI17. In light of the large negatively charged PG content in PSI lipid structures, it becomes pertinent to design bio-mimetic membranes with high PG lipid contents that can be used for large membrane protein reconstitution.

In the past, our research group has performed successful photocurrent measurements on colloidal chemistry-driven and directed assembly of detergent-bound PSI monolayers on self-assembled monolayer (SAM) substrates2, 18,19,20. In spite of these efforts, the relatively low levels of photocurrent generation from these systems has increasingly drawn our attention towards the role of natural membrane scaffoldings in PSI trimeric complex in enhancing the efficiency, stability and lifetime of its photochemistry. Recently, Saboe et al. reconstituted 2D PSI crystals on a tethered bilayer lipid membrane support with intercalated conjugated oligoelectrolyte (COE) units21. In another work, Stieger et al. constructed 3D architectures consisting of the redox protein cytochrome c as a molecular scaffold for PSI as the photo-functional matrix element aided by DNA molecules as further building blocks22. Both of these studies show significant photocurrent enhancements due to the incorporation and possibly, the confinement of PSI in a biomimetic scaffold. These promising results shed light on the photocurrent enhancements arising from the high packing density and orientation of PSI in these complexly tailored biomimetic scaffolds. Yet, the exact role of the specific membrane scaffolds in driving the enhanced photoactive functionality and near unity quantum efficiency in PSI owing to the conformational changes in its native membrane bound form remains elusive.

Furthermore, a recent work on Photosystem II (PSII) integrated into electrodes, revealed that photosystems lacking the membrane environment undergo short circuiting electron transfer between electrode materials and the surface exposed chlorophylls23. This competing charge transfer pathway through the chlorophylls of the light-harvesting antenna results in underperformance of these integrated bio-photoelectrochemical systems24. It was additionally proposed that this short circuiting induces the generation of toxic free chlorophyll, and in turn the production of reactive oxygen species (ROS). ROS produced at the antenna chlorophylls might promote rapid deactivation of the photosynthetic proteins23. While very fast deactivation was shown for PSII when integrated in devices (half-life as low as 4 min when PSII is wired to electrodes via redox-active polymers)25 the same effect can be anticipated for PSI-based systems too. Indeed, half-life as low as 15 min was reported for the normally highly robust PSI protein upon integration in electron conducting matrices (redox hydrogel film) in absence of any lipid membrane26. Hence, one of the outlooks for the rational design of pigment–containing systems require strategies involving synthetic lipid membranes, as well-defined protein–pigment scaffolds, that can ensure insulation from unwanted charge transfer processes and control dissipation of excitation energy to minimize competing reactions with oxygen.

In our continual effort to investigate the optoelectronic behaviors of PSI confined under different bio-abio interfaces, this study presents a fast and elegant approach to achieve high density PSI encapsulation in synthetic lipid bilayer membranes to constitute PSI-proteoliposomes. To this end, we have recently investigated the phase transitions during detergent mediated solubilization of negatively charged 1,2-dipalmitoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (DPPG) liposomes, a member of the PG lipid family. The highly irregular structural arrangements that arises in this system at room temperature indicates its unsuitability for successful protein insertion. Furthermore, this study unveiled the possibility of 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) as a promising lipid candidate for protein insertions27. It should be noted that DPhPC is a branched phosphatidylcholine (PC) lipid with high thermal and structural stability28.

A significant amount of data has been amassed regarding the binary29, 30 and ternary lipid mixtures30, 31 including the miscibility phase diagrams for several of these systems. However, the majority of these studies have been performed for systems that contain only uncharged lipids. Miscibility studies on lipid mixtures containing charged lipids, in particular binary32, 33 and ternary mixtures of PC with PG34 have shown that membranes containing charged PG lipids indicate similar phase behavior as membranes containing only uncharged PC lipids. Considering the predominant presence of PG in the natural thylakoid membrane of PSI, we introduce a PG-based lipid as our choice for the study of reconstituted PSI proteins. To this end, in the present study we have chosen to work with DPhPG (1,2-diphytanoyl-sn-glycero-3-phospho-(1′-rac-glycerol)), a lipid with similar structure and thermotropic state that corresponds to the transition temperature of DPhPC. DPhPG is an anionic lipid with 16-carbon long hydrocarbon chains that are methyl-branched, stable and in fluid state over wide temperature ranges.

The current work involves the systematic protein incorporation into DPhPG liposomes. Four basic strategies can be used for the insertion of membrane proteins into liposomes. These include sonication, freeze-thawing, organic solvents, and detergents. The first three methods have significant limitations in efficient proteoliposome reconstitutions that include possible local probe heating during sonication that leads to degradation and denaturation of many membrane proteins. Similarly, organic solvents denature most amphiphilic membrane proteins even though reverse-phase evaporation and solvent injection using organic solvents enable efficient liposome preparations35, 36. However, since detergents are regularly employed during membrane protein purification processes; hence, detergent mediated solublization has become a preferred route for proteoliposome preparations37. To this end, fundamental understanding of the solution phase morphology of membranes during their interactions with detergent that determines the all-important membrane-detergent phase diagrams becomes critical for successful isolation, purification, reconstitution and crystallization of membrane proteins38,39,40. Thus, we first investigated the surfactant-induced membrane solubilization of DPhPG by a prototypical non-ionic detergent Triton X-100 (TX-100). Here, for ease of visualization and understanding, we have shown the structural details of both DPhPG and the detergent TX-100 in Fig. 1.

Figure 1

Molecular structure of lipid (DPhPG) and detergent (TX-100). DPhPG contains two hydrocarbon chains of 16 carbons with total lipid molecule length of ~2–3 nm. TX-100 molecule length is ~3.75–4.0 nm.

Isothermal titration calorimetry (ITC) has been classically used as a robust analytical technique for various application such as measuring binding affinities of ligands to membrane proteins41, optimizing inhibitor binding in drug discovery42, and accessing the partitioning of surfactants into electrically neutral lipid bilayer membranes43. In general, ITC is the preferred method for studying interactions between a bioactive molecule (surfactant/peptide/protein) and model lipid membranes44,45,46,47,48. In the present work, we have utilized ITC measurements for detecting composition-dependent transitions in lipid-detergent systems. Furthermore, dynamic light scattering (DLS) and cryo-transmission electron microscopy (cryo-TEM) imaging techniques are used to monitor the different stages of stepwise solubilization of liposomes with varying detergent concentrations. Specifically, the composition-dependent equilibrium transitions (phase diagram) of lipid/detergent mixtures is elucidated. Based on previous studies that indicate the occurrence of most successful protein incorporations during the second stage of detergent-mediated solubilization49,50,51,52, our prior studies set the backdrop for ideal detergent/lipid concentration ratios for successful protein insertions.

The latter part of our studies will utilize the aforementioned phase diagrams to achieve systematic incorporation of PSI into detergent-destabilized preformed-liposomes at the second stage of solubilization upon subsequent adsorption of detergents using polystyrene beads9, 30, 41. Size-exclusion chromatography (SEC) using high resolution fractionation based on size differences of various complexes has been employed to assure the partitioning of proteoliposomes from individual proteins and/or, excess detergents. Finally, we will confirm the PSI-proteoliposome formation via absorption and fluorescence spectroscopy measurements as well as high-resolution AFM imaging to directly visualize the proteoliposomes supported on gold substrates.


This section details our major results for the PSI-proteoliposome formation with the DPhPG/TX-100/PSI system, which can be briefly summarized as follows: (1) Phase diagrams of surfactant induced DPhPG solubilization; (2) Reconstitution of PSI trimers in DPhPG liposomes analyzed with the aid of absorption spectroscopy, fluorescence measurements and atomic force microscopy imaging.

Surfactant Induced DPhPG Solubilization

Membrane solubilization typically comprises a three-stage process represented by the structural transitions that occur as detergents interact with lipid membranes39, 53,54,55. As a function of increasing detergent concentrations, the aforementioned stages are: (I) the stage containing detergent monomers and vesicles wherein detergent monomers start getting incorporated into vesicles; (II) the stage where detergent monomers, mixed vesicles, and mixed micelles coexist (the saturated boundary indicated as Rsat in Fig. 2a); and (III) the final stage that constitutes pure micelles at varying detergent/lipid ratios and detergent monomers (the solubilization boundary indicate as Rsol in Fig. 2a). These three stages of detergent-liposome interactions are identified as a function of increasing detergent concentrations from ITC measurements and depicted in the phase diagrams in Fig. 2a and b.

Figure 2

Solubilization of preformed DPhPG liposomes induced by stepwise increase of TX-100 concentration. (a) phase diagram of DPhPG/TX-100 mixture in buffer; (b, left panel) solubilization titration of 1 mg ml−1 DPhPG liposomes with 77 mM TX-100, Compensation heat power, Δp, versus time, t, on top and heats of injection, Q, as a function of the total detergent concentration, CTrit, on bottom; (b, right panel) solubilization titration of 4 mg ml−1 DPhPG liposomes with 154 mM TX-100, Compensation heat power versus time on top and heats of injection as a function of the total detergent concentration on bottom.

Phase diagram of DPhPG/TX-100 mixture in 200 mM Na-Phosphate buffer is shown in Fig. 2a. Data are collected from two series of ITC solubilization experiments starting with two different lipid concentrations (~1 mg ml−1 and 4 mg ml−1) wherein the Rsat and Rsol boundaries are as indicated. (Refer to Supplementary Material for complete phase diagram analysis). Figure 2b (top left panel) represents the raw data from the titration of 1 mg ml−1 DPhPG vesicles with 77 mM of TX-100 in buffer at room temperature. The three stages of detergent-liposome interactions are identified as vesicles (I), coexistence (II) and micelles (III) in the curve of compensation heat power, Δp (μcal/sec) versus time, t. Figure 2b (bottom left panel) represents the heats of injection, Q (kcal/mol) as a function of increasing TX-100 concentrations, CTrit (mM). Figure 2b (top and bottom right panel) represent Δp versus time t, and Q as a function of increasing CTrit resulting from the integration of the power peaks obtained from the titrations of 4 mg ml−1 DPhPG vesicles with 154 mM TX-100, respectively. The onset of solubilization (R sat) is represented by the drop in Q (exothermic reaction at stage I – II transition), followed by a region of virtually constant Q (stage II). Beyond this region, an increase in Q (stage II-III transition) marks the completion of solubilization (R sol). The R sat and R sol breakpoints read from these curves are included in Fig. 2a. The significant findings from our solubilization studies of DPhPG with TX-100, namely, the saturation (Rsat) and solubilization (Rsol) concentrations of TX-100 are summarized in Table 1.

Table 1 Highlights of lipid/detergent concentrations, saturation (Rsat) and solubilization (Rsol) concentrations from TX-100 induced DPhPG solubilization.

Size and morphological variations during the stage II of solubilization are elucidated with cryo-TEM images of liposome structures in their vitrified states (Fig. 3b and d) as well as DLS measurements (Fig. 3a and c). Cryo-TEM images for 4 mg mL−1 DPhPG liposome solubilization with detergent concentrations ranging between R sat < CTrit < R sol indicate the enlargement in the liposome diameter due to detergent incorporation within the membrane bilayers. Particle size distributions (PSD in terms of number distribution, %) corresponding to solubilization with CTrit = 5 mM indicate two peaks at ~150 and 320 nm as compared to the peak size ~100 nm for liposomes without any TX-100 (Fig. 3a). We also observe that these enlarged liposomes coexist with stable open vesicular structures at CTrit ~ 5.0 mM (see Fig. 3b). This bilayer opening is associated with the rapid solubilization of bilayers by detergents with relatively small polar moiety as in the case of TX-100. Such rapid solubilization is achieved due to detergent molecules interacting from both sides of the phospholipid bilayer (transbilayer solubilization) that ultimately makes it permeable and in turn disintegrates into mixed micelles56,57,58,59. Upon further increase of detergent concentrations (CTrit ~ 8.0 mM), enlarged vesicles continue to disintegrate into mixed micelles and open vesicular structures with smaller size (~30–90 nm) as observed from both DLS measurements (Fig. 3c) and cryo-TEM micrographs (Fig. 3d). Based on these data, CTrit concentrations were chosen from points within the coexistence region (stage II) of the solubilization phase diagrams in Fig. 2a to execute our PSI reconstitutions in the liposomes.

Figure 3

Number distribution (%) from DLS measurements (a,c) and corresponding cryo-TEM micrographs (b,d) of preformed DPhPG liposomes during the second stage (stage II) of solubilization with TX-100. Liposomes were treated with different TX-100 concentrations of (a,b) CTrit = 5.0 mM, and (c,d) CTrit = 8.0 mM.

Liposome-Based Reconstitution of Trimeric PSI

PSI-proteoliposme reconstitutions were carried out by incorporating TX-100 solubilized PSIs into TX-100 destabilized liposomes at multiple points chosen from within the stage II of solubilization. Following the PSI insertion, the excess detergents were adsorbed by using polystyrene beads. Two points within the stage II of solubilization were chosen: CTrit = 8.0 mM (intermediate part of stage II), and CTrit = 12.0 mM (end of stage II). Protein reconstitution was performed at three weight protein-to-lipid ratios (wPLR) of 0.26, 0.53 and 1.2. Subsequently, size-exclusion chromatography (SEC) fractions were collected prior to any PSI-proteoliposome analysis whereby PSI-proteoliposmes were separated from individual PSIs, small aggregates or excess detergent based on their physical size difference.

SEC absorbance profiles of the DPhPG liposomes and TX-100 solubilized PSIs acquired at 540 nm (optimal wavelength for liposome absorption) and 680 nm (optimal wavelength for PSI absorption) provide the controls for the PSI-proteoliposome fractionations and are as shown in Fig. 4a and b respectively. Shadowed fractions in Fig. 4b corresponds to detergent micelles. Comparing the SEC elution profiles of PSI-proteoliposomes with TX-100 solubilized PSIs (680 nm profiles in Fig. 4b) reveals that the PSI-proteoliposomes sample contains no excess detergent micelles due to a lack of an equivalent peak in their chromatogram. Furthermore, SEC elution profiles of PSI-proteoliposomes can be explicitly analyzed from the complete data matrix represented in Fig. 4c for CTrit = 8 and 12 mM (along rows) and wPLR = 0.26, 0.53 and 1.2 (along columns). It is noted that at wPLR = 0.26, choosing a higher detergent concentration within the stage II for protein insertions results in PSI-proteoliposomes with increasing absorbance intensities (~500 a.u.) for 680 nm (Fig. 4c, first row). On the other hand, at wPLR = 0.53, the intensities of 680 nm absorbance almost plateau to a consistent value of ~1000 a.u. for all three protein addition points at CTrit = 8 and 12 mM cases within the stage II of solubilization (Fig. 4c, second row). Finally, at wPLR = 1.2, the absorbance intensities for 680 nm indicate an almost consistent value of ~1200 a.u. for the different CTrit concentrations (Fig. 4c, third row). Here, our hypothesis is that once the first PSI is inserted within the bilayer, it disrupts the membrane integrity which essentially lowers the interfacial free energy for subsequent insertions.

Figure 4

SEC elution profiles of: (a) control DPhPG liposomes; (b) TX-100 solubilized PSI; and (c) PSI-proteoliposomes based on optimal wavelengths of absorbance at 540 (blue dashed lines) and 680 nm (red dot lines) for liposomes and PSI respectively. Shadowed fractions in (b) corresponds to detergent micelles. Shadowed fractions in (c) for PSI-proteoliposomes at wPLR = 1.2 correspond to individually unassociated PSIs or shredded liposomes.

Preliminary calculations for number of PSI per liposome in the solution results in 1, 2 and 5 PSI(s) per DPhPG liposome for wPLR = 0.26, 0.53 and 1.2 respectively. A careful inspection of these data in regards to the aforementioned SEC absorbance profiles for PSI-proteoliposomes suggest that at wPLR = 0.26, higher detergent concentrations within stage II for protein insertions result in higher number of liposomes carrying one PSI complex within the suspension. However, supplying more PSI proteins to the sample tends to saturate the maximum number of PSIs incorporated within the liposomes. Thus, PSI additions at any point within stage II of solubilization for wPLR = 0.53 and 1.2 results in approximately similar number of liposomes having two or five PSIs respectively. However, the shadowed fractions in the SEC chromatograms of PSI-proteoliposomes at wPLR = 1.2 shows that addition of PSIs at very high concentrations results in PSI-proteoliposomes with higher number of reconstituted PSI as well as individual unassociated PSIs and possibly shredded liposomes present in the sample. Figure 5 shows the relative absorbance intensities at 680 nm for the different PSI-proteoliposomes prepared under different CTrit concentrations and wPLR ratios as derived from the preceding SEC elution steps of purifications. Thus, at wPLR = 1.2, SEC fractions with highest overlapping absorbance intensities at 540 and 680 nm were collected. Afterward, the PSI-proteoliposome formation is characterized mainly by using the intrinsic features of PSI on these fractions.

Figure 5

Comparisons of the maximum absorbance intensities at 680 nm as obtained from the SEC elution profiles in Fig. 4.

Absorption spectroscopy of PSI/DPhPG proteoliposomes

PSI is active over 53% of the solar spectrum with known absorption peaks at around 440 and 680 nm contributed by Chlorophyll a (Chl a), and shoulders at around 475 and 650 nm originating from Chl b in the light-harvesting complexes60. Changes in the amplitude and wavelength shifts of absorption peaks of control PSI solution and reconstituted PSI suspension, is a good qualitative indicator of alteration in the microenvironment around the Chl a or Chl b molecules of PSI. Such qualitative indications of proteoliposome formation has also been demonstrated by earlier studies61.

The room temperature absorption spectra of TX-100 solubilized PSI solution in Fig. 6 demonstrates the signature peaks of PSI at 440 and 680 nm. The aforementioned peaks are absent in the absorption spectra of control DPhPG suspension. The absorption spectra of PSI-proteoliposome suspension (formed by PSI addition at the aforementioned two points in stage II) shows a significant blue shift in the blue region (peak shift from 440 to 418 nm) and a slight blue shift in the red region (peak shift from 680 to 674 nm). This blue shift is attributed to modification of the microenvironment around Chl a molecules within PSI-proteoliposomes (Fig. 6, left panel). Figure 6, right panel shows the room temperature absorption spectra collected for pure DPhPG liposome suspensions devoid of PSI after undergoing identical treatments of detergent removal. The data clearly confirms that the blue shifts are signatures arising from PSI-proteoliposme formations and not an artifact from other microenvironment alterations, such as presence of TX-100 detergent molecules.

Figure 6

Room temperature absorption spectra of DPhPG liposomes, solubilized PSI and PSI-proteoliposomes with left panel indicating PSI/DPhPG reconstituted at different point of second stage of solubilization and right panel indicating DPhPG liposome suspensions after detergent removal.

Fluorescence spectroscopy of PSI/DPhPG proteoliposomes

The efficiency of PSI photochemistry is known to benefit from the existence of long-wavelength Chl a molecules (red antennae Chls) that accumulate and stabilize the excitation energy for some period before it is used for the charge separation in P70062. The amount of red Chls vary among various species of PSI58,59,60. In particular, cyanobacteria contain relatively high amounts of such red Chls that show absorption at longer wavelengths than the primary Chls of the reaction center itself.

At room temperature, a wide range of the spectra for the absorbed light, including wavelengths longer than 750 nm, offer equally high probability of resulting in a stable P700 photooxidation. On the other side, at low temperatures (1 to 77 K), the red antennae Chls form a deep trap for the excitation energy that promote pathways for a strong increase in the fluorescence yield with red-shifted emission peaks61,62,63,64,65,66. For example, in trimeric PSI-reaction center of Synechococcus PCC 6803, the red antennae Chls absorb at ~708 nm and emit at ~721 nm and in the Spirulina trimeric PSI-RC, even more red shifted Chls absorb at ~715 nm which give rise to emission bands peaking at ~730 nm at 4 K67, 68. In the past, temperature dependence studies for steady-state emission of trimeric PSI of Synechococcus elongatus and quantum yield of P700 oxidation have showed that upon cooling from room temperature to ultra-low temperature (5 K), the emission peak wavelength shifts from 721 nm to 732 nm63. This study suggests that at 5 K almost 50% of the nonselective excitation energy becomes irreversibly trapped with the red antennae Chls, and hence, a considerable part of the excitation energy does not result in P700 photo-oxidation.

Moreover, detailed analysis of fluorescence emission peaks can provide complementary qualitative methods for the indirect evaluation of successful proteoliposome formations63. To this end, it has been frequently suggested by earlier studies that the appearance of an emission peak at 680 nm can be indicative of uncoupled Chls61, 64, 65 which is typically considered as a marker for proteoliposome formations.

In the present study, fluorescence emission spectra of control PSI (without detergent), PSI/detergent solutions as well as pure DPhPG suspensions upon excitation at 440 nm in room temperature conditions are shown in Fig. 7. Fluorescence emission spectra of PSI solution in the absence of detergents indicate two emission bands at around 690 nm and 712 nm (1100 and 1300 fluorescence counts, respectively). Fluorescence emission spectra of PSI solution, in the presence of detergents, indicate a similar emission band at 712 nm but a blue-shifted and enhanced emission band at ~685 nm (both ~1300 fluorescence counts). As expected, the emission band at 690 nm is not observed in the case of the pure liposome suspensions. After PSI incorporation, the proteoliposomes were further characterized by fluorescence emission spectroscopy at room temperature as shown in Fig. 8. Figure 8 (left panel) shows florescent emissions from proteoliposome suspensions after PSI reconstitution into detergent-destabilized DPhPG liposomes. Both the emission spectra for PSI-proteoliposomes formed from protein insertions at the intermediate (CTrit ~ 8 mM) and final (CTrit ~ 12 mM) states in stage II of solubilization indicate ~4 fold enhancements in their fluorescence intensities at the single dominant peak of 680 nm as compared to the control PSI case (see Fig. 8). Such enhanced fluorescence intensity at 680 nm observed for the TX-100 mediated proteoliposome suspension further confirms the successful proteoliposome formation. Furthermore, the lack of a 680 nm peak in the fluorescence emission spectra for DPhPG liposome suspensions after undergoing identical treatments for detergent removal (Fig. 8, right panel) further corroborates our hypothesis that observed Chl uncoupling is due to the proteoliposome formations. It needs to be pointed out here that the red shifted emission peaks at ~712 nm were not observed in the case of proteoliposome suspensions, which clearly indicates a higher amount of excitation energy being funneled towards P700 photooxidation instead of being lost as fluorescence emissions in the case of PSI devoid of membrane confinements. Thus, the aforementioned observations with PSI confinements in synthetic lipid scaffolds provide evidences that membrane confinements, beyond acting as the protein structural scaffolding, play a functional role in tuning the photoresponse in PSI-proteoliposome systems.

Figure 7

Room temperature fluorescence emission spectra of DPhPG liposomes, TX-100 solubilized PSI, and control PSI suspensions.

Figure 8

Room temperature fluorescence emission spectra of: (left panel) control PSI and PSI-proteoliposomes reconstituted at different point of second stage of solubilization; (right panel) control DPhPG liposomes and DPhPG liposomes suspension after detergent removal.

Atomic force microscopy of PSI/DPhPG proteoliposomes

A droplet of suspension after SEC column was drop cast on the gold wafers as mentioned in the methods section. AFM topographical characterization of this sample further confirms the successful PSI-proteoliposome formation. For ease of visualization, highly dilute samples from the SEC elution profiles were drop cast on to the substrates to create sparsely located supported collapsed bilayers. The AFM image of suspension treated gold substrate depicted in Fig. 9a shows two immobilized liposomes on the Au surface and barely any individual PSI. Zoomed-in AFM images in Fig. 9b clearly show serval membrane-bound PSIs as well as membrane-adsorbed PSIs as also indicated from the SEC elution profiles for the case studies with wPLR = 1.2 in Fig. 4c.

Figure 9

AFM images of the PSI-proteoliposomes supported on gold surfaces. (a) Bare gold substrate and PSI-proteoliposomes; (b) zoomed in images of PSI-proteoliposomes and representative cross-sectional surface profiles (1) for lipid bilayer assembled on gold surface (h1 ~ 5 nm); (2) for membrane-bound PSIs (h2 ~ 2 nm, d2 ~ 30 nm) and (3) for membrane-adsorbed PSI (h3 = 8.5 nm, d3 = 50 nm) are shown for the respective AFM image.

Detailed cross-sectional surface profiles from the aforementioned AFM image of supported liposomes have been reported in Fig. 9b, right panel. The cross-sectional profiles indicated an average bilayer height of h1 = 5 nm (shown with arrows marked on Fig. 9b) as expected for the lipid bilayer system. Furthermore, surface profiles of the immobilized liposome show an average height of h2 = 2 nm as well as average dimeter of d2 = 30 nm, which represent membrane-bound PSI and an average height of h3 = 8.5 nm as well as average dimeter of d2 = 50 nm, which represent membrane-adsorbed PSI (also indicated in Figure S1, Supplementary Material).


Considering the large negatively charged PG content in thylakoid membrane of PSI, we aim to introduce a choice of PG lipid for the study of reconstituted PSI proteins and subsequently systematically incorporate PSI complexes into synthetic membrane-bound structures that mimic the natural thylakoid membrane housing of PSI. Specifically, the current study presents the surfactant-induced membrane solubilization of a negatively charged phospholipid DPhPG by TX-100 commonly used for protein solubilization. Our results indicate that DPhPG liposomes maintain their vesicular structures intact at the initial stages of detergent addition. Furthermore, when solubilized with TX-100, the vesicles undergo the typical three-stage transition to the final micellar stages via mixed vesicles-micelles state. Based on the phase diagram obtained from the solubilization analysis, ideal concentration ratios for successful protein insertion were chosen and PSI complexes were incorporated into detergent-destabilized preformed-liposomes at various points of stage II of solubilization, using polystyrene beads to adsorb the detergent. Successful PSI-proteoliposome formation was analyzed via absorption and fluorescence spectroscopy measurements and atomic force microscopy.

A clear signature for successful PSI-proteoliposome formation is observed when a significant blue shift in the blue region (peak shift from 440 to 418 nm) and a slight blue shift in the red region of absorbance spectra and enhanced fluorescence intensity at 680 nm is observed for the TX-100 mediated proteoliposome suspension. AFM topographical characterization of supported liposomes revealed serval membrane-bound PSIs as well as membrane-adsorbed PSIs, further stablishing the successful PSI-proteoliposome formation. Such observations throw light on the alterations in chromophore-chromophore interactions and Chl a photoexcitation (as indicated by the enhanced 680 nm fluorescence emissions) owing to microenvironment changes arising from PSI confinement within fabricated proteoliposome structures. In turn, the current study paves the path for optimal tuning of photochemical responses of PSI complexes through rationally designed synthetic bilayer membrane confinements that mimic the natural thylakoid membrane housing of PSI.

Experimental Section


Dibasic (Na2HPO4) and monobasic (NaH2PO4) sodium phosphate with > 99% assay were purchased from Fisher Scientific, were used to prepare the aqueous buffer solutions of 200 mM Na-Phosphate with pH = 7.0. All aqueous buffer solutions of 200 mM Na-Phosphate were prepared in ultrapure de-ionized (D.I.) water with a resistivity of 18.2 MΩ cm at 25 °C (Millipore, Billerica, MA). Triton X-100 (10% w/v aqueous solution) was obtained from Anatrace. DPhPG (1,2-diphytanoyl-sn-glycero-3-phospho-(1′-rac-glycerol)) was purchased as lyophilized powders from Avanti Polar Lipids, Inc. Polycarbonate filters were also purchased from Avanti Polar Lipids, Inc. Lacey carbon-coated (200 mesh) copper grids were purchased from SPI supplies, USA.


Growth of T. elongatus and preparation of Photosystem I

The thermophilic cyanobacterium T. elongatus BP-1 was grown in 2 L airlift fermenters (Bethesda Research Labs, Bethesda MD) in NTA media. The details for the extraction and purification of the trimeric PSI complex from the grown T. elongatus cells are provided elsewhere.[21] Based on spectrophotometer measured chlorophyll concentrations, the concentration of the extracted PSI trimers was estimated to be around 1.0 × 10−6 mol L−1. PSI trimers were stored in aliquots of 1.5 mL at −80 °C for future use.

Liposome preparation

4 mg ml−1 lipid suspensions were prepared in 200 mM Na-Phosphate (pH = 7.0) buffer, followed by 3–4 freeze–thaw cycles to form multilamellar liposomes. These suspensions were then extruded through 100 nm pore sized filter using a mini-extruder (Avanti Polar Lipids) to form unilamellar vesicles at room temperature. The large unilamellar vesicle size of ~100 nm was confirmed from dynamic light scattering measurements. Further details regarding the lipid vesicle preparations can be found in previous literatures69.

Titrations of liposomes with detergent

Liposomes suspensions of 4 mg ml−1 were titrated by stepwise addition of several aliquots of 10% wt vol−1 of TX-100 to the liposome suspension. Detailed technical specifications regarding the physical properties of TX-100 are provided in Table S1 of Supplementary Material50, 70, 71. The effect of detergent on the liposomes was monitored using isothermal titration calorimetry.

Isothermal titration calorimetry (ITC)

A VP-ITC instrument produced by MicroCal Inc. (Northampton, MA) was used. The cell (volume 1.4 ml) was filled with 1 mM or 4 mM DPhPG vesicle suspension. The injection syringe was filled with 300 μl of 77 mM or 154 mM detergent solution, and a series of different volumes of injections were made at 30 min intervals. During each injection, surfactant was incorporated into the lipid membranes, leading to a characteristic heat signal. Integration of the signal yielded the heat change for each injection. The detailed ITC procedure of TX-100 mediated solubilization of DPhPG is provided in Supplementary Material.

Dynamic light scattering (DLS)

To analyze the liposome size alterations induced by the interaction with the detergent molecules, dynamic light scattering measurements (DLS) were carried out using a 632.8 nm-wavelength Zetasizer (Malvern Instruments). All DLS data were collected using a 178° backward scattering and averaged over four experimental runs each of which were summed up over 12 time correlograms fitted by the Zetasizer software. Due to the presence of bimodal or multimodal size distributions in some phase stages of the solubilization process, the DLS data are represented by more than one curve. All reported sizes are in terms of equivalent spherical hydrodynamic radius as estimated from Stokes–Einstein relation, and all DLS analyses are represented in terms of number distribution. The data analysis was carried out using the effective thermo-physical properties of 200 mM Na-Phosphate aqueous buffer solutions with pH = 7.0.

Cryo-transmission electron microscopy (Cryo-TEM)

Cryo-TEM allows direct investigation of samples in their vitrified state at low temperature. The sample preparation for cryo-TEM technique was carried out on 200-mesh carbon-coated holey grids. Before the sample application, a glow discharge was performed in order to hydrophilize the grid for optimal spreading of the aqueous sample72. The suspension was then drop cast onto TEM grids following which the excess sample was absorbed using a filter paper, leaving a thin film of sample in the holes of the grid. Then, the grid was mounted in a Gatan cryo-plunge 3 device and immediately frozen by plunging it in liquid ethane cooled by liquid nitrogen. After vitrification, the frozen-hydrated specimen was inserted into the Gatan cryo-transfer system and transferred into the TEM system. The imaging was carried out by a Zeiss Libra 200 MC TEM equipped with a model Gatan 915 cryo-specimen holder, at an acceleration voltage of 200 kV, and a temperature of about −170 °C under strict low dose conditions (<15 e Å−2). Images were recorded with a Gatan UltraScan 1000XP. Quantitative analyses on more than n >30 particles were used to measure the particle size at each stage of solubilization.

Reconstitution of PSI

Based on ITC measurements and phase diagram appropriate amounts of TX-100 were calculated to solubilize the DPhPG within stage II of solubilization. Subsequently, detergent-mediated protein reconstitution was performed by addition of TX-100 to preformed liposomes (4 mg mL−1). The solution was equilibrated for 60 min, mixed with the solubilized protein in 200 mM Na-Phosphate buffer (pH 7.0), and afterward, the mixture was incubated for 30 min at room temperature under gentle agitation. The final protein-to-lipid weight ratios used for all our studies here (marked as wPLR in all our discussions) were 0.26, 0.53 and 1.2. For PSI reconstitution, TX-100 was removed by a slow removal procedure in two successive steps, namely, additions of 15 mg Bio-Beads per milligram of TX-100 for 1 h at room temperature and 12 h at 4 °C, followed by an addition of 15 mg Bio-Beads per milligram of TX-100 at room temperature to ensure full detergent removal.

Size-exclusion chromatography (SEC)

SEC separations were carried out using a Sephacryl S-400 column attached to an AKTA purifier (GE). A total of 200 μl of sample was loaded at a flow rate of 0.5 ml min−1. The sample elution was monitored by optimal wavelength for liposome and PSI absorbance at 540 and 680 nm, thereby enabling the detection of both PSI and lipids.

Absorption spectroscopy measurements

Absorption spectra were recorded at room temperature with a hybrid multi-mode microplate reader (Make: Biotek; Model: Synergy H1). The incubation media contained 200 mM Na-Phosphate at pH 7.0. Absorption spectra for PSI and proteoliposome suspensions were specifically monitored at ~440 and 680 nm (details discussed in results section).

Fluorescence measurements

Room temperature fluorescence spectra of the samples were obtained using a multi-mode microplate reader (Make: PerkinElmer; Model: EnSpire) with 440 nm as the excitation wavelength. The fluorescence emission spectra were measured between 600 and 850 nm.

Atomic force microscopy (AFM)

AFM topographical characterization for PSI-proteoliposome Au substrates was carried out on commercial gold coated silicon wafers, Au thickness ~100 nm (purchased from Platypus Technologies). Gold wafers were cleaned by immersion in isopropanol (99.99% v/v) and de-ionized water for 10 min, and drying in an N2 stream. Surface immobilization of PSI-proteoliposomes was carried out by drop casting a few microliters of PSI-proteoliposome suspension after size exclusion chromatography on the Au wafers. The monolayer-covered gold wafer was allowed to dry for 1 h at 158 F and 1 h at room temperature and then rinsed in de-ionized water and dried in an N2 stream. Surface topography images were collected on an AFM instrument (NT-MDT) in the tapping mode using a silicon cantilever compatible with softer biological materials (NT-MDT; Model: NSG03). The tip had a force constant of 0.35–6.1 N m−1 along with a resonant frequency of 47–150 kHz.


  1. 1.

    Nelson, N. & Ben-Shem, A. The structure of photosystem I and evolution of photosynthesis. Bioessays 27, 914–922, doi:10.1002/bies.20278 (2005).

    CAS  Article  PubMed  Google Scholar 

  2. 2.

    Bennett, T. et al. Elucidating the role of methyl viologen as a scavenger of photoactivated electrons from photosystem I under aerobic and anaerobic conditions. Physical chemistry chemical physics: PCCP 18, 8512–8521, doi:10.1039/c6cp00049e (2016).

    ADS  CAS  Article  PubMed  Google Scholar 

  3. 3.

    White, G. F., Racher, K. I., Lipski, A., Hallett, F. R. & Wood, J. M. Physical properties of liposomes and proteoliposomes prepared from Escherichia coli polar lipids. Biochimica et Biophysica Acta (BBA)-Biomembranes 1468, 175–186, doi:10.1016/S0005-2736(00)00255-8 (2000).

    CAS  Article  Google Scholar 

  4. 4.

    Das, N., Murray, D. T. & Cross, T. A. Lipid bilayer preparations of membrane proteins for oriented and magic-angle spinning solid-state NMR samples. Nature protocols 8, 2256–2270, doi:10.1038/nprot.2013.129 (2013).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  5. 5.

    Zhou, H.-X. & Cross, T. A. Influences of membrane mimetic environments on membrane protein structures. Annu Rev Biophys 42, 361–392, doi:10.1146/annurev-biophys-083012-130326 (2013).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  6. 6.

    Lanyi, J. K. & Schobert, B. Structural changes in the L photointermediate of bacteriorhodopsin. J Mol Biol 365, 1379–1392, doi:10.1016/j.jmb.2006.11.016 (2007).

    CAS  Article  PubMed  Google Scholar 

  7. 7.

    Murata, K. et al. Structural determinants of water permeation through aquaporin-1. Nature 407, 599–605, doi:10.1038/35036519 (2000).

    ADS  CAS  Article  PubMed  Google Scholar 

  8. 8.

    Fleishman, S. J. et al. Quasi-symmetry in the cryo-EM structure of EmrE provides the key to modeling its transmembrane domain. J Mol Biol 364, 54–67, doi:10.1016/j.jmb.2006.08.072 (2006).

    CAS  Article  PubMed  Google Scholar 

  9. 9.

    Anfinsen, C. B. Principles that govern the folding of protein chains. Science 181, 223–230, doi:10.1126/science.181.4096.223 (1973).

    ADS  CAS  Article  PubMed  Google Scholar 

  10. 10.

    Ketchem, R. R., Lee, K. C., Huo, S. & Cross, T. A. Macromolecular structural elucidation with solid-state NMR-derived orientational constraints. J Biomol NMR 8, 1–14, doi:10.1007/bf00198135 (1996).

    CAS  Article  PubMed  Google Scholar 

  11. 11.

    Cross, T. A., Sharma, M., Yi, M. & Zhou, H.-X. Influence of solubilizing environments on membrane protein structures. Trends Biochem Sci 36, 117–125, doi:10.1016/j.tibs.2010.07.005 (2011).

    CAS  Article  PubMed  Google Scholar 

  12. 12.

    Sharma, M. et al. Insight into the mechanism of the influenza A proton channel from a structure in a lipid bilayer. Science (New York, N.Y.) 330, 509–512, doi:10.1126/science.1191750 (2010).

    ADS  CAS  Article  PubMed Central  Google Scholar 

  13. 13.

    Holm, P. J. et al. Structural basis for detoxification and oxidative stress protection in membranes. J Mol Biol 360, 934–945, doi:10.1016/j.jmb.2006.05.056 (2006).

    CAS  Article  PubMed  Google Scholar 

  14. 14.

    Jegerschöld, C. et al. Structural basis for induced formation of the inflammatory mediator prostaglandin E2. Proc Natl Acad Sci USA 105, 11110–11115, doi:10.1073/pnas.0802894105 (2008).

    ADS  Article  PubMed  PubMed Central  Google Scholar 

  15. 15.

    Das, B. B. et al. Structure determination of a membrane protein in proteoliposomes. J Am Chem Soc 134, 2047–2056, doi:10.1021/ja209464f (2012).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  16. 16.

    Grotjohann, I. & Fromme, P. Structure of cyanobacterial photosystem I. Photosynth Res 85, 51–72, doi:10.1007/s11120-005-1440-4 (2005).

    CAS  Article  PubMed  Google Scholar 

  17. 17.

    Golbeck, J. H. Photosystem I: The Light-Driven Plastocyanin: Ferredoxin Oxidoreductase. Vol. 24 (Springer, 2006).

  18. 18.

    Mukherjee, D., May, M. & Khomami, B. Detergent-protein interactions in aqueous buffer suspensions of Photosystem I (PS I). J Colloid Interf Sci 358, 477–484, doi:10.1016/j.jcis.2011.03.070 (2011).

    CAS  Article  Google Scholar 

  19. 19.

    Mukherjee, D., May, M., Vaughn, M., Bruce, B. D. & Khomami, B. Controlling the morphology of photosystem I assembly on thiol-activated Au substrates. Langmuir 26, 16048–16054, doi:10.1021/la102832x (2010).

    CAS  Article  PubMed  Google Scholar 

  20. 20.

    Mukherjee, D., Vaughn, M., Khomami, B. & Bruce, B. D. Modulation of cyanobacterial Photosystem I deposition properties on alkanethiolate Au substrate by various experimental conditions. Colloids and Surfaces B: Biointerfaces 88, 181–190 (2011).

    CAS  Article  PubMed  Google Scholar 

  21. 21.

    Saboe, P. O. et al. Two-dimensional protein crystals for solar energy conversion. Advanced Materials 26, 7064–+, doi:10.1002/adma.201402375 (2014).

  22. 22.

    Stieger, K. R. et al. Engineering of supramolecular photoactive protein architectures: the defined co-assembly of photosystem I and cytochrome c using a nanoscaled DNA-matrix. Nanoscale 8, 10695–10705, doi:10.1039/C6NR00097E (2016).

    ADS  CAS  Article  PubMed  Google Scholar 

  23. 23.

    Nowaczyk, M. M. & Plumere, N. Photosynthesis: Short circuit at the chlorophyll. Nat Chem Biol 12, 990–991, doi:10.1038/nchembio.2240 (2016).

    CAS  Article  PubMed  Google Scholar 

  24. 24.

    Zhang, J. Z. et al. Competing charge transfer pathways at the photosystem II-electrode interface. Nat Chem Biol 12, 1046–1052, doi:10.1038/nchembio.2192 (2016).

  25. 25.

    Sokol, K. P. et al. Rational wiring of photosystem II to hierarchical indium tin oxide electrodes using redox polymers. Energy & Environmental Science 9, 3698–3709, doi:10.1039/C6EE01363E (2016).

    CAS  Article  Google Scholar 

  26. 26.

    Kothe, T. et al. Engineered Electron-Transfer Chain in Photosystem 1 Based Photocathodes Outperforms Electron-Transfer Rates in Natural Photosynthesis. Chemistry – A European Journal 20, 11029–11034, doi:10.1002/chem.201402585 (2014).

    CAS  Article  Google Scholar 

  27. 27.

    Niroomand, H., Venkatesan, G. A., Sarles, S. A., Mukherjee, D. & Khomami, B. Lipid-detergent phase transitions during detergent-mediated liposome solubilization. The Journal of Membrane Biology 249, 523–538, doi:10.1007/s00232-016-9894-1 (2016).

    CAS  Article  PubMed  Google Scholar 

  28. 28.

    Baba, T. et al. Formation and characterization of planar lipid bilayer membranes from synthetic phytanyl-chained glycolipids. Biochimica et Biophysica Acta (BBA)-Biomembranes 1421, 91–102, doi:10.1016/S0005-2736(99)00114-5 (1999).

    CAS  Article  Google Scholar 

  29. 29.

    Mattei, B., França, A. D. C. & Riske, K. A. Solubilization of binary lipid mixtures by the detergent Triton X-100: the role of cholesterol. Langmuir 31, 378–386, doi:10.1021/la504004r (2015).

    CAS  Article  PubMed  Google Scholar 

  30. 30.

    Marsh, D. Handbook of Lipid Bilayers, Second Edition (CRC Press, 2013).

  31. 31.

    Marsh, D. Cholesterol-induced fluid membrane domains: a compendium of lipid-raft ternary phase diagrams. Biochimica et Biophysica Acta (BBA)-Biomembranes 1788, 2114–2123, doi:10.1016/j.bbamem.2009.08.004 (2009).

    CAS  Article  Google Scholar 

  32. 32.

    Findlay, E. J. & Barton, P. G. Phase behavior of synthetic phosphatidylglycerols and binary-mixtures with phosphatidylcholines in presence and absence of calcium-ions. Biochemistry 17, 2400–2405, doi:10.1021/bi00605a023 (1978).

    CAS  Article  PubMed  Google Scholar 

  33. 33.

    Garidel, P., Johann, C., Mennicke, L. & Blume, A. The mixing behavior of pseudobinary phosphatidylcholine phosphatidylglycerol mixtures as a function of pH and chain length. European Biophysics Journal with Biophysics Letters 26, 447–459, doi:10.1007/s002490050099 (1997).

    CAS  Article  Google Scholar 

  34. 34.

    Blosser, M. C. et al. Minimal effect of lipid charge on membrane miscibility phase behavior in three ternary systems. Biophysical Journal 104, 2629–2638, doi:10.1016/j.bpj.2013.04.055 (2013).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  35. 35.

    Deamer, D. & Bangham, A. D. Large volume liposome by an ether vaporization method. Biochimica et Biophysica Acta 443, 629–634, doi:10.1016/0005-2736(76)90483-1 (1976).

    CAS  PubMed  Google Scholar 

  36. 36.

    Szoka, F. & Papahadjopoulos, D. Comprehensive properties and methods of preparation of lipid vesicles (liposomes). Annual Review of Biophysics and Bioengineering 9, 467–508, doi:10.1146/ (1980).

    CAS  Article  PubMed  Google Scholar 

  37. 37.

    Rigaud, J. L. & Levy, D. Reconstitution of membrane proteins into liposomes. Liposomes, Pt B 372, 65–86 (2003).

    CAS  Article  Google Scholar 

  38. 38.

    Pata, V., Ahmed, F., Discher, D. E. & Dan, N. Membrane solubilization by detergent: resistance conferred by thickness. Langmuir 20, 3888–3893, doi:10.1021/la035734e (2004).

    CAS  Article  PubMed  Google Scholar 

  39. 39.

    Kragh-Hansen, U., le Maire, M. & Moller, J. V. The mechanism of detergent solubilization of liposomes and protein-containing membranes. Biophysical Journal 75, 2932–2946 (1998).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  40. 40.

    Lopez, O. et al. Octyl glucoside-mediated solubilization and reconstitution of liposomes: Structural and kinetic aspects. Journal of Physical Chemistry B 105, 9879–9886, doi:10.1021/jp010273w (2001).

    CAS  Article  Google Scholar 

  41. 41.

    Rajarathnam, K. & Rösgen, J. Isothermal titration calorimetry of membrane proteins — progress and challenges. Biochimica et Biophysica Acta (BBA)-Biomembranes 1838, 69–77, doi:10.1016/j.bbamem.2013.05.023 (2014).

    CAS  Article  Google Scholar 

  42. 42.

    Perspicace, S. et al. Isothermal titration calorimetry with micelles: thermodynamics of inhibitor binding to carnitine palmitoyltransferase 2 membrane protein. FEBS Open Bio 3, 204–211, doi:10.1016/j.fob.2013.04.003 (2013).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  43. 43.

    Heerklotz, H. & Seelig, J. Titration calorimetry of surfactant–membrane partitioning and membrane solubilization. Biochimica et Biophysica Acta (BBA)-Biomembranes 1508, 69–85, doi:10.1016/S0304-4157(00)00009-5 (2000).

    CAS  Article  Google Scholar 

  44. 44.

    Heerklotz, H. The microcalorimetry of lipid membranes. Journal of Physics: Condensed Matter 16, R441 (2004).

    ADS  CAS  Google Scholar 

  45. 45.

    Ball, V. & Maechling, C. Isothermal microcalorimetry to investigate non specific interactions in biophysical chemistry. International Journal of Molecular Sciences 10, 3283 (2009).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  46. 46.

    Draczkowski, P., Matosiuk, D. & Jozwiak, K. Isothermal titration calorimetry in membrane protein research. Journal of Pharmaceutical and Biomedical Analysis 87, 313–325, doi:10.1016/j.jpba.2013.09.003 (2014).

    CAS  Article  PubMed  Google Scholar 

  47. 47.

    Ghai, R., Falconer, R. J. & Collins, B. M. Applications of isothermal titration calorimetry in pure and applied research—survey of the literature from 2010. Journal of Molecular Recognition 25, 32–52, doi:10.1002/jmr.1167 (2012).

    CAS  Article  PubMed  Google Scholar 

  48. 48.

    Deleu, M., Crowet, J.-M., Nasir, M. N. & Lins, L. Complementary biophysical tools to investigate lipid specificity in the interaction between bioactive molecules and the plasma membrane: a review. Biochimica et Biophysica Acta (BBA)-Biomembranes 1838, 3171–3190, doi:10.1016/j.bbamem.2014.08.023 (2014).

    CAS  Article  Google Scholar 

  49. 49.

    Lambert, O., Levy, D., Ranck, J.-L., Leblanc, G. & Rigaud, J.-L. A new “gel-like” phase in dodecyl maltoside–lipid mixtures: implications in solubilization and reconstitution studies. Biophysical Journal 74, 918–930, doi:10.1016/S0006-3495(98)74015-9 (1998).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  50. 50.

    Knol, J., Sjollema, K. & Poolman, B. Detergent-mediated reconstitution of membrane proteins. Biochemistry 37, 16410–16415, doi:10.1021/bi981596u (1998).

    CAS  Article  PubMed  Google Scholar 

  51. 51.

    Seddon, A. M., Curnow, P. & Booth, P. J. Membrane proteins, lipids and detergents: not just a soap opera. Biochimica et Biophysica Acta (BBA)-Biomembranes 1666, 105–117, doi:10.1016/j.bbamem.2004.04.011 (2004).

    CAS  Article  Google Scholar 

  52. 52.

    Geertsma, E. R., Mahmood, N., Schuurman-Wolters, G. K. & Poolman, B. Membrane reconstitution of ABC transporters and assays of translocator function. Nature Protocols 3, 256–266, doi:10.1038/nprot.2007.519 (2008).

    CAS  Article  PubMed  Google Scholar 

  53. 53.

    Silvius, J. R. Solubilization and functional reconstitution of biomembrane components. Annual Review of Biophysics and Biomolecular Structure 21, 323–348, doi:10.1146/annurev.biophys.21.1.323 (1992).

    CAS  Article  PubMed  Google Scholar 

  54. 54.

    Lichtenberg, D., Robson, R. J. & Dennis, E. A. Solubilization of phospholipids by detergents structural and kinetic aspects. Biochimica et Biophysica Acta (BBA)-Reviews on Biomembranes 737, doi:10.1016/0304-4157(83)90004-7 (1983).

  55. 55.

    Lichtenberg, D., Opatowski, E. & Kozlov, M. M. Phase boundaries in mixtures of membrane-forming amphiphiles and micelle-forming amphiphiles. Biochimica et Biophysica Acta (BBA)-Biomembranes 1508, 1–19, doi:10.1016/S0304-4157(00)00004-6 (2000).

    CAS  Article  Google Scholar 

  56. 56.

    Lichtenberg, D., Ahyayauch, H. & Goni, F. M. The mechanism of detergent solubilization of lipid bilayers. Biophysical Journal 105, 1090–1090, doi:10.1016/j.bpj.2013.07.045 (2013).

    Article  Google Scholar 

  57. 57.

    Lichtenberg, D., Ahyayauch, H., Alonso, A. & Goñi, F. M. Detergent solubilization of lipid bilayers: a balance of driving forces. Trends Biochem Sci 38, 85–93, doi:10.1016/j.tibs.2012.11.005 (2013).

    CAS  Article  PubMed  Google Scholar 

  58. 58.

    Stuart, M. C. A. & Boekema, E. J. Two distinct mechanisms of vesicle-to-micelle and micelle-to-vesicle transition are mediated by the packing parameter of phospholipid–detergent systems. Biochimica et Biophysica Acta (BBA)-Biomembranes 1768, 2681–2689, doi:10.1016/j.bbamem.2007.06.024 (2007).

    CAS  Article  Google Scholar 

  59. 59.

    Sudbrack, T. P., Archilha, N. L., Itri, R. & Riske, K. A. Observing the solubilization of lipid bilayers by detergents with optical microscopy of GUVs. The Journal of Physical Chemistry B 115, 269–277, doi:10.1021/jp108653e (2011).

    CAS  Article  PubMed  Google Scholar 

  60. 60.

    Caffarri, S., Tibiletti, T., Jennings, R. C. & Santabarbara, S. A comparison between plant photosystem I and photosystem II architecture and functioning. Current Protein & Peptide Science 15, 296–331 (2014).

    CAS  Article  Google Scholar 

  61. 61.

    Yang, Z. L., Su, X. H., Wu, F., Gong, Y. D. & Kuang, T. Y. Effect of phosphatidylglycerol on molecular organization of photosystem I. Biophysical Chemistry 115, 19–27, doi:10.1016/j.bpc.2005.01.004 (2005).

    CAS  Article  PubMed  Google Scholar 

  62. 62.

    Papageorgiou, G. C. In Chlorophyll a Fluorescence: A Signature of Photosynthesis (eds George Christos Papageorgiou & Govindjee) 43–63 (Springer Netherlands, 2004).

  63. 63.

    Pålsson, L. O. et al. Energy transfer and charge separation in photosystem I: P700 oxidation upon selective excitation of the long-wavelength antenna chlorophylls of Synechococcus elongatus. Biophys. J. 74, 2611–2622 (1998).

    Article  PubMed  PubMed Central  Google Scholar 

  64. 64.

    Holzwarth, A. R., Schatz, G., Brock, H. & Bittersmann, E. Energy transfer and charge separation kinetics in photosystem I. Biophys. J. 64, 1813–1826, doi:10.1016/S0006-3495(93)81552-2 (1993).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  65. 65.

    Nieder, J. B., Bittl, R. & Brecht, M. Fluorescence studies into the effect of plasmonic interactions on protein function. Angewandte Chemie International Edition 49, 10217–10220, doi:10.1002/anie.201002172 (2010).

    CAS  Article  PubMed  Google Scholar 

  66. 66.

    Ashraf, I. et al. Temperature dependence of metal-enhanced fluorescence of photosystem I from Thermosynechococcus elongatus. Nanoscale 9, 4196–4204, doi:10.1039/C6NR08762K (2017).

    CAS  Article  PubMed  Google Scholar 

  67. 67.

    Gobets, B. et al. Site selected polarized fluorescence spectroscopy of photosystem I particles isolated from the cyanobacteria Spirulina platensis. Prog. Biophys. Mol. Biol. 65, PE221 (1996).

    ADS  Google Scholar 

  68. 68.

    Gobets, B. et al. Polarized site-selected fluorescence spectroscopy of isolated photosystem-I particles. Biochimica Et Biophysica Acta-Bioenergetics 1188, 75–85, doi:10.1016/0005-2728(94)90024-8 (1994).

    CAS  Article  Google Scholar 

  69. 69.

    Lichtenberg, D. & Barenholz, Y. in Methods of Biochemical Analysis 337–462 (John Wiley & Sons, Inc., 2006).

  70. 70.

    Helenius, A., McCaslin, D. R., Fries, E. & Tanford, C. Properties of detergents. Methods in enzymology 56, 734–749 (1979).

    CAS  Article  PubMed  Google Scholar 

  71. 71.

    Helenius, A. & Simons, K. Solubilization of membranes by detergents. Biochimica et Biophysica Acta 415, 29–79, doi:10.1016/0304-4157(75)90016-7 (1975).

    CAS  Article  PubMed  Google Scholar 

  72. 72.

    Kuntsche, J., Horst, J. C. & Bunjes, H. Cryogenic transmission electron microscopy (cryo-TEM) for studying the morphology of colloidal drug delivery systems. International Journal of Pharmaceutics 417, 120–137, doi:10.1016/j.ijpharm.2011.02.001 (2011).

    CAS  Article  PubMed  Google Scholar 

Download references


The authors would like to acknowledge the University of Tennessee Advanced Microscopy, Imaging Center and Bioanalytical Resources Facility for instrument use, Dr. John Dunlap and Dr. Edward Wright for scientific and technical assistance. We thank Dr. Mitchel J. Doktycz and Mrs. Carmen M. Foster at Biosciences Division at ORNL for their technical assistance in fluorescence spectroscopy measurements. Also we thank Guru Venkatesan and Dr. Stephen Sarles for providing us the liposome suspension. This work was funded by Sustainable Energy Education and Research Center (SEERC) at University of Tennessee, Knoxville.

Author information




H.N. designed and performed all the experiments. D.M. and B.K. designed and supervised the research. All authors contributed to the data interpretation and analyses. All authors wrote and reviewed the manuscript.

Corresponding authors

Correspondence to Dibyendu Mukherjee or Bamin Khomami.

Ethics declarations

Competing Interests

The authors declare that they have no competing interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Niroomand, H., Mukherjee, D. & Khomami, B. Tuning the photoexcitation response of cyanobacterial Photosystem I via reconstitution into Proteoliposomes. Sci Rep 7, 2492 (2017).

Download citation


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing