Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Stretchable pumps for soft machines

This article has been updated

Abstract

Machines made of soft materials bridge life sciences and engineering1. Advances in soft materials have led to skin-like sensors and muscle-like actuators for soft robots and wearable devices1,2,3. Flexible or stretchable counterparts of most key mechatronic components have been developed4,5, principally using fluidically driven systems6,7,8; other reported mechanisms include electrostatic9,10,11,12, stimuli-responsive gels13,14 and thermally responsive materials such as liquid metals15,16,17 and shape-memory polymers18. Despite the widespread use of fluidic actuation, there have been few soft counterparts of pumps or compressors, limiting the portability and autonomy of soft machines4,8. Here we describe a class of soft-matter bidirectional pumps based on charge-injection electrohydrodynamics19. These solid-state pumps are flexible, stretchable, modular, scalable, quiet and rapid. By integrating the pump into a glove, we demonstrate wearable active thermal management. Embedding the pump in an inflatable structure produces a self-contained fluidic ‘muscle’. The stretchable pumps have potential uses in wearable laboratory-on-a-chip and microfluidic sensors, thermally active clothing and autonomous soft robots.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Stretchable pumps based on charge-injection EHD.
Fig. 2: Performance of the stretchable EHD pumps.
Fig. 3: Stretchable pump embedded in a textile glove for on-body thermal regulation.
Fig. 4: Fluidic muscles obtained by bonding a stretchable pump to a bending fluidic actuator.

Similar content being viewed by others

Data availability

All data are available from the corresponding authors upon reasonable request.

Change history

  • 27 August 2019

    Owing to a technical error, this Letter was not published online on 14 August 2019, as originally stated, and was instead first published online on 15 August 2019. The Letter has been corrected online.

References

  1. Rus, D. & Tolley, M. T. Design, fabrication and control of soft robots. Nature 521, 467–475 (2015).

    Article  CAS  ADS  Google Scholar 

  2. Laschi, C., Mazzolai, B. & Cianchetti, M. Soft robotics: technologies and systems pushing the boundaries of robot abilities. Sci. Robot. 1, eaah3690 (2016).

    Article  Google Scholar 

  3. Amjadi, M., Kyung, K.-U., Park, I. & Sitti, M. Stretchable, skin-mountable, and wearable strain sensors and their potential applications: a review. Adv. Funct. Mater. 26, 1678–1698 (2016).

    Article  CAS  Google Scholar 

  4. Hines, L., Petersen, K., Lum, G. Z. & Sitti, M. Soft actuators for small-scale robotics. Adv. Mater. 29, 1603483 (2017).

    Article  Google Scholar 

  5. Shintake, J., Cacucciolo, V., Floreano, D. & Shea, H. Soft robotic grippers. Adv. Mater. 30, 1707035 (2018).

    Article  Google Scholar 

  6. Suzumori, K., Iikura, S. & Tanaka, H. Development of flexible microactuator and its applications to robotic mechanisms. In Proc. 1991 IEEE International Conf. Robotics and Automation Vol. 2, 1622–1627 (IEEE, 1991).

  7. Suzumori, K., Wada, A. & Wakimoto, S. New mobile pressure control system for pneumatic actuators, using reversible chemical reactions of water. Sens. Actuators A 201, 148–153 (2013).

    Article  CAS  Google Scholar 

  8. Polygerinos, P. et al. Soft robotics: review of fluid-driven intrinsically soft devices; manufacturing, sensing, control, and applications in human–robot interaction. Adv. Eng. Mater. 19, 1700016 (2017).

    Article  Google Scholar 

  9. Keplinger, C. et al. Stretchable, transparent, ionic conductors. Science 341, 984–987 (2013).

    Article  CAS  ADS  Google Scholar 

  10. Viry, L. et al. Flexible three-axial force sensor for soft and highly sensitive artificial touch. Adv. Mater. 26, 2659–2664 (2014).

    Article  CAS  Google Scholar 

  11. Rosset, S. & Shea, H. R. Small, fast, and tough: shrinking down integrated elastomer transducers. Appl. Phys. Rev. 3, 031105 (2016).

    Article  ADS  Google Scholar 

  12. Acome, E. et al. Hydraulically amplified self-healing electrostatic actuators with muscle-like performance. Science 359, 61–65 (2018).

    Article  CAS  ADS  Google Scholar 

  13. Dong, L., Agarwal, A. K., Beebe, D. J. & Jiang, H. Adaptive liquid microlenses activated by stimuli-responsive hydrogels. Nature 442, 551–554 (2006).

    Article  CAS  ADS  Google Scholar 

  14. Kim, Y. S. et al. Thermoresponsive actuation enabled by permittivity switching in an electrostatically anisotropic hydrogel. Nat. Mater.  14, 1002–1007 (2015). 

    Article  ADS  Google Scholar 

  15. Majidi, C., Kramer, R. & Wood, R. J. A non-differential elastomer curvature sensor for softer-than-skin electronics. Smart Mater. Struct. 20, 105017 (2011).

    Article  ADS  Google Scholar 

  16. Cooper, C. B. et al. Stretchable capacitive sensors of torsion, strain, and touch using double helix liquid metal fibers. Adv. Funct. Mater. 27, 1605630 (2017).

    Article  Google Scholar 

  17. Pan, C. et al. Visually imperceptible liquid-metal circuits for transparent, stretchable electronics with direct laser writing. Adv. Mater. 30, 1706937 (2018).

    Article  Google Scholar 

  18. Besse, N., Rosset, S., Zarate, J. J. & Shea, H. Flexible active skin: large reconfigurable arrays of individually addressed shape memory polymer actuators. Adv. Mater. Technol. 2, 1700102 (2017).

    Article  Google Scholar 

  19. Ramos, A. Electrokinetics and Electrohydrodynamics in Microsystems (Springer, 2011).

  20. Iverson, B. D. & Garimella, S. V. Recent advances in microscale pumping technologies: a review and evaluation. Microfluid. Nanofluidics 5, 145–174 (2008).

    Article  CAS  Google Scholar 

  21. Pearson, M. & Seyed-Yagoobi, J. Advances in electrohydrodynamic conduction pumping. IEEE Trans. Dielectr. Electr. Insul. 16, 424–434 (2009).

    Article  Google Scholar 

  22. Darabi, J. & Wang, H. Development of an electrohydrodynamic injection micropump and its potential application in pumping fluids in cryogenic cooling systems. J. Microelectromech. Syst. 14, 747–755 (2005).

    Article  CAS  Google Scholar 

  23. Chang, S. T., Paunov, V. N., Petsev, D. N. & Velev, O. D. Remotely powered self-propelling particles and micropumps based on miniature diodes. Nat. Mater. 6, 235–240 (2007).

    Article  CAS  ADS  Google Scholar 

  24. Kim, J. W., Suzuki, T., Yokota, S. & Edamura, K. Tube-type micropump by using electro-conjugated fluid (ECF). Sens. Actuators A 174, 155–161 (2012).

    Article  CAS  Google Scholar 

  25. Cacucciolo, V., Shigemune, H., Cianchetti, M., Laschi, C. & Maeda, S. Conduction electrohydrodynamics with mobile electrodes: a novel actuation system for untethered robots. Adv. Sci. 4, 1600495 (2017).

    Article  Google Scholar 

  26. Wehner, M. et al. Pneumatic energy sources for autonomous and wearable soft robotics. Soft Robot. 1, 263–274 (2014).

    Article  Google Scholar 

  27. Rosset, S. & Shea, H. R. Flexible and stretchable electrodes for dielectric elastomer actuators. Appl. Phys. A 110, 281–307 (2013).

    Article  CAS  ADS  Google Scholar 

  28. Shintake, J., Rosset, S., Schubert, B., Floreano, D. & Shea, H. Versatile soft grippers with intrinsic electroadhesion based on multifunctional polymer actuators. Adv. Mater. 28, 231–238 (2016).

    Article  CAS  Google Scholar 

  29. Wehner, M. et al. An integrated design and fabrication strategy for entirely soft, autonomous robots. Nature 536, 451–455 (2016).

    Article  CAS  ADS  Google Scholar 

  30. Laser, D. J. & Santiago, J. G. A review of micropumps. J. Micromech. Microeng. 14, R35–R64 (2004).

    Article  Google Scholar 

  31. Wang, Y.-N. & Fu, L.-M. Micropumps and biomedical applications: a review. Microelectron. Eng. 195, 121–138 (2018).

    Article  CAS  Google Scholar 

  32. Rosset, S., Araromi, O. A., Schlatter, S. & Shea, H. R. Fabrication process of silicone-based dielectric elastomer actuators. J. Vis. Exp. 108, 53423 (2016).

    Google Scholar 

  33. Schlatter, S., Illenberger, P. & Rosset, S. Peta-pico-Voltron: an open-source high voltage power supply. HardwareX 4, e00039 (2018).

    Article  Google Scholar 

  34. MGD 1000S specification. Available at https://www.micropumps.co.uk/TCSMGD1000range.htm

  35. McMaster-Carr single tank portable air compressor specification. Available at: https://www.mcmaster.com/9965k62

  36. Olsson, A., Enoksson, P., Stemme, G. & Stemme, E. Micromachined flat-walled valveless diffuser pumps. J. Microelectromech. Syst. 6, 161–166 (1997).

    Article  CAS  Google Scholar 

  37. Jang, L.-S. et al. A stand-alone peristaltic micropump based on piezoelectric actuation. Biomed. Microdevices 9, 185–194 (2007).

    Article  Google Scholar 

  38. Lei, K. F. et al. A vortex pump-based optically-transparent microfluidic platform for biotech and medical applications. Proc. Inst. Mech. Eng. H 221, 129–141 (2007).

    Article  CAS  Google Scholar 

  39. Kawun, P., Leahy, S. & Lai, Y. A thin PDMS nozzle/diffuser micropump for biomedical applications. Sens. Actuators A 249, 149–154 (2016).

    Article  CAS  Google Scholar 

  40. Richter, A., Plettner, A., Hofmann, K. A. & Sandmaier, H. A micromachined electrohydrodynamic (EHD) pump. Sens. Actuators A 29, 159–168 (1991).

    Article  CAS  Google Scholar 

  41. Ahn, S.-H. & Kim, Y.-K. Fabrication and experiment of a planar micro ion drag pump. Sens. Actuators A 70, 1–5 (1998).

    Article  CAS  Google Scholar 

  42. Chen, L., Wang, H., Ma, J., Wang, C. & Guan, Y. Fabrication and characterization of a multi-stage electroosmotic pump for liquid delivery. Sens. Actuators B 104, 117–123 (2005).

    Article  Google Scholar 

  43. Chen, C.-H. & Santiago, J. G. A planar electroosmotic micropump. J. Microelectromech. Syst. 11, 672–683 (2002).

    Article  CAS  Google Scholar 

  44. Zengerle, R., Ulrich, J., Kluge, S., Richter, M. & Richter, A. A bidirectional silicon micropump. Sens. Actuators A Phys. 50, 81–86 (1995).

    Article  CAS  Google Scholar 

  45. Homsy, A., Linder, V., Lucklum, F. & de Rooij, N. F. Magnetohydrodynamic pumping in nuclear magnetic resonance environments. Sens. Actuators B 123, 636–646 (2007).

    Article  CAS  Google Scholar 

  46. Ashouri, M., Shafii, M. B. & Moosavi, A. Theoretical and experimental studies of a magnetically actuated valveless micropump. J. Micromech. Microeng. 27, 015016 (2016).

    Article  Google Scholar 

  47. Tanaka, Y., Noguchi, Y., Yalikun, Y. & Kamamichi, N. Earthworm muscle driven bio-micropump. Sens. Actuators B 242, 1186–1192 (2017).

    Article  CAS  Google Scholar 

  48. Van de Pol, F. C. M., Van Lintel, H. T. G., Elwenspoek, M. & Fluitman, J. H. J. A thermopneumatic micropump based on micro-engineering techniques. Sens. Actuators A 21, 198–202 (1990).

    Article  Google Scholar 

  49. Sim, W. Y., Yoon, H. J., Jeong, O. C. & Yang, S. S. A phase-change type micropump with aluminum flap valves. J. Micromech. Microeng. 13, 286–294 (2003).

    Article  ADS  Google Scholar 

  50. Jung, J.-Y. & Kwak, H.-Y. Fabrication and testing of bubble powered micropumps using embedded microheater. Microfluid. Nanofluidics 3, 161–169 (2007).

    Article  CAS  Google Scholar 

  51. Shaegh, S. A. M. et al. Plug-and-play microvalve and micropump for rapid integration with microfluidic chips. Microfluid. Nanofluidics 19, 557–564 (2015).

    Article  CAS  Google Scholar 

  52. Jeong, O. C., Park, S. W., Yang, S. S. & Pak, J. J. Fabrication of a peristaltic PDMS micropump. Sens. Actuators A 123–124, 453–458 (2005).

    Article  Google Scholar 

  53. Jahanshahi, A., Axisa, F. & Vanfleteren, J. Fabrication of an implantable stretchable electro-osmosis pump. In Microfluidics, BioMEMS, and Medical Microsystems IX 7929, 79290R (International Society for Optics and Photonics, 2011).

  54. Stergiopulos, C., Vogt, D., Tolley, M. & Wehner, M. A soft combustion-driven pump for soft robots. Proc. ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS2014, 1–6 (2014).

  55. Mac Murray, B. C. et al. Poroelastic foams for simple fabrication of complex soft robots. Adv. Mater. 27, 6334–6340 (2015).

    Article  Google Scholar 

  56. Loepfe, M., Schumacher, C. M. & Stark, W. J. Design, performance and reinforcement of bearing-free soft silicone combustion-driven pumps. Ind. Eng. Chem. Res. 53, 12519–12526 (2014).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

We thank H. Shigemune for discussions about EHD, M. Imboden for assistance with the thermal regulation experiments and O. Gudozhnik for developing the 5 kV and 6 kV supplies. We acknowledge financial support from JSPS KAKENHI under grants 16H04306, 18H05473 and 19H05328; MEXT/JSPS under Leading Initiative for Excellent Young Researchers; Swiss National Science Foundation through NCCR Robotics; Japanese TOBITATE! Young Ambassador Program; Hasler Foundation Cyber-Human Systems programme; and the BioRobotics Institute of Scuola Superiore Sant’Anna, Pisa for funding V.C.’s initial stay at EPFL in 2016.

Author information

Authors and Affiliations

Authors

Contributions

V.C., J.S., S.M., D.F. and H.S. conceived the project. V.C. and J.S. designed and characterized the devices. V.C., J.S. and Y.K. fabricated the devices. V.C. and H.S. analysed the data. S.M., H.S. and D.F. contributed to data interpretation. V.C., J.S. and H.S. wrote the paper. All authors provided feedback and agree with the final version of the manuscript.

Corresponding authors

Correspondence to Vito Cacucciolo or Herbert Shea.

Ethics declarations

Competing interests

V.C., J.S., S.M., D.F. and H.S declare financial interest in form of a patent application. Y.K. declares no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data figures and tables

Extended Data Fig. 1 The two different electrode geometries and corresponding electrohydrodynamic (EHD) mechanisms used in this work.

a, Conduction pumping, with inclined capacitors. Heterocharge layers form near the electrodes. These layers are characterized by a higher concentration of ions of opposite polarity with respect to the nearest electrode. As a consequence, these ions are attracted to the nearest electrode, where they discharge. The inclined geometry of the capacitors allows net flow thanks to the in-flow component of the electric field near to the electrode surface. b, Charge injection, with interdigitated electrodes. When the electric field is high enough to overcome the energy barrier, field emission takes place, with electrons tunnelling from the cathode into the dielectric liquid. The generated ions are accelerated by the electric field until they discharge at the anode, transferring momentum to neutral liquid molecules along the way.

Extended Data Fig. 2 Fabrication process for stretchable pumps using the interdigitated design.

a, Fabrication process for the C pump. i, The fabrication of the electrode layers starts by blade-casting a carbon-based electrode membrane with a thickness of 30 μm on a poly(ethylene terephthalate) (PET) support, which is then cured at 80 °C for 2 h. ii, A 400 μm PDMS membrane is cast on the top of the electrode and cured at 80 °C for 1 h. iii, The sample is turned over to expose the electrode membrane, which is then processed (iv) by laser engraving to define the interdigitated pattern. This process allows the manufacturing of many samples in parallel, up to 24 samples with our equipment at EPFL-LMTS. The central photo shows eight sets of interdigitated electrodes at this stage. v, The channel layer, consisting of a 500-μm-thick laser-cut PDMS membrane, is bonded to the bottom electrode layer by a silicone adhesive film. vi, The top electrode layer, with two laser-cut holes for fluidic connection, is bonded on the top of the channel layer. vii, The PET supports are removed, and the C stretchable pump, shown in the bottom photo, is ready to use. b, Fabrication process for the Ag pump. i, The fabrication starts by blade-casting and curing (80 °C, 1 h) a 400 μm PDMS membrane. ii, On the PDMS, a silver-based stretchable ink is printed through a 23-μm-thick Mylar mask and cured at 80 °C for 3 h. iii, After removal of the mask, the bottom electrode layer is bonded to the 500-μm-thick channel layer with a silicone adhesive film. iv, The top electrode layer, with two laser-cut holes for fluidic connection, is bonded on the top of the channel layer. v, The PET supports are removed, and the Ag stretchable pump is ready to use.

Extended Data Fig. 3 Four generations of stretchable pumps plotting generated pressure vs. applied voltage.

The ‘inclined 1’ and ‘inclined 2’ generations have inclined capacitors as the electrode configuration. Inclined 2 is a scaled version of inclined 1, with half the channel size, half the gap between opposite electrodes and many more electrode pairs (43 rather than 5). The interdigitated generations have the same channel size and gap between opposite electrodes as inclined 2 but use interdigitated electrodes rather than inclined capacitors. The C version has laser-engraved carbon-silicone composite electrodes and uses 3M Novec 7100 as the dielectric fluid. The Ag version has mask-printed silver-based electrodes and uses 3M Fluorinert FC-40 as the dielectric fluid. The Ag devices can sustain higher fields than the C devices, thanks to the different dielectric liquid and to the different electrode fabrication method.

Extended Data Fig. 4 A 5 kV programmable power supply weighing 16 g, including Li-ion battery.

This custom-made power supply is based on an EMCO d.c.–d.c. converter from XP-power (https://www.xppower.com/Product/A-Series) and includes a microcontroller to programme the output. Dimensions are 5 cm × 4 cm × 0.8 cm. In this work, we also used a 6 kV, 20 g version. For a given voltage, pump performance is the same when driven by these low-mass power supplies or by larger laboratory power supplies, because the current draw from the pumps is far less than the maximum current that the d.c.–d.c. converter can supply.

Extended Data Fig. 5 Three stretchable pumps connected in series.

The data shown in Fig. 2f were taken using these three pumps connected in series to increase pressure. Alternatively, pumps could be connected in parallel for higher flow rate. Each pump is 7.5 cm long.

Extended Data Table 1 Comparison of pump performance

Supplementary information

Video 1

Stretchable pump stretched and twisted. The stretchable pump is made of a transparent elastomer (Dow Corning Sylgard 184 PDMS) and stretchable electrodes (carbon- or silver-based). The video shows a pump being extensively and repeatedly deformed without damage.

Video 2

Untethered operation of a stretchable pump inflating a heart-shaped balloon. The video shows a stretchable pump pushing liquid between two ventricles of a heart-shaped balloon (see final states in Fig. 1d). Each side of the pump is connected to one ventricle of the balloon, which is filled with Fluorinert FC-40 dielectric liquid. When a voltage of +6 kV is applied, the pump starts displacing liquid from the left ventricle of the balloon towards the right one. The microphone is on to show that the stretchable pump operates silently. 31 seconds after starting with equal volumes on both sides, the volume of the right-hand side ventricle is double that of the left-hand one. The pump is powered by a 20 g untethered power supply (including rechargeable battery, microcontroller, USB connector, and dc-dc converter, see Extended Data Fig. 4), showing the portability of this technology despite the high voltages used.

Video 3

Active wearable for thermal regulation using a stretchable pump embedded in a glove. We developed a wearable device illustrating active thermal regulation on the human body by integrating a stretchable pump and a flexible fluidic circuit in a textile glove. The scope of the device is to transport heat to a different part of the body (in this case, from forearm to hand) by circulating the liquid through a serpentine. The heat in our experiment is generated by a flexible-foil heater mounted on the forearm. This heater simulates the generation of heat by the human body (e.g., during intense physical activity). Thanks to its low mass (1g) and compliance, the pump can be sewn on the glove and does not interfere with the wrist movements. We used an infrared camera to map the temperature. The video shows that when the heater is on and the pump is off, the heater reaches an average steady state temperature of 45 °C. Once the pump is activated, it pushes cold liquid into the serpentine on the heater from one side (top side in the movie) and extracts hot liquid from the other side (bottom side in the movie). The hot liquid cools down when circulating through the cooling serpentine on the glove and is pumped back to the heater. As a consequence, the pump cools down the heater to an average temperature of 42 °C. Thanks to its low power consumption, the pump does not heat-up the fluid circulating through it.

Video 4

Self-contained fluidic muscles. This demonstration shows a fluidic muscle composed of a bending fluidic actuator with a stretchable pump integrated in its bottom layer. The inlet of the pump is connected to a fluidic reservoir on the back of the actuator, while its outlet is connected to the bellows-shaped active chamber. The actuator is filled with dielectric liquid before its activation and then the inlet tube is sealed. When a voltage is applied, the pump pushes the fluid from the reservoir to the bellows-shaped chamber, whose inflation causes bending of the actuator. Higher values of the voltage lead to higher bending angles. The values of the voltage required to activate the stretchable pump are higher in this configuration compared to the characterization experiments. The reason for this is that the pre-pressurization deforms slightly the pump, increasing the gap between each electrode pair. The experiment is conducted on a lubricated horizontal surface to minimize the effects of gravity and friction.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Cacucciolo, V., Shintake, J., Kuwajima, Y. et al. Stretchable pumps for soft machines. Nature 572, 516–519 (2019). https://doi.org/10.1038/s41586-019-1479-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41586-019-1479-6

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing