Letter | Published:

Continuous-wave lasing in an organic–inorganic lead halide perovskite semiconductor

Nature Photonicsvolume 11pages784788 (2017) | Download Citation


Hybrid organic–inorganic perovskites have emerged as promising gain media for tunable, solution-processed semiconductor lasers. However, continuous-wave operation has not been achieved so far1,2,3. Here, we demonstrate that optically pumped continuous-wave lasing can be sustained above threshold excitation intensities of ~17 kW cm–2 for over an hour in methylammonium lead iodide (MAPbI3) distributed feedback lasers that are maintained below the MAPbI3 tetragonal-to-orthorhombic phase transition temperature of T ≈ 160 K. In contrast with the lasing death phenomenon that occurs for pure tetragonal-phase MAPbI3 at T > 160 K (ref. 4), we find that continuous-wave gain becomes possible at T ≈ 100 K from tetragonal-phase inclusions that are photogenerated by the pump within the normally existing, larger-bandgap orthorhombic host matrix. In this mixed-phase system, the tetragonal inclusions function as carrier recombination sinks that reduce the transparency threshold, in loose analogy to inorganic semiconductor quantum wells, and may serve as a model for engineering improved perovskite gain media.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.


All prices are NET prices.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.


  1. 1.

    Sutherland, B. R. & Sargent, E. H. Perovskite photonic sources. Nat. Photon. 10, 295–302 (2016).

  2. 2.

    Veldhuis, S. A. et al. Perovskite materials for light‐emitting diodes and lasers. Adv. Mater. 28, 6804–6834 (2016).

  3. 3.

    Xing, G. et al. Low-temperature solution-processed wavelength-tunable perovskites for lasing. Nat. Mater. 13, 476–480 (2014).

  4. 4.

    Jia, Y. et al. Diode-pumped organo-lead halide perovskite lasing in a metal-clad distributed feedback resonator. Nano Lett. 16, 4624–4629 (2016).

  5. 5.

    Samuel, I. D. W. & Turnbull, G. A. Organic semiconductor lasers. Chem. Rev. 107, 1272–1295 (2007).

  6. 6.

    Chénais, S. & Forget, S. Recent advances in solid-state organic lasers. Polym. Int. 61, 390–406 (2012).

  7. 7.

    Giebink, N. C. & Forrest, S. R. Temporal response of optically pumped organic semiconductor lasers and its implication for reaching threshold under electrical excitation. Phys. Rev. B 79, 073302 (2009).

  8. 8.

    Zhang, Y. & Forrest, S. R. Existence of continuous-wave threshold for organic semiconductor lasers. Phys. Rev. B 84, 241301 (2011).

  9. 9.

    Sandanayaka, A. S. D. et al. Toward continuous-wave operation of organic semiconductor lasers. Sci. Adv. 3, e1602570 (2017).

  10. 10.

    Fan, F. et al. Continuous-wave lasing in colloidal quantum dot solids enabled by facet-selective epitaxy. Nature 544, 75–79 (2017).

  11. 11.

    Grim, J. Q. et al. Continuous-wave biexciton lasing at room temperature using solution-processed quantum wells. Nat. Nanotech. 9, 891–895 (2014).

  12. 12.

    Yang, Z., Pelton, M., Fedin, I., Talapin, D. V. & Waks, E. A room temperature continuous-wave nanolaser using colloidal quantum wells. Nat. Commun. 8, 143 (2017).

  13. 13.

    Blood, P. Quantum Confined Laser Devices: Optical Gain and Recombination in Semiconductors (Oxford Univ. Press, Oxford, 2015).

  14. 14.

    Kozlov, V. G. et al. Study of lasing action based on Forster energy transfer in optically pumped organic semiconductor thin films. J. Appl. Phys. 84, 4096–4108 (1998).

  15. 15.

    Xiao, Z. et al. Efficient perovskite light-emitting diodes featuring nanometre-sized crystallites. Nat. Photon. 11, 108–108 (2017).

  16. 16.

    Kogelnik, H. & Shank, C. V. Coupled-wave theory of distributed feedback lasers. J. Appl. Phys. 43, 2327–2335 (1972).

  17. 17.

    Andrew, P., Turnbull, G. A., Samuel, I. D. W. & Barnes, W. L. Photonic band structure and emission characteristics of a metal-backed polymeric distributed feedback laser. Appl. Phys. Lett. 81, 954–956 (2002).

  18. 18.

    Wehrenfennig, C., Liu, M., Snaith, H. J., Johnston, M. B. & Herz, L. M. Charge carrier recombination channels in the low-temperature phase of organic-inorganic lead halide perovskite thin films. APL Mater. 2, 081513 (2014).

  19. 19.

    Osherov, A. et al. The impact of phase retention on the structural and optoelectronic properties of metal halide perovskites. Adv. Mater. 28, 10757–10763 (2016).

  20. 20.

    Panzer, F. et al. Reversible laser-induced amplified spontaneous emission from coexisting tetragonal and orthorhombic phases in hybrid lead halide perovskites. Adv. Opt. Mater. 4, 917–928 (2016).

  21. 21.

    Kong, W. et al. Characterization of an abnormal photoluminescence behavior upon crystal-phase transition of perovskite CH3NH3PbI3. Phys. Chem. Chem. Phys. 17, 16405–16411 (2015).

  22. 22.

    Dobrovolsky, A., Merdasa, A., Unger, E. L., Yartsev, A. & Scheblykin, I. G. Defect-induced local variation of crystal phase transition temperature in metal-halide perovskites. Nat. Commun. 8, 34 (2017).

  23. 23.

    Neutzner, S., Kandada, A. R. S., Lanzani, G. & Petrozza, A. A dual-phase architecture for efficient amplified spontaneous emission in lead iodide perovskites. J. Mater. Chem. C 4, 4630–4633 (2016).

  24. 24.

    Onoda-Yamamuro, N., Matsuo, T. & Suga, H. Dielectric study of CH3NH3PbX3 (X = Cl, Br, I). J. Phys. Chem. Sol. 53, 935–939 (1992).

  25. 25.

    Chen, T. et al. Rotational dynamics of organic cations in the CH3NH3PbI3 perovskite. Phys. Chem. Chem. Phys. 17, 31278–31286 (2015).

  26. 26.

    Wang, T. et al. Indirect to direct bandgap transition in methylammonium lead halide perovskite. Energy Environ. Sci. 10, 509–515 (2017).

  27. 27.

    Marongiu, D. et al. Self-assembled lead halide perovskite nanocrystals in a perovskite matrix. ACS Energy Lett. 2, 769–775 (2017).

  28. 28.

    Byun, J. et al. Efficient visible quasi-2D perovskite light-emitting diodes. Adv. Mater. 28, 7515–7520 (2016).

  29. 29.

    Yuan, M. et al. Perovskite energy funnels for efficient light-emitting diodes. Nat. Nanotech. 11, 872–877 (2016).

Download references


This work was supported in part by the Air Force Office of Scientific Research Young Investigator Program under award no. FA-9550-14-1-0301 and by the National Science Foundation under grant no. DMR-1654077. R.A.K. and B.P.R. acknowledge support from a DARPA Young Faculty Award, #D15AP00093 and ONR Young Investigator Program (award #N00014-17-1-2005).

Author information


  1. Department of Electrical Engineering, The Pennsylvania State University, University Park, PA, USA

    • Yufei Jia
    • , Alex J. Grede
    •  & Noel C. Giebink
  2. Department of Electrical Engineering and Andlinger Center for Energy and the Environment, Princeton University, Princeton, NJ, USA

    • Ross A. Kerner
    •  & Barry P. Rand


  1. Search for Yufei Jia in:

  2. Search for Ross A. Kerner in:

  3. Search for Alex J. Grede in:

  4. Search for Barry P. Rand in:

  5. Search for Noel C. Giebink in:


Y.J. fabricated the gratings, carried out the laser measurements and performed the data analysis. R.A.K. developed the perovskite processing and deposition method and A.J.G. carried out the transient absorption measurements. B.P.R. and N.C.G. supervised the work. All authors contributed to writing the manuscript.

Competing interests

The authors declare no competing financial interests.

Corresponding author

Correspondence to Noel C. Giebink.

Electronic supplementary material

  1. Supplementary Information

    Supplementary figures 1-7

  2. Supplementary Video

    Video of continuous-wave lasing

About this article

Publication history




Issue Date



Further reading