Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Phase-heterojunction all-inorganic perovskite solar cells surpassing 21.5% efficiency

Nature Energy volume 8, pages 989–1001 (2023)Cite this article

Subjects

Abstract

Making organic–inorganic metal halide-based multijunction perovskite solar cells either by solution processes or physical techniques is not straightforward. Here we propose and developed dimethylammonium iodide-assisted β−CsPbI3 and guanidinium iodide-assisted γ−CsPbI3 all-inorganic phase-heterojunction solar cells (PHSs) by integrating hot-air and triple-source thermal evaporation deposition techniques, respectively. Incorporating a (Zn(C6F5)2) molecular additive and dopant-free hole transport layer produces a 21.59% power conversion efficiency (PCE). The laboratory-to-module scale shows 18.43% PCE with an 18.08 cm2 active area. We demonstrate that this additive-assisted β−γ-based PHS structure exhibited >200 hours of stable performance under maximum power tracking under one sun illumination. This work paves the way towards dual deposition techniques for PHS with important consequences not only for all inorganic but also for other halide perovskite compositions.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Fabrication of PHSs.
Fig. 2: β−CsPbI3 and γ−CsPbI3 interface analysis and thin film characterization.
Fig. 3: Structural, optoelectronic and photovoltaic properties.
Fig. 4: Reproducibility, dark current and photocurrent stability properties.
Fig. 5: Large-area fabrication and stability analysis.
Fig. 6: Photovoltaic performance of the β−CsPbI3-Zn(C6F5)2/γ−CsPbI3-GAI-based PSM.

Data availability

All data generated or analysed during this study are included in the published article and its Supplementary Information and Source Data files. Data used for Figs. 4a and 6e, Table 1 and Supplementary Figs. 24a, 25b and 28 are available at https://doi.org/10.6084/m9.figshare.23536833. Source data are provided with this paper.

References

  1. NREL Best Research-Cell Efficiencies Chart (NREL, accessed 7 June 2023); https://www.nrel.gov/pv/assets/pdfs/best-research-cell-efficiencies.pdf

  2. Park, J. et al. Controlled growth of perovskite layers with volatile alkylammonium chlorides. Nature 616, 724–730 (2023).

    Article  Google Scholar 

  3. Al-Ashouri, A. et al. Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction. Science 370, 1300–1309 (2020).

    Article  Google Scholar 

  4. Cui, P. et al. Planar p–n homojunction perovskite solar cells with efficiency exceeding 21.3%. Nat. Energy 4, 150–159 (2019).

    Article  Google Scholar 

  5. Xiong, S. et al. Direct observation on p- to n-type transformation of perovskite surface region during defect passivation driving high photovoltaic efficiency. Joule 5, 464–480 (2021).

    Article  Google Scholar 

  6. Noel, N. K. et al. Interfacial charge-transfer doping of metal halide perovskites for high performance photovoltaics. Energy Environ. Sci. 12, 3063–3073 (2019).

    Article  Google Scholar 

  7. Jiang, Q. et al. Interfacial molecular doping of metal halide perovskites for highly efficient solar cells. Adv. Mater. 32, 2001581 (2020).

    Article  Google Scholar 

  8. Cui, P. et al. Highly efficient electron-selective layer free perovskite solar cells by constructing effective p–n heterojunction. Sol. RRL 1, 1600027 (2017).

    Article  Google Scholar 

  9. Zhang, J. et al. n-type doping and energy states tuning in CH3NH3Pb1–xSb2x/3I3 perovskite solar cells. ACS Energy Lett. 1, 535–541 (2016).

    Article  Google Scholar 

  10. Shahbazi, S. et al. Ag doping of organometal lead halide perovskites: morphology modification and p-type character. J. Phys. Chem. C 121, 3673–3679 (2017).

    Article  Google Scholar 

  11. Kirchartz, T. & Cahen, D. Minimum doping densities for p–n junctions. Nat. Energy 5, 973–975 (2020).

    Article  Google Scholar 

  12. Eperon, G. E. et al. Inorganic caesium lead iodide perovskite solar cells. J. Mater. Chem. A 3, 19688–19695 (2015).

    Article  Google Scholar 

  13. Mali, S. S., Patil, J. V., Shinde, P. S., Miguel, G. & Hong, C. K. Fully air-processed dynamic hot-air-assisted M:CsPbI2Br (M: Eu2+, In3+) for stable inorganic perovskite solar cells. Matter 4, 635–653 (2021).

    Article  Google Scholar 

  14. Mali, S. S., Patil, J. V., Steele, J. A. & Hong, C. K. Ambient processed and stable all-inorganic lead halide perovskite solar cells with efficiencies nearing 20% using a spray coated Zn1−xCsxO electron transport layer. Nano Energy 90, 106597 (2021).

    Article  Google Scholar 

  15. Wang, K. et al. In-situ hot oxygen cleansing and passivation for all-inorganic perovskite solar cells deposited in ambient to breakthrough 19% efficiency. Adv. Funct. Mater. 31, 2101568 (2021).

    Article  Google Scholar 

  16. Mali, S. S. et al. Terbium-doped and dual-passivated γ-CsPb(I1−xBrx)3 inorganic perovskite solar cells with improved air thermal stability and high efficiency. Adv. Mater. 34, 2203204 (2022).

    Article  Google Scholar 

  17. Yoon, S. M. et al. Surface engineering of ambient-air-processed cesium lead triiodide layers for efficient solar cells. Joule 5, 183–196 (2021).

    Article  Google Scholar 

  18. Sun, X. et al. Highly efficient CsPbI3/Cs1−xDMAxPbI3 bulk heterojunction perovskite solar cell. Joule 6, 850–860 (2022).

    Article  Google Scholar 

  19. Bera, S. et al. Limiting heterovalent B-site doping in CsPbI3 nanocrystals: phase and optical stability. ACS Energy Lett. 4, 1364–1369 (2019).

    Article  Google Scholar 

  20. Zhou, S. et al. Ag-doped halide perovskite nanocrystals for tunable band structure and efficient charge transport. ACS Energy Lett. 4, 534–541 (2019).

    Article  Google Scholar 

  21. Han, Y. et al. Controlled n-doping in air-stable CsPbI2Br perovskite solar cells with a record efficiency of 16.79%. Adv. Funct. Mater. 30, 1909972 (2020).

    Article  Google Scholar 

  22. Sutton, R. J. et al. Cubic or orthorhombic? Revealing the crystal structure of metastable black-phase CsPbI3 by theory and experiment. ACS Energy Lett. 3, 1787–1794 (2018).

    Article  Google Scholar 

  23. Marronnier, A. et al. Anharmonicity and disorder in the black phases of cesium lead iodide used for stable inorganic perovskite solar cells. ACS Nano 12, 3477–3486 (2018).

    Article  Google Scholar 

  24. Jaysankar, M. et al. Minimizing voltage loss in wide-bandgap perovskites for tandem solar cells. ACS Energy Lett. 4, 259–264 (2019).

    Article  Google Scholar 

  25. Wang, Z. et al. Suppressed phase segregation for triple-junction perovskite solar cells. Nature 618, 74–79 (2023).

    Article  Google Scholar 

  26. Wang, Y. et al. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant? Angew. Chem. Int. Ed. 58, 16691–16696 (2019).

    Article  Google Scholar 

  27. Paterson, A. F. et al. Addition of the Lewis acid Zn(C6F5)2 enables organic transistors with a maximum hole mobility in excess of 20 cm2 V−1 s−1. Adv. Mater. 31, 1900871 (2019).

    Article  Google Scholar 

  28. Chang, X. et al. Printable CsPbI3 perovskite solar cells with PCE of 19% via an additive strategy. Adv. Mater. 32, 2001243 (2020).

    Article  Google Scholar 

  29. Ji, R. et al. Perovskite phase heterojunction solar cells. Nat. Energy 7, 1170–1179 (2022).

    Article  Google Scholar 

  30. Mali, S. S., Patil, J. V. & Hong, C. K. Hot-air-assisted fully air-processed barium incorporated CsPbI2Br perovskite thin films for highly efficient and stable all-inorganic perovskite solar cells. Nano Lett. 19, 6213–6220 (2019).

    Article  Google Scholar 

  31. Mali, S. S., Patil, J. V. & Hong, C. K. Simultaneous improved performance and thermal stability of planar metal ion incorporated CsPbI2Br all-inorganic perovskite solar cells based on MgZnO nanocrystalline electron transporting layer. Adv. Energy Mater. 10, 1902708 (2020).

    Article  Google Scholar 

  32. Mali, S. S., Patil, J. V., Arandiyan, H. & Hong, C. K. Reduced methylammonium triple-cation Rb0.05(FAPbI3)0.95(MAPbBr3)0.05 perovskite solar cells based on a TiO2/SnO2 bilayer electron transport layer approaching a stabilized 21% efficiency: the role of antisolvents. J. Mater. Chem. A 7, 17516–17528 (2019).

    Article  Google Scholar 

  33. Mali, S. S., Patil, J. V., Shinde, P. S. & Hong, C. K. Enhanced fill factor for normal n–i–p planar heterojunction and mesoscopic perovskite solar cells using ruthenium-doped TiO2 electron transporting layer. Prog. Photovolt. Res. Appl. 29, 159–171 (2021).

    Article  Google Scholar 

  34. Zhang, Z. et al. Efficient thermally evaporated γ-CsPbI3 perovskite solar cells. Adv. Energy Mater. 11, 2100299 (2021).

    Article  Google Scholar 

  35. Li, M.-H. et al. Electrical loss management by molecularly manipulating dopant-free poly(3-hexylthiophene) towards 16.93% CsPbI2Br solar cells. Angew. Chem. Int. Ed. 60, 16388–16393 (2021).

    Article  Google Scholar 

  36. Wang, Y. et al. Thermodynamically stabilized β-CsPbI3-based perovskite solar cells with efficiencies >18%. Science 365, 591–595 (2019).

    Article  Google Scholar 

  37. Mali, S. S. et al. Implementing dopant-free hole-transporting layers and metal-incorporated CsPbI2Br for stable all-inorganic perovskite solar cells. ACS Energy Lett. 6, 778–788 (2021).

    Article  Google Scholar 

  38. Sidhik, S. et al. Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells. Science 377, 1425–1430 (2022).

    Article  Google Scholar 

  39. Jin, Z., Wang, A., Zhou, Q., Wang, Y. & Wang, J. Detecting trap states in planar PbS colloidal quantum dot solar cells. Sci. Rep. 6, 37106 (2016).

    Article  Google Scholar 

  40. Mali, S. S., Patil, J. V., Park, D. W., Jung, Y. H. & Hong, C. K. Intrinsic and extrinsic stability of triple-cation perovskite solar cells through synergistic influence of organic additive. Cell Rep. Phys. Sci. 3, 100906 (2022).

    Article  Google Scholar 

  41. Zhao, X. et al. Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells. Science 377, 307–310 (2022).

    Article  Google Scholar 

  42. Yang, D. et al. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2. Nat. Commun. 9, 3239 (2018).

    Article  Google Scholar 

  43. Li, M.-H. et al. A sulfur-rich small molecule as a bifunctional interfacial layer for stable perovskite solar cells with efficiencies exceeding 22%. Nano Energy 79, 105462 (2021).

    Article  Google Scholar 

  44. Kresse, G. & Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 6, 15–50 (1996).

    Article  Google Scholar 

  45. Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).

    Article  Google Scholar 

  46. Blöchl, P. Projector augmented-wave method. Phys. Rev. B 50, 17953–17979 (1994).

    Article  Google Scholar 

  47. Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).

    Article  Google Scholar 

  48. Grimme, S., Antony, J., Ehrlich, S. & Krieg, H. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H–Pu. J. Chem. Phys. 132, 154104 (2010).

    Article  Google Scholar 

  49. Monkhorst, H. J. & Pack, J. D. Special points for Brillouin-zone integrations. Phys. Rev. B 13, 5188–5192 (1976).

    Article  MathSciNet  Google Scholar 

  50. Krukau, A. V., Vydrov, O. A., Izmaylov, A. F. & Scuseria, G. E. Influence of the exchange screening parameter on the performance of screened hybrid functionals. J. Chem. Phys. 125, 224106 (2006).

    Article  Google Scholar 

Download references

Acknowledgements

This research is supported by the National Research Foundation of Korea (NRF) (2020R1A2C2004880). This work was also supported by the Priority Research Centers Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (2018R1A6A1A03024334). S.R.R. acknowledges the support of the Department of Materials Engineering, Indian Institute of Science (IISc), Bengaluru, India. N.Y.D. acknowledges the support of the College of Earth and Minerals Sciences and the John and Willie Leone Family Department of Energy and Mineral Engineering of Pennsylvania State University. Computer simulations for this work were performed on the Roar Supercomputer of The Pennsylvania State University. Y.-W.Z. acknowledges the funding support of the Natural Science Foundation of Beijing Municipality (2191003). We thank G. G. Jeong for helping with GIXRD measurements, from the Chonnam Center for Research Facilities (CCRF), Chonnam National University, Gwangju, and we also thank J. A. Steele from the School of Mathematics and Physics from the University of Queensland for helping with XRD analysis.

Author information

Authors and Affiliations

  1. Polymer Energy Materials Laboratory, School of Chemical Engineering, Chonnam National University, Gwangju, South Korea

    Sawanta S. Mali, Jyoti V. Patil & Chang Kook Hong

  2. Optoelectronic Convergence Research Center, Chonnam National University, Gwangju, South Korea

    Jyoti V. Patil & Chang Kook Hong

  3. Beijing National Laboratory for Molecular Sciences, CAS Research/Education Center for Excellence in Molecular Sciences, Key Laboratory of Photochemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, China

    Jiang-Yang Shao & Yu-Wu Zhong

  4. Department of Materials Engineering, Indian Institute of Science (IISc), Bengaluru, India

    Sachin R. Rondiya

  5. Department of Energy and Mineral Engineering, Pennsylvania State University, University Park, PA, USA

    Nelson Y. Dzade

Authors
  1. Sawanta S. Mali
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Jyoti V. Patil
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jiang-Yang Shao
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Yu-Wu Zhong
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Sachin R. Rondiya
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Nelson Y. Dzade
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Chang Kook Hong
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

S.S.M. conceived the idea, initialized the project and fabricated devices and did almost all characterizations. C.K.H. directed and supervised the project and fund acquisition. S.S.M. and J.V.P. contributed fabrication to rear γ–CsPbI3 layer fabrication and stability experimental setup and monitored stability. S.R.R. carried out interface investigation and band alignment. N.Y.D. contributed to DFT formal analysis, investigation and methodology. J.-Y.S. and Y.-W.Z. synthesized SMe-TATPyr HTL. Top γ−CsPbI3 layers were optimized by J.V.P. and S.S.M. All authors contributed to discussions and to finalizing the paper.

Corresponding authors

Correspondence to Sawanta S. Mali or Chang Kook Hong.

Ethics declarations

Competing interests

The authors declare no competing interests.

Peer review

Peer review information

Nature Energy thanks Gary Hodes, Ana Flavia Nogueira and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Figs. 1–40, Notes 1–8, Tables 1–20 and Movies 1 and 2.

Reporting Summary

Supplementary Video 1

In-situ deposition of γ–CsPbI3-GAI-based perovskite thin film by thermal evaporation at module scale (13 cm × 13 cm = 169 cm2).

Supplementary Video 2

Captions for Supplementary Movie 2: testing of 13 × 13 cm2 PHS-based module under LED lamp in ambient conditions.

Supplementary Data

Source data file for Supplementary Fig. 24a.

Supplementary Data

Source data file for Supplementary Fig. 25b.

Supplementary Data

Source data file for Supplementary Fig. 28.

Source data

Source Data Fig. 4a

Statistical source data for Fig. 4a.

Source Data Fig. 6e

Statistical source data for Fig. 6e.

Source Data Table 1

Statistical source data for Table 1.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mali, S.S., Patil, J.V., Shao, JY. et al. Phase-heterojunction all-inorganic perovskite solar cells surpassing 21.5% efficiency. Nat Energy 8, 989–1001 (2023). https://doi.org/10.1038/s41560-023-01310-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41560-023-01310-y

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing