Abstract
Since the experimental characterization of the low-pressure region of water’s phase diagram in the early 1900s, scientists have been on a quest to understand the thermodynamic stability of ice polymorphs on the molecular level. In this study, we demonstrate that combining the MB-pol data-driven many-body potential for water, which was rigorously derived from “first principles” and exhibits chemical accuracy, with advanced enhanced-sampling algorithms, which correctly describe the quantum nature of molecular motion and thermodynamic equilibria, enables computer simulations of water’s phase diagram with an unprecedented level of realism. Besides providing fundamental insights into how enthalpic, entropic, and nuclear quantum effects shape the free-energy landscape of water, we demonstrate that recent progress in “first principles” data-driven simulations, which rigorously encode many-body molecular interactions, has opened the door to realistic computational studies of complex molecular systems, bridging the gap between experiments and simulations.
Similar content being viewed by others
Introduction
Arguably, water is the single most important molecule on Earth, being an essential component of life1 and being directly involved in several fundamental biological and chemical processes2. From a scientific standpoint, one of the most intriguing aspects of water is the contrast between its simple chemical formula and its complex behavior3. Liquid water exhibits several anomalous properties4, including the well-known density maximum at 4 °C which allows fish to thrive at the bottom of icy lakes. Ordinary ice, i.e., hexagonal ice (ice Ih), is an extraordinary solid5. It has a lower density than liquid water, which makes ice float on liquid water. Ice is slippery when one walks, skates, or just stands still on it, but is sticky when one touches it6. Strictly speaking, ordinary ice is not even a crystalline material since it exhibits orientational disorder7, which stabilizes the lattice structure and, consequently, raises the melting point by ~100 K compared to the melting points of other similar chemical compounds5. The origin of these unusual properties can be traced to the ability of the water molecules to form directional hydrogen bonds whose strength and orientation fluctuate in time and space depending on temperature and pressure8. As determined in the 1930s, the structure of ice follows the so-called Bernal-Fowler rules, which state that every water molecule is hydrogen bonded to four other water molecules9. While constraining the spatial arrangement of water molecules to tetrahedral geometries, a vast space of energetically favorable solids exists.
The phase diagram of water keeps expanding with time through a close synergy between experiment and simulation. Pioneering measurements by Angell and co-workers10,11 and subsequent computer simulations have led to several hypotheses about the existence of a liquid–liquid critical point at deeply supercooled temperatures12,13,14,15, which have stimulated several experimental measurements for the past two decades16,17,18,19,20. Similarly, while experiments continue to make progress in exploring the phase diagram of water21, with 20 different crystalline ice polymorphs22,23 and 3 amorphous forms24 discovered to date, computer simulations have generated a plethora of energetically viable ice polymorph candidates25. Despite significant advancements in computer simulations, reproducing the phase diagram of water experimentally determined by Bridgeman and Taman in the early 1900s26,27 still remains a challenge. Current state-of-the-art simulations can only qualitatively account for the equilibria between liquid water and the different ice polymorphs28,29,30,31,32,33,34,35,36. This is symptomatic of the difficulties for existing water models to correctly represent the free-energy landscape of water in regions of the phase diagram that most closely resemble conditions encountered for aqueous solutions on Earth37.
The accuracy of a computer simulation in predicting the properties of water across the entire phase diagram depends on the ability of the model used in the simulation to accurately capture the underlying molecular interactions, as well as on the extent to which the simulation exhaustively samples the free-energy landscape of water over a wide range of thermodynamic conditions. On the one hand, the free-energy landscape of water is particularly complex. For example, the average molecular dipole moment of water increases by 30–50% moving from the gas to the condensed phases38. Furthermore, water molecules can form highly directional hydrogen bonds whose strength is determined by many-body effects that vary significantly depending on the local three-dimensional structural arrangement39. In addition, due to the light mass of the hydrogen atoms, the properties of water are modulated by nuclear quantum effects, which are responsible for several differences in the behavior of light (H2O) and heavy (D2O) water40,41. On the other hand, since some ice polymorphs are separated energetically by only 0.06 kJ mol−142,43, computer simulations of water’s phase diagram require highly precise determination of the associated free-energy landscape.
By construction, “first principles” (or ab initio) simulations provide the most rigorous, although still approximate, description of a molecular system by solving the corresponding Schrödinger equation “on the fly”44. Different “first principles” methods, however, exhibit significantly different accuracy and predictive power depending on the approximations that they rely on, ranging from the Hartree–Fock method45,46,47, which scales with the fourth power of the number of basis functions (that is proportional to the system size) but neglects electron correlation, to coupled-cluster methods48,49, such as CCSD(T), i.e., a coupled-cluster method that includes single, double, and perturbative triple excitations, which currently represents the “gold standard” for molecular interactions but scales with the seventh power of the number of basis functions50,51,52. In practice, an accuracy-cost compromise has to be made in “first principles” simulations. In this context, density functional theory (DFT)53,54, which formally scales with the third power of the number of basis functions, remains the only viable “first principles” method for computer simulations of condensed-phase systems55. Besides being still computationally too expensive for a complete exploration of water’s phase diagram, DFT, however, suffers from inherent limitations due to the use of approximate exchange-correlation functionals and electron densities56,57,58,59,60,61,62,63,64, which manifest in both functional-driven and density-driven errors65,66,67,68,69. A recent study has shown that even the most accurate DFT models exhibit errors that are similar in magnitude to the relative differences in lattice energies of ice polymorphs70. These findings also imply that neural network potentials of water derived from DFT-based simulations35,71,72,73,74,75,76,77,78,79, which are gaining popularity in computational molecular sciences, exhibit the same limitations of the parent DFT models. Given the shortcomings associated with DFT-based simulations, it is thus not surprising that pairwise-additive water models such as TIP4P/200580 and TIP4P/Ice81, which were empirically parameterized to reproduce a subset of experimental thermodynamic data, still provide some of the most reasonable representations of the phase diagram of water28,29,30,31,32,33,82.
The development of efficient algorithms for correlated electronic structure methods has recently enabled routine coupled-cluster calculations of interaction energies for water clusters83,84. This has given rise to a new class of “first principles” data-driven potentials for water85,86,87,88,89,90,91,92 that rigorously decompose the interaction energy of an arbitrary water system into individual many-body contributions93, which can be efficiently calculated at the coupled-cluster level of theory. Among these “first principles” data-driven many-body potentials, MB-pol89,90,91 exploits the “nearsightedness of electronic matter”94 to accurately describe CCSD(T) interaction energies through a combination of machine-learned representations of short-range quantum-mechanical interactions and mean-field representations of many-body effects95,96. Fully derived from CCSD(T) data, MB-pol accurately predicts structural, thermodynamic, dynamical, and spectroscopic properties of water from gas-phase clusters97,98,99 to the liquid100,101,102,103,104,105 and ice106,107,108,109 phases, bypassing the accuracy limitations of DFT-based models. The MB-pol potential is thus uniquely positioned to provide realistic, molecular-level insights into the phase diagram of water.
For a precise determination of the phase diagram of water, equally important to the accurate representation of the underlying molecular interactions is the exhaustive sampling of the associated free-energy landscape30. The most common approach to characterizing coexistence equilibria is thermodynamic integration, which allows for calculating free-energy differences by performing a series of simulations that connect a phase of known free energy to the phase of interest110. In a seminal work28, Sanz et al. used thermodynamic integration in combination with the Einstein Molecule method and Gibbs-Duhem integration to calculate the phase diagram of water using different empirical, pairwise-additive models, providing an important benchmark for the ability of computer simulations to reproduce the experimental phase diagram. It should, however, be noted that calculating the phase diagram of water using the Einstein Molecule method is not devoid of challenges. In particular, for proton-disordered ice polymorphs, the Einstein Molecule method requires exact knowledge of the molecular configuration that minimizes the associated free energy as determined by the water model used in the simulations. This is a daunting task to accomplish for partially-disordered ice phases, such as ice III and ice V, because determining the corresponding minimum free-energy configuration requires extremely long simulations due to the extremely slow transition from one configuration to another111,112. Recent simulation studies carried out with the TIP4P/2005 and TIP4P/Ice force fields have shown that the Einstein Molecule method largely underestimates the thermodynamic stability of ice III compared to direct-coexistence and enhanced-coexistence simulations33,112,113. As discussed in the original references33,112,113, since both direct-coexistence and enhanced-coexistence simulations explicitly simulate the crystallization process, they do not rely on any approximation for the entropic contributions associated with proton disorder. This allows for correctly determining the free-energy difference between liquid water and a given ice polymorph, independently of the extent of proton disorder present in the ice polymorph (i.e., direct-coexistence and enhanced-coexistence simulations inherently sample the relevant regions of the underlying multidimensional free-energy landscape.)
In this study, we report the phase diagram of water calculated at the fully quantum-mechanical level using the “first principles” MB-pol data-driven many-body potential. Using a multi-stage approach that leverages the computational efficiency of a deep neural network potential trained on MB-pol data (DNN@MB-pol) and rigorous free-energy sampling techniques (see Methods for details), we demonstrate that MB-pol reproduces the phase diagram of water with an unprecedented level of realism, thus closing the gap between experimental measurements and simulation predictions.
Results
Liquid-ice coexistence
While it is, in principle, possible to determine each coexistence line from a single melting point of the relevant ice polymorph, we calculated a total of 15 melting points. This allowed us to average the coexistence lines obtained from all the melting points, resulting in more accurate estimates. Additionally, it allowed us to compare the melting lines calculated using Gibbs-Duhem integration to the melting points directly determined from enhanced-coexistence simulations using the DNN@MB-pol potential. Figure 1a shows that the melting points determined from the enhanced-coexistence simulations lie precisely on the estimated coexistence lines. It should be noted that, although the coexistence lines were traced using the DNN@MB-pol potential, the consistency between the melting lines computed using Gibbs-Duhem integration and the melting points determined from enhanced-coexistence simulations is equally good for the corresponding estimates obtained at both classical (Fig. 1b) and quantum (Fig. 1c) levels using the MB-pol potential upon applying thermodynamic perturbation theory and thermodynamic integration by mass, respectively. The comparisons shown in Fig. 1 thus demonstrate that directly tracing the melting lines using Gibbs-Duhem integration from single melting points calculated for each ice polymorph is indeed a reliable approximation.
Melting points calculated at the classical level with DNN@MB-pol (a) and MB-pol (b), and at the quantum level with MB-pol (c) are indicated by stars, while thermodynamically stable and metastable line segments are represented by solid and dotted lines, respectively.
Phase diagram
Starting from the triple points of the liquid-ice coexistence lines, we performed additional Gibbs-Duhem integration calculations to obtain the triple points reported in Supplementary Tables 2–7, and then determine the DNN@MB-pol and MB-pol phase diagrams shown in Fig. 2. The phase diagram calculated at the classical level with the DNN@MB-pol potential (Fig. 2a) correctly locates the regions of stability of ice Ih, ice II, and ice VI, but does not predict any region of stability for ice III and ice V. In contrast, the MB-pol phase diagram (Fig. 2b) obtained at the classical level from thermodynamic perturbation of the corresponding DNN@MB-pol phase diagram displays distinct regions of stability for all ice polymorphs, achieving semi-quantitative agreement with the experimental phase diagram (Fig. 2c). Accounting for nuclear quantum effects further expands the regions of stability associated with ice III and ice V, effectively bringing the MB-pol phase diagram calculated at the quantum level to a quantitative agreement with the experimental phase diagram. This trend is consistent with previous observations derived from simulations carried out with different water models32,35, which highlighted the importance of nuclear quantum effects for a correct representation of free-energy differences involving ice III and ice V.
The phase diagrams calculated at the classical level with DNN@MB-pol (a) and MB-pol (b), and at the quantum level with MB-pol (c) are compared with the experimental phase diagram (d). The experimental phase diagram is adapted from ref. 5. The regions of stability for ice Ih, II, III, V, and VI and liquid water are shown as areas colored in green, orange, gray, brown, pink, and blue, respectively.
The systematic improvement in the description of the phase boundaries observed when moving from classical DNN@MB-pol to classical MB-pol simulations, and then from classical MB-pol to quantum MB-pol simulations provides fundamental insights into the level of accuracy necessary for achieving a realistic representation of the phase behavior of water. In this regard, Fig. 3 reports the corrections applied to the chemical potential calculated with the DNN@MB-pol potential for each ice polymorph with respect to the liquid phase, which were necessary to elevate the DNN@MB-pol results to the actual MB-pol values (i.e., classical DNN@MB-pol → classical MB-pol, and classical MB-pol → quantum MB-pol). While DNN@MB-pol demonstrates remarkable consistency with MB-pol for energies and forces calculated for molecular configurations extracted from MB-pol simulations carried out over a wide range of thermodynamic conditions (see Supplementary Note 1), the DNN@MB-pol phase diagram calculated at the classical level (Fig. 2a) is qualitatively different from the corresponding MB-pol phase diagram (Fig. 2b). Figure 3 shows that the corrections associated with thermodynamic perturbation calculations that connect DNN@MB-pol to MB-pol (blue bars) overall favor the ice polymorphs over the liquid phase. This leads to a significant contraction of the region of stability for the liquid phase and, consequently, provides space for ice III and ice V, improving the agreement with the experimental phase diagram. The shifts in the stability of the different ice polymorphs are due to the high sensitivity of the free-energy landscape of water to the level of accuracy achieved in the description of the underlying molecular interactions, which emphasizes that the DNN@MB-pol potential, by construction, is not an exact clone of the MB-pol potential. In this regard, it has recently been shown that neural network potentials, such as DNN@MB-pol, are intrinsically limited in their transferability across different phases and thermodynamic conditions, being unable to correctly represent individual many-body contributions to the underlying energy landscape114, which is particularly important in determining the relative stability of different ice phases106,115.
Average corrections calculated from thermodynamic perturbation (i.e., classical DNN@MB-pol → classical MB-pol) and thermodynamic integration by mass (i.e., classical MB-pol → quantum MB-pol), and corresponding net corrections applied to the differences in chemical potentials between the liquid phase and each ice polymorph. Each error bar is defined as the variance of the correction over the thermodynamic conditions used in the calculations.
Our results are in line with previous observations of proton-ordered ice II being destabilized relative to the other proton-disordered ice phases when long-range interactions are properly accounted for35. Based on the results obtained with the MB-pol potential, we hypothesize that the phase diagram of water reported in ref. 36, which predicts ice III to be thermodynamically unstable, may benefit from thermodynamic perturbation calculations connecting the neural network potential to the actual reference DFT model. It should, however, be noted that the original phase diagram of ref. 36, which was calculated using the Einstein Molecule method, may also change significantly when the free-energy differences are calculated using direct-coexistence or enhanced-coexistence simulations as discussed in Supplementary Note 5.
As shown in Fig. 2, accounting for nuclear quantum effects leads to a quantitative agreement between the MB-pol and experimental phase diagrams. Figure 3 indicates that the corrections to the differences in chemical potential calculated at the quantum-mechanical level are positive for the liquid-ice Ih and liquid-ice II equilibria, negligible for the liquid-ice III equilibrium, and negative for the liquid-ice V and liquid-ice VI equilibria, in line with previous observations based on simulations carried out with the pairwise-additive TIP4PQ/200532 model and the revPBE0-D3 DFT model35. The different magnitude of the quantum corrections likely depends on the delicate interplay between competing nuclear quantum effects116 and different hydrogen-bonding topologies of different ice phases117, which are further modulated by temperature and pressure. The investigation of the different impact that nuclear quantum effects have on the difference in chemical potential between liquid water and different ice polymorphs will be the focus of a future study. Interestingly, the largest shifts between the coexistence lines calculated at the classical and quantum levels with MB-pol are on the order of ~5 K, which are significantly smaller than the shift of ~20 K obtained from simulations with the TIP4PQ/2005 model. These differences can possibly be attributed to the competition between inter- and intra-molecular nuclear quantum effects116, which is correctly represented by realistic water models such as MB-pol102 but exaggerated by empirical pairwise additive models such as TIP4PQ/2005118.
Comparison with current state-of-the-art simulations
Figure 4 compares the MB-pol phase diagram calculated at the quantum-mechanical level with current state-of-the-art phase diagrams reported in the literature for various water models. Empirical pairwse-additive water models belonging to the TIP4P family (such as TIP4P/200533 and TIP4P/Ice113 shown in Fig. 4a and b, respectively) and the polarizable iAMOEBA model34 (Fig. 4c) are able to qualitatively capture some features of the experimental phase diagram. However, none of the regions of stability for the different ice polymorphs is correctly represented, except that for ice Ih. In particular, both TIP4P/2005 and TIP4P/Ice largely overestimate the region of stability of ice III, which consequently leads to the shrinking of the region of stability for ice VI and pushes the region of stability for ice II down to temperatures below 100–150 K33,113. Similar performance is exhibited by iAMOEBA that places the region of stability for ice II and ice VI at significantly lower temperatures (below 200 K) and higher pressures (above 1.2 GPa), respectively, compared to the experimental phase diagram.
a Classical phase diagram of TIP4P/2005 from ref. 33 calculated using direct-coexistence simulations. b Classical phase diagram of TIP4P/Ice from ref. 113 calculated using enhanced-coexistence simulations. c Classical phase diagram of iAMOEBA from ref. 34 calculated using direct-coexistence simulations. d Classical phase diagram of DNN@SCAN from ref. 36 calculated using the Einstein Molecule method. e Quantum phase diagram of revPBE0-D3 from ref. 35 calculated using the Debye Crystal method. f Quantum phase diagram of MB-pol calculated in this study using enhanced-coexistence simulations. The phase diagrams that are shown in a, c, d, and e were digitized from the original references. In each panel, the regions of stability for ice Ih, II, III, V, and VI and liquid water are shown as areas colored in green, orange, gray, brown, pink, and blue, respectively, and the experimental phase diagram5 is shown using dotted red lines.
Both DFT-based phase diagrams calculated at the classical level with the DNN@SCAN potential (Fig. 4d) and at the quantum level with the revPBE0-D3 model (Fig. 4e) predict ice Ih, ice II, ice V, and ice VI to be stable. However, the predicted regions of stability are significantly different from those observed experimentally, with the revPBE0-D3 model predicting ice VI to be only stable above 1 GPa and below 250 K. In addition, both DNN@SCAN and revPBE0-D3 do not predict ice III to be a stable phase, which is in clear disagreement with the experimental observations. As discussed in Supplementary Note 5, the absence of a region of stability for ice III in the DNN@SCAN and revPBE0-D3 phase diagrams is likely an artifact of the Einstein Molecule method28 and the closely related Debye Crystal method119, respectively. While calculating the DNN@SCAN and revPBE0-D3 phase diagrams using direct-coexistence or enhanced-coexistence simulations will likely result in the appearance of a region of stability for ice III, this will also be accompanied by the shrinking of the region of stability for ice II, which is already underestimated by both water models. In addition, since the region of stability for ice VI is independent of the method used to calculate the phase diagram (Supplementary Fig. 30), the revPBE0-D3 phase diagram calculated using direct-coexistence or enhanced-coexistence simulations will likely still not be able to predict the correct region of stability for ice VI. Figure 4 clearly demonstrates that MB-pol outperforms all models that have, to date, been used to simulate the low-pressure region of the phase diagram of water. Combined with previous findings97,98,99,100,101,102,103,104,105,106,107,108,109, the comparisons shown in Fig. 4 provide further support to the notion that MB-pol currently provides the most realistic representation of water across different phases and thermodynamic conditions.
Thermodynamic transferability
While demonstrating remarkable accuracy in predicting the properties of water across the entire phase diagram, MB-pol is still a computer model and, therefore, by definition, does not exactly correspond to “real” water. For example, due to a nearly constant shift of ~10 K in the liquid–ice Ih coexistence line, MB-pol slightly underestimates the melting points of the ice polymorphs. As a result, the melting points predicted by TIP4P/Ice and revPBE0-D3 for ice Ih at 1 atm appear to be in closer agreement with the experimental value (Table 1). Among all water models, MB-pol, however, clearly displays better transferability across different phases and is the only model that correctly reproduce the overall shape of the experimental phase diagram. Importantly, the deviations between the MB-pol and experimental coexistence lines are always on the order of ~10 K (~0.02 kcal/mol), demonstrating that MB-pol consistently predicts the properties of “real” water across different phases and thermodynamic condition with an accuracy that is well within chemical accuracy (1 kcal/mol)120.
Accounting for nuclear quantum effects lowers the melting point predicted by MB-pol for ice Ih at 1 atm by 3.9 K. While, on the absolute temperature scale, this shift results in slightly worse agreement with the experimental value, the relative difference between the classical and quantum melting points of ice Ih at 1 atm predicted by MB-pol is in remarkable agreement with the difference of 3.8 K between the melting points of D2O and H2O ice Ih measured experimentally at 1 atm. This agreement is consistent with the notion that classical simulations more closely describe the behavior of heavy water40. Moreover, the MB-pol classical and quantum heats of fusion determined at 1 atm from the corresponding chemical potentials (Table 1) are within 3% of the experimental values measured for H2O and D2O ice Ih, respectively. To put the MB-pol results in context, DNN@SCAN overestimates the heats of fusion of H2O and D2O ice Ih by 27% and 22%, respectively121, revPBE0-D3 overestimates the heats of fusion of H2O and D2O ice Ih by 13% and 18%, respectively75, and TIP4P/Ice underestimates the heats of fusion of H2O and D2O ice Ih by 10% and 15%, respectively122.
Discussion
We have demonstrated that the “first pinciples” MB-pol data-driven many-body potential, which was rigorously derived from the many-body expansion of the energy calculated at the “gold standard” coupled-cluster level of theory, predicts the low-pressure region of the phase diagram of water in quantitative agreement with experiment, exhibiting an unprecedented level of realism for molecular-level computer simulations. Besides marking an important milestone in computer simulations of water, both accuracy and transferability demonstrated by MB-pol across a wide range of thermodynamic conditions provide support for the reliability and validity of MB-pol simulations of water under conditions that are difficult to access by experiments19,123. In this context, the close resemblance of MB-pol to the long-sought-after “universal model” of water, as defined in ref. 124, provides a more realistic basis for “in silico” studies of supercooled water and ice nucleation, which have long puzzled the scientific community due to inconsistent or inconclusive results from existing water models. For example, computer simulations with various water models have yielded a wide range of predictions for a possible liquid-liquid critical point125 and rates of homogeneous ice nucleation122. Importantly, since the data-driven many-body formalism originally adopted in the development of the MB-pol potential has recently been extended to generic molecules126,127,128,129,130, our results also indicate that it will soon be possible to perform realistic molecular simulations of complex systems, thus bridging the gap between computer modeling and experiments.
Methods
The phase diagram of water was calculated with MB-pol using a multi-stage approach as described in detail in the Supplementary Information. Briefly, we first developed a deep neural network potential (DNN@MB-pol) trained on MB-pol data which enables MB-pol-level molecular dynamics simulations at a fraction of the computational cost associated with actual MB-pol simulations. This speedup was critical to enabling extensive enhanced-coexistence simulations of the relevant liquid-ice polymorph equilibria, which would have been otherwise unaffordable with MB-pol. Second, we calculated the DNN@MB-pol melting points for the relevant ice polymorphs using enhanced-coexistence simulations which, as discussed in the Introduction, are not affected by possible artifacts arising from approximate definitions of proton disorder33,112,113. Third, starting from the DNN@MB-pol melting points, we determined the corresponding MB-pol melting points using thermodynamic perturbation theory (Supplementary Note 2). Fourth, we used thermodynamic integration by mass to account for nuclear quantum effects in the liquid-ice polymorph equilibria and thus calculate the MB-pol quantum melting points for the different ice polymorphs. Finally, we used Gibbs–Duhem integration to trace the coexistence lines connecting all melting points and determine the phase diagrams of water (Fig. 2) at the classical level with DNN@MB-pol and MB-pol, and at the quantum level with MB-pol.
Data availability
Example files used for the enhanced-coexistence simulations are available at PLUMED-NEST (https://www.plumed-nest.org), as plumID:23.001. Input and data files for all simulations, as well as the DNN@MB-pol potential along with the corresponding training set, are available on Zenodo131. Any other data generated and analyzed for this study are available from the authors upon request.
Code availability
All analysis files are available at the Paesani Lab data Repository: https://github.com/paesanilab/Data_Repository. MB-pol reference energies and forces were computed using the MBX software132, which is available at: https://github.com/paesanilab/MBX. The DNN@MB-pol potential was trained using DeePMD-kit133, which is available at: https://github.com/deepmodeling/deepmd-kit. All classical molecular dynamics (MD) simulations were carried out with LAMMPS134 patched with PLUMED135 and DeePMD-kit133. All path-integral molecular dynamics (PIMD) simulations were carried out with i-PI136, which is available at: https://github.com/i-pi/i-pi. Any additional codes not listed here are available from the authors upon request.
References
Franks, F. Water: a matrix of life, vol. 21 (Royal Society of Chemistry, 2000).
Bagchi, B. Water in biological and chemical processes: from structure and dynamics to function (Cambridge University Press, 2013).
Eisenberg, D. & Kauzmann, W. The structure and properties of water (OUP Oxford, 2005).
Pettersson, L. G. M., Henchman, R. H. & Nilsson, A. Water – the most anomalous liquid. Chem. Rev. 116, 7459–7462 (2016).
Petrenko, V. F. & Whitworth, R. W. Physics of ice (OUP Oxford, 1999).
Rosenberg, R. Why is ice slippery? Phys. Today 58, 50 (2005).
Pauling, L. The structure and entropy of ice and of other crystals with some randomness of atomic arrangement. J. Am. Chem. Soc. 57, 2680–2684 (1935).
Maréchal, Y. The hydrogen bond and the water molecule: the physics and chemistry of water, aqueous and bio-media (Elsevier, 2006).
Bernal, J. D. & Fowler, R. H. A theory of water and ionic solution, with particular reference to hydrogen and hydroxyl ions. J. Chem. Phys. 1, 515–548 (1933).
Speedy, R. & Angell, C. Isothermal compressibility of supercooled water and evidence for a thermodynamic singularity at -45 oC. J. Chem. Phys. 65, 851–858 (1976).
Angell, C., Sichina, W. & Oguni, M. Heat capacity of water at extremes of supercooling and superheating. J. Phys. Chem. 86, 998–1002 (1982).
Speedy, R. J. Stability-limit conjecture. An interpretation of the properties of water. J. Phys. Chem. 86, 982–991 (1982).
Poole, P. H., Sciortino, F., Essmann, U. & Stanley, H. E. Phase behaviour of metastable water. Nature 360, 324–328 (1992).
Poole, P. H., Sciortino, F., Grande, T., Stanley, H. E. & Angell, C. A. Effect of hydrogen bonds on the thermodynamic behavior of liquid water. Phys. Rev. Lett. 73, 1632 (1994).
Sastry, S., Debenedetti, P. G., Sciortino, F. & Stanley, H. E. Singularity-free interpretation of the thermodynamics of supercooled water. Phys. Rev. E 53, 6144 (1996).
Pallares, G. et al. Anomalies in bulk supercooled water at negative pressure. Proc. Natl Acad. Sci. USA 111, 7936–7941 (2014).
Caupin, F. Escaping the no man’s land: Recent experiments on metastable liquid water. J. Non Cryst. Solids 407, 441–448 (2015).
Kim, K. H. et al. Maxima in the thermodynamic response and correlation functions of deeply supercooled water. Science 358, 1589–1593 (2017).
Kim, K. H. et al. Experimental observation of the liquid-liquid transition in bulk supercooled water under pressure. Science 370, 978–982 (2020).
Pathak, H. et al. Enhancement and maximum in the isobaric specific-heat capacity measurements of deeply supercooled water using ultrafast calorimetry. Proc. Natl Acad. Sci. USA 118, e2018379118 (2021).
Salzmann, C. G. Advances in the experimental exploration of water’s phase diagram. J. Chem. Phys. 150, 060901 (2019).
Millot, M. et al. Nanosecond X-ray diffraction of shock-compressed superionic water ice. Nature 569, 251–255 (2019).
Gasser, T. M., Thoeny, A. V., Fortes, A. D. & Loerting, T. Structural characterization of ice XIX as the second polymorph related to ice VI. Nat. Commun. 12, 1–10 (2021).
Rosu-Finsen, A. et al. Medium-density amorphous ice. Science 379, 474–478 (2023).
Zhu, C. et al. Computational prediction of novel ice phases: a perspective. J. Phys. Chem. Lett. 11, 7449–7461 (2020).
Tammann, G. Ueber die Grenzen des festen Zustandes IV. Ann. Phys. 307, 1–31 (1900).
Bridgman, P. W. Water, in the liquid and five solid forms, under pressure. Proc. Am. Acad. Arts Sci. 47, 441–558 (1912).
Sanz, E., Vega, C., Abascal, J. L. F. & MacDowell, L. G. Phase diagram of water from computer simulation. Phys. Rev. Lett. 92, 255701 (2004).
Vega, C., Abascal, J., Sanz, E., MacDowell, L. & McBride, C. Can simple models describe the phase diagram of water? J. Phys. Condens. Matter. 17, S3283 (2005).
Vega, C., Sanz, E., Abascal, J. & Noya, E. Determination of phase diagrams via computer simulation: methodology and applications to water, electrolytes and proteins. J. Phys. Condens. Matter. 20, 153101 (2008).
Vega, C., Abascal, J. L., Conde, M. & Aragones, J. What ice can teach us about water interactions: a critical comparison of the performance of different water models. Faraday Discuss. 141, 251–276 (2009).
McBride, C., Noya, E. G., Aragones, J. L., Conde, M. M. & Vega, C. The phase diagram of water from quantum simulations. Phys. Chem. Chem. Phys. 14, 10140–10146 (2012).
Conde, M. M., Gonzalez, M., Abascal, J. & Vega, C. Determining the phase diagram of water from direct coexistence simulations: the phase diagram of the TIP4P/2005 model revisited. J. Chem. Phys. 139, 154505 (2013).
Wang, L.-P. et al. Systematic improvement of a classical molecular model of water. J. Phys. Chem. B 117, 9956–9972 (2013).
Reinhardt, A. & Cheng, B. Quantum-mechanical exploration of the phase diagram of water. Nat. Commun. 12, 588 (2021).
Zhang, L., Wang, H., Car, R. & Weinan, E. Phase diagram of a deep potential water model. Phys. Rev. Lett. 126, 236001 (2021).
Michard, G. Natural aqueous solutions in the earth. In The physics and chemistry of aqueous ionic solutions, 379–397 (Springer, 1987).
Coulson, C. A. & Eisenberg, D. Interactions of H2O molecules in ice I. The dipole moment of an H2O molecule in ice. Proc. R. Soc. Lond. 291, 445–453 (1966).
Xantheas, S. S. Ab initio studies of cyclic water clusters (H2O)n, n = 1–6. II. Analysis of many-body interactions. J. Chem. Phys. 100, 7523–7534 (1994).
Paesani, F. & Voth, G. A. The properties of water: Insights from quantum simulations. J. Phys. Chem. B 113, 5702–5719 (2009).
Ceriotti, M. et al. Nuclear quantum effects in water and aqueous systems: experiment, theory, and current challenges. Chem. Rev. 116, 7529–7550 (2016).
Whalley, E. Energies of the phases of ice at zero temperature and pressure. J. Chem. Phys. 81, 4087–4092 (1984).
Gillan, M. J., Alfe, D. & Michaelides, A. Perspective: how good is DFT for water? J. Chem. Phys. 144, 130901 (2016).
Car, R. & Parrinello, M. Unified approach for molecular dynamics and density-functional theory. Phys. Rev. Lett. 55, 2471 (1985).
Hartree, D. R. The wave mechanics of an atom with a non-Coulomb central field. Part I. Theory and methods. Proc. Camb. Philos. Soc. 24, 89–110 (1928).
Fock, V. Näherungsmethode zur lösung des quantenmechanischen mehrkörperproblems. Z. Phys. 61, 126–148 (1930).
Slater, J. C. Note on hartree’s method. Phys. Rev. 35, 210 (1930).
Coester, F. Bound states of a many-particle system. Nucl. Phys. 7, 421–424 (1958).
Coester, F. & Kümmel, H. Short-range correlations in nuclear wave functions. Nucl. Phys. 17, 477–485 (1960).
Bartlett, R. J. & Musiał, M. Coupled-cluster theory in quantum chemistry. Rev. Mod. Phys. 79, 291 (2007).
Rezac, J. & Hobza, P. Describing noncovalent interactions beyond the common approximations: how accurate is the “gold standard,” CCSD (T) at the complete basis set limit? J. Chem. Theory Comput. 9, 2151–2155 (2013).
Rezac, J. & Hobza, P. Benchmark calculations of interaction energies in noncovalent complexes and their applications. Chem. Rev. 116, 5038–5071 (2016).
Hohenberg, P. & Kohn, W. Inhomogeneous electron gas. Phys. Rev. 136, B864 (1964).
Kohn, W. & Sham, L. J. Self-consistent equations including exchange and correlation effects. Phys. Rev. 140, A1133 (1965).
Marx, D. & Hutter, J. Ab initio molecular dynamics: basic theory and advanced methods (Cambridge University Press, 2009).
Parr, R. G. Density functional theory. Annu. Rev. Phys. Chem. 34, 631–656 (1983).
Kohn, W., Becke, A. D. & Parr, R. G. Density functional theory of electronic structure. J. Phys. Chem. 100, 12974–12980 (1996).
Cohen, A. J., Mori-Sánchez, P. & Yang, W. Insights into current limitations of density functional theory. Science 321, 792–794 (2008).
Perdew, J. P., Ruzsinszky, A., Constantin, L. A., Sun, J. & Csonka, G. I. Some fundamental issues in ground-state density functional theory: a guide for the perplexed. J. Chem. Theory Comput. 5, 902–908 (2009).
Cohen, A. J., Mori-Sánchez, P. & Yang, W. Challenges for density functional theory. Chem. Rev. 112, 289–320 (2012).
Burke, K. Perspective on density functional theory. J. Chem. Phys. 136, 150901 (2012).
Medvedev, M. G., Bushmarinov, I. S., Sun, J., Perdew, J. P. & Lyssenko, K. A. Density functional theory is straying from the path toward the exact functional. Science 355, 49–52 (2017).
Mardirossian, N. & Head-Gordon, M. Thirty years of density functional theory in computational chemistry: an overview and extensive assessment of 200 density functionals. Mol. Phys. 115, 2315–2372 (2017).
Verma, P. & Truhlar, D. G. Status and challenges of density functional theory. Trends Chem. 2, 302–318 (2020).
Mori-Sánchez, P., Cohen, A. J. & Yang, W. Localization and delocalization errors in density functional theory and implications for band-gap prediction. Phys. Rev. Lett. 100, 146401 (2008).
Kim, M.-C., Sim, E. & Burke, K. Understanding and reducing errors in density functional calculations. Phys. Rev. Lett. 111, 073003 (2013).
Dasgupta, S., Lambros, E., Perdew, J. P. & Paesani, F. Elevating density functional theory to chemical accuracy for water simulations through a density-corrected many-body formalism. Nat. Commun. 12, 1–12 (2021).
Sim, E., Song, S., Vuckovic, S. & Burke, K. Improving results by improving densities: density-corrected density functional theory. J. Am. Chem. Soc. 144, 6625–6639 (2022).
Palos, E. et al. Assessing the interplay between functional-driven and density-driven errors in DFT models of water. J. Chem. Theory Comput. 18, 3410–3426 (2022).
Della Pia, F., Zen, A., Alfè, D. & Michaelides, A. DMC-ICE13: Ambient and high pressure polymorphs of ice from diffusion Monte Carlo and density functional theory. J. Chem. Phys. 157, 134701 (2022).
Morawietz, T., Sharma, V. & Behler, J. A neural network potential-energy surface for the water dimer based on environment-dependent atomic energies and charges. J. Chem. Phys. 136, 064103 (2012).
Morawietz, T. & Behler, J. A density-functional theory-based neural network potential for water clusters including van der Waals corrections. J. Phys. Chem. A 117, 7356–7366 (2013).
Morawietz, T., Singraber, A., Dellago, C. & Behler, J. How van der Waals interactions determine the unique properties of water. Proc. Natl Acad. Sci. USA 113, 8368–8373 (2016).
Morawietz, T. et al. The interplay of structure and dynamics in the Raman spectrum of liquid water over the full frequency and temperature range. J. Phys. Chem. Lett. 9, 851–857 (2018).
Cheng, B., Engel, E. A., Behler, J., Dellago, C. & Ceriotti, M. Ab initio thermodynamics of liquid and solid water. Proc. Natl Acad. Sci. USA 116, 1110–1115 (2019).
Gartner III, T. E. et al. Signatures of a liquid–liquid transition in an ab initio deep neural network model for water. Proc. Natl Acad. Sci. USA 117, 26040–26046 (2020).
Wohlfahrt, O., Dellago, C. & Sega, M. Ab initio structure and thermodynamics of the RPBE-D3 water/vapor interface by neural-network molecular dynamics. J. Chem. Phys. 153, 144710 (2020).
Zhang, C. et al. Modeling liquid water by climbing up Jacob’s ladder in density functional theory facilitated by using deep neural network potentials. J. Phys. Chem. B 125, 11444–11456 (2021).
Gartner III, T. E., Piaggi, P. M., Car, R., Panagiotopoulos, A. Z. & Debenedetti, P. G. Liquid-liquid transition in water from first principles. Phys. Rev. Lett. 129, 255702 (2022).
Abascal, J. L. F. & Vega, C. A general purpose model for the condensed phases of water: TIP4P/2005. J. Chem. Phys. 123, 234505 (2005).
Abascal, J. L. F., Sanz, E., García Fernández, R. & Vega, C. A potential model for the study of ices and amorphous water: TIP4P/Ice. J. Chem. Phys. 122, 234511 (2005).
McBride, C., Vega, C., Noya, E. G., Ramírez, R. & Sesé, L. M. Quantum contributions in the ice phases: the path to a new empirical model for water – TIP4PQ/2005. J. Chem. Phys. 131, 024506 (2009).
Adler, T., Knizia, G. & Werner, H. A simple and efficient CCSD(T)-F12 approximation. J. Chem. Phys. 127, 221106–221106 (2007).
Knizia, G., Adler, T. B. & Werner, H.-J. Simplified CCSD(T)-F12 methods: theory and benchmarks. J. Chem. Phys. 130, 054104 (2009).
Bukowski, R., Szalewicz, K., Groenenboom, G. C. & Van der Avoird, A. Predictions of the properties of water from first principles. Science 315, 1249–1252 (2007).
Wang, Y., Huang, X., Shepler, B. C., Braams, B. J. & Bowman, J. M. Flexible, ab initio potential, and dipole moment surfaces for water. I. Tests and applications for clusters up to the 22-mer. J. Chem. Phys. 134, 094509 (2011).
Wang, Y. & Bowman, J. M. Ab initio potential and dipole moment surfaces for water. II. Local-monomer calculations of the infrared spectra of water clusters. J. Chem. Phys. 134, 154510 (2011).
Babin, V., Medders, G. R. & Paesani, F. Toward a universal water model: first principles simulations from the dimer to the liquid phase. J. Phys. Chem. Lett. 3, 3765–3769 (2012).
Babin, V., Leforestier, C. & Paesani, F. Development of a “first principles” water potential with flexible monomers: dimer potential energy surface, VRT spectrum, and second virial coefficient. J. Chem. Theory Comput. 9, 5395–5403 (2013).
Babin, V., Medders, G. R. & Paesani, F. Development of a “first principles” water potential with flexible monomers. II: Trimer potential energy surface, third virial coefficient, and small clusters. J. Chem. Phys. 10, 1599–1607 (2014).
Medders, G. R., Babin, V. & Paesani, F. Development of a “first-principles” water potential with flexible monomers. III. Liquid phase properties. J. Chem. Theory Comput. 10, 2906–2910 (2014).
Yu, Q. et al. q-AQUA: a many-body CCSD(T) water potential including four-body interactions demonstrates the quantum nature of water from clusters to the liquid phase. J. Phys. Chem. Lett. 13, 5068–5074 (2022).
Hankins, D., Moskowitz, J. & Stillinger, F. Water molecule interactions. J. Chem. Phys. 53, 4544–4554 (1970).
Prodan, E. & Kohn, W. Nearsightedness of electronic matter. Proc. Natl Acad. Sci. USA 102, 11635–11638 (2005).
Reddy, S. K. et al. On the accuracy of the MB-pol many-body potential for water: Interaction energies, vibrational frequencies, and classical thermodynamic and dynamical properties from clusters to liquid water and ice. J. Chem. Phys. 145, 194504 (2016).
Paesani, F. Getting the right answers for the right reasons: toward predictive molecular simulations of water with many-body potential energy functions. Acc. Chem. Res. 49, 1844–1851 (2016).
Richardson, J. O. et al. Concerted hydrogen-bond breaking by quantum tunneling in the water hexamer prism. Science 351, 1310–1313 (2016).
Cole, W. T., Farrell, J. D., Wales, D. J. & Saykally, R. J. Structure and torsional dynamics of the water octamer from THz laser spectroscopy near 215 μm. Science 352, 1194–1197 (2016).
Brown, S. E. et al. Monitoring water clusters “melt” through vibrational spectroscopy. J. Am. Chem. Soc. 139, 7082–7088 (2017).
Medders, G. R. & Paesani, F. Infrared and Raman spectroscopy of liquid water through “first-principles” many-body molecular dynamics. J. Chem. Theory Comput. 11, 1145–1154 (2015).
Medders, G. R. & Paesani, F. Dissecting the molecular structure of the air/water interface from quantum simulations of the sum-frequency generation spectrum. J. Am. Chem. Soc. 138, 3912–3919 (2016).
Reddy, S. K., Moberg, D. R., Straight, S. C. & Paesani, F. Temperature-dependent vibrational spectra and structure of liquid water from classical and quantum simulations with the mb-pol potential energy function. J. Chem. Phys. 147, 244504 (2017).
Moberg, D. R., Straight, S. C. & Paesani, F. Temperature dependence of the air/water interface revealed by polarization sensitive sum-frequency generation spectroscopy. J. Phys. Chem. B 122, 4356–4365 (2018).
Muniz, M. C. et al. Vapor–liquid equilibrium of water with the MB-pol many-body potential. J. Chem. Phys. 154, 211103 (2021).
Gartner III, T. E. et al. Anomalies and local structure of liquid water from boiling to the supercooled regime as predicted by the many-body MB-pol model. J. Phys. Chem. 13, 3652–3658 (2022).
Pham, C. H., Reddy, S. K., Chen, K., Knight, C. & Paesani, F. Many-body interactions in ice. J. Chem. Theory Comput. 13, 1778–1784 (2017).
Moberg, D. R., Straight, S. C., Knight, C. & Paesani, F. Molecular origin of the vibrational structure of ice Ih. J. Phys. Chem. Lett. 8, 2579–2583 (2017).
Moberg, D. R., Sharp, P. J. & Paesani, F. Molecular-level interpretation of vibrational spectra of ordered ice phases. J. Phys. Chem. B 122, 10572–10581 (2018).
Moberg, D. R. et al. The end of ice I. Proc. Natl Acad. Sci. USA 116, 24413–24419 (2019).
Frenkel, D. & Ladd, A. J. New Monte Carlo method to compute the free energy of arbitrary solids. Application to the fcc and hcp phases of hard spheres. J. Chem. Phys. 81, 3188–3193 (1984).
MacDowell, L. G., Sanz, E., Vega, C. & Abascal, J. L. F. Combinatorial entropy and phase diagram of partially ordered ice phases. J. Chem. Phys. 121, 10145–10158 (2004).
Espinosa, J. R. et al. Ice Ih vs. ice III along the homogeneous nucleation line. Phys. Chem. Chem. Phys. 21, 5655–5660 (2019).
Bore, S. L., Piaggi, P. M., Car, R. & Paesani, F. Phase diagram of the TIP4P/Ice water model by enhanced sampling simulations. J. Chem. Phys. 157, 054504 (2022).
Zhai, Y., Caruso, A., Bore, S. L., Luo, Z. & Paesani, F. A “short blanket” dilemma for a state-of-the-art neural network potential for water: Reproducing experimental properties or the physics of the underlying many-body interactions? J. Chem. Phys. 158, 084111 (2023).
Melko, R. G., den Hertog, B. C. & Gingras, M. J. Long-range order at low temperatures in dipolar spin ice. Phys. Rev. Lett. 87, 067203 (2001).
Habershon, S., Markland, T. E. & Manolopoulos, D. E. Competing quantum effects in the dynamics of a flexible water model. J. Chem. Phys. 131, 024501 (2009).
Li, X.-Z., Walker, B. & Michaelides, A. Quantum nature of the hydrogen bond. Proc. Natl Acad. Sci. USA 108, 6369–6373 (2011).
Noya, E. G., Vega, C., Sesé, L. M. & Ramírez, R. Quantum effects on the maximum in density of water as described by the TIP4PQ/2005 model. J. Chem. Phys. 131, 124518 (2009).
Kapil, V., Engel, E., Rossi, M. & Ceriotti, M. Assessment of approximate methods for anharmonic free energies. J. Chem. Theory Comput. 15, 5845–5857 (2019).
Pople, J. A. Nobel lecture: quantum chemical models. Rev. Mod. Phys. 71, 1267 (1999).
Piaggi, P. M., Weis, J., Panagiotopoulos, A. Z., Debenedetti, P. G. & Car, R. Homogeneous ice nucleation in an ab initio machine-learning model of water. Proc. Natl Acad. Sci. USA 119, e2207294119 (2022).
Espinosa, J., Sanz, E., Valeriani, C. & Vega, C. Homogeneous ice nucleation evaluated for several water models. J. Chem. Phys. 141, 18C529 (2014).
Kringle, L., Thornley, W. A., Kay, B. D. & Kimmel, G. A. Reversible structural transformations in supercooled liquid water from 135 to 245 K. Science 369, 1490–1492 (2020).
Keutsch, F. N. & Saykally, R. J. Water clusters: untangling the mysteries of the liquid, one molecule at a time. Proc. Natl Acad. Sci. USA 98, 10533–10540 (2001).
Gallo, P. et al. Water: a tale of two liquids. Chem. Rev. 116, 7463–7500 (2016).
Riera, M., Yeh, E. P. & Paesani, F. Data-driven many-body models for molecular fluids: CO2/H2O mixtures as a case study. J. Chem. Theory Comput. 16, 2246–2257 (2020).
Riera, M., Hirales, A., Ghosh, R. & Paesani, F. Data-driven many-body models with chemical accuracy for CH4/H2O mixtures. J. Phys. Chem. A 124, 11207–11221 (2020).
Lambros, E. et al. General many-body framework for data-driven potentials with arbitrary quantum mechanical accuracy: water as a case study. J. Chem. Theory Comput. 17, 5635–5650 (2021).
Bull-Vulpe, E., Riera, M., Götz, A. & Paesani, F. MB-Fit: software infrastructure for data-driven many-body potential energy functions. J. Chem. Phys. 155, 124801 (2021).
Bull-Vulpe, E. F., Riera, M., Bore, S. L. & Paesani, F. Data-driven many-body potential energy functions for generic molecules: linear alkanes as a proof-of-concept application. J. Chem. Theory Comput. https://doi.org/10.1021/acs.jctc.2c00645 (2022).
Bore, S. L. & Paesani, F. Realistic phase diagram of water from “first principles” data-driven quantum simulations. Zenodo https://doi.org/10.5281/zenodo.7863744 (2023).
Paesani group (UC San Diego). MBX: an energy and force calculator for data-driven many-body potential energy functions. https://github.com/paesanilab/MBX (2021).
Wang, H., Zhang, L., Han, J. & Weinan, E. DeePMD-kit: a deep learning package for many-body potential energy representation and molecular dynamics. Comput. Phys. Commun. 228, 178–184 (2018).
Thompson, A. P. et al. LAMMPS – a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales. Comput. Phys. Commun. 271, 108171 (2022).
Tribello, G. A., Bonomi, M., Branduardi, D., Camilloni, C. & Bussi, G. PLUMED 2: new feathers for an old bird. Comput. Phys. Commun. 185, 604–613 (2014).
Kapil, V. et al. i-PI 2.0: a universal force engine for advanced molecular simulations. Comput. Phys. Commun. 236, 214–223 (2019).
Conde, M., Rovere, M. & Gallo, P. High precision determination of the melting points of water TIP4P/2005 and water TIP4P/Ice models by the direct coexistence technique. J. Chem. Phys. 147, 244506 (2017).
Acknowledgements
We are grateful to Pablo Piaggi for his aid in setting up the environments, including both oxygen and hydrogen atoms, for the enhanced-coexistence simulations involving ice II. We thank Bingqing Cheng for providing the updated figure of the revPBE0-D3 chemical potentials and making the i-PI input files for the revPBE0-D3 simulations available on GitHub, which were of great help in calculating the quantum corrections to the chemical potentials, and Carlos Vega and Venkat Kapil for their comments on the initial version of our manuscript and insights about the Einstein Molecule and Debye Crystal methods. This research was supported by the Air Force Office of Scientific Research grant no. FA9550-20-1-0351 (S.L.B. and F.P.). Computational resources were provided by the Department of Defense High Performance Computing Modernization Program (HPCMP), the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by the National Science Foundation through grant no. 1548562, the Advanced Cyberinfrastructure Coordination Ecosystem: Services & Support (ACCESS) program, which is supported by National Science Foundation grants nos. 2138259, 2138286, 2138307, 2137603, and 2138296, the Triton Shared Computing Cluster (TSCC) at the San Diego Supercomputer Center (SDSC), and the Scientific Computing Core at the Flatiron Institute, a division of the Simons Foundation.
Author information
Authors and Affiliations
Contributions
F.P. conceived the research. S.L.B. and F.P. designed the research. S.L.B. performed the simulations. S.L.B and F.P. analyzed and discussed the results, and wrote the paper. F.P. acquired funding and administered the project.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Ji Chen and the anonymous, reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Bore, S.L., Paesani, F. Realistic phase diagram of water from “first principles” data-driven quantum simulations. Nat Commun 14, 3349 (2023). https://doi.org/10.1038/s41467-023-38855-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-38855-1
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
