Introduction

Enantioenriched indole derivatives are of great interest in pharmaceutical science and organic chemistry1,2,3,4. Particularly, the indole core is one of the most frequent N-heterocyclic fragment featured in FDA-approved drugs5. Therefore, different methods have been designed for the construction of chiral indole scaffolds6,7,8,9. The most typical functionalizations of indoles take place at the C3 positions, due to their innate nucleophilicity10,11. In contrast, the development of techniques involving a stereocenter adjacent to the nitrogen, an essential structural motif imbedded in many biologically active molecules (Fig. 1A)12,13,14,15,16, remains a great challenge, presumably owing to the attenuated nucleophilicity of the nitrogen atom (Fig. 1B). To this end, a few powerful C-N bond-forming approaches have been developed to access chiral N-alkylindoles (Fig. 1B). However, these transformations often rely on the enantioselective intramolecular addition of prefunctionalized indole substrates17,18,19, or intermolecular N-alkylation (mostly N-allylation) of indoles with C3-blocking substituents20,21,22,23,24,25 or electron-withdrawing groups26,27,28,29,30,31,32,33. Moreover, indirect methods using indole precursors such as indolines or aryl hydrazines were also developed to obtain high regio- and enantioselectivity34,35,36. Recently, the Vilotijevic and Buchwald groups demonstrated elegant works using N-modificated strategy to engage N-silyl indoles and N-(benzoyloxy)indoles in C-N bond-forming reactions, respectively37,38. Despite these remarkable advances, a general, modular and selective synthesis of enantioenriched N-alkylindoles is in crucial demand, particularly if the substrates and catalysts are readily available39,40.

Fig. 1: Representative chiral N-alkylindole derivatives and strategies for catalytic enantioselective synthesis of N-alkylindoles.
figure 1

A Representative biologically active chiral N-alkylindole derivatives; B Existing C–N bond-forming methods to access chiral N-alkylindole derivatives; C C–C bond-forming strategy to access chiral N-alkylindole derivatives; D This work: catalytic, modular, unified coupling of α-N-alkyl-Ni species.

New strategic bond-forming reactions would offer a complementary protocol to existing C-N bond-forming process and an opportunity to explore currently inaccessible chemical space. In this regard, the enantioselective coupling of an α-N-alkyl metal species or an α-N-alkyl radical species represents a straightforward strategy to the synthesis of chiral alkylindoles (Fig. 1C)41,42. However, forging a C–C bond asymmetrically at the position α to the indole nitrogen remains elusive43,44,45. Recently, the Melchiorre43 and Davidson44 groups independently reported impressive works using photoredox chemistry to engage indole-derived α-N-alkyl radical intermediates in N-alkylindole synthesis, despite limited substrate scope and enantioselectivity (Fig. 1C, right). Moreover, in the the case, a leaving group (-CO2H or DHP) is necessary for the generation of an α-N-alkyl radical. In contrast, there have been no reports on generation and coupling of indole-derived α-N-alkyl metal species. The enantioselective Ni-catalyzed reductive coupling of olefins with electrophiles represents an attractive utilization of in-situ generated alkyl-Ni species46,47,48,49,50,51,52. We wondered whether this reductive coupling strategy could be harness to access chiral N-alkylindoles. However, catalytic enantioselective reductive coupling of N-alkenyl indoles faces several challenges. First, current asymmetric reductive coupling is largely limited to the use of liner alkyl–Ni intermediates46,47,48,49,50,51,52,53,54,55,56,57,58. Catalytic enantioselective coupling of branched alkyl–Ni intermediates generated from hydronickellation of olefins remains elusive59,60,61,62,63. Moreover, modulation of the site-selectivity pattern across differently substituted N-alkenyl indoles is unknown. In addition, the propensity of N-alkenyl polymerization and reduction is possible64,65,66,67.

As a part of our interest in chiral alkylamine-bearing molecules25,68, here, we show a catalytic enantioselective coupling of in-situ generated α-N-alkyl nickel species with aryl/alkenyl/alkynyl bromides, analogous to the C(sp3)–C(sp2)/C(sp) cross-coupling reaction, enabling a unified method toward structually diverse chiral N-alkylindoles in high yields and ee’s (Fig. 1D). By employing mild conditions, this modular, unified fragment coupling provides practical advantages in reaction efficiency, functional group compatibility, as well as substrate availability and scope, which would be broadly useful yet mechanistically orthogonal to established N-alkylation processes. In particular, application in late-stage diversifcation of many natural products and drug molecules demonstrates its utility in accelerating access to N-alkylated drug-like complexity.

Results

Reaction discovery and investigations

By the use of 4-bromophenylacetone as the coupling partner, we firstly examined the reaction of N-vinylindole 1a, representing a class of nucleophiles that has previously been unexploited in asymmetric nickel-catalyzed reactions although has been widely utilized as monomers for the synthesis of polymeric materials64,69. Upon investigating a series of reaction parameters (Table 1 and Supplementary Tables 16), we discovered that running of the cross-coupling partners at 40 °C for 20 h in the presence of NiCl2•DME, commercially available (S,S)-diphenyl-Box ligand (L*1), a hydride source (diethoxy-methylsilane), and a base (KF) provides the desired product in 36% yield and 79% enantiomeric excess (ee) as a single isomer (entry 1). Compared to L*1, employing bis-oxazoline analogs L*2-L*4 bearing alkyl substitutents (R) almost did not produce 3a. Moreover, the isopropylidene bridge of L*1 proved to be essential, as L*5 with gem-H could not afford the product. Inferior results were found with other chiral nitrogen-based ligands, such as pyridine-oxazoline (Pybox) and 2,2-bis(2-oxazoline) (Bi-Ox) ligands (entries 3–4). Further solvent screening indicated 1,2-dimethoxyethane was superior to other solvents, producing 3a in good yield and ee under room temperature (entry 5). Interestingly, the mixed solvent (DME/DCE) turned out as the best solvent to obtain both high yield and high enantioselectivity (entries 5–7), thus indicating the subtle interplay of reagents and solvents in this case. In addition, use of other nickel salts, NiBr2•DME resulted in higher ee (entry 8), while NiI2•xH2O gave the best result (entry 9).

Table 1 Summary of the effects of crucial reaction parametersa

Reaction scope

The generality of this catalytic enantioselective method is broad (Fig. 2). Concerning the aryl bromide, the reaction proceeded smoothly with a wide array of substrates to provide the corresponding products in moderate to high yields with universally high enantioselectivities. Notably, electron-deficient or electron-rich arenes were amenable coupling partners, in which the substituent could be placed at para and meta position. A variety of functionalities such as a nitrile (2b), trifluoromethyls (2c, 2p, 2r), esters (2d, 2m, 2q), halides (2f, 2g, 2n, 2o), ethers (2i, 2j) were all readily accommodated. Despite the ability of nickel complex to activated aryl chlorides, our approach could tolerate Ar-Cl groups (2f, 2o). In particular, sensitive functional groups including easily reduced ketone (2a) and aldehyde (2e), and triflate (2k) and boronic acid pinacol ester (2l) commonly used for cross-coupling, all remained intact under the standard reaction conditions. Furthermore, the pharmaceutically important heterocycle–pyridine (2r) was compatible as well.

Fig. 2: Scope of enantioselective synthesis of N-benzyl and N-allylic indoles enabled by Ni-catalyzed C(sp3)-C(sp2) coupling reactions.
figure 2

Conditions: aAll reactions were carried out with NiI2•xH2O (10 mol%), ligand L*1 (15 mol%), 1 (0.40 mmol), 2 (0.80 mmol), (OEt)2MeSiH (0.48 mmol), KF (0.60 mmol) and DME/DCE (3:1, 2.0 mL) at room temperature for 20 h; bDME as solvent, (OEt)2MeSiH (0.72 mmol), KF (0.88 mmol), 48 h.

Next, we sought to survey the influence of the N-vinylindole variants that could be used in the catalytic hydroarylation event. Delightfully, a diverse array of functional groups were suitable at different positions on the benzene ring of the indole, including a 6-methoxy (3s), 6-fluoro (3t), 6-cyano (3u), and 5-methyl (3v) substituent. It is worth noting that alkyl group at the C3-position of the indole scaffold was accommodated, delivering the corresponding product 3w in moderate yield but with excellent enantioselectivity, which is difficult to obtain employing previous CuH catalysis38. In addition, carbazole-derived substrate afforded the desired N-alkylated product in moderate yield and enantioselectivity (3x). Gratifyingly, a diverse set of more sterically hindered (Z)-N-alkenyl indoles were also successfully transformed utilizing this method, and the corresponding N-alkylindoles were readily prepared in useful yields with good levels of enantioselectivity (3y-3dd). However, (E)-N-alkenyl indoles performed lower reactivity and slightly lower enantioselectivity than their Z isomers (e.g., 3y: 19%, 84% ee vs. 41%, 87% ee). The isomerization of Z-N-alkenyl substrate to its E isomer was observed during the reaction process, and over 40% of the E/Z mixture could be recovered after the reaction (Supplementary Method 1.6). Of note, the C–C bond-forming event occurs regioselectively at the carbon α to the nitrogen of indoles, even in the presence of other directing groups such as amide (3z-3bb), ester (3cc), and aryl (3dd). Especially, this modular reaction could be applied to prepare important serotonin reuptake inhibitor derivatives with good efficiency and enantioselectivities (3z-3bb, 81–92% ee’s).

In addition to aryl bromides, vinyl bromides were incorporated as well in this reaction, leading to structually diverse chiral N-allyl indoles 4a-4f in 35–60% yields with 73–95% ee values. Remarkably, this modular alkenylation complements previously established metal-catalyzed indole N-allylations in that di- and trisubstituted allylic products bearing aryl and alkyl groups are readily accessed27,29,31,70,71.

Besides the C(sp2) bromides, this catalytic C-C bond-forming reaction was also viable for C(sp) bromides–bromoalkynes 5. While the above standard conditions with ligand L*1 resulted in poor enantiocontrol for the C(sp3)-C(sp) coupling (e.g., 6a: 28% yield, 55% ee), delightfully, the reaction selectivity could be significantly improved by further optimization efforts (see Supplementary Table 7). As shown in Fig. 3, the treatment of bromoalkynes 5 and N-alkenylindoles 1 with 10 mol% NiI2 as the catalyst, 15 mol% L*8 as the ligand at 0 °C could yield the corresponding chiral N-propargyl indoles 6 in mostly good yields (25–89%) and high levels of enantioselectivity (ee values of 80–97%). A variety of N-alkenyl indoles substituted at the 4-position (6b), 5-position (6c-6g), 6-position (6h-6j), and 7-position (6k, 6l) each underwent efficient hydroalkynylation to provide the corresponding products with uniformly high enantioselectivities. Of note, alkyl group at the C3-position of the indole scaffold was demonstrated being tolerated again (6m). With regard to medicinal chemistry applications, the generation of product 6g demonstrates tolerance of a pinacol boronate subunit under the conditions of catalytic enantioselective alkynylation. Additionally, more sterically hindered cis-β-substituted N-alkenyl indoles also successfully underwent C(sp3)-C(sp) bond-formation to deliever compounds 6o and 6p, respectively, as single regioisomers with reasonable yields and good enantioselectivities. Similar to the C(sp3)-C(sp2) coupling, the reaction reactivity and stereoselectivity was influenced by the Z and E configuration of N-alkenyl indoles (e.g., 6o).

Fig. 3: Scope of enantioselective synthesis of N-propargyl indoles enabled by Ni-catalyzed C(sp3)-C(sp) coupling reactions.
figure 3

Conditions: a All reactions were carried out with NiI2 (10 mol%), ligand L*8 (15 mol%), 1 (0.10 mmol), 5 (0.25 mmol), (OEt)2MeSiH (0.30 mmol), KF (0.30 mmol) and DME (0.25 mL) at 0 °C for 36 h; b NiI2·xH2O instead of NiI2; c MeCN instead of DME; d Pybox ligand (S,S)-L*17 instead of L*8, K3PO4 instead of KF, 40 °C, 24 h (see SI for details). TIPS = triisopropylsilyl; TBS = t-butyldimethylsilyl.

Beyond the TIPS-substituted ethynyl bromide 5a, TBS- and 3° alkyl-substituted ethynyl bromides 5b-5c proved to be viable coupling partners in this system, affording the desired indole adducts (6q-6r) in 47–74% yields with excellent enantioselectivities. However, ethynyl bromides with less steric hindered alkyl and aryl substitutents delivered inferior results (e.g., R3 = n-Bu: no reaction; R3 = Ph: 26% yield, 50% ee). In addition, it should be noted that the current L*8-ligated nickel catalysis could be expanded to enable the synthesis of chiral N-benzyl and N-allylic indoles in high enantioselectivities (e.g., 3a’ and 4e’).

Synthetic applications

More importantly, the present method could be applied in late-stage diversification of complex drug molecules and natural products72. As depicted in Fig. 4, aryl bromides derived from complexe bioactive molecules canagliflozin derivative, an antidiabetic drug (7a), indomethacin, a nonsteroidal anti-inflammatory drug (7b), and vitamin E, an antioxidant (7c), coupled with N-vinylindole 1a in good yields and stereoselectivities, thus revealing the appeal that our approach might have for lead generation protocols in drug discovery. Furthermore, aryl bromides or N-alkenyl indoles bearing multiple stereocenters originated from vitamin E (7c), D-galactopyanose (7d), and citronellal (7e) were all viable substrates, affording potentially valuable N-alkyl adducts in synthetically useful yields and high diastereoselectivity. To further showcase the robustness and synthetic utility of the method, the catalytic enantioselective synthesis of N-benzyl indole 7a on a gram scale was carried out with similar efficiency (Supplementary Method 1.7).

Fig. 4: Late-stage diversification of drug molecules and natural products.
figure 4

Conditions: All reactions were carried out with NiI2•xH2O (10 mol%), ligand L*1 (15 mol%), 1a or citronellal-derived 1u (0.40 mmol), drugs- or ntural products-derived 2 (0.80 mmol), (OEt)2MeSiH (0.48 or 0.72 mmol), KF (0.60 or 0.88 mmol) and DME/DCE (3:1, 2.0 mL) at room temperature for 20 or 48 h.

Notably, the alkynyl group on the chiral N-propargyl indoles prodvided a useful and versatile handle for derivatizations (Fig. 5). For eaxmple, desilylation of 6a provided the enantioenriched terminal alkyne 8, which subsequently underwent the Sonogashira coupling to afford the aryl-substituted alkynye product 9. Terminal alkyne 8 underwent a click reaction to give chiral triazole 10. Reduction of 8 with Lindlar Pd and H2 afforded chiral N-allylic indole 11, while reduction of 6a with DIBAL-H produced chiral vinylsilyl compound 12.

Fig. 5: Derivatizations of chiral N-propargyl indoles.
figure 5

Desilylation and alkynyl reduction of compound 6a; Sonogashira coupling, [3 + 2] cycloaddition, and hydrogenation of compound 8. DIBAL-H = diisobutylaluminum hydride; Lindlar Pd = Pd/BaSO4; CuTc = copper(I) thiophene-2-carboxylate.

Mechanistic studies

To gain insight into the mechanism and origin of selectivity, a series of experiments well conducted. Generally, the reductive coupling process consists of π-bond insertion into L*Ni−H species, oxidative addition of the resulting L*Ni-alkyl intermediate, and reductive elimination to form product and the L*Ni-H catalyst46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63. Take the reductive coupling of N-alkenyl indoles with aryl halides as an example, competition experiments were performed to compare the reactivity between different aryl halides, indicating that (i) electron-deficent aryl bromide is more reactive than an electron-rich one (Fig. 6a–i), and (ii) aryl bromide is more reactive than aryl iodide (Fig. 6a–ii). In fact, a competing reductive hydrodehalogenation event was observed when an aryl iodide was uesd as the electrophile (Fig. 6a–iii)73,74, suggesting it is disadvantaged for the final product formation that oxidative addition of L*Ni complex prior to generation of L*Ni-alkyl intermediate. Next, the reductive coupling of 1a was chosen for kinetic studies, and the reaction progress was monitored by 19F and 1H NMR. Initial rate experiments disclosed that the reaction was zero-order in N-alkenyl indole, first-order in catalyst and aryl bromide, and fractional-order in diethoxymethylsilane (Fig. 6b, see also Supplementary Method 1.9.1). Moreover, Hammett studies were also performed to evaluate the influence that electronic variation of the aryl electrophiles had on the rate of hydroarylation (Fig. 6c)75,76. As a result, a variety of para-substituted aryl bromides reacted with N-vinylindole 1a at different rates, indicating that electronic variation of the aryl electrophile had a remarkable impact on the rate of N-vinylindole hydroarylation. A linear relationship was further observed through a Hammett plot. The positive slope (ρ = 0.67) suggests negative charge accumulation in the turnover-determining transition state, which is stabilized by electron-withdrawing substituents. Taken together, the above results reveal that oxidative addition is most likely the turnover-limiting step.

Fig. 6: Mechanistic experiments.
figure 6

a Competition experiments ([N] = N-indolyl); b Initial rate experiments; c Hammett study for the formation of 3 versus the corresponding σ value (k = reaction rate).

Furthermore, a linear correlation was observed by nonlinear effect studies on the enantiomeric composition of chiral ligand L*1 and N-alkylindole product 3o (Fig. 7a), which is consistent with a ligated nickel catalyst being of a monomeric nature. To identify the enantiodetermining step of the N-vinylindole hydroarylation reaction, we next investigated linear free energy relationships (LFERs) between the Hammett electronic parameters of various para-substituted aryl bromides and the enantioselectivities of the corresponding products (Fig. 7b)77,78. A linear correlation was observed with para-substituted aryl bromides as enantioselectivity increased with the introduction of electron-withdrawing groups (ρ = 1.07): 56% ee and 92% ee were observed for 4-methoxyphenyl bromide (σ = −0.27) and 4-acetylphenyl bromide (σ = 0.50), respectively, implying that the enantioselectivity of the process is not solely under catalyst control. In addition, the silane did essentially not affect the enantioselectivity of the reaction. On the basis of these results, oxidative addition is most likely the enantiodetermining step.

Fig. 7: Further mechanistic experiments.
figure 7

a Nonlinear effect study; b Hammett plot for the enantiomeric ratio (er) of hydroarylation products using para-substituted aryl bromides.

As shown in Fig. 8, a more complete description of the proposed mechanism is outlined. The syn-hydrometallation of an L*Ni-H species into an N-alkenyl indole would form alkyl-Ni(I) species (B). Subsequently, the selective oxidative addition between a particular isomer of the alkyl-Ni(I) species and the bromide (2, 5) would ultimately generate a single alkyl-Ni(III)-R enantiomer (C), because this step would be both the turnover-determining step and the enantio-determining step in the presence of a chiral ligand (L*1, L*8). In particular, the favored enantioselective transition state TS-C would lead to the major enantiomeric product, owing to steric interations with the ligand phenyl substituents (TS-C’). Then, stereospecific reductive elimination would afford the desired product (3, 4, 6, 7) and regenerate the active nickel hydride species (A). Alternatively, the competitive alkyl-Ni homolysis process was also possible53,55,62,79.

Fig. 8: Possible reaction pathway.
figure 8

The selective oxidative addition is proposed to be both the turnover-determining step and the enantio-determining step. [N] = N-indolyl; TS = transition state.

In summary, we have developed a nickel-catalyzed enantioselective, modular coupling of indole-based N-alkyl-Ni fragments with C(sp2)/C(sp) bromides. By the use of easily accessible and stable indole-derived alkenes as nucleophiles, this protocol enables streamlined preparation of enantioenriched N-alkylindole molecules under mild conditions, with previously inaccessible functional group tolerance and chemical space. Application in late-stage diversification of several complex drug molecules and natural products as well as chiral syntheses demonstrates its potential utility in the synthesis of valuable chiral N-alkylated bioactive compounds.

Methods

General procedure for the enantioselective synthesis of N-benzyl and N-allylic indoles

To an oven-dried 8.0 mL Teflon-screw cap test tube containing a magnetic stir was charged with NiI2•xH2O (16.8 mg, 10 mol%) and ligand L*1 (20.2 mg, 15 mol%) under an N2 atmosphere using glove-box techniques. Subsequently, anhydrous DME (1.5 mL) was added, and the mixture was stirred for 15 min at room temperature. Next, KF (35.0 mg, 0.60 mmol, 1.5 equiv.), N-alkenyl indole 1 (0.40 mmol, 1.0 equiv), aryl/alkenyl bromide 2 (0.80 mmol, 2.0 equiv.), DCE (0.5 mL), and (OEt)2MeSiH (78.0 uL, 0.48 mmol, 1.2 equiv.) were sequentially added. Then the tube was sealed with airtight electrical tapes and removed from the glove box and stirred at room temperature for 20–48 h. After that, the reaction mixture was diluted with saturated NH4Cl (aq., 1.0 mL) and EtOAc (5.0 mL). The aqueous phase was extracted with EtOAc (2 × 5.0 mL) and the combined organic phases were concentrated. The crude mixture was purified by flash column chromatography on silica gel using a mixture of PE/EtOAc as eluent to obtain the desired product 3, 4, 7.

General procedure for the enantioselective synthesis of N-propargyl indoles

To an oven-dried 12 mL Teflon-screw cap test tube containing a magnetic stir was charged with NiI2 (3.1 mg, 10 mol%) and ligand L*8 (7.7 mg, 15 mol%) under a nitrogen N2 atmosphere using glove-box techniques. Subsequently, anhydrous DME (0.25 mL) was added, and the mixture was stirred for 30 min at room temperature. Next, KF (17.4 mg, 0.30 mmol, 3.0 equiv), N-alkenyl indole 1 (0.10 mmol, 1.0 equiv), alkynyl bromide 5 (0.25 mmol, 2.5 equiv), and (OEt)2MeSiH (43.0 µL, 0.30 mmol, 3.0 equiv.) were sequentially added. Then the tube was sealed with airtight electrical tapes and removed from the glove box and stirred at 0 °C for 36 h. After that, the reaction mixture was diluted with saturated NH4Cl (aq., 1.0 mL) and EtOAc (5.0 mL). The aqueous phase was extracted with EtOAc (2 × 5.0 mL) and the combined organic phases were concentrated. The crude mixture was purified by flash column chromatography on silica gel using a mixture of PE/EtOAc as eluent to obtain the desired product 6.