The natural bacterial spores have inspired the development of artificial spores, through coating cells with protective materials, for durable whole-cell catalysis. Despite attractiveness, artificial spores developed to date are generally limited to a few microorganisms with their natural endogenous enzymes, and they have never been explored as a generic platform for widespread synthesis. Here, we report a general approach to designing artificial spores based on Escherichia coli cells with recombinant enzymes. The artificial spores are simply prepared by coating cells with polydopamine, which can withstand UV radiation, heating and organic solvents. Additionally, the protective coating enables living cells to stabilize aqueous-organic emulsions for efficient interfacial biocatalysis ranging from single reactions to multienzyme cascades. Furthermore, the interfacial system can be easily expanded to chemoenzymatic synthesis by combining artificial spores with metal catalysts. Therefore, this artificial-spore-based platform technology is envisioned to lay the foundation for next-generation cell factory engineering.
In biology, cells have evolved defensive mechanisms against the unfavorable environment1. An inspiring example is the bacterial spores that are enveloped with multilayered barriers/coats to shield environmental stresses, e.g., UV radiation and chemical assault, for preserving DNA machinery2,3,4. Today, these defensive spores can be repurposed for synthetically useful biotransformation. For instance, endospores from Bacillus subtilis and Saccharomyces cerevisiae are engineered for catalysis in the presence of adverse radicals or organic solvents5,6. However, natural spores for catalysis are inherently limited by few available microbes and their metabolic dormancy with depressed enzyme activities7,8.
These limitations have spurred the current interest in artificial spores, in which vegetative cells are chemically coated by cytoprotective materials to endow durable cell-in-shell capsules, resulting in single-cell nanoencapsulation9,10 or individual surface-engineered microorganisms11. Distinct from naturally occurring dormant spores, artificial spores are the encapsulated living cells that are not only robust but also metabolically active, thus holding great potential for biosynthesis12,13,14. In a pioneering study, Tang’s group prepared the silica coating on cyanobacteria to shield UV light stress for photosynthesis15. Since then, various microbes with their natural endogenous enzymes have been artificially sporulated for value-added chemicals production from asymmetric synthesis to renewable energy16,17,18. These successes verify the advantage of artificial spores for robust catalysis under challenging conditions, thus appealing for industrial operation. However, these previous efforts are mainly devoted to individual biosynthesis17,18, and artificial spores have never been developed into a generic synthetic platform. In this context, it is surprising that Escherichia coli (E. coli) cells, a model cell factory, have been rarely sporulated for synthetic purposes to date despite their capacity of high-level expression of heterologous enzymes with flexible metabolism pathways19. The only reported example is from the Ansorge-Schumacher group, who coated lyophilized E. coli cells with silicone for selective carboligation, which, however, caused significant cell death20. On the other hand, cell viability is essential to whole-cell catalysis, offering long-term enzyme activity and expensive cofactors regeneration21. Therefore, the development of viable E. coli cells-based artificial spores is desirable because they provide not only a robust microbial host but also a versatile cell factory, where various recombinant enzymes can be expressed for valuable chemical transformations.
Here, we propose a simple yet general approach to preparing living E. coli cells based artificial spores via a biocompatible polydopamine coating and showcase their capacity for challenging interfacial catalysis (Fig. 1). In chemistry, many reactions are designed deliberately with catalysts at the interface of water-organic emulsions, which belongs to the process called “interfacial catalysis”22. Interfacial catalysis is an important research field because it offers a large surface area for fast reactions. However, its application is generally limited to stable catalysts due to the adverse interfacial environment, e.g., interfacial tension and shear force, which are deleterious to vulnerable catalysts, especially to biocatalysts23,24,25,26. Therefore, performing interfacial reactions is notoriously challenging in catalyst design, and there is no report of living E. coli cells for interfacial catalysis as a result of susceptible cellular structure and difficulty in maintaining intracellular enzyme activity. We opt to apply artificial spores for interfacial catalysis because its challenging environment is an ideal tool to evaluate the robustness of artificial spores. Furthermore, interfacial reactions have remarkable catalytic efficiency suitable for both polar and nonpolar substrates27,28, thus enabling to promote artificial spores for a broad-spectrum synthesis.
In this work, dopamine (DA) is chosen to coat the E. coli surface because of its proven biocompatibility and protectivity against external stresses. Another component, N-oleoyl dopamine (OLDA), is co-coated on cells to tailor their surface hydrophobicity. At the optimal ratio between DA and OLDA, the artificially sporulated cells can emulsify an organic-aqueous biphasic reaction medium into emulsions, creating a large interface area for reactions (Fig. 1). Challenged by this emulsion condition, the sporulation protects cells from environmental stresses while allowing recombinant enzymes in artificial spores for various biotransformation ranging from single-step reactions to multienzyme cascades. Furthermore, a chemo-enzymatic cascade by artificial spores and palladium particles is demonstrated. As a result, a robust versatile cell factory is enabled by the living E. coli cells based acritical spores, suggesting its fascinating perspective for future synthetic chemistry.
Results and discussion
Characterization of artificial spores
The sporulation process could be identified visually by the cell suspension turning into deep black color upon polydopamine coating29. After a washing step, UV-Vis and zeta potential analysis were conducted to characterize the physical property change of the cell surface. Strong absorption at 280 nm was observed on the artificial spores, which was in contrast to the control of uncoated cells with no specific absorption (Supplementary Fig. 1). Furthermore, the coating resulted in the zeta potential changing from negative to positive due to the significant presence of amino groups on the coated cells (Supplementary Fig. 2). To gain more insights into the shell, cross-sectional transmission electron microscopy (TEM) was employed to investigate the structures of artificial spores and uncoated cells (Fig. 2a). A black shell was observed on the artificial spore (Fig. 2e, f) with an average thickness of 40 nm (Fig. 2e), while there was no such shell found on uncoated cells (Fig. 2b, c). This structure difference indicates the successful formation of a polydopamine shell on E. coli cells. Further investigation by scanning electron microscopy (SEM) was performed to study the morphology changes of the coated cell surface. As shown in Fig. 2d, uncoated cells have comparatively smooth membranes, while on the artificial spores, cells were closely packed by polydopamine nanoparticles (Fig. 2g). Consequently, these microscopic studies strongly suggest the occurrence of artificial sporulation, which provides the base for further investigation of artificial spores’ functions.
Biocompatibility of the sporulation process
After physical/microscopic studies, the sporulation was evaluated for its biocompatibility using live/dead assays30. The uncoated E. coli cells were taken as the control, whereby only green fluorescence (live cells) was observed (Fig. 3a). For the artificial spores, the majority of cells were in the green color (>97%) with only a few in red (dead cells) (Fig. 3b). This indicates that our coating is biocompatible with minimized cell destruction, which is in line with previous observations on other cells29. This positive finding motivated us to study the proliferative ability of artificial spores (Fig. 3c). Although the artificial spores showed a delayed growth curve compared to the uncoated E. coli cells, the two kinds of cells had similar growth ability, which is consistent with previous reports31. The above results collectively demonstrate that the sporulation is a mild process, allowing for cell division even after the coating.
Protectability from external stresses
The successful coating on E. coli cells encouraged us to explore their protectability from environmental stresses. In the first experiment, both coated and uncoated cells were exposed to UV radiation (Fig. 4a), which is a known antibacterial condition to E. coli cells32. The live/dead assay showed that 2 h UV treatment caused significant death to the uncoated cells but only slightly affected to the coated cells (> 85% viability), suggesting the coating to be UV-protective (Fig. 4b, c). Subsequently, both cells were subjected to a water-toluene biphasic medium to evaluate if the coating could withstand the interfacial stress (Fig. 4e), which is important to their future use in interfacial catalysis. Interestingly, the interfacial exposure led to 90% cell death for uncoated cells (Fig. 4f), but the sporulated shell largely protected cells from the interfacial environment with over 80% cell viability (Fig. 4g). These results illustrate the robustness of the artificial spores, which would be of great interest for their catalytic assessment. In this context, we overexpressed benzaldehyde lyase (BAL) in E. coli cells, followed by the polydopamine coating, and then treated them under four types of harsh environmental conditions. In all cases, enzymes in artificial spores showed better stability than in the native cells. For example, artificial spores maintained almost two-fold enzyme activity than native cells under 2 h UV exposure (Fig. 4d). A similar result was observed when treating cells with a water-toluene medium, whereby enzyme activity of artificial spore was also much higher (Fig. 4h). Moreover, the sporulated shell protected cells from the heating and acetonitrile solvent, resulting in their higher enzyme activity compared to the control samples (Supplementary Figs. 3, 4). The above findings, therefore, proved the protectability of the artificially sporulated cells against diverse environmental stresses, suggesting their potential as durable catalysts for challenging reaction conditions.
Emulsion formation by artificial spores
To explore interfacial biocatalysis, a prerequisite is to coat the cells with the appropriate surface amphiphilicity for emulsion formation. As such, the sporulation was tailored for the optimal cell surface by adjusting the coating condition using concentrations of OLDA from 0.4 to 0.65, 1.05, and 1.4 mg/mL, resulting in different ratios of OLDA to DA. Since OLDA and DA had different polarities, their co-coating in different ratios resulted in several hydrophobized cell surfaces (Supplementary Fig. 5). Subsequently, emulsions were prepared by mixing these coated cells with a biphasic mixture of cyclopentyl methyl ether (CPME) and PBS buffer, assisted with hand-shanking (Fig. 5a). The emulsion stability test suggested the most stable emulsions (in 24 h) obtained at 0.65 mg/mL OLDA (Fig. 5b, Supplementary Figs. 6, 7), which was thus used in the following investigations. The resultant emulsions were characterized for their size and type using microscopical approaches. A typical emulsion with 10–70 µm diameters was directly observed by visible-light microscopy (Fig. 5c), while the emulsion type was determined by identifying the location of two distinct dyes, Nile red (red, organic-solvent-soluble) and fluorescein isothiocyanate-labelled hyperbranched polyglycerol (green, water-soluble), in the emulsions. Confocal laser scanning microscopy (CLSM) images showed that an oil-in-water emulsion was typically formed (Fig. 5d). To get further insight into the cell distribution within the emulsions, we prepared the emulsions using artificial spores overexpressed with green fluorescent protein (GFP) (Fig. 5e). The CLSM images (Fig. 5f, g) showed that the fluorescent cells were mainly allocated on the emulsion surface, demonstrating that the emulsions were indeed stabilized by artificial spores. A similar observation was made by SEM analysis (Fig. 5h, Supplementary Fig. 8), where artificial spores fully assembled on the outer layer of the emulsion surface with micron-sized pores. This closely packed porous structure illustrates the sufficient amount of cells on the emulsions with pores facilitating structures for substrate access, which should be beneficial to a fast mass transfer in catalysis.
Proof-of-concept of interfacial biocatalysis
Given the unique composition and structure of the emulsions, they were of high interest for their use in catalysis. As a proof-of-concept, we started with a robust enzyme, Candida antarctica lipase B (CalB) that was overexpressed in E. coli cells prior to emulsion formation. A model esterification reaction was established for catalysis evaluation, as shown in Fig. 6a. Since interfacial catalysis is known for its dependency on emulsion preparation33, we optimized the emulsions in terms of their oil-to-water ratio and found that this ratio had a significant impact on the enzyme activity (Fig. 6b). Increasing the organic phase fraction from 10 to 50% dramatically enhanced the enzyme activity, but its further increase led to decreased activity. This activity variation was explained by the formation of different emulsions that could be observed from the CLSM images in Supplementary Fig. 10. The interface area of these different emulsions can be calculated from their droplet sizes and numbers34,35. Typically, a large interface area resulted in higher enzyme activity, and the best activity was achieved with 50% organic fraction (Fig. 6b). Moreover, we investigated the influence of different concentrations and hydrophobicity of artificial spores on their interfacial catalytic performance. Typically, increasing artificial spores from 3.2 to 6.4 × 109 cells/mL led to the faster initial reaction rate, but their further increase did not improve the bioconversion over 2 h (Supplementary Fig. 11). Besides, cells surface properties were optimized for the best bioconversion with OLDA 0.65 mg/mL modification (Supplementary Fig. 12). Therefore, an optimal Pickering emulsion could be prepared from 6.4 × 109 cells/mL with 0.65 mg/mL OLDA coating. Next, this optimal emulsion was compared with two benchmark controls: i) a biphasic reaction medium with uncoated cells, and ii) a classic emulsion stabilized by silica nanoparticles (NPs) and with uncoated cells. For a fair comparison, all reactions were performed under the same conditions with the same amount of E. coli cells. Figure 6c showed that artificial spores had a much better catalytic performance than both controls. Specifically, CalB activity in artificial spores was 300-fold higher than in biphasic medium and 3 times greater than in particle-stabilized emulsions (Supplementary Fig. 13). This activity enhancement is ascribed to the large interface area of the emulsions as well as the protective effects of the artificial spores. Since the artificial spores are stable and do not lose their integrity during centrifugation, they could be recycled five times without significant loss of enzyme activity (Fig. 6d). Such reusability was also confirmed by the fact that recycled cells from the emulsions were still metabolite-active (Supplementary Fig. 14). Therefore, this proof-of-principle study illustrates the highly reactive and recyclable artificial spores for interfacial catalysis.
As E. coli is the most popular platform for recombinant protein expression, we were interested in if other types of enzymes could be also suitable for our artificial spores. To this end, we overexpressed two other different enzymes in E. coli for interfacial reactions. The first one was benzaldehyde lyase (BAL), which was a relatively sensitive enzyme and was used for C-C coupling reaction (Fig. 6e). Experimental data showed that in the artificial spores, BAL was still active under the interfacial environment, achieving 200-time higher activity than the biphasic medium with uncoated cells (Fig. 6f, Supplementary Fig. 15). With this success, we then studied a cofactor-dependent enzyme, alcohol dehydrogenase Rhodococcus ruber (ADH-a), in coated E. coli cells (Fig. 6g). Interestingly, ADH-a was not only active for 10 h but also performed without the supplement of nicotinamide adenine dinucleotide (NADH) in emulsions (Fig. 6h), illustrating that the cofactor was regenerated from the metabolite process of living cells. This cofactor regeneration eventually enabled artificial spores to achieve better catalysis than the control (Supplementary Fig. 16). Taken together, we have shown that artificially sporulated E. coli cells could act as a synthetic cell factory for single-step interfacial reactions with diverse enzymes ranging from stable to sensitive and cofactor-dependent enzymes.
The success in single-step reactions motivated us to further explore the feasibility of using artificial spores for multienzyme cascades. For easy preparation, three cascade routes were designed with some of the enzymes studied above. In the first cascade, alcohol dehydrogenase from Bacillus stearothermophilus (ADH-ht) and CalB were respectively overexpressed in two different E. coli cells, which were then artificially sporulated for the two-step interfacial reaction (Fig. 7a). As a result of the protectability, the coating allowed the whole-cell reaction to being performed without the supplementation of the external cofactor, achieving much faster reactivity than the biphasic control with uncoated cells (Fig. 7b, Supplementary Fig. 17). After the first success, we aimed at using the artificial spores for more value-added production, and therefore, a second cascade with ADH-ht and BAL was performed for the production of optically active α-hydroxy ketone (Fig. 7c), which is a convenient building block in many organic synthesis36. Figure 7d showed that a faster reaction was observed by ADH-ht and BAL compared to the biphasic system (Supplementary Fig. 18). Lastly, we could also combine BAL and CalB into our artificial spores for the fast two-step interfacial reactions (Supplementary Fig. 19). The success in these three types of multienzyme cascades suggests that living E. coli cells based artificial spores can be easily extended from single to multienzyme reactions without the compromise of their reactivity.
The combination of whole-cell and chemical catalysts is an attractive approach for developing multifunctional catalysts for advanced synthesis37. However, this combination remains a great challenge because of the mutual inactivation of both catalysts38,39. In particular, cells are prone to die in the presence of harmful chemical catalysts, accordingly leading to intramolecular enzyme inactivation40. To address this challenge, we utilized the protectability of artificial spores and constructed a hybrid catalyst system from them, in which palladium nanoparticles (Pd NPs) were in situ produced from artificial spores that contained CalB (Fig. 8a, see Methods for details). The successful loading of Pd NPs could be confirmed by scanning TEM imaging combined with energy-dispersive X-ray spectroscopy analysis (EDXS), as shown in Figure 8b, c. Interestingly, Pd NPs could be found both on the cell surface and inside the artificial spores. Their homogeneous distribution, however, raised our concern about the negative impact of intracellular Pd NPs to the cells. Hence, we assessed the cell proliferativity and growth ability after Pd NPs loading. Figure 8d showed that these Pd-treated cells had a similar growth profile and division behavior as normal artificial spores, indicating that the Pd NPs had only a minor effect on the cellular metabolite activity. Moreover, the presence of Pd NPs didn’t significantly change the cell surface morphology (Supplementary Fig. 20), but still allowed the artificial spores to stabilize an oil-in-water emulsion (Fig. 8e, f). The emulsion formation was then used for the chemoenzymatic reaction, as shown in Fig. 8g. The emulsion was able to catalyze a faster product formation with 350-fold higher activity than the biphasic control (Fig. 8h, Supplementary Fig. 21). This success indicates that artificial spores are a simple and robust platform that may be further developed by combining other chemical catalysts for different chemoenzymatic synthesis.
In summary, we developed a biocompatible polydopamine coating on E. coli cells, accordingly creating artificial spores that are featured with a cell-in-shell structure to protect the cells from various environmental stresses. This sporulation process is accomplished with only two chemical components, and thus can be easily adjusted to obtain an optimal cell surface for the formation of emulsions. On a broader perspective, this proof-of-principle study provides a facile method to the field of artificial spores where a plateau of other cells can be coated with an optimal surface for bio-related applications. Moreover, empowered by the protectability, these artificial spores are explored as a versatile cell factory, in which four different enzymes are overexpressed to catalyze interfacial reactions ranging from the single step to multienzyme cascades. In addition, we showcased that the catalytically active artificial spores are combined with Pd NPs for efficient chemoenzymatic cascades. With these successful demonstrations, we anticipate that our robust artificial spores can be further developed to address other challenges in synthetic cascades and biotransformation in general.
Commercial chemicals were used without further purification unless otherwise mentioned. Dopamine, oleic acid, and epoxy embedding medium kit were purchased from Sigma Aldrich. A bacterial viability kit was purchased from Thermo Fisher. Sodium tetrachloropalladate and sodium borohydride were purchased from abcr GmbH. The preparation of cell cultures and the expression of enzymes were described in the supplementary information.
Synthesis of N-oleoyl dopamine (OLDA)
The OLDA was synthesized according to the procedure described in the literature41. Typically, oleoyl chloride was added dropwise to the solution of dopamine (1.2 eq) and triethylamine (4 eq) in dichloromethane, and the crude product was purified by silica gel column chromatography (hexane-ethyl acetate) to obtain the OLDA.
Preparation of artificial spores
In general, E. coli cells were suspended in 20 mL Tris buffer (10 mM, pH 8.5) to a final optical density (OD600) of 2.0. Then the mixture (40 mg) of DA and OLDA with different ratios was dissolved in 2 mL dimethyl sulfoxide (DMSO) and added dropwise to coat the cells for 2 h. Subsequently, the coated cells were collected by centrifugation and washed 3 times. The cells were finally collected and re-suspended in 5 mL PBS buffer (10 mM, pH 7.4) for emulsion formation.
A typical emulsion was prepared for interfacial catalysis by mixing 0.5 mL phosphate-buffered saline (PBS buffer, 10 mM, pH 7.4 and 1 mM glucose) containing artificial spores and organic phase of cyclopentyl methyl ether (CPME), followed by handshaking. The reactions were initiated by adding substrates to the emulsions with a final concentration of 100 mM. All samples were prepared in triplicate and analyzed by gas chromatography (GC). The data were averaged for plotting at each time interval, and standard deviations were calculated as the error bars.
Pd NPs on artificial spores
An in situ reduction method was taken to produce Pd NPs in/on artificial spores. In a typical protocol, a sodium tetrachloropalladate solution was added to the artificial spore medium to reach a final concentration of 1 mM, and the mixture was then kept for 15 min. After three-time washing with PBS buffer (10 mM, pH 7.4), a sodium borohydride solution was subsequently provided with a final concentration of 1 mM for reducing the ion to Pd NPs for 15 min. Finally, the Pd-loaded artificial spores were washed 3 times with PBS buffer (10 mM, pH 7.4) and collected for further use.
Statistics and reproducibility
For SEM and TEM in Fig. 2b–g, two independent measurements were conducted with similar results. For cell viability assays in Figs. 3a, b, 4b, c, f, g, Supplementary Figs. 3a, b, and 4a, b, two independent measurements were performed with similar results. For the emulsion characterizations in Figs. 5c, d, f–h, 8b, c, f, Supplementary Figs. 7, 8a, b, 10, 14a, and 20, two independent measurements were conducted with similar results.
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
Randow, F., MacMicking, J. D. & James, L. C. Cellular self-defense: how cell-autonomous immunity protects against pathogens. Science 340, 701–706 (2013).
Nicholson, W. L., Munakata, N., Horneck, G., Melosh, H. J. & Setlow, P. Resistance of Bacillus endospores to extreme terrestrial and extraterrestrial environments. Microbiol. Mol. Biol. Rev. 64, 548–572 (2000).
Jedrzejas, M. J. The structure and function of novel proteins of Bacillus anthracis and other spore-forming bacteria: development of novel prophylactic and therapeutic agents. Crit. Rev. Biochem. Mol. Biol. 37, 339–373 (2002).
Benjdia, A., Heil, K., Barends, T. R. M., Carell, T. & Schlichting, I. Structural insights into recognition and repair of UV-DNA damage by Spore Photoproduct Lyase, a radical SAM enzyme. Nucleic Acids Res. 40, 9308–9318 (2012).
Kwon, S. J., Jung, H. C. & Pan, J. G. Transgalactosylation in a water-solvent biphasic reaction system with beta-galactosidase displayed on the surfaces of Bacillus subtilis spores. Appl. Environ. Microbiol. 73, 2251–2256 (2007).
Rao, J. et al. Efficient chiral synthesis by Saccharomyces cerevisiae spore encapsulation of Candida parapsilosis Glu228Ser/(S)-carbonyl reductase II and Bacillus sp. YX-1 glucose dehydrogenase in organic solvents. Microb. Cell Fact. 18, 87 (2019).
Lennon, J. T. & Jones, S. E. Microbial seed banks: the ecological and evolutionary implications of dormancy. Nat. Rev. Microbiol. 9, 119–130 (2011).
Black, E. P. et al. Response of spores to high-pressure processing. Compr. Rev. Food Sci. Food Saf. 6, 103–119 (2007).
Park, J. H. et al. A cytoprotective and degradable metal-polyphenol nanoshell for single-cell encapsulation. Angew. Chem. Int. Ed. 53, 12420–12425 (2014).
Kim, B. J. et al. Cytoprotective alginate/polydopamine core/shell microcapsules in microbial encapsulation. Angew. Chem. Int. Ed. 53, 14443–14446 (2014).
Chen, Z. et al. Individual surface-engineered microorganisms as robust Pickering interfacial biocatalysts for resistance-minimized phase-transfer bioconversion. Angew. Chem. Int. Ed. 54, 4904–4908 (2015).
Duan, P. et al. Protection of photosynthetic algae against ultraviolet radiation by one-step CeO2 shellization. Langmuir 33, 2454–2459 (2017).
Kim, B. J., Cho, H., Park, J. H., Mano, J. F. & Choi, I. S. Strategic advances in formation of cell-in-shell structures: from syntheses to applications. Adv. Mater. 30, e1706063 (2018).
Jiang, N. et al. A stable, reusable, and highly active photosynthetic bioreactor by bio-interfacing an individual cyanobacterium with a mesoporous bilayer nanoshell. Small 11, 2003–2010 (2015).
Xiong, W. et al. Alleviation of high light-induced photoinhibition in cyanobacteria by artificially conferred biosilica shells. Chem. Commun. 49, 7525–7527 (2013).
Su, D. et al. Enzyme-modulated anaerobic encapsulation of chlorella cells allows switching from O2 to H2 production. Angew. Chem. Int. Ed. 58, 3992–3995 (2019).
Wang, L. et al. Polydopamine nanocoated whole-cell asymmetric biocatalysts. Chem. Commun. 53, 6617–6620 (2017).
Xiong, W. et al. Silicification-induced cell aggregation for the sustainable production of H2 under aerobic conditions. Angew. Chem. Int. Ed. 54, 11961–11965 (2015).
Guo, L. et al. Engineering Escherichia coli lifespan for enhancing chemical production. Nat. Catal. 3, 307–318 (2020).
Rollig, R., Plikat, C. & Ansorge-Schumacher, M. B. Efficient and selective carboligation with whole-cell biocatalysts in Pickering emulsion. Angew. Chem. Int. Ed. 58, 12960–12963 (2019).
Schrewe, M., Julsing, M. K., Bühler, B. & Schmid, A. Whole-cell biocatalysis for selective and productive C–O functional group introduction and modification. Chem. Soc. Rev. 42, 6346–6377 (2013).
Pera-Titus, M., Leclercq, L., Clacens, J.-M., De Campo, F. & Nardello-Rataj, V. Pickering interfacial catalysis for biphasic systems: from emulsion design to green reactions. Angew. Chem. Int. Ed. 54, 2006–2021 (2015).
Wang, Z., van Oers, M. C. M., Rutjes, F. P. J. T. & van Hest, J. C. M. Polymersome colloidosomes for enzyme catalysis in a biphasic system. Angew. Chem. Int. Ed. 51, 10746–10750 (2012).
Bommarius, A. S. & Paye, M. F. Stabilizing biocatalysts. Chem. Soc. Rev. 42, 6534–6565 (2013).
Stepankova, V. et al. Strategies for stabilization of enzymes in organic solvents. ACS Catal. 3, 2823–2836 (2013).
Thomas, C. R. & Geer, D. Effects of shear on proteins in solution. Biotechnol. Lett. 33, 443–456 (2011).
Wei, L., Zhang, M., Zhang, X., Xin, H. & Yang, H. Pickering emulsion as an efficient platform for enzymatic reactions without stirring. ACS Sustain. Chem. Eng. 4, 6838–6843 (2016).
Crossley, S., Faria, J., Shen, M. & Resasco, D. E. Solid nanoparticles that catalyze biofuel upgrade reactions at the water/oil interface. Science 327, 6 (2010).
Yang, S. H. et al. Mussel-inspired encapsulation and functionalization of individual yeast cells. J. Am. Chem. Soc. 133, 2795–2797 (2011).
Stiefel, P., Schmidt-Emrich, S., Maniura-Weber, K. & Ren, Q. Critical aspects of using bacterial cell viability assays with the fluorophores SYTO9 and propidium iodide. BMC Microbiol 15, 36 (2015).
Kim, J. Y. et al. Cytocompatible polymer grafting from individual living cells by atom-transfer radical polymerization. Angew. Chem. Int. Ed. 55, 15306–15309 (2016).
Coohill, T. P. & Sagripanti, J.-L. Bacterial inactivation by solar ultraviolet radiation compared with sensitivity to 254 nm radiation. Photochem. Photobio. 85, 1043–1052 (2009).
Sun, Z., Glebe, U., Charan, H., Böker, A. & Wu, C. Enzyme–polymer conjugates as robust Pickering interfacial biocatalysts for efficient biotransformations and one-pot cascade reactions. Angew. Chem. Int. Ed. 57, 13810–13814 (2018).
Zhao, Q., Ansorge-Schumacher, M. B., Haag, R. & Wu, C. Living whole-cell catalysis in compartmentalized emulsion. Bioresour. Technol. 295, 122221 (2020).
Zhao, Q., Ansorge-Schumacher, M. B., Haag, R. & Wu, C. Compartmentalized aqueous–organic emulsion for efficient biocatalysis. Chem. Eur. J. 24, 10966–10970 (2018).
Adam, W., Fell, R. T., Stegmann, V. R. & Saha-Möller, C. R. Synthesis of optically active α-hydroxy carbonyl compounds by the catalytic, enantioselective oxidation of silyl enol ethers and ketene acetals with (salen)manganese(III) complexes. J. Am. Chem. Soc. 120, 708–714 (1998).
Foulkes, J. M., Malone, K. J., Coker, V. S., Turner, N. J. & Lloyd, J. R. Engineering a biometallic whole cell catalyst for enantioselective deracemization reactions. ACS Catal. 1, 1589–1594 (2011).
Köhler, V. et al. Synthetic cascades are enabled by combining biocatalysts with artificial metalloenzymes. Nat. Chem. 5, 93–99 (2013).
Litman, Z. C., Wang, Y., Zhao, H. & Hartwig, J. F. Cooperative asymmetric reactions combining photocatalysis and enzymatic catalysis. Nature 560, 355–359 (2018).
Green, D. R., Galluzzi, L. & Kroemer, G. Cell biology. Metabolic control of cell death. Science 345, 1250256 (2014).
Takao, K., Noguchi, K., Hashimoto, Y., Shirahata, A. & Sugita, Y. Synthesis and evaluation of fatty acid amides on the N-oleoylethanolamide-like activation of peroxisome proliferator activated receptor α. Chem. Pharm. Bull. 63, 278–285 (2015).
We thank the financial support from the Independent Research Fund Denmark (DFF) within the framework of the Sapere Aude leader program. We also thank Novo Nordisk Foundation for its generous funding. The use of the HZDR Ion Beam Center TEM facilities and the funding of TEM Talos by the German Federal Ministry of Education and Research (BMBF), Grant No. 03SF0451, in the framework of HEMCP are acknowledged.
The authors declare no competing interests.
Peer review information
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Sun, Z., Hübner, R., Li, J. et al. Artificially sporulated Escherichia coli cells as a robust cell factory for interfacial biocatalysis. Nat Commun 13, 3142 (2022). https://doi.org/10.1038/s41467-022-30915-2