Abstract
Chiral metal complexes show promise as asymmetric catalysts and optical materials. Chiral-at-metal complexes composed of achiral ligands have expanded the versatility and applicability of chiral metal complexes, especially for octahedral and half-sandwich complexes. However, Werner-type tetrahedral complexes with a stereogenic metal centre are rarely used as chiral-at-metal complexes because they are too labile to ensure the absolute configuration of the metal centre. Here we report the asymmetric construction of a tetrahedral chiral-at-zinc complex with high configurational stability, using an unsymmetric tridentate ligand. Coordination/substitution of a chiral auxiliary ligand on zinc followed by crystallisation yields an enantiopure chiral-only-at-zinc complex (> 99% ee). The enantiomer excess remains very high at 99% ee even after heating at 70 °C in benzene for one week. With this configurationally stable zinc complex of the tridentate ligand, the remaining one labile site on the zinc can be used for a highly selective asymmetric oxa-Diels-Alder reaction (98% yield, 87% ee) without substantial racemisation.
Similar content being viewed by others
Introduction
Enantiopure chiral metal complexes are widely used for catalytic1, chiroptical2, medical3 and molecular recognition4 purposes. Common synthetic methods use enantiopure chiral ligands5,6,7 or counterions8 as components. An alternative is to coordinate ligands to a metal atom in a chiral configuration9, which is known as chiral-at-metal complexes10. The latter method is recently gathering attention because the central metal atom can act as a stereocentre as well as a substrate activation centre without other chiral constituents11,12. However, previous examples of enantiopure complexes with metal-centred chirality have focused on octahedral13,14,15,16,17,18,19,20,21,22 and half-sandwich pseudotetrahedral23,24,25 coordination geometries. Although Werner-type tetrahedral metal complexes can have structures similar to carbon centres to which four different substituents can bind, their stereoinversion is generally very fast, making it difficult to maintain long-term enantiopurity26 (Fig. 1a). It has therefore long been a difficult task to construct and utilise Werner-type tetrahedral chiral metal centres without using chiral constituents.
Zinc shows promise as a metal ion capable of forming a tetrahedral coordination structure, as exemplified by zinc enzymes in biological systems. For example, in the active centres of zinc enzymes such as carbonic anhydrase and alcohol dehydrogenase, the flexible coordination structures and Lewis acidity unique to zinc complexes are successfully used27. In these enzymes, hydration and reduction reactions, respectively, occur in the relatively labile fourth coordination site in the chiral catalytic centre where three different amino acid residues are coordinated to the zinc centre. Focusing on the stable chiral structures and functions of such zinc enzymes, we set out to construct a stable zinc-centred chirality using achiral constituents that enables asymmetric catalysis.
In this study, we establish a highly enantioselective synthesis of tetrahedral zinc complexes with long-term stability using an unsymmetric achiral tridentate ligand (Fig. 1b). We also develop a highly selective asymmetric catalytic reaction by utilising the relatively labile coordination site of the obtained optically pure zinc complex and clarify the reaction mechanism.
Results
Ligand design
We have designed an unsymmetric, achiral tridentate ligand for a tetrahedral chiral-at-zinc complex. The fourth coordination site of the zinc complex was postulated as a substrate binding site for asymmetric induction and catalysis. One problem to be solved is the fast inversion of the absolute configuration of the zinc centre, which leads to racemisation. There are two possible mechanisms for this stereoinversion. Firstly, stereoinversion can occur through complete or partial dissociation of the tridentate ligand from the zinc centre followed by reassociation without asymmetric induction (Fig. 2a). Another possible mechanism is the stereoinversion between the two tetrahedral enantiomers through some states in which the tridentate ligand does not dissociate and is flush with the zinc centre (Fig. 2b). In other words, to prevent racemisation of the zinc centre, it is necessary to pay attention to the structure of the ligand and the properties of the solvent to suppress the flattening of the zinc complex structure and the dissociation of the tridentate ligand.
From this perspective, an achiral unsymmetrical tridentate ligand H2L was designed and synthesised for tetrahedral chiral-at-zinc complexes, [ZnLL4] (L4 = an achiral monodentate ligand) (Fig. 1b). The ligand L2− after deprotonation has a dianionic charge and two rigid chelate rings, and suppresses dissociation of the tridentate ligand that promotes racemisation. Even if one end of L2− dissociates, the three donor atoms cannot be in the same plane as the zinc atom due to the steric hindrance and strain, thus preventing stereoinversion caused by partial dissociation or flattening (Supplementary Fig. 1). These two structural factors were expected to allow L2− to maintain and stabilise the absolute configuration of the tetrahedral zinc centre, even in the presence of a labile coordination site.
Asymmetric construction of a tetrahedral chiral zinc centre
To obtain enantiopure chiral substances, enantioselective or diastereoselective synthesis is an effective tool alongside optical resolution techniques such as crystallisation or chromatography. A few excellent examples of asymmetric synthesis of enantiopure chiral octahedral metal complexes have been reported so far using chiral auxiliary ligands28. Inspired by these reports, we developed an asymmetric synthesis of an enantiopure chiral tetrahedral zinc complex using an unsymmetric achiral tridentate ligand L2− and a chiral auxiliary in the following three steps: (i) complexation of tridentate L2− and a source of zinc to prepare a racemic mixture of tetrahedral zinc complex; (ii) asymmetric induction at the zinc centre using an appropriate coordinating chiral auxiliary; (iii) replacement of the chiral auxiliary ligand with an achiral ligand while maintaining the absolute configuration of the zinc centre.
Firstly, ligand H2L was reacted with diethylzinc to obtain a racemic mixture of dimeric complexes, rac-[Zn2L2] (Fig. 3a). The crystal includes (RZn,RZn)-[Zn2L2] and (SZn,SZn)-[Zn2L2] in a 1:1 ratio, as was determined by single-crystal X-ray structure analysis (RZn and SZn denote the absolute configuration of each zinc centre). Figure 3b shows only the portion (RZn,RZn)-[Zn2L2]. In this structure, the zinc centre is bound by the doubly deprotonated tridentate ligand L2− and the sulfonyl oxygen donor of the other L2−, forming a dimer of the four-coordinate zinc complex. That the tetrahedral structure is maintained in solution was supported by 1H nuclear magnetic resonance (NMR) measurements including NOESY in C6D6 (Supplementary Fig. 2). As shown below, this dimer is believed to dissociate into monomers by ligand exchange with an appropriate monodentate ligand.
Secondly, rac-[Zn2L2] dimer was reacted with a chiral auxiliary, (S)-dpp (dpp = α,α-diphenyl-2-pyrrolidinemethanol) (2.5 equiv.), in aprotic C6D6 as the fourth ligand to control the absolute configuration of the zinc centre (Fig. 3a). At the initial stage of this reaction, two diastereomers, (SZn)-[ZnL((S)-dpp)] and (RZn)-[ZnL((S)-dpp)], were generated in a ratio of about 1:1, as demonstrated by 1H and 19F NMR spectroscopy (Fig. 4a, b). Upon heating at 70 °C for 48 h and standing at room temperature for 24 h, the diastereomer ratio gradually changed and finally reached 51:1.
This equilibrium shift involves configurational changes at the zinc centre, although the ligand L2− was designed to slow the configurational isomerisation. To examine the effect of the hydroxy group of (S)-dpp on the stereoinversion, the isomerisation kinetics was compared with (S)-mdp (mdp = 2-(methoxydiphenylmethyl)pyrrolidine) where the hydroxyl group of (S)-dpp is methylated (Fig. 4c). As a result, it was found that (S)-dpp bearing a hydroxy group significantly accelerated the stereoinversion (Fig. 4b). Therefore, the (S)-dpp acts not only as a chiral auxiliary, but also as a promoter of stereoinversion at the zinc centre. The stereoinversion was further accelerated by adding an excess of (S)-dpp (Fig. 4b). As shown below, when the (S)-dpp is replaced by an achiral monodentate ligand and the dissociated (S)-dpp is removed, the absolute configuration of the zinc centre was retained and kept stable for a long time.
The structures of (SZn)-[ZnL((S)-dpp)] in the crystal state and in solution were determined by single-crystal X-ray diffraction (Fig. 3b) and 1H NMR spectroscopy including NOESY (Supplementary Fig. 2), respectively. In the crystal structure, two NH–O and one OH–π hydrogen bonds were found (Fig. 3b and Supplementary Fig. 3). The equilibrium in solution between the diastereomers was biased toward the (SZn) form, most likely because of the hydrogen bonding and steric repulsion observed between (S)-dpp and L2−.
Thirdly, the diastereo-enriched [ZnL((S)-dpp)] ((SZn)-[ZnL((S)-dpp)]:(RZn)-[ZnL((S)-dpp)] = 51:1) was reacted with tBuCN to replace (S)-dpp by achiral tBuCN (Fig. 3a). The product (SZn)-[ZnL(NCtBu)] was isolated by crystallisation in 72% yield (three steps from H2L). The crystal structure of [ZnL(NCtBu)] was confirmed by single-crystal X-ray diffraction (Fig. 3b), and was found to be maintained in solution as shown by 1H NMR spectroscopy including NOESY (Supplementary Fig. 2). The SZn configuration at the zinc centre was confirmed by the anomalous dispersion in single-crystal X-ray diffraction.
The enantiomeric excess (ee) of the crystalline (SZn)-[ZnL(NCtBu)] was determined in C6D6 to be > 99% ee by 19F NMR spectroscopy using a chiral shift reagent, (R)-mts (mts = methyl p-tolyl sulfoxide) (Fig. 5a, b). First, we confirmed that the addition of (R)-mts to rac-[Zn2L2] yields two completely separated signals with a 1:1 integration ratio (Fig. 5a). This experiment validated the accuracy of this method for determining the optical purity of the product. The optical purity of the obtained (SZn)-[ZnL(NCtBu)] was confirmed by the same method, and it was found that the enantiomeric excess was 99% ee or more (Fig. 5b).
The product (SZn)-[ZnL(NCtBu)] has a chiral structure based on a tetrahedral zinc centre. The geometry of the zinc centre of the crystal structure was almost tetrahedral, as shown by the geometry index29 τ4 = 0.85. The ligands L2− and tBuCN are achiral, but four chemically inequivalent nitrogen atoms coordinate to the zinc centre, forming a tetrahedral chiral-at-zinc structure. The Cotton effects of (SZn)-[ZnL(NCtBu)] were also confirmed in its CD spectrum (Supplementary Fig. 4). The complex (RZn)-[ZnL(NCtBu)] synthesised by the same method using (R)-dpp showed the expected mirror-image CD spectrum from that of (SZn)-[ZnL(NCtBu)]. In this way, by combining the designed tridentate ligand L2− and the chiral auxiliary ligand (S)-dpp, a tetrahedral chiral zinc with a single configuration can be constructed with high enantioselectivity.
Configurational stability of the tetrahedral chiral zinc centre
Next, we investigated the configurational stability of the zinc centre using a physically and enantiomerically pure complex, (SZn)-[ZnL(NCtBu)]. Even when (SZn)-[ZnL(NCtBu)] was heated in aprotic C6D6 in a dry N2 atmosphere at 70 °C for one week, the enantiomer excess was maintained as highly as 99% ee (Fig. 5c). This very high stability is in stark contrast to the typical tetrahedral zinc complexes which have been reported to undergo an instantaneous stereoinversion30,31. This result demonstrates the effectiveness of the design of L2− in slowing down stereoinversion, even when the tetrahedral four-coordinate structure has a labile coordination site.
The effect of different solvents on the configurational stability of the zinc centre was also investigated (Supplementary Table 1). For example, in protic iPrOH the stereoinversion was accelerated whereas in aprotic polar solvents (THF, CH2Cl2 and CH3CN), the stereoinversion was only slightly accelerated. The results indicate that (SZn)-[ZnL(NCtBu)] can be used in various aprotic solvents with little loss of enantiopurity.
Catalytic activity of the tetrahedral chiral zinc centre
Finally, to clarify the reactivity of the labile coordination site of (SZn)-[ZnL(NCtBu)], we investigated its catalytic function in asymmetric reactions. The Lewis acidity of this chiral zinc complex was effectively utilised in the asymmetric oxa-Diels–Alder catalytic reaction32,33. Specifically, a reaction of Danishefsky’s diene 1 with aldehyde 2 was performed in the presence of 2 mol% of (SZn)-[ZnL(NCtBu)] (Fig. 6a) at 19 °C for 24 h. After acidic workup, adduct (R)-3 was obtained in 98% yield with 87% ee (Supplementary Fig. 5). However, compound 3 was not produced at all when the reaction was carried out without the zinc catalyst, indicating that the complex (SZn)-[ZnL(NCtBu)] acts as a chiral Lewis acid catalyst.
As a potential candidate of the key intermediate of this catalysis, we synthesised aldehyde–catalyst complex [ZnL(2)], according to the typical mechanism of oxa-Diels–Alder reactions34. A racemate complex rac-[ZnL(2)] was successfully obtained from rac-[Zn2L2] and aldehyde 2. Its crystal and solution structures were determined by single-crystal X-ray diffraction (Fig. 6b) and by 1H NMR spectroscopy including NOESY (Supplementary Fig. 2), respectively. The crystal structure shows that the oriented structure of the substrate 2 bound to the zinc centre is fixed by a CH–O hydrogen bond and a π–π interaction (Supplementary Fig. 3). In this crystal structure, the Si-face of aldehyde 2 in (RZn)-[ZnL(2)] (stereochemically corresponds to (SZn)-[ZnL(NCtBu)]) is blocked by the bulky mesityl group of the ligand (Fig. 6c). Although this complex was obtained under conditions different from those in the catalysis, the high enantioselectivity of the oxa-Diels–Alder reaction can be explained by a mechanism where diene 1 approaches from the Re-face of 2 in complex (RZn)-[ZnL(2)]. This Re-face approach is consistent with the absolute configuration of the product (R)-3, which was determined by single-crystal X-ray diffraction analysis of two derivatives (see Supplementary Methods).
In this scenario, the absolute configuration of the zinc centre during the reaction is maintained despite the catalytic cycle involving ligand exchange. To further support this scenario, 19F NMR measurements of the solution containing the chiral shift reagent (R)-mts and the reaction mixture showed that the enantiomer excess of the zinc catalyst after the reaction was > 99% ee (Supplementary Fig. 6). The labile coordination site of the complex (SZn)-[ZnL(NCtBu)] was therefore shown to be capable of effective and useful enantioselective catalysis.
In summary, a chiral-at-zinc complex has been efficiently synthesised with high enantioselectivity (> 99% ee) by utilising an achiral unsymmetric tridentate ligand and a chiral auxiliary ligand. The tridentate ligand imparts high stability to the zinc complex so that it can maintain enantiopurity as high as 99% ee even after heating at 70 °C for one week. Furthermore, the labile coordination site of this zinc complex has been found to function as the catalytically active centre of a highly enantioselective (87% ee) asymmetric oxa-Diels–Alder reaction. This study demonstrates that Werner-type tetrahedral zinc centres can be utilised as a stable chirality source in the absence of chiral constituents. These findings expand the design concept for simple but versatile chiral metal complexes, and also are of great academic significance in overriding the common knowledge that tetrahedral zinc complexes are labile.
Methods
Chemicals
Solvents and reagents were purchased from Tokyo Chemical Industry Co., Ltd., FUJIFILM Wako Pure Chemical Corporation, KANTO CHEMICAL CO.,INC. and Sigma-Aldrich Japan, and used without further purification unless otherwise noted. C6H6, C6D6, CD2Cl2, tBuCN, hexamethyldisiloxane (HMDSO), 1,2-dichloroethane, tetrahydrofuran (THF) and iPrOH were dehydrated over MS4A. CH3CN was dehydrated over MS3A.
Handling
All the manipulations regarding the zinc complexes were conducted under dry N2 atmospheres using a UNICO UN-650F glove box connected with a Glovebox Japan GBJPWS3 gas purifier, a UNICO UL-1000A glove box connected with a UNICO MT-1000X gas purifier and gas-tight equipment, except for single-crystal X-ray diffraction and workup of catalysis.
NMR
1H, 13C, 19F, 11B and 2D NMR spectra were recorded on a Bruker AVANCE III-500 (500 MHz) spectrometer. Tetramethylsilane (TMS) was used as an internal standard (δ 0 ppm) for the 1H and 13C NMR measurements when CDCl3 was used as a solvent. A residual solvent signal was used for calibration of the 1H NMR measurement when C6D6 (δ 7.16 ppm), CD3CN (δ 1.94 ppm) or CD2Cl2 (δ 5.32 ppm) was used as a solvent. No corrections were conducted for 19F and 11B NMR measurement. Abbreviations: s, singlet; d, doublet; t, triplet; br, broad; m, multiplet. For the determination of the enantiomeric excess, high numbers of scans and data points were used.
ESI-MS
ESI-MS data were recorded on a Micromass LCT Premier XE ESI-TOF mass spectrometer. The experimental conditions were as follows: desolvation temperature, 150 °C; source temperature, 80 °C.
Elemental analyses
Elemental analyses (C, N, H) were conducted in the Microanalytical Laboratory, Department of Chemistry, School of Science, the University of Tokyo using a Vario MICRO Cube elemental analyser with addition of MgO.
Single-crystal X-ray diffraction
Single-crystal X-ray diffraction analyses were performed using a Rigaku XtaLAB PRO MM007DW PILATUS diffractometer, and obtained data were processed by using CrysAlisPro 1.171.39.7e (Rigaku OD, 2015) software and analysed by Olex2 1.2.10 (OlexSys Ltd., 2018) software35, using SHELXL-2017/1 software36. The crystals of the zinc complexes were handled in open air quickly before they were hydrolysed. For the details of single-crystal X-ray diffraction analyses of each compound, see the Supplementary Methods.
CD
CD spectra were recorded on a JASCO J-820 circular dichroism spectrometer. The experimental conditions were as follows: band width, 1 nm; response, 0.5 s; data acquisition intervals, 0.5 nm; scanning rate, 100 nm/min; number of scans, 4.
HPLC
HPLC data were collected on a JASCO MD-4010 photo diode array detector connected with PU-4185-Binary binary RHPLC semi-micro pump and CO-4060 column oven. The experimental conditions were as follows: slit width, 4 nm; data acquisition intervals, 4 nm; data integration width, 3 nm; sampling rate, 5 points/s.
The synthetic procedures, characterisation data and other reaction procedures are described in the Supplementary Methods.
Data availability
Single-crystal X-ray diffraction data are available free of charge from the Cambridge Crystallographic Data Centre (https://www.ccdc.cam.ac.uk/data_request/cif) under reference numbers CCDC-1988762 (rac-[Zn2L2]), CCDC-1988761 ((SZn)-[ZnL((S)-dpp)]), CCDC-1988763 ((SZn)-[ZnL(NCtBu)]), CCDC-1988760 (rac-[ZnL(2)]), CCDC-2035788 ((RZn)-[ZnL((R)-3)]) and CCDC-2033429 ((R,R)-3′). All other data generated or analysed during this study are available from the authors.
References
Noyori, R. Chiral metal complexes as discriminating molecular catalysts. Science 248, 1194–1199 (1990).
Zinna, F. & Di Bari, L. Lanthanide circularly polarized luminescence: bases and applications. Chirality 27, 1–13 (2015).
Wang, Y., Huang, H., Zhang, Q. & Zhang, P. Chirality in metal-based anticancer agents. Dalton Trans. 47, 4017–4026 (2018).
Chin, J., Lee, S. S., Lee, K. J., Park, S. & Kim, D. H. A metal complex that binds α-amino acids with high and predictable stereospecificity. Nature 401, 254–257 (1999).
Crassous, J. Transfer of chirality from ligands to metal centers: recent examples. Chem. Commun. 48, 9684–9692 (2012).
Knof, U. & von Zelewsky, A. Predetermined chirality at metal centers. Angew. Chem. Int. Ed. 38, 302–322 (1999).
Liu, X., Zheng, H., Xia, Y., Lin, L. & Feng, X. Asymmetric cycloaddition and cyclization reactions catalyzed by chiral N,N′-dioxide-metal complexes. Acc. Chem. Res. 50, 2621–2631 (2017).
Lacour, J. & Moraleda, D. Chiral anion-mediated asymmetric ion pairing chemistry. Chem. Commun. 45, 7073–7089 (2009).
Constable, E. C. Stereogenic metal centres - from Werner to supramolecular chemistry. Chem. Soc. Rev. 42, 1637–1651 (2013).
Bauer, E. B. Chiral-at-metal complexes and their catalytic applications in organic synthesis. Chem. Soc. Rev. 41, 3153–3167 (2012).
Zhang, L. & Meggers, E. Stereogenic-only-at-metal asymmetric catalysts. Chem. Asian J. 12, 2335–2342 (2017).
Cao, Z.-Y., Brittain, W. D. G., Fossey, J. S. & Zhou, F. Recent advances in the use of chiral metal complexes with achiral ligands for application in asymmetric catalysis. Catal. Sci. Technol. 5, 3441–3451 (2015).
Zhang, L. & Meggers, E. Steering asymmetric Lewis acid catalysis exclusively with octahedral metal-centered chirality. Acc. Chem. Res. 50, 320–330 (2017).
Werner, A. Zur kenntnis des asymmetrischen Kobaltatoms. I. Ber. Dtsch. Chem. Ges. 44, 1887–1898 (1911).
Chavarot, M. et al. “Chiral-at-metal” octahedral ruthenium(II) complexes with achiral ligands: a new type of enantioselective catalyst. Inorg. Chem. 42, 4810–4816 (2003).
Chin, J., Chong, Y. S., Bobb, R., Studnicki, L., Hong, J. I. Imprinting and locking chiral memory for stereoselective catalysis. Chem. Commun. 43, 120–122 (2007).
Ganzmann, C. & Gladysz, J. A. Phase transfer of enantiopure werner cations into organic solvents: an overlooked family of chiral hydrogen bond donors for enantioselective catalysis. Chem. Eur. J. 14, 5397–5400 (2008).
Blanck, S. et al. The art of filling protein pockets efficiently with octahedral metal complexes. Angew. Chem. Int. Ed. 51, 5244–5246 (2012).
Huo, H. et al. Asymmetric photoredox transition-metal catalysis activated by visible light. Nature 515, 100–103 (2014).
Hartung, J., Dornan, P. K. & Grubbs, R. H. Enantioselective olefin metathesis with cyclometalated ruthenium complexes. J. Am. Chem. Soc. 136, 13029–13037 (2014).
Yao, S. Y., Chen, X. Y., Ou, Y. L. & Ye, B. H. Chiral recognition and dynamic thermodynamic resolution of sulfoxides by chiral iridium(III) complexes. Inorg. Chem. 56, 878–885 (2017).
Carmona, M. et al. Metal as source of chirality in octahedral complexes with tripodal tetradentate ligands. J. Am. Chem. Soc. 140, 912–915 (2018).
Ganter, C. Chiral organometallic half-sandwich complexes with defined metal configuration. Chem. Soc. Rev. 32, 130–138 (2003).
Brunner, H. Stability of the metal configuration in chiral-at-metal half-sandwich compounds. Eur. J. Inorg. Chem. 2001, 905–912 (2001).
Gladysz, J. A. & Boone, B. J. Chiral recognition in π complexes of alkenes, aldehydes, and ketones with transition metal lewis acids; development of a general model for enantioface binding selectivities. Angew. Chem. Int. Ed. Engl. 36, 550–583 (1997).
Desvergnes-Breuil, V., Hebbe, V., Dietrich-Buchecker, C., Sauvage, J. P. & Lacour, J. NMR evaluation of the configurational stability of Cu(I) complexes. Inorg. Chem. 42, 255–257 (2003).
Coleman, J. E. Zinc proteins: enzymes, storage proteins, transcription factors, and replication proteins. Annu. Rev. Biochem. 61, 897–946 (1992).
Meggers, E. Chiral auxiliaries as emerging tools for the asymmetric synthesis of octahedral metal complexes. Chem. Eur. J. 16, 752–758 (2010).
Yang, L., Powell, D. R., Houser, R. P. Structural variation in copper(I) complexes with pyridylmethylamide ligands: structural analysis with a new four-coordinate geometry index, τ4. Dalton Trans. 36, 955–964 (2007).
Chamayou, A. C. et al. Chirality and diastereoselection of Δ/Λ-configured tetrahedral zinc complexes through enantiopure Schiff base complexes: combined vibrational circular dichroism, density functional theory, 1H NMR, and X-ray structural studies. Inorg. Chem. 50, 11363–11374 (2011).
Enamullah, M. et al. Synthesis, X-ray, and spectroscopic study of dissymmetric tetrahedral zinc(II) complexes from chiral Schiff base naphthaldiminate ligands with apparent exception to the ecd exciton chirality. Inorg. Chem. 55, 6449–6464 (2016).
Pellissier, H. Asymmetric hetero-Diels–Alder reactions of carbonyl compounds. Tetrahedron 65, 2839–2877 (2009).
Maruoka, K., Itoh, T., Shirasaka, T. & Yamamoto, H. Asymmetric hetero-Diels-Alder reaction catalyzed by a chiral organoaluminum reagent. J. Am. Chem. Soc. 110, 310–312 (1988).
Jorgensen, K. A. Catalytic asymmetric hetero-Diels-Alder reactions of carbonyl compounds and imines. Angew. Chem. Int. Ed. 39, 3558–3588 (2000).
Dolomanov, O. V., Bourhis, L. J., Gildea, R. J., Howard, J. A. K. & Puschmann, H. OLEX2: a complete structure solution, refinement and analysis program. J. Appl. Crystallogr. 42, 339–341 (2009).
Sheldrick, G. M. Crystal structure refinement with SHELXL. Acta Crystallogr., Sect. C 71, 3–8 (2015).
Acknowledgements
We acknowledge Dr. Hiroyasu Sato (Rigaku Corporation) for refinement of the single-crystal X-ray diffraction data of (R,R)-3′. This research was supported by JSPS KAKENHI Grant No. JP16H06509 (Coordination Asymmetry) to M.S., Grant No. JP18K05138 to H.U. and Grant No. JP17J06579 (Grant-in-Aid for JSPS Fellows) to K.E.
Author information
Authors and Affiliations
Contributions
K.E. designed this work, performed experiments, analysed data and prepared the manuscript. Y.L. performed experiments and analysed data. H.U. designed this work, directed the research and prepared the manuscript. K.N. directed experiments. M.S. proposed and supervised this study and prepared the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks Ryan VanderLinden and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Endo, K., Liu, Y., Ube, H. et al. Asymmetric construction of tetrahedral chiral zinc with high configurational stability and catalytic activity. Nat Commun 11, 6263 (2020). https://doi.org/10.1038/s41467-020-20074-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-20074-7
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.