Abstract
The nonthermal nature of selfpropelling colloids offers new insights into nonequilibrium physics. The central mathematical model to describe their trajectories is active Brownian motion, where a particle moves with a constant speed, while randomly changing direction due to rotational diffusion. While several feedback strategies exist to achieve positiondependent velocity, the possibility of spatial and temporal control over rotational diffusion, which is inherently dictated by thermal fluctuations, remains untapped. Here, we decouple rotational diffusion from thermal fluctuations. Using external magnetic fields and discretetime feedback loops, we tune the rotational diffusivity of active colloids above and below its thermal value at will and explore a rich range of phenomena including anomalous diffusion, directed transport, and localization. These findings add a new dimension to the control of active matter, with implications for a broad range of disciplines, from optimal transport to smart materials.
Introduction
The behavior of selfpropelling colloidal particles sheds light on farfromequilibrium physics and offers tantalizing opportunities to perform tasks beyond the reach of other micro and nanoscale systems^{1}. Many of these functions are inspired by the striking similarity that synthetic active matter exhibits with living systems such as motile bacteria. This analogy therefore also provides an ideal opportunity to understand the motion and (self)organization of living systems through synthetic models^{2}. The fundamental mathematical description of how active colloids move is given by active Brownian motion^{1}: a microscopic particle of radius R in a fluid of viscosity η moves with constant speed v, while its orientation diffuses at a rate set by the rotational diffusivity D_{R} = (k_{B}T)/(8πηR^{3}), with k_{B}T being the characteristic thermal energy at absolute temperature T and k_{B} the Boltzmann constant. This minimal model has been successfully employed to describe a wealth of phenomena, from the motion of active particles in complex structures^{3} to the optimization of search strategies^{4}.
Recently, there has been a growing interest in pushing the control of synthetic active matter beyond the standard active Brownian particle (ABP) model to mimic more complex behaviors, including directed transport and pattern formation. These phenomena typically arise when the particle velocity or the environmental fluctuations vary in space and time. For example, a positiondependent translational diffusivity has been proposed as a fundamental biological mechanism leading to anomalous diffusion and localization of biomolecules in cellular membranes^{5}, while the temporal control of random walks enables the emergence of collective motion in active colloids^{6}. The effect of a positiondependent velocity has also been investigated as a means to control the organization and the area explored by active particles (artificial and biological) as well as their interactions^{7,8,9,10,11,12,13,14,15,16}. Beyond their fundamental relevance, these mechanisms can also be exploited for applications ranging from environmental remediation to targeted drug delivery^{1}.
Because translation and rotation in ABPs are coupled, introducing a feedback between rotational dynamics and position also provides a means to control active Brownian motion. Biological swimmers, such as chemotactic bacteria^{17}, are in fact known to tune their rotational dynamics to climb up or down chemical gradients in order to localize food sources or to escape harmful chemicals. However, while biological swimmers can do so by varying their reorientation frequency (or tumbling rate)^{18}, which is an internal degree of freedom, the rotational dynamics of a synthetic active particle is usually dictated by thermal fluctuations.
Here, we control the rotational diffusivity of individual ABPs by decoupling the amplitude of the rotational fluctuations from the thermal bath. Through randomlyoriented magnetic fields and a discretetime feedback loop, we spatially and temporally modulate the effective rotational temperature, above and below the environmental temperature. This allows us to study the effect of a positiondependent rotational diffusivity on the statistics of active Brownian motion. In analogy with biological and artificial sensoractuator systems that rely on temporal sampling^{17,19}, we also consider that the feedback between D_{R} and the particle’s position is not instantaneous, but mediated by a discrete sampling of position that results in a finite sensorial delay. We find that periodic spacetime modulations of the rotational dynamics bring about a broad range of exotic phenomena, ranging from anomalous diffusion reminiscent of glassy dynamics to directed transport and localization. We support our results with numerical simulations, which also indicate new directions for future developments.
Results
Controlling rotational dynamics
Our model ABPs selfpropel due to inducedcharge electrophoresis^{20,21,22}. They consist of 4 μmdiameter silica Janus colloids, halfcoated with a 120 nmthick nickel cap, which is magnetized in the direction perpendicular to the Janus boundary (see inset in Fig. 1a). In this way, the propulsion’s direction dictated by the compositional asymmetry is aligned with the caps’ magnetic moment and can be externally controlled by a magnetic field. We let the particles sediment at the bottom of a liquid cell enclosed by two planar transparent electrodes, which are separated by a vertical gap h = 120 μm, and record the colloids’ position and cap orientation at a frame rate of 10 fps by video microscopy (see Methods for more details). The colloids swim over the bottom substrate due to locally unbalanced electrohydrodynamic flows generated by a spatially uniform 1 kHz AC electric field applied across the electrodes (Fig. 1a). The swimming velocity v is proportional to the square of the electric field \(\propto {({V}_{{\rm{pp}}}/h)}^{2}\), where V_{pp} is the peaktopeak voltage, which is varied in the range 1–10 V.
We control the orientation angle θ of the colloids’ cap (see microscopy image in Fig. 1a) by two pairs of independent Helmholtz coils generating spatially uniform magnetic fields of any inplane orientation (Fig. 1a, Supplementary Fig. 1, and Supplementary Movie 1). In contrast to previous works, where magnetic fields are used to remotecontrol active colloids^{23,24,25,26,27}, we randomize the direction of the magnetic field to endow the colloids with an externally controlled rotational diffusivity, which is decoupled from the thermal bath and the propulsion scheme (Supplementary Movie 2). We vary the orientation of the magnetic field at f = 1 kHz by random angular displacements Δθ drawn from a Gaussian distribution with zero mean and variance σ^{2} = 2D_{R}/f, where D_{R} is the imposed rotational diffusivity. Fig. 1b shows the orientation angle of the magnetic field as a function of time for values of imposed D_{R} ranging from 10^{−2} to 10 rad^{2} s^{−1}. The corresponding distributions of the particles’ angular displacements G(Δθ, Δt), measured from the cap orientation, attest that θ and the direction of the magnetic field diffuse according to the same Gaussian process (Fig. 1c). By letting θ diffuse over the entire 2π range, we can therefore enforce effective values of D_{R} that are above and below the thermal rotational diffusivity \({D}_{{\rm{R}}}^{{\rm{th}}}\) (1.4 × 10^{−2} rad^{2} s^{−1} at room temperature). In particular, we can achieve rotational dynamics that are orders of magnitude faster than what the thermal bath would otherwise dictate (rotational cooling is also shown in the SI for 2 μmdiameter colloids in Supplementary Figs. 2 and 3).
External, independent control on D_{R} and v enables us to adjust the persistence of particle trajectories in realtime. For example, as demonstrated in Fig. 1d, we can gradually increase the propensity of an ABP to move along straight paths by decreasing D_{R} over time in a stepwise fashion from 10 to 10^{−1} rad^{2} s^{−1}, while keeping v constant (Supplementary Movie 3, Supplementary Fig. 4 and Supplementary Movie 4 show the complementary case in which D_{R} is kept constant and v is varied in a stepwise fashion. See also Supplementary Supplementary Fig. 2 and Supplementary Fig. 3 for 2 μm colloids). An analysis of the mean squared displacements (MSD), calculated for each segment at a fixed D_{R} (Fig. 1e), shows that the timescale at which the ABP’s motion goes from being ballistic to being diffusive is proportional to \(\sim\! {D}_{{\rm{R}}}^{1}\), as expected. As a result, the MSD at long times is larger for lower values of D_{R}, suggesting the possibility of controlling the area explored by an ABP by varying D_{R} on demand. By systematically varying the imposed D_{R} while fixing the AC voltage, and thus v, we can extract both D_{R} and v from the MSD to calculate the persistence length as \({L}_{{\rm{P}}}=v{D}_{{\rm{R}}}^{1}\). Fig. 1f and its inset show that L_{P} can be varied over a wide range of values, displaying the expected linear scaling on both control parameters. These data thus attest to our ability to engineer the motion of ABPs by independently controlling v and D_{R} using electric and magnetic fields.
A feedback loop for positiondependent rotational dynamics
To study the impact of spacetime modulations of the rotational dynamics on the statistics of active Brownian motion, we implemented a discretetime feedback loop that updates D_{R} based on the ABP’s position r(t) (Fig. 2a, Methods, and Supplementary Figs. 5 and 6). Similarly to the case of the noninstantaneous response of motile microorganisms to environmental cues^{17}, we update D_{R} at regular intervals based on the past ABP’s position r(t − τ), where t = nτ, τ is the sampling period and n is the number of samples. This is realized in the experiments by holding D_{R} constant between consecutive sampling periods, and in the Langevin dynamics simulations by letting the rotational friction vary according to a zeroorder hold (ZOH) model^{19}, as described in the Methods section (see Fig. 2a). Moreover, in analogy with Brownian motion in periodic potentials, which is a paradigmatic model for the description of anomalous diffusion^{28,29,30,31}, here we let D_{R} vary according to a checkerboard pattern of alternating square regions of size L. In each square, D_{R} takes on either a high (\({D}_{{\rm{R}}}^{{\rm{H}}}\)) or a low (\({D}_{{\rm{R}}}^{{\rm{L}}}\)) value (Fig. 2b). Specifically, we consider scenarios where \({D}_{{\rm{R}}}^{{\rm{H}}}=10\) rad^{2} s^{−1}, \({D}_{{\rm{R}}}^{{\rm{L}}}=0.01\) rad^{2} s^{−1}, and L/v such that \(\frac{1}{{D}_{{\rm{R}}}^{{\rm{L}}}}> \frac{L}{v}> > \frac{1}{{D}_{{\rm{R}}}^{{\rm{H}}}}\) (Fig. 2c, d and Supplementary Movie 5 and Supplementary Fig. 7). These choices imply that the motion is predominantly diffusive in one region and ballistic in the other, with two wellseparated relaxation timescales.
Given the existence of multiple parameters that affect the dynamics and the spatial organization of the ABPs, in the following subsections we examine them, and highlight their main contributions, separately. We begin by determining the role of the characteristic timescale L/v and continue with the effect of the sampling period τ, before concluding with an analysis on particle localization.
NonGaussianity: L/v and exponential tails
We find that our feedback scheme coupled with modulations of D_{R} brings about different types of anomalous diffusion at different time and length scales, depending on the sampling period τ and the timescale L/v.
We begin by examining the statistics of particle motion for nonzero but small sampling periods τ << L/v. In this regime, while the trajectories within each region are either ballistic or diffusive (Fig. 2c–d), the overall dynamics presents unique features. The distribution of onedimensional displacements, rescaled by L, G(∣x∣/L, Δt) (Fig. 3a–d) presents different types of nonGaussianity at different lag times Δt depending on the ratio Δt(L/v)^{−1}. We quantify the departure from Gaussian behavior in terms of the excess kurtosis (Fig. 3e): \(\gamma =\frac{\langle {x}^{4}\rangle }{{\langle {x}^{2}\rangle }^{2}}3\), where γ = 0 for a normal distribution. For Δt << L/v, G(∣x∣/L, Δt) is broader and flatter than a normal distribution (γ < 0), which is consistent with the broadening of G(x, Δt) reported for ABPs at intermediate timescales, when the motion is dominated by ballistic segments^{32}. However, as Δt approaches L/v, G(∣x∣/L, Δt) develops into a leptokurtic distribution (γ > 0) characterized by a Gaussian peak at small ∣x∣ followed by an exponential tail up to ∣x∣ ≃ L, after which it rapidly decays.
Exponential tails in G(x, Δt) have already been observed in glassy systems and for the diffusion of colloids in macromolecular environments^{33,34,35}. They are often explained in terms of dynamic heterogeneity, which is the coexistence of faster and slower particles, which explains their appearance also in our system. At timescales Δt ≃ L/v, we also have two distinct populations of particles, which travel over very different length scales depending on where they reside on the checkerboard: diffusive in \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions and ballistic in \({D}_{{\rm{R}}}^{{\rm{L}}}\)regions. Because \(\Delta t\simeq L/v\;> > \;{D}_{{\rm{R}}}^{{\rm{H}}}\), ABPs in \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions are effectively diffusive, with a \({D}_{{\rm{e}}ff}\simeq {v}^{2}/{D}_{{\rm{R}}}^{{\rm{H}}}\)^{1}, and thus their displacements are normally distributed. They are responsible for the Gaussian peak, and travel distances much smaller than L. Conversely, ABPs in \({D}_{{\rm{R}}}^{{\rm{L}}}\)regions move in a ballistic fashion because \(\Delta t\simeq L/v\;<<\;1/{D}_{{\rm{R}}}^{{\rm{L}}}\), and thus their displacements scale as vΔt, which are of order L. Interestingly, while dynamic heterogeneity in glassy colloidal systems arises from hindered translational diffusion due to steric interactions with other particles^{36}, here it is the result of a spatially heterogeneous rotational dynamics. As we will show later, the parallel with glassy systems goes even further.
As we examine dynamics at longer Δt, the excess kurtosis γ attains a positive maximum at Δt ≃ L/v (Fig. 3e and Fig. 4a–b) and later decays to zero, indicating that Gaussian statistics is eventually recovered at long times, as expected. Interestingly, the MSD exhibits a superdiffusive scaling ~Δt^{1.7} up to the same critical timescale, after which the diffusive regime (~Δt^{1}) is gradually recovered in the limit of long time scales (see Fig. 3f). This in stark contrast to the dynamics of ABPs with constant D_{R}. In the latter case, γ is negative at intermediate timescales and zero on short and long timescales, and a transition from a ballistic (MSD ~ t^{2}) to a diffusive (MSD ~ t^{1}) scaling of the MSD is found at Δt ≃ 1/D_{R}^{32}.
Finally, at a given τ << L/v, the timescale L/v dictates not only the Δt at which the maximum degree of nonGaussianity is attained, but also its extent (Fig. 4a, b). This is again a direct consequence of the motion being the combination of distinct ballistic and diffusive segments. The excess kurtosis γ grows with Δt because the extent of the exponential tail grows faster with Δt (~Δt) than the broadness of the Gaussian peak (\(\sim\!\sqrt{\Delta t}\)). Given that ABPs can travel in a ballistic fashion only up to ~L, the tail of G(∣x∣/L, Δt), and thus γ, keeps growing up to Δt ~ L/v. Hence, the greater L/v, the greater the maximum γ, which is correspondingly attained at larger Δt. It is worth noting that, in the limiting case of small \(L/v\;\lesssim\; 1/{D}_{{\rm{R}}}^{{\rm{H}}}\), an exponential tail cannot develop and as a result γ remains negative, approaching zero in the limit of long times, as in the case of ABPs with constant D_{R} (Fig. 4a).
NonGaussianity: τ and subdiffusion
The sampling period τ has a qualitative impact on the statistics of motion depending on its value relative to the timescale L/v (Fig. 4c–h). In particular, we identify three regimes: τ = 0, which corresponds to an instantaneous update of D_{R} based on the ABP’s position, τ < L/v and τ > L/v.
For τ = 0 (Fig. 4c, black circles and Supplementary Fig. 8) γ attains multiple local maxima at Δt(L/v)^{−1} = 1, 3, and 5, with the global maximum being at Δt(L/v)^{−1} = 3. Such maxima in γ also mark changes in the scaling of the MSD (Fig. 4e), which exhibits a superdiffusive scaling ~Δt^{1.7} up to Δt ≃ L/v, after which it starts to saturate and attain a subdiffusive scaling (MSD ~ Δt^{a}, a < 1) up to Δt ≃ 3–5L/v, with higher L/v leading to smaller a. For Δt >> L/v, the MSD eventually recovers the diffusive scaling (a = 1).
The emergence of subdiffusion reinforces the previously mentioned analogy with glassy dynamics. Nonetheless, in our system, there is no physical caging by neighboring particles^{37}. Subdiffusion is instead the result of an “effective dynamical caging”, arising from the randomization of the direction of motion of ballistic ABPs as these enter \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions. In fact, up to Δt ≃ L/v, the MSD is dominated by ballistic segments of length ~vΔt in \({D}_{{\rm{R}}}^{{\rm{L}}}\)regions. Conversely, over the same timescale, diffusive ABPs in \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions only travel comparatively negligible distances \(\sim\! v\sqrt{\Delta t/{D}_{{\rm{R}}}^{{\rm{H}}}}\). However, over timescales ≳L/v, ballistic ABPs cannot travel distances greater than ≃L without crossing into a \({D}_{{\rm{R}}}^{{\rm{H}}}\)region. As they do so, there is a finite probability that they diffuse back and cross the \({D}_{{\rm{R}}}^{{\rm{L}}}\)region from which they came in the opposite direction (Supplementary Movies 6 and 7). Such reflection events give virtually null displacements over timescales up to ~2L/v, the time ballistic ABPs take to cross a \({D}_{{\rm{R}}}^{{\rm{L}}}\)region and travel back. The MSD then grows only as \(\simeq\! {v}^{2}/{D}_{{\rm{R}}}^{{\rm{H}}}\Delta t\) for those particles that cross a \({D}_{{\rm{R}}}^{{\rm{L}}}\)region an odd number of times and remain in a \({D}_{{\rm{R}}}^{{\rm{H}}}\)region. Finally, such a dynamical caging, and the subsequent subdiffusive motion, become less prominent with decreasing L/v, as the difference between diffusive and ballistic displacements diminishes (Fig. 4e).
Moving to nonzero values of τ brings about qualitative changes to the characteristics of γ depending on whether τ < L/v or τ > L/v. Up to τ ~ L/v, higher values of τ translate into higher values of γ, into the increased prominence of the maximum at Δt ≃ L/v, and into the gradual disappearance of local minima (Fig. 4c). Because nonzero values of τ introduce a finite delay in the update of the rotational dynamics, ballistic ABPs can penetrate into \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions up to lengths ~v(2τ) before adjusting their rotational dynamics (see Fig. 2a). This not only increases the effective distance that ABPs can travel in a ballistic fashion, but can also allow them to cross entire regions without adjusting their rotational dynamics. The increase in the maximum value of γ with increasing values of τ is therefore due to a larger disparity between the relative contributions of ballistic and diffusive displacements.
Increasing τ beyond ≃L/v leads to the gradual decrease of γ across intermediate timescales and the disappearance of a maximum in the limit of τ ≫ L/v (Fig. 4d). For τ > L/v, the modulations of the rotational dynamics start to depart considerably from the inherent periodicity of the checkerboard pattern. In the limit of large τ, the rotational dynamics of the ABPs is determined by their initial position rather than the region over which they move. This implies the existence, at all times, of two different populations of particles moving in an either ballistic or diffusive fashion, whose D_{R} remains constant for a period of time equal to τ. In this case, the overall dynamics is the mere superposition of the dynamics of ABPs with different D_{R}. Therefore, in the limit of large τ, γ does not present a maximum and remains negative or close to zero (Fig. 4d).
Values of τ > 0 also lead to the disappearance of subdiffusion at Δt ≃ L/v (Fig. 4f–h). Nonetheless, the MSD still displays a crossover between a superdiffusive and a diffusive scaling on short and long timescales, respectively. The disappearance of subdiffusion is again due to the fact that a finite τ allows ballistic ABPs to penetrate into \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions up to greater lengths before updating their D_{R}. This fact not only minimizes the probability that ABPs diffuse back into the \({D}_{{\rm{R}}}^{{\rm{L}}}\)region from which they entered, but also increases the chances that ballistic ABPs cross entire \({D}_{R}^{H}\)regions without updating their D_{R}, thus contributing to higher MSDs. For analogous reasons, increasing τ also causes the superdiffusivetodiffusive transition to take place at Δt > L/v because ballistic ABPs can travel distances greater than L.
Localization
While a positiondependent rotational dynamics alone cannot sustain pattern formation^{38,39}, the finite sensorial delay introduced by the sampling (τ > 0) in the feedback loop leads to the localization of ABPs in \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions (Fig. 5). Interestingly, the degree of localization is a nonmonotonic function of τ(L/v)^{−1}. For instantaneous updates of D_{R} (τ = 0), the timeaveraged steadystate spatial distribution ρ(x, y) is homogeneous, with no manifestations of the underlying D_{R} pattern (Fig. 5a, numerical simulations). As τ is increased, ρ(x, y) increases in \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions at the expense of \({D}_{{\rm{R}}}^{{\rm{L}}}\)regions up to a maximum degree for a critical τ ≃ 0.1−0.3L/v, before returning to a homogeneous distribution in the limit of large τ(L/v)^{−1} (Fig. 5a).
We further quantify the degree of departure from the homogeneous distribution by studying the evolution of the ratio between the simulated average ρ(x, y) in \({D}_{{\rm{R}}}^{{\rm{H}}}\) and \({D}_{{\rm{R}}}^{{\rm{L}}}\)regions: ρ^{H} and ρ^{L}, respectively (Fig. 5b, c). In agreement with the density maps shown in Fig. 5a, the ρ^{H}/ρ^{L} ratio is 1 in the limit of small or large τ and presents a maximum at intermediate values of τ (Fig. 5b). In particular, the maximum ρ^{H}/ρ^{L} ratio is a linearly increasing function of L/v (Fig. 5c).
The existence of a maximum degree of localization and its dependence with L/v can be explained with a simple transport argument based on the dynamic asymmetry introduced by finite values of τ. As previously mentioned, ballistic ABPs can in fact penetrate into \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions up to lengths ≃v(2τ) before updating their D_{R}, whereas diffusive ABPs keep diffusing up to lengths \(\sim\! v\sqrt{{D}_{{\rm{R}}}^{1}\tau }\) in between updates. The deeper ballistic ABPs can penetrate into diffusive regions, the longer it takes them to diffuse out. Therefore, nonzero values of τ imply that, overall, particles end up spending more time in \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions. This picture is in qualitative agreement with the higher degree of localization in the center of the \({D}_{{\rm{R}}}^{{\rm{H}}}\)regions for τ ≃ 0.3L/v (Fig. 5a).
More quantitatively, because at steady state the net flux between regions must be zero, we can write:
where T^{H} and T^{L} are the average residence times of the ABPs in \({D}_{{\rm{R}}}^{{\rm{H}}}\) and \({D}_{{\rm{R}}}^{{\rm{L}}}\)regions, respectively. Therefore, \({\rm{m}}ax\left({\rho }^{{\rm{H}}}/{\rho }^{{\rm{L}}}\right)\) is equal to \(\max \left({T}^{{\rm{H}}}/{T}^{{\rm{L}}}\right)\). For 0 < τ << L/v, we expect T^{H} and T^{L} to scale as ~(L/v)^{2} and ~L/v, respectively, because the residence time in a \({D}_{{\rm{R}}}^{{\rm{H}}}\)region depends on the time that an ABP takes to penetrate into it (~L/v) and to diffuse out of it (\(\sim \frac{{L}^{2}}{2{v}^{2}/{D}_{{\rm{R}}}^{{\rm{H}}}}\)). Hence, the maximum of the ratio ρ^{H}/ρ^{L} = T^{H}/T^{L} scales linearly with L/v, as shown in Fig. 5c.
The different scaling of T^{H} and T^{L} is also confirmed by the experimental and simulated residence time distributions at different L/v (Fig. 5d–e). In particular, the distributions of T^{H} and T^{L} collapse onto the same master curves, when rescaled by \(\frac{{L}^{2}}{2{v}^{2}/{D}_{{\rm{R}}}^{{\rm{H}}}}\) and L/v, respectively, and quickly drop to zero for rescaled values of T^{H} and T^{L} greater than 1. Moreover, by renormalizing the ρ^{H}/ρ^{L} ratio by its respective maximum for a given L/v, and plotting it as a function of τ(L/v)^{−1}, we find that both simulated and experimental data collapse onto a single master curve (Fig. 5f).
Finally, in the limit of τ > L/v the degree of localization starts to drop because at such large sampling periods the rotational dynamics is decoupled from the inherent periodicity of the underlying checkerboard pattern. This crossover can be viewed in terms of the Nyquist–Shannon’s theorem^{19}. When τ ~ L/v, the frequency at which the ABPs sample their environment is comparable to the highest frequency at which the ABPs can cross a region of the checkerboard pattern. This means that for τ > L/v the ABPs cannot sense changes of D_{R} happening on a length scale L. At all times, the ABPs will retain a given D_{R} for a period equal to the sampling period. This leads to two different populations moving in an either ballistic or diffusive fashion depending on their respective initial positions, which are updated every τ.
Interestingly, for τ > L/v, the disconnect between the ABP’s sampling resolution and the spatial periodicity of the underlying pattern brings about a degree of localization that oscillates over time (Fig. 6). Nonetheless, such oscillations are damped for τ >> L/v due to lingering correlations of particle motion based on past positions introduced by the delay component in the feedback loop. By removing the delay, while retaining the discrete sampling, such that D_{R} is updated every t = nτ according to the ABP’s current position r(t) rather than the past one r(t − τ), we can obtain instead persistent oscillations with a period equal to τ (Fig. 6a, b).
Discussion
Our findings illustrate that engineering the feedback between the internal dynamics (e.g., D_{R}, v) and the state (r(t)) of ABPs allows tailoring their response, both in terms of the statistics of motion at the singleparticle level and in relation to their global spatiotemporal organization. In particular, we show that the response is defined by the balance of timescales in the system, the ones characteristic of active Brownian motion. i.e., set by v and D_{R}, and the externally imposed ones, set by the modulation of dynamical landscapes and the feedback clock. Our experiments show that, by decoupling rotational fluctuations from the thermal bath, we now have full control on each of these timescales, which enables us to begin exploring new directions, where numerical simulations play an essential role in providing guidelines and large statistics for the validation of the results.
Looking toward the future, our findings open up new interesting avenues to direct the dynamics and organization of ABPs. Local control over the rotational dynamics offers an alternative means to control the persistence of active trajectories at a given velocity, which can be harnessed to optimize the navigation of ABPs in complex environments^{40,41}. The introduction of periodic modulations in the rotational dynamics of ABPs also defines a new framework to study a variety of anomalous diffusion phenomena^{28,29,30,31}, beyond the cases presented here, with the emergence of interesting analogies with glassy dynamics, as discussed above. Since ABPs enable directed transport and pattern formation, even in the absence of particle interactions and external forces^{38,42,43}, introducing various forms of feedback, communication^{2}, delay^{44}, information flows^{11} and sensory ability^{12} defines new opportunities. Borrowing ideas and tools from signal processing and control systems, we envisage the engineering of more complex dynamical responses. We could, for instance, adapt ideas developed for nuclear detectors (deadtime analysis) or robotic systems (feedforward responses or negative delays^{39,45}) to devise new signal reconstruction strategies between discrete sampling events for ABPs, or design higherorder or integral responses to mimic the way in which biological microswimmers sense and adapt to chemical signals^{46}. Finally, a last challenge, which also constitutes an exciting opportunity, is to translate the capabilities provided by external feedback and control into internal responses, e.g., through adaptation and reconfiguration^{46}, in order to develop fully autonomous artificial microswimmers.
Methods
Fabrication of Janus particles
In order to fabricate our active Janus particles, silica colloids with 4.28 μm diameter (5% w/v, microParticles GmbH, Germany) are diluted to 1:6 in MilliQ water and spread on a glass slide, previously made hydrophilic by a 2minute air plasma treatment. Upon drying of the suspension, a closepacked particle monolayer is formed. The monolayer is then sputtercoated with 120 nm of nickel (Safematic CCU010, Switzerland) to create the Janus surface. After coating, the glass slide is placed overnight above a neodymium magnet (50 × 50 × 12.5 mm^{3}, 1.2 T) to align the magnetic moments of all particles in the direction of the compositional asymmetry. The particles are retrieved from the glass slide by pipetting and withdrawing a droplet of water on top of the monolayer. An identical procedure is followed for 2 μm silica particles, for which data are shown in the SI.
Cell preparation
The transparent electrodes are fabricated from 24 mm × 24 mm No. 0 coverglasses (85–115 μmthick, Menzel Gläser, Germany) covered with 3 nm of chromium and 10 nm of Au deposited by metal evaporation (Evatec BAK501 LL, Switzerland), followed by 10 nm of SiO_{2}, deposited by plasma enhanced chemical vapor deposition (STS Multiplex CVD, UK) to minimize the adhesion of particles to the substrate. A water droplet containing the particles is deposited on the bottom electrode within the 9 mmcircular opening of a 0.12 mmthick sealing spacer (Grace BioLabs SecureSeal, USA). The top and bottom electrodes are connected to a signal generator (National Instruments Agilent 3352X, USA) that applies the AC electric field, with a fixed frequency of 1 kHz and varying the V_{pp} voltage between 1 and 10 V. For 5 V, the applied electric field is 42 V mm^{−1}.
Experiments
The magnetic moment of the Janus particles is confined to the electrode plane and freely rotated within it through a custombuilt setup fitted with two pairs of independent Helmholtz coils^{47}. The magnetic field is constant within a few percent over a 1 mm^{2} area in the center of the cell and the maximum applicable magnetic field is 65 mT. In the experiments, we use a field of 30–40 mT to orient the particles. In order to impose an effective rotational diffusivity to the particles, the magnetic field angle at step n + 1 (θ_{n+1}) is obtained by adding to θ_{n} a random angular displacement Δθ, which is given by Eq. (2), where D_{R} is the target rotational diffusivity, Δt is the time step (1 ms in our experiments), and η is a random number sampled from a normal Gaussian distribution.
The Janus particles are imaged with a homebuilt brightfield microscope in transmission and image sequences are taken with a sCMOS camera (Andor Zyla) at 10 fps with a 512 × 512 pixels^{2} field of view. The image series to measure the thermal and imposed rotational diffusivity are acquired using a 50× objective (Thorlabs). The positions of the center of the JPs and of the metal cap are located using Labview routines. Then, a vector connecting both centers is used to determine the orientation of the particle at each frame for different D_{R}, from which the angular displacement distribution in Fig. 1c was calculated. The image series of ABPs actuated by the magnetic and the AC electric fields, are acquired with a 10× objective (Thorlabs). In this case, only the particle center of mass is located, and all the dynamical information is extracted from the final particle trajectory.
For the experiments with spacedependent D_{R}, single particles are located in real time by a custom LabView software. Series of 1024 × 1024 pixels^{2} images are recorded at 5.88 fps. The coordinates are used to update the particle D_{R} based on a predefined landscape. For the data presented in the main text, the field of view is divided into checkerboard patterns with 5 × 5, 10 × 10 and 20 × 20 squares, respectively, with alternating regions of \({D}_{{\rm{R}}}^{{\rm{H}}}\) = 10 rad^{2} s^{−1} and \({D}_{{\rm{R}}}^{{\rm{L}}}\) = 0.01 rad^{2} s^{−1}. D_{R} is updated every τ, using values ranging from the smallest possible delay of 170 ms to τ = 17 s, based on the particle coordinates at t − τ. We vary the ballistic timescale L/v by varying L between 16 and 64 μm um and v in the range 3–12 μm s^{−1}.
The particle thermal translational (\({D}_{{\rm{T}}}^{{\rm{th}}}\)) and rotational (\({D}_{{\rm{R}}}^{{\rm{th}}}\)) diffusion coefficients at room temperature (24 °C) are extracted from their 2D trajectories in the absence of magnetic and electric fields.
Numerical simulations
We simulate the dynamics of the ABPs by solving the equations of motion:
where m and I are the mass and the moment of inertia of the colloid, respectively, f_{x}(θ) and f_{y}(θ) are the x and y components of the active force acting on the colloid, γ_{T }is the friction coefficient associated with translational motion, γ_{R}(r, τ) is the statedependent friction coefficient associated with rotational motion, and η_{x}(t), η_{y}(t), and η_{θ}(t) are uncorrelated random numbers satisfying:
The active forces f_{x}(θ) and f_{y}(θ) are set equal to \({\gamma }_{{\rm{T}}} v\cos (\theta )\) and \({\gamma }_{{\rm{T}}} v\sin (\theta )\), respectively, such that in the absence of thermal noise and in the limit of long times the particles move at a constant velocity equal to v. We solved Eq. (3) in the underdamped limit through a Verlettype integration scheme proposed by GronbechJensen and Farago using the Itô convention^{48}. Although Eq. (3) could also be solved in the overdamped limit, this approach allowed us to achieve a faster convergence to the homogeneous distribution for τ = 0 using a relatively small integration step dt = 0.001 s.
For a positiondependent D_{R}, we let the rotational friction γ_{R}(r) = k_{B}T/D_{R}(r) vary as a function of the ABP’s position r = [x(t), y(t)] according to a checkerboard pattern as follows:
where:
and \({\gamma }_{{\rm{R}}}^{{\rm{H}}}\) and \({\gamma }_{{\rm{R}}}^{{\rm{L}}}\) correspond to the regions of high and low D_{R}, respectively.
For the implementation of the discrete timefeedback loop using the ZOH model, we update γ_{R} every t = nτ, where n is the number of samples. Since the rotational diffusivity is a physical quantity that must be continuous in time, we reconstruct it from discretetime inputs using the following function:
where γ_{R}[j] is γ_{R}(r) evaluated at \({\bf{r}}\left({\rm{t}}=j\tau \right)\):
Π is a rectangular function defined as:
and j is an integer number which is set equal to n − 1 in the simulations for a delay equal to τ, and to n for the those without delay.
Data availability
The data that support the findings of this study are available from the corresponding authors upon reasonable request.
Code availability
The code used in this study is available from the corresponding authors upon reasonable request.
References
Bechinger, C. et al. Active particles in complex and crowded environments. Rev. Mod. Phys. 88, 045006 (2016).
Grzybowski, B. A., Fitzner, K., Paczesny, J. & Granick, S. From dynamic selfassembly to networked chemical systems. Chem. Soc. Rev. 46, 5647–5678 (2017).
Frangipane, G. et al. Invariance properties of bacterial random walks in complex structures. Nat. Commun. 10, 2442 (2019).
Volpe, G. & Volpe, G. The topography of the environment alters the optimal search strategy for active particles. Proc. Natl Acad. Sci. USA 114, 11350–11355 (2017).
Manzo, C. et al. Weak ergodicity breaking of receptor motion in living cells stemming from random diffusivity. Phys. Rev. X 5, 011021 (2015).
Karani, H., Pradillo, G. E. & Vlahovska, P. M. Tuning the random walk of active colloids: From individual runandtumble to dynamic clustering. Phys. Rev. Lett. 123, 208002 (2019).
Buttinoni, I., Volpe, G., Kümmel, F., Volpe, G. & Bechinger, C. Active brownian motion tunable by light. J. Phys. Condens. Matter 24, 284129 (2012).
Pince, E. et al. Disordermediated crowd control in an active matter system. Nat. Commun. 7, 10907 (2016).
Lozano, C., Ten Hagen, B., Löwen, H. & Bechinger, C. Phototaxis of synthetic microswimmers in optical landscapes. Nat. Commun. 7, 12828 (2016).
Frangipane, G. et al. Dynamic density shaping of photokinetic E. coli. eLife 7, e36608 (2018).
Khadka, U., Holubec, V., Yang, H. & Cichos, F. Active particles bound by information flows. Nat. Commun. 9, 3864 (2018).
Lavergne, F. A., Wendehenne, H., Bäuerle, T. & Bechinger, C. Group formation and cohesion of active particles with visual perception–dependent motility. Science 364, 70–74 (2019).
Aubret, A., Youssef, M., Sacanna, S. & Palacci, J. Targeted assembly and synchronization of selfspinning microgears. Nat. Phys. 14, 1114 (2018).
Arlt, J., Martinez, V. A., Dawson, A., Pilizota, Z. & Poon, W. Painting with lightpowered bacteria. Nat. Commun. 9, 768 (2018).
Arlt, J., Martinez, V. A., Dawson, A., Pilizota, T. & Poon, W. C. K. Dynamicsdependent density distribution in active suspensions. Nat. Commun. 10, 2321 (2019).
Koumakis, N. et al. Dynamic optical rectification and delivery of active particles. Soft Matter 15, 7026–7032 (2019).
Berg, H. C.E. coli in Motion (Springer Science & Business Media, 2008).
Cates, M. E. & Tailleur, J., When are active brownian particles and runandtumble particles equivalent? consequences for motilityinduced phase separation. EPL (Europhys. Lett.), 101 (2013).
Ragazzini, J. R. & Franklin, G. F., Sampleddata control systems. McGrawHill series in control systems engineering. (McGrawHill, New York, 1958).
Squires, T. M. & Bazant, M. Z. Breaking symmetries in inducedcharge electroosmosis and electrophoresis. J. Fluid Mech. 560, 65–101 (2006).
Gangwal, S., Cayre, O. J., Bazant, M. Z. & Velev, O. D. Inducedcharge electrophoresis of metallodielectric particles. Phys. Rev. Lett. 100, 058302 (2008).
Yan, J. et al. Reconfiguring active particles by electrostatic imbalance. Nat. Mater. 15, 1095 (2016).
Kline, T. R., Paxton, W. F., Mallouk, T. E. & Sen, A. Catalytic nanomotors: Remotecontrolled autonomous movement of striped metallic nanorods. Angew. Chem. Int. Ed. Engl. 44, 744–746 (2005).
Palacci, J., Sacanna, A., Vatchinsky, S., Chaikin, P. M. & Pine, D. J. Photoactivated colloidal dockers for cargo transportation. J. Am. Chem. Soc. 135, 15978–15981 (2013).
Tierno, P., Golestanian, R., Pagonabarraga, I. & Sagués, F. Magnetically actuated colloidal microswimmers. J. Phys. Chem. B 112, 1652516528 (2008).
Demirors, A. F., Akan, M. T., Poloni, E. & Studart, A. R. Active cargo transport with janus colloidal shuttles using electric and magnetic fields. Soft Matter 14, 4741–4749 (2018).
Ghosh, A. & Fischer, P. Controlled propulsion of artificial magnetic nanostructured propellers. Nano Lett. 9, 2243–2245 (2009).
Kindermann, F. et al. Nonergodic diffusion of single atoms in a periodic potential. Nat. Phys. 13, 137–141 (2016).
Speer, D., Eichhorn, R. & Reimann, P., Directing brownian motion on a periodic surface. Phys. Rev. Lett. 102, 124101 (2009).
Bouchaud, J. P. & Georges, A. Anomalous diffusion in disordered media  statistical mechanisms, models and physical applications. Phys. Rep. 195, 127–293 (1990).
Geislinger, B. & Kawai, R., Brownian molecular motors driven by rotationtranslation coupling. Phys. Rev. E 74, 011912 (2006).
Zheng, X. et al. Nongaussian statistics for the motion of selfpropelled janus particles: experiment versus theory. Phys. Rev. E. Stat. Nonlin. Soft Matter Phys. 88, 032304 (2013).
Chaudhuri, P., Berthier, L. & Kob, W. Universal nature of particle displacements close to glass and jamming transitions. Phys. Rev. Lett. 99, 060604 (2007).
Wang, B., Anthony, S. M., Bae, S. C. & Granick, S., Anomalous yet brownian. Proc. Natl. Acad. Sci. U S A, 106, 1516015164 (2009).
Saltzman, E. J. & Schweizer, K. S. Largeamplitude jumps and nongaussian dynamics in highly concentrated hard sphere fluids. Phys. Rev. E 77, 051504 (2008).
Weeks, E. R. & Weitz, D. Subdiffusion and the cage effect studied near the colloidal glass transition. Chem. Phys. 284, 361–367 (2002).
Weeks, E. R., Crocker, J. C., Levitt, A. C., Schofield, A. & Weitz, D. A. Threedimensional direct imaging of structural relaxation near the colloidal glass transition. Science 287, 627–631 (2000).
Cates, M. E. & Tailleur, J. Motilityinduced phase separation. Annu. Rev. Condens. Matter Phys., Vol. 6 6, 219–244 (2015).
Leyman, M., Ogemark, F., Wehr, J. & Volpe, G., Tuning phototactic robots with sensorial delays. Phys. Rev. E 98, 052606 (2018).
Volpe, G., Buttinoni, I., Vogt, D., Kümmerer, H.J. & Bechinger, C. Microswimmers in patterned environments. Soft Matter 7, 8810–8815 (2011).
Makarchuk, S., Braz, C.,V., Araújo, N. A. M., Ciric, L. & Volpe, G. Enhanced propagation of motile bacteria on surfaces due to forward scattering. Nat. Commun. 10, 4110 (2019).
Zhang, J., Luijten, E., Grzybowski, B. A. & Granick, S. Active colloids with collective mobility status and research opportunities. Chem. Soc. Rev. 46, 5551–5569 (2017).
Dai, B. et al. Programmable artificial phototactic microswimmer. Nat. Nanotechnol. 11, 1087–1092 (2016).
Scholz, C., Jahanshahi, S., Ldov, A. & Löwen, H. Inertial delay of selfpropelled particle. Nat. Commun. 9, 5156 (2018).
Mijalkov, M., McDaniel, A., Wehr, J. & Volpe, G., Engineering sensorial delay to control phototaxis and emergent collective behaviors. Phys. Rev. X 6, 011008 (2016).
Bourret, R. B. & Stock, A. M. Molecular information processing: Lessons from bacterial chemotaxis. J. Biol. Chem. 277, 9625–9628 (2002).
Buttinoni, I., Zell, Z. A., Squires, T. M. & Isa, L. Colloidal binary mixtures at fluidfluid interfaces under steady shear: structural, dynamical and mechanical response. Soft Matter 11, 8313–8321 (2015).
GronbechJensen, N. & Farago, O. A simple and effective verlettype algorithm for simulating langevin dynamics. Mol. Phys. 111, 983–991 (2013).
Acknowledgements
We thank Hartmut Löwen for insightful discussions. L.I., M.A.F.R., and L.A.F. acknowledge financial support from the Swiss National Science Foundation Grant PP00P2172913/1.
Author information
Authors and Affiliations
Contributions
Author contributions are defined based on the CRediT (Contributor Roles Taxonomy) and listed alphabetically. Conceptualization: L.A., I.B., M.A.F.R., F.G., L.I., G.V. Formal analysis: L.A., F.G. Funding acquisition: L.I. Investigation: L.A., M.A.F.R., F.G., L.I., M.R. Methodology: L.A., I.B., M.A.F.R., F.G., L.I. Project administration: L.I. Software: L.A., M.A.F.R., F.G., G.V. Supervision: L.I. Validation: L.A., M.A.F.R., F.G. Visualization: L.A., M.A.F.R., F.G., L.I. Writing—original draft: L.A., M.A.F.R., F.G., L.I. Writing—review and editing: L.A., I.B., M.A.F.R., F.G., L.I., G.V.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks Francois Lavergne and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
FernandezRodriguez, M.A., Grillo, F., Alvarez, L. et al. Feedbackcontrolled active brownian colloids with spacedependent rotational dynamics. Nat Commun 11, 4223 (2020). https://doi.org/10.1038/s41467020178644
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467020178644
This article is cited by

A geometric criterion for the optimal spreading of active polymers in porous media
Nature Communications (2021)

Reconfigurable artificial microswimmers with internal feedback
Nature Communications (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.