Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Integrated redox-active reagents for photoinduced regio- and stereoselective fluorocarboborylation


Vinylboronates and alkylboronates are key components in variegated transformations in all facets of chemical science. The synthesis of vinylboronates and alkylboronates suffers from step-tedious and poor stereoselective procedures. We have developed a regulated radical difunctionalization strategy for the construction of fluorine-containing vinylboronates and alkylboronates with an integrated redox-active reagent IMDN-SO2RF. This bench-stable imidazolium sulfonate cationic salt offers a scalable and operational protocol for the fluoroalkylation-borylation of unsaturated hydrocarbons in a high regio- and stereoselective manner. The products can be further transformed into valuable fluorinated building blocks.


Difunctionalization of alkenes and alkynes has been widely explored for rapid diversification of double/triple bonds1,2,3,4,5,6. Traditional transition metal-catalyzed difunctionalization methods have been well-developed to control the regioselectivity and stereoselectivity7,8. Along these lines, cascade radical addition of unsaturated hydrocarbons in the absence of metallo-intermediate has been realized through careful manipulation of the radical reactivities9,10,11. A single process to achieve radical difunctionalization with extensive functionality tolerance, especially fluorine-containing moieties, is of great value in altering the physical and biological properties of the unsaturated hydrocarbons4,12,13,14,15,16,17,18. Studer and co-workers19 have reported a radical 1,2-trifluoromethylboration of unactivated alkenes using gaseous CF3I. Meanwhile, the direct 1,2-fluoroalkylboration of alkynes has also been explored20,21,22. The consequential vicinial vinylboronates, which can be readily transformed to a myriad of fluorine-containing building blocks, have been seldom realized. The only two existing approaches of trifluoromethylated vinylboronates were derived from fluorinated alkynes23 and oxiranes24. The inaccessibility of those pre-functionalized precursors and operationally tedious procedures prohibited the stepwise fluorination-borylation strategies from practical use (Fig. 1a). Thus, the development of regioselective installation of fluoroalkyl and boronated functionalities to unactivated hydrocarbons in the absence of transition-metal catalysts represents great challenge.

Fig. 1: Origin of the reaction design.
figure 1

a Early reports on borylation of CF3-containing substrates. b Lewis base-activated radical borylation. c The design for dual functional redox-active reagent. d Imidazolium sulfonate-derived bench-stable fluoroalkylating reagent. e Mechanistic insight of sequential radical trifluoromethylborylation.

Due to the complexity of radical process incorporating C–C and C–B bonds formation, several issues need to be addressed, including the reactivities of carbon and boron-centered radicals, the regioselectivity of the radical additions to unsymmetrical alkynes, and stereoselectivity towards E/Z vinylboronates. Typically, a radical borylation process25,26,27,28,29,30,31,32 often employs Lewis basic solvents/mediators such as DMAc33,34, DMF19,35, phthalimide36, and pyridine37,38 for the activation of diboron reagents via homolytic cleavage of B–B bonds (Fig. 1b). However, the exogenous Lewis base-activated diboron species inevitably deplete CF3 radicals that generated promptly from the trifluromethylating reagents, unable to engage in the desired trifluoromethylborylation sequence (for DFT calculation details, see Supplementary Fig. 18). Inspired by recent radical-induced difunctionalization strategies39,40, we intend to design an integrated reagent that progressively releases CF3 radical for alkene/alkyne addition, and the endogenous Lewis basic residue subsequently activates the B–B bond for further borylation (Fig. 1c).

Trifluoromethanesulfinate-derived fluorinating reagents have been devised and adopted for direct functionalization of alkenes, alkynes, and arenes41. In contrast, the highly hydroscopic and corrosive trifluoromethanesulfonic anhydride (Tf2O) as a trifluoromethyl source is rarely explored. For its strong electrophilic nature, triflic anhydride is commonly used as an alcohol and amine protecting agent42,43,44. Qing and co-workers45 have described a triflated pyridine intermediate (TfPy+·OTf) that generated in situ for trifluoromethylated arenes and alkynes. However, the strong electron-withdrawing triflate-derived pyridinium complex is preferably dissociated and unattainable in solid or liquid phase. We speculated that a more basic N-heterocycle such as imidazole could harness the highly reactive Tf2O to assemble a bench-stable redox-active reagent. The positive charge of the resulting imidazolium trifluoromethanesulfonate can be delocalized on both nitrogen. Through the cleavage of the stabilized N–S bond (BDE ≈ 70 kcal mol−1)46, this cationic complex undergoes SET process to generate CF3SO2 radical. Meanwhile, as a Lewis base, the imidazole residue can further activate the diboron reagents towards homolytic cleavage of the diboron reagent20,34,35,36,37,38,39. Herein, we have synthesized a dual functional reagent IMDN-SO2CF3 1a–1g, a scalable and air-stable crystalline salt for a sequential radical fluoroalkylation-borylation of unsaturated hydrocarbons (Fig. 1d). First, under the irradiation, Ir(III)* can reduce the cationic reagent 1 to a neutral radical I and releases CF3 radical, SO2, and imidazole. Then the addition of ·CF3 to the alkyne regioselectively furnishes vinylic radical II. Subsequent addition of vinyl radical II to B2cat2 affords a Z-vinyl diboron radical III. The control of stereoselectivity is governed by steric repulsion between the trifluoromethyl group and the boronates. The following activation of diboron by the Lewis basic imidazole forms a highly reactive B–N heteroleptic intermediate IV, which leads to the carboborylation product 3 and imidazole-stabilized boryl radical V. Finally, photo-oxidation of V followed by coupling with OTf affords boryl imidazolium salt VI and regenerates Ir(III) (Fig. 1e). These proposed intermediates and selectivities are supported by DFT calculations (see Supplementary Figs. 16–19) This photoinduced cascade radical difunctionalization offers a concise and applicable protocol for constructing highly regio- and stereoselective fluorine-substituted vinylboronates and vicinal fluoroalkyl boronates.


Reaction optimization

To validate the above hypothesis, we selected phenylacetylene (2a) as pilot substrate to test the trifluoromethylborylation reaction (Table 1). After extensive screening of conditions (see Supplementary Tables 1 and 2), we found that when using 2.5 equivalents of IMDN-SO2CF3 (1a) (E1/2red = −1.385 V vs SCE), 2 mol% of fac-Ir(ppy)3 (E1/2IV/III* = −1.73 V vs SCE)47, 2.5 equivalents of B2cat2 in a mixed solvent of MeCN and EtOAc (1:3 v/v) at room temperature under the irradiation of 30 W blue LEDs, the vinylboronate product 3a could be obtained in 82% yield (determined by 19F NMR) with over 20:1 Z/E ratio. Different imidazolium sulfonate reagents 1b1h were then examined (Table 1). The yield of 3a descended when the benzoimidazolium reagents 1b and 1c were used (entries 2 and 3). The counterion was found to be important for this transformation, as evidenced by the low yield (53%) obtained when using BF4 salt (1d, entry 4). The reaction proceeded with 2-phenylimidazole reagents 1e and 1f in 76% and 60% yield, respectively (entries 5–6). The dimethylated reagent 1g resulted in a lower conversion (entry 7). The electroneutral reagent 1h failed to produce the desired product under irradiation, which may due to the low reduction potential (E1/2red = −1.808 V vs SCE) (entry 8). This result validated the precedential presumption that the cationic reagent can serve as a better electron acceptor to furnish N-centered neutral radicals48,49,50,51. Other diboron reagents, such as bis(pinacolato)diboron (B2pin2) and bis(neopentylglycolato)-diboron (B2neop2), did not provide the corresponding borylated products (entries 9–10). Addition of excess bases such as imidazole and pyridine resulted in much lower yields (entries 11–12).

Table 1 Optimization of the reaction conditions.

Substrate scope with respect to the alkynes

Using 2 mol% of fac-Ir(ppy)3, IMDN-SO2CF3 (1a) (2.5 equiv), and B2cat2 (2.5 equiv) at ambient temperature, a range of alkyens underwent fluoroalkylation-borylation with good efficiency. As shown in Fig. 2, the reaction can be performed at a gram scale to give 3a in 61% yield and high stereoselectivity. Aromatic alkynes with electro-donating or electro-withdrawing substituents afford the desired products 3b3j in good to excellent yields (60–93%) with high regio- and stereoselectivity (Z:E > 20:1).

Fig. 2: Substrate scope of the alkynes.
figure 2

aCrude yields determined by 19F NMR spectroscopy using benzotrifluoride or trifluoromethoxybenzene as an internal standard. bValues in parentheses are of isolated yields. cThe E/Z ratio was determined by 19F NMR. dThe E/Z ratio was determined by 1H NMR. eCrude yields determined by 1H NMR spectroscopy using dibromomethane as an internal standard. f2.0 mmol of 2p was used.

Functionalities including halides (3b, 3m, 3n), nitrile (3d), ester (3g), and boronate (3j) are tolerated. Naphthyl- and thienyl-substituted alkynes also readily transformed into the Z-products 3h and 3i in good yields. The reaction could also be applied to alkynyl deuterium to produce the (Z)-selective deuterated vinylboronates 3k3n in 52–72% yields. An attempt of more challenging internal alkyne substrate resulted in the tetrasubstituted olefin in high regio- and stereoselectivity (3o, 45%). For further investigation of the reaction scope, different fluoroalkylating reagents 1i1l have been synthesized and applied to the standard cabonborylation conditions. Perfluoro-butyl (1i), hexyl (1j), and octanyl (1k) reagents could furnish the corresponding products 3q3s in good yields (81–87%). Using a perhalogenated ether-derived sulfonate (1l), the vinylboronate 3t was formed in high yield. To demonstrate the scalability of such radical carboborylation protocol, the reaction was carried out on 10 mmol scale to afford 3a in 61% yield with equally high Z/E ratio. Under the standard reaction conditions, alkyl-substituted alkynes could not transform to the desired products. DFT calculations illustrate that the energy barrier of CF3 radical addition to aliphatic alkynes is higher than that to aromatic alkynes. Furthermore, a competing pathway of CF3 radical addition to B2cat2 leads to other trifluoromethylated products. Therefore, an excess amount of alkyl alkyne substrate is needed to facilitate the main reaction pathway. By using four equivalents of the alkyne, the borylated product 3p can be obtained in 26% yield. For internal aliphatic alkynes, the computed barrier with the CF3 radical is much higher than that for the reaction of B2Cat2 with the CF3 radical. Therefore, no desired product is obtained using internal aliphatic alkynes as substrate.

Substrate scope with respect to the olefins

The α-fluoroalkylated boronates are also useful fluorine-containing synthons for further elaboration. By slight variation of the standard reaction conditions (see Supplementary Tables 310), we have extended this carbonborylation protocol to a range of unactivated alkenes (Fig. 3). Using IMDN-SO2CF3 (1e), alkenes bearing ester and amide functionalities underwent radical 1,2-carbonboration to afford trifluoromethylated boronates (5a5h) in good yields. Heteroaryl (5i5j), sulfonyl (5k), and oxygenated alkyl groups (5l5n) at various positions of the alkenes were also found effective. Cyclic alkenes could also transform into the desired products 5q and 5y. Noteworthy, biorelevant molecules, such as boldenone, lanosterol, (+)-α-tocopherol, and estrone-derived terminal alkenes afforded β-trifluoromethylboronates (5r5u) in good yields. Additionally, fluoroalkyl radicals including ·C4F9 (1i), ·C6F13 (1j), ·C8F17 (1k), and ·CF2CF2O(CF2)7CF2Cl (1l) were successfully stitched to unactivated olefins to afford fluoroalkylborylated products in moderate yields (5v5dd). The reaction with styrene failed to afford the desired product due to inert reactivity of benzylic radical.

Fig. 3: Substrate scope of the olefins.
figure 3

aCrude yields determined by 19F NMR. bValues in parentheses are isolated yields. cThe diastereomeric ratio determined by 1H NMR.

Synthetic applications

The synthetic utility of the method was demonstrated in a number of transformations of the highly functionalized alkylboronates and alkenylboronates20,52,53 (Fig. 4). Oxidation of β-CF3 boronate 5a afforded hydroxylated product 6 in 62% yield. Silver-catalyzed radical deboronofluorination of 5a in aqueous solution provided the alkyl fluoride 7 in 76% yield. Vinylation, oxidative coupling, and homologation of 5p afforded functionalized products 810 in good yields. Halogenation of vinylboronic ester 3a resulted in the formation of β-CF3-vinyl bromide 11(53%). Palladium-catalyzed Suzuki–Miyaura cross-coupling of 3a with (hetero)aryl iodides afforded the corresponding trisubstituted alkenes 12 (90%) and 15 (88%). Olefination and alkynylation using vinyl bromide or alkynyl bromide also proceeded smoothly to generate 13 and 14 in 73% and 96% yields, respectively. The coupling of 3a with bioactive estrone-derived triflate produced the corresponding product 16 with high stereoselectivity.

Fig. 4: Further transformations.
figure 4

aH2O2 (30%), NaOH (3 M), THF, 0 °C to rt. bSelectfluor, AgNO3, TFA, H3PO4, DCM/H2O, 50 °C. cVinylmagnesium bromide, I2, THF, −78 °C to 0 °C. dn-BuLi, NBS, thiophene, THF, −78 °C. en-BuLi, dibromomethane, THF, −78 °C to rt. fCuBr2, MeOH, 80 °C. gPd(PPh3)4 (5 mol%), Cs2CO3, toluene, H2O, 80 °C.


In summary, we have described an air-stable redox-active reagent IMDN-SO2RF 1 with high reactivity and scalability. A key design feature of this dual functional imidazolium sulfonate reagent is the cationic nature that favors the progressive formation of fluoroalkyl radicals by SET reduction under photocatalytic conditions. Meanwhile, the in situ-generated Lewis basic imidazole residue promotes the B–B bond cleavage. The integrated reagent is applicable to regulate the reaction sequence of carbon and boron-centered radicals to access various fluorine-bearing vinylboronates and alkylboronates with high stereo- and regioselectivities. Further study of this reagent is underway in our laboratory.


General procedure for the synthesis of imidazolium salts 1

To a one-necked 1000 mL flask equipped with a magnetic stirrer, the corresponding imidazole (100 mmol), Et3N (150 mmol), and 600 mL DCM were added. The flask was then cooled in an ice bath, and 130 mmol (36.8 g) (CF3SO2)2O was bubbled into the flask slowly. The mixture was stirred at room temperature for 2 h and evaporated in vacuo, quenched with water, and extracted with ethyl acetate (300 mL × 3). The combined organic layers were dried over Na2SO4, filtered, and concentrated. The product was purified by flash column chromatography on silica gel with n-pentane/ethyl acetate as eluent to give the imidazolyl sulfonamide. Under argon, to a solution of the imidazolyl sulfonamide in dried DCM (400 mL) was added dropwise MeOTf (or Me3OBF4) (130 mmol) at 0 °C. Then, the mixture was stirred at room temperature for 12 h. (If EtOTf is used, the reaction is refluxed for 24 h.) After that, the mixture was concentrated under rotary evaporation to give a white solid (or a viscous liquid) crude product, to which Et2O (300 mL) was added. With vigorous stirring, a solid precipitate was formed and washed with Et2O (200 mL × 3) and dried in vacuo to yield the imidazolium salt 1 as a white solid.

General procedure for the synthesis of vinylboronates 3

Under argon, to a solution of 1 (0.50 mmol, 2.5 equiv), B2Cat2 (0.5 mmol, 2.5 equiv) and fac-Ir(ppy)3 (2 mol%) in MeCN:EtOAc (1:3) (3 mL) was added corresponding alkynes 2 (0.2 mmol) at room temperature. After that, the tube was exposed to 30 W blue LEDs at room temperature about 30 h until the reaction was completed as monitored by TLC or GC-MS analysis. A solution of pinacol (236 mg, 2 mmol) in MeCN (1.0 mL) was added dropwise to the mixture at 0 °C. After 1 h, saturated ammonium chloride solution (15 mL) was added and the aqueous layer was extracted with hexane (3 × 15 mL). The combined organic layers were dried over Na2SO4, filtered, and concentrated. The product was purified by flash column chromatography on silica gel with n-pentane/ethyl acetate as eluent to give the vinylboronates 3.

General procedure for the synthesis of alkylboronates 5

Under argon, to a solution of 1 (0.50 mmol, 2.5 equiv), B2Cat2 (0.6 mmol, 3.0 equiv) and fac-Ir(ppy)3 (2 mol%) in 1:1 MeCN/acetone (0.2 mL) was added Et3B (0.6 mmol, 3.0 equiv, 1 mol/L in THF) and corresponding alkenes 4 (0.2 mmol) at room temperature. After that, the tube was exposed to 30 W blue LEDs at room temperature for 30 h until the reaction was completed as monitored by TLC or GC-MS analysis. A solution of pinacol (142 mg, 1.2 mmol) in Et3N (1.1 mL) was added to the mixture. After 1 h, the reaction mixture was evaporated in vacuo. The product was purified by flash column chromatography on silica gel with n-pentane/ethyl acetate as eluent to give the alkylboronates 5.

Data availability

The authors declare that the main data supporting the findings of this study, including experimental procedures and compound characterization, are available within the article and its Supplementary Information files. X-ray structural data of compound 1a are available free of charge from the Cambridge Crystallographic Data Center under the deposition number CCDC 1958307. These data can be obtained free of charge from The Cambridge Crystallographic Data Center via


  1. Song, H.-X., Han, Q.-Y., Zhao, C.-L. & Zhang, C.-P. Fluoroalkylation reactions in aqueous media: a review. Green Chem. 20, 1662–1731 (2018).

    CAS  Article  Google Scholar 

  2. Hoffmann, R. W. Markovnikov free radical addition reactions, a sleeping beauty kissed to life. Chem. Soc. Rev. 45, 577–583 (2016).

    CAS  PubMed  Article  Google Scholar 

  3. Greenhalgh, M. D., Jones, A. S. & Thomas, S. P. Iron-catalysed hydrofunctionalisation of alkenes and alkynes. ChemCatChem 7, 190–222 (2015).

    CAS  Article  Google Scholar 

  4. Alonso, C., Martinez de Marigorta, E., Rubiales, G. & Palacios, F. Carbon trifluoromethylation reactions of hydrocarbon derivatives and heteroarenes. Chem. Rev. 115, 1847–1935 (2015).

    CAS  PubMed  Article  Google Scholar 

  5. Merino, E. & Nevado, C. Addition of CF3 across unsaturated moieties: a powerful functionalization tool. Chem. Soc. Rev. 43, 6598–6608 (2014).

    CAS  PubMed  PubMed Central  Article  Google Scholar 

  6. Zeng, X. Recent advances in catalytic sequential reactions involving hydroelement addition to carbon–carbon multiple bonds. Chem. Rev. 113, 6864–6900 (2013).

    CAS  PubMed  Article  Google Scholar 

  7. Li, Y., Wu, D., Cheng, H.-G. & Yin, G. Difunctionalization of alkenes involving metal migration. Angew. Chem. Int. Ed. 59, 2–16 (2020).

    Article  CAS  Google Scholar 

  8. Yin, G., Mu, X. & Liu, G. Palladium (II)-catalyzed oxidative difunctionalization of alkenes: bond forming at a high-valent palladium center. Acc. Chem. Res. 49, 2413–2423 (2016).

    CAS  PubMed  Article  Google Scholar 

  9. Sivaguru, P., Wang, Z., Zanoni, G. & Bi, X. Cleavage of carbon-carbon bonds by radical reactions. Chem. Soc. Rev. 48, 2615–2656 (2019).

    CAS  PubMed  Article  Google Scholar 

  10. Ravelli, D., Protti, S. & Fagnoni, M. Carbon–carbon bond forming reactions via photogenerated intermediates. Chem. Rev. 116, 9850–9913 (2016).

    CAS  PubMed  Article  Google Scholar 

  11. Wille, U. Radical cascades initiated by intermolecular radical addition to alkynes and related triple bond systems. Chem. Rev. 113, 813–853 (2013).

    CAS  PubMed  Article  Google Scholar 

  12. Tomashenko, O. A. & Grushin, V. V. Aromatic trifluoromethylation with metal complexes. Chem. Rev. 111, 4475–4521 (2011).

    CAS  PubMed  Article  Google Scholar 

  13. Nie, J., Guo, H.-C., Cahard, D. & Ma, J.-A. Asymmetric construction of stereogenic carbon centers featuring a trifluoromethyl group from prochiral trifluoromethylated substrates. Chem. Rev. 111, 455–529 (2011).

    CAS  PubMed  Article  Google Scholar 

  14. Zhang, W. et al. Leaving group assisted strategy for photoinduced fluoroalkylations using N-hydroxybenzimidoyl chloride esters. Angew. Chem. Int. Ed. 58, 624–627 (2019).

    CAS  Article  Google Scholar 

  15. Daniel, M. et al. Fluorinated sulfilimino iminiums: efficient and versatile sources of perfluoroalkyl radicals under photoredox catalysis. Angew. Chem. Int. Ed. 56, 3997–4001 (2017).

    CAS  Article  Google Scholar 

  16. Wang, F., Wang, D., Mu, X., Chen, P. & Liu, G. Copper-catalyzed intermolecular trifluoromethylarylation of alkenes: mutual activation of arylboronic acid and CF3 + reagent. J. Am. Chem. Soc. 136, 10202–10205 (2014).

    CAS  PubMed  Article  Google Scholar 

  17. Wang, F., Qi, X., Liang, Z., Chen, P. & Liu, G. Copper-catalyzed intermolecular trifluoromethylazidation of alkenes: convenient access to CF3-containing alkyl azides. Angew. Chem. Int. Ed. 53, 1881–1886 (2014).

    CAS  Article  Google Scholar 

  18. Liang, Z., Wang, F., Chen, P. & Liu, G. Copper-catalyzed intermolecular trifluoromethylthiocyanation of alkenes: convenient access to CF3-containing alkyl thiocyanates. Org. Lett. 17, 2438–2441 (2015).

    CAS  PubMed  Article  Google Scholar 

  19. Cheng, Y., Muck-Lichtenfeld, C. & Studer, A. Transition metal-free 1, 2-carboboration of unactivated alkenes. J. Am. Chem. Soc. 140, 6221–6225 (2018).

    CAS  PubMed  PubMed Central  Article  Google Scholar 

  20. Guo, W.-H., Zhao, H.-Y., Luo, Z.-J., Zhang, S. & Zhang, X. Fluoroalkylation-borylation of alkynes: an efficient method to obtain (Z)-tri- and tetrasubstituted fluoroalkylated alkenylboronates. ACS Catal. 9, 38–43 (2019).

    CAS  Article  Google Scholar 

  21. Domanski, S., Gatlik, B. & Chaładaj, W. Pd-catalyzed boroperfluoroalkylation of alkynes opens a route to one-pot reductive carboperfluoroalkylation of alkynes with perfluoroalkyl and aryl iodides. Org. Lett. 21, 5021–5025 (2019).

    CAS  PubMed  Article  Google Scholar 

  22. Wang, S. et al. Palladium-catalyzed anti-selective fluoroalkylboration of internal and terminal alkynes. Org. Lett. 20, 5631–5635 (2018).

    CAS  PubMed  Article  Google Scholar 

  23. Liu, X., Shimizu, M. & Hiyama, T. A facile stereocontrolled approach to CF3-substituted triarylethenes: synthesis of panomifene. Angew. Chem. Int. Ed. 43, 879–882 (2004).

    CAS  Article  Google Scholar 

  24. Konno, T., Chae, J., Tanaka, T., Ishihara, T. & Yamanaka, H. A sequential highly stereoselective hydroboration and Suzuki-Miyaura cross-coupling reaction of fluoroalkylated internal acetylenes: a practical one-pot synthesis of fluoroalkylated trisubstituted alkenes. Chem. Commun. 40, 690–691 (2004).

    Article  Google Scholar 

  25. Wu, J., Bar, R. M., Guo, L., Noble, A. & Aggarwal, V. K. Photoinduced deoxygenative borylations of aliphatic alcohols. Angew. Chem. Int. Ed. 58, 18830–18834 (2019).

    CAS  Article  Google Scholar 

  26. Friese, F. W. & Studer, A. Deoxygenative borylation of secondary and tertiary alcohols. Angew. Chem. Int. Ed. 58, 9561–9564 (2019).

    CAS  Article  Google Scholar 

  27. Yan, G., Huang, D. & Wu, X. Recent advances in C-B bond formation through a free radical pathway. Adv. Synth. Catal. 360, 1040–1053 (2018).

    CAS  Article  Google Scholar 

  28. Xu, L. Decarboxylative borylation: new avenues for the preparation of organoboron compounds. Eur. J. Org. Chem. 2018, 3884–3890 (2018).

    CAS  Google Scholar 

  29. Wang, J. et al. Cu-catalyzed decarboxylative borylation. ACS Catal. 8, 9537–9542 (2018).

    CAS  PubMed  PubMed Central  Article  Google Scholar 

  30. Li, C. et al. Decarboxylative borylation. Science 356, 1045–1052 (2017).

    CAS  Google Scholar 

  31. Yang, C. T. et al. Alkylboronic esters from copper-catalyzed borylation of primary and secondary alkyl halides and pseudohalides. Angew. Chem. Int. Ed. 51, 528–532 (2012).

    CAS  Article  Google Scholar 

  32. Dudnik, A. S. & Fu, G. C. Nickel-catalyzed coupling reactions of alkyl electrophiles, including unactivated tertiary halides, to generate carbon-boron bonds. J. Am. Chem. Soc. 134, 10693–10697 (2012).

    CAS  PubMed  PubMed Central  Article  Google Scholar 

  33. Wu, J., He, L., Noble, A. & Aggarwal, V. K. Photoinduced deaminative borylation of alkylamines. J. Am. Chem. Soc. 140, 10700–10704 (2018).

    CAS  PubMed  Article  Google Scholar 

  34. Sandfort, F., Strieth-Kalthoff, F., Klauck, F. J. R., James, M. J. & Glorius, F. Deaminative borylation of aliphatic amines enabled by visible light excitation of an electron donor-acceptor complex. Chem. Eur. J. 24, 17210–17214 (2018).

    CAS  PubMed  Article  Google Scholar 

  35. Cheng, Y., Muck-Lichtenfeld, C. & Studer, A. Metal-free radical borylation of alkyl and aryl iodides. Angew. Chem. Int. Ed. 57, 16832–16836 (2018).

    CAS  Article  Google Scholar 

  36. Fawcett, A. et al. Photoinduced decarboxylative borylation of carboxylic acids. Science 357, 283–286 (2017).

    ADS  CAS  PubMed  Article  Google Scholar 

  37. Hu, J., Wang, G., Li, S. & Shi, Z. Selective C-N borylation of alkyl amines promoted by Lewis base. Angew. Chem. Int. Ed. 57, 15227–15231 (2018).

    CAS  Article  Google Scholar 

  38. Candish, L., Teders, M. & Glorius, F. Transition-metal-free, visible-light-enabled decarboxylative borylation of aryl N-hydroxyphthalimide esters. J. Am. Chem. Soc. 139, 7440–7443 (2017).

    CAS  PubMed  Article  Google Scholar 

  39. Monos, T. M., McAtee, R. C. & Stephenson, C. R. J. Arylsulfonylacetamides as bifunctional reagents for alkene aminoarylation. Science 361, 1369–1373 (2018).

    ADS  CAS  PubMed  Article  Google Scholar 

  40. Lan, X., Wang, N. & Xing, Y. Recent advances in radical difunctionalization of simple alkenes. Eur. J. Org. Chem. 2017, 5821–5851 (2017).

    CAS  Article  Google Scholar 

  41. Ni, C., Hu, M. & Hu, J. Good partnership between sulfur and fluorine: sulfur-based fluorination and fluoroalkylation reagents for organic synthesis. Chem. Rev. 115, 765–825 (2015).

    CAS  PubMed  Article  Google Scholar 

  42. Xu, X. H., Matsuzaki, K. & Shibata, N. Synthetic methods for compounds having CF3-S units on carbon by trifluoromethylation, trifluoromethylthiolation, triflylation, and related reactions. Chem. Rev. 115, 731–764 (2015).

    CAS  PubMed  Article  Google Scholar 

  43. Shainyan, B. A. & Tolstikova, L. L. Trifluoromethanesulfonamides and related compounds. Chem. Rev. 113, 699–733 (2013).

    CAS  PubMed  Article  Google Scholar 

  44. Baraznenok, I. L., Nenajdenko, V. G. & Balenkova, E. S. Chemical transformations induced by triflic anhydride. Tetrahedron 56, 3077–3119 (2000).

    CAS  Article  Google Scholar 

  45. Ouyang, Y., Xu, X. H. & Qing, F. L. Trifluoromethanesulfonic anhydride as a low-cost and versatile trifluoromethylation reagent. Angew. Chem. Int. Ed. 57, 6926–6929 (2018).

    CAS  Article  Google Scholar 

  46. Kraka, E., Setiawan, D. & Cremer, D. Re-evaluation of the bond length-bond strength rule: the stronger bond is not always the shorter bond. J. Comput. Chem. 37, 130–142 (2016).

    CAS  PubMed  Article  Google Scholar 

  47. Kelly, C. B. et al. Preparation of visible-light-activated metal complexes and their use in photoredox/nickel dual catalysis. Nat. Protoc. 12, 472–492 (2017).

    CAS  PubMed  PubMed Central  Article  Google Scholar 

  48. Lee, J. W., Zheng, W., Morales-Rivera, C. A., Liu, P. & Ngai, M.-Y. Catalytic radical difluoromethoxylation of arenes and heteroarenes. Chem. Sci. 10, 3217–3222 (2019).

    CAS  PubMed  PubMed Central  Article  Google Scholar 

  49. Bao, X., Wang, Q. & Zhu, J. Dual photoredox/copper catalysis for the remote C(sp3)-H functionalization of alcohols and alkyl halides by N-alkoxypyridinium salts. Angew. Chem. Int. Ed. 58, 2139–2143 (2019).

    CAS  Article  Google Scholar 

  50. Zheng, W., Lee, J. W., Morales-Rivera, C. A., Liu, P. & Ngai, M. Y. Redox-active reagents for photocatalytic generation of the OCF3 radical and (hetero)aryl C-H trifluoromethoxylation. Angew. Chem. Int. Ed. 57, 13795–13799 (2018).

    CAS  Article  Google Scholar 

  51. Kim, I. et al. Visible-light-induced pyridylation of remote C(sp3)-H bonds by radical translocation of N-alkoxypyridinium salts. Angew. Chem. Int. Ed. 57, 15517–15522 (2018).

    CAS  Article  Google Scholar 

  52. Wu, N.-Y., Xu, X.-H. & Qing, F.-L. Copper-catalyzed regioselective borylfluoromethylation of alkenes. ACS Catal. 9, 5726–5731 (2019).

    CAS  Article  Google Scholar 

  53. Su, W. et al. Ligand-controlled regiodivergent copper-catalyzed alkylboration of unactivated terminal alkynes. ACS Catal. 6, 6417–6421 (2016).

    CAS  Article  Google Scholar 

Download references


Financial support from the National Natural Science Foundation of China (No. 21772085 and No. 21971107) and the Natural Science Foundation of Jiangsu Province (BK20170631) is gratefully acknowledged. The numerical calculations in this paper have been done on the computing facilities in the High Performance Computing Centers of Nanjing University and Collaborative Innovation Center of Advanced Microstructures and Collaborative Innovation Center of Solid-State Lighting and Energy-Saving Electronics.

Author information

Authors and Affiliations



Y.W. designed and guided this project. W. Zhang, Z.Z., Z.W., and M.H. are responsible for the plan and implementation of the experimental work. Y.L., W. Zhao, and S.L. are responsible for the calculation studies. Y.W., X.W., Y.L., Y. Zhu, Y. Zheng, and Y.P. co-wrote the manuscript, analyzed the data, discussed the results, and commented on the manuscript.

Corresponding authors

Correspondence to Yi Wang, Yong Liang or Yi Zhu.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Zhang, W., Zou, Z., Zhao, W. et al. Integrated redox-active reagents for photoinduced regio- and stereoselective fluorocarboborylation. Nat Commun 11, 2572 (2020).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing