Due to ultra-high reactivity, direct determination of free radicals, especially hydroxyl radical (•OH) with ultra-short lifetime, by field-effect transistor (FET) sensors remains a challenge, which hampers evaluating the role that free radical plays in physiological and pathological processes. Here, we develop a •OH FET sensor with a graphene channel functionalized by metal ion indicators. At the electrolyte/graphene interface, highly reactive •OH cuts the cysteamine to release the metal ions, resulting in surface charge de-doping and a current response. By this inner-cutting strategy, the •OH is selectively detected with a concentration down to 10−9 M. Quantitative metal ion doping enables modulation of the device sensitivity and a quasi-quantitative detection of •OH generated in aqueous solution or from living cells. Owing to its high sensitivity, selectivity, real-time label-free response, capability for quasi-quantitative detection and user-friendly portable feature, it is valuable in biological research, human health, environmental monitoring, etc.
Detection of the free radical is of great importance for human health, as the free radical is generally believed to play important roles in the pathogenesis of various human diseases1. For instance, overproduced reactive oxygen species (ROS) cause oxidative stress through the oxidation of biomolecules, such as lipids, proteins, and DNA, in cells and tissues1,2. Among them, hydroxyl radical (•OH), as one of the most reactive chemical species known, induces large aggression to human health due to its ultra-high reactivity with various biological species compared with other ROS3,4,5. The •OH can damage the bases of DNA and mediate redox alteration of cell-membrane Ca2+ channels. Therefore, the fast and real-time monitoring strategies for physiologically important free radicals, especially the •OH, is of great significance. Till now, analytical methods are still the bottleneck for progress in understanding physiological and pathological events such as aging, cancer, ischemia/reperfusion injury, traumatic brain injury, etc.1,6,7. In order to understand the role that free radical plays in biological and pathological events, much attention has been paid on monitoring the free radicals in living systems. Traditionally, the free radical is detected by electron spin resonance (ESR) spectroscopy8, fluorescence spectroscopy9,10,11, chromatography12,13, and electrochemical approaches14. However, these techniques suffer from some of the disadvantages such as costly instrumentation, low throughput, complicated sample preparation, need for well-trained operators, or lack of portability. Moreover, these techniques normally require spin traps or fluorescent probes, which introduce additional contaminations that are involved in the detection system and interfere with the desired signals8,9,10,11,12,13,14. The spin traps or fluorescent probes determine the detection limit and selectivity. In some cases, the detection limit of •OH is only 10−6 M (fluorescence)9,11, while ROS such as •O2− and •HO2 can also induce a response in the fluorescence or ESR signal10,15. Therefore, it is still a challenge to real-time monitor the free radicals with high sensitivity and selectivity by a low-cost, portable, and user-friendly analytical platform.
As a promising detection technique, field-effect transistor (FET)-based sensor works by transducing and monitoring the absorbate-induced perturbations into the conductance change in the channel materials, typically in terms of the source-drain current16,17. The channel material with high surface-to-volume ratio is favorable generally since it implies higher adsorption site density available18. Owing to its high carrier mobility and atomic thickness, graphene bears ultra-high sensitivity to electrical perturbations from the external environment17,19,20,21,22, which has been integrated into FET sensors with advantages such as label-free detection, high stability, flexibility, fast response, biological compatibility, and user-friendship23, compared with other detection techniques. In a graphene-based FET sensor, the graphene is normally surface functionalized, and the specific interaction between the functional group and the analyte allows the selective detection of the pH24, DNA25, RNA26, living cells27,28, gas29, metal ions30,31,32, etc. Although the free radical has a strong doping effect to graphene33,34, it is still challenging to directly monitor the free radical in the aqueous environment by the FET sensors. One pioneering work35 develops a poly(3-hexylthiophene) FET sensor functionalized with rutin. The oxidation of rutin by superoxide (•O2−) induces current perturbations and enables the detection of •O2−. However, compared with •O2− or other ROS, the highly reactive •OH has ultra-short lifetime. The lifetime of •OH is around 3 × 10−6 s36, 6 orders of magnitude shorter than that of •O2− (~1 s)37. Considering the ultra-short lifetime and the relatively low rate constant of the oxidation reaction (i.e., 1.5 × 106 M−1 s−1 for the reaction between •O2− and rutin)38, the •OH is easy to convert to H2O2 or other ROS without reaction with the functional groups. Till now, a FET sensor that can monitor highly reactive free radicals like •OH is still absent. Moreover, besides the pH value, quantitative analysis of the chemicals is difficult for a FET sensor, hampering its practical applications, especially in the bio-system.
Herein we develop a FET sensor that can selectively detect highly reactive free radicals. The FET sensor has a graphene channel functionalized with metal ion indicators via cysteamine as the inner connector. Owing to the ultra-fast reaction between •OH and thiol derivatives (rate constant: ~1010 M−1 s−1), the cysteamine can be selectively cut by the •OH despite of its ultra-short lifetime39,40,41. At the electrolyte/graphene interface, metal ions are released from graphene, leading to a surface charge de-doping and a current response in the channel. Thus, by monitoring the current perturbations induced by the metal ions, the inner-cutting strategy enables indirect detection of •OH with a concentration down to 10−9 M. The label-free real-time detection has high selectivity to •OH over metal ions or other ROS interferents. The sensitivity can be easily tuned by modifying the graphene channel with different amounts of metal ions, and then quasi-quantitative detection of •OH is realized when measuring the sample by using FET sensors with different sensitivities. As an application, the FET sensors were used in quasi-quantitative detection of •OH generated from Hela cells, showing great potential of the inner-cutting strategy for practical applications in monitoring free radicals or other analytes with ultra-high reactivity and ultra-short lifetime.
Device fabrication and the •OH detection
The fabrication procedure of the FET sensor is schematically shown in Fig. 1a. Briefly, a monolayer graphene produced by chemical vapor deposition (CVD; Supplementary Note 1) is transferred onto a SiO2/Si substrate, where graphene acts as the sensing channel, SiO2 as the gate dielectric, and Si as the back gate. Raman spectrum (Fig. 1b) shows a tiny D peak, a strong and sharp 2D peak compared with the G peak, indicating the high quality and the monolayer nature of the graphene. And then Cr/Au (5/50 nm thickness) is patterned on graphene by photolithography as the electrodes. Au nanoparticles (NPs) are deposited onto the graphene channel by vacuum evaporation and thermal annealing (step i). The resulting channel is denoted as graphene/Au. Field-emission scanning electron microscopic (FESEM) and transmission electron microscopic (TEM) images reveal that the Au NPs are uniformly distributed on the graphene surface without agglomeration (Fig. 1c, Supplementary Fig. 1). Atomic force microscopic (AFM) images show that the height of the Au NPs is around 4 nm (Supplementary Fig. 2a). The van-der-Waals binding between Au NPs and graphene is strong enough to retain Au NPs in place even after several cycles of washing and drying. After that, the device is submerged in 10−3 M cysteamine solution in order to assemble a monolayer of cysteamine on Au NPs (graphene/Au/Cys) through Au−S bonds (step ii). Finally, protoporphyrin IX (PP) is immobilized on the cysteamine (graphene/Au/Cys-PP) (step iii). The corresponding AFM image shows that the height of the Au NPs increases to around 6 nm (Supplementary Fig. 2b), indicating the successful modification of Cys-PP onto Au NPs. To characterize the chemical structure, the sample is measured by X-ray photoelectron spectroscopy (XPS, Fig. 1d–f) after each step. Au 4f7/2 and Au 4f5/2 peaks located at about 82.7 and 86.4 eV appear after step i, which are ascribed to Au NPs on the graphene. S 2p (164.2 eV) and N 1s (400.4 eV) peaks appear after step ii, indicating immobilization of cysteamine onto graphene/Au. A slight increase of N 1s peak and decrease of S 2p are observed after step iii. The result implies the successful assembly of PP, since PP contains high proportion of N without S. In contrast, Cys-PP cannot be directly linked to graphene surface as no N 1s or S 2p peaks appear on bare graphene after step iii (Supplementary Fig. 3). Moreover, an obvious peak at 403 nm appears in ultraviolet-visible (UV-vis) absorption spectrum after step iii, confirming that the PP is successfully modified on the channel (Supplementary Fig. 4).
To obtain a solution-based FET sensor (Figs. 1g and 2a, b), a chamber is fabricated on the channel, which is employed for all solution-based measurements. The electrodes are located beside the chamber with channel length around 8 mm. After dipping in 1 × 10−5 M Cd2+ aqueous solution, Cd2+ ions are bound to the channel surface to charge-dope graphene (Fig. 2c) (graphene/Au/Cys-PP-Cd2+)42,43. In the process, the drain-source current (Ids) rapidly decreases upon successive addition of Cd2+. After coordination with Cd2+ (step iv), the Ids of the graphene/Au/Cys-PP-Cd2+ channel (Fig. 2d) shows a rapid response upon exposure to 1 × 10−4 M •OH within 2 s (step v), thus the graphene/Au/Cys-PP-Cd2+ FET works as a real-time label-free •OH sensor. The current changes (Supplementary Fig. 5) are detectable even when the concentration of •OH decreases to 10−7 M.
The complexity of biological systems presents a great challenge in selective detection of •OH. The selectivity of the graphene/Au/Cys-PP-Cd2+ FET sensor is evaluated by monitoring the current signals induced by metal ions (Fig. 2e) and other potential interferents (Fig. 2f) that may coexist in biological systems. The low response to metal ions is an indication of high quality of the graphene44,45,46, as no binding with ions is expected and the pristine graphene is intrinsically insensitive to outside metal ions or pH variance owing to the ideal surface with pure saturated carbon bonds. When exposed to possible ROS interferents, such as H2O2, a little current change is observed. The negligible response (<10%) upon the same concentration of metal ions or ROS over •OH suggests the high selectivity of the present sensor for detecting •OH against metal ions and other coexisting biological molecules. Moreover, the storage stability of the graphene/Au/Cys-PP-Cd2+ FET sensor is investigated by monitoring the current response to 10−4 M •OH three times daily after storage in a refrigerator, and the current response when adding 10−4 M •OH still retains >94.5% of its initial response after 1 week of storage (Supplementary Fig. 6).
Besides Cd2+, other metal ions such as Zn2+ and Mg2+, which can coordinate with PP, are also used as indicators to modify the graphene/Au/Cys-PP FET device, thus the biological compatibility can be improved as a result of avoiding the usage of heavy metal ions. Considering the small leakage current with a fluctuation around 1 nA (<0.0005% of the Ids) in 0.01× phosphate-buffered saline (PBS; Supplementary Fig. 7), the interdigital electrodes (50 μm channel length, Fig. 3a) can directly be used as the source-drain electrodes in the FET sensor. Owing to the small channel length, an improved sensitivity is achieved and the current response can still be detectable after modifying the graphene/Au/Cys-PP FET device with 10−4 M Cd2+, 10−4 M Zn2+, or 10−4 M Mg2+, when the concentration of •OH decreases to 10−9 M (Fig. 3a, Supplementary Figs. 8 and 9).
Free radical detection mechanism
FET is a device in which a gate electric field controls the current flow through the conducting channel47. When operating in solution, the gate electric field can be applied via the electrolyte/semiconductor interface, where an electrical double-layer exists that enables fast device response and low voltage operation20. Figure 1g shows the output curves of a graphene/Au/Cys-PP FET device at different back-gate voltages (Vbg). The linear nature of the Ids versus drain-source voltage (Vds) curve reveals an ideal Ohmic contact between the channel and the electrode, and such reliable contact provides the possibility of the application in sensitive sensors. The Ohmic contact remains at different Vbg, suggesting that the current changes are mainly affected by the electrostatic gate doping effect, rather than the contact resistance. The Ids versus liquid gate voltage (Vlg) (liquid gate transfer curve, Vds = 50 mV, Fig. 2b) shows that the FET device has an ambipolar property. The Dirac point of the pristine graphene is located at around 540 mV and the Ids increases by about 360 μA when negatively increasing Vlg from 540 to −400 mV. Owing to the chemical doping effect, the Dirac point shifts to around 650 mV after modification with Au NPs and Cys-PP. Near zero gate voltage, the graphene/Au/Cys-PP channel shows a typical p-type behavior. Therefore, real-time responses in this study are measured in the p-type region.
The FET sensor is the combination of a sensor and an amplifier, in which a small potential alteration may induce a pronounced change of channel current16,48. The sensing process takes place at the electrolyte/semiconductor interface. The binding of charged species or the charge transfer at the interface lead to a variation of charge or electric potential of the conducting channel, in a way similar to applying an external potential to the gate electrode in a conventional FET device, leading to electrical conductivity changes associated with the analyte in real time16,48. Graphene combines extremely high charge mobility with atomic thickness, all the charge carriers in graphene flow solely on the surface and expose directly to the sensing environment, and thus the electrical property of graphene after appropriate modification is highly sensitive to the minute specific electrochemical perturbations imposed by the surrounding environment in solution. However, some free radicals like •OH have high reactivity and ultra-short lifetime. The lifetime of •OH is only around 3 × 10−6 s36, orders of magnitude shorter than normal free radicals like •O2− (~1 s in aqueous solution)37, •NO (0.09 to >2 s)49, etc. The •OH is easy to convert to H2O2 or other ROS without arising current responses in the channel. Thus it is still difficult to directly monitor the highly reactive free radicals like •OH in the aqueous environment, although these radicals have a doping effect to graphene33,34. The control experiment also shows that no critical changes in the current are detected (Fig. 2g), when successively adding 1 × 10−4 M •OH on a pristine graphene FET device.
To solve this problem, an inner-cutting strategy (Fig. 2a) is developed to achieve an indirect label-free detection of •OH. The graphene channel is functionalized with metal ions via Au-S bonds of the cysteamine. The •OH reacts with thiol derivatives with rate constant in the range of 109–1010 M−1 S−1, >4 orders of magnitude faster than other ROS, such as H2O2 (0.9 M−1 S−1)5 and •O2− (104–105 M−1 S−1)50. After the reaction, the XPS spectra of the graphene/Au/Cys-PP-Cd2+ (Fig. 1d–f) show that the Au 4f peaks maintain while the S 2p and N 1s peaks disappear, indicating successful cutting of Cys-PP-Cd2+ from Au NPs. Thus the ultra-fast reaction enables selective cut of the cysteamine by •OH and releases metal ions in spite of the ultra-short lifetime of •OH, leading to a controllable surface charge doping or de-doping of the graphene. Figure 2c and Supplementary Figs. 10 and 11 display the real-time responses of the graphene/Au/Cys-PP FET device during a cumulative addition of Cd2+ or Zn2+. The current decreases with increasing metal ion concentration and reaches saturation until the concentration increase to ~10−4 M. The Dirac point of the graphene/Au/Cys-PP FET negatively shifts by 420 mV after modification in 10−4 M Cd2+ (Fig. 2b), which is attributed to the coordination reaction of Cd2+ with the PP on the graphene channel. The corresponding charge density of the bonded Cd2+ is estimated to be 0.1 nm−2 (Supplementary Note 2). Considering the fact that the distance between Cd2+ and graphene is within the Debye length (Supplementary Note 3)51, the positive electrical field of the bonded Cd2+ forces the positively charged holes away from the electrolyte/graphene interface owing to the electrostatic gating effect. Thus it decreases the hole concentration in the graphene sheet and leads to negative current response of the graphene/Au/Cys-PP FET device31,52. When the •OH is added into the electrolyte by Fenton reaction, the self-assembled monolayer of cysteamine is destroyed by the highly reactive •OH, leading to release of metal ions from the electrolyte/graphene interface. Owing to surface charge de-doping, the current recovers (Figs. 2d and 3a, Supplementary Figs. 8 and 9), and the Dirac point of the graphene/Au/Cys-PP-Cd2+ FET positively shifts by 57 mV upon addition of 10−4 M •OH (Fig. 2b), thus the •OH radicals are indirectly detected. The device exhibits ultrahigh sensitivity to the concentration change of the metal ions. Remarkable response is obtained even when the concentration change of Cd2+ decreases to 10−10 M (Supplementary Fig. 14). The sensitivity of the graphene/Au/Cys-PP FET to the concentration change of Cd2+ is among the highest values of graphene-based FET metal ion sensors17,19,20,21,22,30,31,32, which brings the possibility of the indirect detection of •OH with high sensitivity.
To prove the inner-cutting mechanism, we measured the graphene/Au/Cys-PP-Cd2+ FET, the graphene/Au/Cys-PP-Zn2+ FET, and the graphene/Au/Cys-PP-Mg2+ FET upon successive addition of 2 × 10−4 M •OH. Both the liquid gate transfer curves and the back gate transfer curve (Fig. 3b, Supplementary Figs. 12 and 13) gradually shift positively and the current reaches saturation until the •OH concentration increases to ~10−3 M (Fig. 3c). Percentage change in Ids (ΔI/I0) increases stepwise at each concentration. Figure 3d shows ΔI/I0 plotted as a function of the •OH concentration from 10−9 to 10−3 M, which can be described by the Hill–Langmuir equation19,53,54:
where (ΔI/I0)max is the saturated value of the ΔI/I0, C•OH is the •OH concentration, and KD is a constant related to the ability of the •OH to cut the Au-S bonds. The KD value is extracted from the fitted curve to be about 9.95 μM, indicating the relatively high reactivity between •OH and Au-S bonds.
The selective detection of •OH is attributed to its high reactivity among the ROS. The redox potential of •OH is 2.31 V, higher than other ROS such as •O2− (0.94 V), H2O2 (0.32 V), and ROO• (0.77 V)5. The redox potential is defined compared with H2/H+ to represent the affinity of a substance for electrons. Higher potential means larger inclination to obtain electrons and stronger oxidizability, thus the cysteamine is inclined to react with •OH rather than other ROS. This, as well as higher reaction rate constant of •OH with the cysteamine compared with other ROS, gives rise to selective reaction of •OH and cysteamine and endows the FET sensor with fast response and high selectivity (Fig. 2e, f).
Non-linear response of the current to different concentrations of •OH (Fig. 3c, d) indicates that the graphene/Au/Cys-PP-metal ion FET, similar to other FET sensors19,20,21,22, cannot be directly used in quantitatively monitoring the •OH. However, the high controllability of the surface charge doping by metal ions allows a quasi-quantitative detection. Figure 4 shows the real-time current response to different concentrations of •OH, after exposing the graphene/Au/Cys-PP FET devices to aqueous solutions with 10−4, 10−5, or 10−6 M Cd2+, respectively. 10−4 M •OH is detectable when the device has been exposed to 10−6 M Cd2+ (Fig. 4a), while the detectable concentration decreases to 10−7 M •OH after exposing the device to 10−4 M Cd2+ (Fig. 4c). The increased •OH sensitivity should be attributed to the enhanced surface doping or de-doping effect. It is because that, after exposure in high concentration metal ions, more positively charged metal ions are bonded on the graphene surface. As a result, when a certain concentration of •OH is added, more metal ions are released from the electrolyte/graphene interface and larger current response is expected. Therefore, the sensitivity of the •OH FET can be tuned by the amount of surface-bonded metal ions.
The quasi-quantitative detection is achieved by monitoring the •OH using FET sensors with different sensitivities. For instance, two graphene/Au/Cys-PP FET devices are exposed in 10−5 M (Fig. 4d) and 10−4 M Cd2+ (Fig. 4e), respectively, resulting in FET sensors with different •OH sensitivities. When adding 10−5 M •OH solution onto the devices, the sensors exhibit different real-time responses (Fig. 4f). The current of the device exposed in 10−4 M Cd2+ varies by ~4%. According to the result in Fig. 4c, the •OH concentration should be ≥10−5 M. In the case of the device exposed in 10−5 M Cd2+, the current response is <1%. The •OH concentration should be ≤10−5 M. Therefore, the •OH concentration should be at a level of 10−5 M, and a quasi-quantitative detection is realized with the aid of controllable surface charge doping by metal ions.
Detection of •OH produced by living cells
The •OH plays an important role in the living system. As an application, the FET sensors are used for real-time detection of •OH produced by living cells within hours (Fig. 5a). Considering the bio-compatibility, Zn2+ was used as the indicator in the sensor. Hela cells were cultured on the surface of the graphene/Au/Cys-PP-Zn2+ FET sensor with interdigital source-drain electrodes (Fig. 5b, Supplementary Fig. 15). In the testing, lipopolysaccharide (LPS, 10 μg mL−1) was added as a stimulus to induce oxidative stress for the production of ROS within the Hela cells9. To verify the intercellular generation of ROS, the cells are incubated in 2′,7′-dichlorodihydrofluorescein diacetate (DCFH-DA) solution, which functions as the fluorescent probe for •OH. The probe is monitored by confocal microscopy upon 488 nm excitation. From the overlay image of the confocal fluorescence image and bright-field image (Fig. 5b–d), it is clear that the •OH has been generated in the Hela cells. As a comparison, no fluorescence (Supplementary Fig. 16) is observed without addition of LPS. Owing to the ultra-short lifetime, the intercellular •OH is hard to directly penetrate the cell membrane before converting to other kinds of ROS (i.e., H2O2, •O2−)5. Stable ROS (i.e., H2O2, •O2−) can penetrate the cell membrane, reach the solution environment5, and generate the extracellular •OH radicals. As a result, the graphene/Au/Cys-PP-Zn2+ FET device (modified by 10−4 M Zn2+) has a response in Ids when the Hela cells are stimulated by LPS (Fig. 5e). The Ids sharply increases in the first 1000 s and then maintains with a total change of current percentage of about 0.18%, in agreement with the response curve measured by other detection method10. When adding 1% dimethyl sulfoxide as the •OH scavenger, the total change of Ids reduces to about 0.03 %, indicating the current signal is mainly from the •OH. Without addition of LPS or using the pristine graphene as the channel, no change of the Ids is observed.
Quasi-quantitative detection of the •OH generated from the Hela cells is realized by using the FET sensors modified with different amount of Zn2+. The real-time current response to different concentrations of •OH (Supplementary Fig. 17) shows that the FET sensor (modified by 10−5 M Zn2+) has a small change of Ids when exposing in 10−7 M •OH, while no response is observed in the case of the FET sensor modified by 10−6 M Zn2+. According to this result, the current response of different FET sensors upon the addition of 10 μg mL−1 LPS indicates the extracellular •OH concentration is at a level of ~10−7 M. This amount is lower than the intracellular concentration (10−6 M) measured by other methods9,10,11, in correspondence with the fact that the extracellular •OH originates from other ROS released from the cells and the production of •OH is relatively low (i.e., the rate constant of H2O2 + •O2− → •OH + OH− + O2 is around 1.3 M−1 s−1, <40–80 M−1 s−1 of Fenton reaction)55,56.
In this article, we realize the detection of •OH by an inner-cutting graphene FET sensor. Highly reactive •OH cuts the cysteamine to release Cd2+ from the electrolyte/graphene interface, leading to charge de-doping of the graphene channel. This, as well as the high carrier mobility and atomic thickness of graphene, result in high sensitivity of the FET sensor. By this strategy, •OH with a concentration down to 10−9 M is detectable, comparable or higher than some of the conventional free radical detection techniques (i.e., 10−6 M •OH for fluorescence spectroscopy)9,11. The inner-cutting strategy can not only monitor •OH but also has the potential to detect other types of highly reactive free radicals. Compared with other detection technologies like ESR spectroscopy and fluorescence spectroscopy, the inner-cutting graphene FET sensor is a portable and user-friendly analytical platform that realizes label-free real-time detection with both high selectivity and sensitivity. More importantly, based on the controllable charge doping and de-doping by metal ions, the •OH generated from the Hela cells can be quasi-quantitatively measured by using the graphene/Au/Cys-PP-Zn2+ FET sensors with different amount of Zn2+ dopant, indicating that the FET sensor is compatible with living system when non-heavy metal ions are used as the indicator, and the figure of merit still maintains when detecting in living system since 10−7 M extracellular •OH can be readily detected. This work extends the application of FET sensors in monitoring highly reactive free radical and realizes a real-time quasi-quantitative detection in living environment. Such a portable and user-friendly free radical FET sensor has great potential for practical applications in biological research, human health, environmental monitoring, etc.
Fabrication of the FET sensor
A monolayer graphene film was produced by CVD (Supplementary Note 1) and transferred onto a clean SiO2/Si substrate to fabricate a FET device by photolithography. The device was thermally annealed to improve the contacts between graphene and electrodes (50 nm Au/5 nm Cr), and then Au NPs were deposited onto graphene by vacuum evaporation (Covap, Angstrom Corp.) and thermal annealing at 200 °C for 30 min. The resulting graphene/Au NPs was submerged in 10−2 M cysteamine (Sigma-Aldrich) solution. The assembly of cysteamine on Au NPs was kept overnight at room temperature, followed by rinsing with ethanol for several times to remove extra cysteamine. The cysteamine-modified device was immersed in 10−5 M PP (Sigma-Aldrich) and N,N-dimethylformamide (DMF) solution for 15 h, by adding 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (Sigma-Aldrich) and N-hydroxysuccinimide (Sigma-Aldrich) as the catalysts. The resulting FET sensor, with immobilized PP, was rinsed with DMF, acetone, ethanol, and distilled water in sequence to remove extra residues. The graphene/Au/Cys-PP was dipped in Cd2+, Zn2+, or Mg2+ solution for 6 h before tests. Owing to the coordination reaction with PP, Cd2+, Zn2+, or Mg2+ was bound to the surface of FET to charge-dope graphene. A solution chamber, which was employed in all solution-based measurements, was fabricated by a three-dimensional printer.
The samples were measured by XPS (Perkin-Elmer PHI5300 with 250 W Mg Kα source), Raman (HORIBA XploRA, 532 nm layer), FESEM (Zeiss Ultra 55, acceleration voltage: 5 kV), TEM (Tecnai G2 F20 S-Twin, acceleration voltage: 200 kV), AFM (XE7, Parks System), and optical microscope (BH2, Olympus). The UV-vis absorption spectra (Lambda 750) were measured from the fluorine-doped tin oxide (FTO)-coated glass. The FTO-coated glass was thoroughly cleaned by sonication in the soapy water, ethanol, and 1.0 M KOH solution, followed by a rinse with doubly distilled water, and then it was dried with pure nitrogen stream and treated by the modification processes as graphene.
The electrical signal was measured by a semiconductor parameter analyzer (Keysight, B1500A) and a probe station (Everbeing, PE-4) at room temperature in air. The •OH was generated through Fenton reaction by H2O2 and Fe2+ (H2O2/Fe2+ = 6:1). The electrolyte was 10−4 M PBS (0.01 × PBS, pH 7.2–7.4). All the aqueous solutions were prepared using distilled water with a resistivity of 18.2 MΩ cm. Ag/AgCl reference electrode was used as the liquid gate electrode. The Vgs was set lower than ±0.8 V (versus Ag/AgCl) and the Vds was set to 50 mV to avoid any electrochemical reaction on the electrodes.
Detection of the •OH generated by Hela cell
Hela cells were cultured on the FET sensors (Supplementary Note 4). The fluorescent images were captured by a laser confocal microscope (A42, Nikon) using 2 × 10−6 M DCFH-DA as the fluorescent probe. The device was immersed in 0.01 × PBS to keep the cells in good status and stored in a small culture dish for the measurement. Electrical measurement was performed by a semiconductor parameter analyzer (Keysight, B1500A) and a probe station (Everbeing, PE-4) without applying Vlg or Vbg. After the Ids became stable for 1000 s (Vds = 50 mV), the electrolyte solution was quickly changed to 10 μg mL−1 LPS (0.01 × PBS) solution. The real-time Ids was recorded for 4500 s in air.
The data that support the findings of this study are available from the corresponding author upon request.
Halliwell, B. & Gutteridge, J. M. C. Free Radicals in Biology and Medicine (Oxford University Press, Oxford, 1999).
Sonntag, C. V. Free-Radical-induced DNA Damage and its Repair (Springer, Berlin, 2006).
Dickinson, B. C. & Chang, C. J. Chemistry and biology of reactive oxygen species in signaling or stress responses. Nat. Chem. Biol. 7, 504–511 (2011).
Giorgio, M., Trinei, M., Migliaccio, E. & Pelicci, P. G. Hydrogen peroxide: a metabolic by-product or a common mediator of ageing signals. Nat. Rev. Mol. Cell Biol. 8, 722–728 (2007).
Winterbourn, C. C. Reconciling the chemistry and biology of reactive oxygen species. Nat. Chem. Biol. 4, 278–286 (2008).
Black, H. S. Reassessment of a free radical theory of cancer with emphasis on ultraviolet carcinogenesis. Integr. Cancer Ther. 3, 279–293 (2004).
Ganea, G. M., Kolic, P. E., El-Zahab, B. & Warner, I. M. Ratiometric coumarin-neutral red nanoprobe for detection of hydroxyl radicals. Anal. Chem. 83, 2576–2581 (2011).
Timmins, G. S., Liu, K. J., Bechara, E. J. H., Kotake, Y. & Swartz, H. M. Trapping of free radicals with direct in vivo EPR detection: a comparison of 5,5-dimethyl-1-pyrroline-N-oxide and 5-diethoxyphosphoryl-5-methyl-1-pyrroline-N-oxide as spin traps for HO• and SO4•−. Free Radic. Biol. Med. 27, 329–333 (1999).
Zhuang, M., Ding, C. Q., Zhu, A. W. & Tian, Y. Ratiometric fluorescence probe for monitoring hydroxyl radical in live cells based on gold nanoclusters. Anal. Chem. 86, 1829–1836 (2014).
Lee, H., Lee, K., Kim, I.-K. & Park, T. G. Fluorescent gold nanoprobe sensitive to intracellular reactive oxygen species. Adv. Funct. Mater. 19, 1884–1890 (2009).
Zhao, Q. et al. Ratiometric fluorescent silicon quantum dots–Ce6 Ccomplex probe for the live cell imaging of highly reactive oxygen species. ACS Appl. Mater. Interfaces 9, 2052–2058 (2017).
Luo, X. & Lehotay, D. C. Determination of hydroxyl radicals using salicylate as a trapping agent by gas chromatography-mass spectrometry. Clin. Biochem. 30, 41–46 (1997).
Kilinc, E. Determination of the hydroxyl radical by its adduct formation with phenol and liquid chromatography/electrochemical detection. Talanta 65, 876–881 (2005).
Zhu, A. W., Liu, Y., Rui, Q. & Tian, Y. Selective and sensitive determination of hydroxyl radicals generated from living cells through an electrochemical impedance method. Chem. Commun. 47, 4279–4281 (2011).
Harbour, J. R., Chow, V. & Bolton, J. R. An electron spin resonance study of the spin adducts of OH and HO2 radicals with nitrones in the ultraviolet photolysis of aqueous hydrogen peroxide solutions. Can. J. Chem. 52, 3549–3553 (1974).
Zhang, A. & Lieber, C. M. Nano-bioelectronics. Chem. Rev. 116, 215–257 (2016).
An, J. H., Park, S. J., Kwon, O. S., Bae, J. & Jang, J. High-performance flexible graphene aptasensor for mercury detection in mussels. ACS Nano 7, 10563–10571 (2013).
Lu, G. H., Ocola, L. E. & Chen, J. H. Reduced graphene oxide for room-temperature gas sensors. Nanotechnology. 20, 445502–445510 (2009).
Ohno, Y., Maehashi, K. & Matsumoto, K. Label-free biosensors based on aptamer-modified graphene field-effect transistors. J. Am. Chem. Soc. 132, 18012–18013 (2010).
Chen, F., Qing, Q., Xia, J., Li, J. & Tao, N. Electrochemical gate-controlled charge transport in graphene in ionic liquid and aqueous solution. J. Am. Chem. Soc. 131, 9908–9908 (2009).
Yu, C. et al. Ultrasensitive and selective sensing of heavy metal ions with modified graphene. Chem. Commun. 49, 6492–6494 (2013).
Jiang, S., Cheng, R., Ng, R., Huang, Y. & Duan, X. F. Highly sensitive detection of mercury(II) ions with few-layer molybdenum disulfide. Nano Res. 8, 257–262 (2015).
Schedin, F. et al. Detection of individual gas molecules adsorbed on graphene. Nat. Mater. 6, 652–655 (2007).
Ang, P. K., Chen, W., Wee, A. T. S. & Loh, K. P. Solution-gated epitaxial graphene as pH sensor. J. Am. Chem. Soc. 130, 14392–14393 (2008).
Cai, B. J. et al. Ultrasensitive label-free detection of PNA–DNA hybridization by reduced graphene oxide field-effect transistor biosensor. ACS Nano 3, 2632–2638 (2014).
Cai, B. J. et al. Gold nanoparticles-decorated graphene field-effect transistor biosensor for femtomolar MicroRNA detection. Biosens. Bioelectron. 74, 329–334 (2015).
Hess, L. H. et al. Graphene transistor arrays for recording action potentials from electrogenic cells. Adv. Mater. 23, 5045–5049 (2011).
Karni, C. T., Qing, Q., Li, Q., Fang, Y. & Lieber, C. M. Graphene and nanowire transistors for cellular interfaces and electrical recording. Nano Lett. 10, 1098–1102 (2010).
Kwon, O. S. et al. An ultrasensitive, selective, multiplexed superbioelectronic nose that mimics the human sense of smell. Nano Lett. 15, 6559 (2015).
Chen, K. H. et al. Hg(II) ion detection using thermally reduced graphene oxide decorated with functionalized gold nanoparticles. Anal. Chem. 84, 4057–4062 (2012).
Zhou, G. H. et al. Real-time, selective detection of Pb2+ in water using a reduced graphene oxide/gold nanoparticle field-effect transistor device. ACS Appl. Mater. Interfaces 6, 19235–19241 (2014).
Wang, C. Y. et al. A label-free and portable graphene FET aptasensor for children blood lead detection. Sci. Rep. 12, 1–8 (2016).
Choi, J., Lee, H., Kim, K.-J., Kim, B. & Kim, S. Chemical doping of epitaxial graphene by organic free radicals. J. Phys. Chem. Lett. 1, 505–509 (2010).
Zhang, L. et al. Photo-induced free radical modification of graphene. Small. 9, 114–1143 (2013).
Jeong, J. et al. Ultrasensitive detection of hazardous reactive oxygen species using flexible organic transistors with polyphenol-embedded conjugated polymer sensing layers. J. Hazard Mater. 355, 17–24 (2018).
Attri, P. et al. Generation mechanism of hydroxyl radical species and its lifetime prediction during the plasma-initiated ultraviolet (UV) photolysis. Sci. Rep. 5, 9332 (2015).
Zang, L. Y. & Misra, H. P. EPR kinetic studies of superoxide radicals generated during the autoxidation of l-methyl-4-phenyl-2,3-dihydropyridiniuma, a bioactivated intermediate of parkinsonian-inducing neurotoxin l-methyl-4-phenyl-l,2,3,6-tetrahydropyridin. J. Biol. Chem. 267, 23601–23608 (1992).
Taubert, D. et al. Reaction rate constants of superoxide scavenging by plant antioxidants. Free Radic. Biol. Med. 35, 1599–1607 (2003).
Quesada, A. R., Byrnes, R. W., Krezoski, S. O. & Petering, D. H. Direct reaction of H2O2with sulfhydryl groups in HL-60 cells: zinc-metallothionein and other sites. Arch. Biochem. Biophys. 334, 241–250 (1996).
Chen, T.-H., Nieh, C.-C., Shih, Y.-C., Ke, C.-Y. & Tseng, W.-L. Hydroxyl radical-induced etching of glutathione-capped gold nanoparticles to oligomeric AuI–thiolate complexes. RSC Adv. 5, 45158–45164 (2015).
Shiang, Y.-C., Huang, C.-C. & Chang, H.-T. Gold nanodot-based luminescent sensor for the detection of hydrogen peroxide and glucose. Chem. Commun. 23, 3437–3439 (2009).
Kilian, K. & Pyrzynska, K. Spectrophotometric study of Cd(II), Pb(II), Hg(II) and Zn(II) complexes with 5,10,15,20-tetrakis(4-carboxylphenyl)porphyrin. Talanta 60, 669–678 (2003).
Ishii, H., Satoh, K., Satoh, Y. & Koh, H. Spectrophotometric and analogue derivative spectrophotometric determination of ultramicro amounts of cadmium with cationic porphyrins. Talanta 29, 545–550 (1982).
Fu, W. et al. Graphene transistors are insensitive to pH changes in solution. Nano Lett. 11, 3597–3600 (2011).
Fu, W. et al. High mobility graphene ion-sensitive field-effect transistors by noncovalent functionalization. Nanoscale 5, 12104–12110 (2013).
Fu, W., Jiang, L., van Geest, E. P., Lima, L. M. C. & Schneider, G. F. Sensing at the surface of graphene field-effect transistors. Adv. Mater. 29, 1603610 (2017).
Wen, Y. G., Liu, Y. Q., Guo, Y. L., Yu, G. & Hu, W. P. Experimental techniques for the fabrication and characterization of organic thin films for field-effect transistors. Chem. Rev. 111, 3358–3406 (2011).
Buth, F., Kumar, D., Stutzmann, M. & Garrido, J. A. Electrolyte-gated organic field-effect transistors for sensing applications. Appl. Phys. Lett. 98, 153302 (2011).
Thomas, D. D., Liu, X., Kantrow, S. P. & Lancaster, J. R. Jr. The biological lifetime of nitric oxide: implications for the perivascular dynamics of NO and O2. Proc. Natl Acad. Sci. USA 98, 355–360 (2001).
Dikalov, S., Khramtsov, V. & Zimmer, G. Determination of rate constants of the reactions of thiols with superoxide radical by electron paramagnetic resonance: critical remarks on spectrophotometric approaches. Arch. Biochem. Biophys. 326, 207–218 (1996).
Stern, E. et al. Importance of the debye screening length on nanowire field effect transistor sensors. Nano Lett. 7, 3405–3409 (2007).
Fowler, J. D. et al. Practical chemical sensors from chemically derived graphene. ACS Nano 3, 301–306 (2009).
Ohno, Y., Maehashi, K., Yamashiro, Y. & Matsumoto, K. Electrolyte-gated graphene field-effect transistors for detecting pH and protein adsorption. Nano Lett. 9, 3318–3322 (2009).
Hao, Z. et al. Real-time monitoring of insulin using a graphene field-effect transistor aptameric nanosensor. ACS Appl. Mater. Interfaces 9, 27504–27511 (2017).
Weinstein, J. & Bielski, B. H. J. Kinetics of the interaction of HO2 and •O2 − with hydrogen peroxide the haber-weiss reaction. J. Am. Chem. Soc. 101, 58–62 (1979).
Xing, M. et al. Metal sulfides as excellent co-catalysts for H2O2 decomposition in advanced oxidation processes. Chem 4, 1359–1372 (2018).
This work was supported by the National Natural Science Foundation of China (51773041, 61890940, 21603038, 21544001), Shanghai Committee of Science and Technology in China (18ZR1404900), the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDB30000000), National Program for Thousand Young Talents of China, and Fudan University.
The authors declare no competing interests.
Journal peer review information: Nature Communications thanks Wangyang Fu and the other anonymous reviewer(s) for their contribution to the peer review of this work.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Wang, Z., Yi, K., Lin, Q. et al. Free radical sensors based on inner-cutting graphene field-effect transistors. Nat Commun 10, 1544 (2019). https://doi.org/10.1038/s41467-019-09573-4
A Robust Au−C≡C Functionalized Surface: Toward Real‐Time Mapping and Accurate Quantification of Fe 2+ in the Brains of Live AD Mouse Models
Angewandte Chemie International Edition (2020)
New water-soluble colorimetric pH and metal ione sensor based on graphene quantum dot modified with alizarine red S
Scientific Reports (2020)
Dynamic Detection of Endogenous Hydroxyl Radicals at Single-Cell Level with Individual Ag–Au Nanocages
Analytical Chemistry (2020)
Recent advances in ultrathin two-dimensional materials and biomedical applications for reactive oxygen species generation and scavenging
Dual-Aptamer Modified Graphene Field-Effect Transistor Nanosensor for Label-Free and Specific Detection of Hepatocellular Carcinoma-Derived Microvesicles
Analytical Chemistry (2020)