Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Fe-N system at high pressure reveals a compound featuring polymeric nitrogen chains


Poly-nitrogen compounds have been considered as potential high energy density materials for a long time due to the large number of energetic N–N or N=N bonds. In most cases high nitrogen content and stability at ambient conditions are mutually exclusive, thereby making the synthesis of such materials challenging. One way to stabilize such compounds is the application of high pressure. Here, through a direct reaction between Fe and N2 in a laser-heated diamond anvil cell, we synthesize three ironnitrogen compounds Fe3N2, FeN2 and FeN4. Their crystal structures are revealed by single-crystal synchrotron X-ray diffraction. Fe3N2, synthesized at 50 GPa, is isostructural to chromium carbide Cr3C2. FeN2 has a marcasite structure type and features covalently bonded dinitrogen units in its crystal structure. FeN4, synthesized at 106 GPa, features polymeric nitrogen chains of [N42−]n units. Based on results of structural studies and theoretical analysis, [N42−]n units in this compound reveal catena-poly[tetraz-1-ene-1,4-diyl] anions.


Since the discovery of a single-bonded cubic nitrogen polymorph (cg-N)1, many experimental and theoretical studies were dedicated to the search for high energy density nitrogen allotropes and nitrides2,3,4. Polymeric nitrogen solids have been regarded as the best high energy density materials (HEDMs)5,6,7 owing to the remarkable difference in the average bond energy between the single N–N bond (160 kJ mol−1), the double N=N bond (418 kJ mol−1), and the triple N≡N bond (945 kJ mol−1)8. A number of single-bonded nitrogen allotropes were predicted to exist at pressures higher than the synthesis pressure of cg-N9,10,11. However, in the absence of detailed structural information (e.g., single crystal data) about even those single-bonded nitrogen allotropes which were reported to exist1,10 any discussion regarding organization of chemical bonding in nitrogen-based HEDMs is difficult. Moreover, it is highly desired to synthesize and stabilize HEDMs at pressures significantly lower than 100 GPa, preferably close to ambient.

Numerous studies suggest that polymeric nitrogen networks may be stabilized at lower pressures in compounds4,12,13. Theoretical calculations predict existence of different polynitrides MNx (M = Li, Be, Na, Mg, Al, K, Ca, Ti, Cr, Rb, Ru, Cs, Hf, W, Re, Os x = 3-10)14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 featuring various polymeric nitrogen chains, N5 or N6 rings or even more complex nitrogen networks (e.g., planar N18 rings in KN823 or N10 rings in BeN417). The most straightforward experimental way to obtain these materials could be a direct reaction between a metal, a metal nitride or an azide and nitrogen at high-pressure high-temperature (HPHT) conditions. Previous experiments with metals or metal nitrides and nitrogen in a laser-heated diamond anvil cell led to the synthesis of a variety of transition metal pernitrides MN2 (M = Pt, Ir, Pd, Os, Rh, Ru, Co, Ti) with different structures: Pd and Pt pernitrides have the pyrite-type structure (cubic Pa-3)32,33, IrN2 – the baddelyite-type structure (monoclinic P21/c)33, and OsN2, RhN2, RuN2, CoN2—the marcasite-type structure (orthorhombic Pnnm)34,35,36,37 and TiN2—Al2Cu-type structure38. All of these pernitrides contain dinitrogen N–N units within their structures. Due to the strong covalent N–N bonding, many of these compounds possess exceptionally high bulk moduli suggesting potentially high hardness, which could be further enhanced, if more nitrogen would be incorporated into the structure31. For this reason many of the predicted MNx compounds are often considered not only as HEDMs, but also as possible ultra-hard low-compressible materials30,31.

In addition, extensive high-pressure investigations of alkali-metal azides (AN3, with A = Li, Na, K or Cs) also aimed at nitrogen polymerization39,40,41,42. However, unambiguous structural characterization of the obtained high-pressure phases is usually hindered, as they suffer of a lack of crystallinity. Laser heating of cesium azide in a diamond anvil cell (DAC) in the of excess N2 at 60 GPa led recently to the synthesis of a material interpreted as a cesium pentazolate salt CsN540. Shortly after this discovery the first pentazolate-containing complexes were isolated at ambient pressure43. This is a good example that information about chemistry and novel bonding of nitrogen at high-pressure may be useful for ambient-pressure synthesis.

The major challenge in the identification of products of HPHT synthesis is the absence of the information on both the chemical composition and the structure. The quality of powder X-ray diffraction data collected in DAC experiments in general is insufficient for solving the structure ab initio. Thus, interpretations of the results are often ambiguous and rely strongly on theoretical predictions.

Here, we overcame this methodological limitation mentioned above. We used laser-heated diamond anvil cells for the synthesis of ironnitrogen compounds through a direct reaction between iron and molecular nitrogen (see Methods for details). The reaction products were characterized using single-crystal X-ray diffraction, and this methodology was extended to over 130 GPa. We report three novel compounds, Fe3N2, FeN2, and FeN4. The crystal structure of FeN4 possesses polymeric nitrogen chains that are much desired for designing potential high energy density materials. Moreover, our experimental results and theoretical analysis revealed unexpectedly complex chemical bonding in the polymeric nitrogen chains.

Results and Discussion

Synthesis and crystal structure of Fe3N2

Laser heating of Fe foil in nitrogen medium at 50 GPa and 1900(200) K led to the formation of two nitrides Fe3N2 and FeN. Iron nitride Fe3N2 is isostructural to chromium carbide Cr3C244 (Fig. 1a). The structure is built of quadrilateral face-capped trigonal prisms NFe7, which are interconnected by sharing trigonal faces and edges. Such triangular prismatic coordination of six metal atoms about a central nonmetal atom with additional atoms situated outside the quadrilateral faces of the prism is very common for metal-rich compounds containing transition metals and elements with unfilled p levels45,46. After laser-heating at pressures above 50 GPa, this phase was no longer observed.

Fig. 1
figure 1

Crystal structures of ironnitrogen compounds. Orange and blue balls show the positions of Fe and N atoms, respectively. a Fe3N2 at 50 GPa. The structure is built of quadrilateral face-capped trigonal prisms NFe7, which are interconnected by sharing trigonal faces and edges. b FeN at 50 GPa with NiAs structure type. c FeN2 at 58 GPa; Shown are the FeN6 octahedra, which are connected into infinite chains through common edges and aligned along the c-axis. These chains are interconnected through common vertices. Additional linkage between FeN6 octahedra is provided via N–N bonds. d FeN4 at 135 GPa. In the structure of FeN4, each Fe atom is a member of two non-planar five-member Fe[N4] metallacycles, which are almost parallel to the (1-10) lattice plane. Nitrogen atoms form infinite zigzag chains, running along the c-direction

Synthesis and crystal structure of FeN

The phase with the chemical composition FeN and the B8 (NiAs) structure type (Fig. 1b) was observed at each pressure-temperature point (Table 1). Very recently, FeN was reported in three independent experimental studies. Clark et al. synthesized NiAs-type FeN by heating Fe2N in the nitrogen pressure-transmitting medium at ~12 GPa47, while Niwa et al. have obtained the same compound in a direct reaction between Fe and N2 at ~35 GPa37. Our experiments indicate that this compound has a wide stability range and in agreement with a recent study by Laniel et al48. On decompression, it is stable down to ambient pressure, but with time, it transforms to zincblende-structured FeN. The volume–pressure dependence for B8-FeN can be described with the third order Birch–Murnaghan equation of state with V0 = 34.03(1) Å3, K0 = 185(14) GPa, K0′ = 6.3(4) (Fig. 2a).

Table 1 Summary of the experimental points at which laser-heating was performed
Fig. 2
figure 2

Pressure dependence of the unit cell volume of ironnitrogen compounds. a FeN, b FeN2, and c FeN4. Solid curves show the fit of the Birch–Murnaghan equation of state to the experimental data. V0(FeN) = 34.03(1) Å3, K0(FeN) = 185(14) GPa, K0’(FeN) = 6.3(4); V0(FeN2) = 47.42 Å3, K0(FeN2) = 250(16) GPa, K0′(FeN2) = 4.0(5); V94.5(FeN4) = 29.94(4) Å3, K94.5(FeN4) = 603(22) GPa, K'94.5(FeN4) = 4.0 (fixed)

Synthesis and crystal structure of FeN2

The FeN2 phase was first observed after heating at ~58 GPa. Iron diazenides with different crystal structures (R\(\bar 3\)m and Pnnm) were predicted by ab initio calculations49,50. We indeed synthesized a phase with the marcasite structure type (space group Pnnm, Fig. 1c, Table 2). The structure of FeN2 can be described as consisting of chains of edge-sharing FeN6 octahedra aligned along the c-axis. These chains are interconnected through common vertices. Additional linkage between FeN6 octahedra is provided via N–N bonds (Fig. 1c). According to our structure refinement, the N–N distance at 58.5(5) GPa is 1.307(7) Å, and that is intermediate between the expected bond lengths for double and single-bonded dinitrogen units. For example, the N=N bond in [N2]2− ions in BaN2 is of 1.23 Å at ambient conditions51, whereas the calculated N–N bond lengths in [N2]4− in PtN2 and OsN2 at ambient conditions are 1.41 and 1.43 Å, respectively52,53.

Table 2 Crystallographic data for new iron Fe–N compounds synthesized in the present study at indicated pressures (full crystallographic information is provided in Supplementary Data 14)

The compressional behavior of MN2 compounds may give an insight on the oxidation state of the metal and on the bonding between nitrogen atoms. Since, the compression of dinitrides is primarily controlled by the compression of metal-nitrogen (M-N) bonds34,35,37, the dinitrides with weaker M-N bonds are expected to be more compressible. The strength of a M-N bond depends to a large extent on its ionicity. Therefore, the compressibility of M–N bonds should decrease in the following sequence: M2+–N > M3+–N > M4+–N. This trend is clearly demonstrated by the experimental and theoretical studies. Metals that cannot have oxidation state larger than +2 (Ba, Sr, Ca), form diazenides M2+[N=N]2− with the N=N distances in the range 1.2–1.24 Å54,55,56 and rather low bulk moduli (K0(SrN2) = 65 GPa, K0(BaN2) = 46 GPa)51. Metals that have stable oxidation states + 4 (Os, Ru, Ir, Ti, Pt) form pernitrides M4+[N–N]4− with N–N distances ~1.4 Å and are highly incompressible with very large bulk moduli (K0(OsN2) =362 GPa52, K0(IrN2) = 428 GPa57, K0(TiN2) = 385 GPa38, K0(PtN2) = 372 GPa32). Regarding the known pernitrides of those transition metals, that do not readily possess an oxidation state + 4 (Co, Rh), they have intermediate bulk moduli (K0(CoN2) = 216 GPa, K0(RhN2) = 235 GPa)35,37, suggesting the oxidation state of Co and Rh to be +3. According to our data, compressibility of FeN2 could be described with the 3rd order Birch-Murnaghan equation of state with K0 = 250(16) GPa, K0′ = 4.0(5), and V0 = 47.42 Å3 (Fig. 2b). Therefore, both refined N-N distances and compressibility suggest that Fe in FeN2 has an oxidation state + 3. The presence of [N2]3·− radical ions is not very likely (however, not excluded)56, and the electron count in FeN2 can be similar to that suggested for LaN2:51 Fe3+ + [N=N]2− + e, where the electron enters the conduction band.

Synthesis and crystal structure of FeN4

The synthesis of FeN4 was first performed at ~106 GPa by laser-heating in nitrogen medium of the mixture of FeN and FeN2, obtained before in the reaction between Fe and N2 at 60 GPa (Experiment #2 in Table 1). The synthesis of FeN4 was reproduced in the Experiment #3 by heating iron foil in nitrogen medium at 106 GPa. In the following discussion, we will always refer to the best-quality single-crystal XRD dataset, which was obtained at ~135 GPa. The indexing of the diffraction pattern resulted in the triclinic unit cell with the parameters a= 2.5089(4), b= 3.5245(13), c= 3.5409(5) Å, α = 105.08(2), β = 110.260(14), γ = 92.03(2)° (see Table 2, Supplementary Figs. 15 and Supplementary Data 4 for details). The crystal structure of the new phase was solved and refined resulting in the composition FeN4 (Figs. 1d, 3). In the structure of FeN4, six nitrogen atoms coordinate each iron atom in the following way: each Fe atom is a member of two non-planar five-member Fe[N4] metallacycles, which are almost parallel to the (1-10) lattice plane (Fig. 3a, b). Two more nitrogen atoms complete the distorted octahedral coordination of Fe (Fig. 3b). The most intriguing feature of the crystal structure is displayed by nitrogen atoms forming infinite zigzag chains, running along the c-direction (Figs. 1d, 3).

Fig. 3
figure 3

Fragments of the crystal structure of FeN4 at 135 GPa. a A fragment of the crystal structure parallel to the (1-10) lattice plane featuring polymeric zigzag N–N chains. Out-off –plane atoms are not shown. b The same fragment shown in a different projection. c A fragment of the crystal structure showing the coordination geometry of the nitrogen atoms. d The charge density map with zig-zag N–N chains in FeN4 structure. e A scheme of poly[tetraz-1-ene-1,4-diyl] anion. f A scheme of coordination of iron atoms by poly[tetraz-1-ene-1,4-diyl] anions

The geometry of the polymeric nitrogen chains gives an insight into the electron localization within the compound. The N1 atoms have only three neighboring atoms in planar triangular geometry, whereas N2 atoms have tetrahedral coordination (Fig. 3c). This directly suggests the sp2 hybridization of N1 atoms and sp3 hybridization of N2 atoms. Additionally, taking in account the N1–N1, N1–N2 and N2–N2 bond distances, which at 135 GPa equal 1.29(5), 1.30(3), and 1.43(4) Å, respectively one can classify the N1–N1 bonds as N=N double bonds, and the N1–N2 and N2–N2 bonds as the single bonds. Moreover, theoretical analysis (see below) also shows that double N1–N1 bonds have a significantly higher electron density between atoms than single N1–N2 and N2–N2 bonds (Fig. 3d). Therefore, the nitrogen chains in FeN4 can be considered as catena-poly[tetraz-1-ene-1,4-diyl] anions (Fig. 3e). The tetrazene unit \({\mathrm{N}}_4^{2 - }\), thus, serves as a dianionic ligand (Fig. 3e, f), which agrees with the description of Fe atoms in the formal oxidation state +2. The oxidation state +2 is also suggested by the results of Mössbauer spectroscopy (Supplementary Fig. 6). The coordination scheme of Fe atom in FeN4 perfectly matches the 18-electron rule (6 electrons of Fe2+ plus 12 electrons from ligands). An attempt to study FeN4 using Raman spectroscopy was not successful due to the strong fluorescence background (Supplementary Fig. 7).

To gain a deeper insight into the bonding features of FeN4, we have performed electronic structure calculations (see Methods). The Bader charge analysis, which shows the charge transfer of 0.37e to N2 atoms and 0.25e to N1 atoms, is in agreement with the proposed above bonding scheme. For understanding the dynamical stability of FeN4, the phonon dispersion relations were calculated at different volumes (Fig. 4). The vibrational frequencies throughout the Brillouin zone are all real, in agreement with the dynamic stability of the phase in the studied pressure range.

Fig. 4
figure 4

Phonon dispersion curves and phonon density of states of FeN4. Calculations were performed with U = 4.0 eV at different volumes, which correspond to pressures of 135 GPa (a), 95 GPa (b). and 0 GPa (c). The phonon density of states are calculated with 0.2 THz smearing

We were able to decompress the sample containing FeN4 obtained in the Experiment #3 down to 22.7(2) GPa (Supplementary Fig. 5); however, the crystal quality significantly decreased and it was not possible to collect a single-crystal diffraction dataset suitable for the reliable indexing and structure refinement below 94.5 GPa. The pressure dependence of the unit volume data (Fig. 2c) can be described with the second-order Birch–Murnaghan equation of state with the following parameters: K94.5 = 603(22) GPa, V94.5 = 29.94(4) Å3, where K94.5 and V94.5 are the bulk modulus and the unit cell volume at 94.5 GPa. The bulk modulus of FeN4 at 94.5 GPa is slightly smaller than that of FeN (K94.5(FeN) = 679 GPa). Although the attempt to recover FeN4 was unsuccessful, according to our calculations the compound should be dynamically stable even at ambient pressure (Fig. 4). Therefore, there is still a chance that FeN4 stabilization can be potentially achieved through low-temperature decompression.

Examples of transition metal complexes with tetraazadienes58, tetraaz-2-enes59 or hexazene60,61 ligands are known, and the longest cycle-containing chain has 11 N atoms in 1,1′-(triaz-1-ene-1,3-diyl)bis(1H-tetrazol-5-amine)62. However, we are unaware about the existence of linear nitrogen chains containing more than six nitrogen atoms, which have been reported hitherto. Interestingly, polytetrazene-type nitrogen chains were predicted to exist in the high-pressure phase with N2H stoichiometry, in BeN4 and in RuN417,28,63. In these chains, the ratio of the number of single to double N–N bonds (3:1) is the same as that we found in FeN4, however the structures are different. To the best of our knowledge, FeN4 is the first experimentally confirmed nitrogen compound with polymeric nitrogen chains.

To summarize, in the present work we synthesized a number of compounds in ironnitrogen system, solved and refined their crystal structures, and analyzed their chemical bonding. Our results contribute to both fundamental and applied science starting from fundamental understanding of nitrogen chemistry to the design of novel HEDMs. The first characterized poly-nitrogen compound is an important milestone for further theoretical and experimental studies. It is reasonable to suggest that compounds like FeN4 may exist in other metal-nitrogen systems and can be metastable down to ambient pressures. Such stabilizaiton can be potentially achieved through low-temperature decompression or through doping. The high synthetic pressure for FeN4 makes it hardly useful for any practical application as a HEDM at present, although its estimated volumetric energy density is 13–15.1 kJ cm−3 (see Supplementary Methods for details), which is higher than that of TNT (7.2–8.0 kJ cm−3), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) (10.1 kJ cm−3), and pentaerythritol tetranitrate (PETN) (10.6 kJ cm−3)25. However, the information about nitrogen bonding in this compound is important for further theoretical and experimental studies in the field.


Experiment #1

Three pieces of iron were loaded into a BX90 diamond anvil cell equipped with 250 µm Boehler–Almax diamonds. The cell was loaded with N2 as a pressure transmitting medium using the gas-loading system installed at the Bayerisches Geoinstitut. Ruby sphere was placed along with the iron pieces for pressure determination. Fe pieces were laser-heated in the DAC at 50, 60, and 70 GPa up to 1900, 2100, and 2200 K, respectively (Table 1) using the portable laser-heating system at the beamline P02.2 at PETRA III64. We should note here that generally, pressure in the sample chamber increases after laser heating. Therefore, we provide pressures before and after heating in the Table 1.

Experiments #2 and #3

A piece of iron was placed inside a 60 µm hole in a Re gasket, preindented to the thickness of 22 µm. The sample chamber was loaded with nitrogen, which served as a pressure-transmitting medium. We used BX90 diamond anvil cells equipped with Boehler–Almax type diamonds (culet diameter of 120 µm). In the Expreiment#2 the laser-heating was done at 60, 106, and 135 GPa. In the Experiment #3, the sample was first heated at 106.8 GPa. We have used the double-sided laser-heating system of the beamline ID18 of ESRF64. In the experiment #2, we have used 57Fe as a starting material.

X-ray diffraction

The samples were studied by means of single-crystal X-ray diffraction on the synchrotron beamlines P02.2 at DESY, Hamburg, Germany (λ = 0.2966 Å, Perkin Elmer XRD1621 flat panel detector); 13IDD at the advanced photon source (APS), Argonne, USA (MAR165 CCD detector, λ = 0.2952 Å) and ID27 at ESRF (λ = 0.3738 Å, Perkin Elmer XRD1621 flat panel detector). At each pressure step, we collected the X-ray diffraction images upon continuous rotation of the cell from –20° to + 20° ω. At selected pressure points, we collected the data with a narrow 0.5° scanning step in the range from −38° to +38° ω.

In the experiment #1 we determined pressure using the fluorescence line R1 of ruby. In the experiments #2 and #3 we determined pressures using the equations of state of hcp-Fe and/or Re.

Whereas the starting material, a polycrystalline iron foil, gives characteristic Debye-Scherer rings in the diffraction pattern, after the laser-heating in solidified nitrogen, we clearly observed well defined, sharp diffraction spots from multiple grains of new high-pressure phases. Using the EwaldPro reciprocal space viewing tool for the CrysAlisPro program65, we were able to identify the diffraction spots belonging to certain domains, find their orientation matrices and refine the unit cell parameters. The structures of the new phases were solved against single-crystal diffraction data. The general procedure of the analysis of a multigrain diffraction dataset is described in ref. 66. We provide several raw diffraction images with grain indexing examples in the Supplementary Figs. 14 and Supplementary Note 1. Further discussion regarding indexing solutions is given in the Peer Review file.

Diffraction data analysis (peak search, unit cell finding, data integration, frame scaling etc.) was performed with CrysAlisPro software. The crystal structures were solved using the computer program SHELXT that employs a dual-space algorithm for the solution of a phase problem67. General output of the structure solution program was a position of heavy iron atom, while nitrogen atoms were located based on the analysis of residual electron density maps. Crystal structures were refined against single-crystal diffraction data using the computer program JANA200668 (see Supplementary Data 19 for structural details). The obtained models represent the authors’ optimum refinement of the available X-ray data. The full diffraction data are made available online (see Data availability section). Their complexity for processing is obvious due to the reduced data to parameter ratio, which is characteristic for all single-crystal diffraction data sets obtained in a DAC, and due to the presence of diffraction from numerous domains. If improvements in data processing become available, one can use the present data for reevaluation.


The ab-initio calculations were performed using the supercell technique and all electron projector-augmented-wave (PAW) method69 as implemented in the VASP code70,71,72. The simulations were carried out using 4-atoms (B8-FeN), 5-atoms (FeN4) and 6-atoms periodic (FeN2) cells. The integration over the Brillouin zone is performed using the Gamma scheme with 29 × 29 × 29 k-point grids for B8-FeN and 18 × 18 × 18 k-point grids for FeN2 and FeN4 structures. Gaussian smearing method was chosen with a smearing width of 0.05 eV. The energy cutoff for the plane waves included in the expansion of wave functions was set to 500 eV. The convergence criterion for the electronic subsystem was chosen to be equal to 10−4 eV for two subsequent iterations, and the ionic relaxation loop within the conjugated gradient method was stopped when forces became of the order of 10-3 eV/Å.

The exchange-correlation energy was described using the Perdew–Wang-91 GGA functional73 augmented by including Hubbard-U corrections within the DFT + U method following the Dudarev’s approach74. The chosen parameters U = 4.0 eV and J = 1 eV for the Fe d states provide good agreement with the experimental structural characteristics for all simulated systems FeN, FeN2, and FeN4 structures (Fig. 2, Table 2). We found that FeN is magnetic and used ferromagnetic configuration in our simulations. FeN2, and FeN4 were found to be non-magnetic.

Bader charge analysis75 derived from topological consideration on the charge distribution was performed using the code developed by Henkelman and colleagues76 for 400 × 400 × 400 NG(X,Y,Z)F mesh. The phonon calculations were carried out at T = 0 K within quasi-harmonic approximation. We used a finite distortions approach implemented into the PHONOPY program77 combined with Quantum Espresso (QE)78 simulations. In the QE calculations, we used plane waves with kinetic energy up to 50 Ry for the electron wave functions while the augmented charges were described using 500 Ry energy cut-off. With these optimized parameters, we reproduced the results of static calculations obtained by VASP. Converged phonon dispersions were achieved using a (4 × 4 × 4) supercell with 320 atoms and (4 × 4 × 4) Monkhorst-Pack79 sampling of the Brillouin zone.

Data availability

The details of the crystal structure investigations may be obtained from FIZ Karlsruhe, 76344 Eggenstein-Leopoldshafen, Germany (fax: +49-7247-808-666; e-mail: on quoting the deposition numbers CSD-434274—434277. Single-crystal X-ray diffraction dataset for FeN4 at 135 GPa has been deposited to Figshare ( with the accession link The data that support the findings of this study are available from the corresponding author upon reasonable request.


  1. Eremets, M. I., Gavriliuk, A. G., Trojan, I. A., Dzivenko, D. A. & Boehler, R. Single-bonded cubic form of nitrogen. Nat. Mater. 3, 558–563 (2004).

    ADS  Article  PubMed  CAS  Google Scholar 

  2. Sun, W. et al. Thermodynamic routes to novel metastable nitrogen-rich nitrides. Chem. Mater. 29, 6936–6946 (2017).

    Article  CAS  Google Scholar 

  3. Zarko, V. E. Searching for ways to create energetic materials based on polynitrogen compounds (review). Combust. Explos. Shock Waves 46, 121–131 (2010).

    Article  Google Scholar 

  4. Zhang, L., Wang, Y., Lv, J. & Ma, Y. Materials discovery at high pressures. Nat. Rev. Mater. 2, 17005 (2017).

    ADS  Article  CAS  Google Scholar 

  5. Li, Y.-C. et al. 1,1′-Azobis-1,2,3-triazole: a high-nitrogen compound with stable N8 structure and photochromism. J. Am. Chem. Soc. 132, 12172–12173 (2010).

    Article  PubMed  CAS  Google Scholar 

  6. Qi, C. et al. A novel stable high-nitrogen energetic material: 4,4′-azobis(1,2,4-triazole). J. Mater. Chem. 21, 3221 (2011).

    Article  CAS  Google Scholar 

  7. Klapötke, T. M. & Piercey, D. G. 1,1′-Azobis(tetrazole): a highly energetic nitrogen-rich compound with a N10 chain. Inorg. Chem. 50, 2732–2734 (2011).

    Article  PubMed  CAS  Google Scholar 

  8. Luo, Y.-R. Comprehensive Handbook of Chemical Bond Energies. (CRC Press, Boca Raton 2007).

  9. Pickard, C. J. & Needs, R. J. High-pressure phases of nitrogen. Phys. Rev. Lett. 102, 1–4 (2009).

    Google Scholar 

  10. Wang, X. et al. Cagelike diamondoid nitrogen at high pressures. Phys. Rev. Lett. 109, 1–5 (2012).

    Google Scholar 

  11. Ma, Y., Oganov, A. R., Li, Z., Xie, Y. & Kotakoski, J. Novel high pressure structures of polymeric nitrogen. Phys. Rev. Lett. 102, 100–103 (2009).

    Google Scholar 

  12. Wang, H. et al. Nitrogen backbone oligomers. Sci. Rep. 5, 13239 (2015).

    ADS  Article  PubMed  PubMed Central  CAS  Google Scholar 

  13. Goncharov, A. F. et al. Backbone NxH compounds at high pressures. J. Chem. Phys. 142, 214308 (2015).

    ADS  Article  PubMed  CAS  Google Scholar 

  14. Prasad, D. L. V. K., Ashcroft, N. W. & Hoffmann, R. Evolving structural diversity and metallicity in compressed lithium azide. J. Phys. Chem. C 117, 20838–20846 (2013).

    Article  CAS  Google Scholar 

  15. Zhang, M., Yan, H., Wei, Q., Wang, H. & Wu, Z. Novel high-pressure phase with pseudo-benzene “N 6” molecule of LiN 3. Europhys. Lett. 101, 26004 (2013).

    ADS  Article  CAS  Google Scholar 

  16. Shen, Y. et al. Novel lithium-nitrogen compounds at ambient and high pressures. Sci. Rep. 5, 14204 (2015).

    ADS  Article  PubMed  PubMed Central  CAS  Google Scholar 

  17. Zhang, S., Zhao, Z., Liu, L. & Yang, G. Pressure-induced stable BeN4 as a high-energy density material. J. Power Sources 365, 155–161 (2017).

    ADS  Article  CAS  Google Scholar 

  18. Wei, S. et al. A novel polymerization of nitrogen in beryllium tetranitride at high pressure. J. Phys. Chem. C. 121, 9766–9772 (2017).

  19. Steele, B. A. & Oleynik, I. I. Sodium pentazolate: a nitrogen rich high energy density material. Chem. Phys. Lett. 643, 21–26 (2016).

    ADS  Article  CAS  Google Scholar 

  20. Yu, S. et al. Emergence of novel polynitrogen molecule-like species, covalent chains and layers in magnesium-nitrogen MgxNy phases under high pressure. J. Phys. Chem. C. 121, 11037–11046 (2017).

  21. Wei, S. et al. Alkaline-earth metal (Mg) polynitrides at high pressure as possible high-energy materials. J. Phys. Chem. Chem. Phys. 19, 9246–9252 (2017).

    Article  CAS  Google Scholar 

  22. Liu, Z. et al. Bonding properties of aluminum nitride at high pressure. Inorg. Chem. 56, 7494–7500 (2017).

    Article  PubMed  CAS  Google Scholar 

  23. Steele, B. A. & Oleynik, I. I. Novel potassium polynitrides at high pressures. J. Phys. Chem. A 121, 8955–8961 (2017).

    Article  PubMed  CAS  Google Scholar 

  24. Zhu, S. et al. Stable calcium nitrides at ambient and high pressures. Inorg. Chem. 55, 7550–7555 (2016).

    Article  PubMed  CAS  Google Scholar 

  25. Zhang, J., Oganov, A. R., Li, X. & Niu, H. Pressure-stabilized hafnium nitrides and their properties. Phys. Rev. B 95, 020103 (2017).

    ADS  Article  Google Scholar 

  26. Kvashnin, A. G., Oganov, A. R., Samtsevich, A. I. & Allahyari, Z. Computational search for novel hard chromium-based materials. J. Phys. Chem. Lett. 8, 755–764 (2017).

    Article  PubMed  CAS  Google Scholar 

  27. Wang, X. et al. Layered polymeric nitrogen in RbN3 at high pressures. Sci. Rep. 5, 16677 (2015).

    ADS  Article  PubMed  PubMed Central  Google Scholar 

  28. Zhang, Y. et al. Diverse ruthenium nitrides stabilized under pressure: a theoretical prediction. Sci. Rep. 6, 33506 (2016).

    ADS  Article  PubMed  PubMed Central  CAS  Google Scholar 

  29. Peng, F., Han, Y., Liu, H. & Yao, Y. Exotic stable cesium polynitrides at high pressure. Sci. Rep. 5, 16902 (2015).

    ADS  Article  PubMed  PubMed Central  CAS  Google Scholar 

  30. Aydin, S., Ciftci, Y. O. & Tatar, A. Superhard transition metal tetranitrides: XN4 (X=Re, Os, W). J. Mater. Res. 27, 1705–1715 (2012).

    ADS  Article  CAS  Google Scholar 

  31. Zhao, Z. et al. Nitrogen concentration driving the hardness of rhenium nitrides. Sci. Rep. 4, 4797 (2014).

    Article  PubMed  PubMed Central  Google Scholar 

  32. Crowhurst, J. C. et al. Synthesis and characterization of the nitrides of platinum and iridium. Science 311, 1275–1278 (2006).

    ADS  Article  PubMed  CAS  Google Scholar 

  33. Crowhurst, J. C. et al. Synthesis and characterization of nitrides of iridium and palladium. J. Mater. Res. 23, 1–5 (2008).

    ADS  Article  CAS  Google Scholar 

  34. Niwa, K. et al. Discovery of the last remaining binary platinum-group pernitride RuN2. Chemistry 20, 13885–13888 (2014).

    Article  PubMed  CAS  Google Scholar 

  35. Niwa, K. et al. High pressure synthesis of marcasite-type rhodium pernitride. Inorg. Chem. 53, 697–699 (2014).

    Article  PubMed  CAS  Google Scholar 

  36. Tse, J. S. et al. Structural phase transition in Ca H 2 at high pressures. Phys. Rev. B 75, 134108 (2007).

    ADS  Article  CAS  Google Scholar 

  37. Niwa, K. et al. Highly coordinated iron and cobalt nitrides synthesized at high pressures and high temperatures. Inorg. Chem. 56, 6410–6418 (2017).

    Article  PubMed  CAS  Google Scholar 

  38. Bhadram, V. S., Kim, D. Y. & Strobel, T. A. High-pressure synthesis and characterization of incompressible titanium pernitride. Chem. Mater. 28, 1616–1620 (2016).

    Article  CAS  Google Scholar 

  39. Eremets, M. I. et al. Polymerization of nitrogen in sodium azide. J. Chem. Phys. 120, 10618–10623 (2004).

    ADS  Article  PubMed  CAS  Google Scholar 

  40. Steele, B. A. et al. High-pressure synthesis of a pentazolate salt. Chem. Mater. 29, 735–741 (2017).

    Article  CAS  Google Scholar 

  41. Medvedev, S. A. et al. Phase stability of lithium azide at pressures up to 60 GPa. J. Phys. Condens. Matter 21, 195404–195405 (2009).

    ADS  Article  PubMed  CAS  Google Scholar 

  42. Hou, D. et al. Series of phase transitions in cesium azide under high pressure studied by in situ x-ray diffraction. Phys. Rev. B - Condens. Matter Mater. Phys. 84, 1–7 (2011).

    Google Scholar 

  43. Zhang, C., Sun, C., Hu, B., Yu, C. & Lu, M. Synthesis and characterization of the pentazolate anion cyclo –N5 in (N5)6(H3O)3(NH4)4Cl. Science 355, 374–376 (2017).

    ADS  Article  PubMed  CAS  Google Scholar 

  44. Glaser, J., Schmitt, R. & Meyer, H. J. Neue Strukturverfeinerung und Eigenschaften von Cr3C2. Z. Naturforsch. 58, 929–933 (2003).

    CAS  Article  Google Scholar 

  45. Rundqvist, S. & Runnsjö, G. Crystal structure refinement of Cr3C2. Acta Chem. Scand. 23, 1191–1199 (1969).

    Article  CAS  Google Scholar 

  46. Lundström, T., Folkmarson, L., Olofsson, B. & Nielsen, P. H. The crystal structure of Hf3P2. Acta Chem. Scand. 22, 2191–2199 (1968).

    Article  Google Scholar 

  47. Clark, W. P. et al. High-pressure NiAs-type modification of FeN. Angew. Chem. Int. Ed. 56, 7302–7306 (2017).

    Article  CAS  Google Scholar 

  48. Laniel, D., Dewaele, A., Anzellini, S. & Guignot, N. Study of the iron nitride FeN into the megabar regime. J. Alloy. Compd. 733, 53–58 (2018).

    Article  CAS  Google Scholar 

  49. Wessel, M. & Dronskowski, R. A new phase in the binary iron nitrogen system? The prediction of iron pernitride, FeN2. Chemistry 17, 2598–2603 (2011).

    Article  PubMed  CAS  Google Scholar 

  50. Wang, Z. et al. Prediction and characterization of the marcasite phase of iron pernitride under high pressure. J. Alloy. Compd. 702, 132–137 (2017).

    Article  CAS  Google Scholar 

  51. Wessel, M. & Dronskowski, R. Nature of N–N bonding within high-pressure noble-metal pernitrides and the prediction of lanthanum pernitride. J. Am. Chem. Soc. 132, 2421–2429 (2010).

    Article  PubMed  CAS  Google Scholar 

  52. Chen, Z. W. et al. Crystal structure and physical properties of OsN2 and PtN2 in the marcasite phase. Phys. Rev. B - Condens. Matter Mater. Phys. 75, 1–4 (2007).

    ADS  Google Scholar 

  53. Montoya, J. A., Hernandez, A. D., Sanloup, C., Gregoryanz, E. & Scandolo, S. OsN2: crystal structure and electronic properties. Appl. Phys. Lett. 90, 2005–2008 (2007).

    Article  CAS  Google Scholar 

  54. Vajenine, G. V. et al. Preparation, crystal structure, and properties of barium pernitride, BaN2. Inorg. Chem. 40, 4866–4870 (2001).

    Article  PubMed  CAS  Google Scholar 

  55. Auffermann, G., Prots, Y. & Kniep, R. SrN and SrN2: diazenides by synthesis under High N2-pressure. Angew. Chem. Int. Ed. 40, 547–549 (2001).

    Article  CAS  Google Scholar 

  56. Schneider, S. B. et al. High-pressure synthesis and characterization of Li2Ca3[N2]3—an uncommon metallic diazenide with [N2]2− ions. J. Am. Chem. Soc. 135, 16668–16679 (2013).

    Article  PubMed  CAS  Google Scholar 

  57. Young, A. F. et al. Synthesis of novel transition metal nitrides IrN2 and OsN2. Phys. Rev. Lett. 96, 1–4 (2006).

    Article  CAS  Google Scholar 

  58. Doedens, R. J. Molecular configuration of (Me)2N4Fe(CO)3, a tetrazadiene–tricarbonyliron complex. Chem. Commun. 1950, 1271–1272 (1968).

    Google Scholar 

  59. Vaddypally, S., McKendry, I. G., Tomlinson, W., Hooper, J. P. & Zdilla, M. J. Electronic structure of manganese complexes of the redox-non-innocent tetrazene ligand and evidence for the metal-azide/imido cycloaddition intermediate. Chemistry 22, 10548–10557 (2016).

    Article  PubMed  CAS  Google Scholar 

  60. Gondzik, S. et al. Reactions of a Zn(I) complex with group 14 azides—formation of zinc azide and zinc hexazene complexes. Chem. Commun. 50, 927–929 (2014).

    Article  CAS  Google Scholar 

  61. Bellow, J. A., Martin, P. D., Lord, R. L. & Groysman, S. Reductive coupling of azides mediated by an iron(II) bis(alkoxide) complex. Inorg. Chem. 52, 12335–12337 (2013).

    Article  PubMed  CAS  Google Scholar 

  62. Tang, Y. et al. Synthesis and characterization of a stable, catenated N11 energetic salt. Angew. Chem. Int. Ed. 52, 4875–4877 (2013).

    Article  CAS  Google Scholar 

  63. Yin, K., Wang, Y., Liu, H., Peng, F. & Zhang, L. N. 2H: a novel polymeric hydronitrogen as a high energy density material. J. Mater. Chem. A 3, 4188–4194 (2015).

    Article  CAS  Google Scholar 

  64. Kupenko, I. et al. Portable double-sided laser-heating system for Mössbauer spectroscopy and X-ray diffraction experiments at synchrotron facilities with diamond anvil cells. Rev. Sci. Instrum. 83, 124501 (2012).

    ADS  Article  PubMed  CAS  Google Scholar 

  65. CrysAlisPro Software system, version Rigaku Corporation, Oxford, UK (2015).

  66. Bykova, E. Single-crystal X-ray Diffraction at Extreme Conditions in Mineral Physics and Material Sciences. Doctoral thesis, University of Bayreuth (2015).

  67. Sheldrick, G. M. SHELXT—Integrated space-group and crystal-structure determination. Acta Crystallogr. Sect. A Found. Adv. 71, 3–8 (2015).

    Article  MATH  CAS  Google Scholar 

  68. Petricek, V., Dusek, M. & Palatinus, L. Crystallographic computing system JANA2006: general features. Z. für Krist. 229, 345–352 (2014).

    CAS  Google Scholar 

  69. Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953–17979 (1994).

    ADS  Article  Google Scholar 

  70. Kresse, G. & Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 6, 15–50 (1996).

    Article  CAS  Google Scholar 

  71. Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).

    ADS  Article  CAS  Google Scholar 

  72. Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758–1775 (1999).

    ADS  Article  CAS  Google Scholar 

  73. Perdew, J. P. & Wang, Y. Accurate and simple analytic representation of the electron-gas correlation energy. Phys. Rev. B 45, 13244–13249 (1992).

    ADS  Article  CAS  Google Scholar 

  74. Dudarev, S. L., Botton, G. A., Savrasov, S. Y., Humphreys, C. J. & Sutton, A. P. Electron-energy-loss spectra and the structural stability of nickel oxide: an LSDA+U study. Phys. Rev. B 57, 1505–1509 (1998).

    ADS  Article  CAS  Google Scholar 

  75. Bader, R. F. W. Atoms in Molecules: A Quantum Theory. (Clarendon Press, Oxford 1994).

  76. Sanville, E., Kenny, S. D., Smith, R. & Henkelman, G. Improved grid-based algorithm for Bader charge allocation. J. Comput. Chem. 28, 899–908 (2007).

    Article  PubMed  CAS  Google Scholar 

  77. Togo, A. & Tanaka, I. First principles phonon calculations in materials science. Scr. Mater. 108, 1–5 (2015).

    Article  CAS  Google Scholar 

  78. Giannozzi, P. et al. QUANTUM ESPRESSO: a modular and open-source software project for quantum simulations of materials. J. Phys. Condens. Matter 21, 395502 (2009).

    Article  PubMed  Google Scholar 

  79. Monkhorst, H. J. & Pack, J. D. Special points for Brillouin-zone integrations. Phys. Rev. B 13, 5188–5192 (1976).

    ADS  MathSciNet  Article  Google Scholar 

  80. Akahama, Y. & Kawamura, H. Pressure calibration of diamond anvil Raman gauge to 310 GPa. J. Appl. Phys. 100, 043516 (2006).

    ADS  Article  CAS  Google Scholar 

Download references


Parts of this research were carried out at the beamline P02.2 at DESY, a member of the Helmholtz Association (HGF). Portions of this work were performed at GeoSoilEnviroCARS (The University of Chicago, Sector 13), Advanced Photon Source (APS), Argonne National Laboratory. GeoSoilEnviroCARS is supported by the National Science Foundation—Earth Sciences (EAR—1634415) and Department of Energy- GeoSciences (DE-FG02-94ER14466). This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. We acknowledge the European Synchrotron Radiation Facility for provision of synchrotron radiation facilities (beamlines ID18 and ID27). N.D. and L.D. thank the Deutsche Forschungsgemeinschaft (DFG projects DU 954-11/1 and DU 393-10/1) and the Federal Ministry of Education and Research, Germany (BMBF, Grant No. 5K16WC1) for financial support. F.T. and I.A.A are grateful to the support provided by the Swedish Research Council project No 2015-04391 and the VINN Excellence Center Functional Nanoscale Materials (FunMat-2) Grant 2016-05156. Support from the Swedish Government Strategic Research Areas in Materials Science on Functional Materials at Linköping University (Faculty Grant SFO-Mat-LiU No 2009-00971) and the Swedish e-Science Research Centre (SeRC) is gratefully acknowledged. Theoretical analysis of structural properties was supported by the Ministry of Education and Science of the Russian Federation (Grant No. 14.Y26.31.0005). Simulations of the electronic structure were supported by the Ministry of Education and Science of the Russian Federation in the framework of Increase Competitiveness Program of NUST “MISIS” (No. K2-2017-080) implemented by a governmental decree dated 16 March 2013, No. 211. Calculations have been carried out at the Swedish National Infrastructure for Computing (SNIC) and at computer cluster at NUST “MISIS”. Analysis of the charge density distribution was supported by the RFBR research project No 16-02-00797

Author information

Authors and Affiliations



M.B, L.D, N.D., and I.A. wrote the manuscript, M.B., E.B., G.A., E.K., K.G., I.C., M.M., V.P. and H.P.L. performed the experiments, M.B. analyzed and interpreted the diffraction data, I.K. and C. McC. performed and interpreted Mössbauer experiments, F.T., A.P. and I.A. performed the calculations.

Corresponding author

Correspondence to M. Bykov.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Bykov, M., Bykova, E., Aprilis, G. et al. Fe-N system at high pressure reveals a compound featuring polymeric nitrogen chains. Nat Commun 9, 2756 (2018).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing