Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Spectroscopy of bulk and few-layer superconducting NbSe2 with van der Waals tunnel junctions


Tunnel junctions, an established platform for high resolution spectroscopy of superconductors, require defect-free insulating barriers; however, oxides, the most common barrier, can only grow on a limited selection of materials. We show that van der Waals tunnel barriers, fabricated by exfoliation and transfer of layered semiconductors, sustain stable currents with strong suppression of sub-gap tunneling. This allows us to measure the spectra of bulk (20 nm) and ultrathin (3- and 4-layer) NbSe2 devices at 70 mK. These exhibit two distinct superconducting gaps, the larger of which decreases monotonically with thickness and critical temperature. The spectra are analyzed using a two-band model incorporating depairing. In the bulk, the smaller gap exhibits strong depairing in in-plane magnetic fields, consistent with high out-of-plane Fermi velocity. In the few-layer devices, the large gap exhibits negligible depairing, consistent with out-of-plane spin locking due to Ising spin–orbit coupling. In the 3-layer device, the large gap persists beyond the Pauli limit.


Superconductors of the transition metal dichalcogenide (TMD) family have seen a revival of interest subsequent to developments in device fabrication by mechanical exfoliation1,2,3,4,5,6,7. The isolation of ultrathin NbSe21,2 has yielded indications of a Berezinskii–Kosterlitz–Thouless transition, which occurs in 2D superconductors. NbSe21, gated MoS25,6, and gated WS27 devices also remain superconducting in in-plane magnetic fields well beyond the Pauli limit \(H_{\mathrm{p}} = {{\Delta /}}\left( {\sqrt g \mu _{\mathrm{B}}} \right)\)8,9. (Here, Δ is the superconducting energy gap, g is the Landé g-factor and μB the Bohr magneton.) This is likely due to Ising spin-orbit coupling (ISOC): The broken inversion symmetry of the monolayer TMD in the plane is expected to lead to the formation of Cooper pairs whose constituent spins are locked in the out-of-plane direction, in a singlet configuration. Interestingly, zero-resistance states have been observed in parallel magnetic fields exceeding the Pauli limit even in few-layer devices, where inversion symmetry is recovered1. This suggests that the inter-layer coupling is not strong enough to overcome the out-of-plane spin-locking due to ISOC, perhaps in part due to the presence of spin-layer locking10.

These previous studies1,2,3,4,5,6,7 used in-plane electronic transport at high magnetic field and temperatures close to the critical temperature, Tc(H = 0), to determine the upper critical field Hc2||, which depends on the magnitude of the spin-orbit field HSO. Tunneling spectroscopy can provide complementary information. For example, tunneling and other probes (see ref.11 and references therein) suggest that bulk NbSe2 is a 2-band superconductor. The role of both bands in ultra-thin devices, and their response to magnetic field, can be addressed by tunnel spectroscopy but not by electronic transport (which addresses the condensate) or heat conductivity measurements12. The latter, specifically, would be shorted by the substrate. Tunneling can also probe the effect of magnetic field at the full temperature range and in fields ranging from zero to Hc2||.

To carry out tunneling measurements on devices of variable thickness, at variable magnetic field conditions, it is necessary to develop a device-based architecture suitable for integration with TMDs. Oxide-based tunnel barriers, such as those used since the days of Giaever13, have now reached technological maturity; however, there is a limited number of oxides which form high-quality insulating, non-magnetic barriers, and they do not grow well on all surfaces. It is therefore of interest to explore alternatives based on van der Waals (vdW) materials14, ultrathin layers of which can be precisely positioned on many surfaces15. Indeed, such barriers have proven effective when integrated with graphene16,17,18 and appear to be promising candidates for integration with TMD superconductors19.

In this work we study tunneling devices utilizing ultrathin TMDs as barriers. We find that these devices exhibit a hard gap with strong sub-gap conductance suppression. In the spectra of bulk NbSe2, we clearly resolve the presence of two superconducting order parameters, which exhibit a distinct evolution upon application of in-plane magnetic fields. Spectra of ultrathin NbSe2 are stable against the application of magnetic fields, even beyond the Pauli limit8,9.


Hard gap van-der-Waals tunnel junctions

We fabricate Normal-Insulator-Superconductor (NIS) tunnel junctions with either MoS2 or WSe2—both van der Waals (vdW) materials—as the insulating barrier. The barrier material is placed on top of 2H-NbSe2 (hereafter NbSe2), a vdW superconductor with bulk Tc ≈ 7.2 K, using the ‘dry transfer’ fabrication technique14,15. Crucially, such heterostructures can comprise NbSe2 flakes of varying thicknesses, from bulk (6 layers) to few-layer, often within a single device. Figure 1a shows a typical junction consisting of a 20 nm-thick NbSe2 flake partially covered by a 4–5 layer thick MoS2 barrier (cf. Supplementary Note 1 and Supplementary Fig. 1). The junction has an area A = 1.6 μm2, and we evaluate its transparency to be \({\cal T}\sim 10^{ - 8}\) (Supplementary Note 2 and Supplementary Fig. 2). Figure 1b shows the differential conductance G = dI/dV as a function of V obtained with the device, at T = 70 mK. This spectrum has two striking features: first, the very low sub-gap conductance (G0RN ≈ 1/500), which indicates all bands crossing the Fermi energy are fully gapped. Second, the intricate structure of the quasiparticle peak differs from a standard BCS density-of-states (DOS) by having a relatively low peak and a shoulder at lower energies. The latter feature can be clearly seen in the second derivative (Fig. 1c) where the slope separates into a double peak feature, similar to STS scans of bulk NbSe211,20. Based on this, the flake can be considered bulk in terms of the zero field superconducting properties, and is hence referred to as the bulk sample.

Fig. 1
figure 1

Differential conductance of a bulk NbSe2 tunnel device. a Optical image of the tunnel junction device. The yellow-green flake is a 50–20 nm thick NbSe2 (20 nm at the source electrode) and the purple-blue flake is a 4–5 layer MoS2. Au electrodes are deposited on the left to serve as ohmic contacts (yellow) and on the right to serve as tunnel electrodes (purple). b dI/dvs. V as measured on the device shown in a (black) and a fit to the SSM model (red, see details in the text, all fit parameters are given in Supplementary Note 3 and Supplementary Table 1). c d2I/dV2 of the data in b, and the fit to the SSM model. d Simulated \(\left| {{\rm d}^2I{\mathrm{/}}{\rm d}V^2} \right|\) as a function of bias voltage and in-plane magnetic field, in the modified SSM model including a field dependent depairing parameter \({{\Gamma }}_{\mathrm{1}}^{{\mathrm{AG}}} = 0.05 \left( {\frac{{H_{||}}}{{1{\kern 1pt} {\mathrm{T}}}}} \right)^2\) meV, \({{\Gamma }}_{\mathrm{2}}^{{\mathrm{AG}}} = 0.64 \left( {\frac{{H_{||}}}{{1{\kern 1pt} {\mathrm{T}}}}} \right)^2\) meV e, measured \(\left| {{\rm d}^2I{\mathrm{/}}\mathrm{d}V^2} \right|\) as a function of in-plane field and voltage bias. The black solid lines follow the positions of the peaks as calculated from the model shown in d. The black dashed lines track position of the quasiparticle peak in field, given by d2I/dV2 = 0. The average slope of these lines is 0.27 meV T−1

Two-band model

Density functional theory calculations21, and ARPES data22 show that five independent electronic bands cross the Fermi energy in NbSe2. Of these, four are Nb-derived bands with roughly cylindrical Fermi surfaces, centered at the Γ and K points. The fifth is derived from the Se pz orbitals, which give rise to a small ellipsoid pocket around the Γ point. Ref. 11 uses a two-band model to fit NbSe2 tunneling data, which can be justified noting that the Se and Nb-derived bands differ in the density of states and value of the electron-phonon coupling parameter23. We follow ref.11 in fitting our data using the same two-band model, which was developed in various forms by Suhl24, Schopohl25, and McMillan26 (below “SSM”).

The model entails a self-consistent solution to the coupled equations for the energy dependent order parameters Δ i (E) in the two bands i:

$${{\Delta }}_i(E) = \frac{{{{\Delta }}_i^0 + {{\Gamma }}_{ij}{{\Delta }}_j(E){\mathrm{/}}\sqrt {{{\Delta }}_j^2(E) - E^2} }}{{1 + {{\Gamma }}_{ij}{\mathrm{/}}\sqrt {{{\Delta }}_j^2(E) - E^2} + {{\Gamma }}_i^{{\mathrm{AG}}}{\mathrm{/}}\sqrt {{{\Delta }}_i^2(E) - E^2} }}$$

\({{\Delta }}_i^0\) describes the intrinsic gap within each band i, that is generated by the electron-phonon coupling and by the scattering rates of quasiparticles between the bands Γ ij . The extension of the two-band model to include Abrikosov-Gor’kov depairing27,28,29,30—via the terms with \({{\Gamma }}_i^{{\mathrm{AG}}}\)—was done by Kaiser and Zuckermann31. Here, depairing is due to magnetic field; thus, \({{\Gamma }}_i^{{\mathrm{AG}}}\) are set to 0 when no magnetic field is applied. The DOS of each band is then given by

$$N_i(E) = N_i(E_{\mathrm{F}})\frac{1}{{2\pi }}{\int} \mathrm{d}\theta \Re \frac{{\left| E \right|}}{{\sqrt {(1 + \alpha {\kern 1pt} {\mathrm{cos}}{\kern 1pt} \theta ){{\Delta }}_i^2(E) - E^2} }},$$

where N i (EF) is the DOS at the Fermi energy in the normal state in band i. The parameter α = 0.1, incorporates band-anisotropy. This anisotropy also affects the effective fit temperature (T = 0.44 K), which is higher than the sample temperature. Our fit indicates the presence of two independent order parameters. The larger, \({{\Delta }}_1^0 = 1.26 \pm 0.01{\kern 1pt} {\mathrm{meV}}\) can be determined with high fidelity. The smaller order parameter \(\Delta _2^0\), cannot be determined unambiguously, and could have any value between 0 and 0.3 meV. The suppressed intrinsic superconductivity in the second band is consistent with a band with small density of states and weak electron–phonon coupling. The Se-band, having these properties23, is thus a candidate for the 2nd band.

NbSe2 in in-plane magnetic field: diffusive vs. ballistic regimes

We next investigate the evolution of the tunneling spectra vs. in-plane magnetic field H|| (model—Fig. 1d, data—Fig. 1e). The bulk sample appearing in Fig. 1 is thick enough to accommodate Meissner currents leading to orbital depairing. We track the peaks in d2I/dV2, which are associated with the two gaps. The high energy peak in d2I/dV2 depends weakly on the field, whereas the low energy peak evolves nonlinearly towards lower energies. This trend persists up to H = 0.5 T which we interpret as Hc1. Bulk NbSe2 is regarded as a clean-limit superconductor (coherence length ξ < l mean free path). This condition, however, might not hold equally for both bands, since the smaller gap is associated with a larger ξ. Indeed, the evolution of the low energy gap in H|| does not agree with the relevant, Doppler shift model32,33,34. Instead, the magnetic field evolution of its d2I/dV2 features towards lower energies is well-reproduced by the diffusive Kaiser-Zuckermann (KZ) model (Fig. 1d), assuming a depairing parameter \({{\Gamma }}_2^{{\mathrm{AG}}}\) quadratic in H||. For a thin sample of thickness dλ, \({{\Gamma }}_i^{{\mathrm{AG}}} = D_ie^2H_{||}^2d^2{\mathrm{/}}6\hbar c^2\)35, with D i the diffusion coefficient, d ≈ 20 nm and the penetration length λ ≈ 230 nm36. We find \({{\Gamma }}_2^{{\mathrm{AG}}}\) = 640 μeV at 1 T, corresponding to D2 = 40 cm2 s−1. The model therefore yields a very large value for the diffusion coefficient D2 = vFl/3, indicating a large Fermi velocity. This lends further support to the identification of this feature with the Se-derived band, where vF is 4–5 times larger than in the Nb-derived bands23. In contrast, the high energy quasiparticle peak moves only slightly and linearly to higher energies at low H|| (dashed line in Fig. 1e). From this, we estimate vF ≈ 5 × 104 m s−1. This indicates that a comprehensive description of the field evolution of the full spectrum of bulk NbSe2 would require a model with arbitrary disorder bridging clean and diffusive limits.

Reduced gap in ultra-thin NbSe2

Our methods allow us to carry out a straightforward comparison of the tunneling spectra from devices with different NbSe2 thicknesses. Figure 2a shows differential conductance curves taken by tunneling into ultra-thin NbSe2 flakes (3 layers, 4 layers), in comparison to the dI/dV of the bulk flake discussed above. The spectra of the thin devices are in good agreement with the SSM model (fits are shown in Supplementary Fig. 3, fit parameters are given in Supplementary Table 1). We extract the values of \({{\Delta }}_1^0\) from these fits, and separately evaluate Tc using the temperature dependence of the tunneling conductance (details in Supplementary Fig. 4). We find that \({{\Delta }}_1^0\) increases with Tc (Fig. 2b), however, deviating slightly from the BCS result Δ = 1.76kBTc. This deviation is plausible due to the multi-band nature of superconductivity in NbSe2. The Tc values measured here are lower than those reported elsewhere1,37, likely due to higher disorder in our sample38,39,40. Note that, based on ref.37, it would seem that the Tc dependence on number of layers seen by all works to date is not due to strain or other substrate effects.

Fig. 2
figure 2

Thickness dependent tunneling spectrum. a Normalized differential conductance of vdW tunnel junctions with NbSe2 of varying thickness: 20 nm thick (bulk, orange), 4 layers (red) and 3 layers (blue). Each curve is fit to the SSM model (fit parameters reported in Supplementary Note 3).b \({{\Delta }}_1^0\) of the devices in a, extracted from the SSM model, as a function of Tc. Solid line shows a comparison to the BCS prediction: Δ = 1.76KBTc. Tc is defined by a 5% reduction of the zero bias conductance relative to the normal conductance of the junctions. The error bars result from the measured hysteresis

Ultra-thin NbSe2 in magnetic field

We now turn to the response of the ultrathin devices to in-plane magnetic fields. Figure 2 shows the tunneling spectra for the bulk device (Fig. 2a) and for the 4-layer and 3-layer devices (Fig. 2b and c, respectively). The KZ model, for all 3 devices, is shown in Fig. 2d–f, respectively. In the thin devices, unlike the bulk device, we find that the spectrum changes very little up to 3.5 T (which is the maximal field where a compensation coil keeps a zero perpendicular field). In both 3- and 4-layer devices, there is a small reduction in the height of the quasiparticle peak; in the 3-layer device, the low energy spectrum exhibits a more intricate evolution (discussed below). Thinner samples have shorter scattering lengths and longer coherence lengths, and should thus be closer to the diffusive limit. Indeed, the KZ model fits our data well, and we use it to quantify the reduction of the peak height of the 3- and 4-layer devices (Fig. 2e, f), finding that the depairing term \({{\Gamma }}_1^{{\mathrm{AG}}} \approx 0.5\) μeV at 1 T (all model parameters are given in Supplementary Table 2).

Since orbital depairing is quadratic in sample thickness, we expect it to be diminished in the 3- and 4-layer devices, allowing us to probe the spin-dependent interaction. The interaction of the spin with magnetic field should lead to Zeeman splitting of the spectrum, which we do not see. This could be due to two mechanisms. First, spin–orbit scattering can effectively randomize the spin, giving rise to a depairing parameter given by \({{\Gamma }}^{{\mathrm{AG}}} = \tau _{{\mathrm{SO}}}e^2\hbar H_{||}^2{\mathrm{/}}2m^2\),where τSO is the spin orbit scattering time35. Second, ISOC can align the spins in the out-of-plane direction with an effective field, HSO, and the depairing term \({{\Gamma }}^{{\mathrm{AG}}}\sim 2\mu _{\mathrm{B}}H_{||}^2{\mathrm{/}}H_{{\mathrm{SO}}}\)1,5. The first scenario can be ruled out, since it yields τSO < 50 fs, shorter than the scattering time5. The ISOC case is more likely, and the depairing energy of 0.5 μeV at 1 T (for the 3L device) yields HSO ≈ 200 T. Using Hp = 4.9 T (extracted by setting Δ1 = 0.4 meV) we can estimate \(H_{{\mathrm{c2}}} = \sqrt {H_{{\mathrm{SO}}}H_{\mathrm{p}}}\) ≈ 30 T, consistent with transport experiments1. We note that since the orbital term is not entirely suppressed, and we cannot estimate its contribution to the depairing, the estimate for HSO is a lower bound. Further details concerning the possible interpretation of the depairing term are given in Supplementary Note 3 and Supplementary Table 2.

The stability of the larger gap can even be demonstrated above the Pauli limit, Hp = 4.9 T for the 3-layer device. In Fig. 3c we present the density of states of this sample above the Pauli limit by applying an in-plane field of 6.4 T. At this field, our measurement system did not allow us to compensate for angle misalignment leading to small component of perpendicular field (≈0.2 T) and possible vortex penetration. Nevertheless, the size of the gap remains unchanged. This lends further support to ISOC as the mechanism protecting NbSe2 superconductivity at high parallel fields.

Fig. 3
figure 3

Response of the tunneling conductance to parallel magnetic fields. a dI/dV curves at increasing magnetic field parallel to the NbSe2 layers (H||) of the bulk sample, at 0 < H|| < 0.5 T. b Same for the 4-layer device at 0 < H|| < 3.5 T, and c same for the 3-layer device. Dashed line in c: dI/dV curve taken with the 3-layer device at uncompensated parallel field of 6.4 T. df dI/dV calculated from the KZ model for the bulk, 4-layer and 3-layer, respectively. Model parameters are given in Supplementary Note 3

Anomalous secondary gap

The sub-gap spectrum of the 3-layer device appears to exhibit a secondary, well-formed small gap of Δ2 = 50 μV, which is suppressed at H|| = 1.2 T. As we show in Fig. 3c, f, the KZ model reproduces this data remarkably well. Here, too, the depairing term is quadratic in H||, with \({{\Gamma }}_2^{{\mathrm{AG}}}\) ≈ 13 μeV at 1 T. This value is too big to be interpreted in terms of orbital depairing. The observed depairing could alternatively be associated with spin-orbit-driven spin-flip scattering, with τSO ≈ 1.5 ps. This depairing shows that unlike the band with larger gap, this band is not protected by ISOC. This difference can be explained by associating the smaller order parameter with the Se-derived band. The outer gap, appearing immune to depairing, would then be associated with the Nb-derived K-band. We note that this interpretation leaves open the question of the role of the Nb-derived Γ-band. Addressing this question will require further spectral studies—in particular, of monolayer NbSe2 where the Se-derived band does not cross the Fermi energy.


Our results show that TMD semiconductors transferred on top of NbSe2 form stable tunnel barriers with a hard gap. We show that the SSM model, modified to include diffusive depairing, successfully reproduces the tunneling spectra in both the bulk and the ultrathin limits, in the presence of in-plane magnetic fields. This allows us to probe the effect of the spin and orbital degrees of freedom on the spectra, thereby differentiating between the responses of the different bands to the field. The large gaps, in the 3- and 4-layer devices, are remarkably stable to depairing by the in-plane field, exhibiting very small depairing energies (<1 μeV), which place a tight cap on the spin-depairing observed on this band, lending support to ISOC as the mechanism behind this stability. We suggest that our technique can be generalized to work with many other material systems, such as organic (super)conductors and other fragile systems which have hitherto not been investigated using tunneling spectroscopy.


Device fabrication and measurement

The vdW tunnel junctions were fabricated using the dry transfer technique41, carried out in a glove-box (nitrogen atmosphere). NbSe2 flakes were cleaved using the scotch tape method, exfoliated on commercially available Gelfilm from Gelpack, and subsequently transferred to a SiO2 substrate. MoS2 and WSe2 flakes were similarly exfoliated and thin flakes suitable for the formation of tunnel barriers were selected based on optical transparency. The barrier flake was then transferred and positioned on top of the NbSe2 flake at room temperature. Ti/Au contacts and tunnel electrodes were fabricated using standard e-beam techniques. Prior to the evaporation of the ohmic contacts the sample was ion milled for 15 s. No such treatment was done with the evaporation of the tunnel electrodes. All transport measurements were done in a 3He–4He dilution refrigerator with a base temperature of 70 mK. The AC excitation voltage was modulated at 17 Hz; its amplitude was 15 μV at all temperatures for the bulk device and 10 μV for the few-layer devices. Measurement circuit details are provided in Supplementary Fig. 5.

Data availability

The data that support the findings of this study are available from the corresponding author upon request.


  1. 1.

    Xi, X. et al. Ising pairing in superconducting NbSe2 atomic layers. Nat. Phys. 12, 139–143 (2015).

    Article  Google Scholar 

  2. 2.

    Tsen, A. W. et al. Nature of the quantum metal in a two-dimensional crystalline superconductor. Nat. Phys. 12, 208–212 (2015).

    Article  Google Scholar 

  3. 3.

    Ugeda, M. M. et al. Characterization of collective ground states in single-layer NbSe2. Nat. Phys. 12, 92–97 (2015).

    Article  Google Scholar 

  4. 4.

    Staley, N. E. et al. Electric field effect on superconductivity in atomically thin flakes of NbSe2. Phys. Rev. B 80, 1–6 (2009).

    Article  Google Scholar 

  5. 5.

    Lu, J. M. et al. Evidence for two-dimensional Ising superconductivity in gated MoS2. Science 350, 1353–1357 (2015).

    ADS  MathSciNet  CAS  Article  PubMed  MATH  Google Scholar 

  6. 6.

    Saito, Y. et al. Superconductivity protected by spin–valley locking in ion-gated MoS2. Nat. Phys. 12, 144–149 (2015).

    Article  Google Scholar 

  7. 7.

    Lu, J. et al. A full superconducting dome of strong Ising protection in gated monolayer WS2. (2017).

  8. 8.

    Clogston, A. M. Upper limit for the critical field in hard superconductors. Phys. Rev. Lett. 9, 266–267 (1962).

    ADS  Article  Google Scholar 

  9. 9.

    Chandrasekhar, B. S. A note on the maximum critical field of high-field superconductors. Appl. Phys. Lett. 1, 7–8 (1962).

    ADS  CAS  Article  Google Scholar 

  10. 10.

    Jones, A. M. et al. Spin-layer locking effects in optical orientation of exciton spin in bilayer WSe2. Nat. Phys. 10, 130–134 (2014).

    CAS  Article  Google Scholar 

  11. 11.

    Noat, Y. et al. Quasiparticle spectra of 2H-NbSe2: two-band superconductivity and the role of tunneling selectivity. Phys. Rev. B 92, 134510–134518 (2015).

    ADS  Article  Google Scholar 

  12. 12.

    Boaknin, E. et al. Heat conduction in the vortex state of NbSe2: evidence for multiband superconductivity. Phys. Rev. Lett. 90, 117003 (2003).

    ADS  Article  PubMed  Google Scholar 

  13. 13.

    Giaever, I. Energy gap in superconductors measured by electron tunneling. Phys. Rev. Lett. 5, 147–148 (1960).

    ADS  Article  Google Scholar 

  14. 14.

    Geim, A. K. & Grigorieva, I. V. Van der Waals heterostructures. Nature 499, 419–425 (2013).

    CAS  Article  PubMed  Google Scholar 

  15. 15.

    Dean, C. R. et al. Boron nitride substrates for high-quality graphene electronics. Nat. Nanotechnol. 5, 722–726 (2010).

    ADS  CAS  Article  PubMed  Google Scholar 

  16. 16.

    Amet, F. et al. Tunneling spectroscopy of graphene-boron-nitride heterostructures. Phys. Rev. B 85, 073405 (2012).

    ADS  Article  Google Scholar 

  17. 17.

    Britnell, L. et al. Electron tunneling through ultrathin boron nitride crystalline barriers. Nano. Lett. 12, 1707–1710 (2012).

    ADS  CAS  Article  PubMed  Google Scholar 

  18. 18.

    Chandni, U., Watanabe, K., Taniguchi, T. & Eisenstein, J. P. Signatures of phonon and defect-assisted tunneling in planar metal-hexagonal boron nitride-graphene junctions. Nano. Lett. 16, 7982–7987 (2016).

    ADS  CAS  Article  PubMed  Google Scholar 

  19. 19.

    Island, J. O., Steele, G. A., van der Zant, H. S. & Castellanos-Gomez, A. Thickness dependent interlayer transport in vertical MoS2 Josephson junctions. 2D Mater. 3, 031002 (2016).

    Article  Google Scholar 

  20. 20.

    Guillamón, I., Suderow, H., Guinea, F. & Vieira, S. Intrinsic atomic-scale modulations of the superconducting gap of 2H-NbSe2. Phys. Rev. B 77, 134505 (2008).

    ADS  Article  Google Scholar 

  21. 21.

    Johannes, M. D., Mazin, I. I. & Howells, C. A. Fermi-surface nesting and the origin of the charge-density wave in NbSe2. Phys. Rev. B 73, 205102 (2006).

    ADS  Article  Google Scholar 

  22. 22.

    Yokoya, T. et al. Fermi surface sheet-dependent superconductivity in 2H-NbSe2. Science 294, 2518–2520 (2001).

    ADS  CAS  Article  PubMed  Google Scholar 

  23. 23.

    Kiss, T. et al. Charge-order-maximized momentum-dependent superconductivity. Nat. Phys. 3, 720–725 (2007).

    CAS  Article  Google Scholar 

  24. 24.

    Suhl, H., Matthias, B. T. & Walker, L. R. Bardeen-Cooper-Schrieffer theory of superconductivity in the case of overlapping bands. Phys. Rev. Lett. 3, 552–554 (1959).

    ADS  CAS  Article  MATH  Google Scholar 

  25. 25.

    Schopohl, N. & Scharnberg, K. Tunneling density of states for the two-band model of superconductivity. Solid State Commun. 22, 371–374 (1977).

    ADS  CAS  Article  Google Scholar 

  26. 26.

    McMillan, W. L. Tunneling model of the superconducting proximity effect. Phys. Rev. 175, 537–542 (1968).

    ADS  Article  Google Scholar 

  27. 27.

    Abrikosov, A. A. & Gor’kov, L. P. Contribution to the theory of superconducting alloys with paramagnetic impurities. Sov. Phys. JETP 12, 1243–1253 (1961).

    Google Scholar 

  28. 28.

    Maki, K. The behavior of superconducting thin films in the presence of magnetic fields and currents. Progress. Theor. Phys. 31, 731–741 (1964).

    ADS  Article  Google Scholar 

  29. 29.

    Levine, J. L. Density of states of a short-mean-free-path superconductor in a magnetic field by electron tunneling. Phys. Rev. 155, 373–378 (1967).

    ADS  CAS  Article  Google Scholar 

  30. 30.

    Millstein, J. & Tinkham, M. Tunneling into superconducting films in a magnetic field. Phys. Rev. 158, 325–332 (1967).

    ADS  CAS  Article  Google Scholar 

  31. 31.

    Kaiser, A. B. & Zuckermann, M. J. McMillan model of the superconducting proximity effect for dilute magnetic alloys. Phys. Rev. B 1, 229–235 (1970).

    ADS  Article  Google Scholar 

  32. 32.

    Fulde, P. Tunneling phenomena in solids. Gapless Superconducting Tunneling—Theory, 427–442 (Springer, 1969).

  33. 33.

    Fridman, I., Kloc, C., Petrović, C. & Wei, J. Y. T. Lateral imaging of the superconducting vortex lattice using Doppler-modulated scanning tunneling microscopy. Appl. Phys. Lett. 99, 192505 (2011).

    ADS  Article  Google Scholar 

  34. 34.

    Kohen, A. et al. Probing the superfluid velocity with a superconducting tip: the doppler shift effect. Phys. Rev. Lett. 97, 027001 (2006).

    ADS  CAS  Article  PubMed  Google Scholar 

  35. 35.

    Tinkham, M. Introduction to superconductivity (Courier Corporation, 1996).

  36. 36.

    Garoche, P., Veyssié, J., P, M. & P, M. Experimental inverstigation of superconductivity in 2H-NbSe2 single crystal. Solid State Commun. 19, 455–460 (1976).

    ADS  CAS  Article  Google Scholar 

  37. 37.

    Frindt, R. F. Superconductivity in ultrathin NbSe2 layers. Phys. Rev. Lett. 5, 299–301 (1972).

    ADS  Article  Google Scholar 

  38. 38.

    Finkel’shtein, A. M. Superconducting transition temperature in amorphous films. JETP 45, 37–40 (1987).

    Google Scholar 

  39. 39.

    Finkel’shtein, A. M. Suppression of superconductivity in homogeneously disordered systems. Phys. B 197, 636–648 (1994).

    ADS  Article  Google Scholar 

  40. 40.

    Goldman, A. M. & Marković, N. Superconductorinsulator transitions in the two dimensional limit. Phys. Today 51, 39–44 (1998).

    CAS  Article  Google Scholar 

  41. 41.

    Castellanos-Gomez, A. et al. Deterministic transfer of two-dimensional materials by all-dry viscoelastic stamping. 2D Mater. 1, 011002 (2014).

    Article  Google Scholar 

Download references


We thank P. Février and J. Gabelli for helpful discussions on tunnel barriers, and T. Cren for the same on NbSe2. This work was funded by a Maimondes-Israel grant from the Israeli-French High Council for Scientific & Technological Research and by an ANR JCJC grant (SPINOES) from the French Agence Nationale de Recherche. H.S. acknowledges support by ERC-2014-STG Grant No. 637298 (TUNNEL) and Marie Curie CIG Grant No. PCIG12-GA-2012-333620. T.D. is grateful to the Azrieli Foundation for an Azrieli Fellowship. F.M. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skodowska-Curie Grant No. 659247. L.A. and M.K. are supported by the Israeli Science Foundation through Grant No. 1287/15.

Author information




T.D. fabricated the devices. C.Q.H.L., T.D., and M.A. performed the measurements. T.D., F.M, L.A., M.K., C.Q.H.L., M.A., and H.S. contributed to data analysis and the writing of the manuscript.

Corresponding author

Correspondence to H. Steinberg.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Dvir, T., Massee, F., Attias, L. et al. Spectroscopy of bulk and few-layer superconducting NbSe2 with van der Waals tunnel junctions. Nat Commun 9, 598 (2018).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing