Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Isolation of diborenes and their 90°-twisted diradical congeners


Molecules containing multiple bonds between atoms—most often in the form of olefins—are ubiquitous in nature, commerce, and science, and as such have a huge impact on everyday life. Given their prominence, over the last few decades, frequent attempts have been made to perturb the structure and reactivity of multiply-bound species through bending and twisting. However, only modest success has been achieved in the quest to completely twist double bonds in order to homolytically cleave the associated π bond. Here, we present the isolation of double-bond-containing species based on boron, as well as their fully twisted diradical congeners, by the incorporation of attached groups with different electronic properties. The compounds comprise a structurally authenticated set of diamagnetic multiply-bound and diradical singly-bound congeners of the same class of compound.


Olefins are ubiquitous in biological systems, crude oil, medicine, and industry, and have been detected in interstellar media, comets, and carbonaceous meteorites1,2,3. Having one degree of electronic unsaturation more than relatively inert alkanes, olefins are the simplest and most earth-abundant hydrocarbons that show reactivity under ambient conditions, leading to their widespread industrial use as well as their implication in questions related to the origins of life4. Olefins are molecules that contain a double bond between two carbon atoms consisting of one bond of σ symmetry and one of π symmetry (Fig. 1a, left). This π bond is the root of the countless synthetic uses of olefins, as it contains a concentration of electron density that can interact with a wide range of reagents.

Fig. 1

Twisting double bonds. Orbital changes accompanying the conceptual twisting of element–element double bonds in alkenes (a) and diborenes (b) to form diradical species

The π orbital of olefins requires the parallel alignment of two carbon p orbitals, and thus also the coplanarity of the two carbon atoms, as depicted in Fig. 1a, left. Since at least the 1960s, a major goal of organic chemistry has been to push the limits of the olefin model through the construction of strained, bent, and twisted alkenes5,6. Twisting a (symmetrical) olefin by 90° would completely break its π bond, presumably leading to a triplet diradical (Fig. 1a, right) and making it susceptible to otherwise unfavored cycloaddition reactions7,8 and further decomposition pathways9. This destabilizing response of alkenes to twisting is also the basis of the widely applicable Bredt’s rule10,11,12, which states that double bonds at the bridgehead positions of small bicyclic systems are disfavored (and reactive) due to their necessarily twisted geometry.

It is thus unsurprising that efforts to isolate “twisted olefin” compounds have resulted in only partial success: isolation of diamagnetic, incompletely twisted structures (up to 66° in the structurally authenticated compound perchloro-9,9′-bifluorenylidene)13,14,15,16,17,18. Beyond carbon–carbon double bonds, sterically hindered heavier olefin analogs such as disilenes (of the form R2Si = SiR2) also withstand significant twisting of the double bond (up to 55°)19,20,21,22,23. In a key 2015 study, Sekiguchi and coworkers reported that one of these disilenes (Si2(SiMetBu2)4) was able to thermally populate a triplet state by twisting of the (already highly twisted) Si=Si bond above 77 °C. This diradical compound was characterized by electron paramagnetic resonance (EPR) spectroscopy and calculated to have an average SiSiSiSi dihedral angle of 75.2°; however, its structure could not be authenticated experimentally22. This work remains the forefront of chemists’ efforts to isolate the diradical products of twisting element–element double bonds.

In this work, we present the isolation of planar, doubly-base-stabilized diborenes (Fig. 1b, left)24,25,26,27, as well as their 90°-twisted diradical congeners (Fig. 1b, right), through the use of different Lewis basic units. The former contain conventional B=B double bonds, while the latter show no B–B multiple bonding and host unpaired electrons in each of the two independent, delocalized π systems. The isolation of the stable ground-state diradical species is facilitated by the outstanding ability of cyclic (alkyl)(amino)carbene (CAAC)28,29 units to stabilize30 adjacent radicals31,32,33,34. This work marks, to the best of our knowledge, the first isolation and structural confirmation of the diradical products of complete homolysis and 90° twisting of double bonds.


Synthesis of diborenes and their diradical congeners

Simple room-temperature (RT) addition of either equal amounts or slight excesses of dibutyldisulfide, diphenyldisulfide, or diphenyldiselenide to solutions of the triple-bond-containing diboryne species B2(IDip)2 (IDip = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) led to new 11B NMR signals to higher field of that of the triply-bound precursor (δB 39)24, signifying the formation of three new products, 1ac (Fig. 2a, top). After short purification steps, 1ac were obtained as pure green (1a) or purple (1b,c) solids with 11B NMR signals (1a: δB 30; 1b: δB 25; 1c: δB 22) in a similar range to those of known doubly NHC-stabilized diborenes (δB 18–28)24,25,26,27, but significantly more downfield than those of two previously observed diboratellurirenium cations (cyclo-[Te(R)B(NHC)B(NHC)]+) prepared by the analogous reactions of B2(IDip)2 with diphenylditelluride (δB 0)35. Single-crystal X-ray diffraction confirmed the trans-diborene nature of 1a–c, all three molecules displaying effectively planar LRB=BRL double bond units (Fig. 2b, top), and short B=B double bonds (1a: 1.585(4) Å; 1b: avg. 1.568(6) Å; 1c: avg. 1.565(5) Å).

Fig. 2

Synthesis and structures of diborenes 1 and diradicals 2. a Synthesis of diborenes 1 and diradicals 2. b Solid-state structures of diborenes 1 and diradicals 2. Blue insets: views along the roughly planar B=B units of 1ac. Orange insets: views along the B–B axis showing the near-perpendicular boron planes

We also attempted the analogous addition of dibutyldisulfide, diphenyldisulfide, or diphenyldiselenide to solutions of a more cumulenic CAAC analog of B2(IDip)2 (B2(CAAC)2; CAAC = 1-(2,6-diisopropylphenyl)-3,3,5,5-tetramethylpyrrolidin-2-ylidene)36. However, to our surprise, all three reaction mixtures became very dark, and all attempts to obtain NMR spectra from the mixtures gave either silent spectra or exceptionally broad signals well outside the normal diamagnetic chemical shift ranges. Solvent extraction and recrystallization provided the black solids 2ac (Fig. 2a, bottom), with elemental analyses corresponding to 1:1 combination of the reagents, in moderate yields. Single-crystal X-ray diffraction allowed us to elucidate the structures of 2ac (Fig. 2b, bottom). In marked contrast to the structures of diborenes 1ac, the structures of 2ac showed orthogonal C-B-S/Se planes, with S/Se-B-B-S/Se torsion angles near 90° (2a: 85.5(1)°; 2b: 100.9(1)°; 2c: 99.7(2)°), and long, single B–B bonds (2a: 1.728(2) Å; 2b: 1.713(2) Å; 2c: 1.700(4) Å). On either side of the midpoint of the molecules, the N-C-B-S/Se units are near-planar, with relatively small N-C-B-S/Se torsion angles (2a: 1.7(2)°, 14.6(2)°; 2b: 17.4(2)°, 1.5(2)°; 2c: 18.7(3)°, 0.1(4)°) suggesting significant π-electron delocalization over this portion of the molecule. The B-S/Se distances of 2ac (d(B–S): 1.84–1.86 Å; d(B–Se): 1.99–2.00 Å) were found to be slightly shorter than those of 1ac (d(B–S): 1.88–1.92 Å; d(B–Se): 2.01–2.06 Å), and the B–C distances of 2ac (1.53–1.55 Å) are likewise shorter than those of 1ac (1.57–1.62 Å).

EPR and magnetic measurements

The significantly greater delocalization in the C-B-S/Se portion of 2ac, the apparent absence of B–B multiple bonding, and the inability to procure NMR data of the compounds suggested that they may be captodatively stabilized30 triplet diradicals, each with two push–pull systems involving the π-donating S/Se atom and the π-accepting CAAC carbene carbon atom (i.e., LRB(•)–B(•)RL; Fig. 2a, bottom). Furthermore, the coplanar B and C atoms and short B–C bonds of 2ac are reminiscent of our related neutral monoradical species [DurB(Cl)(CAAC)] reported in 201431. In order to confirm the diradical nature of 2ac, we performed EPR spectroscopy on 2ac in frozen 2-methyltetrahydrofuran glass. While we observed an intense half-field transition for 2a and 2b (Fig. 3a, Supplementary Figs. 1216), only a weak signal was observed for compound 2c (Supplementary Fig. 17). The obtained spectra of 2a and 2b are dominated by rhombic zero-field splitting (ZFS) due to dipole interaction, indicating that the spin system in question is a triplet state. Analysis of the spectra yields estimates of the ZFS parameters (2a: D = 0.036 cm−1, E = 0.0054 cm−1; 2b: D = 0.042 cm−1, E = 0.0077 cm−1), the axial parts of which correspond to interspin distances of 4.5 and 4.4 Å (assuming point dipole approximation), respectively. These distances are significantly longer than the ca. 1.70–1.73 Å boron–boron distances found by X-ray crystallography, and match better the distance between the two CAAC carbene carbon atoms (2a: ca. 4.0 Å; 2b: ca. 3.9 Å). Thus, the two unpaired electrons must be significantly delocalized into the substituents, most likely toward the carbene carbon atoms, which is in line with that expected by the captodative effect of the π-donor nitrogen and π-acceptor boron atoms.

Fig. 3

Spectroscopic, magnetic, and computational studies of compounds 1a and 2a. a Temperature-dependent EPR spectra of 1 mM 2a in 2-Me-THF. Experimental parameters: temperature = 20−120 K; microwave frequency = 9.38 GHz; microwave power = 0.1 mW; modulation amplitude = 2 G; conversion time = 60 ms; modulation frequency = 100 kHz. b Temperature dependence of the magnetic moment of 2a. Black cycles: experimental data. Red line: best fit data for the ferromagnetically coupled case with J = +15 cm–1 and g = 2.01. For comparison, the theoretical data for the non-coupled (J = 0 cm–1, green line) and antiferromagnetically coupled (J = –15 cm–1, blue line) cases are also depicted. c HOMO plot of 1a at the M05-2X/def2-SVP level. d SOMO plots of 2a at the M05-2X/def2-SVP level. e Mulliken spin densities of relevant atoms of 2a at the M05-2X/def2-SVP level

To probe the exchange interaction between spin carriers in diradical 2a, temperature-dependent magnetic measurements were performed on a solid sample (Fig. 3b). The effective magnetic moment increases from 2.50 μB at RT to 2.81 μB at 10 K, clearly indicating the presence of ferromagnetic interaction inside the molecule. Quantitative analysis based on the Ĥ = –21Ŝ2 spin Hamiltonian allowed determination of the exchange coupling parameter to be J = +15 cm–1, i.e., the ground state of the molecule is a triplet and lies 2J = 30 cm–1 (0.086 kcal mol–1) lower than the singlet state. The exchange coupling determined from solid-state SQUID measurements is also reflected to some degree in the temperature-dependence of the signal intensities observed in the solution-state EPR spectra of 2a (Supplementary Fig. 14).

Quantum-chemical investigations

Density functional theory (DFT) calculations for diamagnetic diborenes 1ac and the diradicals 2ac (Supplementary Figs. 2239) agree with the experimental findings that the singlet states of 1ac are always more stable than the triplet states, whereas the triplet states of 2ac are always more stable than the singlet states. The calculated bond lengths (Supplementary Figs. 2239) and Wiberg bond indices (WBIs) support the proposed bonding arrangements depicted in Fig. 2a, with B=B double bond character in 1ac (1a: 1.55, 1b: 1.58, 1c: 1.60) and single B–B bond character in 2ac (2a: 0.97, 2b: 0.98, 2c: 0.99). Figure 3c, d (and Supplementary Figs. 4045) illustrate the stark contrasts between the highest-energy occupied orbitals of diborenes 1ac and diradicals 2ac. The former, as exemplified by 1a, possess highest occupied molecular orbitals (HOMOs; Fig. 3c) consisting of bonding B–B π interactions that extend slightly toward the pπ orbital of the carbene carbon atoms. The latter, as exemplified by 2a, have two near-degenerate singly-occupied molecular orbitals (SOMOs; Fig. 3d), each of which is delocalized over one N-C-B-S/Se moiety, with a bonding interaction between B and C, weak antibonding between C and N, and weaker antibonding between B and S/Se. These singly-occupied orbitals clearly illustrate the presence of two radical centers in each of 2a-c, and that each unpaired electron resides in one respective N-C-B-S/Se π system. The calculated Mulliken spin densities of 2a (Fig. 3e) show that the unpaired electrons reside predominantly in the CAAC carbon pπ orbitals (0.50 and 0.45 e), with lower but roughly equivalent spin density on the B (0.18 and 0.23 e) and N (0.21 and 0.22 e) atoms.

While DFT computations and experiment agree in terms of geometry and the energetic order of the singlet and triplet states, the DFT computations considerably overestimate the size of the singlet–triplet gap (S–T gap) of compound 2a. The overestimation may result from the need for multi-reference approaches37,38 to describe the singlet and triplet states on equal footing. Because 2a is too large for such costly approaches, we investigated the error of the DFT approaches for a smaller model system (2aʹ; Supplementary Figure 46), which reflects all of the essential binding effects of 2a but is sufficiently small for multi-reference calculations. The results (Supplementary Table 3) show that all functionals indeed overestimate the stability of the triplet state considerably. While the very accurate NEVPT239,40/def2-TZVP approach predicts an S–T gap of only –0.4 kcal mol–1 (triplet lower than singlet), the values obtained with DFT range from –4 to –28 kcal mol–1. The MN12-L/6–311G(d,p) approach used to estimate the S–T gap of the full system 2a overestimates the stability of the triplet state by about 6–7 kcal mol–1. Transferring this error to the predictions of the MN12L41/6–311G(d,p)42,43 approach for the full system 2a (–6.4 kcal mol–1), a near-zero S–T gap results, which is in line with the measured value.

Electrochemical investigations

The electrochemical behavior of 2ac also distinguishes these diradicals from diborenes 1ac (Supplementary Figs. 20 and 21). Diborenes 1a-c show facile oxidation events in their cyclic voltammograms (with no apparent reduction processes), as previously observed for related diborenes44. In contrast, diradicals 2ac show less-facile oxidation events, with additional reduction waves, in line with the presence of the more π-accepting CAAC ligands. It should also be noted that variable-temperature NMR experiments suggest that the diamagnetic diborenes 1 and the diradical species 2 do not convert to their alternative conformations upon heating to 80 °C.


The synthesis of diborenes 1ac and their twisted congeners 2ac marks the first isolation and structural authentication of diamagnetic, multiply-bound molecules and their diradical, single-bond congeners, products of formal homolysis of the central multiple bond. Crystallographic, EPR spectroscopic, magnetic and theoretical studies confirm that 2ac are diradical species. Spectroscopic and computational studies also confirm the substantial energy differences between the singlet and triplet states of the molecules, with the singlet states being favored in 1ac and the triplet states in 2ac.


Synthetic methods

All reactions were carried out under an atmosphere of dry argon using standard Schlenk line and glovebox techniques. NMR spectra (Supplementary Figures 111) were obtained from a Bruker Avance 500 NMR spectrometer (1H: 500.13 MHz, 11B: 160.46 MHz, 13C{1H}: 125.76 MHz) at RT. Chemical shifts (δ) are given in ppm and internally referenced to the carbon nuclei (13C{1H}) or residual protons (1H) of the solvent. 11B NMR spectra were referenced to the external standard [BF3·OEt2]. Microanalyses (C, H, N) were performed on an Elementar vario MICRO cube elemental analyzer. Melting points were determined with a Mettler Toledo 823e DSC in sealed ampules with a ramp rate of 10 °C min−1. UV/vis absorption spectra (Supplementary Figures 18 and 19) were recorded on a JASCO V-660 UV/vis spectrometer. Cyclic voltammetry experiments were performed using a Gamry Instruments Reference 600 potentiostat. Deuterated benzene was purchased from Sigma Aldrich and dried over molecular sieves. Other solvents were dried by storage over, and distillation from, potassium benzophenone (THF, diethyl ether), Na/K alloy (pentane, hexane), or sodium (toluene, benzene) under an argon atmosphere. Solvents were stored under argon over activated 4 Å molecular sieves. Diboryne precursors B2IDip224 and B2CAAC236 were prepared according to literature methods. Dimethyl disulfide, dibutyl disulfide, diphenyl disulfide, and diphenyl diselenide were purchased from commercial sources.

Synthesis of B 2 (IDip) 2 (SBu) 2 , (1a): Dibutyldisulfide (34.7 µL, 188 µmol) was added dropwise to a stirred solution of B2(IDip)2 (100 mg, 125 µmol) in pentane (10 mL). The mixture was stirred for 18 h at RT and all volatiles were removed in vacuo. The dark green residue was dried in vacuo at 80 °C for 2 h to remove the excess dibutyldisulfide, extracted with 5 mL pentane, and crystallized from a slowly evaporating hexane/ether solution. The crystalline material was washed with pentane (2 × 1 mL) yielding 73.4 mg (75.1 µmol, 60%) of pure 1a as a green solid. 1H NMR (500.1 MHz, toluene-d8): δ = 7.19–7.14 (m, 4 H, CHAryl), 7.04 (s, 4 H, CHAryl), 7.02 (s, 4 H, CHAryl), 6.36 (s, 4 H, CHNHC), 3.02 (br, 8 H, CHiPr), 1.74 (t, 3J H,H  = 7.78 Hz, 4 H, SBu-CH2), 1.23 (d, 3J H,H  = 6.1 Hz, 24 H, iPr-CH3), 1.17–1.05 (m, 8 H, SBu-CH3), 0.98 (d, 3J H,H  = 6.8 Hz, 24 H, iPr-CH3), 0.88 (t, 3J H,H  = 7.78 Hz, 6 H, SBu-CH3). 13C NMR (125.8 MHz, toluene-d8) δ = 176.8 (CNHC), 147.0 (C q ), 139.2 (C q ), 129.1 (CHAryl), 124.4 (CHAryl), 123.8 (CHNHC), 43.1 (SBu-CH2), 34.9 (SBu-CH2), 29.1 (CHiPr), 26.2 (iPr-CH3), 24.3 (iPr-CH3) 24.0 (SBu-CH2), 14.7 (SBu-CH3). 11B NMR (160.5 MHz, toluene-d8): δ = 30 (s) ppm. Elemental analysis calculated for C62H90B2N4S2[+hexane]: C 76.81%, H 9.86%, N 5.27%, S 6.03%; found: C 76.86%, H 9.63%, N 5.62%, S 5.82%.

Synthesis of B 2 (IDip) 2 (SPh) 2 , (1b): B2IDip2 (50.0 mg, 62.6 µmol) and diphenyldisulfide (13.7 mg, 62.7 µmol) were dissolved in benzene (10 mL) and stirred for 14 h. The solvent was evaporated and the residue was extracted with pentane (2 × 5 mL). The pentane phase was removed under vacuum giving pure 1b (16.8 mg, 16.5 µmol, 26%) as a purple solid. Suitable crystals for X-ray diffraction were obtained by slow evaporation of a pentane solution. Decomp.: 221 °C. 1H NMR (500.1 MHz, C6D6): δ = 7.04 (t, 3J H,H  = 7.6 Hz, 4 H, CHAryl), 6.91 (d, 3J H,H  = 7.6 Hz, 8 H, CHAryl), 6.85 (br, 4 H, CHAryl), 6.79 (br, 6 H, CHAryl), 6.29 (s, 4 H, CHNHC), 3.20 (br, 8 H, CHiPr), 1.05 (m, 24 H, iPr-CH3), 0.97 (d, 3J H,H  = 6.8 Hz, 24 H, iPr-CH3) ppm. 13C NMR (125.8 MHz, C6D6) δ = 174.7 (C q ), 148.8 (C q ), 146.3 (C q ), 137.6 (C q ), 129.3 (CHAryl), 128.9 (CHAryl), 127.7 (CHAryl), 124.2 (CHAryl), 124.0 (CHNHC), 120.1 (CHAryl), 28.9 (CHiPr), 26.6 (iPr-CH3), 22.7 (iPr-CH3) ppm. 11B NMR (160.5 MHz, C6D6): δ = 25 (s) ppm. Elemental analysis calculated for C66H82B2N4S2: C 77.94%, H 8.13%, N 5.51%, S 6.30%; found: C 78.12%, H 8.26%, N 5.58%, S 6.25%.

Synthesis of B 2 (IDip) 2 (SePh) 2 , (1c): A solution of B2IDip2 (50.0 mg, 62.6 µmol) and 1,2-diphenyldiselenide (19.5 mg, 62.6 µmol) in benzene (10 mL) was stirred for 14 h. After the solvent was removed, the residue was extracted with pentane (2 × 5 mL). The solvent was evaporated under vacuum giving pure 1c (15.8 mg, 14.2 µmol, 23%) as a purple solid. Suitable crystals for X-ray diffraction were obtained by slow evaporation of a pentane solution. Decomp.: 128 °C. 1H NMR (500.1 MHz, C6D6): δ = 7.05 (t, 3J H,H  = 7.6 Hz, 4 H, CHAryl), 6.96 (d, 3J H,H  = 7.4 Hz, 4 H, CHAryl), 6.93 (d, 3J H,H  = 7.6 Hz, 8 H, CHAryl), 6.88 (t, 3J H,H  = 7.4 Hz, 2 H, CHAryl), 6.76 (t, 3J H,H  = 7.4 Hz, 4 H, CHAryl), 6.33 (s, 4 H, CHNHC), 3.29 (br, 8 H, CHiPr), 1.02 (m, 24 H, iPr-CH3), 0.98 (d, 3J H,H  = 6.8 Hz, 24 H, iPr-CH3) ppm. 13C NMR (125.8 MHz, C6D6) δ = 174.7 (C q ) 146.5 (C q ), 143.2 (C q ), 137.53 (C q ), 137.52 (C q ), 131.3 (CHAryl), 129.5 (CHAryl), 127.7 (CHAryl), 124.3 (CHAryl), 124.1 (CHNHC), 121.3 (CHAryl), 29.0 (CHiPr), 26.7 (iPr-CH3), 22.8 (iPr-CH3) ppm. 11B NMR (160.5 MHz, C6D6): δ = 22 (s) ppm. 77Se NMR (95.4 MHz, C6D6): δ = 175.6 ppm. Elemental analysis calculated for C66H82B2N4Se2: C 71.36%, H 7.44%, N 5.04%; found: C 70.68%, H 7.66%, N 4.66%.

Synthesis of B 2 (CAAC) 2 (SBu) 2 , (2a): Dibutyl disulfide (141 µL, 743 µmol) was added dropwise to a stirred solution of B2(CAAC)2 (400 mg, 675 µmol) in pentane (20 mL) at –40 °C. The mixture was stirred for 24 h at RT and all volatiles were removed in vacuo. The dark yellow solid was dried in vacuo, dissolved in hexane (10 mL), and black crystals were obtained by slow evaporation of the solvent. The crystalline material was washed with pentane (2 × 1 mL) yielding 291 mg (379 µmol, 56%) of pure 2a as a black solid. Elemental analysis calculated for C48H80B2N2S2: C 74.78%, H 10.46%, N 3.63%, S 8.32%; found: C 75.15%, H 10.37%, N 3.70%, S 8.01%.

Synthesis of B 2 (CAAC) 2 (SPh) 2 , (2b): Pentane (20 mL at –40 °C) was added to a mixture of B2(CAAC)2 (100 mg, 168 µmol) and diphenyl disulfide (36.8 mg, 168 µmol). The mixture was stirred for 3 h at RT, filtered and the residual solid was washed with pentane (3 × 5 mL). The brown solid was dried in vacuo, dissolved in benzene (10 mL), and black crystals were obtained by slow evaporation of the solvent. The crystalline material was washed with pentane (2 × 1 mL) yielding 53.4 mg (65.9 µmol, 39%) of pure 2b as a black solid. Decomp.: 138 °C. Elemental analysis calculated for C52H72B2N2S2: C 77.02%, H 8.95%, N 3.45%, S 7.91%; found: C 77.57%, H 8.97%, N 3.36%, S 7.58%.

Synthesis of B 2 (CAAC) 2 (SePh) 2 , (2c): Pentane (20 mL at –40 °C) was added to a mixture of B2(CAAC)2 (100 mg, 168 µmol) and diphenyl diselenide (52.7 mg, 168 µmol). The mixture was stirred for 3 h at RT, filtered and the residual solid was washed with pentane (2 × 5 mL). The brown solid was dried in vacuo, dissolved in benzene (10 mL), and black crystals were obtained by slow evaporation of the solvent. The crystalline material was washed with pentane (2 × 1 mL) yielding 36.2 mg (40.0 µmol, 24%) of pure 2c as a black solid. Decomp.: 191 °C. Elemental analysis calculated for C52H72B2N2Se2: C 69.04%, H 8.02%, N 3.10%; found: C 69.24%, H 7.95%, N 2.74%.

EPR spectroscopic methods

EPR measurements at the X-band (9.4 GHz) were carried out using a Bruker ELEXSYS E580 CW EPR spectrometer equipped with an Oxford Instruments helium cryostat (ESR900) and a MercuryiTC temperature controller. The spectral simulations were performed using MATLAB (R2015b) and the EasySpin 5.1.9 toolbox45. The EPR spectra of 2a and 2b show an intense half-field signal but only partially resolved zero-field splittings with no visible hyperfine structure. Attempts to improve the resolution by lowering the concentration or changing the solvent were not successful. For 2c, no clear sign of a triplet ground state could be obtained.

Electrochemical methods

Cyclic voltammetry experiments were performed using a Gamry Instruments Reference 600 potentiostat. A standard three-electrode cell configuration was employed using a platinum disk working electrode, a platinum wire counter electrode, and a silver wire, separated by a Vycor tip, serving as the reference electrode. Formal redox potentials are referenced to the ferrocene/ferrocenium ([Cp2Fe]+/0) redox couple by using ferrocene as an internal standard. Tetrabutylammonium hexafluorophosphate ([Bu4N][PF6]) was employed as the supporting electrolyte. Compensation for resistive losses (iR drop) was employed for all measurements.

Crystallographic methods

The crystal data of B2IDip2(SBu)2 (1a), B2IDip2(SPh)2 (1b), B2IDip2(SePh)2 (1c), and B2CAAC2(SBu)2 (2a) were collected on a Bruker X8-APEX II diffractometer with a CCD area detector and multi-layer mirror-monochromated Mo radiation. The structure was solved using the intrinsic phasing method (ShelXT)46, refined with the ShelXL program47, and expanded using Fourier techniques. All non-hydrogen atoms were refined anisotropically. Hydrogen atoms were included in structure factor calculations. All hydrogen atoms were assigned to idealized geometric positions.

Crystal data for B 2 IDip 2 (SBu) 2 (1a): The displacement parameters of atoms C63–C74 were restrained to the same value with similarity restraint SIMU. C68H104B2N4S2, Mr = 1063.29, green block, 0.294 × 0.257 × 0.125 mm3, monoclinic space group P21/c, a = 14.423(5) Å, b = 12.522(5) Å, c = 36.640(17) Å, β = 96.25(3)°, V = 6578(5) Å3, Z = 4, ρcalcd = 1.074 g cm–3, μ = 0.122 mm–1, F(000) = 2328, T = 103(2) K, R1 = 0.0980, wR2 = 0.1550, 13420 independent reflections [2θ ≤ 52.744°], and 768 parameters. CCDC-1567701.

Crystal data for B 2 IDip 2 (SPh) 2 (1b): C66H82B2N4S2, Mr = 1017.09, red block, 0.25 × 0.14 × 0.05 mm3, monoclinic space group P21/c, a = 22.2980(16) Å, b = 24.4556(17) Å, c = 42.972(3) Å, β = 91.133(2)°, V = 23428(3) Å3, Z = 16, ρcalcd = 1.153 g cm−3, μ = 0.134 mm–1, F(000) = 8768, T = 100(2) K, R1 = 0.1465, wR2 = 0.1925, 48137 independent reflections [2θ ≤ 52.746°], and 2730 parameters. CCDC-1567705.

Crystal data for B 2 IDip 2 (SePh) 2 (1c): C66H82B2N4Se2, Mr = 1110.89, red block, 0.35 × 0.15 × 0.08 mm3, monoclinic space group P21/c, a = 22.4904(11) Å, b = 24.4964(13) Å, c = 43.042(2) Å, β = 91.335(2)°, V = 23707(2) Å3, Z = 16, ρcalcd = 1.245 g cm–3, μ = 1.291 mm–1, F(000) = 9344, T = 100(2) K, R1 = 0.0804, wR2 = 0.0917, 48482 independent reflections [2θ ≤ 52.744°], and 2729 parameters. CCDC-1567706.

Crystal data for B 2 CAAC 2 (SBu) 2 (2a): C51H87B2N2S2, Mr = 813.96, orange block, 0.335 × 0.257 × 0.112 mm3, triclinic space group P \(\overline 1\), a = 10.383(5) Å, b = 14.048(9) Å, c = 17.857(8) Å, α = 75.299(15)°, β = 84.42(3)°, γ = 77.545(19)°, V = 2458(2) Å3, Z = 2, ρcalcd = 1.100 g cm–3, μ = 0.143 mm–1, F(000) = 898, T = 100(2) K, R1 = 0.0532, wR2 = 0.1087, 10053 independent reflections [2θ ≤ 52.744°], and 533 parameters. CCDC-1567703.

The crystal data of B2CAAC2(SPh)2 (2b) and B2CAAC2(SePh)2 (2c) were collected on a Bruker D8 Quest diffractometer with a CMOS area detector and multi-layer mirror-monochromated Mo radiation. The structure was solved using the intrinsic phasing method (ShelXT)46, refined with the ShelXLprogram47, and expanded using Fourier techniques. All non-hydrogen atoms were refined anisotropically. Hydrogen atoms were included in structure factor calculations. All hydrogen atoms were assigned to idealized geometric positions.

Crystal data for B 2 CAAC 2 (SPh) 2 (2b): C52H72B2N2S2, Mr = 810.85, orange block, 0.173 × 0.161 × 0.122 mm3, monoclinic space group P21/n, a = 9.9798(15) Å, b = 18.647(4) Å, c = 24.919(5) Å, β = 97.909(15)°, V = 4593.2(15) Å3, Z = 4, ρcalcd = 1.173 g cm–3, μ = 0.153 mm–1, F(000) = 1760, T = 100(2) K, R1 = 0.0422, wR2 = 0.0961, 9368 independent reflections [2θ ≤ 52.746°], and 539 parameters. CCDC-1567702.

Crystal data for B 2 CAAC 2 (SePh) 2 (2c): C52H72B2N2Se2, Mr = 904.65, orange block, 0.061 × 0.055 × 0.025 mm3, monoclinic space group P21/n, a = 10.060(7) Å, b = 18.707(7) Å, c = 24.857(14) Å, β = 98.86(3)°, V = 4622(5) Å3, Z = 4, ρcalcd = 1.300 g cm–3, μ = 1.637 mm–1, F(000) = 1904, T = 100(2) K, R1 = 0.0628, wR2 = 0.0784, 9321 independent reflections [2θ ≤ 52.746°], and 539 parameters. CCDC-1567704.

Computational methods

Geometry optimizations of all complexes were carried out at the M05-2X48, B3LYP49,50,51, and BP8650,52 levels in conjunction with the def2-SVP53 basis set. The structures were characterized as minima by frequency calculation. The NBO54 analyses were carried out at the M05-2X/def2-SVP level (Supplementary Table 2). The calculations were performed with the Gaussian 09, Revision D.01 program package55. Density functional theory (DFT) calculations were carried out on diamagnetic diborenes 1ac and the diradicals 2ac in their singlet and triplet states (Supplementary Figs. 2239). Calculations using the functionals M05-2X, B3LYP, and BP86 show that the singlet states of 1ac are always more stable than the triplet states (ΔES–T of 1a: 16.7, 17.8, 19.1, 1b: 24.4, 22.2, 21.8, 1c: 26.3, 23.6, 23.0 kcal mol–1 at the M05-2X, B3LYP, and BP86 levels, respectively) whereas the triplet states of 2a-c are always more stable than the singlet states (ΔES–T of 2a: –33.2, –28.6, –23.6; 2b: –23.6, –20.3, –15.2; 2c: –28.5, –20.6, –20.1 kcal mol–1 at the M05-2X, B3LYP, and BP86 levels, respectively) (Supplementary Table 1). The bond lengths calculated at the M05-2X/def2-SVP level (Supplementary Figs. 2227) are in better agreement with the experimental bond lengths than those calculated at the B3LYP/def2-SVP (Supplementary Figs. 2833) and BP86/def2-SVP levels (Supplementary Figs. 3439); our discussions thus focus on calculations performed at the former level.

High level computations for model compound 2aʹ: For 2a, measurements indicate that the triplet state is only slightly more stable than the corresponding singlet state. In contrast, DFT computations employing various functionals predict that the triplet state lies more than 20 kcal mol−1 below the corresponding singlet state. The large overestimation of the S–T gap may partially result from solid-state effects; however, the DFT functionals used may also underestimate static correlation effects, which stabilize the biradical singlet state of 2a with respect to the corresponding triplet ground states. More insights into the reasons for the differences between measured and computed values can only be obtained from high-level multi-reference computations; however, compound 2a is too large for such approaches.

To obtain an estimate of the inaccuracies of DFT approaches, we first used the MN12L41/6-311G(d,p)42,43 approach to optimize the geometry of the lowest-lying singlet and triplet states of 2a. Both optimizations were started from the X-ray structure of the triplet ground state. The computed singlet geometry does not represent the global minimum of the singlet potential energy surface, which possesses a nearly planar CCAAC-B-B-CCAAC orientation. However, only the local minimum lying near the triplet equilibrium structure will not be populated in the measurements because the global minimum of the singlet state is separated from the triplet equilibrium geometry by high-energy barriers. For the computed geometries (global minimum of triplet and local minimum of singlet state), the MN12L/6–311G(d,p) approach predicts an S–T gap of about –6.4 kcal mol–1 (triplet below singlet state).

To enable high-level multi-reference approaches, we then created a closely related model system 2aʹ in which we replaced the bulky substituents as indicated in Supplementary Figure 46. For this model compound, we reoptimized the carbon-heteroatom and the C–H distances of the new substituents but retained the overall geometries of the 2a systems to include the influence of steric effects on the geometry. The model system 2aʹ contains all essential binding ingredients of 2a but is sufficiently small to perform high-level NEVPT239,40/def2-TZVP benchmark calculations for the S–T gap. To compare the predicted S–T gaps, we performed single-point calculations employing the geometries described above.

The results are summarized in Supplementary Table 3. It shows that all functionals overestimate the stability of the triplet state in comparison to the better-suited multi-reference NEVPT2 approach. The errors range from about –5 kcal mol−1 to nearly –29 kcal mol−1, showing that such DFT calculations have to be handled with care.

Cartesian coordinates for all of the calculated compounds are given in Supplementary Table 4.

Magnetic methods

Temperature-dependent magnetic susceptibility measurements for 2a were carried out with a Quantum-Design MPMS-XL-5 SQUID magnetometer equipped with a 5-Tesla magnet in the range from 295 to 2.0 K at a magnetic field of 0.5 T. The powdered sample was contained in a Teflon bucket and fixed in a non-magnetic sample holder. Each raw data file for the measured magnetic moment was corrected for the diamagnetic contribution of the Teflon bucket according to Mdia(bucket) = χg × m × H, with an experimentally obtained gram susceptibility of the Teflon bucket. The molar susceptibility data were corrected for the diamagnetic contribution using Pascal’s constants56. Experimental data were modeled with the julX program57 using a fitting procedure to the spin Hamiltonian \({\hat H} = - 2J{{\hat S}_{1}}{{\hat S}_{2}} + g{{\mu}_{\rm B}}{\vec B}\left( {{{\vec S}_{1}} + {{\vec S}_{2}}} \right)\). A slightly better fit quality was obtained using an additional diamagnetic contribution (–140×10–6 cm3 mol–1) and some weak intermolecular interactions (–0.12 K). The latter were considered in a mean field approach by using a Weiss temperature Θ58. The Weiss temperature Θ (defined as Θ = zJinterS(S + 1)/3k) relates to intermolecular interactions zJinter, where Jinter is the interaction parameter between two nearest neighbor magnetic centers, k is the Boltzmann constant (0.695 cm–1 K–1), and z is the number of nearest neighbors.

Data availability

The data that support the findings of this study are available from the corresponding author on reasonable request. The X-ray crystallographic coordinates for structures reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition numbers 1567701–1567706. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via


  1. 1.

    Rauchfuss, H. Chemical Evolution and the Origin of Life (Springer-Verlag, Berlin, Heidelberg, 2008).

  2. 2.

    Millar, T. J. & Williams, D. A. Large interstellar molecules. Astrophys. Space Sci. 47, 243–248 (1977).

    ADS  Article  Google Scholar 

  3. 3.

    Sephton, M. A. Organic compounds in carbonaceous meteorites. Nat. Prod. Rep. 19, 292–311 (2002).

    CAS  Article  PubMed  Google Scholar 

  4. 4.

    Cornforth, J. W. Olefin alkylation in biosynthesis. Angew. Chem. Int. Ed. 7, 903–911 (1968).

    Article  Google Scholar 

  5. 5.

    Liebman, J. F. & Greenberg, A. A survey of strained organic molecules. Chem. Rev. 76, 311–365 (1975).

    Article  Google Scholar 

  6. 6.

    Tidwell, T. Sterically crowded organic molecules: synthesis, structure and properties. Tetrahedron 34, 1855–1868 (1978).

    CAS  Article  Google Scholar 

  7. 7.

    Dewar, M. J. S. Aromaticity and pericyclic reactions. Angew. Chem. Int. Ed. 10, 761–776 (1971).

    CAS  Article  Google Scholar 

  8. 8.

    Wilson, M. R. & Taylor, R. E. Strained alkenes in natural product synthesis. Angew. Chem. Int. Ed. 52, 4078–4087 (2013).

    CAS  Article  Google Scholar 

  9. 9.

    Abe, M. Diradicals. Chem. Rev. 113, 7011–7068 (2013).

    CAS  Article  PubMed  Google Scholar 

  10. 10.

    Fawcett, F. S. Bredt’s rule of double bonds in atomic-bridged-ring structures. Chem. Rev. 47, 219–274 (1950).

    CAS  Article  PubMed  Google Scholar 

  11. 11.

    Shea, K. J. Recent developments in the synthesis, structure and chemistry of bridgehead alkenes. Tetrahedron 36, 1683–1715 (1980).

    CAS  Article  Google Scholar 

  12. 12.

    Warner, P. M. Strained bridgehead double bonds. Chem. Rev. 89, 1067–1093 (1989).

    CAS  Article  Google Scholar 

  13. 13.

    Sakurai, H., Tobita, H., Nakadaira, Y. & Kabuto, C. Molecular and crystal structure of 1,1-bis(tert-butyldimethylsilyl)-2,2-bis(trimethylsilyl)-ethylene, the most twisted known olefin, and unusual rearrangement during its preparation. J. Am. Chem. Soc. 104, 4288–4289 (1982).

    CAS  Article  Google Scholar 

  14. 14.

    Molins, E., Miravitlles, C., Espinosa, E. & Ballester, M. 1,1’,3,3’,6,6’,8,8’-Octachloro-9,9’-bifluorenylidene and perchloro-9,9′-bifluorenylidene, two exceedingly twisted ethylenes. J. Org. Chem. 67, 7175–7178 (2002).

    CAS  Article  PubMed  Google Scholar 

  15. 15.

    ter Wiel, M. K. J., Kwit, M. G., Meetsma, A. & Feringa, B. L. Synthesis, stereochemistry, and photochemical and thermal behaviour of bis-tert-butyl substituted overcrowded alkenes. Org. Biomol. Chem. 5, 87–96 (2007).

    Article  PubMed  Google Scholar 

  16. 16.

    Takezawa, H., Murase, T. & Fujita, M. Temporary and permanent trapping of the metastable twisted conformer of an overcrowded chromic alkene via encapsulation. J. Am. Chem. Soc. 134, 17420–17423 (2012).

    CAS  Article  PubMed  Google Scholar 

  17. 17.

    Takeda, T. et al. Preparation and structure of acenaphthylene-1,2-diyldi(9-acridine) derivatives with a long C=C bond. Chem. Commun. 50, 3924–3927 (2014).

    CAS  Article  Google Scholar 

  18. 18.

    Zhang, G., Lami, V., Romginer, F., Vaynzof, Y. & Mastalerz, M. Rigid conjugated twisted truxene dimers and trimers as electron acceptors. Angew. Chem. Int. Ed. 55, 3977–3981 (2016).

    CAS  Article  Google Scholar 

  19. 19.

    Sekiguchi, A., Inoue, S., Ichinohe, M. & Arai, Y. Isolable anion radical of blue disilene (tBu2MeSi)2Si=Si(SiMetBu2)2 Formed upon one-electron reduction: synthesis and characterization. J. Am. Chem. Soc. 126, 9626–9629 (2004).

    CAS  Article  PubMed  Google Scholar 

  20. 20.

    Tanaka, R., Iwamoto, T. & Kira, M. Fused tricyclic disilenes with highly strained Si–Si double bonds: addition of a Si–Si single bond to a Si–Si double bond. Angew. Chem. Int. Ed. 45, 6371–6373 (2006).

    CAS  Article  Google Scholar 

  21. 21.

    Inoue, S., Ichinohe, M. & Sekiguchi, A. The isolable cation radical of disilene: synthesis, characterization, and a reversible one-electron redox system. J. Am. Chem. Soc. 130, 6078–6079 (2008).

    CAS  Article  PubMed  Google Scholar 

  22. 22.

    Kostenko, A. et al. Observation of a thermally accessible triplet state resulting from rotation around a main-group π bond. Angew. Chem. Int. Ed. 54, 12144–12148 (2015).

    CAS  Article  Google Scholar 

  23. 23.

    Wendel, D., Szilvási, T., Jandl, C., Inoue, S. & Rieger, B. Twist of a silicon−silicon double bond: selective anti-addition of hydrogen to an iminodisilene. J. Am. Chem. Soc. 139, 9156–9159 (2017).

    CAS  Article  PubMed  Google Scholar 

  24. 24.

    Braunschweig, H. et al. Ambient-temperature isolation of a compound with a boron-boron triple bond. Science 336, 1420–1422 (2012).

    ADS  CAS  Article  PubMed  Google Scholar 

  25. 25.

    Bissinger, P., Braunschweig, H., Damme, A., Kupfer, T. & Vargas, A. Base-stabilized diborenes: selective generation and η2 side-on coordination to silver(I). Angew. Chem. Int. Ed. 51, 9931–9934 (2012).

    CAS  Article  Google Scholar 

  26. 26.

    Braunschweig, H. & Dewhurst, R. D. Single, double, triple bonds and chains: the formation of electron-precise B–B Bonds. Angew. Chem. Int. Ed. 52, 3574–3583 (2013).

    CAS  Article  Google Scholar 

  27. 27.

    Arrowsmith, M., Braunschweig, H. & Stennett, T. E. Formation and reactivity of electron-precise B—B single and multiple bonds. Angew. Chem. Int. Ed. 56, 96–115 (2017).

    CAS  Article  Google Scholar 

  28. 28.

    Melaimi, M., Soleilhavoup, M. & Bertrand, G. Stable cyclic carbenes and related species beyond diaminocarbenes. Angew. Chem. Int. Ed. 49, 8810–8849 (2010).

    CAS  Article  Google Scholar 

  29. 29.

    Soleilhavoup, M. & Bertrand, G. Cyclic (alkyl)(amino)carbenes (CAACs): stable carbenes on the rise. Acc. Chem. Res. 48, 256–266 (2015).

    CAS  Article  PubMed  Google Scholar 

  30. 30.

    Viehe, H. G., Janousek, Z., Merenyi, R. & Stella, L. The captodative effect. Acc. Chem. Res. 18, 148–154 (1985).

    CAS  Article  Google Scholar 

  31. 31.

    Bissinger, P. et al. Isolation of a neutral boron-containing radical stabilized by a cyclic (alkyl)(amino)carbene. Angew. Chem. Int. Ed. 53, 7360–7363 (2014).

    CAS  Article  Google Scholar 

  32. 32.

    Mahoney, J. K. et al. Air-persistent monomeric (amino)(carboxy) radicals derived from cyclic (alkyl)(amino) carbenes. J. Am. Chem. Soc. 137, 7519–7525 (2015).

    CAS  Article  PubMed  Google Scholar 

  33. 33.

    Styra, S. et al. Crystalline cyclic (alkyl)(amino)carbene-tetrafluoropyridyl radical. Chem. Eur. J. 21, 8441–8446 (2015).

    CAS  Article  PubMed  Google Scholar 

  34. 34.

    Mahoney, J. K., Jazzar, R., Royal, G., Martin, D. & Bertrand, G. The advantages of cyclic over acyclic carbenes to access isolable capto-dative c-centered radicals. Chem. Eur. J. 23, 6206–6212 (2017).

    CAS  Article  PubMed  Google Scholar 

  35. 35.

    Braunschweig, H. et al. Highly strained heterocycles constructed from boron-boron multiple bonds and heavy chalcogens. Angew. Chem. Int. Ed. 55, 5606–5609 (2016).

    CAS  Article  Google Scholar 

  36. 36.

    Böhnke, J. et al. Diborabutatriene: an electron-deficient cumulene. Angew. Chem. Int. Ed. 53, 9082–9085 (2014).

    Article  Google Scholar 

  37. 37.

    Engels, B. A detailed study of the configuration selected multireference configuration-interaction method combined with perturbation-theory to correct the wave function. J. Chem. Phys. 100, 1380–1386 (1994).

    ADS  CAS  Article  Google Scholar 

  38. 38.

    Brückner, C. & Engels, B. Benchmarking singlet and triplet excitation energies of molecular semiconductors for singlet fission: tuning the amount of HF exchange and adjusting local correlation to obtain accurate functionals for singlet-triplet gaps. Chem. Phys. 482, 319 (2017).

    ADS  Article  Google Scholar 

  39. 39.

    Angeli, C., Borini, S. & Cimiraglia, R. An application of second-order n-electron valence state perturbation theory to the calculation of excited states. Theor. Chem. Acc. 111, 352 (2004).

    CAS  Article  Google Scholar 

  40. 40.

    Angeli, C., Cimiraglia, R. & Malrieu, J. P. n-electron valence state perturbation theory: a spinless formulation and an efficient implementation of the strongly contracted and of the partially contracted variants. J. Chem. Phys. 117, 9138 (2002).

    ADS  CAS  Article  Google Scholar 

  41. 41.

    Peverati, R. & Truhlar, D. G. An improved and broadly accurate local approximation to the exchange–correlation density functional: the MN12-L functional for electronic structure calculations in chemistry and physics. Phys. Chem. Chem. Phys. 10, 13171–13174 (2012).

    Article  Google Scholar 

  42. 42.

    Ditchfield, R., Hehre, W. J. & Pople, J. A. Self-Consistent molecular orbital methods. IX. Extended Gaussian-type basis for molecular-orbital studies of organic molecules. J. Chem. Phys. 54, 724–728 (1971).

    ADS  CAS  Article  Google Scholar 

  43. 43.

    Hehre, W. J., Ditchfield, R. & Pople, J. A. Self-Consistent molecular orbital methods. XII. Further extensions of Gaussian-type basis sets for use in molecular-orbital studies of organic-molecules. J. Chem. Phys. 56, 2257–2261 (1972).

    ADS  CAS  Article  Google Scholar 

  44. 44.

    Braunschweig, H. et al. Boron radical cations from the facile oxidation of electron-rich diborenes. Angew. Chem. Int. Ed. 53, 5689–5693 (2014).

    Article  Google Scholar 

  45. 45.

    Stoll, S. & Schweiger, A. EasySpin, a comprehensive software package for spectral simulation and analysis in EPR. J. Magn. Reson. 178, 42–55 (2006).

    ADS  CAS  Article  PubMed  Google Scholar 

  46. 46.

    Sheldrick, G. SHELXT - Integrated space-group and crystal-structure determination. Acta Cryst. A71, 3–8 (2015).

    MATH  Google Scholar 

  47. 47.

    Sheldrick, G. A short history of SHELX. Acta Cryst. A64, 112–122 (2008).

    Article  MATH  Google Scholar 

  48. 48.

    Zhao, Y., Schultz, N. E. & Truhlar, D. G. Design of density functionals by combining the method of constraint satisfaction with parametrization for thermochemistry, thermochemical kinetics, and noncovalent interactions. J. Chem. Theory Comput. 2, 364–382 (2006).

    Article  PubMed  Google Scholar 

  49. 49.

    Becke, A. D. Density‐functional thermochemistry. III. The role of exact exchange. J. Chem. Phys. 98, 5648–5652 (1993).

    ADS  CAS  Article  Google Scholar 

  50. 50.

    Becke, A. D. Density-functional exchange-energy approximation with correct asymptotic behavior. Phys. Rev. A 38, 3098–3100 (1988).

    ADS  CAS  Article  Google Scholar 

  51. 51.

    Lee, C., Yang, W. R. & Parr, G. Development of the colle-salvetti correlation-energy formula into a functional of the electron density. Phys. Rev. B 37, 785–789 (1988).

    ADS  CAS  Article  Google Scholar 

  52. 52.

    Perdew, J. P. Density-functional approximation for the correlation energy of the inhomogeneous electron gas. Phys. Rev. B 33, 8822–8824 (1986).

    ADS  CAS  Article  Google Scholar 

  53. 53.

    Schaefer, A., Horn, H. & Ahlrichs, R. Fully optimized contracted Gaussian basis sets for atoms Li to Kr. J. Chem. Phys. 97, 2571–2577 (1992).

    ADS  CAS  Article  Google Scholar 

  54. 54.

    Reed, A. E., Curtiss, L. A. & Weinhold, F. Intermolecular interactions from a natural bond orbital, donor-acceptor viewpoint. Chem. Rev. 88, 899–926 (1988).

    CAS  Article  Google Scholar 

  55. 55.

    Frisch, M. J. et al. Gaussian 09, Revision D.01 (Gaussian, Inc., Wallingford, CT, 2009).

  56. 56.

    Bain, G. A. & Berry, J. F. Diamagnetic corrections and Pascal’s constants. J. Chem. Educ. 85, 532–536 (2008).

    CAS  Article  Google Scholar 

  57. 57.

    Bill, E. julX (Max-Planck Institute for Chemical Energy Conversion, Mülheim/Ruhr, Germany, 2008).

  58. 58.

    Kahn, O. Molecular Magnetism (VCH Publishers Inc., New York, 1993).

Download references


Partial financial support for this project was provided by the European Research Council (ERC) under the European Union Horizon 2020 Research and Innovation Program (Boron-Boron Multiple Bonding, Advanced Grant agreement no. 669054, to H.B.), and the Deutsche Forschungsgemeinschaft Research Training Group GRK2112, Molecular Biradicals: Structure, Properties and Reactivity (H.B., B.E., and R.M.).

Author information




H.B. conceived the study. J.B., T.D., W.C.E., K.H., and M.H. performed the synthetic experiments. M.A.C., E.W., M.R., R.M., and B.E. performed the computational studies. I.K. and E.B. acquired and analyzed the EPR data. S.D. and F.M. performed the magnetic measurements. M.A.C., R.D.D., and W.C.E. prepared the manuscript. All authors read and commented on the manuscript.

Corresponding author

Correspondence to Holger Braunschweig.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Böhnke, J., Dellermann, T., Celik, M.A. et al. Isolation of diborenes and their 90°-twisted diradical congeners. Nat Commun 9, 1197 (2018).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing