Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Improved split fluorescent proteins for endogenous protein labeling


Self-complementing split fluorescent proteins (FPs) have been widely used for protein labeling, visualization of subcellular protein localization, and detection of cell–cell contact. To expand this toolset, we have developed a screening strategy for the direct engineering of self-complementing split FPs. Via this strategy, we have generated a yellow–green split-mNeonGreen21–10/11 that improves the ratio of complemented signal to the background of FP1–10-expressing cells compared to the commonly used split GFP1–10/11; as well as a 10-fold brighter red-colored split-sfCherry21–10/11. Based on split sfCherry2, we have engineered a photoactivatable variant that enables single-molecule localization-based super-resolution microscopy. We have demonstrated dual-color endogenous protein tagging with sfCherry211 and GFP11, revealing that endoplasmic reticulum translocon complex Sec61B has reduced abundance in certain peripheral tubules. These new split FPs not only offer multiple colors for imaging interaction networks of endogenous proteins, but also hold the potential to provide orthogonal handles for biochemical isolation of native protein complexes.


Self-complementing split fluorescent proteins (FPs) are split FP constructs in which the two fragments can associate by themselves to form a fully functional FP without the assistance of other protein–protein interactions. By fusing one fragment on a target protein and detecting its association with the other fragment, these constructs have demonstrated powerful applications in the visualization of subcellular protein localization1,2,3, quantification of protein aggregation4, detection of cytosolic peptide delivery5, 6, identification of cell contacts and synapses7, 8, as well as scaffolding protein assembly3, 9, 10. Recently, they have also enabled the generation of large-scale human cell line libraries with fluorescently tagged endogenous proteins through CRISPR/Cas9-based gene editing11.

So far, the most commonly used self-complementing split FP was GFP1–10D7/11M3 OPT (which we refers to as GFP1–10/11), engineered from super-folder GFP (sfGFP)12. With the splitting point between the tenth and eleventh β-strands, the resulting GFP11 fragment is a 16-amino acid (a.a.) short peptide. The corresponding GFP1–10 fragment remains almost non-fluorescent until complementation, making GFP1–10/11 well suited for protein labeling by fusing GFP11 to the target protein and over-expressing GFP1–10 in the corresponding subcellular compartments. However, there lacks a second, orthogonal split FP system with comparable complementation performance for multicolor imaging and multiplexed scaffolding of protein assembly. Previously, a sfCherry1–10/11 system3 was derived from super-folder Cherry, an mCherry variant optimized for folding efficiency13. However, its overall fluorescent brightness is substantially weaker than an intact sfCherry fusion, potentially due to its limited complementation efficiency3. Although two-color imaging with sfCherry1–10/11 and GFP1–10/11 has been done using tandem sfCherry11 to amplify the sfCherry signal for over-expressed targets, it is still too dim to detect most endogenous proteins.

In this paper, we report a screening strategy for the direct engineering of self-complementing split FPs. Using this strategy, we have generated a yellow–green-colored mNeonGreen21–10/11 (mNG2) that has an improved ratio of complemented signal to the background of FP1–10-expressing cells as compared to GFP1–10/11, as well as a red-colored sfCherry21–10/11 that is about 10 times as bright as the original sfCherry1–10/11. Further, we have engineered a photoactivatable PAsfCherry21–10/11 for single-molecule switching-based super-resolution microscopy. Using these split FPs, we have demonstrated dual-color endogenous protein tagging, which has revealed the reduced abundance of the endoplasmic reticulum (ER) translocon component Sec61B from certain peripheral ER tubules.


Engineering split FPs with the spacer-insertion strategy

Inspired by assays previously used to optimize a protease reporter9, we devised a general strategy for the engineering of self-complementing split FPs. Specifically, we inserted a 32 a.a. spacer (DVGGGGSEGGGSGGPGSGGEGSAGGGSAGGGS) between the tenth and eleventh β-strands of a fluorescent protein (Fig. 1a). This long spacer hinders the folding of the FP, which results in a fluorescence level much lower than its full length counterpart without the spacer. To improve the fluorescence, we then subjected the spacer-inserted FP to multiple rounds of directed evolution in Escherichia coli. In each round, the coding sequence was randomly mutagenized or shuffled. Then, the brightest 1 or 2 colonies from each plate were selected for the next round.

Fig. 1
figure 1

Engineering split FP constructs using the spacer-insertion strategy. a Construct design and complementation scheme of the spacer-insertion screening system. b Relative fluorescence intensities of sfGFP and GFP + spacer in E. coli colonies. c Left: schematic diagram of split mNeonGreen2 with 6 mutations highlighted in pink, illustrated on the crystal structure of lanGFP. Right: relative fluorescence intensities of mNG, mNG + spacer, mNG2 + spacer in E. coli colonies. d Left: schematic diagram of split sfCherry2 with 3 mutations highlighted in yellow, illustrated on the crystal structure of sfCherry. Right: relative fluorescence intensities of sfCherry, sfCherry2 + spacer, sfCherry + spacer in E. coli colonies. For each bar in all bar graphs, Number of colonies > 400 and error bars are standard deviations

We first aimed to produce a green-colored split FP that has improved brightness compared to GFP. A recent quantitative assessment of FPs14 reported that the brightness of mNeonGreen (mNG)15, a yellow–green fluorescent protein derived from Branchiostoma Lanceolatum, is more than 2 times higher than sfGFP. mNG also demonstrates good photostablility, acid tolerance and monomeric quality. Guided by the crystal structure of the closely related lanGFP (PDB: 4HVF), we chose to split between tenth and eleventh β-strands of mNG and removed the additional GFP-like C terminus (GMDELYK), resulting in a 213-amino acid fragment which we called mNG1–10 and a 16-amino acid, mNG11. Unlike the highly optimized12 split GFP1–10/11 system, whose fluorescence signal is only slightly reduced with the spacer insertion (Fig. 1b), inserting the spacer between mNG1–10 and mNG11 drastically reduced its fluorescence signal (Fig. 1c). Using our spacer-assisted screening system, after three rounds of random mutagenesis, we identified five substitutions in the 1–10 fragment (K128M, S142T, R150M, G172V, and K213M) and one substitution in eleventh strand (V15M) (Fig. 1c). We named this improved mNG, mNG2. In E. coli colonies grown on LB-agar plates, spacer-inserted mNG2 demonstrated a 10-fold improvement in brightness after directed evolution, which is ~60% as bright as a full length mNG (Fig. 1c).

To improve the complementation efficiency of split sfCherry, we subjected the spacer-inserted sfCherry to three rounds of random mutagenesis and one round of DNA shuffling. We identified a new variant, named sfCherry2, which contains two mutations on the 1–10 fragment (E118Q and T128I) and one on the eleventh strand (G12A) (Fig. 1d). In E. coli colonies, spacer-inserted sfCherry2 is ~9 times as bright as the spacer-inserted original sfCherry (Fig. 1d). We have also used this strategy to split FusionRed, a red fluorescent protein with minimal cell toxicity and dimerization tendencies16. Unfortunately, we have not been able to obtain a brightly fluorescent, spacer-inserted variant even after four rounds of random mutagenesis.

Protein labeling by mNG21–10/11 in mammalian cells

To test protein labeling using mNG211, we expressed two proteins, histone H2B (H2B) or clathrin light chain A (CLTA) fused to mNG211 in HeLa cells. With the co-expression of mNG21–10, we could correctly image the localization of these proteins, similar to that using GFP11 (Fig. 2a). Interestingly, when GFP1–10 is expressed by itself, we observed a weak but non-negligible fluorescence background even without the expression of GFP11 fragment. Comparing HEK 293T cell lines stably expressing GFP1–10 from the strong SFFV promoter and the weak PGK promotor, we found that the background is positively correlated with the GFP1–10 expression level (Fig. 2b). This background might be attributed to either weak fluorescence from GFP1–10 or elevated cell autofluorescence caused by GFP1–10 expression. In contrast, even when using the SFFV promoter, the signal from mNG21–10-expressing cells is indistinguishable from wild-type cell autofluorescence (Fig. 2b).

Fig. 2
figure 2

Protein labeling through transient expression or endogenous knock-in using mNG211. a Fluorescence images of HeLa cells co-expressing either mNG211 or GFP11 labeled H2B or CLTA with the corresponding FP1–10. Scale bars are 10 μm. b FACS backgroud from wild-type HEK 293T cells, or HEK 293T cells stably expressing GFP1–10 (using the stong SFFV promoter or the weak PGK promoter) or mNG21–10 (using SFFV). c Comparison of tagging endogenous LMNA, RAB11A, and CLTA using mNG211 or GFP11 knock-in in SFFV-mNG21–10 and PGK-GFP1–10 cells, respectively, (flow cytometry histograms) and the corresponding confocal images of mNG211 knock-in cells. Scale bars are 10 μm. d Comparison of tagging a low-abundance endogenous protein SPTLC1 through mNG211 or GFP11 knock-in (flow cytometry histograms). e Whole cell fluorescence intensity of full length mNG2 and mNG211-CLTA/mNG21–10, measured by flow cytometry and normalized for expression level by mIFP fluorescence signal. Number of cells > 6000

This low background fluorescence from mNG21–10 is important for the labeling of endogenous proteins using FP11 knock-in. Previously, utilizing the small GFP11 tag we have developed a scalable scheme to fluorescently tag endogenous proteins in human cell lines by gene editing using electroporation of Cas9/sgRNA ribonucleoprotein (RNP) and a single-stranded donor DNA, followed by enrichment of integrated cells by fluorescence activated cell sorting (FACS)11. Similar to GFP11, mNG211 is also a 16 a.a. peptide, allowing its DNA and the homology arms to fit in a 200 nucleotide (nt) donor DNA that can be directly obtained from commercial synthesis, which is a key contributor to the efficiency and cost-effectiveness of our method. We compared genetic knock-in using GFP11 or mNG211 for three targets: Lamin A/C (LMNA, inner nuclear membrane), RAB11A and CLTA. In all three cases, we observed similar or stronger fluorescence from mNG211 knock-in cells than GFP11 knock-in cells. The background from non-integrated cells is substantially lower from mNG21–10, despite the use of the low expression PGK GFP1–10 and high expression SFFV mNG21–10. This better separation between FP11-integrated and non-integrated cells is especially advantageous for labeling low-abundance proteins, for example, SPTLC1 (Serine Palmitoyltransferase Long Chain Base Subunit 1) (Fig. 2d).

Finally, to compare the brightness of mNG211 with that of full length mNG2 on proteins, we constructed plasmids encoding `full length mNG2 or mNG211-CLTA fused to mIFP17 through a self-cleaving P2A site, so that expression level differences can be normalized by mIFP signal level. We cotransfected HEK 293T cells with either of the two plasmids and a plasmid expressing mNG21–10. With 11:1–10 transfected DNA ratio increased from 1:1 to 1:3 and 1:5, the normalized whole cell fluorescence by flow cytometry from mNG211 is approximately 50–60% of that from full length mNG2 (Fig. 2e). This relative brightness likely indicates the overall effect of complementation efficiency, chromophore maturation and potential purtubation to chromophore environment by the protein split. For reference, we performed the same measurement on GFP11 and observed a brightness close to that of the full length sfGFP (Supplementary Fig. 1).

Protein labeling using sfCherry21–10/11 in mammalian cells

To quantify the improvement of sfCherry21–10/11 over sfCherry1–10/11 for mammalian protein labeling and compare their performances with that of full length sfCherry and sfCherry2, we performed a similar measurement as in the previous section. We used TagBFP instead of mIFP for expression level normalization because sfCherry fluorescence bleeds into the mIFP detection channel (Fig. 3a). We found that sfCherry21–10/11 is ~10 times as bright as sfCherry1–10/11 in mammalian cells. We have also observed that full length sfCherry2 is ~50% brighter than sfCherry13, suggesting a better overall folding efficiency. The normalized fluorescence signal of sfCherry21–10/11 reached ~30% of full length sfCherry and ~20% of full length sfCherry2.

Fig. 3
figure 3

Protein labeling and imaging using sfCherry211. a Whole cell fluorescence intensity of HEK 293T cells expressing full length sfCherry, full length sfCherry2, sfCherry1–10/11 or sfCherry21–10/11, measured by flow cytometry and normalized for expression level by TagBFP fluorescence signal. Number of cells > 2500. Error bars are s.e.m. bi Confocal images of sfCherry211 labeling in HeLa cells cotransfected with sfCherry21–10: keratin b, intermediate filament); histone H2B c, nuclear); zyxin d, focal adhesion); TOMM20 e, mitochondria outer membrane); β-actin f, actin cytoskeleton); heterochromatin protein 1 g, nuclear); clathrin light chain A h, clathrin-coated pits); vimentin i, intermediate filament). j Confocal image of endogenous Sec61B (ER) labeled by sfCherry211 in HEK 293T cells stably expressing sfCherry21–10. Scale bars are 10 μm

To test sfCherry211 as a fluorescent tag for live-cell imaging, we constructed mammalian expression vectors encoding target proteins tagged with sfCherry211 at either the N or C terminus and co-expressed each with cytoplasmic sfCherry21–10 in HeLa cells (Fig. 3b–i). For the diverse array of target proteins tested, including nuclear proteins histone H2B and heterochromatin protein 1 (HP1), cytoskeletal proteins β-actin, keratin and vimentin, focal adhesion protein zyxin, CLTA, and mitochondrial outer membrane protein TOMM20, we observed their correct localization. No fluorescent signal was detected with the sfCheryr21–10 fragment alone.

We also demonstrated sfCherry211 labeling of endogenous proteins by knocking it into the ER translocon complex protein Sec61B in HEK 293T cells stably expressing both GFP1–10 and sfCherry21–10 (293 Tdouble1–10). After sorting for red-fluorescence-positive cells by FACS, confocal imaging (Fig. 3j) confirmed the ER specificity of the sfCherry211 signal, which is substantially weaker than the other overexpression cases (Fig. 3b–i). We noticed that many cells also display additional punctate structures, which we have verified to be lysosomes (see the last result section). This artifact is common for mCherry-derived FPs when expressed for a prolonged period of time, especially when targeting proteins in secretory pathways18. It likely results from the fact that mCherry has a β-barrel structure resisting lysosomal proteolysis and a low pKa, such that it remains fluorescent in the acidic lysosome lumen19. We have not observed lysosome labeling in any of the non-ER targets that we have imaged in this work with sfCherry211 labeling.

Super-resolution microscopy using PAsfCherry21–10/11

With their capability to change their fluorescence properties upon light (usually ultraviolet) irradiation, photoactivatable (PA) FPs20 enable tracking of protein trafficking and imaging of labeled proteins using single-molecule switching-based super-resolution microscopy21 (more commonly known as stochastic optical reconstruction microscopy, STORM, or photoactivated localization microscopy, PALM). Previously, mCherry has been engineered into a PA FP (PAmCherry1) after introducing 10 a.a. substitutions22. Because these substitutions are located on the 1–10 fragment, we merged them with the sequence of sfCherry21–10 (designated as PAsfCherry21–10). When imaging HEK 293T cells co-expressing sfCherry211-H2B and PAsfCherry21–10, we observed little initial fluorescence in red channel and a large fluorescence increase after 405 nm light irradiation (Fig. 4a), confirming the photoactivation property of complemented sfCherry211 and PAsfCherry21–10.

Fig. 4
figure 4

Photoactivatable sfCherry21–10/11 and its use in super-resolution microscopy. a Photoactivation of H2B labeling in HEK 293  T cells cotransfected with sfCherry211-H2B and PAsfCherry21–10. Scale bars: 10 μm. b Conventional wide-field fluorescence image (left) and super-resolution image (middle/right) of endogenous CLTA. c Histogram of photon number detected per photoactivation event in b

Combining PAsfCherry21–10 with our FP11 tag knock-in method, we can easily perform STORM imaging of endogenous proteins tagged by sfCherry11, which could avoid potential overexpression artifacts. For demonstration, we imaged endogenous CLTA in HEK 293 T cells. Because PAsfCherry2 is non-fluorescent before activation, we knocked-in a tandem GFP11-sfCherry211 tag in HEK 293T cells stably expressing GFP1–10, so that integrated cells can be isolated using GFP fluorescence signal. We then transfected these cells with PAsfCherry21–10 plasmid for STORM imaging. Compared to conventional wide-field images, clathrin-coated pits can be clearly seen as sub-diffraction-limit objects in the STORM images (Fig. 4b). We were able to collect on average 260 photons in each photoactivation event (Fig. 4c). We note that the labeling of most pits is incomplete, potentially because we labeled only one of the two clathrin light chain genes that have nearly identical functionalities23. In addition, non-homozygous knock-in and inefficient complementation between the two fragments can further contribute to the incomplete labeling. Selecting for homozygous knock-in cells and/or the use of tandem sfCherry211 tags3 may solve the latter two problems.

Dual-color endogenous protein tagging in human cells

The orthogonal sfCherry211 now enables two-color imaging of endogenous proteins in order to visualize their differential spatial distribution and interactions. We tested double knock-in of GFP11 and sfCherry211 either sequentially or simultaneously in HEK 293T cells stably expressing both GFP1–10 and sfCherry21–10 (293 Tdouble1–10). For sequential knock-in, we first performed electroporation of Cas9 RNP and single-strand donor DNA for GFP11, sorted GFP positive cells by FACS, and then knocked-in sfCherry211, followed by a second round of sorting (Fig. 5a). We targeted Sec61B using GFP11 and then three proteins with distinctive subcellular localizations using sfCherry211: LMNA, ARL6IP1 (tubular ER), and Sec61B (to verify co-localization). When imaging the double knock-in cells by confocal microscopy, we observed co-labeling of the nuclear envelop by Sec61B-GFP11 and LMNA-sfCherry211, almost complete co-localization of Sec61B-GFP11 and Sec61B-sfCherry211, and the exclusion of ARL6IP1-sfCherry211 from the nuclear envelope (Fig. 5b).

Fig. 5
figure 5

Double labeling and dual-color imaging of endogenous proteins using GFP11 and sfCherry211. a Schemetic diagram for double labeling endogenous proteins through a sequential knock-in strategy. b Dual-color fluorescence images of GFP11/sfCherry211 sequential knocked-in cells. c Schemetic diagram double labeling endogenous proteins through a simultaneous knock-in strategy. d Dual-color fluorescence images of GFP11/sfCherry211 simultaneous knocked-in cells. Scale bars are 10 µm

For simultaneous knock-in, we mixed Cas9 RNPs and donor DNAs for both targets in one electroporation reaction and used FACS to enrich cells positive for both green and red signal (Fig. 5c). We chose to tag ARL6IP1 and Sec61B with GFP11 and sfCherry211, respectively. We obtained 0.4% double-positive cells, consistent with the multiplication of the 28 and 1.2% efficiency for GFP11 and sfCherry211 single knock-in into the ARL6IP1 and Sec61B gene, respectively (Supplementary Fig. 2). The lower efficiency for sfCherry211 knock-in could be attributed to its overall lower fluorescence signal level compared to GFP11, making it more difficult to distinguish from the background by FACS. Confocal microscopy of sorted cells showed similar arrangement of the two proteins (Fig. 5d) as in Sec61B-GFP11, ARL6IP1-sfCherry211 sequential knock-in.

Dual-color images reveal peripheral ER with reduced Sec61B

The endoplasmic reticulum (ER) is a large organelle that spreads throughout the cytoplasm as a continuous membrane network of tubules and sheets with a single lumen24. The Sec61 complex, which is composed of alpha, beta, and gamma subunits, is the central component of the protein translocation apparatus of the ER membrane25. Researchers have traditionally used Sec61B as an ER marker for imaging because it is thought to be distributed ubiquitously throughout the ER membrane, including nuclear envelope, sheet-like cisternae, and a polygonal array of tubules26, 27. However, our dual-color images of endogenous Sec61B and ARL6IP1 in HEK 293 T cells using GFP11 and sfCherry211, showed that certain peripheral ER tubules marked by ARL6IP1 contain very weak to non-detectable Sec61B signal (Fig. 6a). This large reduction of Sec61B signal in certain ER tubules is clearly visible in cross-section, where the Sec61B signal is at the background level despite Sec61B having the brighter GFP11 label than sfCherr211 on ARL6IP1 (Fig. 6b). We have also ruled out the presence of sfCherry2-containing lysosomes in these areas by staining lysosomes with lysotracker (Supplementary Fig. 3). By visual inspection in z maximum projects of 9 confocal images containing a total of 108 cells, we identified that 29 of them contain such peripheral ER tubules lacking strong Sec61B presence. Furthermore, we confirmed this differential distribution of ER membrane proteins by swapping the tags on the two proteins (Fig. 6c).

Fig. 6
figure 6

Reduced abundance of Sec61B in certain peripheral ER tubules. a Dual-color image of a Sec61B-GFP11 and ARL6IP1-sfCherry211 knock-in HEK 293  T cell. Arrows indicate ER tubules marked by ARL6IP1 but contain much reduced Sec61B signal. b A cross-section in a, with red arrows indicating petipherial ER tubules with Sec61B signal at the background level, green arrows indicating ER tubules positive for both Sec61B and ARL6IP1, and the black arrow indicating a lysosome marked by LysoTracker Blue. c Dual-color image of a Sec61B-sfCherry211 and ARL6IP1-GFP11 knock-in HEK 263 T cell. Scale bars are 5 µm


In summary, we have devised a simple platform for the engineering of self-complementing split fluorescence proteins. Using this platform, we have developed a bright yellow–green-colored mNG21–10/11 system and substantially increased the performance of the red-colored sfCherry21–10/11. These split constructs have allowed us to obtain two-color or super-resolution images of endogenous proteins and have revealed ER tubules with greatly reduced abundance of the translocon component Sec61B.

Our platform can be easily extended to the engineering of other self-complmenting split FPs with distinct colors (e.g., mTurquoise2, mTagBFP2)28, 29, good photoactivation performance (e.g., mMaple3, PATagRFP)30, 31, or new functionalities (e.g., pH sensitivity)32. We note that for non-self-complementing split FPs, which are used to detect protein–protein interactions in bimolecular fluorescence complementation (BiFC) assays33, a different engineering platform is needed to ensure minimum affinity between the two FP fragments by themselves. On the other hand, although our optimizated spacer-inserted sfCherry2 has already reached the brightness level of sfCherry without spacer, split sfCherry21–10/11 is still much dimmer compared to full length sfCherry. Further improvement could be possible using a longer or more rigid spacer, which adds more spatial hindrince to complemetation, or a spacer containing the self-cleaving P2A site, which better mimicks the actual split system.

With its higher ratio of complemented signal to the background of FP1–10-expressing cells compared to GFP1–10/11, our mNG21–10/11 system will be advantageous for tagging low-abundance endogenous proteins3. More importantly, it provides an orthogonal handle for scaffolding protein oligomerization3 and biochemical isolation of native protein complexes11. For the sfCherry21–10/11 system, the fact that we have only observed lysosome puncta when labeling ER proteins suggests that this problem could be potentially resolved by increasing its pKa with rational designs32. Moreover, our engineering platform can be easily adapted to generating other red split FPs based on novel bright FPs such as TagRFP-T34, mRuby335, or mScarlet36.

Given the wide use of Sec61B as a marker to label the entire ER, it is surprising that Sec61B has a substantially reduced abundance in certain peripheral tubular structures labeled by ARL6IP1. It is possible that these tubules, often containing a closed end pointing toward the edge of the cell, serve distinct functions from other ER tubules. Further analysis of their protein compositions and contacts with plasma membrane, cytoskeleton and other organelles may help clarify their functional roles. This observation also suggests that the base of these ER tubules may contain a diffusion barrier that hinders the crossing of Sec61B. Because over-expressing exogenous ER shaping proteins can drastically alter ER morphology37, this finding highlights the opportunity of visualizing endogenous proteins to study native interaction networks.


Mutagenesis and screening

The amino acid sequence of mNG was obtained from the published literature15. Because the crystal structure of mNG has not been determined, we used the lanGFP (PDB: 4HVF) structure as a guide to decide splitting between K213 and T214 at the middle of the loop between tenth and eleventh β-strands. And we also removed the additional seven-residue GFP-like C terminal (GMDELYK) to minimize the size of mNG11 tag. The amino acid sequence of sfCherry and the split site were from our previous published literature3. The spacer-inserted split mNG and split sfCherry were subjected to random mutagenesis using a GeneMorph II Random Mutagenesis Kit (Agilent). The cDNA library pool was transformed into E. coli BL21 (DE3) electrocompetent cells (Lucigen) by electroporation using the Gene Pulser Xcell Electroporation Systems (BioRad). The expression library was plated on nitrocellulose membrane (Whatman, 0.45 µm pore size), which was sitting on an LB-agar plate with 30 mg/ml kanamycin. After overnight growth at 37 °C, the nitrocellulose membrane was transferred to a new LB-agar plate containing 1 mM isopropyl-β-D-thiogalactoside (IPTG) and 30 mg/ml kanamycin and cultured for 3–6 h at 37 °C to induce the protein expression. Clone screening was performed by imaging the second LB-agar plate using a BioSpectrum Imaging System (UVP). The brightest candidates in each library were pooled (typically 20–30 selected from ~10,000 colonies) and used as templates for the next round of evolution. For DNA shuffling, we used the method described by Yu et al38. Specifically, we digested plasmids containing spacer-inserted sfCherry1–10/11 variants with BamHI and XhoI. Fragments of ~800 bp were purified from 1% agarose gels using zymoclean gel DNA gel recovery kit (Zymo Research). The DNA concentrations were measured and the fragments were mixed at equal amounts for a total of ~2 µg. The mixture was then digested with 0.5 unit DNase I (New England Biolabs) for 13 min and terminated by heating at 95 °C for 10 min. The DNase I digests were run on a 2% agarose gel, and the size of 50–100 bp fragments were cut out and purified. Ten microliter of purified fragments was added to 10 µl of Phusion High-Fidelity PCR Master Mix and reassembled with a PCR program of 30 cycles, with each cycle consisting of 95 °C for 60 s, 50 °C for 60 s, and 72 °C for 30 s. After gene reassembly, 1 µl of this reaction was amplified by PCR. The shuffled library was expressed and screened as described above. After the directed evolution was saturated, the brightest clone was selected and the DNA sequences of the constructs were confirmed by sequencing (Quintara Biosciences).

Molecular cloning

The screening construct was expressed from a pET28a bacterial expression vector and contained a 32-residue spacer (DVGGGGSEGGGSGGPGSGGEGSAGGGSAGGGS) between tenth and eleventh β-strands of FPs. The DNA sequences of mNG1–10_32aaspacer_mNG11 and sfCherry1–10_32aaspacer_sfCherry11 were directly synthesized (Integrated DNA Technologies, IDT). For the nucleotide sequence of identified final mutants of mNG21–10/mNG211 and sfCherry21–10/sfCherry211, Supplementary Table 1.

The DNAs of mNG211 and sfCherry211 were PCR amplified from identified pET28a constructs (final mutants) using Phusion High-Fidelity DNA Polymerase (Thermo Scientific). The DNAs of histone H2B, clathrin light chain A, keratin, β-actin, zyxin, heterochromatin protein 1, TOMM20, vimentin, laminB, mIFP were subcloned from mEmerald, sfGFP or mIFP fusion plasmids (cDNA source: the Michael Davidson Fluorescent Protein Collection at the UCSF Nikon Imaging Center). The P2A sequence used for all mIFP constructs are GCTACTAACTTCAGCCTGCTGAAGCAGGCTGGAGACGTGGAGGAGAACCCTGGACCT. We performed the following restriction enzyme digestion (amino acid linker length shown in parentheses for each): histone H2B (10 a.a.): sfGFP sequence between AgeI and BglII (sfGFP-H2B-C-10); clathrin light chain A (15 a.a.): mEmerald sequence between AgeI and BglII (mEmerald-Clathrin-15); keratin (18 a.a): mEmerald sequence between BamHI and NotI (mEmerald-Keratin14-N-18); b-actin (18 a.a.): mEmerald sequence between AgeI and BglII (mEmerald-Actin-C-18); zyxin (6 a.a.): sfGFP sequence between BamHI and NotI (sfGFP-Zyxin-6); TOMM20 (20 a.a.): mEmerald sequence between BamHI and NotI (mEmerald-TOMM20-N-10); vimentin (9 a.a.): mEmerald sequence between BamHI and NotI (mEmerald-Vimentin-N-18); laminB (10 a.a.): mEmerald sequence between AgeI and BglII (mEmerald-LaminB1-10). PCR amplified mNG211 and sfCherry211 were then ligated with the digested vectors using In-Fusion HD Cloning kit (Clontech). For the mammalian expression and lentiviral production, DNAs of mNG21–10 or sfCherry21–10 were directly PCR amplified from identified pET28a constructs (final mutants) and cloned into pcDNA3.1 vectors (HindIII/BamHI) as well as lentiviral pHR-SFFV vector (BamHI/NotI).

To generate the split PAsfCherry2, we introduced 10 photoactivation point mutations (based on PAmCherry1 sequence from literature22) to the sfCherry21–10 sequence and cloned the synthesized the PAsfCherry21–10 fragment into a pcDNA3.1 vector. Those substitutions are: E26V/A58T/K69N/L84F/N99K/S148L/I165V/Q167P/L169V/I203R. For the complete nucleotide sequence of PAsfCherry21–10, Supplementary Table 1.

Cell culture and generation of stable cell lines

Human HEK 293 T and human HeLa cells (obtained from UCSF Cell Culture Facility) were maintained in Dulbecco’s Modified Eagle Medium (DMEM) with high glucose (UCSF Cell Culture Facility), supplemented with 10% (vol/vol) FBS and 100 µg/ml penicillin/streptomycin (UCSF Cell Culture Facility). All cells were grown at 37 °C and 5% CO2 in a humidified incubator. Both cell lines have been tested to be free of mycoplasma contamination. For the lentiviral production, HEK 293T cells were plated into 6-well plates 1 day prior to transfection. A quantity of 110 ng of pMD2.G plasmid, 890 ng of pCMV-dR8.91 plasmid and 1000 ng of the lentiviral plasmid (pSFFV-mNG21–10, pSFFV-GFP1–10 or pSFFV-sfCherry21–10) were cotransfected into HEK 293T in each well using FuGENE HD (Promega) following the manufacturer’s recommended protocol. Lentivirus was collected 48 h after transfection and were stored immediately in −80 °C freezer for future use. To generate the HEK 293T cells stably expressing (1) mNG21–10 or (2) both GFP1–10 and sfCherry21–10 (293Tdouble1–10), HEK 293T cells were infected with (1) pSFFV-mNG21–10 or (2) both pSFFV-GFP1–10 and pSFFV-sfCherry21–10 lentiviruses. Forty-eight hours after infection, we transiently transfected them with (1) mNG211-H2B plasmid or (2) GFP11-H2B and sfCherry211-H2B plasmids in order to isolate cells with successful lentiviral integration of (1) mNG21–10 or (2) GFP1–10 and sfCherry21–10 by FACS.

Sample preparation and data analysis in flow cytometry

To characterize the complementation efficiency of split mNG2 and split GFP, we made pSFFV-mIFP_P2A_FP[full length] and pSFFV-mIFP_P2A_FP11-CLTA constructs. Corresponding to each bar in Fig. 2e and Supplementary Fig. 1a, HEK 293 T cells grown on 48-well plate (Eppendorf) were cotransfected with (1) 80 ng pSFFV-mIFP_P2A_mNG2[full length] with 80 ng pSFFV-mNG21–10, (2) 80 ng pSFFV-mIFP_P2A_mNG211-CLTA with 80 ng pSFFV-mNG21–10, (3) 80 ng pSFFV-mIFP_P2A_mNG211-CLTA with 160 ng pSFFV-mNG21–10, (4) 80 ng pSFFV-mIFP_P2A_mNG211-CLTA with 240 ng pSFFV-mNG21–10. (5) 80 ng pSFFV-mIFP_P2A_sfGFP[full length] with 80 ng pSFFV-GFP1–10, (6) 80 ng pSFFV-mIFP_P2A_GFP11-CLTA with 80 ng pSFFV-GFP1–10, (7) 80 ng pSFFV-mIFP_P2A_GFP11-CLTA with 160 ng pSFFV-GFP1–10, (8) 80 ng pSFFV-mIFP_P2A_GFP11-CLTA with 240 ng pSFFV-GFP1–10. We varied the ratio of FP11 fragment to FP1–10 fragment from 1:1 to 1:3 to 1:5, to verify the saturation of complementation.

To characterize the increased fluorescence intensity of split sfCherry2 vs. original split sfCherry, we made pSFFV-FP_TagBFP and pSFFV-FP11_TagBFP constructs. Corresponding to each bars in Fig. 3a, HEK 293 T cells grown on 24-well plate (Eppendorf) were transfected using with (1) 500 ng pSFFV-sfCherry_TagBFP, (2) 500 ng pSFFV-sfCherry2_TagBFP, (3) 500 ng pSFFV-sfCherry11_TagBFP with 500 ng pSFFV-sfCherry1–10, (4) 500 ng pSFFV-sfCherry11_TagBFP with 1000 ng pSFFV-sfCherry1–10, (5) 500 ng pSFFV-sfCherry11_TagBFP with 1500 ng pSFFV-sfCherry1–10, (6) 500 ng pSFFV-sfCherry211_TagBFP with 500 ng pSFFV-sfCherry21–10, (7) 500 ng pSFFV-sfCherry211_TagBFP with 1000 ng pSFFV-sfCherry21–10, (8) 500 ng pSFFV-sfCherry211_TagBFP with 1500 ng pSFFV-sfCherry21–10.

Analytical flow cytometry was carried out on a LSR II instrument (BD Biosciences) and cell sorting on a FACSAria II (BD Biosciences) in Laboratory for Cell Analysis at UCSF. Flow cytometry data analysis (gating and normaliztion) was done using the FlowJo software (FlowJo LLC) and plotted in GraphPad Prism.

Fluorescence microscopy

We transfected human HeLa cells grown on an 8-well glass bottom chamber (Thermo Fisher Scientific) using FuGene HD (Promega). In order to achieve better cell attachment, 8-well chamber was coated with Fibronectin (Sigma-Aldrich) for 1 h before seeding cells. Total plasmid amount of 120 ng per well with the FP11 to FP1–10 ratio in 1:2 was used to achieve optimal labeling. Thirty-six to forty-eight hours after transfection, live cells were imaged and then fixed with 4% paraformaldehyde. For lysosome staining, LysoTracker Blue DND-22 (Thermo Fisher Scientific) was added directly to the culture medium (50 nM final concentration) and incubate for 30 min before imaging.

Most of live-cell imaging was acquired on an inverted Nikon Ti-E microscope (UCSF Nikon Imaging Center), a Yokogawa CSU-W1 confocal scanner unit, a PlanApo VC 100x/1.4NA oil immersion objective, a stage incubator, an Andor Zyla 4.2 sCMOS or an Andor iXon Ultra DU888 EMCCD camera and MicroManager software. PAsfCherry2 photoactivation in H2B labeling and split mNG2 vs. split GFP comparison in H2B labeling were imaged on a Nikon Ti-E inverted wide-field fluorescence microscope equipped with an LED light source (Excelitas X-Cite XLED1), a 100X NA 1.40 PlanApo oil immersion objective, a motorized stage (ASI) and an sCMOS camera (Hamamatsu Flash 4.0). Microscopy images were subjected to background subtraction using a rolling ball radius of 100 pixels in ImageJ Fiji39 software. Analysis of conventional fluorescence microscopy images were performed in ImageJ.

STORM image acquisition and analysis

Super-resolution images were collected using a TIRF-STORM microscope, home-built from a Nikon Eclipse Ti-E inverted microscope. A 405 nm activation laser (OBIS 405, Coherent), 488 nm imaging laser (OBIS 488, Coherent) and a 561 nm imaging laser (Sapphire 561, Coherent) were aligned, expanded, and focused at the back focal plane of the UPlanSApo 1.4NA 100X oil immersion objective (Olympus). Images were recorded with an electron multiplying CCD camera (iXon + DU897E-C20-BV, Andor), and processed with a home-written software. The OBIS lasers were controlled directly by the computer whereas the Sapphire 561 nm laser was shuttered using an acoustic optical modular (Crystal Technology). A quadband dichroic mirror (ZT405/488/561/640rpc, Chroma) and a band-pass filter (ET525/50 m, Chroma for 488 nm and ET595/50 nm, Chroma for 561 nm) separated the fluorescence emission from the excitation light. Because PAsfCherry2 is initially in a dark state, knock-in cells were carefully located through GFP, using low green intensity (11 μW) and a wide-field setting (5 Hz), so as to minimize potential bleaching of PAsfCherry2. Cells were then subjected to STORM imaging, and if fluorophores appeared in the red channel, it was clear that they were indeed expressing both fluorescent proteins. Maximum laser power used during STORM measured before the objective was 16 μW for 405 nm and 25 mW for 561 nm. By increasing the power on the 405 nm laser (zero to 16 μW) during imaging, PAsfCherry2 was photoconverted from a dark to a red state, and could be observed as single fluorophores. These images were recorded at a frame rate of 30 Hz, with an EMCCD camera gain of 60. During image acquisition, the axial drift of the microscope stage was stabilized by a home-built focus stabilization system utilizing the reflection of an IR laser off the sample. Frames were collected until sample was bleached. Analysis of the STORM images was performed on the Insight3 software40. Cells were imaged in PBS buffer.

Preparation and electroporation of Cas9/sgRNA RNP

All synthetic nuclei acid reagents were purchased from Integrated DNA Technologies (IDT). sgRNAs and Cas9/sgRNA RNP complexes were prepared using the following procedure11. sgRNAs were obtained by in vitro transcribing DNA templates containing a T7 promoter (TAATACGACTCACTATAG), the gene-specific 20-nt sgRNA sequence and a common sgRNA scaffold region. DNA templates were generated by overlapping PCR using a set of 4 primers: 3 primers common to all reactions (forward primer T25: 5′-TAA TAC GAC TCA CTA TAG-3′; reverse primer BS7: 5′-AAA AAA AGC ACC GAC TCG GTG C-3′ and reverse primer ML611: 5′-AAA AAA AGC ACC GAC TCG GTG CCA CTT TTT CAA GTT GAT AAC GGA CTA GCC TTA TTT AAA CTT GCT ATG CTG TTT CCA GCA TAG CTC TTA AAC-3′) and one gene-specific primer (forward primer 5′-TAA TAC GAC TCA CTA TAG NNN NNN NNN NNN NNN NNN NNG TTT AAG AGC TAT GCT GGA A-3′). For each template, a 100-μL PCR was performed with iProof High-Fidelity Master Mix (BioRad) reagents with the addition of 1 μM T25, 1 μM BS7, 20 nM ML611, and 20 nM gene-specific primer. The PCR product was purified and eluted in 12 μL of RNAse-free DNA buffer (2 mM Tris pH 8.0 in DEPC-treated water). Next, a 100-μL in vitro transcription reaction was performed with 300 ng DNA template and 1000 U of T7 RNA polymerase in buffer containing 40 mM Tris pH 7.9, 20 mM MgCl2, 5 mM DTT, 2 mM spermidine and 2 mM of each NTP (New England BioLabs). Following a 4 h incubation at 37 °C, the sgRNA product was purified and eluted in 15 μL of RNAse-free RNA buffer (10 mM Tris pH 7.0 in DEPC-treated water). The sgRNA was quality-checked by running 5 pg of the product on a 10% polyacrylamide gel containing 7 M urea (Novex TBE-Urea gels, Thermo Fisher Scientific).

For the knock-in of mNG211, sfCherry211, or GFP11, 200-nt homology-directed recombination (HDR) templates were ordered in single-stranded DNA (ssDNA) form as ultramer oligos (IDT). For knock-in of GFP11-sfCherry211in tandem, HDR template was ordered in double-stranded (dsDNA) form as gBlock fragments (IDT) and processed to ssDNA as described below. For the complete set of DNA sequence used for sgRNA in vitro transcription or HDR templates, see Supplementary Tables 2 and 3.

Cas9 protein (pMJ915 construct, containing two nuclear localization sequences) was expressed in E. coli and purified by the University of California Berkeley Macrolab41. 293T mNG21–10 stable cells or 293Tdouble1–10 cells were treated with 200 ng/mL nocodazole (Sigma) for ~15 h before electroporation to increase HDR efficiency42. Cas9/sgRNA RNP complexes were assembled with 100 pmol Cas9 protein and 130 pmol sgRNA just prior to electroporation and combined with HDR template in a final volume of 10 μL. Electroporation was carried out in Amaxa 96-well shuttle Nuleofector device (Lonza) using SF-cell line reagents (Lonza). Nocodazole-treated cells were resuspended to 104 cells/μL in SF solution immediately prior to electroporation. For each sample, 20 μL of cells was added to the 10 μL RNP/template mixture. Cells were immediately electroporated using the CM130 program and transferred to 24-well plate with pre-warmed medium. Electroporated cells were cultured for 5–10 days prior to FACS selection of integrated cells.

Preparation of sfCherry211-GFP11-CLTA ssDNA Template

sfCherry211-GFP11-CLTA ssDNA template was prepared from a commercial dsDNA fragment (gBlock, IDT) containing the template sequence preceded by a T7 promoter11. The dsDNA fragment was amplified by PCR using Kapa HiFi reagents (Kapa Biosystems) and purified using SPRI beads (AMPure XP resin, Beckman Coulter) at a 1:1 DNA:resin volume ratio (following manufacturer’s instructions) and eluted in 25 μL RNAse-free water. Next, RNA was produced by in vitro transcription using T7 HiScribe reagents (New England BioLabs). Following a 4 h reaction at 37 °C, the mixture was treated with 4U TURBO DNAse (Thermo Fisher Scientific) and incubated for another 15 min at 37 °C. The RNA product was then purified using SPRI beads and eluted in 60 μL RNAse-free water. DNA:RNA hybrid was then synthesized by reverse transcription using Maxima H RT reagents (Thermo Fisher Scientific). Finally, ssDNA was made by hydrolyzing the RNA strand through the addition of 24 μL NaOH solution (0.5 M NaOH + 0.25 M EDTA, in water) and incubation at 95 °C for 10 min. The final ssDNA product was purified using SPRI beads at a 1:1.2 DNA:resin volume ratio and eluted in 15 μL water.

Data availability

The data that support the findings of this study are available from the corresponding author upon reasonable request. All relevant DNA sequences are listed in the Supplementary Information.


  1. Kaddoum, L., Magdeleine, E., Waldo, G. S., Joly, E. & Cabantous, S. One-step split GFP staining for sensitive protein detection and localization in mammalian cells. Biotechniques 49, 727–736 (2010).

    CAS  Article  PubMed  Google Scholar 

  2. Van Engelenburg, S. B. & Palmer, A. E. Imaging type-III secretion reveals dynamics and spatial segregation of Salmonella effectors. Nat. Methods 7, 325–330 (2010).

    Article  PubMed  Google Scholar 

  3. Kamiyama, D. et al. Versatile protein tagging in cells with split fluorescent protein. Nat. Commun. 7, 11046 (2016).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  4. Chun, W., Waldo, G. S. & Johnson, G. V. Split GFP complementation assay: a novel approach to quantitatively measure aggregation of tau in situ: effects of GSK3beta activation and caspase 3 cleavage. J. Neurochem. 103, 2529–2539 (2007).

    CAS  Article  PubMed  Google Scholar 

  5. Schmidt, S. et al. Detecting cytosolic peptide delivery with the GFP complementation assay in the low micromolar range. Angew. Chem. Int. Ed. Engl. 54, 15105–15108 (2015).

    CAS  Article  PubMed  Google Scholar 

  6. Milech, N. et al. GFP-complementation assay to detect functional CPP and protein delivery into living cells. Sci. Rep. 5, 18329 (2015).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  7. Feinberg, E. H. et al. GFP reconstitution across synaptic partners (GRASP) defines cell contacts and synapses in living nervous systems. Neuron 57, 353–363 (2008).

    CAS  Article  PubMed  Google Scholar 

  8. Macpherson, L. J. et al. Dynamic labelling of neural connections in multiple colours by trans-synaptic fluorescence complementation. Nat. Commun. 6, 10024 (2015).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  9. To, T. L. et al. Rationally designed fluorogenic protease reporter visualizes spatiotemporal dynamics of apoptosis in vivo. Proc. Natl Acad. Sci. USA 112, 3338–3343 (2015).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  10. Kim, Y. E., Kim, Y. N., Kim, J. A., Kim, H. M. & Jung, Y. Green fluorescent protein nanopolygons as monodisperse supramolecular assemblies of functional proteins with defined valency. Nat. Commun. 6, 7134 (2015).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  11. Leonetti, M. D., Sekine, S., Kamiyama, D., Weissman, J. S. & Huang, B. A scalable strategy for high-throughput GFP tagging of endogenous human proteins. Proc. Natl Acad. Sci. USA 113, E3501–3508 (2016).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  12. Cabantous, S., Terwilliger, T. C. & Waldo, G. S. Protein tagging and detection with engineered self-assembling fragments of green fluorescent protein. Nat. Biotechnol. 23, 102–107 (2005).

    CAS  Article  PubMed  Google Scholar 

  13. Nguyen, H. B., Hung, L. W., Yeates, T. O., Terwilliger, T. C. & Waldo, G. S. Split green fluorescent protein as a modular binding partner for protein crystallization. Acta Crystallogr. D. Biol. Crystallogr. 69, 2513–2523 (2013).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  14. Cranfill, P. J. et al. Quantitative assessment of fluorescent proteins. Nat. Methods 13, 557–562 (2016).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  15. Shaner, N. C. et al. A bright monomeric green fluorescent protein derived from Branchiostoma lanceolatum. Nat. Methods 10, 407–409 (2013).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  16. Shemiakina, I. I. et al. A monomeric red fluorescent protein with low cytotoxicity. Nat. Commun. 3, 1204 (2012).

    CAS  Article  PubMed  Google Scholar 

  17. Yu, D. et al. A naturally monomeric infrared fluorescent protein for protein labeling in vivo. Nat. Methods 12, 763–765 (2015).

    Article  PubMed  PubMed Central  Google Scholar 

  18. Costantini, L. M. et al. A palette of fluorescent proteins optimized for diverse cellular environments. Nat. Commun. 6, 7670 (2015).

    Article  PubMed  PubMed Central  Google Scholar 

  19. Huang, L., Pike, D., Sleat, D. E., Nanda, V. & Lobel, P. Potential pitfalls and solutions for use of fluorescent fusion proteins to study the lysosome. PLoS ONE 9, e88893 (2014).

    ADS  Article  PubMed  PubMed Central  Google Scholar 

  20. Lippincott-Schwartz, J. & Patterson, G. H. Photoactivatable fluorescent proteins for diffraction-limited and super-resolution imaging. Trends Cell Biol. 19, 555–565 (2009).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  21. Huang, B., Babcock, H. & Zhuang, X. Breaking the diffraction barrier: super-resolution imaging of cells. Cell 143, 1047–1058 (2010).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  22. Subach, F. V. et al. Photoactivatable mCherry for high-resolution two-color fluorescence microscopy. Nat. Methods 6, 153–159 (2009).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  23. Brodsky, F. M. Diversity of clathrin function: new tricks for an old protein. Annu. Rev. Cell Dev. Biol. 28, 309–336 (2012).

    MathSciNet  CAS  Article  PubMed  Google Scholar 

  24. English, A. R., Zurek, N. & Voeltz, G. K. Peripheral ER structure and function. Curr. Opin. Cell Biol. 21, 596–602 (2009).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  25. Greenfield, J. J. & High, S. The Sec61 complex is located in both the ER and the ER-Golgi intermediate compartment. J. Cell Sci. 112, 1477–1486 (1999).

    CAS  PubMed  Google Scholar 

  26. Friedman, J. R., Webster, B. M., Mastronarde, D. N., Verhey, K. J. & Voeltz, G. K. ER sliding dynamics and ER-mitochondrial contacts occur on acetylated microtubules. J. Cell Biol. 190, 363–375 (2010).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  27. Nixon-Abell, J. et al. Increased spatiotemporal resolution reveals highly dynamic dense tubular matrices in the peripheral ER. Science 354, aaf3928 (2016).

    Article  PubMed  Google Scholar 

  28. Goedhart, J. et al. Structure-guided evolution of cyan fluorescent proteins towards a quantum yield of 93%. Nat. Commun. 3, 751 (2012).

    Article  PubMed  PubMed Central  Google Scholar 

  29. Subach, O. M., Cranfill, P. J., Davidson, M. W. & Verkhusha, V. V. An enhanced monomeric blue fluorescent protein with the high chemical stability of the chromophore. PLoS ONE 6, e28674 (2011).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  30. Wang, S., Moffitt, J. R., Dempsey, G. T., Xie, X. S. & Zhuang, X. Characterization and development of photoactivatable fluorescent proteins for single-molecule-based superresolution imaging. Proc. Natl Acad. Sci. USA 111, 8452–8457 (2014).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  31. Subach, F. V., Patterson, G. H., Renz, M., Lippincott-Schwartz, J. & Verkhusha, V. V. Bright monomeric photoactivatable red fluorescent protein for two-color super-resolution sptPALM of live cells. J. Am. Chem. Soc. 132, 6481–6491 (2010).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  32. Shen, Y., Rosendale, M., Campbell, R. E. & Perrais, D. pHuji, a pH-sensitive red fluorescent protein for imaging of exo- and endocytosis. J. Cell Biol. 207, 419–432 (2014).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  33. Hu, C. D., Chinenov, Y. & Kerppola, T. K. Visualization of interactions among bZIP and Rel family proteins in living cells using bimolecular fluorescence complementation. Mol. Cell 9, 789–798 (2002).

    CAS  Article  PubMed  Google Scholar 

  34. Shaner, N. C. et al. Improving the photostability of bright monomeric orange and red fluorescent proteins. Nat. Methods 5, 545–551 (2008).

    CAS  Article  PubMed  PubMed Central  Google Scholar 

  35. Bajar, B. T. et al. Improving brightness and photostability of green and red fluorescent proteins for live cell imaging and FRET reporting. Sci. Rep. 6, 20889 (2016).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  36. Bindels, D. S. et al. mScarlet: a bright monomeric red fluorescent protein for cellular imaging. Nat. Methods 14, 53–56 (2017).

    CAS  Article  PubMed  Google Scholar 

  37. Yamamoto, Y., Yoshida, A., Miyazaki, N., Iwasaki, K. & Sakisaka, T. Arl6IP1 has the ability to shape the mammalian ER membrane in a reticulon-like fashion. Biochem. J. 458, 69–79 (2014).

    CAS  Article  PubMed  Google Scholar 

  38. Yu, D. et al. An improved monomeric infrared fluorescent protein for neuronal and tumour brain imaging. Nat. Commun. 5, 3626 (2014).

    CAS  PubMed  PubMed Central  Google Scholar 

  39. Schindelin, J. et al. Fiji: an open-source platform for biological-image analysis. Nat. Methods 9, 676–682 (2012).

    CAS  Article  PubMed  Google Scholar 

  40. Huang, B., Wang, W., Bates, M. & Zhuang, X. Three-dimensional super-resolution imaging by stochastic optical reconstruction microscopy. Science 319, 810–813 (2008).

    ADS  CAS  Article  PubMed  PubMed Central  Google Scholar 

  41. Jinek, M. et al. A programmable dual-RNA-guided DNA endonuclease in adaptive bacterial immunity. Science 337, 816–821 (2012).

    ADS  CAS  Article  PubMed  Google Scholar 

  42. Lin, S., Staahl, B. T., Alla, R. K. & Doudna, J. A. Enhanced homology-directed human genome engineering by controlled timing of CRISPR/Cas9 delivery. Elife 3, e04766 (2014).

    PubMed  PubMed Central  Google Scholar 

Download references


We thank Daichi Kamiyama and David A. Brown in the Bo Huang laboratory (UCSF) for advice on molecular cloning and other extensive discussion, Dan Yu in the Xiaokun Shu laboratory (UCSF) for advice on mutagenesis and E. coli library screening, and Joseph DeRisi (UCSF) for generously sharing the nucleofector device with us. This work is supported by the National Institutes of Health Director’s New Innovator Award DP2OD008479 (to B.H.) and R21EB022798 (to B.H., S.F., and V.P.), and by the W. M. Keck Foundation Medical Research Grant (to B.H. and S.S.). V.P. is supported by a predoctoral fellowship from the American Heart Association. B.H. is a Chan Zuckerberg Biohub Investigator.

Author information

Authors and Affiliations



S.F. and B.H. conceived and designed the research; S.F. performed the screening and protein labeling experiments; S.F., H.L., and M.L. performed the mNG211 knock-in and imaging experiment; S.F. and S.S. performed the dual-color knock-in and imaging experiments; S.F. and V.P. performed the STORM experiments and analysis; S.F. analyzed the data; S.F. and B.H. wrote the manuscript.

Corresponding author

Correspondence to Bo Huang.

Ethics declarations

Competing interests

The authors declare no competing financial interests.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Feng, S., Sekine, S., Pessino, V. et al. Improved split fluorescent proteins for endogenous protein labeling. Nat Commun 8, 370 (2017).

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI:

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing