Abstract
Lorentz symmetry is a foundational property of modern physics, underlying the standard model of particles and general relativity. It is anticipated that these two theories are lowenergy approximations of a single theory that is unified and consistent at the Planck scale. Many unifying proposals allow Lorentz symmetry to be broken, with observable effects appearing at Plancksuppressed levels; thus, precision tests of Lorentz invariance are needed to assess and guide theoretical efforts. Here we use ultrastable oscillator frequency sources to perform a modern Michelson–Morley experiment and make the most precise direct terrestrial test to date of Lorentz symmetry for the photon, constraining Lorentz violating orientationdependent relative frequency changes Δν/ν to 9.2±10.7 × 10^{−19} (95% confidence interval). This order of magnitude improvement over previous Michelson–Morley experiments allows us to set comprehensive simultaneous bounds on nine boost and rotation anisotropies of the speed of light, finding no significant violations of Lorentz symmetry.
Introduction
A significant consequence of Lorentz symmetry is the isotropic nature of the speed of light, which remains invariant under rotation and boost transformations. Measuring the isotropy of the speed of light has played an important role in physics, starting with the seminal Michelson and Morley interferometer experiment in the late nineteenth century^{1}. What began as a hunt for a luminiferous ether soon evolved into tests of the revolutionary theory of special relativity. Current motivation arises from the search for hints of new physics^{2,3,4}, to provide direction in the quest for a unified theory of quantum mechanics and general relativity^{5}.
Despite the success of unifying the weak force and electrodynamics^{6}, unification of the standard model with gravity remains elusive. Many approaches invoking string theory^{7}, quantum gravity^{8,9,10} and noncommutative field theories^{11} either explicitly require or naturally permit Lorentz symmetry to be broken^{5}. Efforts to test these theories experimentally focus on searches for violations of Lorentz and charge–parity–time (CPT) symmetry, which are expected to occur at the Planck scale (5.4 × 10^{−44} s, 1.6 × 10^{−35} m and 1.2 × 10^{19} GeV), with suppressed effects manifesting in regimes experimentally accessible via precision measurement^{12}. Many tests of Lorentz and CPT symmetry have been performed for a variety of fields, particles and forces, with no violations reported to date^{13}.
Just as the theories motivating Michelson–Morley style experiments have changed, so too has the technology used. The transition from conventional optical interferometer searches to resonatorstabilized frequency source tests^{14,15,16,17,18,19} has enabled a rapid increase in experimental sensitivity; an overview is provided in Fig. 1. The exceptional frequency stability performance of these modern sources makes tests of Lorentz symmetry of the photon one of the most powerful experimental tools in the search for clues towards unification frameworks such as quantum gravity.
Here we present the results of the most sensitive Michelson–Morley style frequency comparison experiment performed to date. We use 1 year of data to set new bounds on the nine possible rotational and boost isotropies of the speed of light, with our results expressed as constraints on coefficients of the standard model extension (SME)^{20}. We find no evidence of any statistically significant violation of Lorentz symmetry of the photon.
Results
Experiment design
A schematic of our Michelson–Morley oscillator experiment, located in Berlin (latitude 52.4°), is presented in Fig. 2. Two cylindrical copper cavities were each loaded with a nominally identical cylindrical sapphire dielectric crystal. Whispering gallery modes were excited within the crystals with a resonance frequency of 12.97 GHz. Pound control electronics are used to build two loop oscillator circuits, with each oscillator locked to the resonance frequency of a cavity^{21}. The cavity crystal axes were aligned perpendicular to each other such that the Poynting vectors and thus path of light propagation for the resonant modes were orthogonal to each other (see insert of Fig. 2). A fractional change in the speed of light would induce a proportional fractional change in the beat note frequency of the two oscillators. Thus, to be highly sensitive to the signals of Lorentz invariance violation (LIV) one needs to employ extremely lownoise frequency sources. Of course, systematic noise sources also lead to frequency changes; thus, we require both lownoise sources and a wellcontrolled setup. At cryogenic temperatures, the frequency stability of the loop oscillator circuit was optimized, which ultimately dictated the sensitivity of the experiment (see Fig. 3).
We analysed the experiment relative to a suncentred inertial reference frame^{22}. As such, passive rotation transformations were provided courtesy of Earth’s daily and annual cycles. In addition, the apparatus was actively rotated in the laboratory on a tiltstabilized highprecision airbearing turntable that was run with a period of 100 s. This corresponds to the optimal performance of the experiment, which is a tradeoff between oscillator frequency stability, rate of data acquisition and the influence of systematic noise. A 200 l liquid helium reservoir allowed for 3 weeks of continuous operation before refilling was required.
Owing to the symmetry of the setup with respect to the suncentered inertial reference frame, the signal of interest occurs at twice the turntable rotation frequency, 2ω_{R}, with additional sideband modulations arising from Earth’s sidereal rotation, ω_{⊕}, and orbit, Ω_{⊕}. This has the added benefit of suppressing the influence of any rotationinduced sources of systematic noise that manifest at the fundamental turntable rotation frequency (see Fig. 3). The experimental setup is firstorder sensitive to LIVs of rotational transformations, with a suppressed sensitivity to symmetry breaking of boost transformations. The suppression is of order 10^{−4}, which is the ratio of Earth’s orbital velocity to the speed of light.
Analysis
Data were collected over the course of a year; the beat frequency between the oscillators for the duration of the experiment is displayed in Fig. 3. The beat frequency data were analysed for periodic signals of variation corresponding to modulation frequencies of interest. Leastsquares regression was used to perform a fit to the fundamental turntable rotation frequency and the first harmonic,
Errorweighted leastsquares regression was then used to fit the amplitudes C_{n} and S_{n} from equation (1) to the daily variations (ω_{⊕}, 2ω_{⊕}) and finally to the annual frequencies (Ω_{⊕}, 2Ω_{⊕}). A detailed description of the data analysis process can be found in previous work^{19,23,24} and in the Methods section.
Taking errorweighted averages of relevant amplitudes from equation (1) we found a 2ω_{R} amplitude of −98±6 nHz. This value of interest, 2ω_{R}, is only statistically significant, owing to the influence of systematic noise sources (see Fig. 3), the most dominant of which is the dependency of oscillator resonance frequency on external magnetic fields, arising from the presence of impurities in the sapphire crystal^{25} and ferritebased microwave components. The frequency variations induced by moving the oscillators through the quasistatic magnetic field of the Earth in the laboratory are indistinguishable from a Lorentz violating signal. However, the leakage into sidereal and annual sidebands is negligible.
Calculating the weighted average of quadrature amplitudes for daily and twice daily variations (ω_{⊕}, 2ω_{⊕}; see Supplementary Figs 1–8), we found a frequency variation of 12±14 nHz (95% confidence interval), leading to our reported bound on the overall sensitivity of the experiment, Δν/ν≤9.2±10.7 × 10^{−19} (95% confidence interval). The presence of a statistically significant LIV signal in any solitary amplitude would propagate through to the final value.
Discussion
We use our data to place limits on coefficients of the SME^{20}, which is an effective field theory framework containing the standard model and general relativity along with any possible Lorentz and CPT symmetry violating coefficients that could arise from the various fields. It is important to note that the SME is a purely phenomenological framework, designed to enable comprehensive searches for Lorentz and CPT symmetry violations and facilitate cataloguing and comparisons between experiments. It is conventional to express results in a single inertial reference frame; in this case, the widely adopted suncentred celestial equatorial frame is used^{22}.
It is important to point out that technically, at a fundamental level, a change in the beat frequency of the experiment is proportional to not just a change in the speed of light (owing to Lorentz violation of the photon) but also to changes in the propagating medium, owing to Lorentz violation of the electron^{26,27,28}. What we are actually measuring and constraining is a difference or combination of these potential effects. Owing to the choice of coordinates, the proton sector remains Lorentz invariant and does not contribute to any changes in the propagating medium^{22}.
We restrict our attention to the photon sector of the minimal SME^{22}, which only contains operators of renormalizable dimension in flat spacetime. The resulting possible violations of Lorentz symmetry can be divided into polarizationdependent or independent effects; astrophysical constraints^{29} have limited polarizationdependent violations far beyond the reach of this work and are thus ignored. What remains are nine coefficients constraining different effects—rotation violations, described by the five coefficients of the 3 × 3 symmetric traceless matrix , boost violations, described by the three coefficients of the 3 × 3 antisymmetric matrix and an overall isotropic deviation of c, described by the scalar (ref. 24). Experimental sensitivities to these coefficients are provided in Supplementary Table 2.
For sapphire with the c axis parallel to the crystal axis, as is the case in this work, the sensitivity to Lorentz violation of electrons is reduced^{27,28}. The effect is such that the orientation coefficients, , and the isotropic deviation, , should be replaced with and , respectively. In presenting the results of this work, we adhere to established convention and assume that the electron sector remains Lorentz invariant, as it has been for all modern cavitybased Michelson–Morley experiments.
Bounds for coefficients of the minimal SME are presented in Table 1. It is important to note that is constrained solely by the amplitude of the cosine variation at twice the turntable frequency, 2ω_{R}, which is dominated by known systematic noise processes (magnetic field). Therefore, the presented bound is obtained by taking the statistical mean of the timedependent C_{2} amplitudes from equation (1), with the error given by the s.d. of the amplitudes. All coefficients are statistically insignificant; we report no evidence for violations of Lorentz symmetry in electrodynamics.
For the rotation symmetry breaking coefficients, , our bounds are comparable to recent results from a trapped ion experiment^{30} that put constraints on four sets of linear combinations of electron and photon coefficients. In contrast, our reported bounds on the five coefficients were set under the assumption that Lorentz invariance of the electron is conserved (that is, c^{jk}=0); ultimately, this works derives bounds from nine linear combinations of photon and electron coefficients (see Supplementary Table 2), which in principle offers better opportunities for disentangling coefficients. Compared with bounds derived from previous modern Michelson–Morley cavity tests^{18,19}, where it was also assumed that the electron remained Lorentz invariant, we improve by up to a factor of ∼4.
The trapped ion experiment^{30} was not sensitive to the isotropic deviation, , or the boost symmetry breaking coefficients, . For , we improve on the current stateoftheart^{13,18,19} by up to a factor of ∼5. We also improve on our existing bounds^{24} for the isotropic shift, , by a factor of ∼20, as recent work^{31} demonstrated that doublepass asymmetric resonators constructed out of a single material are only sensitive to higherorder coefficients (d>4) of the SME.
Despite thoughtful advances in the implementation and design of alternative experiments, cavitybased Michelson–Morley tests such as the one presented in this work still remain the most powerful and comprehensive way to search for nonbirefringent LIV effects in electrodynamics.
Scheduled upgrades to the experiment to improve the fundamental stability of the microwave oscillators^{32} will soon allow for even more sensitive tests. The installation of superior magnetic shielding around the oscillators will reduce the influence of systematic noise sources. The addition of a separate optical cavity system in the same cryogenic environment will also open up opportunities for exploring additional higherorder coefficients^{31,33} and matter sector coefficients^{34}, allowing a more complete disentangling of electron and photon sector coefficients.
A modern Michelson–Morley experiment has been performed with two orthogonally aligned stable microwave oscillators. Using data of the beat note frequency between the two oscillators recorded over the course of a year, we are able to constrain LIVinduced Δν/ν to be <10^{−18}, the most precise measurement ever made for electromagnetic cavity experiments. No violations of Lorentz symmetry were observed.
Methods
Experiment
Two nominally identical cylinders (51 mm diameter and 30 mm height) of HEMEX grade ultrapure sapphire (GT Advanced Technologies) were machined from the same boule. The crystals were cleaned in a solution of 70 % nitric acid containing several drops of hydrofluoric acid and then mounted in copper cavities and sealed in a stainless steel vacuum can, evacuated to sub10^{−6} mbar. Whispering gallery resonant mode WGE_{16,0,0} was used for both cavities. This mode features a dominant radial electric field with 32 variations around the circumference of the sapphire crystal. The majority of the electromagnetic fields are contained within the sapphire dielectric, with minimal evanescent field leaking out to the copper walls of the cavity structure. The first cavity had a resonant frequency of 12.9688 GHz and a loaded quality factor of 10^{9} at 4.4 K, while the second cavity had a resonant frequency of 12.9685 GHz and a loaded quality factor of 1.5 × 10^{9} at 4.4 K.
Small concentrations of impurities within the sapphire give rise to a temperature/frequency turning point^{21}; for the 347 kHz beat frequency between the two resonators, this turning point occurred at 5.5 K. A temperature controller (model 340, Lake Shore Cryotronics, Inc.) was used in conjunction with a resistive heater and a carbonglass temperature sensor to operate the resonators at the turning point. Custom microwave circuits and control electronics are used to create a loop oscillator out of each resonator. Pound locking is employed, whereby modulation sidebands reflected back from the resonator are demodulated with a lockin amplifier (model SR830, Standford Research Systems) and from this a correction signal is applied to a voltagecontrolled phase shifter to align the frequency of the oscillator with that of the resonator. Power incident on the cavity is monitored with a detector (model DT8016, Herotek, Inc.), the signal is compared against a userdefined setpoint and a correction voltage is applied to a voltagecontrolled attenuator placed in situ with the loop oscillator. The oscillator comparison beat frequency was logged on a frequency counter (model 53142A, Agilent Technologies, Inc.) referenced to a 10 MHz rubidium standard.
The oscillators were rotated on a highprecision airbearing rotation table (Kugler GmbH); an 18,000 point optical encoder was used to track the angular position of the table and maintain a constant rotation velocity. The table sat on three aluminium legs, with each one in turn placed on a force sensor; these were used to align the centre of mass with the axis of rotation. A biaxial highgain tilt sensor (model 755, Applied Geomechanics) sits at the centre of the experiment. Variations in tilt were compensated for by heating or cooling two of the three aluminium legs. All three legs were heated above ambient temperature to improve performance of the tiltcontrol system.
Data analysis
Original time tags are converted into time in seconds since the Vernal Equinox before the start of data collection (20 March 2012, 05:14 UTC+0). This format assists with calculating the relevant phase offsets required to analyse the data in the context of the SME^{22}. The rotation turntable features an optical encoder with 18,000 points and a trigger mark to indicate that a full rotation has occurred; the data are scanned and incomplete rotations are discarded. The rotation points are converted into a modular angle value in radians. The data are broken up into subsets containing ten full turntable rotations (corresponding to ∼1,000 s) and an ordinary leastsquares regression is used to fit the subset to the following model:
The value of ω_{R}t comes straight from the modular angular position of the turntable recorded in the data. The phase offset, φ_{R}, is the angular difference between the start of data collection and the alignment of the crystal axis of the top cavity with geographical East. The start of data collection is triggered at the same point for each experimental run. The phase offset is once again only needed to aid with the reporting of coefficients in the SME framework. The amplitudes of equation (2) and the mean time of each subset are stored to file, producing 19,597 entries. A histogram of the magnitude of errors for the fits to and is produced (Supplementary Fig. 9); all subsets with an error further than 3σ from the mean are discarded, resulting in 299 entries being removed (1.5% of the full data set). These points correspond to data with excessive additional noise present that does not fit our model or expected signals and would otherwise corrupt the quality of the subsequent analysis.
The demodulated data set is then broken up into subsets containing 100 entries each (∼1.2 days) and fit to the following model via a weighted leastsquares regression, using the square of the s.e. of the fits from equation (2) as the weights.
The phase offset φ_{⊕} is the difference between the 2012 Vernal Equinox and the alignment of geographical East with the Y axis of the Sun Centred frame used for determination of the SME coefficients^{22}. The value of ω_{⊕} used was 7.3 × 10^{−5} rad s^{−1} and t is the relevant mean time calculated during the previous demodulation (equation (2)). Once again the amplitudes, s.e. and mean time for each subset is stored to file. The fitted amplitudes and s.e. from equations (3) and (4) are shown in Supplementary Figs 1–8. The eight amplitudes from equations (3) and (4) representing the first two harmonics of daily variations are used to bound the overall sensitivity of the experiment to LIVs. We take the s.e.weighted average of all the amplitudes, which is equivalent to weighting by the variance. Noting the distribution of the histogram of all the amplitudes (Supplementary Fig. 10), whereby 95% of the points lie within 2 s.d. of the mean, we multiply the associated s.e. by 2, to determine the 95% confidence interval for our bound, Δν/ν≤9.2±10.7 × 10^{−19}.
The final stage of the data analysis is used to set bounds on coefficients of the SME. Each amplitude and s.e. from equations (3) and (4) is used to perform a weighted leastsquares regression fit to an offset and variations at harmonics of Earth’s orbital frequency Ω_{⊕} and 2Ω_{⊕}. Supplementary Table 2 summarizes the relevant amplitudes, their sensitivity to different coefficients of the SME and the corresponding numerical weights.
For SME coefficients where more than one bound is derived from Supplementary Table 2, we report the errorweighted average of all contributions. The coefficient is only accessible via the second harmonic of turntable rotation (amplitude in equation (2), or offset C_{0} in equation (3)), where systematic noise sources are present. The bound for this coefficient is set by taking the statistical mean and s.d. of all the values obtained for C_{0}, noting that the bound should be consistent with a null result for systematic noise with a random phase, while a substantial Lorentz violating signal with constant phase would be statistically significant.
Additional information
How to cite this article: Nagel, M. et al. Direct terrestrial test of Lorentz symmetry in electrodynamics to 10^{−18}. Nat. Commun. 6:8174 doi: 10.1038/ncomms9174 (2015).
References
 1
Michelson, A. A. & Morley, E. W. On the relative motion of the earth and the luminiferous ether. Am. J. Sci. 34, 333–345 (1887).
 2
Bluhm, R. in Special Relativity eds Ehlers J., Lämmerzahl C. 702, of Lecture Notes in Physics 191–226Springer: Berlin, (2006).
 3
Liberati, S. & Mattingly, D. in Proceedings of the 2009 SIGRAV Graduate School in Contemporary Relativity and Gravitionational Physics Villa Olmo, Como, Italy (2009).
 4
Tasson, J. D. What do we know about lorentz invariance? Rep Prog Phys 77, 062901 (2014).
 5
Weinberg, S. in Proceedings of the sixth International Workshop on Chiral Dynamics, no. UTTG0909, Proceedings of Science 1–15University of Bern, Bern, Switzerland (2009).
 6
Weinberg, S. A model of leptons. Phys. Rev. Lett. 19, 1264–1266 (1967).
 7
Kostelecký, V. A. & Samuel, S. Spontaneous breaking of lorentz symmetry in string theory. Phys. Rev. D 39, 683–685 (1989).
 8
Myers, R. C. & Pospelov, M. Ultraviolet modifications of dispersion relations in effective field theory. Phys. Rev. Lett. 90, 211601 (2003).
 9
Hořava, P. Quantum gravity at a lifshitz point. Phys. Rev. D 79, 084008 (2009).
 10
Sotiriou, T. P., Visser, M. & Weinfurtner, S. Phenomenologically viable lorentzviolating quantum gravity. Phys. Rev. Lett. 102, 251601 (2009).
 11
Carroll, S. M., Harvey, J. A., Kostelecký, V. A., Lane, C. D. & Okamoto, T. Noncommutative field theory and lorentz violation. Phys. Rev. Lett. 87, 141601 (2001).
 12
Kostelecký, V. A. & Potting, R. CPT, strings, and meson factories. Phys. Rev. D 51, 3923–3935 (1995).
 13
Kostelecký, V. A. & Russell, N. Data tables for lorentz and cpt violation. Rev. Mod. Phys. 83, 11–31 (2011).
 14
Essen, L. A new aetherdrift experiment. Nature 17, 793–794 (1955).
 15
Brillet, A. & Hall, J. L. Improved laser test of the isotropy of space. Phys. Rev. Lett. 42, 549–552 (1979).
 16
Lipa, J. A., Nissen, J. A., Wang, S., Stricker, D. A. & Avaloff, D. New limit on signals of lorentz violation in electrodynamics. Phys. Rev. Lett. 90, 060403 (2003).
 17
Stanwix, P. L. et al. Test of lorentz invariance in electrodynamics using rotating cryogenic sapphire microwave oscillators. Phys. Rev. Lett. 95, 040404 (2005).
 18
Eisele, C., Nevsky, A. Y. & Schiller, S. Laboratory test of the isotropy of light propagation at the 10^{−17} level. Phys. Rev. Lett. 103, 090401 (2009).
 19
Herrmann, S. et al. Rotating optical cavity experiment testing lorentz invariance at the 10^{−17} level. Phys. Rev. D 80, 105011 (2009).
 20
Colladay, D. & Kostelecký, V. A. Lorentzviolating extension of the standard model. Phys. Rev. D 58, 116002 (1998).
 21
Locke, C. R., Ivanov, E. N., Hartnett, J. G., Stanwix, P. L. & Tobar, M. E. Invited article: design techniques and noise properties of ultrastable cryogenically cooled sapphiredielectric resonator oscillators. Rev. Sci. Instrum. 79, 051301 (2008).
 22
Kostelecký, V. A. & Mewes, M. Signals for lorentz violation in electrodynamics. Phys. Rev. D 66, 056005 (2002).
 23
Stanwix, P. L., Tobar, M. E., Wolf, P., Locke, C. R. & Ivanov, E. N. Improved test of lorentz invariance in electrodynamics using rotating cryogenic sapphire oscillators. Phys. Rev. D 74, 081101 (2006).
 24
Hohensee, M. A. et al. Improved constraints on isotropic shift and anisotropies of the speed of light using rotating cryogenic sapphire oscillators. Phys. Rev. D 82, 076001 (2010).
 25
Benmessai, K. et al. Hybrid electron spin resonance and whispering gallery mode resonance spectroscopy of fe3+ in sapphire. Phys. Rev. B 87, 094412 (2013).
 26
Müller, H., Herrmann, S., Saenz, A., Peters, A. & Lämmerzahl, C. Optical cavity tests of lorentz invariance for the electron. Phys. Rev. D 68, 116006 (2003).
 27
Müller, H., Braxmaier, C., Herrmann, S., Peters, A. & Lämmerzahl, C. Electromagnetic cavities and lorentz invariance violation. Phys. Rev. D 67, 056006 (2003).
 28
Müller, H. Testing lorentz invariance by the use of vacuum and matter filled cavity resonators. Phys. Rev. D 71, 045004 (2005).
 29
Kostelecký, V. A. & Mewes, M. Sensitive polarimetric search for relativity violations in gammaray bursts. Phys. Rev. Lett. 97, 140401 (2006).
 30
Pruttivarasin, T. et al. MichelsonMorley analogue for electrons using trapped ions to test Lorentz symmetry. Nature 517, 592–595 (2015).
 31
Mewes, M. Opticalcavity tests of higherorder lorentz violation. Phys. Rev. D 85, 116012 (2012).
 32
Nand, N. R. et al. Resonator power to frequency conversion in a cryogenic sapphire oscillator. Appl Phys Lett 103, 043502 (2013).
 33
Parker, S. R., Mewes, M., Stanwix, P. L. & Tobar, M. E. Cavity bounds on higherorder lorentzviolating coefficients. Phys. Rev. Lett. 106, 180401 (2011).
 34
Müller, H. et al. Tests of relativity by complementary rotating michelsonmorley experiments. Phys. Rev. Lett. 99, 050401 (2007).
Acknowledgements
This work was supported by Australian Research Council Discovery Project DP130100205 and by the Go8DAAD AustraliaGermany Joint Research Cooperation Scheme.
Author information
Affiliations
Contributions
M.T. and A.P. conceived and instigated the experiment. S.P., P.S., M.N., J.H. and E.I. built the cryogenic oscillators and relevant control systems. M.N., E.K., S.P. and P.S. commissioned and optimized the experimental setup. M.N. and E.K. collected data and operated the experiment. S.P., M.N., E.K., A.P. and M.T. analysed the data. S.P. and M.N. wrote the manuscript and Supplementary Materials. All authors contributed to interpretations and discussions of results, and to the content of the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures 110, Supplementary Tables 12 and Supplementary References (PDF 644 kb)
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Nagel, M., Parker, S., Kovalchuk, E. et al. Direct terrestrial test of Lorentz symmetry in electrodynamics to 10^{−18}. Nat Commun 6, 8174 (2015). https://doi.org/10.1038/ncomms9174
Received:
Accepted:
Published:
Further reading

Lorentz invariance violations in the interplay of quantum gravity with matter
Physical Review D (2020)

A simplified cryogenic optical resonator apparatus providing ultralow frequency drift
Review of Scientific Instruments (2020)

Limit on the anisotropy of the oneway maximum attainable speed of the electron
Physical Review D (2020)

Spectral Purification of Microwave Signals with Disciplined Dissipative Kerr Solitons
Physical Review Letters (2019)

Velocitydependent deformations of the energy spectrum of a quantum cavity from Lorentz symmetry violations
Physical Review D (2019)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.