Abstract
Co-translational protein targeting is an essential, evolutionarily conserved pathway for delivering nascent proteins to the proper cellular membrane. In this pathway, the signal recognition particle (SRP) first recognizes the N-terminal signal sequence of nascent proteins and subsequently interacts with the SRP receptor. For this, signal sequence binding in the SRP54 M domain must be effectively communicated to the SRP54 NG domain that interacts with the receptor. Here we present the 2.9 Å crystal structure of unbound- and signal sequence bound SRP forms, both present in the asymmetric unit. The structures provide evidence for a coupled binding and folding mechanism in which signal sequence binding induces the concerted folding of the GM linker helix, the finger loop, and the C-terminal alpha helix αM6. This mechanism allows for a high degree of structural adaptability of the binding site and suggests how signal sequence binding in the M domain is coupled to repositioning of the NG domain.
Similar content being viewed by others
Introduction
The signal recognition particle (SRP) co-translationally targets proteins to the endoplasmic reticulum in eurkaryotes or to the plasma membrane in prokaryotes. As the initiating step, SRP binds to the N-terminal signal sequence of nascent secretory or membrane proteins as they emerge from the ribosome. The SRP–ribosome nascent chain complex (RNC) is then targeted to the membrane through a GTP-dependent interaction with the SRP receptor (SR). The signal sequence is released from SRP and inserted into the translocon channel. Finally, GTP hydrolysis triggers the dissociation of SRP from SR, and SRP can start another cycle of protein targeting (for review see ref 1, 2).
SRP composition varies in the three domains of life. However, the evolutionary conserved SRP core only comprises the SRP54 protein (termed Ffh in bacteria) bound to the coaxial stacked helices 5 and 8 of SRP RNA. It is this SRP core that carries out the key functions of signal sequence recognition and SR interaction.
SRP54 comprises an N-terminal NG domain and a C-terminal methionine-rich M domain. The NG domain contains the GTPase activity and interacts with SR3,4. The M domain anchors SRP54 onto the SRP RNA and contains the signal sequence binding site5,6,7,8. The NG and M domains are connected by a long and flexible GM linker that allows for rearrangements of the relative positions of the M and NG domains6,9,10,11,12,13,14. Biochemical studies show that the binding of a signal sequence to the M domain accelerates GTP-independent interaction between the NG domain and SR at the helix 8 tetraloop15,16. This ‘early’ complex undergoes a GTP-dependent structural change that results in a ‘closed’ and stable complex. Large-scale rearrangement of the closed complex to helix 5 leads to GTPase activation and signal sequence release11,16,17,18. The essential SRP RNA functions as a scaffold to mediate the rearrangements; it is also required for efficient GTPase activation11,17.
SRP-dependent N-terminal signal sequences are highly diverse in amino-acid composition and length, but they all contain a core of at least eight consecutive hydrophobic amino acids that acts as the major determinant for recognition by SRP19,20. In addition, the N-terminus of a signal sequence typically contains positively charged residues with an as yet unknown function.
Two crystal structures of archaeal SRP54-signal sequence fusion proteins have provided the first detailed views of the M domain-signal sequence interaction. The M domain contains five amphipathic α-helices (αM1-5) and includes a ‘finger loop’ between αM1 and αM2 (ref. 7). Different orientations of the signal sequence are seen in the crystal structures. In Sulfolobus solfataricus SRP54 complexed with the signal sequence of yeast dipeptidyl aminopeptidase B (DPAP-B)5, the signal sequence binds into a groove formed by αM1, αM2 and αM5; it is positioned roughly antiparallel to αM5. For the complex of Methanococcus jannaschii SRP54 and a signal sequence mimic6, the signal sequence is positioned perpendicular to αM5. There it is bound in a shallow groove formed by the αM1, αM5 and GM linker helix (Supplementary Fig. 1). A major drawback of both crystallographic models is that the SRP54 M domain is complexed with a signal sequence from a different SRP54 protein in the asymmetric unit. This results in a non-physiological SRP54 dimerization, both in solution and in the crystals5,6.
Communication between the M and NG domains is critical for SRP function. During protein targeting, the binding of a signal sequence in the M domain must be effectively transmitted to the NG domain to accelerate its interaction with SR. The molecular mechanism by which the signal sequence stimulates NG domain–SR complex assembly is currently not understood. To address this, we performed structural studies on M. jannaschii SRP and its interaction with signal sequences. Here we report the crystal structure of a monomeric SRP, including the full-length (fl) M domain in complex with a signal sequence. This structure shows how signal sequence binding in the M domain is directly linked to NG domain repositioning via an induced helix formation of the GM linker.
Results
The full-length SRP54-signal sequence fusion is monomeric
The amino-acid sequence C-terminal to αM5 in the M domain varies between species in length and composition, but is found in all SRP54 proteins21. On the basis of cross-linking22 and cryoelectron microscopy studies14, the C-terminal residues are suggested to play a role in signal sequence binding. These residues, which are deleted in most SRP54 constructs used for crystallization, are flexible in the crystal structure of the free Pyrococcus furiosus SRP54 (ref. 23). The SRP54 proteins in the crystal structures of the SRP54-signal sequence fusions (SRP54-ss)5,6 also lack the residues located C-terminal to the αM5. We hypothesized that the reported dimerization of SRP54-ss5,6 is caused by the absence of the C-terminal aliphatic sequence. To verify this, we cloned and expressed the full-length (fl) SRP54 protein from M. jannaschii (aa1-451) fused to a strongly hydrophobic, idealized signal sequence comprising 14 leucine and alanine residues6,24 (Fig. 1a). The SRP54 C-terminus and the signal sequence were separated in the protein construct by a 9-aa long glycine/serine linker to allow the signal sequence to properly bind to the M domain. The fl-SRP54-ss protein was identical to the previously reported SRP54-ss protein6 except for the inclusion of the 20 C-terminal amino acids of M. jannaschii SRP54. Size-exclusion chromatography demonstrated that fl-SRP54-ss, but not SRP54-ss6, was monomeric in solution (Supplementary Fig. 2).
The presence of a signal sequence accelerates SRP–SR interaction and consequently produces an apparent stimulatory effect on the GTPase reaction of the SRP–SR complex6,16,24,25,26. To test functionality of fl-SRP54-ss we reconstituted M. jannaschii SRP core complexes comprising SRP54, SRP19 and SRP RNA. As expected, we observed that SRP complexes containing fl-SRP54-ss stimulated GTP hydrolysis at a rate ∼20 times faster than SRP complexes containing SRP54-ss (Fig. 1b). Moreover, using surface plasmon resonance (Biacore) we found that the signal sequence stabilized the formation of the GTP-independent early NG domain–SR intermediate (Fig. 1c) as is also seen in the E. coli SRP16,24. Thus, the biochemical data demonstrated that the signal sequence fused to fl-SRP54 mimicked a functional signal sequence and that the key functions of SRP54 were unaffected by the linker region. As such, the fl-SRP54-ss provided a simple and relevant model system for structural analysis of signal sequence recognition.
The asymmetric unit contains two M domain conformations
Crystals of the M. jannaschii ternary complex of fl-SRP54-ss, SRP19 and SRP RNA only diffracted to low resolution. Previous structural studies of SRP54 had identified a hinge region (LGMGD aa294-298) positioned between the NG domain and GM linker, which allows for some degree of NG domain movements10,12. To improve crystal quality by reducing conformational heterogeneity, we cloned and expressed an identical fl-SRP54-ss construct but without the N-terminal NG domain. Size-exclusion chromatography confirmed that this GM linker-M domain-signal sequence fusion (aa303-475), referred to as SRP54M-ss hereafter, was monomeric in solution.
The optimized crystals of the complex between SRP54M-ss, SRP19 and a 96-nucleotide SRP RNA (G142–G237 of M. jannaschii SRP RNA) diffracted to 2.9 Å resolution. These crystals belonged to space group P22121 with two complexes in the asymmetric unit. The structure was solved by molecular replacement (Table 1). In the complex structure, SRP19 binds to the tetraloop regions of RNA helices 6 and 8, and the SRP54 M domain binds to the symmetric and asymmetric loops in helix 8, as previously reported6,9. The two complexes in the asymmetric unit, referred to here as complexes A and B, both show well-defined electron density for the RNA, SRP19 and for residues in αM1 to αM5—excluding the finger loop. These residues form the M domain core and contain the RNA binding motif. There are no significant differences for the RNA and SRP19 in complexes A and B. The structures of the M domain cores are also essentially the same. Indeed, this part of the M domain is rather rigid as evidenced by the relatively low B-factors. However, there is a striking difference in the electron density maps of complexes A and B for the GM linker, finger loop and C-terminal sequence (Supplementary Fig. 3). In complex A, these elements are highly flexible and could not be modelled, whereas in complex B they are ordered (Fig. 2). The conformation depends on whether the SRP complex has a signal sequence bound or not.
Unbound and signal sequence bound conformations of SRP
In what we refer to as complex A, the signal sequence is not bound. Concurrently, residues in the GM linker (M303-I318), finger loop (K346-H364) and C-terminal sequence (K431-G451) are structurally undefined (Fig. 2a). In this unbound form the M domain contains five helices (αM1–αM5), whose structures and spatial arrangement are identical to those in complex B and previous M. jannaschii SRP structures6,9. The surface of complex A has only a shallow and short hydrophobic groove composed mainly of nonpolar residues from αM1 (L328–M341) and the C-terminal part of αM5 (T419–K429).
In complex B, the signal sequence forms a 4-turn α-helical structure, deeply embedded into a groove formed by the GM linker, αM1, finger loop, αM5 and the C-terminal sequence (Fig. 2b). The GM linker adopts an α-helical structure (αGM, A306-M322) that is oriented with respect to the signal sequence helix with a crossing angle of ∼30° (Fig. 3). The αGM linker, together with the perpendicular oriented C-terminal part of αM5, compose the bottom of the groove. The αM1 and the finger loop (G342-L365) form one side of the groove. The opposite side is formed by the 20 C-terminal amino acids in the M domain (K431-G451). These residues form a 3-turn α-helical structure (αM6, P438-L446) that runs antiparallel to the signal sequence. Helices αM5 and αM6 are connected by a 90° bend at residue G430. Altogether, these five structural elements—αGM, αM1, finger loop, αM5 and αM6—create a hydrophobic groove about 20 Å deep and 25 Å long, exposing ∼1,500 Å2 of surface area (Fig. 4). The αM6 has almost no contact with αGM, and αGM on its part makes relatively few interactions with αM1. These weak inter-helical interactions suggest that the signal sequence-binding surface is rather flexible and allows for a high degree of structural plasticity: The side chains of the binding site residues have generally weaker electron density and higher B-factors than for the rest of the M domain.
Within the binding groove, nonpolar residues form a continuous hydrophobic surface. The hydrophobic character of the groove is conserved in M domains from archaea and bacteria, but the sequence identity is not (Supplementary Fig. 4). Conserved hydrophobic residues lining the groove include: T314, I318, I321 and M322 in αGM; I338 and M341 in αM1; M344, I347, L348, M350, I351 and L362 in the finger loop; T420, A423, I424 and L427 in αM5; and L439, I442 and M443 in αM6. Of these residues, 16 are involved in extensive hydrophobic interactions with the signal sequence. In fact, all of the 14 amino acids in the signal sequence make van der Waal contacts with the hydrophobic groove residues. In total, the binding groove buries 65% of the signal sequence surface area, which corresponds to 980 Å2. To this, 27% is contributed by the finger loop, 24% by αGM, 18% by αM1, 17% by αM6, and 14% by αM5.
The finger loop could not be traced in the previous structure of the M. jannaschii SRP54-ss dimer6, probably because of SRP54 dimerization. Here in our monomeric SRP54M-ss structure, the complete finger loop can be modelled into the electron density. The short helix αMF (P359-L365) in the C-terminal part of the finger loop is well ordered. The remaining 17 finger loop residues (G342-M358), between αM1 and αMF, adopt a traceable, but flexible, extended loop structure with two short helical turns. We conclude that this region does not adopt a rigid conformation upon signal sequence binding.
Whereas polar and charged residues are almost completely excluded from the binding groove, a striking negatively charged surface patch is located at the ‘exit’ of the hydrophobic groove in the N-terminus of αGM (Fig. 4). Here conserved acidic residues (E307, D311) are favourably located to interact with positively charged residues in the N-terminus of signal sequences via electrostatic interactions.
Discussion
In this study, we report the crystal structure of the complex of SRP RNA, SRP19, and a fl-SRP54 M domain-signal sequence fusion from M. jannaschii. The crystal contained two copies of the SRP complex in the asymmetric unit. Interestingly, the two M domains in the respective SRP complex adopted significantly different configurations, which represented the signal sequence unbound (complex A) and bound (complex B) forms of the M domain. This crystal packing is best explained by crystal packing interactions unique to complex A that selectively pack only unbound particles into the crystal lattice at this site. This provided us with a unique opportunity to directly compare the structures of unbound and signal sequence bound forms of the fl-SRP54 M domain.
In its unbound form (complex A), the M domain is structurally defined only by its core elements, that is, αM1-αM5, excluding the finger loop. The M domain core is rigid and unchanged from the ones present in complex B and in previously determined M. jannaschii SRP structures6,9. In addition to the finger loop, the GM linker and the C-terminal residues are also disordered, which confirmed that the signal sequence binding site is only partly preformed9. As seen in complex B, signal sequence binding triggered a concerted folding of the GM linker, the finger loop, and the C-terminus in such a way that they, together with αM1 and αM5, created a large U-shaped continuous hydrophobic surface that covers three sides of the bound signal sequence (Fig. 4). This induced-fit binding is biologically meaningful because the inherent flexibility of recognition elements, coupled with induced folding, can provide a high degree of structural adaptability. This should facilitate the specific recognition of highly diverse signal sequences. The plasticity of the signal sequence binding groove is further supported by relative few interactions between the recognition elements. Because SRP function is evolutionarily conserved, we expect that this recognition mechanism applies to SRP from other domains of life. In support, biochemical and structural data of ligand-free SRP54 from different species indicate that the GM linker, finger loop and C-terminus are flexible, or captured in variable conformations by crystal contacts7,8,10,23. In complex B, the structures of the GM linker, the finger loop and the αM6 are not supported by crystal contacts.
Only limited structural data are available for the SRP54 C-terminus and its role in signal sequence binding has not been elucidated. Here we show that the C-terminus in M. jannaschii assumes the shape of an α-helix (αM6) thereby shielding the signal sequence from solvent. M. jannaschii SRP54-ss, which is lacking the C-terminus, forms monomers and dimers in a roughly 1:1 ratio in solution6. Assembled into SRP complexes, the monomeric form does not accelerate SR interaction or stimulate GTP hydrolysis, showing that the C-terminus is required for SRP function (Supplementary Fig. 5a,b). However, the dimeric form shows strongly enhanced activity. Intriguingly, in the structure of the dimer6 the symmetry-related signal sequence helix is positioned similarly to the C-terminus in SRP54M-ss. This confines the signal sequence within the binding site and thus explains its rescued activity (Supplementary Fig. 5c).
Superimposition of the SRP54-ss and SRPM-ss structures shows a virtually identical orientation of the bound signal sequence relative to αGM and the M domain core. Moreover, the same contacts are made by the signal sequence with the hydrophobic residues in αGM and αM1. The importance of some of these residues for SRP function is confirmed by mutational analysis6. The signal sequence binding site observed in M. jannaschii, however, differs from those seen in the crystal structure of the S. solfataricus SRP54-ss5 and the cryoelectron microscopy structures of the E. coli SRP–RNC complex12,14. In these structures, the signal sequence is oriented roughly antiparallel to αM5 (Supplementary Fig. 1). Comparison of the M. jannaschii and S. solfataricus binding sites shows that some hydrophobic contacts are conserved, for example, I338 (L339 in S. solfataricus) in αM1, and T420 (M424) and I424 (L428) in αM5. The different binding sites could represent discrete binding modes that occur during the recognition event. This interpretation agrees well with recent data demonstrating that SRP binds to RNCs with exposed signal sequences in multiple interconverting conformations27. Docking of complex B onto the ribosome of the E. coli SRP–RNC complex12,14 shows a good fit without steric clashes (Supplementary Fig. 6).
Successive events during the SRP cycle require a rearrangement of the relative position of the NG and M domains11,12,14,17,18,28. Here we show that on signal sequence binding, the GM linker folds into an ordered α-helix (αGM). This αGM is an integral structural component of the complete binding site and makes intimate contact with the signal sequence (Fig. 3c). The αGM follows the path of the αGM helix in the dimer structure6. In the latter structure, the NG domain has rotated 180° with respect to its position in the free form, which brings the GTPase domain in proximity to the tip of helix 8 (refs 6, 9). We conclude that signal sequence-induced folding of αGM is the key event that directly links ligand binding to NG domain repositioning. We speculate that this folding event enforces an αGM orientation that predisposes the NG domain for interaction with SR to form the early NG domain–SR complex at helix 8 tetraloop (Fig. 1c and ref. 6). GTP hydrolysis and signal sequence release take place after the closed NG domain–SR complex has repositioned to helix 5 (refs 11, 17, 18). In the signal sequence release state, αGM is directed away from the M domain11. This αGM orientation is not compatible with signal sequence binding as seen in complex B. It is therefore conceivable that NG domain–SR repositioning to helix 5 promotes the disassembly of the binding groove and thus exposure of the signal sequence for signal sequence release.
The coupling of ligand binding and folding of the recognition region in the M domain (including the critical GM linker) provides a simple and efficient mechanism to communicate signal sequence recognition in the M domain to the NG domain. Moreover, we propose that signal sequence recognition via a disorder-to-order transition of multiple structural elements facilitates specific recognition of widely diverse signal sequences. Future structural studies with signal sequences of different composition and length will be necessary to gain a more comprehensive view of how promiscuous binding by SRP is achieved.
Methods
Protein and RNA production, complex assembly and crystallization
The srp19 gene from M. jannaschii was cloned into the pET-3a vector (Novagen) and expressed in JM109(DE3) cells (Promega). The SRP19 protein was purified by heat treatment followed by sequential column chromatography on Heparin Sepharose, Mono S, and Superdex 75 (GE Healthcare). The DNA sequence for M. jannaschii fl-SRP54, fl-SRP54-ss, SRP54-ss and SRP54M-ss was cloned into the pNZ8048 vector and expressed in Lactococcus lactis. The SRP54 proteins were purified by heat treatment followed by sequential column chromatography on Heparin Sepharose, Mono S and Superdex 200 (GE Healthcare). The M. jannaschii SRP RNA was transcribed in vitro using T7 RNA polymerase and purified by denaturing gel electrophoresis. Before complex formation, the RNA was annealed in water by denaturation at 75 °C followed by snap cooling on ice. The annealed RNA was purified on Mono Q (GE Healthcare) and dialyzed against 10 mM Tris-HCl (pH 7.5), 5 mM MgCl2. The protein–RNA complex was reconstituted in a buffer containing 10 mM Tris-HCl (pH 7.5), 250 mM KCl, 5 mM MgCl2, 1% (v/v) ß-mercaptoethanol. Binding reactions were incubated for 15 min at room temperature after addition of SRP19, and for 1 h at 37 °C after addition of SRP54. After this, the complex was purified on a Mono Q column and dialyzed against 10 mM Tris-HCl (pH 7.5), 250 mM KCl, 5 mM MgCl2. The complex (3 mg/ml) was crystallized by the hanging-drop vapor-diffusion technique at 18 °C. Crystals (0.15 × 0.15 × 0.05 mm3) grew in 7 days when the complex solution was mixed with an equal volume of mother liquor containing 35% 2-Methyl-2,4-pentanediol, 200 mM NaCl, 80 mM MgCl2, 100 mM sodium acetate (pH 5.0).
Data collection, phasing and refinement
Crystals were cryocooled directly from mother liquor and diffraction data were collected at the European Synchrotron Radiation Facility beamline ID23-1 using X-ray radiation with λ=0.984 Å at 100 K. Data were processed and scaled using XDS29 and SCALA from the CCP4 suite30. Statistics from data collections are listed in Table 1. Crystals of the M. jannaschii SRP54M-ss, SRP19 and SRP RNA complex belonged to space group P22121and contained two molecules in the asymmetric unit. The structure was solved by molecular replacement using the programme PHASER from the PHENIX suite31, and the SRP54-ss complex (pdb code 3NDB)6 as a search model. The electron density map was well defined in complex A and B for SRPRNA, SRP19 and the M domain core. In complex B the electron density also defined the structures of the signal sequence, GM linker, finger loop and αM6. A distinctive feature of the signal sequence, and the residues constituting its binding site, is the weak electron density for their side chains relative to those in the rest of the molecule. The structures were built and refined using the programs COOT32 and PHENIX REFINE. Structures were superimposed in COOT using SSM33. Refinement statistics of the structures are given in Table 1. The model has no outliers in the Ramachandran plot and the clashscore is 1. Representative electron density is shown in Supplementary Fig. 7 in stereo. The accessible surface area of the signal sequence binding groove was calculated using the CASTp server34. Figures 2 and 3c and Supplementary Information Supplementary Figs 1, 5c and 6 were prepared with PyMOL35; Figs 3a,b and 4 and Supplementary Information Supplementary Fig. 3 were prepared with CCP4mg36.
GTPase assay
One micromolar of M. jannaschii SRP RNA (nucleotides G123–C258, which include the helix 5 region required for GTPase activation11,17), 1.5 μM of SRP19 and 0.5 μM of SRP54 were assembled in binding buffer containing 10 mM Tris-Cl (pH 7.5), 150 mM KCl, 5 mM MgCl2, and 1% (v/v) ß-mercaptoethanol to form 0.5 μM of M. jannaschii SRP. M. jannaschii SR(aa93-408) was added to the SRP complex to final concentrations of 0, 1, 2, 5, 10 and 25 μM. GTP hydrolysis reactions, carried out at 25 °C, were started by adding 100 μM GTP with trace amounts of γ-32P-GTP (PerkinElmer). At different time points, 0.5 μl aliquots of the reactions were spotted on a polyethyleneimine–cellulose thin-layer chromatography (PEI-TLC) plate (Merck). Inorganic phosphate (Pi) and GTP were separated by chromatography in 0.75 M KH2PO4 and quantified with a Phosphorimager (Molecular Dynamics). Rates of GTP hydrolysis were averaged from three independent experiments and fitted to a single exponential model.
Surface plasmon resonance
Sensorgrams were recorded using a Biacore 3,000 instrument (GE Healthcare). An anti‐gluthathion‐S‐transferase (GST) monoclonal antibody was immobilized on a CM‐5 chip (GE Healthcare) by amine coupling according to the manufacturer’s instructions. Binding surfaces were subsequently generated by the application of equimolar amounts of GST-only as reference, or the N‐terminally GST‐tagged M. jannaschii SR(aa93‐408). Interaction experiments were performed in running buffer containing 10 mM Tris-Cl (pH 7.5), 150 mM KCl, 5 mM MgCl2 at 37 °C. Purified M. jannaschii SRP complexes in running buffer were injected at 0.5 and 1 μM concentrations in the absence of GTP and a flow rate of 5 μl min−1. Sensorgrams were corrected for non‐specific interaction with the GST‐only surface and by double referencing.
Additional information
Accession codes: Coordinates and structure factors have been deposited with the Protein Data Bank under the accession code 4XCO.
How to cite this article: Hainzl, T. et al. Signal sequence induced conformational changes in the signal recognition particle. Nat. Commun. 6:7163 doi: 10.1038/ncomms8163 (2015).
Accession codes
References
Saraogi, I. & Shan, S. O. Co-translational protein targeting to the bacterial membrane. Biochim. Biophys. Acta. 1843, 1433–1441 (2013).
Nyathi, Y., Wilkinson, B. M. & Pool, M. R. Co-translational targeting and translocation of proteins to the endoplasmic reticulum. Biochim. Biophys. Acta. 1833, 2392–2402 (2013).
Egea, P. F. et al. Substrate twinning activates the signal recognition particle and its receptor. Nature 427, 215–221 (2004).
Focia, P. J., Shepotinovskaya, I. V., Seidler, J. A. & Freymann, D. M. Heterodimeric GTPase core of the SRP targeting complex. Science 303, 373–377 (2004).
Janda, C. Y. et al. Recognition of a signal peptide by the signal recognition particle. Nature 465, 507–510 (2010).
Hainzl, T., Huang, S., Merilainen, G., Brannstrom, K. & Sauer-Eriksson, A. E. Structural basis of signal-sequence recognition by the signal recognition particle. Nat. Struct. Mol. Biol. 18, 389–391 (2011).
Keenan, R. J., Freymann, D. M., Walter, P. & Stroud, R. M. Crystal structure of the signal sequence binding subunit of the signal recognition particle. Cell 94, 181–191 (1998).
Batey, R. T., Rambo, R. P., Lucast, L., Rha, B. & Doudna, J. A. Crystal structure of the ribonucleoprotein core of the signal recognition particle. Science 287, 1232–1239 (2000).
Hainzl, T., Huang, S. & Sauer-Eriksson, A. E. Interaction of signal-recognition particle 54 GTPase domain and signal-recognition particle RNA in the free signal-recognition particle. Proc. Natl Acad. Sci. USA 104, 14911–14916 (2007).
Rosendal, K. R., Wild, K., Montoya, G. & Sinning, I. Crystal structure of the complete core of archaeal signal recognition particle and implications for interdomain communication. Proc. Natl Acad. Sci. USA 100, 14701–14706 (2003).
Ataide, S. F. et al. The crystal structure of the signal recognition particle in complex with its receptor. Science 331, 881–886 (2011).
Schaffitzel, C. et al. Structure of the E. coli signal recognition particle bound to a translating ribosome. Nature 444, 503–506 (2006).
Halic, M. et al. Structure of the signal recognition particle interacting with the elongation-arrested ribosome. Nature 427, 808–814 (2004).
Halic, M. et al. Following the signal sequence from ribosomal tunnel exit to signal recognition particle. Nature 444, 507–511 (2006).
Zhang, X., Kung, S. & Shan, S. O. Demonstration of a multistep mechanism for assembly of the SRP x SRP receptor complex: implications for the catalytic role of SRP RNA. J. Mol. Biol. 381, 581–593 (2008).
Zhang, X., Schaffitzel, C., Ban, N. & Shan, S. O. Multiple conformational switches in a GTPase complex control co-translational protein targeting. Proc. Natl Acad. Sci. USA 106, 1754–1759 (2009).
Voigts-Hoffmann, F. et al. The structural basis of FtsY recruitment and GTPase activation by SRP RNA. Mol. Cell. 52, 643–654 (2013).
Shen, K., Arslan, S., Akopian, D., Ha, T. & Shan, S. O. Activated GTPase movement on an RNA scaffold drives co-translational protein targeting. Nature 492, 271–275 (2012).
Martoglio, B. & Dobberstein, B. Signal sequences: more than just greasy peptides. Trends Cell Biol. 8, 410–415 (1998).
Hegde, R. S. & Bernstein, H. D. The surprising complexity of signal sequences. Trends Biochem. Sci. 31, 563–571 (2006).
Andersen, E. S. et al. The tmRDB and SRPDB resources. Nucleic Acids Res. 34, D163–D168 (2006).
Lutcke, H., High, S., Romisch, K., Ashford, A. J. & Dobberstein, B. The methionine-rich domain of the 54 Kda subunit of signal recognition particle is sufficient for the interaction with signal sequences. EMBO J 11, 1543–1551 (1992).
Egea, P. F., Napetschnig, J., Walter, P. & Stroud, R. M. Structures of SRP54 and SRP19, the two proteins that organize the ribonucleic core of the signal recognition particle from Pyrococcus furiosus. PLoS ONE 3, e3528 (2008).
Zhang, X., Rashid, R., Wang, K. & Shan, S. O. Sequential checkpoints govern substrate selection during cotranslational protein targeting. Science 328, 757–760 (2010).
Bradshaw, N., Neher, S. B., Booth, D. S. & Walter, P. Signal sequences activate the catalytic switch of SRP RNA. Science 323, 127–130 (2009).
Peluso, P. et al. Role of 4.5 S RNA in assembly of the bacterial signal recognition particle with its receptor. Science 288, 1640–1643 (2000).
Noriega, T. R. et al. Signal recognition particle-ribosome binding is sensitive to nascent-chain length. J. Biol. Chem. 289, 19294–19305 (2014).
Wang, C. Y. & Miller, T. F. 3rd Allosteric response and substrate sensitivity in peptide binding of the signal recognition particle. J. Biol. Chem. 289, 30868–30879 (2014).
Kabsch, W. Xds. Acta. Crystallogr. D Biol. Crystallogr. 66, 125–132 (2010).
Winn, M. D. et al. Overview of the CCP4 suite and current developments. Acta. Crystallogr. D Biol. Crystallogr. 67, 235–242 (2011).
Adams, P. D. et al. PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta. Crystallogr. D Biol. Crystallogr. 66, 213–221 (2010).
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta. Crystallogr. D Biol. Crystallogr. 66, 486–501 (2010).
Krissinel, E. & Henrick, K. Secondary-structure matching (SSM), a new tool for fast protein structure alignment in three dimensions. Acta. Crystallogr. D Biol. Crystallogr. 60, 2256–2268 (2004).
Dundas, J. et al. CASTp: computed atlas of surface topography of proteins with structural and topographical mapping of functionally annotated residues. Nucleic Acids Res. 34, W116–W118 (2006).
Moriscot, A. S. et al. MuRF1 is a muscle fiber-type II associated factor and together with MuRF2 regulates type-II fiber trophicity and maintenance. J. Struct. Biol. 170, 344–353 (2010).
McNicholas, S., Potterton, E., Wilson, K. S. & Noble, M. E. Presenting your structures: the CCP4mg molecular-graphics software. Acta. Crystallogr. D Biol. Crystallogr. 67, 386–394 (2011).
Acknowledgements
We thank the European Synchrotron Radiation Facility (Grenoble, France) and the MaxIV Laboratory (Lund, Sweden) for provision of synchrotron radiation facilities. This work was supported by the Swedish Research Council (A.E.S.-E.) and Kempe Foundation (A.E.S.-E.).
Author information
Authors and Affiliations
Contributions
T.H. and A.E.S.-E. designed the experiments, analysed the data and wrote the manuscript. T.H. performed all biochemical experiments, crystallized the complex and collected diffraction data. T.H. and A.E.S.-E. analysed the diffraction data, and solved and refined the structure.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures 1-7 (PDF 1118 kb)
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Hainzl, T., Sauer-Eriksson, A. Signal-sequence induced conformational changes in the signal recognition particle. Nat Commun 6, 7163 (2015). https://doi.org/10.1038/ncomms8163
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms8163
This article is cited by
-
The SRP signal sequence of KdpD
Scientific Reports (2019)
-
Cotranslational protein targeting to the membrane: Nascent-chain transfer in a quaternary complex formed at the translocon
Scientific Reports (2018)
-
“Multiple partial recognitions in dynamic equilibrium” in the binding sites of proteins form the molecular basis of promiscuous recognition of structurally diverse ligands
Biophysical Reviews (2018)
-
Protein export through the bacterial Sec pathway
Nature Reviews Microbiology (2017)
-
Structure of the quaternary complex between SRP, SR, and translocon bound to the translating ribosome
Nature Communications (2017)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.