In the absence of scattering, electrons propagate freely as coherent waves, analogous to light in free space. Capitalizing on this behaviour, electron-optical elements including beam splitters1,2, quantum point contacts3,4, lenses5, wave guides6,7 and mirrors8 have been fashioned in solid-state two-dimensional electron systems9 (2DESs). The 2DES in graphene hosts chiral electrons10,11,12,13,14, with unique refractive properties and associated novel opportunities for electron optics12,13,15,16. Until recently, disorder-induced scattering has limited implementation of these ideas. Encapsulation of graphene in hexagonal boron nitride (hBN)17,18 now enables striking manifestations of refractive ballistic transport15 including quasiparticle dynamics in superlattices19, snake states20 and Veselago lenses21. A collimated electron source could be the final piece needed to unlock the potential of electron refraction in graphene, enabling diverse applications such as ballistic transistors22,23, flying qubits24 and electron interferometers25. In conventional semiconductor 2DESs, electrons can be collimated by quantum point contacts3 to form narrow beams. In graphene, however, electrons are not readily confined by gates and alternative proposals26,27,28 for collimation in graphene have yet to be realized.

Here we demonstrate experimentally and validate computationally an electron collimator based on a collinear pair of pinhole slits in hBN-encapsulated graphene. We show that grounded edge contacts17—analogous to peripheral surfaces painted black in an optical system—can efficiently remove stray electron trajectories that do not directly traverse the two pinholes, leaving a geometrically defined collimated beams.


Collimator design and function

An absorptive pinhole collimator is constructed from an etched graphene heterostructure with a two-chamber geometry wherein independent electrodes make ohmic contact to each chamber (Fig. 1a). The contact to the bottom chamber (red, Fig. 1a) serves as the source for charge carriers, while the contact to the top chamber (black, Fig. 1a) acts as an absorptive filter. To realize a collimating configuration, the filter contact (F) is grounded and the source contact (S) is current biased; charge carriers are isotropically injected from the source, but only those trajectories that pass through both pinhole apertures reach the graphene bulk. Applying a uniform magnetic field can steer the collimated beam. For an uncollimated configuration, the filter and source contacts are electrically shorted.

Figure 1: Absorptive pinhole collimators.
figure 1

(a) Double pinhole collimator schematic. Current is sourced from bottom contact (red), passes through the bottom aperture and is either absorbed by the top contact (black) or passes into the device bulk. Only trajectories that pass through both apertures reach the bulk, producing a collimated beam. The collimated beam is steered by an external B-field. (b) Optical micrograph of device with four collimators in a Hall-bar-like geometry. Scale bar, 2 μm. (c) Measuring angular distribution. Non-local resistance at n=1.65 × 1012 cm−2 (Fermi wavelength: λf=27.6 nm) is plotted with VS3F3 measured relative to VF1 when current is sourced from both S4 and F4 (blue), and only from S4, whereas F4 is grounded (green). The narrowness of the central peak for the F4-grounded data results from collimation. (d) Theoretical collimation behaviour versus experiment. Left: diagram of effective collimator width w(θ) at a fixed angle for classical ballistic trajectories. Middle: polar plot of theoretical angular dependence for a 300 nm-wide point contact (blue) and a w0=300 nm, L0=850 nm collimator (green). Right: experimental data from c mapped to angle.

Our device consists of hBN-encapsulated graphene etched into a Hall-bar-like geometry with the voltage probes replaced by collimating contacts (Fig. 1b). The hBN layers are both dBN80 nm thick and the device is assembled on dox=300 nm SiO2 atop a degenerately doped silicon substrate used as a back gate to tune charge carrier density n. To test the collimation behaviour of an individual injector in the ballistic regime, we perform a non-local magnetotransport measurement, injecting from one collimator and probing trajectories that reach across the width of the device (Wdev=2 μm) in the collimated and uncollimated configurations (green and blue respectively, Fig. 1c). We inject from the lower right collimator (labelled S4,F4) throughout this Article and, in this case, measure the voltage of the upper right collimator (labelled S3,F3) relative to a reference (F1). In the presence of a B-field, electron trajectories that pass from the injector to collector flow from the injector at an angle , where q is the quasiparticle charge. From this, we find that the angular full width at half maximum (FWHM) is 70° when injecting in the uncollimated configuration and 18° when injecting in the collimated configuration.

For an uncollimated source3, the angular conductance is expected to go as , where is the flux density at the Fermi level and w0 cos(θ) is the projected width of the contact. The collector has an acceptance angle of , leading to an expected cos2(θ) distribution (θFWHM=90°). The 70° FWHM for our uncollimated data is in reasonable agreement with this expectation given that the reference contact collects more electrons at higher B-fields and thus suppresses the signal at high angles.

In our collimators, the flux density at the Fermi level is identical to that in a single slit, but the projected width is geometrically defined by the pinhole width w0 and pinhole separation L0. For small angles |θ|<tan−1w0/L0, the projected width w(θ)=cos(θ)[w0L0|tan(θ)|] (left, Fig. 1d). At larger angles, no carriers should transmit, yielding:

Convolving over the acceptance angle of the collector (see Supplementary Note 1 for details), we calculate the angular conductance distribution (middle, Fig. 1d) for both the uncollimated case (blue) and the collimated case (green) with w0=300 nm and L0=850 nm, consistent with the fabricated collimator dimensions. The FWHM of the collimator emission is 22° for theory and 18° for experiment (right, Fig. 1d), showing that our injectors efficiently filter wide-angle trajectories and transmit narrowly collimated beams.

Conductance of collimators

Having established that the angular distribution of injected charge carriers is well described by classical ballistic theory, we now measure our collimators’ conductance to determine how efficiently electrons traverse the pinholes. For this, we bias the injector in the collimating configuration (F4 grounded) and measure the current reaching all remaining electrodes as a function of gate voltage (Fig. 2a). The conductance of the collimator tunes sublinearly with n: (dotted line, Fig. 2a). This qualitatively agrees with ballistic expectations : integrating equation (1) over all angles, we expect:

Figure 2: Conductance of single and paired collimators.
figure 2

(a) Conductance of collimator measured in a three terminal configuration: S4 is current-biased, F4 is grounded and all remaining terminals are measured with a single current amplifier. The measured conductance (blue) scales as (black dotted line), qualitatively agreeing with ballistic conduction of bulk graphene. Numerical solutions to the 2D Dirac equation (red dots) account well for low-density effects associated with diffraction. (b) Conductance measurements through angularly sensitive collectors. Current is collected at F3+S3 (red), S3 (blue) and S1 (black) with all remaining contacts grounded. F3+S3 has a broad background due to diffuse edge scattering and imperfect ohmic contacts. S3 has a FWHM of 8.5° due to double collimation and has minimal diffuse background. The peak height of S3 indicates nearly perfect ballistic transmission.

The small offset n01.6 × 1011 cm−2 in our measurement appears to result from diffraction by collimator slits (Fig. 2a, see Supplementary Notes 3 and 4 for details). Comparing equation (2), with the fit in Fig. 2a assuming nn0), indicates a conductance that is 35% of expectations. This is a lower bound for the transmission probability, because the collimating filter (F4) can reabsorb electrons that have diffusely scattered off of device edges.

To understand the impact of diffuse scattering and better estimate the transmission probability, we measure the current collected at specific detectors as a function of B-field. Having sourced (see Supplementary Note 6 for details), we collect current in detectors collinear with (red and blue, Fig. 2b) and adjacent to (black, Fig. 2b) the injector. Current collected at the collinear detector with a wide acceptance angle (red) peaks near B=0, as the collimated beam travels straight across the device. The apparent background current is 3–5% of Isource. At B120 mT, ballistic cyclotron orbits instead reach the adjacent detector, leading to a prominent peak in current detected at S1 (black) with F1 grounded. Coincident with this peak, the diffuse background of the collinear detector dips, as ballistic trajectories are consumed by the adjacent detector, reducing the number of electrons that eventually find their way into the collinear detector.

In light of the non-trivial diffuse background, we measure current with a narrow acceptance angle at the collector, rejecting most scattered electrons and thus better determining the transmission probability of the collimator. The resulting doubly collimated beam (blue) has a FWHM of 8.5°. Together, all these collinear apertures act as a single collimator with L0=3,750 nm (the separation between the farthest-apart apertures). All of the injected current passes through the first aperture, so the fractional current collected should be . The maximum of the doubly collimated peak is 0.056 (Fig. 2b). Subtracting a background of 0.005–0.015 (see Supplementary Note 5 for details) suggests transmission through the full path is 1.18±0.12 times the expected value. The 20% beamwidth narrowing observed above for a single collimator (18° versus 22° expected) may indicate modest focusing, which would be consistent with slightly enhanced transmission through the double collimator. The excellent quantitative agreement shows that charge carriers transmit nearly perfectly from slit to slit. By demonstrating not only narrow beams but also high transmission probabilities, our measurements show that absorptive pin-hole filtering could produce low-noise, coherent, collimated beams of electrons in 2DESs that cannot be depleted by electrostatic gating.

Transverse electron focusing

Having experimentally demonstrated that absorptive pinhole collimators can controllably emit electron beams in hBN-encapsulated graphene heterostructures, we illustrate our technology’s utility by aiming a beam at the edges of our graphene device to learn about the low-energy scattering behaviour of etched edges in these heterostructures. We perform three simultaneous non-local resistance measurements (Fig. 3a) to probe the specularity of reflections off various edges of the device. In Fig. 3b, we map as a function of B-field and electron density. In both the electron-doped and hole-doped regimes, a peak near B=0 corresponds to ballistic quasiparticles being collected by the collinear contact in the absence of magnetic deflection. Peaks in R1 also appear at higher fields, primarily in the hole-doped regime (n<0). For reference, we plot contours corresponding to cyclotron radius r=W/2. Any features outside the parabolas (r<W/2) cannot correspond to direct ballistic quasiparticle transport across the width of the device and must involve scattering. These data imply that holes undergo multiple reflections at high B-fields, suggesting that the edges may scatter more specularly when hole-doped than when electron-doped.

Figure 3: Probing edge scattering.
figure 3

(a) Non-local resistance measurement schematic. (b) Resistance map characterizing angular profile of injected trajectories. A central peak near B=0 corresponds to the beam passing straight across the width of the device (a small angular offset is due to fabrication imperfections). The remainder of the electron-doped regime (n>0) is nearly featureless, whereas the hole-doped regime (n<0) has several auxiliary peaks. Dotted lines correspond to cyclotron orbits with radius equal to the half of device width (r=Wdev/2); features outside the two parabolas cannot correspond to direct ballistic trajectories between injector and collector. (c) Collimated transverse electron focusing. A sharp feature at r1=1.25 μm corresponds to trajectories that pass through four pinholes. Features at higher magnetic field must involve specular reflections off of the device edge. There is no such feature on the electron side, whereas there is a noticeable band on the hole side. (d) Comparison of experimental data with classical ballistic simulation. Experimental data (blue) are taken at n=2.7 × 1012 cm−2 and simulation (red) assumes fully diffuse edge scattering and 67% ohmic transmission.

To directly probe the specularity of reflections in our device, we perform a collimated transverse-electron focusing (TEF) measurement8,29. Probe V3 at the lower left detector is even more sensitive than traditional TEF measurements to scattering that modifies ballistic trajectories, as here the injector and detector have narrow emission and acceptance angles, respectively. as a function of electron density and B-field has several distinct features associated with specific cyclotron radii (Fig. 3c), in particular for hole doping. At r1=1.25 μm, there is a sharp peak with a FWHM of 300 nm in both the hole and electron regimes. Although a conventional TEF peak would occur at , where Llat=2.3 μm is the lateral separation of injector and detector, our measured peak corresponds to slightly greater cyclotron radius. This is expected for our collimator geometry: we illustrate the expected r1 trajectory in Fig. 3a and plot its corresponding contour in Fig. 3c, indicating excellent agreement with our measurement (see also Supplementary Note 2 for calculation). Trajectories at r1 are insensitive to edge scattering, whereas at smaller r (larger B) additional peaks imply specular reflection. In the electron-doped regime the presence of a prominent peak at r1 with no appreciable secondary peak suggests completely diffuse scattering, whereas in the hole-doped regime the presence of a significant secondary peak suggests appreciable specular reflection.

To validate this understanding and quantitatively determine the degree of specularity, we next carry out device-scale simulations of ballistic trajectories—treating electrons as classical point-like particles is warranted given that the Fermi wavelength λf is in most cases much smaller than geometric features in our device and given that most trajectories are captured in ohmic contacts before having a chance to interfere. Modelling the fabricated device geometry including all ohmic contacts, we simulate electron emission from the injector, allowing for reflection off edges and interaction with floating or grounded ohmics. With two free parameters, transmission of ohmics ptrans and probability of diffuse edge scattering pdiffuse, we simulate the measurement configuration shown in Fig. 3a–c (see Supplementary Note 7 for simulation details). The striking similarities between simulation (ptrans=67% and pscatter=100%) and measurement suggest that edge scattering is diffuse in our device in the electron-doped regime (Fig. 3d, see Supplementary Movie 1 for visualizing a B-sweep). Similar analysis yields ptrans=10% and pscatter=67% in the hole-doped regime, quantitatively demonstrating significant electron-hole asymmetry in both ohmic contact properties and specularity of edge scattering in our device. This asymmetry may occur due to finite edge doping that induces smooth electrostatic edge barriers30 in the p-doped regime.


The strong agreement between theory and experiment for both individual collimators and our entire collimating device indicates that absorptive collimation in high-mobility graphene devices can be predictably and robustly applied in a variety of geometries, opening the door for scientific and technological use of narrow electron beams in 2DESs. For example, Klein tunnelling12,13,31 and Andreev reflections32 are highly angularly dependent phenomena whose experimental signatures are obscured in typical transport experiments. In such cases, collimation-based measurements will illuminate the physics by quantitatively testing transmission and reflection at specific angles rather than integrated over a range of angles as in past experiments. In addition, novel technologies such as ballistic magnetometers may be built on the sharp magnetotransport features we achieve. Collimated sources are an important addition to the growing toolbox of electron-optical elements in ballistic graphene devices that enable a new class of transport measurements.


Sample fabrication

Flakes of graphene (from highly oriented pyrolytic graphite, Momentive Performance Materials ZYA grade) and of hBN (from single crystals grown by high-pressure synthesis) were prepared17 by exfoliation (3M Scotch 600 Transparent Tape) under ambient conditions (35–60% relative humidity) on n-doped silicon wafers with 90 nm thermal oxide (WRS Materials). The heterostructure was assembled by a top–down dry pick-up technique19. The completed heterostructure was deposited on a chip of n++-doped silicon with 300 nm thermal oxide (WRS Materials). Polymer residue from the transfer process was removed by annealing the sample in a tube furnace for 1 h at 500 °C under continuous flow of oxygen (50 s.c.c.m.) and argon (500 s.c.c.m.)33. Device patterns were defined by e-beam lithography and reactive ion etching19. Ohmic contacts were established to the device using electron-beam evaporated Cr/Au electrodes to the exposed graphene edge17.


All measurements were performed at 1.6 K in the vapour space of a He flow cryostat with a superconducting magnet. Lock-ins (Stanford Research Systems SR830) at 17.76 Hz were used in all measurements; voltages were measured with Stanford Research Systems SR 560 voltage preamplifiers and currents were measured with Ithaco 1,211 current preamplifiers. The charge density n was calculated from Shubnikov-de-Haas oscillations , in good agreement with the expected geometric capacitance.

Data availability

The data sets generated during and/or analysed during the current study are available from the corresponding authors on reasonable request.

Additional information

How to cite this article: Barnard, A. W. et al. Absorptive pinhole collimators for ballistic Dirac fermions in graphene. Nat. Commun. 8, 15418 doi: 10.1038/ncomms15418 (2017).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.