The chemistry of the Earth’s atmosphere close to the surface is known to be strongly influenced by vegetation. However, two critical aspects of the forest environment have been neglected in the description of the large-scale influence of forests on air pollution: the reduction of photolysis reaction rates and the modification of vertical transport due to the presence of foliage. Here we show that foliage shading and foliage-modified vertical diffusion have a profound influence on atmospheric chemistry, both at the Earth’s surface and extending throughout the atmospheric boundary layer. The absence of these processes in three-dimensional models may account for 59–72% of the positive bias in North American surface ozone forecasts, and up to 97% of the bias in forested regions within the continent. These processes are shown to have similar or greater influence on surface ozone levels as climate change and current emissions policy scenario simulations.
The chemistry of the Earth’s atmosphere close to the surface is known to be strongly influenced by the presence, absence, and type of vegetation, via hydrocarbon emissions1,2 and deposition to the foliage3,4. These factors are common components of the computational models of atmospheric chemistry5,6,7,8, which are in turn used for air pollution forecasting for current and future climates, and to formulate public policy with respect to regulation9. Other processes of importance in the atmosphere (transport, dispersion, gas and particle chemical reactions, emissions from human activities and particle microphysics) are of acknowledged importance and are accordingly represented in these models.
One of the key chemical species predicted by models of atmospheric chemistry is tropospheric ozone, due to its negative impacts on human health10, the ecosystem, and crop production11. However, evaluations of these models5,7,12 through the use of ozone monitoring network data7,12 reveal they consistently over-predict surface ozone levels. This high bias is a long-standing issue that has persisted despite improvements to virtually all model components. For example, multiple model simulations of summer ozone across North America maintain positive biases of 5–12 p.p.b.v. throughout the diurnal cycle7. Locally, positive biases may be much larger, up 20 p.p.b.v. during the summer months5. An example of the spatial distribution of ozone biases for the month of July for North America is shown in Fig. 1a, using simulations carried out with version 2.1 of Environment and Climate Change Canada’s Global Environmental Multiscale-Modelling Air-quality and Chemistry (GEM-MACH) air pollution forecast model6,7,8,13. The biases maximize over the eastern half of the continent, and along the California coastline. Multi-model ensembles7,12,14 show that this is a common problem, with North American normalized mean biases (Fig. 1b) ranging from −10 to +26% and usually positive.
Most models and their ensemble show larger local positive biases, particularly when the data are examined regionally14. Figure 1c shows the bias performance of an ensemble of models for the regions outlined in black dash lines in Fig. 1a; the largest biases occur in the central to eastern sections of North America. Seasonally, these positive biases are the most pronounced in the summer14. While ozone biases in winter have been linked to transcontinental transport15,16, the larger summer bias within continents indicates missing processes as opposed to transport from abroad.
Parallel to these modelling efforts, measurements of ozone concentration in the forest research community have shown pronounced differences with height in dense forest canopies, suggesting a very different chemical environment exists above versus below the foliage17,18,19. These observations are consistent across very different forest environments. Measurements in the Amazon rain forest17 indicate an 80% decrease in ozone from above the forest (79 m) to near-ground (0.5 m). Measurements and one-dimensional modelling for a forested site in central Massachusetts18 showed decreased ozone of more than a factor of two going from above to below canopy. Past observations from the Borden Forest Research Station19 showed a decrease in average ozone on the order 10–15 p.p.b.v. from above the canopy (42 m) to surface (1.5 m), with the greatest differences occurring in the summer months, and the smallest differences in the winter.
The sequence of reactions leading to the production of ozone is critically dependent on light intensity and wavelength20. If the light intensity becomes sufficiently low, ozone formation is inhibited due to lower formation rates of the hydroxyl radical and lower conversion rates of nitrogen dioxide to nitrogen oxide via photolysis. In addition, increases in stability near the surface of the Earth at night may allow the build-up of chemicals favouring ozone destruction (via, for example, ‘titration’ reactions with nitrogen oxides and/or double-bonded hydrocarbons). Reductions in light levels associated with foliage21,22 are thus one possible cause for the observed decreases in ozone below foliage, consistent with known ozone chemistry. In addition, observations of forest canopy turbulence at multiple sites23,24 suggest that vertical diffusivity in the under-canopy region will be greatly reduced, partially decoupling this region from the rest of the atmosphere, and increasing the relative influence of chemistry on ozone formation and destruction below the foliage. The reduced diffusivity may slow the upward transport of surface-emitted species such as nitric oxide, and hydrocarbons such as alkenes, increasing their concentrations in the below-canopy space. In a well-lit environment, higher concentrations of these species would lead to ozone formation (the dominant reactions being the conversion of nitric oxide to nitrogen dioxide via oxidation reactions, followed by nitrogen dioxide photolysis creating triplet-state monatomic oxygen, in turn biasing the balance of reactions towards ozone formation). However, in the darkened environment below the foliage, the dominant reactions are those of ozone ‘destruction’ through ‘titration’; the reaction of nitric oxide and/or alkenes with ozone itself. Large Eddy simulation (LES) studies with passive (that is, non-reactive) tracers25,26 have demonstrated these ‘trapping’ effects of forests, as well as a third important process: species emitted in ‘non-forested’ regions will collect and be trapped in adjacent downwind ‘forested’ regions. This ‘collection’ effect may further enhance the below-canopy pool of precursors to ozone destruction, in the darkened below-canopy environment. These combined effects may result in a shift of photochemical regime away from ozone production and/or towards enhanced ozone destruction.
Here we show that tropospheric ozone is significantly reduced through the combined effects of forest canopy shading and turbulence. About one-third of the reductions can be attributed to forest canopy shading alone, with an additional two-third of the net reduction attributable to the forests’ reduction in turbulence relative to non-forested environments. The inclusion of these processes largely corrects the long-standing positive bias in forecasts of North American surface-level ozone, and may account for a known deficiency in the data assimilation of satellite-derived ozone columns.
Forest canopy ozone formation and removal
Our investigation began with a re-examination of our multi-year record of observations within Borden Forest, at fixed heights throughout the canopy19. Ozone data were aggregated by season at the observation heights; these demonstrate the decrease in average ozone below the foliage seen in other studies (Fig. 2a). We found that the fraction of above-canopy photosynthetic photon flux density (PPFD), transmitted through the foliage to the ground, minimized in the summer months (Fig. 2b,c). The cause of this reduction in light intensity is the increased attenuation of light due to the presence of the leaves from deciduous vegetation, present only from spring through fall. Our observations thus demonstrate the co-location of the reduction in light intensity with the drop in ozone concentrations noted above.
The multi-model simulations of Fig. 1 and observation data shown in Fig. 2 led us to consider the potential influence of foliage shading and turbulence on larger scale ozone formation and destruction, possibly accounting for the positive biases shown in Fig. 1, and present in many other regional model simulations5,12,14. We hypothesize that, relative to non-vegetated surfaces, foliage-induced attenuation of downward radiation, combined with foliage-induced modifications to vertical diffusivity, suppress daytime photochemistry and limit the vertical mixing of chemicals emitted near the Earth’s surface. These combined effects result in a shift of photochemical regime away from ozone production and/or towards enhanced ozone destruction.
Global forest canopy satellite data
Satellite-data-derived images of canopy height and vertically integrated leaf area per unit ground area (Fig. 3a,b) provide some support for the hypothesis, in that the regions with the deepest forests (Fig. 3a) and thickest foliage (Fig. 3b) correspond reasonably well to the locations of positive ozone biases in Fig. 1a. Multi-model ensembles of European ozone predictions12,14 compared to the same global forest canopy satellite data have a similar correspondence between positive ozone biases and forest locations (not shown). The location of deep forests across the world (Fig. 3c) suggests that forest processes may have a significant impact on global near-surface atmospheric chemistry.
Spatial representativeness of air quality models
We note that a key issue for air quality models is that of spatial representativeness—the ability of a model to distinguish small features in the domain is limited by the available computation resources, and current large-domain air-quality models have resolutions typically on the order of 2.5–30 km. As a result of these resolution limitations, observational data sets, which are collected at specific points in space, must be compared to average conditions over regions between 2.5 × 2.5 and 30 × 30 km2. The extent to which the observations and model values match will thus depend in part on the extent to which the upwind footprint of the observations represents the actual conditions within the region encompassed by the model grid-cell, as well as on the extent to which the model input databases represent the vegetation characteristics within that grid cell. All chemistry and transport processes, including the forest mixing and shading examined here, thus, represent average conditions within the smallest volume resolvable by a model. Despite issues of spatial representativeness, transport of low concentration ozone from forested to non-forested regions will also impact total ozone levels in the latter. With horizontal advection, low ozone concentrations in forested regions surrounding a city may thus reduce ozone levels in the latter.
Forest canopy simulations using GEM-MACH
We evaluated our hypothesis using our chemical transport model (GEM-MACH, versions 2 and 2.1), after modifying the model to include a canopy parameterization with two approaches for vertical diffusivity applied separately to the two model versions (see Methods). Four sets of simulations were carried out on GEM-MACH’s operational 10 km resolution North American forecast domain; two ‘base case’ simulations using different versions of the unmodified model (versions 2 and 2.1, the latter including updates for urban heat island and the Obhukov Length, see Methods), and two simulations wherein vegetated canopy parameterizations were added to the base case simulations. The second of these canopy simulations investigated the extent to which changes to the shape of the expected profile of vertical diffusivity in response to stability might impact model performance. The simulations mimicked a three day forecast procedure, comprising consecutive, linked, three day forecasts at 0 and 12UTC spanning the month of July, 2010. Statistical evaluation of the model performance in each simulation was carried out using surface network hourly observations of ozone.
The forest canopy and surface ozone
The change in mean bias at observation stations between the canopy and base case simulations for GEM-MACHv2.1 is shown in Fig. 4a. Comparison with the corresponding ‘base case’ simulation of Fig. 1a shows that the forest canopy parameterization has significantly reduced the ozone bias in many of the regions with the highest positive bias in the original simulation, due to the prevalence of dense vegetation in those regions. The use of the forest parameterization decreases bias error to a level below that of the previous multi-model simulations (Fig. 4b), compare light grey (base case) versus dark grey (canopy) columns, for GEM-MACHv2 (base case: triangle, canopy: square) and GEM-MACHv2.1 (base case: circle, canopy: star). The normalized mean bias values in different regions of North America are also substantially reduced through the use of the canopy parameterization, in some regions to values very close to zero (Fig. 4c).
The change in the average ozone concentration at every model grid-cell is shown in Fig. 4d. The canopy parameterization has an impact throughout the model domain, usually resulting in ozone decreases, with the greatest decreases in the California and south-eastern USA forests, and lower decreases in the boreal forests of Canada. Ozone increases in Los Angeles, and slight increases may be seen in other areas. The impact of the canopy parameterization is widespread, and covers regions outside of the regions with high leaf area index (LAI) and canopy heights of Fig. 3a,b, such as the central plains of North America, and the downwind area of much of the Atlantic. This demonstrates that downwind transport of low-ozone air from canopy to non-canopy regions is sufficient to decrease ozone levels in the latter.
The forest canopy and boundary layer ozone
We have used ozone mass ratios from the third day of successive 0 UT simulations to show the influence of the canopy in the vertical dimension. The original hourly v2.1 model 3D ozone values were averaged on a daily and monthly basis, and (canopy/base case) ratios were constructed. A cross-section through these data, located in the centre of the most heavily forested part of eastern North America (Fig. 4b), is shown in Fig. 5 for the monthly mean ozone ratio (Fig. 5a), and the daily mean ozone ratio for July 4th and July 27 (Fig. 5b,c, respectively). The figure shows that the influence of the forest canopy on ozone concentrations extends to heights far above the canopy layers or the lowest resolved original model layer, with ratios <1 throughout most of the atmospheric boundary layer.
Zones of lower ozone mass, due to the incorporation of the canopy parameterization, may be seen in all panels of Fig. 5, at both the lowest model layers and between heights of ∼850 to 690 mb (elevations of roughly 1,450–3,250 m above the surface). This overall depression of monthly average ozone mass in the upper part of the atmospheric boundary layer (Fig. 5a) is linked to shorter-term events in which lowest level air is transported upwards towards the top of the atmospheric boundary layer—examples of daily averages with these events may be seen in Fig. 5b,c. Roughly half of the daily averaged ratios constructed showed these events along this cross-section. Isolated high ratios in these cross-sections are linked to similar events occurring further upstream. Figure 5 shows that the canopy parameterization, due to this coupling between the lowest model layer and the rest of the atmospheric boundary layer, results in a monthly average ozone mass mixing ratio ‘reduction’ near the ‘top’ of the atmospheric boundary layer of up to 12%, and that daily average ozone mass mixing ratio reductions in the same area may reach 40%. These effects are in addition to the reductions near the surface which may be seen in Fig. 5, and are discussed and evaluated elsewhere in this work. An animation of the reduction in ozone resulting from the use of our forest canopy parameterization, with three-dimensional contouring of ozone concentration reduction factors of 0.95, 0.80 and 0.50, is included as Supplementary Movie 1.
This comparison shows that the forest canopy has a significant influence on ozone concentrations throughout the atmospheric boundary layer, due to interactions between the resolved scale meteorology and the region encompassed by the forest canopy itself.
The canopy processes examined here may help explain a known deficiency in global chemistry models employing data assimilation of satellite column ozone to attempt to improve model performance27. These efforts led to unwanted increases in positive ozone biases in the eastern USA, with the attribution of these effects to ‘errors in the ozone sources or sinks in the boundary layer mixing in the model’. Our results suggest that at least part of these errors may be attributable to the forest canopy processes discussed herein, and that data assimilation efforts to improve tropospheric ozone forecasts would improve with the inclusion of forest canopy shading and turbulence, in global and regional air-quality models.
Evaluation at Borden Forest Research Station
The model’s ability to capture the ozone profile at Borden Forest Research Station is shown in Fig. 6, in the lowest model layer resolved in the original vertical coordinate system (Fig. 6a,b; R=0.74), and at 2 m altitude (Fig. 6c,d; R=0.59). The decrease in ozone concentrations between the lowest layer resolved in the original coordinate system and 2 m is also shown (Fig. 6e,f, R=0.35). While the main impact of the canopy parameterization is to reduce the ozone bias (as shown in Fig. 6a–d, in accord with the North American monitoring network evaluation shown above, the observed time series in the difference term (blue line, Fig. 6e) shows that differences between the layer average and 2 m ozone values have a significant time variation. The canopy parameterization captures at least some of the broad features of that variation (for example, compare blue to red line: high values in the difference between 2 and 9 July, increases in the difference between 12 and 14 July, 23 and 25 July and 27 and 29 July). The canopy parameterization shows at least some capability to capture the day-to-day variation in the daily differences which make up the average change in the mean bias, albeit at a relatively low correlation coefficient.
Policy relevance of the forest canopy
To place the magnitude of these changes in context relative to policy-relevant simulations from the literature, Fig. 7a compares the North American change in average ozone bias due to the forest canopy with the average ozone changes associated with other simulations designed to study feedbacks between weather and air-pollution6 and European emissions reduction28. The vegetation-derived changes in ozone are of similar or larger magnitude than the changes described in the latter simulations. Figure 7b compares literature values for the largest local change in average ozone associated with the canopy effects to the largest local changes associated with policy-relevant scenarios for climate change29,30,31, and specific emissions reduction targets32,33,34 both in North America and world-wide. The canopy parameterization has a larger local effect than these scenarios (−23 p.p.b.v., GEM-MACHv2), underscoring its importance for accurate simulation of the atmosphere, although we note that the magnitude of the changes from the referenced work may in part depend on the resolution of the underlying model framework. We note that these comparisons are for surface ozone changes only—while we have shown in Fig. 5 that the impacts of the forest on ozone levels extend throughout the atmospheric boundary layer, we are unable to show similar comparisons for the references quoted.
Statistical evaluation of model performance
A summary of the hourly ozone statistics35 for North America for the four simulations are presented in Table 1. We find that the addition of forest canopy processes removes 59% of the positive bias in the operational GEM-MACHv2 ozone forecast, and 72% of the positive bias in the GEM-MACHv2.1 forecast. The two different canopy vertical diffusivity parameterizations also resulted in different levels of absolute decrease in the North American ozone mean bias; 2.50 p.p.b.v. for the v2 parameterization, and 4.51 p.p.b.v. for the v2.1 parameterization, suggesting that the shape of the within-canopy profile of the variance in vertical velocity in response to larger-scale atmospheric stability may have a significant impact on surface atmospheric chemistry. The forest canopy parameterization also improves the variance (reduced by one-third in the v2 simulations and by 8% in the v2.1 simulations). Some of the other statistics are also improved in the second to third decimal place (root mean square error, mean gross error, coefficient of efficiency and index of agreement). The model performance for the correlation coefficient, fraction of predictions within a factor of two, and covariance was degraded in the second decimal place. The largest relative change across the different error statistics was in the reduction in bias. As noted above and in Figs 1b,c and 4a, these improvements in bias performance are much higher when sub-regions dominated by forests are analysed. For example, the forest canopy processes reduce the magnitude of the bias of the GEM-MACHv2.1 in regions NA2, NA3 and NA4 by 58, 63 and 97%, while increasing the magnitude of the bias in region NA1 slightly (7%).
Light attenuation versus canopy turbulence
The relative importance of the reduction in photolysis rates versus resolved canopy turbulence was examined in a set of simulations in which only photolysis rates were modified. The gas-phase chemistry of the lowest resolved scale model layer was calculated twice at every time-step in the otherwise unmodified model, once using the original photolysis rates, and once using photolysis rates which had been attenuated with the full LAI depth of the forest canopy. The results of these two lowest layer calculations at each time-step were then averaged, effectively assuming instantaneous mixing between above- and below-canopy conditions. The results of this ‘photolysis alone’ simulation were compared to the base case, and resulted in a relative reduction of ozone mean bias of 19% (compared to 59% for the v2 simulation of Table 1). About one-third of the reduction in ozone concentrations may thus be attributed to the reduction in photolysis rates, and a further two-third of the reduction may be attributed to the separation in chemical regimes resulting from the turbulence parameterization and additional model layers.
We note that LES simulations of non-reactive tracers25,26, coupled with our findings, have implications for the monitoring of ozone formation/destruction precursor chemicals: monitoring instrumentation located in clearings or small towns surrounded by forest may report lower concentrations of these species than in the surrounding forests. Monitoring instrumentation at such locations may not be spatially representative of the surrounding terrain.
Our results are based on a single month’s model simulation; longer simulations are planned. Further improvements to the parameterization may be possible with better forest classification, leaf-area and clumping index data. Our approach for parameterizing within-canopy turbulence has been employed and evaluated in past one-dimensional models36,37,38,39, but we note that the approach does not simulate some aspects of that turbulence (for example, counter-gradient fluxes40). Improvements to the manner in which within-canopy turbulence is parameterized within regional chemical transport models should thus be a focus for future work, along with measurement campaigns to improve on these parameterizations, and improvements to satellite retrieval algorithms used to recover the necessary model inputs for the parameterizations. Furthermore, we do not rule out other potential contributing factors to the ongoing positive ozone bias (such as errors in input emissions data). We have found in other work41 that sub-grid-scale variability (the extent to which small towns and villages within forested regions are resolved by a given model resolution) can also significantly affect the canopy parameterization results; applying the parameterization to higher resolutions may also be beneficial. Our methodology should be treated as a first stage in what we hope will be an increased research focus on forest processes and their influence on regional and global chemistry.
Despite these limitations, our results show that the forest environment has a significant influence on atmospheric chemistry near the surface of the Earth, and throughout the atmospheric boundary layer, and are in accord with observations at forested sites. The resulting decreases in ozone have been shown to encompass a very large extent of North America, and will likely impact regions with significant forest canopies (from Fig. 3c, these include the northern boreal forests of North America and Russia, the world’s rainforests and smaller regions, such as South-eastern Europe, South-west Asia and Japan).
First, the theoretical basis for the attenuation of light in vegetated canopies may be derived from Beer’s Law as the probability of beam penetration (which may also be interpreted as the fractional light penetration) to a given level z below the top of the canopy, using equation (1) below21,22:
where P(θ) is the probability of beam penetration at solar zenith angle θ, G(θ) is the projection of unit leaf area in the θ direction (for a spherical leaf distribution, the usual assumption, G=0.5), Ω(θ) is the clumping index (a measure of the randomness of the leaf spatial distribution, Ω=1 if the leaves are randomly distributed), and LAI(z) is the total LAI (the one-sided leaf area in the column per unit ground surface area) downwards from the canopy height to the given level within the canopy. Our approach is to use equation (1) as a proxy for the reduction in light associated with canopy shading; our photolysis rates being scaled down using the ratio of the above (LAI=0) to within or below canopy values of equation (1). Note that we have made two approximations in the above—the diffuse component of the incoming radiation is assumed to attenuate in the same manner as the direct component, and the attenuation is assumed to be independent of wavelength.
Second, turbulence parameters such as the variance in the Eulerian vertical velocity, when plotted with a vertical coordinate scaled to the canopy height and scaled by parameters such as the friction velocity, show a remarkable similarity in profile shape across different vegetation types and canopy heights23,40,42,43. The localized near-field theory first proposed by Raupach24 and adopted to one-dimensional canopy models36,37,38,39 has been used here to approximate turbulent mixing throughout the canopy. We link the resulting diffusivity profiles to the resolved scale by their normalization to the above canopy diffusivity of the driving meteorological model. The approach and its limitations are discussed below (Coefficients of vertical diffusivity within the canopy).
Briefly, the overall approach taken followed four stages. In the first stage, satellite-retrieval derived LAI, Ω(θ), canopy height data, vegetation fraction and population density data, were used to determine which model grid cells contain vegetated canopies (described in more detail below). The second stage comprised the use of vegetation-class-area weighted vertical profiles of LAI, and equation (1), to describe light attenuation for those model grid cells containing canopies, with this attenuation employed to reduce photolysis rates within and below the foliage. The third stage employed the above data to define the shape of profiles of the Eulerian vertical velocity throughout the canopy, which were in turn used to extend diffusivities resolved by the driving meteorological model down through the canopy. The final stage made use of additional model levels, added locally for canopy locations, to represent the within and below canopy region. This required splitting the core of the chemical transport model into two sets of model processes (one for all columns containing forest canopies, and one for all columns without forest canopies).
Observations at Borden forest
The Borden Forest Research Station is located in a mixed deciduous forest in Southern Ontario, Canada (44°19′N, 79°56′W, shown by a red star in Fig. 4d). The forest is a natural regrowth from farmland abandoned about 100 years ago. The forest consists of 52% red maple (Acer rubrum L.), 14% eastern white pine (Pinus strobes L.), 8% largetooth aspen (Populus grandidentata Michx.), 7% white ash (Fraxinus americana L.), 6% American beech (Fagus grandifolia) and 13% other species. The canopy height (h) near the flux tower is approximately 22 m with a peak LAI of ∼4.6 m2 m−2 in summer. Long-term ozone measurements at the Borden Forest were conducted between 2008 and 2013 (refs 19, 43).
Ozone profiles were measured by drawing air from 6 levels (41.5, 33.0, 25.7, 16.5, 5.3 and 1.0 m above ground) on a scaffold tower down 1.27 cm OD Dekabon tubes at a flow rate of 18 l min−1 to a switching manifold in a trailer at tower base. From there, 1 l min−1 was sub-sampled into trace gas analysers at 3 min intervals for each level. Ozone was quantified with a real-time ultravilet absorption instrument (Thermo Environmental Inc. Model 49C). The instrument was calibrated against NIST traceable standards on average every 6 weeks. Ozone losses in the sample line, quantified to be 9% through separate tests, were corrected to finalize the data.
PPFD above the canopy (33 m) was measured with a point quantum sensor (Li-190SA, Li-Cor Inc.), and below (1.5 m) the canopy with a line-integrating quantum sensor (Li-191, Li-Cor Inc.).
The value of G × Ω in equation (1) at Borden was found to be 0.42; this is in reasonable agreement with the satellite-date derived value at the same model grid cell of 0.39.
The details of this online chemical transport model’s formulation may be found in the references provided above, along with a comparison of its performance relative to observations and peer-group models. As is the common practice with chemical transport models, specialized solvers are used for each component of the net differential equation describing a chemical’s rate of change, combined using the operator splitting technique44 (for example, gas-phase chemical rates of change are solved using a specialized ‘stiff differential equation solver’). The model domain used here is a 0.09°- (∼10 km) resolution rotated latitude/longitude grid covering North America (750 × 620 grid cells), used by Environment and Climate Change Canada for operational air-quality forecasts. The most recent operational configuration of the model (GEM-MACHv2) was used for our simulations. This version includes improvements to the modelling platform subsequent to the referenced material, notably improved mass conservation within the advection code, improved treatment of surface emission and deposition fluxes, and the addition of MOZART reanalysis-derived boundary conditions. Our second set of tests started from GEM-MACHv2.1 as a base case (this version of the driving model includes harmonization of Obhukov Length parameterizations between the driving meteorological and chemistry portions of the model, and a simple parameterization for the inclusion of anthropogenic heat sources on the model’s radiative budget45). However, the only difference between ‘canopy’ and ‘base case’ simulations for our four simulations was the presence or absence respectively of the forest canopy parameterization within the model.
Criteria for using a canopy parameterization
Here we consider the conditions under which a vegetated canopy might be capable of altering the light and diffusivity conditions as noted above. Vegetated canopies which are too shallow to constitute a significant proportion of the first model layer (hence unlikely to influence the simulated chemical environment) can be ruled out, hence we exclude vegetated canopies less than 0.5 m in height. The canopy needs to be continuous in order to affect light and diffusivity significantly, hence we exclude grid cells for which the forest cover is less than ½ of the cell area, or for which more than 45% of the incident light for an overhead sun reaches the surface, and which have heights <18 m. We further assume that city core areas will not have vegetated canopies, hence regions with population densities greater than 50,000 per 10 × 10 km grid cell are eliminated. Very low LAI values imply little impact on shading or diffusivity—hence the lower limit of LAI for which the parameterization is applied is 0.1. The grid cells not excluded by these criteria are treated using the canopy parameterization.
Canopy layer structure and vegetation vertical distribution
For vegetated canopies, we add three additional layers to the vertical structure of the model, intended to represent the main changes in canopy vertical diffusivity and LAI in the vertical dimension (the latter influencing equation (1) at each layer), at z=hc, z=0.5hc and z=0.2hc, where hc is canopy height for the given grid cell, obtained from satellite retrievals46. The parameterization requires the vertical distribution of leaves within the canopy in order to determine the photolysis rates for each successive canopy layer. Typical leaf vertical distributions from the literature47,48,49,50 for deciduous, coniferous and mixed forests were assigned to the 230 Biogenic Emissions Landuse Database, version 3 (BELD3) vegetation classifications51; land-use fraction weighted combinations of these values were thus used to create grid-cell-specific LAI vertical distributions (see Supplementary Data 1 and 2). Similarly, land-use-weighted values of clumping index were derived by assigning initial estimates from the literature52,53,54,55,56,57 to the BELD3 land-use classifications, these values were adjusted to create BELD3 clumping index values matching MODIS satellite retrieval estimates55 (Supplementary Data 1). Spatially gridded vertically integrated total LAI was derived from MODIS retrievals58, as described below.
The resulting LAI distributions, clumping index values were applied using equation (1) to determine the attenuation of light at each canopy layer interface and midpoint, hence deriving vertically integrated net attenuation weights for each layer. These weights were subsequently applied to the above-canopy photolysis rates, creating attenuated photolysis rates for each canopy layer. Attenuation was also applied to PPFD using the BEIS3 emissions algorithms2; downward cumulative LAI values and the LAI distributions were used to determine the PPFD penetrating to each layer, and the mass of biogenic emissions from each layer. These were emitted directly into the given layers rather than as a surface-based mass flux, aside from NO emissions, which are derived from soil sources, and remained as a surface flux.
Coefficients of vertical diffusivity within the canopy
Our procedure for assigning turbulence within the forest canopy follows the near-field theory first proposed by Raupach24 and adopted to one-dimensional canopy models34,36,38,39, scaled to diffusivities provided by the driving meteorological model. The approach makes use of the following formulae24 to describe the canopy vertical diffusivity profile shape:
In the above equations, z is the height above the Earth’s surface, z1 is the height of the lowest model layer before the application of the canopy parameterization, hc is the canopy height, u* is the friction velocity, TL is the Lagrangian timescale and K is the vertical diffusivity. The variance in the Eulerian vertical velocity () was defined in two ways; for GEM-MACHv2 simulations, a profile chosen to represent a real canopy under neutral conditions was used24
For GEM-MACH2.1 simulations, we noted that a better fit to observations than (5) would be to combine the average profile of from multiple observation studies23 with the observation that the shape of the σw profile with height ‘flattens’ with increasing stability59. Stability is controlled at scales larger than the canopy by the driving meteorological model, which in turn sets the magnitude of the diffusivities via the ratio expressed in equation (2). The key concern with equations (5), and , (6) through (9), which follow, is that they adequately represent the shape of the resulting profile in σw, hence the profile of diffusivity, which in turn is normalized by the meteorological model’s diffusivity at the resolved scale.
Our approach was to follow the available observations59 of σw profiles to the greatest extent possible. First, we noted that the σw/u* profile of equation (5) (ref. 24) when over-plotted with the data from multiple neutral conditions observation studies23,42, tended to over-predict the magnitude of σw below the canopy height. The coefficients of (5) were adjusted to create a σw/u* profile centred in the distributions of these observation data23,42. The resulting equation for this observation-centred σw/u* profile was
For the GEM-MACHv2.1 simulations, equation (6) was used for neutral atmospheres (−0.1≤hc/L<+0.1), given that the corresponding suite of observations were for neutral atmospheric conditions.
Observations of σw/U(34 m) were segregated into neutral and stable environments were available from one measurement study59. These profiles showed that above the canopy, the rate of increase in σw/U(34 m) with decreasing stability (that is, going from stable to neutral conditions) was much larger above the canopy than near the surface. Ratios of the values of for stable and neutral conditions were constructed from these data, resulting in ratio values of 4 and 2.5 for stable and neutral conditions, respectively. The neutral atmosphere value of this ratio from (6) is 4.0, conforming to these observations. For stable atmospheres, we noted that the trend of the flattening of the σw with increasing stability59 would imply a flat profile (no variation in σw with height) for stability levels with hc/L>0.9. We therefore set the slope of σw versus u* to be constant for very stable conditions:
In order to have a smoothly varying change in the profile shape between neutral and very stable atmospheres, equation (6) was modified, so that the coefficients determining its vertical variation would asymptotically approach the neutral atmosphere solution at hc/L=0.1, and the very stable atmosphere solution at hc/L=0.9:
We note that this formula provides an above-canopy to surface level σw ratio of 0.5 when hc/L=0.5, in accord with the available observations59.
The available data59 categorized the change in σw for stable (defined in that reference as hc/L>0.5) and neutral (−0.1≤hc/L<+1) environments, but no data were available for unstable environments. The observed change in the above-canopy to surface ratio in σw from stable to neutral conditions implies that the ratio may increase further with further decreases in stability. Rather than extrapolate far beyond the available observations, we chose a ratio of above-canopy to surface σw of 5.0 for unstable conditions, constructing the final of the four profiles using this assumption:
This last assumption may result in an underestimate of the ‘trapping’ of pollutants in unstable environments if the relative ratio in above-canopy to surface σw values is >5.0. Additional observations under unstable conditions are needed to improve this version of our parameterization further. Also, the intent of the profiles is to create the shape of the profile of diffusivity with the assumption that the diffusivity at the resolution of the driving meteorological model is correct. From the spread of observed σw values23,42, further refinements based on more specific types of vegetation are possible.
For both implementations of , the values of friction velocity from the driving meteorological model, the canopy height, and equations (3) through (5), (GEM-MACHv2) or equations (3, 4) and (6, 7, 8, 9) (GEM-MACHv2.1) are used to create an estimate of the vertical diffusivity at the driving meteorological model’s first layer above the ground . The ratio of the driving meteorological model’s vertical diffusivity at this height (Kmod(z1)) to the estimate is used to scale vertical diffusivities downward through the canopy from height z1, using equations (2) through (9). In both implementations, the equations thus ensure that the scaled ‘shape’ of the canopy profile is in accord with observations across multiple types of vegetated canopies23, and, for GEM-MACHv2.1, attempt to account for canopy-specific changes in atmospheric stability59. The subsequent scaling of the resulting profile to meet the diffusivity of the driving meteorological model at height z1 thus allows an approximation to the diffusivity within the canopy based on the available observations of σw, while taking into account differences associated with changes in canopy height, friction velocity and the response of canopy turbulence to atmospheric stability.
As noted above, the meteorological model’s predicted stability influences its predicted diffusivity coefficients. These diffusivity coefficients are used to normalize the derived diffusivity profile within the parameterized canopy layers via equation (2). The impact of large-scale stability is thus incorporated into the parameterized diffusivities within the canopy. The second variation on the parameterization, described in equations (6) through (9), attempts to account for the additional influence of stability on the profile of the variance in Eulerian vertical velocity within the canopy itself55. For this second variation, we note that few if any observations of σw aggregated for highly unstable conditions exist; our ‘unstable’ profile is thus similar to the neutral profile, with the bulk of the changes associated with unstable conditions being the result of the resolved scale meteorology’s diffusivity values. Further observational evidence is needed to improve the method for highly unstable conditions.
It should be noted here that our two approaches for estimating σw are not a result of Monin–Obukhov theory. Numerous authors60,61,62,63,64 have shown that Monin–Obukhov theory does not adequately represent canopy turbulence. Instead, we use fits to observed σw profiles and the relationship24 to infer the shape of the profile, which is then normalized to allow a smooth transition to resolved model layer K values above the canopy.
Other approaches have been put forward for estimating canopy transport in the context of equilibrium solutions for the velocity profile, specifically above an inferred displacement height65, with a review of these methods appearing in the literature66. These approaches compare well to observations above the inferred displacement height, although they are not applicable to the region within the canopy below that displacement height. Nevertheless, they represent another avenue for future improvements to canopy processes. The dependence of canopy turbulence on LAI has also been examined in the literature67. When sufficient observation information on specific canopies is available to allow characterization of this methodology’s free parameters, this approach has been shown to provide a good fit to observed canopy turbulence, although performance is degraded in cases of insufficient observation accuracy and for complex canopies. Nevertheless, we feel that this approach and the incorporation of LAI into canopy turbulence parameterizations should be pursued in future work, in conjunction with the collection of additional measurement data for parameterization evaluation.
Efforts to describe forest turbulence processes have also taken place making use of LES models, where the effects of the forest on the momentum equation are included as a leaf area density-dependent drag term, for very high-resolution domains. Grid cells sizes typically on the order of meters, and very small computational time-steps, prohibit the use of these models as parameterizations within a regional chemical transport model, but they are useful tools for generating potential parameterizations. For example, modifications68 to an existing LES model69, where drag imposed by a forest canopy was added to the momentum balance equation, was used to simulate multiple layers within the plant canopy. While the resulting model compared well to past Borden measurements70 no attempt was made to create a parameterization of the results in a manner suitable for incorporation into regional chemical transport models, unlike past LES efforts for the convective boundary layer71. More recently, a LES model for contiguous forest canopies72 was used to demonstrate the ability of such models to simulate coherent turbulent structures similar to those seen in observational studies (though no direct comparisons to observations were made). The potential for significant edge effects along forest edges was also demonstrated26 using a LES model, with simulated flow features similar to those seen from observations, although no formal evaluation against observations was carried out. LES models to date have not been used to create forest mixing parameterizations which would be suitable for the coarse time and spatial resolutions of regional chemical transport models. However, they do have the capability to simulate counter-gradient diffusion within forest canopies, an observed process which cannot be simulated with the current down-gradient diffusion approach used here. A potential future direction for this work is thus the use of LES models to create improved parameterizations for canopy turbulence at regional chemical transport model resolution.
Splitting of the model core
The subroutines handling GEM-MACH’s gas, aqueous and particle chemistry, vertical diffusion, emission, deposition and particle microphysics are solved sequentially using operator splitting44 on vertical slices within horizontal tiles of the model domain (the tiles being distributed across groups of processors using the message passing interface (MPI) paradigm, and for individual slices within each tile using the OpenMP paradigm). Once canopy versus no-canopy grid cells are identified and the additional vertical layers added to the canopy-containing model columns, all of the subsequent model integration processes aside from advection were also applied independently to ‘canopy’ and ‘no canopy’ columns for each model time step, for each of the model operators within GEM-MACH’s model core.
One disadvantage of the canopy parameterization is that it introduces an additional set of model layers which are spatially discontinuous in the horizontal dimension. The advection processes of the model, however, require a continuous, regular grid. For this reason, advection is carried out on the original model layers. At the end of the each time step of the chemistry processes outlined above, the relative contributions of the mass of each tracer towards the original model layer mass are stored during the process of reassigning model layer mass to original model layers. These model ratios are used to redistribute the mass from the advected model layers back to the canopy layers at the start of the subsequent time step. This is an approximation necessitated by the nature of the advection solver, but also justified by observations and theoretical development23 which show that vertical transport within the canopy is dominated by turbulence rather than advection. The vertical distribution of mass within canopy layers will thus be controlled by chemistry and vertical diffusion, and will not be significantly modified relative to these terms by advection.
Conversion of satellite data to gridded model input
The parameterization makes use of satellite retrievals of canopy height and LAI as input parameters. The canopy height data46 were originally available as 1 km resolution pixels; these were aggregated to the 10 km resolution of GEM-MACH by calculating the average of the 1 km resolution canopy heights enclosed by each model 10 km resolution grid cell. Total vertically integrated LAI values were derived from the MODerate Resolution Imaging Spectrometers (MODIS) on the NASA Terra and Aqua satellites58,73. These archived MODIS LAI values were derived from surface reflectance observations in the red and near-infrared combined with other input information and look-up tables calculated using radiative transfer models. Here, we used archived 8-day MODIS Terra/Aqua composites for July 2010 at 1 km resolution (product code MCD15A2, Collection Five74). The 1-km resolution satellite pixel values spanning July 2010 were aggregated to monthly totals on the GEM-MACH 10 km continental grid.
Statistical metrics used for evaluation
Fraction of predictions within a factor of 2: the relative fraction of model values that fall within a factor of two of the observed value (1.0 for a perfect model).
This is the average of the difference (model—observation) for all data pairs; negative numbers indicate that the model values on average are lower than observations, positive values indicate that the model values on average are higher than observations (0.0 for a perfect model). Mean bias values are in the units of the observed variable.
Mean Gross Error (also known as the Mean Absolute Error)
The average magnitude of the difference between model and observations (0.0 for a perfect model). Mean gross error values are in the units of the observed variable.
Root Mean Square Error
The s.d. of the differences between the model and observed values. The RMSE is a measure of model accuracy (0.0 for a perfect model, units same as the variable being evaluated).
Pearson Correlation Coefficient
A measure of the degree of linear dependence between two variables; a perfect linear relationship between observations and model values will have a positive slope and a correlation coefficient of +1.0. In the following formula, σM and σO are the model and observed standard deviations, respectively.
Coefficient of Efficiency
This measure allows a comparison of the magnitude of the difference between model and observed values relative to the magnitude of the difference between the observed values and the observed mean. A perfect model will have a score of 1.0, while a score of 0.0 indicates that the mean of the observed data is as accurate a predictor as the model values (no time-dependent predictive advantage of the model).
Index of Agreement
This measure compares the magnitude of the difference between model and observed values relative to the difference between the observations and the observed mean (that is, the sum of the error magnitudes relative to the deviation of the observations from their mean). A perfect model would have a score of +1.0.
The square of the difference in the spread of the variables from their mean value12:
The degree of correlation between the modelled and observed time series12:
The data that support the findings of this study are available from the corresponding author upon request.
How to cite this article: Makar, P. A. et al. The effects of forest canopy shading and turbulence on boundary layer ozone. Nat. Commun. 8, 15243 doi: 10.1038/ncomms15243 (2017).
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Guenther, A. B. et al. The Model of Emissions of Gases and Aerosols from Nature version 2.1 (MEGAN2.1): an extended and updated framework for modeling biogenic emissions. Geosci. Model Dev. 5, 1471–1492 (2012).
Guenther, A. B. et al. Natural emissions of non-methane volatile organic compounds, carbon monoxide, and oxides of nitrogen from North America. Atmos. Environ. 34, 2205–2230 (2000).
Zhang, L., Brook, J. R. & Vet, R. A revised parameterization for gaseous dry deposition in air-quality models. Atmos. Chem. Phys. 3, 2067–2082 (2003).
Baldocchi, D. D., Hicks, B. B. & Camara, P. A canopy stomatal resistance model for gaseous deposition to vegetated surfaces. Atmos. Environ. 21, 91–101 (1987).
Chai, T. et al. Evaluation of the United States national air quality forecast capability experimental real-time predictions in 2010 using air quality system ozone and NO2 measurements. Geosci. Model Dev. 6, 1831–1850 (2013).
Makar, P. A. et al. Feedbacks between air pollution and weather, part 2: effects on chemistry. Atmos. Environ. 115, 499–526 (2015).
Im, U. et al. Evaluation of operational on-line-coupled regional air quality models over Europe and North America in the context of AQMEII phase 2. Part I: Ozone. Atmos. Environ. 115, 404–420 (2015).
Im, U. et al. Evaluation of operational on-line-coupled regional air quality models over Europe and North America in the context of AQMEII phase 2. Part II: particulate Matter. Atmos. Environ. 115, 421–411 (2015).
Canada-US Air Quality Agreement–Ozone Annex (2000); Available at: https://www.ec.gc.ca/air/default.asp?lang=En&n=FA26FE79-1 (2012).
van Zelm, R. et al. European characterization factors for human health damage of PM10 and ozone in life cycle impact assessment. Atmos. Environ. 42, 441–453 (2008).
Avnery, S., Mauzerall, D. L., Liu, J. & Horowitz, L. W. Global crop yield reductions due to surface ozone exposure: 2. Year 2030 potential crop production losses and economic damage under two scenarios of O3 pollution. Atmos. Environ. 45, 2297–2309 (2011).
Solazzo, E. & Galmarini, S. Error apportionment for atmospheric chemistry-transport models. A new approach to model evaluation. Atmos. Chem. Phys. 16, 6263–6283 (2016).
Moran, M. D. et al. in Air Pollution Modelling and Its Application XX (eds Steyn, D. G., Rao, S. T.) 289-292 (Springer, 2010).
Solazzo, E. et al. Model evaluation and ensemble modelling of surface-level ozone in Europe and North America in the context of AQMEII. Atmos. Environ. 53, 60–74 (2012).
Fiore, A. M. et al. Multi-model estimates of intercontinental source-receptor relationships for ozone pollution. J. Geophys. Res. 114, D04301 (2009).
Hogrefe, C. et al. An analysis of long-term regional-scale ozone simulations over the Northeastern United States: variability and trends. Atmos. Chem. Phys. 11, 567–582 (2011).
Andreae, M. O. et al. The Amazon Tall Tower Observatory (ATTO): overview of pilot measurements on ecosystem ecology, meteorology, trace gases, and aerosols. Atmos. Chem. Phys. 15, 10723–10776 (2015).
Zhang, J. & Rao, S. T. The role of vertical mixing in the temporal evolution of ground-level ozone concentrations. J. App. Met. 38, 1674–1691 (1999).
Wu, Z., Staebler, R., Vet, R. & Zhang, L. Dry deposition of O3 and SO2 estimated from gradient measurements above a temperate mixed forest. Environ. Poll. 210, 202–210 (2016).
Burkholder, J. B. et al. Chemical Kinetics and Photochemical Data for Use in Atmospheric Studies, Evaluation No. 18., JPL Publication 15-10 Jet Propulsion Laboratory (2015).
Nilson, T. A theoretical analysis of the frequency of gaps in plant stands. Agric. Meterol. 8, 25–38 (1971).
Monsi, M. & Saeki, T. Über den Lichtfaktor in den Pflanzengesellschaften und seine Bedeutung für die Stoffproduktion. Jpn J. Bot. 14, 22–52 (1953).
Patton, E. G., Sullivan, P. P. & Davis, K. J. The influence of a forest canopy on top-down and bottom-up diffusion in the planetary boundary layer. Q. J. R. Meteorol. Soc. 129, 1415–1434 (2003).
Raupach, M. R. A practical Lagrangian method for relating scalar concentrations to source distributions in vegetation canopies. Q. J. R. Meteorol. Soc. 115, 609–632 (1989).
Queck, R. et al. TurbEFA: an interdisciplinary effort to investigate the turbulent flow across a forest clearing. Meteorol. Z. 23, 637–659 (2014).
Kanani-Suhring, F. & Raasch, S. Spatial variability of scalar concentrations and fluxes downstream of a clearing-to-forest transition: a Large-Eddy Simulation study. Boundary-Layer Meteorol. 155, 1–27 (2015).
Parrington, M. et al. Impact of the assimilation of ozone from the tropospheric emission spectrometer on surface ozone across North America. Geophys. Res. Lett. 36, L04802 (2009).
Vautard, R., Honore, C., Beekmann, M. & Rouil, L. Simulation of ozone during the August 2003 heat wave and emission control scenarios. Atmos. Environ. 39, 2957–2967 (2005).
Kelly, J., Makar, P. A. & Plummer, D. A. Projections of mid-century summer air-quality for North America: effects of changes in climate and precursor emissions. Atmos. Chem., Phys. 12, 5367–5390 (2012).
Dentener, F. et al. The impact of air pollutant and methane emission controls on tropospheric ozone and radiative forcing: CTM calculations for the period 1990–2030. Atmos. Chem. Phys. 5, 1731–1755 (2005).
Wu, S. et al. Effects of 2000-2050 global change on ozone air quality in the United States. J. Geophys. Res. 113, D06302 (2008).
Van Dingenen, R. et al. The global impact of ozone on agricultural crop yields under current and future air quality legislation. Atmos. Environ. 43, 604–618 (2009).
Mauzerall, D. L., Sultan, B., Kim, N. & Bradford, D. F. NOx emissions from large point sources: variability in ozone production, resulting health damages and economic losses. Atmos. Environ. 39, 2851–2866 (2005).
Frost, G. J. et al. Effects of changing power plant NOx emissions on ozone in the eastern United States: proof of concept. J. Geophys. Res. 111, D12306 (2006).
Carslaw, D. & Ropkins, K. openair–An R package for air quality data analysis. Env. Mod. Soft 27–28, 52–61 (2012).
Makar, P. A., Fuentes, J. D., Wang, D., Staebler, R. M. & Wiebe, H. A. Chemical processing of biogenic hydrocarbons within and above a temperate deciduous forest. J. Geophys. Res. 104, 3581–3603 (1999).
Stroud, C. et al. Role of canopy-scale photochemistry in modifying biogenic-atmospheric exchange of reactive terpene species: Results from the CELTIC field study. J. Geophys. Res. 110, D17303 (2005).
Gordon, M. et al. Uptake and emission of VOCs near ground level below a mixed forest at Borden, Ontario. Atmos. Chem. Phys. 14, 9087–9097 (2014).
Ashworth, K. et al. FORest Canopy Atmospheric Transfer (FORCAsT) 1.0: a 1-D model of biosphere-atmosphere chemical exchange. Geosci. Model Dev. 8, 3765–3784 (2015).
Finnigan, J. Turbulence in plant canopies. Annu. Rev. Fluid Mech. 32, 519–571 (2000).
Makar, P. A. et al. Regional chemical transport modelling with a forest canopy simulation. in Air Pollution Modeling and its Application XXV (eds Mensink, C. & Kallos, G.) (Springer; in the press).
Raupach, M. R., Finnigan, J. J. & Brunet, Y. Coherent eddies and turbulence in vegetation canopies. Boundary-Layer Meteorol. 78, 351–382 (1996).
Froelich, N., Croft, H., Chen, J. M., Gonsamo, A. & Staebler, R. M. Trends of carbon fluxes and climate over a mixed temperate-boreal transition forest in Southern Ontario, Canada. Agric. Forest Meteorol. 211, 72–84 (2015).
Marchuk, G. I. Methods of Numerical Mathematics 2nd edn Springer-Verlag (1982).
Makar, P. A. et al. Anthropogenic heat flux, urban properties, and regional weather. Atmos. Environ. 40, 2750–2766 (2006).
Simard, M., Pinto, N., Fisher, J. B. & Baccini, A. Mapping forest canopy height globally with spaceborne lidar. J. Geophys. Res. Biogeosci. 116, G04021 (2011).
Meyers, T. P. The sensitivity of modeled SO2 fluxes and profiles to stomatal and boundary layer resistances. Water Air Soil Pollut. 35, 261–278 (1987).
Zhao, F. et al. Measuring effective leaf area index, foliage profile, and stand height in New England forest stands using a full-waveform ground-based lidar. Remote Sens. Environ. 115, 2954–2964 (2011).
Zhao, F. et al. A comparison of foliage profiles in the Sierra National Forest obtained with a full-waveform under-canopy EVI lidar system with the foliage profiles obtained with an airborne full-waveform LVIS lidar system. Remote Sens. Environ. 136, 330–341 (2013).
Parker, G. G., O’Neill, J. P. & Higman, D. Vertical profile and canopy organization in a mixed deciduous forest. Vegetatio 85, 1–11 (1989).
Pierce, T. et al. Influence of increased isoprene emissions on regional ozone modeling. J. Geophys. Res. 103, 25611–25629 (1998).
Chen, J. M., Menges, C. H. & LeBlanc, S. G. Global mapping of foliage clumping index using multi-angular satellite data. Remote Sens. Environ. 97, 447–457 (2005).
Pisek, J. et al. Intercomparison of clumping index estimates from POLDER, MODIS, and MISR satellite data over reference sites. ISPRS J. Photgramm. Remote Sens. 101, 47–56 (2015).
Leblanc, S. G. et al. Canada-wide foliage clumping index mapping from multiangular POLDER measurements. Can. J. Remote Sens. 31, 364–376 (2005).
He, L. et al. Inter- and intra-annual variations of clumping index derived from the MODIS BRDF product. Int. J. Appl. Earth Obs. Geoinf. 44, 53–60 (2016).
Pisek, J., Chen, J. M. & Nilson, T. Estimation of vegetation clumping index using MODIS BRDF data. Int. J. Remote Sens. 32, 2645–2657 (2011).
Kucharik, C. J., Norman, J. M. & Gower, S. T. Characterization of radiation regimes in nonrandom forest canopies: theory, measurements, and a simplified modeling approach. Tree Phys. 19, 695–706 (1999).
Justice, C. O. et al. An overview of MODIS land data processing and product status. Remote Sens. Environ. 83, 3–15 (2002).
Shaw, R. H., den Hartog, G. & Neumann, H. H. Influence of foliar density and thermal stability on profiles of Reynolds stress and turbulence intensity in a deciduous forest. Boundary-Layer Meteorol. 45, 391–409 (1988).
Garratt, J. R. Transfer characteristics for a heterogeneous surface of large aerodynamic roughness. Quart. J. R. Meteorol. Soc. 104, 491–502 (1978).
Raupach, M. R. Anomalies in flux-gradient relationships over forest. Boundary-Layer Meteorol. 16, 467–486 (1979).
Denmead, O. T. & Bradley, E. F. in The Forest-Atmosphere Interaction (eds Hutchinson, B. A. and Hicks, B. B.) 421–442 (D. Reidel Publishing Co, 1985).
Denmead, O. T. & Bradley, E. F. On scalar transport in plant canopies. Irrig. Sci. 8, 131–149 (1987).
Cellier, P. & Brunet, Y. Flux-gradient relationships above tall plant canopies. Agric. Forest Meteorol. 58, 93–117 (1992).
Harman, I. N. & Finnigan, J. J. A simple unified theory for flow in the canopy and roughness layer. Boundary-Layer Meteorol. 123, 339–363 (2007).
Weligepolage, K., Gieske, A. S. M., van der Tol, C., Timmermans, J. & Su, Z. Effect of sub-layer corrections on the roughness parameterization of a Douglas fir forest. Agric. Forest Meteorol. 162–163, 115–126 (2012).
Massman, W. J. & Weil, J. C. An analytical one-dimensional second-order closure model of turbulence statistics and the Lagrangian time scale within and above plant canopies of arbitrary structure. Boundary-Layer Meteorol. 91, 81–107 (1999).
Patton, E. G. Large-Eddy Simulation of Turbulent Flow Above and Within a Plant Canopy. PhD dissertation, Univ. California (1991).
Moeng, C.-H. & Sullivan, P. A comparison of shear and buoyant driven planetary boundary layer flows. J. Atmos. Sci. 51, 999–1022 (1994).
Gao, W., Shaw, R. H. & Paw, U. K. T. Observation of organized structure in turbulent flow within and above a forest canopy. Boundary-Layer Meteorol. 47, 349–377 (1989).
Holtslag, A. A. M. & Moeng, C.-H. Eddy diffusivity and countergradient transport in the convective atmospheric boundary layer. J. Atmos. Sci. 48, 1690–1698 (1991).
Watanabe, T. Large-eddy simulation of coherent turbulence structures associated with scalar ramps over plant canopies. Boundary-Layer Meteorol. 112, 307–341 (2004).
Yang, W. et al. Analysis of leaf area index products from combination of MODIS Terra and Aqua data. Rem. Sens. Environ 104, 297–312 (2006).
NASA LP DAAC, Leaf area index–fraction of photosynthetically active radiation 8-day L4 Global 1km. Available at: https://lpdaac.usgs.gov/dataset_discovery/modis/modis_products_table/mcd15a2 (2014).
We acknowledge the work of colleagues M.D. Moran, S. Gravel and V. Savic-Jovcic, for leading the operational implementation of version 2 of GEM-MACH.
The authors declare no competing financial interests.
Canopy parameters by BELD3 land use categories. (XLSX 18 kb)
Leaf Area Index and cumulative Leaf Area Index by LAI distribution type. (XLSX 10 kb)
Three-dimensional contouring animation of the reduction in ozone resulting from the use of the forest canopy parameterization, with concentration reduction factors of 0.95, 0.80 and 0.50. (AVI 28291 kb)
About this article
Cite this article
Makar, P., Staebler, R., Akingunola, A. et al. The effects of forest canopy shading and turbulence on boundary layer ozone. Nat Commun 8, 15243 (2017). https://doi.org/10.1038/ncomms15243