Abstract
For decades it has been debated whether the conversion of synthesis gas to methanol over copper catalysts is sensitive or insensitive to the structure of the copper surface. Here we have systematically investigated the effect of the copper particle size in the range where changes in surface structure occur, that is, below 10 nm, for catalysts with and without zinc promotor at industrially relevant conditions for methanol synthesis. Regardless of the presence or absence of a zinc promotor in the form of zinc oxide or zinc silicate, the surface-specific activity decreases significantly for copper particles smaller than 8 nm, thus revealing structure sensitivity. In view of recent theoretical studies we propose that the methanol synthesis reaction takes place at copper surface sites with a unique configuration of atoms such as step-edge sites, which smaller particles cannot accommodate.
Similar content being viewed by others
Introduction
Supported metal catalysts play a pivotal role in the production of fuels and chemicals, in the purification of exhaust gases and in electrochemical energy conversion systems1,2,3,4,5,6. Surface science and computational chemistry have shown that the adsorption and catalytic properties of these materials depend on the surface structure of the metal7,8,9,10,11,12,13,14. According to current insights, the adsorption of reactants, intermediates, transition states and products at step-edge surface sites results in decreased energy barriers for dissociation reactions and for reactions involving a transition state with a specific geometry10,11,12,13. For σ-bond association reactions the energy barrier is often insensitive to the structure of the metal surface as intermediates and the transition state can be similarly stabilized on terrace sites or step-edge sites10,11,12,13,15. Nanosizing metal particles to a size below 10 nm typically alters the surface structure by changing the fraction of surface atoms that constitute different adsorption sites, while nanosizing metals with a significant d-valence electron density at the Fermi level to a size below 2 nm typically also alters the local density of states for a specific surface site12,16,17,18. In line with the current understanding, the effect of the metal particle size in the range between 2 and 10 nm on the activity and selectivity has been found to be strong for dissociation reactions or reactions involving the cleavage or formation of π-bonds, such as in methanation, Fischer–Tropsch synthesis and ammonia synthesis, but weak or absent for hydrogenation reactions that involve σ-bonds5,6,7,8,9,10,11,12,13,15.
For decades, it has been debated whether the hydrogenation of CO and CO2 to methanol by copper catalysts is sensitive or insensitive to the structure of the copper surface19. Several studies found a linear relationship between the exposed copper surface area determined with N2O refractive frontal chromatography and the activity, suggesting a structure-insensitive reaction20,21,22,23,24. On the basis of the measured copper surface areas reported in these studies, the particles were estimated to be larger than 10 nm. Recent studies have shown that N2O is not just oxidizing the copper surface but also oxidizing (partly) reduced zinc species on metallic copper or oxygen vacancies in the zinc oxide support25,26,27. The N2O refractive frontal chromatography method therefore depends on the structure of the investigated catalyst and the conditions before N2O exposure, and this might result in differences between the measured and the real exposed copper surface areas. In contrast to the structure insensitivity observed before, recent studies suggested that the methanol synthesis reaction might be sensitive to the copper surface structure27,28,29,30. Furthermore, it has been shown that the activity of copper also depends on the presence of zinc, be it in the form of zinc oxide or zinc silicate22,23,24,28,29,31,32.
To settle this long-standing debate on the structure sensitivity of copper catalysts for the methanol synthesis reaction, we examined the catalytic performance of supported catalysts with different copper particle sizes and with or without a zinc component. More specifically, we have synthesized 42 catalysts with copper particle sizes in the range from 2 to 15 nm on Zn-free supports (silica and carbon), on supports containing zinc as Zn silicate or on supports incorporating Zn oxide. Furthermore, we have synthesized series of catalysts with similar copper particle sizes and various zinc loadings, to determine the minimum amount of zinc required to achieve optimum activity. As it has been shown that chemisorption techniques determining the copper surface area are sensitive to the catalyst structure and the preconditions, and in view of a presumably fast equilibration of the surface composition of especially the smallest particles (<8 nm) in response to changes in the thermodynamic potential of the gas phase, we have chosen to investigate the structure sensitivity of the methanol synthesis reaction by relying on X-ray diffraction and (scanning) transmission electron microscopy ((S)TEM) to determine the size and geometric surface area of the copper particles. The performance of all catalysts is investigated in the methanol synthesis reaction under industrially relevant reaction conditions of 260 °C and 40 bar, using a synthesis gas feedstock containing 23% CO, 7% CO2, 60% H2 and 10% Ar.
Catalysts containing zinc oxide are about 10 times more active and catalysts containing zinc silicate are about 5 times more active in the methanol synthesis reaction than catalysts without zinc. The differences in activity are ascribed to the promoting effect of zinc, which is affected by the thermodynamic stability of the zinc phase. The turnover frequency (TOF) decreases by a factor of about 3 going from 8 to 2 nm copper particles for both Cu and CuZn catalysts. Hereby, this work shows unequivocally that the methanol synthesis at industrially relevant conditions is sensitive to the copper surface structure. In view of recent theoretical studies, the observed effect of the copper particle size on the activity indicates that the methanol synthesis reaction predominantly takes place at surface sites with a unique configuration of several copper atoms such as step-edge sites, which smaller particles cannot accommodate.
Results
Copper particle size
Cu(Zn)/SiO2 catalysts were synthesized on different silica supports via a heat treatment of impregnated copper nitrate in N2 or 2% NO/N2 resulting in copper oxide and subsequent reduction in H2 gas atmosphere resulting in metallic copper. The CuO and Cu particle sizes based on X-ray diffraction and (S)TEM measurements for the different samples were in the range from 2 to 15 nm. Representative TEM images and copper particle size distributions are shown in Fig. 1 while full details for all samples are collected in the Supplementary Information including the identification in the (S)TEM images of the copper particles in catalysts containing zinc (Supplementary Figs 1–18, Supplementary Tables 1–6 and Supplementary Methods). Similar crystallite sizes were found for copper oxide after heat treatment and for metallic copper after reduction and passivation, as the change in particle size on reduction is <15% based on the difference in density for the two phases (see Supplementary Table 1 for the actual Cu and CuO sizes as determined with X-ray diffraction and (S)TEM). Particle size distributions determined with (S)TEM after heat treatment were therefore representative for the size distribution of the copper particles after reduction. In the case of heat treatment in N2 and reduction in H2, the copper particles obtained a size of about 2–3 nm, irrespective of the support porosity and the presence or absence of zinc31,33,34. For these catalysts, the particle size measurements were based only on (S)TEM since the crystallite sizes were below the detection limit of X-ray diffraction. In the case of heat treatment in 2% NO/N2 and subsequent reduction in H2, the size of the copper particles, as determined by (S)TEM and X-ray diffraction, ranged from 3 to 15 nm and depended on the support porosity and copper loading35,36.
The scale bars correspond to 20 nm. Number-average particle size (Cun), surface-average particle size (Cus) and s.d. of the number-averaged particle size (σn) are included in the figure. (a) Approximately 2.4 nm copper particles on silica after heat treatment in N2 and reduction in H2 (Cu2S-N2). (b) Approximately 5.4 nm copper particles on high-surface-area graphite after reduction (Cu9HSAG). (c) Approximately 8.0 nm copper particles on silica prepared via homogeneous deposition precipitation followed by a hydrothermal treatment and reduction in H2 (Cu40SiO2). (d) Approximately 14.2 nm copper particles on silica after heat treatment in 2% NO/N2 and reduction in H2 (Cu6SG(15)-NO). The TEM images in b and d were acquired with a Tecnai 12 microscope and in a and c with an image-aberration corrected Titan microscope.
Cu(Zn)/C catalysts were synthesized on high-surface area graphite (HSAG) or carbon xerogels with different pore sizes via a drying step and a reduction in H2 (Supplementary Table 2). The size of the copper particles as determined with TEM was between 5 and 11 nm, and correlated to the average pore size of the support. For the series of catalysts on HSAG with varying Zn loading, the copper particle size as determined with TEM varied from 5–6 nm for the sample without zinc to about 9 nm for the sample impregnated with a solution containing 2 M copper nitrate and up to 2 M zinc nitrate.
Cu/ZnO(/Al2O3) catalysts were synthesized via co-precipitation, followed by drying, calcination and reduction. The size of the resulting copper particles, as determined with TEM, increased from 5–6 nm for the samples with a low copper loading (<10 wt%) to more than 30 nm for the samples with high copper loadings (>85 wt%, Supplementary Table 3). The Cu/ZnO samples with a copper loading close to that of commercial methanol synthesis catalysts (∼55 wt%) had a copper particle size of about 12 nm. For the sample containing, in addition to copper and zinc, 11.6 wt% alumina, the copper particle size was ∼7 nm, which is the typical size of the copper particles in commercial methanol synthesis catalysts19,37. Metallic copper crystallite sizes determined with X-ray diffraction were similar to the particle sizes determined with (S)TEM indicating that the particles were mono-crystalline. High-resolution TEM images (Fig. 2 and Supplementary Fig. 15) of copper catalysts under a reducing gas atmosphere showed mono-crystalline particles with the lattice spacing of metallic copper.
The scale bar corresponds to 5 nm. The image on the top right shows the fast Fourier transform of the TEM image. The imaged copper particle is mono-crystalline. The distance between the observed lattice fringes is 2.09 Å, which corresponds to the (111) interplanar spacing of metallic copper crystals.
Zinc species
Depending on the catalyst formulation and the synthesis procedure, different zinc species can exist after reduction before catalysis. X-ray diffraction on CuZn/SiO2 after reduction revealed the absence of crystalline ZnO in the sample (Fig. 3, red). This is in agreement with previous results from X-ray absorption spectroscopy that co-impregnation of copper and zinc led to the incorporation of zinc in the silica support resulting in zinc hydroxy(phyllo)silicate31, which is more stable than ZnO and SiO2 separately38. For the CuZn/SiO2 samples after heat treatment in N2 or 2% NO/N2, zinc was thus most likely present in the form of zinc hydroxy(phyllo)silicate, which we refer to in this paper as zinc silicate. Similarly, X-ray diffraction of the CuZn/C samples after reduction did not show the presence of any crystalline zinc species (Fig. 3, blue). However, after 10 days of methanol synthesis, X-ray diffractions corresponding to ZnO were detected for samples with a Zn/(Cu+Zn) atomic ratio higher than 0.1 (Fig. 3, green). Hence, for carbon-supported catalysts, the Zn promoter was present as highly dispersed, amorphous ZnO before catalysis, which crystallized after prolonged exposure to reaction conditions. X-ray diffraction of Cu/ZnO(/Al2O3) samples after reduction showed the presence of crystalline ZnO with crystallite sizes around 12 nm (for Cu/ZnO see Fig. 3, black).
X-ray diffractograms of Cu/ZnO (Cu54Zn after reduction, black), CuZn/SiO2 (Cu8ZnSG(11)-NO after reduction, red) and CuZn/C before (Cu8Zn8.0HSAG after reduction, blue) and after methanol synthesis (Cu8Zn8.0HSAG after catalysis, green) are shown. Diffraction peak positions relating to Cu and ZnO are marked with filled circles and triangles, respectively. The broad peak at 2θ=25° for the CuZn/SiO2 sample is due to the silica support and the peaks at 31° for the CuZn/C and CuZnO samples are due to the carbon support and the graphite lubricant used for pelletization, respectively.
Element distribution
To determine the spatial distribution of copper and zinc in the different types of catalysts, STEM-energy dispersive X-ray spectroscopy (STEM-EDX) was used. In the case of CuZn/SiO2 after heat treatment in 2% NO/N2 and reduction in H2, zinc was located throughout the support with an increased loading near high-density domains of copper particles (Supplementary Fig. 9)31. In the case of reduced and passivated CuZn/C, both copper nanoparticles and zinc species were found in close intimacy, showing local Cu/Zn ratios close to the bulk Cu/Zn ratios (Supplementary Figs 10 and 11). For reduced and passivated Cu/ZnO(/Al2O3) samples, STEM-EDX showed that particles with a high copper content were located next to particles with a high zinc content (Supplementary Figs 12–14). For all three different types of catalysts, zinc was thus detected in close proximity to the copper particles.
Effect of zinc on activity
The activity and selectivity in the methanol synthesis reaction of the different catalysts were investigated at 40 bar (23% CO, 7% CO2, 60% H2 and 10% Ar), 260 °C and CO+CO2 conversions below 20%, that is, below the thermodynamic conversion limit of 28.5%. The selectivity towards methanol was above 98.5% for all catalysts. The methanol synthesis productivity was calculated from the conversion of CO+CO2 (Supplementary Methods). TOFs were calculated per surface metal atom and the dispersion was based on (S)TEM particle size distributions assuming fully accessible spherical copper particles. No correlation between silica support pore size and TOF was observed for samples with similar copper particle sizes, indicating that the copper particles were similarly accessible for methanol synthesis irrespective of the support porosity (Supplementary Fig. 18).
Copper catalysts without Zn and a copper particle size larger than 8 nm had a maximum TOF after 2–10 h on stream of about 2.5 ·10−3 s−1, in close accordance with previously reported values for copper on silica under similar conditions (Supplementary Table 1; see Supplementary Fig. 16 for typical activity plots as a function of time on stream)21,22,23. Catalysts containing Cu particles and zinc hydroxy(phyllo)silicate (Cu/Zn-silicate) were about 5 times more active while catalysts containing Cu/ZnO were about 10 times more active than Cu catalysts (Supplementary Tables 2 and 3). The TOF for copper particles larger than 8 nm promoted by ZnO was about 2.5 ·10−2 s−1, in reasonable agreement to values previously reported in literature21,22,28,39.
The catalytic performance of the CuZn/HSAG catalysts with similar copper particle sizes but varying amounts of ZnO is shown in Fig. 4. The activity increased on increasing zinc loading until the maximum activity was reached at a Zn/(Cu+Zn) atomic ratio of 0.05. A further increase in zinc loading did not change the activity significantly. For Cu/ZnO samples the amount of zinc oxide required to obtain maximum site-specific activity corresponds to a Zn/(Cu+Zn) atomic ratio of about 0.1 (Supplementary Fig. 17), similar to previous reports40,41. Since the zinc-containing catalysts used to study the effect of the copper particle size all have a zinc loading substantially higher and STEM-EDX showed for the different types of catalysts that zinc was located in close proximity to the copper particles, it is concluded that the promotion by zinc was not limited by the zinc loading for those catalysts. The observed promotion effect for zinc-containing catalysts thus seems to be inherent to the nature and related thermodynamic stability of the zinc phase, that is, the thermodynamically less stable ZnO has a stronger promoting effect than the more stable zinc silicate38.
Many mechanistic models have been proposed in literature to explain the role of zinc, including hydrogen spillover from zinc oxide to copper42, the stabilization of either Cu+ or Cu− species43,44, shape changes of the Cu nanoparticles on zinc oxide supports45 and zinc-induced defects in the copper structure28,40. Recent work indicates that the increase in TOF for zinc-containing catalysts is mainly due to the formation of (partially) reduced zinc species from zinc oxide or zinc hydroxy(phyllo)silicate and subsequent migration to the copper surface, increasing the copper surface-specific activity26,28,29,46,47,48,49. Since this process is affected by the thermodynamic stability of the zinc phases involved, we conclude that for the catalysts containing Zn-silicate the equilibrium amount of zinc species migrated on the surface of the Cu nanoparticles is lower than for samples containing ZnO, which led to a stronger zinc promotion effect for the latter samples.
Effect of copper particle size on activity
For all three types of catalysts the TOF decreased for copper particle sizes below about 8 nm (Fig. 5). Within the uncertainty, a decrease of the TOF by a factor of about 3 is apparent going from particles of 8 to 2 nm for catalysts containing Cu, Cu/Zn-silicate and Cu/ZnO although the data for the latter do not allow a quantitative conclusion concerning the effect of the particle size below 5 nm. To obtain highly active copper-based methanol synthesis catalysts it is thus most important to promote catalysts with zinc as it can increase the activity by a factor of 10, but it is also important to tune the copper particle size as it can further increase the activity by a factor of 3.
The surface-specific activity (TOF) for methanol synthesis after 2–10 h on stream at 260 °C and 40 bar plotted as a function of the number-averaged copper particle size for catalysts containing copper, that is, Cu/SiO2, Cu/(functionalized)SiO2 and Cu/C (red), containing Cu/Zn-silicate, that is, CuZn/SiO2 (green), and containing Cu/ZnO, that is, Cu/ZnO(/Al2O3) and CuZn/C (blue). Error bars indicate the s.d. in the methanol synthesis activity (35%). For the s.d. in the particle size, see Supplementary Figs 5–7. Trendlines were added to guide the eye.
Neither for non-reducible oxide supports such as SiO2 nor for carbon supports a strong interaction between metal particles larger than 2 nm and the support is expected50. This is confirmed by the large contact angle of 135° that has experimentally been found for copper particles on silica in reducing conditions34. Such a large contact angle allows approximating the copper surface area by assuming fully accessible spherical particles. Furthermore, it has been reported that the energy of the copper–silica interface does not depend on the gas environment, and that the contact angle of copper particles larger than 2 nm on silica does not depend on particle size34,45. The observed particle size effect for the copper catalysts without zinc can thus not be due to support effects but rather seems to be due to changes in the structure of the copper surface.
For copper on zinc-containing supports, strong metal–support interactions have been reported in literature. It has been observed that for copper on ZnO both the shape of the copper particles, as well as the coverage of the copper particles with (partly) reduced zinc species depend on the gas environment27,45. The coverage with zinc species might depend on the copper particle size, and could result in a decreased activity for smaller copper particles27. Although we cannot fully exclude that support effects play a role in the observed particle size effect for zinc-containing supports, the similarity of the observed particle size effect for catalysts with and without zinc strongly suggests that the lower activity for small particles is mainly due to changes in the copper surface structure. Hence, decorating the copper surface with migrated (partially) reduced zinc species increases the activity up to a factor of 10, but does not seem to significantly alter the configuration of the active site28.
The TOF per surface atom depends on the ratio between active sites and surface atoms, the activation energy of the rate-determining step and the active site coverages of the reactants in that step. Nanosized metallic particles have surface structures with a size-dependent fraction of different surface sites16,17. Every type of surface site provides an atomic arrangement with its own bond-making and bond-breaking capabilities resulting in a specific activation energy and reactant coverage. For particles larger than ca. 2–3 nm and with a significant d-valence electron density at the Fermi level, the local density of states for a specific surface site is considered to be size-insensitive12,18. Particle size effects for particle sizes larger than 2–3 nm are therefore mostly due to changes in the fractions of sites with different activities.
The fraction of active sites normalized per surface atom depends on the specific atomic configuration of the active site and on the geometry of the metal surface. Reactants, intermediates, transition states and products of catalytic reactions often show stronger adsorption on more unsaturated surface sites7,8,9,10,11,12,13,14. The transition states of reactions that involve the cleavage or formation of molecular π-bonds are in general additionally stabilized by interaction with active sites consisting of multiple atoms, thereby lowering the energy difference between the reactants and the transition state for both the forward and backward reactions10,11,12,13. For example, the cobalt-catalysed Fischer–Tropsch reaction and ruthenium or iron-catalysed ammonia synthesis have been proposed to require a reaction centre with a unique configuration of several metal atoms, which smaller particles cannot accommodate, for example, B5 and C7 sites6,7,8,9,10,11,12,13,17,51,52. Reactions involving dissociation of σ-bonds are often also structure-sensitive as the transition state adsorbs stronger on more unsaturated surface sites. The transition states of reactions that involve the cleavage or formation of σ-bonds do, however, typically not require a unique configuration of several metal atoms10,11,12,13. As intermediates and transition states for formation of σ-bonds are often similarly stabilized on close-packed and on more unsaturated sites, the energy barriers for these reactions are normally relatively insensitive to the structure of the metal surface10,11,12,13,14. For example, the structure sensitivity is typically weak or absent for many hydrogenation reactions7,8,9,10,11,12,13,14,15.
Recently, in the case of the methanol synthesis reaction, density functional theory (DFT) calculations were reported for a higher Miller-index copper surface, Cu(211), which contains step sites, such as B5 sites, and copper step atoms with lower coordination numbers compared with atoms at the most densely packed copper surface, Cu(111). The DFT calculations predict that the energies of both the intermediates, as well as the transition states are generally lower at the Cu(211) than at the Cu(111) surface28. As a result, the adsorption of (intermediate) surface species at Cu(211) is stronger and the energy barriers for the elemental steps in the formation of methanol different due to species-specific changes in adsorption strength. Overall, the energy difference between reactants and least stable transition state decreased, indicating that the Cu(211) surface is more active. At the same time, the stronger adsorption of formate at the higher Miller-index facet results in a high formate surface coverage for CO2 containing synthesis gases. High formate coverages can have a poisoning effect on the hydrogenation of CO and at high coverages also on the hydrogenation of CO2 due to the unavailability of the metal surface sites to other reaction intermediates39,53. Isotopic labelling studies show that CO2 is the main source of methanol in synthesis gases containing both CO and CO2 (ref. 39).
Considering these aspects, the observed decrease in activity for particles smaller than 8 nm can be rationalized along two lines. The first possibility is that the active site consists of a unique configuration of copper atoms, in line with the suggestion by Behrens et al. that step sites are the active sites, since for a Cu(211) surface the overall energy barrier was calculated to be lower28. Van Helden et al. have computed for cobalt face-centered cubic particles that the site fraction of step sites increases with increasing particle size17. The fraction of so-called B5A and B6 step sites stabilizes above 4 nm and the fraction of B5B step sites above 8 nm. Although the equilibrium shapes under reaction conditions for copper particles might be slightly different, these calculations show that the observed particle size effect up to 8 nm might be due to changes in the fraction of specific step sites.
Another possibility is that the activity of more unsaturated surface sites is inhibited by formate and that the reaction predominantly takes place on sites at more densely packed copper surfaces, which are not poisoned by formate. In this case the copper particle size effect is due to the increase in the fraction of atoms with lower coordination numbers below 8 nm (ref. 16). A microkinetic evaluation of Janse van Rensburg et al. using DFT energies for Cu(111) and Cu(211), suggests that for more unsaturated surface sites, the lower overall energy barrier dominates and that changes in the fraction of specific step sites contribute most to the observed particle size effect53.
Methods
Synthesis
Cu(Zn)/SiO2 catalysts were synthesized on different silica supports (silica gels, (aminopropyl-functionalized) Stöber silica, SBA15, SBA16 and FDU12) via a heat treatment of impregnated copper nitrate in N2 or 2% NO/N2, and subsequent a reduction in H2. Cu/SiO2 was also prepared via homogeneous deposition precipitation of copper on colloidal silica followed by a hydrothermal treatment and reduction. Cu(Zn)/C were synthesized on HSAG and carbon xerogels with different pore sizes via impregnation followed by a drying step and a reduction in H2. Cu/ZnO(/Al2O3) catalysts were synthesized via co-precipitation, followed by drying, calcination and reduction.
Characterization
X-ray diffraction was performed with a Bruker-AXS D2 Phaser powder X-ray diffractometer equipped with a Lynxeye detector, in Bragg–Brentano mode with at θ–θ system with a 141 mm radius. The radiation used is Co-Kα12 (λ=1.79026 Å), operated at 30 kV, 10 mA.
TEM images were acquired with a Tecnai 12 (FEI) microscope operated at 120 kV or an image-aberration corrected Titan 80–300 ETEM (FEI) operated at 300 kV. High-angle annular dark-field STEM (HAADF-STEM) and EDX spectroscopy was performed using either a Tecnai 20FEG (FEI) electron microscope equipped with a field emission gun, a Fischione HAADF detector and an EDAX Super Ultra Thin Window EDX detector, or a TALOS F200x (FEI) electron microscope equipped with a field emission gun (XFEG), a Fischione HAADF detector and a SuperX EDX system. For these measurements, samples were placed onto a carbon-coated Ni TEM grid (Agar 162 200 Mesh Ni) and mounted either on a low-background sample holder (Philips) with a 0.1 mm-thick Be specimen support film and a Be ring to clamp the grid, and inserted in the Tecnai 20FEG or on a high-visibility low-background double-tilt sample holder (FEI) with a Be clamp, and inserted in the TALOS F200x. The signal and resolution in the different electron microscope systems was in general sufficient to detect copper particles larger than 2 nm on any of the supports. For each sample, at least 150 particles were analysed with respect to their size by measuring the diameter of a spherical approximation of the projected particle area.
Catalytic testing
The performance of the catalysts in the methanol synthesis reaction was investigated in a fixed-bed stainless-steel reactor with an inner diameter of 0.9 cm (Autoclave Engineers). The calcined Cu(Zn)/SiO2 and Cu/ZnO(/Al2O3) samples, and the reduced and passivated Cu(Zn)/C samples were pressed, ground and sieved to obtain a granulate size of 0.42–0.63 mm. A unit of 0.03–0.9 g catalyst was diluted with 0–3 ml SiC granules (sieve fraction of granulate size 0.25–0.42 mm) and loaded into the reactor (catalyst bed height of 3–7 cm). Subsequently, the samples were (re)reduced in situ at 250 °C (2 °C min−1) for 2.5 h with a flow of 110 ml min−1 20% H2/Ar. After that, the temperature was lowered to 100 °C to prevent premature production of methanol when switching to synthesis gas. The reactor was flushed with synthesis gas (10% Ar, 7% CO2, 23% CO and 60% H2, Linde), which was purified with a metal carbonyl trap (4.0 g of 0.5–1.5 mm H-USY zeolite, CVB-780 from Zeolyst Int., and 5 g activated carbon, Norit R3B). The argon in the synthesis gas feed acted as an internal standard for the gas chromatograph (GC). After 30 min of flushing the pressure was increased to 40 bars. Subsequently, the exit gas composition was analysed every 110 min with a GC (Varian 450). The lines from the reactor to the GC were heated to 150 °C to avoid any methanol or water condensation. The first GC channel consisted of a HAYESEP Q (0.5 m × 1/8 in) column followed by a MOLSIEVE 13x (15 m × 1/8 in) column that led to a thermal conductivity detector. The second GC channel consisted of a CP-SIL 8CB FS capillary column that led to a flame ionization detector. At least three chromatograms were recorded of the synthesis gas feed. The temperature was then increased to 260 °C (2 °C min−1) to initiate methanol production. The amount of catalyst and the synthesis gas flow (10–30 ml min−1) were chosen such that CO+CO2 conversion levels below 20% were obtained. The initial (maximum) activity of the catalysts was determined by the maximum conversion of CO and CO2 after about 2 to 10 h on stream. The s.d. in between different tests in the activity is ±35%. TOFs were calculated per surface metal atom. The dispersion was based on (S)TEM particle size distributions assuming fully accessible spherical copper particles and calculated with the formula: , where Vm is the molar volume of copper, Am the molar area of copper and PS the surface-average particle size in nanometre. The selectivity was determined from the flame ionization detector chromatograms and was in all cases more than 98.5% towards methanol, with trace amounts of dimethyl ether, methane, ethanol, ethane and propane. After catalysis, the samples were passivated for 15 min by exposing the sample to air diluted with Ar at room temperature. The samples were stored in a glove box under argon atmosphere.
Additional details about synthesis, characterization and catalytic testing can be found in the Supplementary Information.
Data availability
All data are available from the authors on reasonable request.
Additional information
How to cite this article: van den Berg, R. et al. Structure sensitivity of Cu and CuZn catalysts relevant to industrial methanol synthesis. Nat. Commun. 7, 13057 doi: 10.1038/ncomms13057 (2016).
References
Galeano, C. et al. Toward highly stable electrocatalysts via nanoparticle pore confinement. J. Am. Chem. Soc. 134, 20457–20465 (2012).
Bell, A. T. The impact of nanoscience on heterogeneous catalysis. Science 299, 1688–1691 (2003).
Zečević, J., Vanbutsele, G., de Jong, K. P. & Martens, J. A. Nanoscale intimacy in bifunctional catalysts for selective conversion of hydrocarbons. Nature 528, 245–248 (2015).
Munnik, P., de Jongh, P. E. & de Jong, K. P. Recent developments in the synthesis of supported catalysts. Chem. Rev. 115, 6687–6718 (2015).
Torres Galvis, H. M. et al. Iron particle size effects for direct production of lower olefins from synthesis gas. J. Am. Chem. Soc. 134, 16207–16215 (2012).
Bezemer, G. L. et al. Cobalt particle size effects in the Fischer-Tropsch reaction studied with carbon nanofiber supported catalysts. J. Am. Chem. Soc. 128, 3956–3964 (2006).
Boudart, M. Catalysis by supported metals. Adv. Catal. 20, 153–166 (1969).
Somorjai, G. A. & Carrazza, J. Structure sensitivity of catalytic reactions. Ind. Eng. Chem. Fundam 25, 63–69 (1986).
Henry, C. R. Surface studies of supported model catalysts. Surf. Sci. Rep. 31, 231–325 (1998).
Cuenya, B. R. & Behafarid, F. Nanocatalysis: size- and shape-dependent chemisorption and catalytic reactivity. Surf. Sci. Rep. 70, 135–187 (2015).
Nørskov, J. K. et al. The nature of the active site in heterogeneous catalysis. Chem. Soc. Rev. 37, 2163–2171 (2008).
van Santen, R. A. Complementary structure sensitive and insensitive catalytic relationships. Acc. Chem. Res. 42, 57–66 (2009).
Liu, Z.-P. & Hu, P. General rules for predicting where a catalytic reaction should occur on metal surfaces: a density functional theory study of C-H and C-O bond breaking/making on flat, stepped, and kinked metal surfaces. J. Am. Chem. Soc. 125, 1958–1967 (2003).
Calle-Vallejo, F., Loffreda, D., Koper, M. T. M. & Sautet, P. Introducing structural sensitivity into adsorption-energy scaling relations by means of coordination numbers. Nat. Chem. 7, 403–410 (2015).
Wang, G., Morikawa, Y., Matsumoto, T. & Nakamura, J. Why is formate synthesis insensitive to copper surface structures? J. Phys. Chem. B 110, 9–11 (2006).
van Hardeveld, R. & Hartog, F. The statistics of surface atoms and surface sites on metal crystals. Surf. Sci. 15, 189–230 (1969).
van Helden, P., Ciobîcă, I. M. & Coetzer, R. L. J. The size-dependent site composition of FCC cobalt nanocrystals. Catal. Today 261, 48–59 (2016).
Crampton, A. S. et al. Structure sensitivity in the nonscalable regime explored via catalysed ethylene hydrogenation on supported platinum nanoclusters. Nat. Commun. 7, 10389 (2016).
Hansen, J. B. & Højlund Nielsen, P. E. in Handbook of Heterogeneous Catalysis eds Ertl G., Knözinger H., Schüth F., Weltkamp J. Ch. 13 2920–2949Wiley-VCH, (2008).
Chinchen, G. C., Waugh, K. C. & Whan, D. A. The activity and state of the copper surface in methanol synthesis catalysts. Appl. Catal. 25, 101–107 (1986).
Pan, W. X., Cao, R., Roberts, D. L. & Griffin, G. L. Methanol synthesis activity of Cu/ZnO catalysts. J. Catal. 114, 440–446 (1988).
Burch, R. & Chappell, R. J. Support and additive effects in the synthesis of methanol over copper catalysts. Appl. Catal. 45, 131–150 (1988).
Robbins, J. L., Iglesia, E., Kelkar, C. P. & DeRites, B. Methanol synthesis over Cu/SiO2 catalysts. Catal. Lett. 10, 1–10 (1991).
Kurtz, M., Wilmer, H., Genger, T., Hinrichsen, O. & Muhler, M. Deactivation of supported copper catalysts for methanol synthesis. Catal. Lett. 86, 77–80 (2003).
Fichtl, M. B. et al. Counting of oxygen defects versus metal surface sites in methanol synthesis catalysts by different probe molecules. Angew. Chem. Int. Ed. 53, 7043–7047 (2014).
Kuld, S., Conradsen, C., Moses, P. G., Chorkendorff, I. & Sehested, J. Quantification of zinc atoms in a surface alloy on copper in an industrial-type methanol synthesis catalyst. Angew. Chem. Int. Ed. 53, 5941–5945 (2014).
Kuld, S. et al. Quantifying the promotion of Cu catalysts by ZnO for methanol synthesis. Science 352, 969–974 (2016).
Behrens, M. et al. The active site of methanol synthesis over Cu/ZnO/Al2O3 industrial catalysts. Science 336, 893–897 (2012).
Nakamura, J., Choi, Y. & Fujitani, T. On the issue of the active site and the role of ZnO in Cu/ZnO methanol synthesis catalysts. Top. Catal. 22, 277–285 (2003).
Yoshihara, J. & Campbell, C. T. Methanol synthesis and reverse water-gas shift kinetics over Cu(110) model catalysts: structural sensitivity. J. Catal. 161, 776–782 (1996).
Prieto, G., Zečević, J., Friedrich, H., de Jong, K. P. & de Jongh, P. E. Towards stable catalysts by controlling collective properties of supported metal nanoparticles. Nat. Mater. 12, 34–39 (2013).
Vesborg, P. C. K. et al. Transient behavior of Cu/ZnO-based methanol synthesis catalysts. J. Catal. 262, 65–72 (2009).
Munnik, P. et al. Copper nitrate redispersion to arrive at highly active silica-supported copper catalysts. J. Phys. Chem. C 115, 14698–14706 (2011).
van den Berg, R. et al. Support functionalization to retard Ostwald ripening in copper methanol synthesis catalysts. ACS Catal. 5, 4439–4448 (2015).
Prieto, G., Meeldijk, J. D., de Jong, K. P. & de Jongh, P. E. Interplay between pore size and nanoparticle spatial distribution: consequences for the stability of CuZn/SiO2 methanol synthesis catalysts. J. Catal. 303, 31–40 (2013).
Wolters, M. et al. Combining confinement and NO calcination to arrive at highly dispersed supported nickel and cobalt oxide catalysts with a tunable particle size. Catal. Today 163, 27–32 (2011).
Baltes, C., Vukojevic, S. & Schüth, F. Correlations between synthesis, precursor, and catalyst structure and activity of a large set of CuO/ZnO/Al2O3 catalysts for methanol synthesis. J. Catal. 258, 334–344 (2008).
Barin, I. Thermochemical Data of Pure Substances 3 edn Vol. 1, (VCH Wiley (1995).
Studt, F. et al. The mechanism of CO and CO2 hydrogenation to methanol over Cu-based catalysts. ChemCatChem. 7, 1105–1111 (2015).
Günter, M. M. et al. Implication of the microsctructure of binary Cu/ZnO catalysts for their catalytic activity in methanol synthesis. Catal. Lett. 71, 37–44 (2001).
Fujitani, T. & Nakamura, J. The effect of ZnO in methanol synthesis catalysts on Cu dispersion and the specific activity. Catal. Lett. 56, 119–124 (1998).
Burch, R., Golunski, S. E. & Spencer, M. S. The role of copper and zinc oxide in methanol synthesis catalysts. J. Chem. Soc. Faraday Trans. 86, 2683–2691 (1990).
Klier, K. Methanol synthesis. Adv. Catal. 31, 243–313 (1982).
Frost, J. C. Junction effect interactions in methanol synthesis catalysts. Nature 334, 577–580 (1988).
Hansen, P. L. et al. Atom-resolved imaging of dynamic shape changes in supported copper nanocrystals. Science 295, 2053–2055 (2002).
Grunwaldt, J. D., Molenbroek, A. M., Topsøe, N. Y., Topsøe, H. & Clausen, B. S. In situ investigations of structural changes in Cu/ZnO catalysts. J. Catal. 194, 452–460 (2000).
Naumann d'Alnoncourt, R. et al. The influence of strongly reducing conditions on strong metal-support interactions in Cu/ZnO catalysts used for methanol synthesis. Phys. Chem. Chem. Phys. 8, 1525–1538 (2006).
Batyrev, E., van den Heuvel, J., Beckers, J., Jansen, W. & Castricum, H. The effect of the reduction temperature on the structure of Cu/ZnO/SiO2 catalysts for methanol synthesis. J. Catal. 229, 136–143 (2005).
Jansen, W. et al. Dynamic behavior of the surface structure of Cu/ZnO/SiO2 catalysts. J. Catal. 210, 229–236 (2002).
Chen, H.-W., White, J. M. & Ekerdt, J. G. Electronic effects of supports on copper catalysts. J. Catal. 99, 293–303 (1986).
Honkala, K. et al. Ammonia synthesis from first-principles calculations. Science 307, 555–558 (2005).
Spencer, N. D., Schoonmaker, R. C. & Somorjai, G. A. Iron single crystals as ammonia synthesis catalysts: effect of surface structure on catalyst activity. J. Catal. 74, 129–135 (1982).
Janse van Rensburg, W., Petersen, M. A., Datt, M. S., van den Berg, J.-A. & van Helden, P. On the kinetic interpretation of DFT-derived energy profiles: Cu-catalyzed methanol synthesis. Catal. Lett. 145, 559–568 (2014).
Acknowledgements
The project was supported financially by Haldor Topsoe A/S. K.P.d.J. acknowledges the European Research Council, EU FP7 ERC Advanced Grant no. 338846. P.E.d.J. acknowledges The Netherlands Organization for Scientific Research NWO-Vici programme. Dr Jens Sehested is acknowledged for his suggestion to explore CuZn catalysts with different thermodynamic stabilities of the Zn precursors. Dr Stig Helveg is thanked for his contribution to the electron microscopy studies. Sebastian Kuld is acknowledged for TPR-MS measurements, Hans Meeldijk for STEM-HAADF and EDX measurements, Ceri Zwart, Elian Griffioen, Jochem Blum and Luc Smulders for the synthesis of CuZnHSAG samples, and Tanja Parmentier for the synthesis of Cu on aminopropyl-functionalized silica. We are grateful to Robert Goedvree of Grace for providing the silica gel supports.
Author information
Authors and Affiliations
Contributions
R.v.d.B. synthesized, characterized and tested catalysts, and drafted the manuscript; G.P. synthesized, characterized and tested CuZn/SiO2 catalysts; G.K., L.I.v.d.W., A.J.v.B. and S.L.-J. synthesized Cu/SiO2, Cu/C, CuZn/C and Cu/ZnO(/Al2O3) catalysts, respectively; P.E.d.J. and K.P.d.J. contributed to experimental design, data analysis and manuscript writing.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures 1-18, Supplementary Tables 1-6, Supplementary Methods and Supplementary References (PDF 4946 kb)
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
van den Berg, R., Prieto, G., Korpershoek, G. et al. Structure sensitivity of Cu and CuZn catalysts relevant to industrial methanol synthesis. Nat Commun 7, 13057 (2016). https://doi.org/10.1038/ncomms13057
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms13057
This article is cited by
-
Interfacial catalysis of metal-oxide nanocatalysts in CO2 hydrogenation to value-added C1 chemicals
Surface Science and Technology (2023)
-
A practical concept for catalytic carbonylations using carbon dioxide
Nature Communications (2022)
-
Induced activation of the commercial Cu/ZnO/Al2O3 catalyst for the steam reforming of methanol
Nature Catalysis (2022)
-
Structure–performance correlations in the hybrid oxide-supported copper–zinc SAPO-34 catalysts for direct synthesis of dimethyl ether from CO2
Journal of Materials Science (2022)
-
Cu–Zn Synergy for CO Hydrogenation to Ethanol and Methanol on CuZnO Catalysts
Catalysis Letters (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.