Quantum mechanics dictates that a continuous measurement of the position of an object imposes a random quantum back-action (QBA) perturbation on its momentum. This randomness translates with time into position uncertainty, thus leading to the well known uncertainty on the measurement of motion1,2. As a consequence of this randomness, and in accordance with the Heisenberg uncertainty principle, the QBA3,4 puts a limitation—the so-called standard quantum limit—on the precision of sensing of position, velocity and acceleration. Here we show that QBA5 on a macroscopic mechanical oscillator can be evaded if the measurement of motion is conducted in the reference frame of an atomic spin oscillator6,7. The collective quantum measurement on this hybrid system of two distant and disparate oscillators is performed with light. The mechanical oscillator is a vibrational ‘drum’ mode of a millimetre-sized dielectric membrane8, and the spin oscillator is an atomic ensemble in a magnetic field9,10. The spin oriented along the field corresponds to an energetically inverted spin population and realizes a negative-effective-mass oscillator, while the opposite orientation corresponds to an oscillator with positive effective mass. The QBA is suppressed by −1.8 decibels in the negative-mass setting and enhanced by 2.4 decibels in the positive-mass case. This hybrid quantum system paves the way to entanglement generation and distant quantum communication between mechanical and spin systems and to sensing of force, motion and gravity beyond the standard quantum limit.
Subscribe to Journal
Get full journal access for 1 year
only $3.90 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Rent or Buy article
Get time limited or full article access on ReadCube.
All prices are NET prices.
Caves, C. M., Thorne, K. S., Drever, R. W. P., Sandberg, V. D. & Zimmermann, M. On the measurement of a weak classical force coupled to a quantum-mechanical oscillator. I. Issues of principle. Rev. Mod. Phys. 52, 341–392 (1980)
Braginsky, V. B., Vorontsov, Y. I. & Thorne, K. S. Quantum nondemolition measurements. Science 209, 547–557 (1980)
Purdy, T. P., Peterson, R. W. & Regal, C. A. Observation of radiation pressure shot noise on a macroscopic object. Science 339, 801–804 (2013)
Spethmann, N., Kohler, J., Schreppler, S., Buchmann, L. & Stamper-Kurn, D. M. Cavity-mediated coupling of mechanical oscillators limited by quantum back-action. Nat. Phys. 12, 27–31 (2016)
Nielsen, W. H. P., Tsaturyan, Y., Møller, C. B., Polzik, E. S. & Schliesser, A. Multimode optomechanical system in the quantum regime. Proc. Natl Acad. Sci. USA 114, 62–66 (2017)
Polzik, E. S. & Hammerer, K. Trajectories without quantum uncertainties. Ann. Phys. 527, A15–A20 (2015)
Hammerer, K., Aspelmeyer, M., Polzik, E. S. & Zoller, P. Establishing Einstein-Poldosky-Rosen channels between nanomechanics and atomic ensembles. Phys. Rev. Lett. 102, 020501 (2009)
Tsaturyan, Y. et al. Demonstration of suppressed phonon tunneling losses in phononic bandgap shielded membrane resonators for high-Q optomechanics. Opt. Express 22, 6810–6821 (2014)
Hammerer, K., Sørensen, A. S. & Polzik, E. S. Quantum interface between light and atomic ensembles. Rev. Mod. Phys. 82, 1041–1093 (2010)
Vasilakis, G. et al. Generation of a squeezed state of an oscillator by stroboscopic back-action-evading measurement. Nat. Phys. 11, 389–392 (2015)
Tsang, M. & Caves, C. M. Coherent quantum-noise cancellation for optomechanical sensors. Phys. Rev. Lett. 105, 123601 (2010)
Bariani, F., Seok, H., Singh, S., Vengalattore, M. & Meystre, P. Atom-based coherent quantum-noise cancellation in optomechanics. Phys. Rev. A 92, 043817 (2015)
Zhang, K., Meystre, P. & Zhang, W. Back-action-free quantum optomechanics with negative-mass Bose-Einstein condensates. Phys. Rev. A 88, 043632 (2013)
Woolley, M. J. & Clerk, A. A. Two-mode back-action-evading measurements in cavity optomechanics. Phys. Rev. A 87, 063846 (2013)
Motazedifard, A., Bemani, F., Naderi, M. H., Roknizadeh, R. & Vitali, D. Force sensing based on coherent quantum noise cancellation in a hybrid optomechanical cavity with squeezed-vacuum injection. New J. Phys. 18, 073040 (2016)
Tsang, M. & Caves, C. M. Evading quantum mechanics: engineering a classical subsystem within a quantum environment. Phys. Rev. X 2, 031016 (2012)
Julsgaard, B., Kozhekin, A. & Polzik, E. S. Experimental long-lived entanglement of two macroscopic objects. Nature 413, 400–403 (2001)
Wasilewski, W. et al. Quantum noise limited and entanglement-assisted magnetometry. Phys. Rev. Lett. 104, 133601 (2010)
Caniard, T., Verlot, P., Briant, T., Cohadon, P.-F. & Heidmann, A. Observation of back-action noise cancellation in interferometric and weak force measurements. Phys. Rev. Lett. 99, 110801 (2007)
Ockeloen-Korppi, C. F. et al. Quantum backaction evading measurement of collective mechanical modes. Phys. Rev. Lett. 117, 140401 (2016)
Unruh, W. G. Quantum Noise in the Interferometer Detector 647–660 (Springer US, 1983)
Kimble, H. J., Levin, Y., Matsko, A. B., Thorne, K. S. & Vyatchanin, S. P. Conversion of conventional gravitational-wave interferometers into quantum nondemolition interferometers by modifying their input and/or output optics. Phys. Rev. D 65, 022002 (2001)
Danilishin, S. L. & Khalili, F. Y. Quantum measurement theory in gravitational-wave detectors. Living Rev. Relativ. 15, 5 (2012)
Kurizki, G. et al. Quantum technologies with hybrid systems. Proc. Natl Acad. Sci. USA 112, 3866–3873 (2015)
Jöckel, A. et al. Sympathetic cooling of a membrane oscillator in a hybrid mechanical-atomic system. Nat. Nanotechnol. 10, 55–59 (2015)
Seltzer, S. J. & Romalis, M. V. High-temperature alkali vapor cells with antirelaxation surface coatings. J. Appl. Phys. 106, 114905 (2009)
Aspelmeyer, M., Kippenberg, T. J. & Marquardt, F. Cavity optomechanics. Rev. Mod. Phys. 86, 1391–1452 (2014)
Weis, S. et al. Optomechanically induced transparency. Science 330, 1520–1523 (2010)
Tsaturyan, Y., Barg, A., Polzik, E. S. & Schliesser, A. Ultra-coherent nanomechanical resonators via soft clamping and dissipation dilution. Nat. Nanotechnol. http://dx.doi.org/10.1038/nnano.2017.101 (2017)
Corsini, E. P., Karaulanov, T., Balabas, M. & Budker, D. Hyperfine frequency shift and Zeeman relaxation in alkali-metal-vapor cells with antirelaxation alkene coating. Phys. Rev. A 87, 022901 (2013)
Borregaard, J. et al. Scalable photonic network architecture based on motional averaging in room temperature gas. Nat. Commun. 7, 11356 (2016)
Jensen, K. Quantum Information, Entanglement and Magnetometry with Macroscopic Samples and Non-classical Light. PhD dissertation, Univ. Copenhagen (2011)
Holstein, T. & Primakoff, H. Field dependence of the intrinsic domain magnetization of a ferromagnet. Phys. Rev. 58, 1098–1113 (1940)
Jayich, A. M . et al. Dispersive optomechanics: a membrane inside a cavity. New J. Phys. 10, 095008 (2008)
Wilson, D. J., Regal, C. A., Papp, S. B. & Kimble, H. J. Cavity optomechanics with stoichiometric SiN films. Phys. Rev. Lett. 103, 207204 (2009)
Marquardt, F., Chen, J. P., Clerk, A. A. & Girvin, S. M. Quantum theory of cavity-assisted sideband cooling of mechanical motion. Phys. Rev. Lett. 99, 093902 (2007)
Vasilyev, D. V., Hammerer, K., Korolev, N. & Sørensen, A. S. Quantum noise for Faraday light matter interfaces. J. Phys. At. Mol. Opt. Phys. 45, 124007 (2012)
We acknowledge discussions with F. Khalili. This work was supported by the European Union Seventh Framework Program (ERC grant INTERFACE, projects SIQS and iQUOEMS), the European Union’s Horizon 2020 research and innovation programme (ERC grant Q-CEOM, grant agreement no. 638765), a Sapere Aude starting grant from the Danish Council for Independent Research, and the DARPA project QUASAR. R.A.T. is funded by the program Science without Borders of the Brazilian Federal Government. E.Z. is supported by the Carlsberg Foundation. K.H. and E.Z. acknowledge support from DFG through SFB 1227 (DQ-mat). We acknowledge help from M. Gaudesius at the early stage of the experimental development.
The authors declare no competing financial interests.
Reviewer Information Nature thanks W. Bowen and the other anonymous reviewer(s) for their contribution to the peer review of this work.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
The atomic spin system is pictured in the black–orange dashed box (left), along with its B field and optical pumping (blue and olive arrows; bottom); the optomechanical membrane-in-the-middle set-up is in the blue box (right). Circled numerals indicate sections with specific functions. The hybrid system is probed via a travelling optical mode (pink lines and arrows). The atomic system, driven by local oscillator 1 (LO1) with linear polarization angle set by section (0), has its output polarization filtered in section (1) and is recombined with the correct phase with LO2 in section (2), set electronically via suitable detection in D1; the apparatus in section (3) ensures that both local oscillator and the filtered atomic response have the same polarization. The optomechanical system is probed by LO2 in reflection and phase-sensitive detection is done via homodyning with LO3 in D2. Probing the remaining cavity port in reflection with LOPDH, the optomechanical system is frequency stabilized using the Pound–Drever–Hall (PDH) technique on the signal of detector DPDH. HWP, half-wave plate; QWP, quarter-wave plate; PBS, polarizing beamsplitter; EOM, electro-optic modulator. See Methods for details.
The atomic spin (in the spin cell, blue box at left) is driven by light noise XL,in and spin noise FS. Output light of the spin system is channelled to the optomechanical system. En route, it experiences losses characterized by a transmissivity η1 associated with additional light noise V1,in and a phase rotation by an angle φ, resulting in a driving field of the optomechanical system. The optomechanical cavity (shown blue at right) is two-sided, with decay rates κ1 and κ2. The optomechanical system is driven in addition by light noise Vin and a thermal force F. The output field of the optomechanical system experiences further losses, with transmissivity η2 associated with additional light noise V2,in. All unwanted additional noise sources are indicated with dashed lines.
About this article
Cite this article
Møller, C., Thomas, R., Vasilakis, G. et al. Quantum back-action-evading measurement of motion in a negative mass reference frame. Nature 547, 191–195 (2017). https://doi.org/10.1038/nature22980
Communications in Theoretical Physics (2021)
Physical Review X (2020)
Physical Review A (2020)