Sodium-ion batteries have been identified as appealing alternatives to lithium-ion batteries because they are made from raw materials that are less expensive, more abundant and less toxic. However, the frequently discussed cost advantage of sodium-ion batteries has, so far, not been examined in detail. In this Perspective, we use the Battery Performance and Cost (BatPaC) model to undertake a cost analysis of the materials for sodium-ion and lithium-ion cells, as well as complete batteries, and determine the effect of exchanging lithium with sodium, as well as the effect of replacing the material used for the anode current collector foil, on the cost. Moreover, we compare the calculated production costs of exemplary sodium-ion and lithium-ion batteries and highlight the most relevant parameters for optimization. Finally, the major raw materials for lithium-ion cathodes are examined in terms of potential supply risks because supply issues may lead to increased costs. Through the use of a scenario-based supply and demand analysis, the risks to the supply of lithium and cobalt are assessed, and implications for battery research are discussed. Overall, we provide a broad and interdisciplinary perspective on modern batteries and future directions for this field, with a focus on sodium-ion batteries.
This is a preview of subscription content
Subscribe to Nature+
Get immediate online access to the entire Nature family of 50+ journals
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
Armand, M. & Tarascon, J.M. Building better batteries. Nature 451, 652–657 (2008).
Yoshino, A. The birth of the lithium-ion battery. Angew. Chemie Int. Ed. 51, 5798–5800 (2012).
Scrosati, B. History of lithium batteries. J. Solid State Electrochem. 15, 1623–1630 (2011).
Nishi, Y. The development of lithium ion secondary batteries. Chem. Rec. 1, 406–413 (2001).
Nishi, Y. in Lithium-Ion Batteries (eds Yoshio, M., Brodd, R. J. & Kozawa, A. ) v–vii (Springer, New York, 2009).
Blomgren, G. E. The development and future of lithium ion batteries. J. Electrochem. Soc. 164, A5019–A5025 (2017).
Murray, J. L. The Al−Na (aluminum−sodium) system. Bull. Alloy Phase Diagrams 4, 407–410 (1983).
Larcher, D. & Tarascon, J.M. Towards greener and more sustainable batteries for electrical energy storage. Nat. Chem. 7, 19–29 (2014).
United States Geological Survey. Mineral commodity summaries 2018. USGS Mineral Resources Program https://minerals.usgs.gov/minerals/pubs/mcs/2018/mcs2018.pdf (2018).
Gruber, P. W. et al. Global lithium availability. J. Ind. Ecol. 15, 760–775 (2011).
Yabuuchi, N., Kubota, K., Dahbi, M. & Komaba, S. Research development on sodium-ion batteries. Chem. Rev. 114, 11636–11682 (2014).
Kim, Y., Ha, K.H., Oh, S. M. & Lee, K. T. High-capacity anode materials for sodium-ion batteries. Chem. Eur. J. 20, 11980–11992 (2014).
Berg, E. J., Villevieille, C., Streich, D., Trabesinger, S. & Novák, P. Rechargeable batteries: grasping for the limits of chemistry. J. Electrochem. Soc. 162, A2468–A2475 (2015).
Choi, J. W. & Aurbach, D. Promise and reality of post-lithium-ion batteries with high energy densities. Nat. Rev. Mater. 1, 16013 (2016).
Nelson, P. A., Gallagher, K. G., Bloom, I. & Dees, D. W. Modeling the performance and cost of lithium-ion batteries for electric-drive vehicles. Argonne National Laboratory http://www.ipd.anl.gov/anlpubs/2011/10/71302.pdf (2012).
Gaines, L. & Cuenca, R. Costs of lithium-ion batteries for vehicles. Argonne National Laboratory https://anl.app.box.com/s/6ae31n7z9mop9opwp477mqpkcykljysr (2000).
Ciez, R. E. & Whitacre, J. F. The cost of lithium is unlikely to upend the price of Li-ion storage systems. J. Power Sources 320, 310–313 (2016).
United States Geological Survey. Mineral Commodity Summaries 2017. USGS Mineral Resources Program https://minerals.usgs.gov/minerals/pubs/mcs/2017/mcs2017.pdf (2017).
United States Geological Survey. Metal Prices in the United States Through 2010: U. S. Geological Survey Scientific Investigations Report 2012–5188. USGS Publications Warehouse https://pubs.usgs.gov/sir/2012/5188/sir2012-5188.pdf (2013).
Billaud, J. et al. β-NaMnO2: a high-performance cathode for sodium-ion batteries. J. Am. Chem. Soc. 136, 17243–17248 (2014).
Kim, Y. et al. An amorphous red phosphorus/carbon composite as a promising anode material for sodium ion batteries. Adv. Mater. 25, 3045–3049 (2013).
Li, W. et al. Confined amorphous red phosphorus in MOF-derived N-doped microporous carbon as a superior anode for sodium-ion battery. Adv. Mater. 29, 1605820 (2017).
Baumann, M., Peters, J. F., Weil, M. & Grunwald, A. CO2 footprint and life-cycle costs of electrochemical energy storage for stationary grid applications. Energy Technol. 5, 1071–1083 (2017).
Peters, J. F., Baumann, M., Zimmermann, B., Braun, J. & Weil, M. The environmental impact of Li-ion batteries and the role of key parameters — a review. Renew. Sustain. Energy Rev. 67, 491–506 (2017).
Mu, L. et al. Prototype sodium-ion batteries using an air-stable and Co/Ni-free O3 layered metal oxide cathode. Adv. Mater. 27, 6928–6933 (2015).
The National Center for Scientific Research. A promising new prototype of battery. CNRS http://www2.cnrs.fr/en/2659.htm (2015).
Keller, M., Buchholz, D. & Passerini, S. Layered Na-ion cathodes with outstanding performance resulting from the synergetic effect of mixed P- and O-type phases. Adv. Energy Mater. 6, 1501555 (2016).
Keller, M., Vaalma, C., Buchholz, D. & Passerini, S. Development and characterization of high-performance sodium-ion cells based on layered oxide and hard carbon. ChemElectroChem 3, 1124–1132 (2016).
Xia, X. & Dahn, J. R. NaCrO2 is a fundamentally safe positive electrode material for sodium-ion batteries with liquid electrolytes. Electrochem. Solid-State Lett. 15, A1–A4 (2012).
Kondou, H., Kim, J. & Watanabe, H. Thermal analysis on Na plating in sodium ion battery. Electrochemistry 85, 647–649 (2017).
Arora, P., White, R. E. & Doyle, M. Capacity fade mechanisms and side reactions in lithium-ion batteries. J. Electrochem. Soc. 145, 3647–3667 (1998).
Guo, R., Lu, L., Ouyang, M. & Feng, X. Mechanism of the entire overdischarge process and overdischarge-induced internal short circuit in lithium-ion batteries. Sci. Rep. 6, 30248 (2016).
Komaba, S., Hasegawa, T., Dahbi, M. & Kubota, K. Potassium intercalation into graphite to realize high-voltage/high-power potassium-ion batteries and potassium-ion capacitors. Electrochem. Commun. 60, 172–175 (2015).
Eshetu, G. G. et al. Comprehensive insights into the reactivity of electrolytes based on sodium ions. ChemSusChem 9, 462–471 (2016).
Paulsen, J., Komaba, S., Hara, R., Yabuuchi, N. & Kajiyama, M. EP2962346 (2014).
Kesler, S. E. et al. Global lithium resources: relative importance of pegmatite, brine and other deposits. Ore Geol. Rev. 48, 55–69 (2012).
Nassar, N. T., Graedel, T. E. & Harper, E. M. Byproduct metals are technologically essential but have problematic supply. Sci. Adv. 1, e1400180 (2015).
Evans, K. in Critical Metals Handbook (ed. Gunn, G. ) 230–260 (Wiley, Oxford, 2014).
An, J. W. et al. Recovery of lithium from Uyuni salar brine. Hydrometallurgy 117–118, 64–70 (2012).
Vikström, H., Davidsson, S. & Höö k, M. Lithium availability and future production outlooks. Appl. Energy 110, 252–266 (2013).
Galaxy Resources. Annual Report 2012. Galaxy Resources http://www.galaxyresources.com.au/Investor/gxy_ar_dec2012.pdf (2013).
The Cobalt Institute. Application of cobalt in rechargeable batteries. The Cobalt Institute https://www.cobaltinstitute.org/rechargeable-batteries.html (2018).
Weil, M. & Ziemann, S. in Lithium-Ion Batteries (ed. Pistoia, G. ) 509–528 (Elsevier, Amsterdam, 2014).
Amnesty International. ‘This is what we die for.’ Human rights abuses in the Democratic Republic of the Congo power the global trade in cobalt. Amnesty International https://www.amnestyusa.org/files/this_what_we_die_for_-_report.pdf (2016).
Pillot, C. Lithium ion battery raw material supply & demand 2016–2025. Avicenne Energy http://cii-resource.com/cet/AABE-03-17/Presentations/BRMT/Pillot_Christophe.pdf (2017).
Roland Berger Strategy Consultants. The lithium-ion battery value chain. Peter Sauber Argentur http://www.messe-sauber.de/doc/files/e4_1_kruger_script.pdf (2012).
Chung, D., Elgqvist, E. & Santhanagopalan, S. Automotive lithium-ion cell manufacturing: regional cost structures and supply chain considerations. National Renewable Energy Laboratory https://www.nrel.gov/docs/fy16osti/66086.pdf (2016).
The authors thank L. Grande for fruitful discussions and acknowledge the financial support of the Helmholtz Association. J. Riegert and K. Peters are acknowledged for their help with preparing the manuscript text and figures before submission.
The authors declare no competing interests.
About this article
Cite this article
Vaalma, C., Buchholz, D., Weil, M. et al. A cost and resource analysis of sodium-ion batteries. Nat Rev Mater 3, 18013 (2018). https://doi.org/10.1038/natrevmats.2018.13
Role of the voltage window on the capacity retention of P2-Na2/3[Fe1/2Mn1/2]O2 cathode material for rechargeable sodium-ion batteries
Communications Chemistry (2022)
Nature Energy (2022)
Entropy and crystal-facet modulation of P2-type layered cathodes for long-lasting sodium-based batteries
Nature Communications (2022)
Nature Sustainability (2022)
Rare Metals (2022)