Nature | News

US fusion in budget vice

Domestic facilities struggle for survival as funding is directed to international reactor.

Article tools

M. Garrett

The Alcator-C-Mod fusion experiment is facing closure.

For years, US researchers have been steadfast in their support of ITER, the world’s largest fusion-energy experiment, which is under construction near Cadarache, France. But with funding commitments to ITER now putting the squeeze on three existing facilities in the United States, enthusiasm for the international project is becoming as difficult to sustain as a fusion reaction.

“I think we should ask whether this is the right path,” Earl Marmar, head of the Alcator C-Mod fusion experiment run by the Massachusetts Institute of Technology in Cambridge, told colleagues on 18 July. The venue was a meeting of a US Department of Energy (DOE) group tasked with setting priorities for the non-ITER portion of the US fusion programme. At the meeting, in Bethesda, Maryland, Marmar pointed out that when US fusion researchers signed on to ITER in 2003, the project’s total construction cost was projected to be about US$5 billion, of which the United States would provide 9% over ten years. Now, the construction costs are projected to be roughly four times as much. Furthermore, the funds to support ITER were not supposed to be siphoned from existing facilities — yet if the total budget for US fusion science remains flat, as is expected, that is precisely what will happen (see ‘Death by ITER’).

Marmar’s facility houses one of three US tokamaks — doughnut-shaped vessels in which physicists magnetically confine hydrogen nuclei in a plasma and heat them until they fuse and liberate energy. Alcator received $29 million in federal funding this year. But as ITER payments increase, US President Barack Obama’s 2013 budget proposal for the DOE would chop Alcator’s allocation back to $16 million, shutting down operations and forcing the experiment to lay off more than half of its 120 staff members.

Source: D. Brunner/MIT

Stephen Dean, president of Fusion Power Associates, an advocacy group in Gaithersburg, Maryland, says that DOE officials have little choice but to cut Alcator, the smallest of the three US experiments, to afford an overall US ITER commitment that has grown to about $2.2 billion. “Why can’t we get by with two?” asks Dean. “It’s not an insubstantial argument.”

Yet leaders at the three experiments insist that all provide unique science (see ‘Tokamaks under pressure’). Marmar says that Alcator, for example, can operate at extremely high magnetic-field strengths that mimic those planned at ITER. And whereas most tokamaks have inner walls made of graphite, Alcator researchers have pioneered the use of tungsten — a more durable material that ITER is planning to adopt. Current experiments at Alcator also explore the use of special radio-wave antennas to heat the plasma in ways that reduce erosion of the walls.

Stewart Prager, director of the Princeton Plasma Physics Laboratory in New Jersey, has a different argument for keeping all three experimental facilities running. If the United States is to spend all this money on ITER, he says, then it must maintain domestic plasma-science expertise that can take advantage of what is learned there. “Otherwise, the results from ITER will only benefit the rest of the world.”

Table

Tokamaks under pressure

US President Barack Obama’s 2013 budget proposal for the Department of Energy would cut funding for the three US tokamak fusion reactors by US$24 million and put one, Alcator C-Mod, on a path to cancellation.

Name DIII-D Alcator C-Mod National Spherical Torus Experiment (NSTX)
Location San Diego, California Cambridge, Massachusetts Princeton, New Jersey
Year completed 1986 1993 1999
2012 funding $69 million $29 million $50 million
Plasma volume 20 cubic metres 1 cubic metre 11 cubic metres
Peak magnetic field 2.2 tesla 8 tesla 1 tesla
Peak duration of plasma heating 10 seconds 4 seconds 5 seconds
Unique science Because DIII-D has a similar shape to the international ITER reactor, it is a test bed for working out design kinks in the larger project. Alcator pioneered tokamak walls made of tungsten, an approach now being used at ITER. The nearly spherical plasma could allow fusion in lower magnetic fields than required by other reactors — and with lower magnet costs.

Source: DIII-D/Alcator C-Mod/NSTX

It seems that some members of the US Congress are listening. On 6 June, the House of Representatives voted to boost ITER funding and to support the domestic programme at almost 2012 levels. The Senate’s version of the bill, which has not yet been voted on, currently agrees with the cuts in the Obama administration’s budget request — but directs the DOE to explore the impact of simply withdrawing from ITER.

US fusion researchers do not want that — yet. But if the 2014 budget looks at all like the 2013 one, Dean predicts, the knives will be out for ITER. “They’re not trying to kill ITER just yet,” he says. “If this happens again in 2014, I’m not so sure.”


 

Journal name:
Nature
Volume:
487,
Pages:
420
Date published:
()
DOI:
doi:10.1038/487420a

For the best commenting experience, please login or register as a user and agree to our Community Guidelines. You will be re-directed back to this page where you will see comments updating in real-time and have the ability to recommend comments to other users.

Comments

Commenting is currently unavailable.

sign up to Nature briefing

What matters in science — and why — free in your inbox every weekday.

Sign up

Listen

new-pod-red

Nature Podcast

Our award-winning show features highlights from the week's edition of Nature, interviews with the people behind the science, and in-depth commentary and analysis from journalists around the world.