Carbides have attracted much attention owing to their interesting physical and chemical properties. Here, we systematically investigated global energetically stable structures of BeC2 in the pressure range of 0–100 GPa using a first-principles structural search. A transition from the ambient-pressure α-phase to the high-pressure β-phase was theoretically predicted. Chemical bonding analysis revealed that the predicted phase transition is associated with the transformation from sp2 to sp3 C-C hybridization. The electrical conductivity of the high-pressure phase changed from a metal (α-phase) to a narrow bandgap semiconductor (β-phase), and the β-phase had an inverted band structure with positive pressure dependence. Interestingly, the β-phase was a topological insulator with the metallic surface states protected by the time-reversal symmetry of the crystal. The results indicate that pressure modulates the electronic band structure of BeC2, which is an important finding for fundamental physics and for a wide range of potential applications in electronic devices.
Carbides draw much attention because of their unusual physical and chemical properties1,2,3. The transition between various carbides has long been a topic of interest because these phases have very different electronic properties, owing to the change from sp2 to sp3 carbon hybridization during the transition from graphite to diamond under sufficient pressure. Alkaline earth metal carbides have been the focus of research for more than half a century, and have been the subject of extensive theoretical and experimental studies of advanced functional materials4,5,6. Many alkaline earth metal dicarbides possess a linear crystal structure at normal condition. Previous experimental results show that magnesium dicarbide (MgC2) crystallizes in a tetragonal lattice with the space group P42/mnm7,8. Experimental and theoretical studies reported that the structure of CaC2 belongs to the I4/mmm space group. Recently, the structural evolution of CaC2 was determined using first principles calculations9. Especially, the high-pressure phase of CaC2 (Immm) of the intercalated graphite structure has a high superconducting critical temperature (Tc) of 7.9–9.8 K, which is comparable to Tc CaC6 (11.5 K)10,11,12,13,14,15. However, there are few studies exploring the crystal structure of BeC2, and its high-pressure structures are poorly understood, which will impede further exploration of this important class of material. A pressing task is to understand the crystal and electronic structures of this special matter under external pressure condition that may alter the underlying fundamental physics, which has motivated us to carry out the work.
In this study, we therefore explored the hitherto unknown high-pressure phase diagram of beryllium dicarbide via a first-principles swarm-intelligence structure search and established a comprehensive understanding of the high-pressure evolution of BeC2. Our work shows that BeC2 crystallizes in the monoclinic C2/m (α-phase) structure at ambient pressure and undergoes isostructural transitions to the β-phase at high pressure. We identified two thermodynamically stable phases associated with the transition from sp2 to sp3 C-C hybridization and predicted that the β-phase is a topological insulator. Our result represents a significant step toward understanding the structural and electrical behavior of alkaline earth metal carbides under extreme condition.
Result and Discussion
Crystal structures of BeC2
We performed structure prediction for BeC2 with variable-cell simulation cell sizes of 1–4 formula units at pressure of 0–100 GPa. At ambient pressure, our simulation reveals that the C2/m phase denotes as the α-structure/phase has lower enthalpies than all the other candidates, indicating that the α-structure is in the thermodynamic ground state. Over the whole pressure range, a new low-enthalpy structure denotes as the β-structure/phase is explored which has the same space group as the α-structure. The enthalpy-pressure relationship for the candidate structures is shown in Fig. 1. It has been seen that, for compressed BeC2, the ambient-pressure α-phase is the most stable structure below 56.7 GPa, but the β-phase becomes more favorable from 56.7 to 100 GPa. The pressure evolution of the unite cell volume of BeC2 in the α- and β-structure is depicted in inset of Fig. 1. The volume collapses about 9.4% around 56.7 GPa, indicating the first-order nature of the phase transition in BeC2. No imaginary frequency is observed throughout the whole Brillouin zone, which indicates the two novel phases are dynamically stable in the pressure region from this study.
The atomic arrangements of the competing structures are shown in Fig. 2. The calculated lattice constants of the ambient-pressure are calculated. The α-phase has a monoclinic symmetry, with a = 6.223 Å, b = 2.535 Å and c = 5.904 Å, β = 111.5° at ambient pressure. The Be and C atoms occupy Wyckoff 4i position in the unit cell with Be at (0.672, 0.5, 0.11), C at (0.431, 0.5, 0.227) and (0.467, 1.000, 0.374). The α-phase is similar to that the recently predicted for MgC2 of C2/m phase with carbon atoms polymerized into ribbon with a six-membered ring. Planes of Be atoms separate the hexagonal honeycomb layers of carbon atoms, which have the nearest distance with the outer C atom of the ribbon.
The β-phase has a monoclinic symmetry, with lattice parameters of a = 7.879 Å , b = 2.404 Å, c = 3.415 Å, and β = 84.12° at 56.7 GPa. The Be and C atoms occupy Wyckoff 4i positions in the unit cell with Be at (0.212, 0.5, 0.758), C at (0.420, 0.5, 0.9) and (0.418, 1.000, 0.637). It is obvious that the β-phase consists of bulky honeycomb-layer of carbon atoms separated by planes of Be atoms. Figure 3 shows the calculated lattice parameter versus pressure curves for the α- and β-phase. In α-phase, the slope of a is much more steeper than that of b and c. The results show that the inter-atomic forces among the interlayer molecules are weaker than the forces among in the intralayer molecules. For the β-phase, the slopes in different axes are nearly identical. In the inset of Fig. 3, the change of β-phase induced by the pressure is attributable to the elongating of the interlayer (a axis) and shortening of the intralayer (c axis) in α-phase, which also caused the well-organized six-ring carbon rings collapse into the puckered quasi 2-dimension graphite sheet. Due to the occurrence of graphite sheet between neighboring Be atomic layers, the β-phase can be regarded as one of the puckered graphite intercalation compounds.
Nonmetallization of BeC2
The calculated band structure and projected density of states (DOS) are shown in Fig. 4. The predicted overlap between the conduction and the valence bands shows the α-phase with sp2 hybridization is metallic, along with Be- and C- p electrons near the Fermi level. At 56.7 GPa, the β-phase characterized by sp3 hybridization becomes an insulator with a direct band gap of 0.03 eV (without spin-orbit coupling). Generally, metals under pressure exhibit decreasing interatomic distance and increasing metallic behavior, whereas BeC2 undergoes an unexpected and often counterintuitive pressure-induced metal-to-insulator transition. This surprising behavior can also be seen in Sodium which shows an optically transparent phase at 200 GPa16.
To examine the nature of these bonding states, we plotted the electron localization function (ELF) isosurfaces of BeC2 (Fig. 5)17. The α-phase contains a ribbon of six-member carbon rings, which have sp2-like properties. Each inner C atom forms three C-C covalent bonds and each outer C atom has one electron lone pair along with two C-C covalent bonds. The remaining 2pz electrons of the C6 ring form a delocalized π system. In the β-phase, the puckered honeycomb-layered structure lacks a system of delocalized π bonds with mobile electrons and has more localized electrons resulting in sp3 hybridization. Each C atom has one electron lone pair and three covalent C-C bonds, resembling diamond structure, accompanied by the appearance of an insulator state. The significant evolution of electronic structures from the sp2 to sp3 hybridization of the carbon atoms between the α- and β-phases is similar to the transformation of graphite to diamond under sufficient compression.
Band inversion and topological insulator state in β-phase
Remarkably, the size of the band gap of the β-phase depends positively on pressure in Fig. 6. This peculiar behavior stems from the requirement for symmetry thus forbidding the crossing inverted conduction minimum and valence maximum at Γ point; consequently, the conduction minimum and valence maximum will repel each other more strongly under higher pressure. It is important to check whether the β-phase is a topological insulator at high pressure. Due to the presence of inversion symmetry, the parity criterion can be used to justify the topological properties of the β-phase18,19,20. Following the method addressed in ref. 18, we calculated the parities δ1 at eight time-reversal invariant momenta (TRIMS) (i = 1–8) in three-dimensional Brillouin zone in Table 1. At 40 GPa, only the Γ point has negative parity, whereas the other TRIMS have positive parity. At 50 and 60 GPa, all TRIMS have positive parity. This can also be observed from the band structures of the β-phase around the critical pressure of the phase transition, as shown in Fig. 6. One can clearly observe that the parities of band edges are exchanged when above 40 GPa. The Z2 topological invariants can then be evaluated from the parities using the following equations,
The Z2 numbers are 1; (111) for 40 GPa and 0; (000) for 50 and 60 GPa. Together with the evolution of band energy as a function of pressure (Fig. 6), we can confirm that the β-phase is a strong topological insulator when below 40 GPa, whereas it is a normal insulator when above 50 GPa.
In summary, we have determined the high-pressure structural evolution of BeC2 by using the particle swarm optimization technique with first-principles electronic structure calculation. We predicted a pressure-induced phase transition from the α- to β-phase at 56.7 GPa. The structural, dynamical, and electronic properties of BeC2 under pressure were systemically investigated. The electrical calculation shows that the β-phase has an inverted band structure with a positive pressure dependence. Interestingly, the β-phase is a topological insulator with metallic surface states protected by the time-reversal symmetry of the crystal. These results show that pressure has a strong effect on the fundamental crystal and electronic structure of BeC2, and that pressure tuning of the electronic properties offers an effective tool to modulate a wide range of physical properties for its potential applications.
We performed structure predictions through a global minimization of free energy surfaces merging ab initio total-energy calculations implemented in CALYPSO (crystal structure analysis by particle swarm optimization) code21,22,23,24,25. The method has successfully predicted the high-pressure structures of various systems, ranging from elements to binary and ternary compounds26,27. The first-principles energetic calculations were carried out using density functional theory (DFT) with the Perdew-Burke-Ernzerhof of exchange-correlation as implemented in the Vienna ab initio simulation package (VASP)28. The projector augmented wave method has been adopted, with 2s2 and 2s2 2p2 treated as valence electrons for Be and C atoms, respectively29,30. For Brillouin zone integration, we used the Monkhorst-Pack scheme and checked convergence of ground state calculations with uniformly increasing k-point meshes for each structure31. We used cutoff energy of 800 eV for the expansion of the wave function into the plane-wave basis-set. Monkhorst-Pack k-point meshes with a grid of 0.03 Å−1 for Brillouin zone sampling were chosen to achieve the total energy convergence of less than 1 meV/atom. The phonon calculations were carried out by using a supercell approach as implemented in the PHONOPY code32. This method uses the Hellman-Feynman forces calculated from the optimized supercell through VASP. Ultrasoft pseudopotentials for C and Be were used, and convergence tests concluded that suitable calculation parameters are 80 Ry for kinetic energy cutoff, 20 × 20 × 12 k-point sampling mesh, and 5 × 5 × 3 q-mesh in Brillouin zone.
How to cite this article: Du, H. et al. Nonmetallization and band inversion in beryllium dicarbide at high pressure. Sci. Rep. 6, 26398; doi: 10.1038/srep26398 (2016).
This work was supported by the Natural Science Foundation of China under No. 11474125, 11274136, 51202084, 11104104, 11164031, 11404035,11374033 and the 2012 Changjiang Scholars Program of China, Changjiang Scholarand Innovative Research Team in University (IRT1132). The Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20131101120052), the Basic Research Fund of Beijing Institute of Technology (Grant No. 20141842004).
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/