Members of the dUTPase superfamily play an important role in the maintenance of the pyrimidine nucleotide balance and of genome integrity. dCTP deaminases and the bifunctional dCTP deaminase-dUTPases are cooperatively regulated by dTTP. However, the manifestation of allosteric behavior within the same trimeric protein architecture of dUTPases, the third member of the superfamily, has been a question of debate for decades. Therefore, we designed hybrid dUTPase trimers to access conformational states potentially mimicking the ones observed in the cooperative relatives. We studied how the interruption of different steps of the enzyme cycle affects the active site cross talk. We found that subunits work independently in dUTPase. The experimental results combined with a comparative structural analysis of dUTPase superfamily enzymes revealed that subtile structural differences within the allosteric loop and the central channel in these enzymes give rise to their dramatically different cooperative behavior. We demonstrate that the lack of allosteric regulation in dUTPase is related to the functional adaptation to more efficient dUTP hydrolysis which is advantageous in uracil-DNA prevention.
Allosteric characteristics of protein-ligand interactions present a research field with great traditions but also with key current interest1,2. Recent developments in the understanding of the manifestation of allosteric behavior within a given protein architecture lead to a shift from the classical view to a more subtle dynamic view of allostery. According to the classical view, allostery is based on a series of distinct structural changes leading to functionally different conformers of a given protein. However, several examples demonstrated that the allosteric behavior does not necessarily require switches between direct conformers3 but can be explained by alterations of side chain4 or main chain dynamics5 or by a shift in the distribution of preexisting protein conformations6. In the present study, we set out to investigate the manifestation of allostery within the superfamily of dUTPases. The superfamily comprises the dUTPase, dCTP deaminase (DCD) and the bifunctional dCTP deaminase-dUTPase (DCD-DUT) enzymes that produce dUMP, the obligatory de novo dTTP synthesis precursor from either dUTP or dCTP, respectively (Fig. 1).
The removal of dUTP from the cellular dNTP pool is also a vital function of dUTPases. These enzymes thus play an important role in the maintenance of the pyrimidine nucleotide balance and genome integrity7,8,9,10,11,12. dUTPase and DCD(-DUT) share a common homotrimeric structural core13,14,15,16 (Fig. 2a). The three subunits form a central channel and three equivalent active sites at the intersubunit clefts (Fig. 2a). This intricate quaternary structure intuitively suggests the possibility for allosteric control within the enzyme. In effect, the allosteric communication between the active sites of DCD family enzymes has been investigated in several species15,17,18,19 and was found to operate through the central channel15,19. The cooperative conformational change in these enzymes occurs in a loop (referred to as allosteric loop from now on) located at the interface of the nucleotide binding site and the central channel (Fig. 2b). The allosteric loop can adopt the mutually exclusive active and inactive conformations. The conformational change of one loop facilitates the same conformational change in the other two loops of the trimer due to steric hindrance within the central channel15,19. This mechanism thus conforms to the classical view of allostery.
dUTPases, the other family that belongs to the dUTPase superfamily, display an even more intricate interaction pattern between their subunits than DCDs do. The C-terminal arm of dUTPases in almost all cases reaches across the trimer to the remote active site and therefore, all three subunits provide conserved residues to each active site16. This structure inspired the proposition that allosteric communication between the active sites of dUTPases should also exist20,21,22. Crystallographic observations in the human dUTPase suggested that some allosteric effect must help the release of the dUMP product20. Another study investigating the nature of the central channel of dUTPases found considerable difference in hydropathy between eukaryotic and prokaryotic dUTPases21. It was proposed that allostery can emerge through the hydrophilic central channel in eukaryotic dUTPases. A later NMR study suggested that the Drosophila enzyme exhibits cooperativity in both substrate and product binding based on signal intensity titrations well above the Kd of the respective complexes22. In the EIAV (Equine Infections Anemia Virus) enzyme, a Trp at the central channel senses the nucleotide-bound states of the active site23 corroborating the potential of active site communication through the central channel. On the other hand, detailed kinetic analyses of dUTPases from various species (human24, E. coli25, EIAV23, Plasmodium falciparum26) failed to directly detect any cooperative behavior in the enzymatic mechanism.
The cooperativity in DCD is best observed when dTTP, its feedback inhibitor binds to the active site. As the accommodation of the additional metal group on the thymine ring is possible only in the inactive conformation15,19, the shift in the equilibrium between the active and inactive conformational states and the cooperative behavior is more pronounced in the presence of dTTP15,19,27. The substrate binding pocket of dUTPases, however, does not accommodate other bases than uracil with considerable affinity20,25,28. This property of dUTPases may make it difficult to recognize any allosteric behavior. The inherent allosteric potential in proteins may only appear by mutations that shift the distribution of the various conformational states6,29. Therefore, we designed mutations to access inactive conformational states in dUTPase potentially mimicking the ones observed in DCD and DCD-DUT. To this end, we created covalently linked human dUTPase pseudoheterotrimers (called hybrids henceforth) in which the active sites could be turned off selectively (Fig. 2c). We studied how the interruption of different steps of the enzyme cycle in one active site of the hybrid affects the activity of the non-mutated active sites using various enzymatic and structural biology approaches. Our experimental results combined with the comparative analysis of the structural features of dUTPase superfamily enzymes reveals an intriguing trade-off between regulation and efficiency, two ways of functional adaptation to distinct metabolic functions.
Establishment and enzyme activity of asymmetric dUTPase hybrids
Mutations introduced to a homooligomeric protein appear in each subunit as the oligomer is assembled from identical monomers (Fig. 3a). To generate hybrid enzymes of the human dUTPase (hDUT), we therefore needed to create a covalently linked pseudohomotrimer (termed WWW) in which each subunit could be exchanged to selectively contain the desired mutation (Fig. 3b). The WWW construct was assembled from the previously described sensor-bearing hDUTF158W human dUTPase24,30 monomers (W) connected with flexible peptide linkers31 (see Online Methods and Supplementary Table 1). We previously used the F158W substitution to follow the enzymatic reaction steps using the intrinsic fluorescent signal of tryptophan 15824,32,33. In this position, a conserved aromatic residue overlaps with the uracil ring of the substrate in every dUTPase33. The electrostatic interaction between the tryptophan and uracil modifies the fluorescence properties of the tryptophan residue in a conformation-sensitive manner allowing the monitoring of the enzymatic cycle. The WWW enzyme could be expressed and purified (Fig. 3c) with similarly high yield as the homotrimer. We introduced each further mutation into the WWW scaffold by exchanging one or more of the W cassettes.
The sequence of the linker (ASGAGGSEGGGSEGGTSGATG/SL/Q) was borrowed from a study in which it was used for the same purpose: genetic manipulation of individual subunits. The visible N- and C-terminal amino acids of hDUT can be found 28.62 Å apart in the 2HQU structure. The 22 amino acid linker spans 77 Å when maximally streched. The flexible N-terminal 23 amino acids add another 80.5 Å streched length to the linker. Therefore, we anticipated that this linker does not restrict the wild-type dynamics of the hDUT structure. To test whether the linkers influence the enzymatic properties of the WWW enzyme, we applied transient kinetic analysis using the fluorescent signal of W158. The kinetic parameters of substrate binding and hydrolysis as well as the characteristic fluorescence changes during the course of the reaction remained similar in WWW to that measured in hDUTF158W (Supplementary Fig. 1, Table 1). We also performed limited tryptic digestion of the covalent enzyme to cleave the linkages between the subunits. The cleaved enzyme displayed basically identical steady-state and transient kinetic properties to that of the covalently linked one (Supplementary Fig. 2). We concluded that the linkers do not influence the enzymatic mechanism and thus the covalent enzyme is suitable for further investigations.
Four different hybrid enzymes were subsequently created to investigate the possible allosteric effects of conformational changes upon substrate binding, hydrolysis or product release (Fig. 4a).
To investigate the allosteric effect of a possible global conformational change upon substrate binding, we created an active site that is unable to accommodate the uracil ring (Supplementary Fig. 3a) and is thus defective in substrate binding and any conformational change coupled to it. Control experiments with the homotrimeric form of the A98F mutant (hDUTF158W, A98F) confirmed that it could not bind the substrate and was entirely inactive (Supplementary Fig. 3b–f). We introduced this mutation to the covalent construct to obtain WWF.
The following constructs were designed to investigate whether conformational changes occurring upon hydrolysis or product release are necessary to be transmitted to neighboring active sites for the global activity of the trimer.
In the WWN and WNN constructs, the conserved catalytic Asp from the third conserved motif was changed to Asn (Supplementary Fig. 3g) in one or two active sites, respectively. This Asp/Asn substitution has been described to reduce the catalytic activity close to zero while the substrate binding properties do not change34. We also tested the enzymatic properties of hDUTD102N,F158W and found that the catalytic activity decreased below the detectable level (<0.002 s−1) both under steady-state and single turnover conditions while the substrate binding properties remained unaffected compared to hDUTF158W (Supplementary Fig. 3h).
In the WWS enzyme, we removed the C-terminal P-loop-like motif of the last subunit of the pseudoheterotrimer. This conserved motif interacts with the γ-phosphate of dUTP and stacks over the uracil ring to orient the catalytic apparatus and stabilize the transition state30,32,33,35. The P-loop-like motif is only present in dUTPases and is missing from DCDs or DCD-DUTs. Its removal results in major decrease (~720 fold) of the catalytic constant and minor (~3 fold) increase in the dissociation constant of the enzyme-substrate complex30.
dUTPase active sites work independently from each other
Potential allosteric interactions within the hybrids WWN, WNN, WWS and WWF were analyzed using the combination of steady state and transient kinetic measurements. All constructs proved to be active indicating that the arrest of the enzyme cycle in a given active site does not compromise the enzymatic turnover in the others. Steady-state activity titrations of all hybrid enzymes exhibited Michaelis-Menten kinetics (Fig. 4b). The maximal initial velocities (Vmax) decreased proportionally with the number of inactivated sites, i.e. WWN, WWF and WWS displayed about 2/3, while WNN displayed approximately 1/3 activity compared to WWW (Fig. 4c, Table 1). This indicates that the activity per working subunit is unaltered in the hybrid enzymes. The Michaelis constants did not change considerably compared to the WT (Table 1). Single turnover stopped-flow measurements showed that the kinetic mechanism of the asymmetric hybrids is identical with that of the control WWW (Supplementary Fig. 4). The kobs for substrate binding and the single turnover rate constants (kSTO) remained unaltered (Table 1, Fig. 4c). This implies that the observed decrease in the steady-state activity is only due to the decreased active site concentration.
The kinetics of substrate binding to the hybrid enzymes was also investigated under pseudo first order conditions. A large part of the time courses got lost in the dead-time of the instrument which hindered the determination of the rate constants. The total signal change, however, could be used to determine the dissociation constants (Kd) of the enzyme-dUTP complexes (Fig. 4d). The obtained Kd-s were similar to that of the WWW-dUTP complex (Table 1).
In summary, a global active to inactive conformational transition observable in DCDs could not be identified in dUTPase even in conditions potentially mimicking the asymmetry in a partially dTTP-saturated DCD enzyme (Fig. 2c). On the contrary, Fig. 4c clearly indicates that the active sites turn over independently from each other. In case of a cooperative transition to a global inactive state we would expect inactivity following the first turnover or non-proportional activity decrease in the hybrid enzymes containing one or two defective active sites.
The conformational flexibility of human dUTPase is restricted by Mg2+ binding to the central channel
The conformational changes resulting in the observed cooperative behavior is transmitted through the central channel in DCD family enzymes. We therefore investigated the structural features of the channel possibly responsible for the lack of conformational transmission in dUTPase. The site of cooperative conformational change of DCD(-DUT) enzymes corresponds to one of the two suggested Mg2+ binding sites in the human dUTPase20,36 (Asp95, Fig. 5a). In contrast, no metal binding to DCD(-DUT) enzymes has been reported.
To evaluate the role of Mg2+ binding to the central channel of hDUTF158W, we conducted in solution structural investigations in the presence and absence of Mg2+. The near-UV CD spectra showed considerable changes upon the addition of Mg2+ to the apo hDUTF158W indicating that the metal ion binds to the enzyme and modifies its structure (Fig. 5b). The largest signal change was observable at 285 nm probably yielded by the rearrangement of Tyr residues (Fig. 5a). The far-UV CD spectra, on the other hand, showed only minor changes upon Mg2+ addition (Fig. 5b inset) implying that metal binding may not induce major changes in the secondary structure. The WWW enzyme showed similar spectral changes to hDUTF158W upon the addition of Mg2+ (Supplementary Fig. 5a,b).
The thermal denaturation of hDUTF158W could be described with a two-state equilibrium model indicating that the heat-induced unfolding of the trimer happens in one step, without a significantly populated intermediate state of dissociated and folded monomers37 (Fig. 5c). In the absence of Mg2+, we observed a slight but reproducible decrease in the melting temperature (Tm) (Fig. 5c) suggesting that the stability of the enzyme is slightly decreased in the absence of Mg2+ similarly to what was found in the D. melanogaster dUTPase38. The covalent WWW enzyme produced a more complicated melting curve (Supplementary Fig. 5c). However, the stabilization effect of Mg2+ could also be observed.
To test the potentially increased flexibility of hDUTF158W in the absence of Mg2+, we performed limited trypsinolysis. hDUTF158W was highly sensitive to tryptic digestion in the absence of Mg2+ (Fig. 5d and Supplementary Fig. 6) whereas the control Mycobacterium tuberculosis dUTPase (mtDUT) that does not contain Mg2+ binding sites in its central channel (Fig. 6f) was not (Fig. 5d and Supplementary Fig. 6). Following the expected cleavage of the flexible N- and C-termini32, the remaining enzyme core – which is otherwise stable for long time – disappeared within an hour (Fig. 5d). In case of the mtDUT, the enzyme core remained stable during the one our experiment. This phenomenon indicates that the quaternary structure of hDUTF158W is significantly more flexible in the absence than in the presence of Mg2+.
Structural comparison of dUTPase superfamily enzymes reveals trade-off in conformational flexibility and active site specificity
To understand the structural basis of the mechanistic differences within the dUTPase superfamily, we compared the central channel, the region of the allosteric loop and the nucleobase binding region in DCDs and dUTPases (Fig. 6).
The amino acids responsible for the binding of the nucleobase are located around motif 3 (Fig. 6a) at the N- and C-terminal parts of the β-hairpin accommodating the nucleoside (Fig. 6b). The N-terminal few amino acids of the β-hairpin overlap with the allosteric loop in the DCD family. We found that this region is highly diverse in size and amino acid composition within the superfamily (Fig. 6a,b).
In eukaryotic dUTPases, the loop is shorter by 2 or 3 amino acids than in DCDs resulting in a tighter uracil binding cleft. In these enzymes, mostly main chain atoms establish hydrogen bonding interactions with the nucleobase, which was proposed to contribute to their specificity for uracil20. The very same loop confers the Mg2+ binding site facing the central channel (Fig. 6c, Fig. 5a).
In retroviral dUTPases (EIAV shown as the representative), the loop is even shorter than that of the Mg2+ binding site-bearing eukaryotic dUTPases (Fig. 6a,b).
The allosteric loop of prokaryotic dUTPases is of the same length as that of DCDs. However, its amino acid composition is different (Fig. 6a) resulting in a tighter central channel mainly due to the LV/SM/SP/AP peptides protruding in it (Fig. 6a,b). The conformational flexibility of the channel is restricted by the hydrophobic interactions of the modified allosteric loop (Fig. 6d) or by a conserved Pro (Fig. 6e). In DCDs, the conserved Ala of the allosteric loop engages in H-bonding with the oxo group of the substrate uracil. If thymine is bound to the active site, the HVTA peptide containing this Ala moves into the channel (cf. Fig. 2b). In contrast, a conserved Asn plays the same H-bonding role in prokaryotic dUTPases but it resides in a conformationally restricted peptide (Fig. 6a,d,e).
The sequence and structural comparison with DCD enzymes reveals that the various evolutionary branches of dUTPases possess an altered or shortened allosteric loop which coincides with the conformational stabilization of the central channel. Interestingly, most of the observed alterations contribute to the specificity for dUTP at the same time. We propose that the central channel of dUTPases features increased stability at the cost of lacking the potential for mediating cooperativity as observed in DCDs. Apparently, the same structural element of the active site is responsible for substrate specificity and for the communication through the central channel.
Allosteric enzyme regulation is one of the general means of controlling biochemical processes. The appropriate concentration and balance of dNTPs for DNA synthesis and repair is commonly regulated by both homotrop and heterotop allosteric mechanisms39,40. Feedback inhibition by dTTP in two of the three dUTPase superfamilies, DCDs and the bifunctional DCD-DUTs (Fig. 1), seems to be important to maintain the appropriate dCTP/dTTP ratio15,19. The feedback inhibitor dTTP binds to the active sites which communicate with each other within the homotrimer resulting in an all-or-none inhibition pattern. This is a more complicated and more efficient inhibition mechanism than simple competitive inhibition due to the fact that 1 dTTP molecule elicits the complete inhibition of 3 active sites. Interestingly, the activity of the non-homologous dCMP deaminases is also modified by dCTP and dTTP with intricate regulation pattern involving cooperativity41,42,43. Probably, this kind of regulation is important in maintaining the correct dCTP/dTTP ratio44.
We attempted to detect allosteric behavior in dUTPases by engineering hybrid enzymes to restrict putative allosteric transmission between active sites at various stages of the enzymatic cycle. Interestingly, however, the enforced asymmetry in the dUTPase trimer did not elicit any instance of cooperative behavior despite the fact that dUTPases have the most intertwined trimeric structure of all within the dUTPase superfamily. We determined that i) the active sites work independently from each other; ii) Mg2+ binding in the central channel reduces the flexibility and increases the thermal stability of the quaternary structure; iii) the allosteric loop that connects the active site to the central channel is conformationally restricted in dUTPases compared to DCD family enzymes. This phenomenon is interrelated with structural solutions for increased dUTP specificity in every case.
It is common in enzyme evolution that mutations in flexible active site loops are responsible for altered substrate specificity45. Since active sites are often located at intersubunit/interdomain clefts, these flexible loops have a potential to mediate allosteric communication between the active sites. In our case, it seems that the specialization for a single substrate results in the loss of allosteric communication. The shorter/less flexible allosteric loop compared to that of DCDs and DCD-DUTs is related to increased dUTP specificity (Fig. 6). Another dUTPase “invention” is the C-terminal P-loop-like motif that discriminates against dUDP and makes dUTP hydrolysis more efficient by several orders of magnitude than DCD-DUTs30. The gain of specificity together with the enhancement of the catalytic power represent features that make dUTPases significantly more powerful in dUTP breakdown as compared to DCD-DUTs. This advance may be necessary to avoid the appearance of the non-canonical uracil base in DNA that induces the activation of DNA repair mechanisms upon non-physiological uracil accumulation leading to severe to fatal consequences for the cell46,47,48. The cooperative allosteric behavior in DCDs and DCD-DUTs, on the other hand, make these enzymes suitable for the regulation of the nucleotide pool. We propose that the trade-off between cooperativity and specificity in the dUTPase superfamily represents instances of adaptation to the distinct roles of dUMP production for dTTP synthesis and dUTP elimination for uracil-DNA avoidance, respectively.
Molecular biology products were from New England Biolabs (US) and Fermentas (Canada), electrophoresis and chromatography reagents were from Bio-Rad (US) and Qiagen (Netherland). Phenol red was from Merck (Germany). dUMP, dUDP and α,β-imido-dUTP (dUPNPP) was from Jena Bioscience (Germany), dUTP and other chemicals were from Sigma–Aldrich (US).
Cloning and mutagenesis
Site-directed mutagenesis was performed by the QuikChange method (Stratagene) and was verified by sequencing. The enzyme conferring a tryptophan sensor in the active site (hDUTF158W) was used as wild-type24,32,33. The following mutants were created within this construct: Asp102 to Asn (hDUTF158W,D102N) and Ala98 to Phe (hDUTF158W,A98F). Mutagen forward and reverse primers are presented in Supplementary Table 1. The covalent wild type enzyme (WWW) was created by genetic engineering. hDUTF158W was amplified with primers encoding linkers and various restriction sites (Supplementary Table 1) to create the three subunits of WWW. The subunits were cloned to pET45b plasmid as individual restriction cassettes. Covalent pseudoheterotrimers (hybrids) were then created by changing one or two of the wild type cassettes in WWW to mutant one(s).
Protein expression and purification
Expression and purification of noncovalent human dUTPase proteins were done as described previously in Varga et al. FEBS Letters32. Covalent dUTPase pseudotrimers were expressed and purified similarly, except that BL21 Rosetta (pLysS) cells (Novagen) were used instead of BL21. The expression and purification of the His-tagged Mycobacterium tuberculosis dUTPase (mtDUT) was done based on Varga et al. BBRC49. The protein concentration was measured using the Bradford method (Bio-Rad Protein Assay) and by UV absorbance. Extinction coefficients were calculated based on the amino acid sequence using the ProtParam tool (http://web.expasy.org/protparam/). Extinction coefficients for the proteins were: λ280 = 16055 M−1cm−1 for the hDUTF158W, hDUTF158W,D102N and hDUTF158W, A98F; λ280 = 48290 M−1 cm−1 for the WWW, WWF, WWN and WNN and λ280 = 42790 M−1 cm−1 for the WWS construct. Protein concentration is given in monomer/subunit concentration in every case. All measurements were carried out in a buffer comprising 20 mM HEPES pH 7.5, 100 mM NaCl, 2 mM MgCl2 and 2 mM ß-mercaptoethanol (“assay buffer”) if not stated otherwise.
Steady-state colorimetric dUTPase assay was performed as described in Varga et al. BBRC49. This phenol red indicator assay was used to detect the protons released in the dUTPase reaction. 0.01–1 μM protein was used for the dUTPase assay in a buffer containing 1 mM HEPES pH 7.5, 100 mM KCl, 40 μM phenol red and 5 mM MgCl2. A Specord 200 spectrophotometer (Analytic Jena, Germany) and 10 mm path length thermostatted cuvettes were used at 20 oC and absorbance was recorded at 559 nm. The initial velocity was determined from the first 10% of the progress curves. Initial velocities were plotted against substrate concentration and the results were fitted with the Michaelis–Menten equation.
Fluorescence spectra and intensity titrations were recorded on a Jobin Yvon Spex Fluoromax-3 spectrofluorometer in the assay buffer at 20 oC. Trp fluorescence was excited at 297 nm, emission spectra were recorded between 320–400 nm while the fluorescence intensity titrations were detected at 345 nm. Additional fluorescence or inner filter effect imposed on the measured intensities during the titration experiments were corrected by subtracting the corresponding buffer spectra. Titration data were fitted with the equation describing 1:1 stoichiometry for the dissociation equilibrium assuming no cooperativity:
where x is the ligand concentration and y is the fluorescence intensity, s = y at x = 0, A is the amplitude of the fluorescence intensity change, c is the enzyme concentration and K is the dissociation constant of the ligand complex.
Thermal shift assays were carried out on an Mx3000P® QPCR System (Agilent Technologies Company). Thermal shift reactions were performed in a 96-well thin-wall microplate in a total volume of 25 μl containing 500× diluted Sypro® Orange dye. Samples were heated from 25.0 to 80.0 oC. The speed of heating was 1 °C/minute. The protein concentration of hDUTF158W was 0.8 mg/ml in the measurements, while the WWW enzyme was used at 2 mg/ml concentration. To compensate for the difference in the ionic strength between the samples with and without MgCl2, NaCl was added according to Equation 2:
where I is the ionic strength, ci is the concentration, zi is the charge of the particular ion and i is the index of summation.
The raw data of the heat-induced unfolding monitored by fluorescence emission were converted to the apparent fraction of native protein FN, according to Equation (3):
where θ is the observed spectroscopic signal at temperature T, θN and θU are the intercepts and mN and mU are the slopes of the pre- and post-transitional base lines of the raw data, respectively. The FN vs. T plot was converted to the FU vs. T plot by using the FN + FU = 1 equation, where FU is the fraction of unfolded protein. The FU vs. T plot was then fitted with the Boltzmann (Equations (4)) the midpoint of the transition
where A1 and A2 are the pre- and post-transitional base lines and x0 is the transition midpoint.
Circular dichroism measurements
CD spectra recording was carried out in a JASCO 720 spectropolarimeter at 20 oC using a quartz cuvette with 1 mm (far UV) or 10 mm (near UV) path length. Far UV and near UV spectra were recorded at 200–250 nm or 250–300 nm, respectively. All protein containing spectra were corrected by subtracting the corresponding buffer spectra.
Fast kinetics experiments
Fluorescence stopped-flow measurements were carried out at 20 oC using an SX-20 stopped-flow apparatus (Applied Photophysics, UK) as described previously24. Equal volumes (50 μl) of dUTPase enzyme and dUTP solutions were mixed and 8 traces were recorded and averaged for each time course. Under single turnover conditions, a triple exponential equation was fitted to the averaged traces to determine the catalytic constants based on Tóth et al. JBC24. For the determination of binding rate constants, the ligand titration was performed under pseudo-first order conditions. The observed rate constants for the two binding steps described previously (collision complex formation and isomerisation24) were determined by fitting double exponential equations. Where exponential equation for the first part of the time course could not been fitted due to the large signal loss in the dead time, the Kd was estimated by plotting the amplitudes of the fluorescence decrease against ligand concentration followed by fitting a hyperbole.
The limited tryptic digestion of dUTPases was performed at 37 oC using 0.5 mg/ml protein concentration and 1:20 trypsin: dUTPase ratio in assay buffer also containing either 0.1 mM EDTA or 5 mM MgCl2. The tryptic digestion was terminated by the addition of 1 mM PMSF to the samples taken at different time points. The time dependence of the trypsinolysis was analyzed on SDS-PAGE. Limited trypsinolysis in the presence of 1 mM α,β-imido-dUTP was performed likewise in the same buffer either with or without Mg2+. SDS-PAGE gels were analyzed by densitometry with the UVIdoc software.
The cleavage of the linkers of the WWN covalent enzymes was performed at 25 °C using 0.8 mg/ml protein concentration and 1:500 trypsin: dUTPase ratio in the assay buffer also containing 1 mM α,β-imido-dUTP for the protection of the C-terminus32 and 5 mM MgCl2. The digestion was terminated by the addition of 1 mM benzamidine hydrochloride after 5 minutes. The sample was dialyzed against assay buffer containing 1mM benzamidine and 5 mM MgCl2 to remove α,β-imido-dUTP. The control sample was treated similarly without the addition of trypsin. The trypsinolysis product, the W/W/N heterotrimer, was analysed on SDS-PAGE and by enzymatic assays.
Data fitting and statistical analysis
Data fitting was performed using Origin 7.5 (OriginLab Corp., Northampton, MA) or the stopped-flow software. Error bars represent the standard deviation of the mean of several measurements depending on the type of assay (detailed at each Method section and in the legends of the Figures and Tables).
How to cite this article: Szabó, J. E. et al. Trading in cooperativity for specificity to maintain uracil-free DNA. Sci. Rep. 6, 24219; doi: 10.1038/srep24219 (2016).
This work was supported by the Hungarian Scientific Research Fund [OTKA K115993, NK 84008, K109486]; the MedinProt program of the Hungarian Academy of Sciences; the International Centre for Genetic Engineering and Biotechnology [ICGEB CRP/HUN14-01] and the European Commission FP7 Biostruct-X project [contract No. 283570]. Funding for open access charge: Hungarian Scientific Research Fund.
About this article
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/