A considerably small fraction of approximately 60–100 proteins of all chloroplast proteins are encoded by the plastid genome. Many of these proteins are major subunits of complexes with central functions within plastids. In comparison with other subcellular compartments and bacteria, many steps of chloroplast protein biogenesis are not well understood. We report here on the first study of chloroplast-localised trigger factor. In bacteria, this molecular chaperone is known to associate with translating ribosomes to facilitate the folding of newly synthesized proteins. Chloroplast trigger factors of the unicellular green algae Chlamydomonas reinhardtii and the vascular land plant Arabidopsis thaliana were characterized by biophysical and structural methods and compared to the Escherichia coli isoform. We show that chloroplast trigger factor is mainly monomeric and displays only moderate stability against thermal unfolding even under mild heat-stress conditions. The global shape and conformation of these proteins were determined in solution by small-angle X-ray scattering and subsequent ab initio modelling. As observed for bacteria, plastidic trigger factors have a dragon-like structure, albeit with slightly altered domain arrangement and flexibility. This structural conservation despite low amino acid sequence homology illustrates a remarkable evolutionary robustness of chaperone conformations across various kingdoms of life.
The transformation of the one-dimensional genetic information into complex protein structures is a challenging task for cells. Polypeptides that emerge vectorially from translating ribosomes cannot fold completely to the native conformation unless the polypeptide chain is fully synthesized and released from the ribosome. During this process, nascent polypeptides are highly susceptible to premature folding, misfolding, and aggregation1. In addition, polypeptides synthesized on cytosolic ribosomes and destined for organelles need to be recruited early and kept in an unfolded state to facilitate their translocation across subcellular membranes2. Thus, cells have acquired various factors associating with translating ribosomes to assist protein maturation, to prevent premature folding, and to mediate membrane targeting for translocation3, 4. Many of these factors belong to the abundant and structurally diverse family of molecular chaperones, which act at all stages of a proteins life span to promote a balanced protein homeostasis1. Across all kingdoms of life, specific molecular chaperones associate with translating ribosomes to guide the initial steps of de novo folding of nascent polypeptides5. Further downstream, other chaperones take over nascent polypeptides to assist folding and final maturation. In bacteria, the ATP-independent trigger factor (TF) is the predominant chaperone that transiently binds to ribosomes. This association is mediated by the ribosomal protein Rpl23, which positions TF next to the ribosomal exit tunnel for early binding of nascent polypeptides6. A comprehensive analysis of TF substrates indicated that the chaperone binds most newly translated polypeptides7. In fact, E. coli cells contain a two- to three-fold molar excess of TF relative to ribosomes, thus providing sufficient chaperones to act on all translating ribosomes6, 8,9,10.
High-resolution structural analyses of various bacterial TF molecules showed that TF adopts a unique elongated conformation resembling a “crouching dragon” with three domains11. The N-terminal domain is responsible for ribosome association and contains an essential signature motif for this interaction. This domain further supports the C-terminus to shape the backbone structure of TF. The C-terminal domain is the main module of TF and possesses in vitro chaperone activity on its own12. This domain folds back to interact with the N-terminus and forms the backbone of TF with an open cavity and two protruding arms. Within the amino acid sequence, both termini are separated by the peptidyl–prolyl cis–trans isomerase (PPIase) or so-called head domain, which is situated opposite of the N-terminus in the three-dimensional structure. In contrast with other molecular chaperones, which contain one specific substrate binding site, TF seems to use multiple sites across the entire cavity for both hydrophobic and hydrophilic substrate interactions11. Thus, a bound substrate is accommodated in a protective environment in the interior of TF to prevent misfolding and aggregation. Various structural data further indicated that the protein is rather flexible, which seems essential for binding of the diverse set of substrates and for ribosome association6. Bacterial ribosomes are bound by the monomeric form, while non-ribosome-bound TF shows a fast monomer–dimer equilibrium with a half-life of the dimer of ∼1 s and a KD of ∼1–2 μM13, 14. For the function of the TF dimer, opposing data have been reported. On the one hand, it was hypothesized that this dimer serves as an inactive storage form. On the other hand, it was found that such dimers contribute to the stabilization of unfolded substrate species14,15,16.
In eukaryotes, chloroplasts are the only subcellular compartments that appear to contain molecular chaperones of the trigger factor family. Chloroplasts confer photoautotrophy to plants and algae. These organelles contain their own semi-autonomous genome, which encodes for approximately 60–100 proteins of all ~3000 chloroplast proteins. Most of the chloroplast-encoded proteins are major subunits of central protein complexes involved in gene expression and photosynthesis17. Since chloroplasts are thought to have evolved from a photosynthetically active cyanobacterium more than a billion years ago, many components of the plastidic gene-expression machinery still resemble their cyanobacterial counterparts18. For example, chloroplasts contain 70 S ribosomes each consisting of a small 30 S and a large 50 S subunit19,20,21,22. Consistently, many components of the chloroplast protein folding and quality control machinery are orthologous to the respective system in prokaryotes23. Importantly, the chloroplast gene-expression apparatus also acquired novel mechanisms that are not found in cyanobacteria, which most likely serve the orchestrated expression of the nuclear, mitochondrial, and chloroplast genomes.
While bacterial TF has been studied extensively and might be the best understood molecular chaperone in the literature, no experimental evidence about the function and biophysical properties of plastidic trigger factor exists to date. Here, we describe biophysical and structural properties of plastidic trigger factors from Chlamydomonas (C. reinhardtii) and Arabidopsis (A. thaliana). Despite a high sequence variance among different chloroplast trigger factor species, small-angle X-ray scattering (SAXS) experiments indicated that the eukaryotic chaperones have an architecture strikingly similar to their bacterial counterpart. Yet, chloroplast trigger factors also show distinct molecular features that might have evolved to meet the functional requirements of the chloroplasts.
Results and Discussion
The chloroplast trigger factor family displays low sequence conservation
Genes orthologous to the bacterial TF can be found in all plastid-containing algae and plants but are absent in non-photosynthetic eukaryotes. Thus, it has been postulated that algae and plants encode for a chloroplast isoform24. To gain a first understanding of these chloroplast-localised chaperones, we compared plastidic trigger factor proteins from C. reinhardtii and A. thaliana with the isoform from E. coli. For simplicity and consistency with previous studies, the full-length chloroplast proteins will be abbreviated TIG1, and the E. coli form will be abbreviated EcTF. Excluding the N-terminal chloroplast transit sequence of the TIG1 proteins, chloroplast and bacterial isoforms have a similar overall length and contain the three typical TF domains (i.e., N-terminal ribosome-binding domain, PPI domain, and C-terminal chaperone domain) (Fig. 1a and b). However, the amino acid composition displays only ~18% sequence identity and <30% sequence similarity between the chloroplast TIG proteins and EcTF. Similarly, CrTIG1 and AtTIG1 also share sequences of only 24% identity and 35% similarity (Fig. 1c). Such low sequence conservation between two phyla is remarkable for molecular chaperones where at least some domains tend to be highly conserved among orthologues25, 26. Our phylogenetic analysis of various trigger factor sequences confirmed this high variability among orthologous forms from bacteria, algae, mosses and higher plants. Interestingly, TIG1 orthologues from diatoms and red algae show a closer homology to prokaryotic TFs, while TIG1 proteins from green algae, mosses, and higher plants fall into a separate clade. Within the green lineage, low sequence conservation is observed between chlorophyte and streptophyte TIG1 proteins (Fig. 1d). It might be speculated that the high variety among TIG1s from the green lineage constitutes an evolutionary adaptation of these proteins according to their task during protein biogenesis. Except for the moss P. patens, all investigated green algal and plant genomes encode only one full-length TIG1 species (Supplementary Table S1). Interestingly, mosses and higher plants seem to encode additional, truncated forms of a trigger factor. We propose to term these orthologous forms TIG2, as transit-peptide analyses predict a chloroplast localisation as well. TIG2 proteins seem to contain only the N-terminal ribosome binding domain. Since the N-terminal domain of bacterial TF is the major site for ribosome binding and exhibits some chaperone activity6, an independent or distinct contribution of this truncated variant to protein biogenesis can be envisioned. It has been shown previously by size exclusion chromatography (SEC) and mass spectrometry of A. thaliana chloroplast extracts that TIG2s are expressed and that they co-migrate in high-molecular weight fractions together with TIG1 and plastid ribosomes27. Phylogenetic comparison of TIG1 and TIG2 sequences reveals a clear separation of the two species (Supplementary Figure S1). TIG2 displays a closer relation to the full-length bacterial orthologues compared with TIG1. Thus, it is possible that, during evolution, two trigger factor orthologues were inherited from cyanobacteria and that TIG2 was subsequently lost in algae. Alternatively, TIG2 might have been acquired through horizontal gene transfer after separation of the algal and land-plant lineages.
Most TIG1 is soluble but also thylakoid-associated
For a biophysical comparison of chloroplast CrTIG1 and AtTIG1 with EcTF, mature proteins lacking the N-terminal chloroplast transit peptide were cloned for overexpression and affinity purification followed by subsequent SEC. This yielded highly pure and fully soluble proteins migrating with respective apparent molecular weights of 56 kDa (EcTIG1), 58 kDa (CrTIG1), and 57 kDa (AtTIG1), which is slightly larger than their theoretical molecular weights (i.e., 48.2 kDa (EcTF), 53.7 kDa (CrTIG1), and 53.2 kDa (AtTIG1)) (Fig. 2a). To test if the transit-peptide cleavage sites of CrTIG1 and AtTIG1 proteins were correctly predicted, purified proteins and cell lysates of C. reinhardtii and A. thaliana were separated by SDS-PAGE and analysed by immunoblot (Fig. 2b). Both endogenous and purified TIG1 migrated with the same velocity supporting the correct assumptions of transit-peptide cleavage sites.
To confirm that CrTIG1 is indeed a chloroplast-localised protein, we performed subcellular fractionation experiments. C. reinhardtii cells were fractionated into mitochondria, chloroplasts, stroma, thylakoids, and thylakoid-associated low-density membranes (LMs)28. The purity and degree of enrichment were tested with antibodies against chloroplast HSP70B, stromal CGE1, thylakoid membrane-associated CF1β, and mitochondrial carbonic anhydrase (CA). CrTIG1 displayed a distribution similar to the chaperone HSP70B26 and was found mainly in the soluble stroma fraction of chloroplasts but is also associated to some extent with LMs and thylakoid membranes (Fig. 2c). Since a major fraction of bacterial TF is ribosome-bound6, the distribution of chloroplast ribosomes was visualised with an antibody directed against a protein of the 50 S subunit, PRPL1. Similar to CrTIG1 and HSP70B, ribosomes were enriched mostly in the stromal fraction but were also detectable in the thylakoid fraction. It has previously been reported that in diurnally growing C. reinhardtii cells, 20–30% of the chloroplast ribosome population is associated with thylakoids29. Here, less than 20% of the ribosomes were found in the thylakoid fractions. However, ribosomes may have dissociated from thylakoids during the long preparation process. For an independent assay of CrTIG1 and PRPL1 distribution, C. reinhardtii cells were examined by immunofluorescence. A hallmark of C. reinhardtii cells is the single cup-shaped chloroplast, which consumes most of the volume within the cell. The chloroplast contains a globular basal region with the pyrenoid and lobes extending apically from the basal region. Chloroplast localisation of CrTIG1 was confirmed by the typical cup-shape staining (Fig. 2d). Plastidic ribosomes were detected by fluorescence in situ hybridization (FISH) against ribosomal RNA and a specific PRPL1 antibody. Comparison of the suborganellar localisations of chloroplast ribosomes and CrTIG1 showed surprisingly different patterns. Ribosomes were mainly found within the globular basal region with highest concentrations proximal to the pyrenoid (highlighted by RbcL staining, Fig. 2d). CrTIG1 staining represented a patchy pattern distributed throughout the chloroplast. A stronger signal was detected in a region which showed little intensity of chloroplast ribosomes and may be outside or at the border of the chloroplast. While it cannot be ruled out that the antibody cross-reacts with cytosolic components, an alternative explanation is that some trigger factor protein may accumulate in a region which was previously shown to contain the cytosolic protein synthesis - and chloroplast import machinery30. The enrichment of trigger factor in chloroplasts was independently confirmed in A. thaliana lysates. Here, immunoblots clearly detect AtTIG1 in plastid fractions (Fig. 2e).
Chloroplast TIG proteins are unusually temperature-sensitive
The secondary structure of EcTF is predominantly α-helical for the N- and C-terminal domains, whereas the PPIase mainly contains β-sheets11, 31. To gain insight into the secondary structures of the chloroplast TIG1 isoforms, both mature proteins were analysed by far-UV circular dichroism (CD) spectroscopy and compared with EcTF. Consistent with previous reports31, 32, the far-UV CD spectrum of EcTF contained two pronounced minima at 208 nm and 222 nm, both typical for α-helical secondary structure. The spectra of both plastidic TIG1 proteins were comparable to that of EcTF, indicating that their overall secondary structures are similar (Fig. 3a). Secondary-structure estimation by the K2D2 algorithm33 indicates ~40% α-helix and ~13% β-sheet content for EcTF, close to the 43% α-helical and 16% β-sheet content determined from the respective crystal structure11. Both plastidic TIG1 proteins seem to contain a slightly higher proportion of α-helices (~44%), as indicated by a more intense negative ellipticity at 208 nm as compared with EcTF, and a similar content of β-sheets (12% and 13%, respectively). The data also confirm that all heterologously produced and purified proteins were folded and thus suitable for subsequent in vitro assays.
Thermal unfolding was studied by gradual heating of the proteins (Fig. 3a, right panels). The transition curves at 208 nm and 222 nm revealed qualitative differences between the bacterial and the plant proteins. For EcTF, a major unfolding transition was only observed at 222 nm, which started at > 30 °C and had a midpoint (where half of the population is folded and the other half unfolded) between 45 ° and 50 °C. This is consistent with another study34 using differential scanning calorimetry, which determined the unfolding midpoint of EcTF to be at 54 °C. This resistance against thermal unfolding was attributed to the dimeric form of EcTF34. For the chloroplast proteins, unfolding was traceable at both wavelengths, with unfolding starting just above 30 °C and featuring a local maximum in the ellipticity recorded at 222 nm at intermediate temperatures. The midpoints of the thermal unfolding of CrTIG1 and AtTIG1 were between 35 °C and 40 °C, which are far below the values for EcTF (Fig. 3a, right panels). Thus, even mild heat-stress conditions35 seem to cause partial unfolding of at least some domains. Such conformational changes may inactivate the chaperone or reprogram its function for other tasks during heat stress. For a more precise determination of the unfolding midpoint of CrTIG1, shifts of intrinsic tryptophan fluorescence upon thermal unfolding were recorded at wavelengths of 330 nm and 350 nm. We determined the unfolding midpoints Tm in buffers having various ionic strengths of 0–300 mM KCl. With no additional salt present, CrTIG1 showed a Tm of 35.6 °C, whereas Tm was shifted up to 41.6 °C at 300 mM KCl (Fig. 3b). Thus, more physiological salt concentrations render the protein more robust against thermal unfolding.
We next tested if thermal unfolding could also be observed in living cells, which might lead to the accumulation of CrTIG1 in protein aggregates. For this purpose, C. reinhardtii cells were exposed to various temperatures of mild to severe heat stress (i.e., 35–45 °C), and insoluble aggregates were isolated (see Methods). Overall, little aggregation was observed in cells exposed to temperatures between room temperature and 37 °C. At non-lethal heat stress between 39 °C and 42 °C35, increasing protein aggregation was observed with rising temperatures (Fig. 3c). The onset of protein aggregation at 39 °C was confirmed by examining the known heat-labile chloroplast protein rubisco activase (RCA1)36, which started to accumulate in aggregates at temperatures ≥39 °C. Interestingly, CrTIG1 was also detectable in the same fractions as RCA1 (Fig. 3d), while other chloroplast chaperones such as HSP90C or the co-chaperonin CPN20 predominantly accumulated in aggregates at higher temperatures. Thus, in contrast to bacterial TF and other molecular chaperones, chloroplast TIG1 is a remarkably heat-sensitive chaperone, which accumulates in aggregates even under relatively mild heat-stress conditions. Unlike many other chaperones, trigger factor is an ATP-independent chaperone. Thus, the observed heat sensitivity may serve as passive regulator to target this chaperone to protein aggregates which may serve as protective mechanism to rescue unfolded proteins from aggregates upon return to physiological growth conditions.
Chloroplast TIG1 is mainly monomeric
Several structural studies reported the occurrence of dimeric EcTF both in vitro and in vivo14, 32, 37. To determine if chloroplast TIG1s show similar dimerization behaviours, purified TIG1 protein was separated by SEC. A prominent peak of EcTF protein eluted at a volume of 13.6 mL (Fig. 4, top panel), while CrTIG1 eluted in a minor peak at high molecular weight (12.1 mL) and a major peak at 14.5 mL (Fig. 4, middle panel), and AtTIG1 eluted at 14.1 mL with a small shoulder preceding the actual peak (Fig. 4, bottom panel). Since SEC elution profiles are not precise enough to determine the molecular weights of particles that are clearly nonspherical, as expected at least for EcTF, each fraction of the elution peak was examined online by right-angle static light scattering (RALS). The sloping curve of average molecular weight for EcTF resembles the molecular weight distribution of an earlier study14 with lower apparent masses of the protein at the peak borders and the highest value of 79 kDa in the centre of the peak (Fig. 4, top panel, Table S2). As stated in earlier studies, a heterogeneous population of monomeric and oligomeric EcTF seems to co-elute within this peak, which might represent a fast equilibrium of monomeric and oligomeric states14. By contrast, both CrTIG1 and AtTIG1 were monodisperse, as indicated by the consistent molecular weight values within the major peak area (Fig. 4, centre and bottom panel) with polydispersity values of 1.001 and 1.002 (M w /M n ), respectively. Further, elution profiles resulted in apparent molecular weight values close to their theoretical monomeric masses (Supplementary Table S2). Hence, at the physiological salt conditions used here, chloroplast TIG1s appeared to be present mainly in a monomeric form. In earlier proteomic studies, AtTIG1 migrated in native PAGE as expected for a molecular weight of the dimeric state38. Dimeric species of TIG1 proteins cannot be excluded under certain conditions and in a native context; however, asymmetric and elongated proteins are known to migrate slower than globular proteins in native gels39, which might explain the higher apparent molecular weight of AtTIG1 in the earlier studies. For our subsequent assays, it was essential that SEC fractions of CrTIG1 and AtTIG1 be highly monodisperse, making them ideally suited for three-dimensional bead modelling by SAXS.
SAXS reveals a typical dragon-shape conformation of TIG1
SAXS was used to examine if chloroplast TIG1s possess a similar overall shape as the bacterial isoform or if the eukaryotic chaperones evolved other structural features. Initial static measurements were performed at different protein concentrations in three replicates to examine if the TIG1 proteins remain monodisperse also at higher protein concentrations. Importantly, SAXS parameters of the bacterial EcTF were very comparable to previously published datasets (Supplementary Figure S4)32. At the concentrations used here, the monomer–dimer equilibrium of EcTF was strongly shifted towards the dimeric state, although proteins are known to quickly fluctuate between monomeric and dimeric states even at high concentrations14. Indeed, the values of the Porod volume indicate mainly dimeric proteins in the samples, but the molecular weight values derived from I(0) (i.e., the intensity at zero angle) point to a fast fluctuating population (Supplementary Table S3). Further, it has been reported that the radius of gyration (Rg) and the maximal particle size (Dmax) of EcTF decrease with increasing protein concentration, possibly because of a more densely packed dimer at higher concentrations compared with the monomer at lower concentrations32. Consistently, the Rg and Dmax values determined here also decreased with increasing protein concentration, albeit to a lesser extent (Supplementary Table S3). Chloroplast CrTIG1 and AtTIG1 appeared predominantly as monomers assuming a predicted molecular weight of 53.7 kDa and 53.2 kDa, respectively. In contrast to EcTF, molar masses calculated from the I(0) values slightly increased with rising protein concentrations, most likely because of weak interparticle interference (Supplementary Tables S4 and S5). However, the high linearity of the Guinier plots speaks against aggregation of the samples (Fig. 5a and d, inset)40. To overcome this interference, low-range values at low concentrations and high-range values at high concentrations were merged for further processing. Both plastidic proteins were found to have an Rg value of ~38 Å, as determined by the Guinier plot and p(r) function. This very large Rg for a 53-kDa protein—as compared to an Rg value of 29.9 Å of globular BSA41—indicates an elongated and non-globular shape of both proteins. This notion is supported by the asymmetric peak of the pair distance distribution functions of both TIG1s with a shoulder extending to a maximum particle size of 125 Å for CrTIG1 and 127 Å for AtTIG1, respectively (Fig. 5c and f).
All analysed trigger factor proteins showed an overall similar bimodal pattern in Kratky plots with a dominant first peak followed by a distinct small peak indicating well-folded and multi-domain proteins. In addition, pronounced intrinsic flexibilities are indicated by the behaviour of the plots at higher s-range, which do not converge to the abscissa. The Kratky plot of EcTF displays a slight shift compared with both plastidic TIG1 proteins, indicating a more rigid and compact conformation due to the dimeric state32 (Fig. 5b,e and Supplementary Figure S4).
To verify our results regarding the monomeric state obtained from static SAXS measurements, we further performed online SEC coupled to SAXS detection (HPLC-SAXS). Consistent with the static assays, only minor amounts of putative dimer populations were detectable in the CrTIG1 and AtTIG1 samples, as indicated by the slight tailing of the monomeric peak fraction (Fig. 6a and d). To simplify our analysis of the chloroplast proteins, these higher molecular weight fractions were neglected in all subsequent steps. Thus, only frames within the peak section of high quality and constant Rg were averaged for further analysis (Fig. 6a,d and Supplementary Figure S5, grey shaded area). The molecular weight was determined using multiple, concentration-independent, methods. These seem to overestimate the mass of the chloroplast TIG1s by up to 17% (Table 1), which might be attributed to traces of dimers or to the influence of capillary fouling on scattering42. However, the masses determined by RALS strongly supported predominantly monomeric states. Importantly, the calculated Rg (34.4 Å for CrTIG1, 35.5 Å for AtTIG1) and Dmax (122 Å for CrTIG1, 124 Å for AtTIG1) values were comparable to the results from static measurement, which allowed us to complementarily process data from both approaches for further modelling.
All plastidic TIG1 SAXS datasets were applied for ab initio modelling of low-resolution bead envelopes. Modelling of EcTF was not pursued with our dataset since the heterogeneous population of dimeric and monomeric species complicates modelling and different conformations of purified EcTF proteins were comprehensively studied before32. With the static SAXS measurements, more defined scattering at a higher s-range was obtained because of a higher protein concentration in the sample. Hence, ab initio modelling was pursued with the GASBOR algorithm, which allows a chained assembly of dummy residues corresponding to the number of amino acids. The models obtained fitted the experimental data with χ2 values of 0.81 for CrTIG1 and 0.69 for AtTIG1 (Supplementary Table S6). To confirm that the minor traces of putative dimeric species did not significantly influence the models, data were processed in symmetry P1 (no symmetry) and P2 (dimer). The P2 symmetry could be excluded because of the resulting high χ2 values of these models (data not shown) and hence supported the fact that our models were truly based on the monomeric molecules. For the HPLC-SAXS dataset, ab initio modelling was performed with DAMMIF. Consistent with the modelling of the static SAXS data, χ2 values of 0.72 for CrTIG1 and 0.79 for AtTIG1 (Supplementary Table S6) were gained for these low-resolution structures.
The low-resolution bead models of CrTIG1 and AtTIG1 proteins resulting from both datasets clearly resemble the conformation of the bacterial TF with a dragon-like structure containing head, tail and arms (Fig. 7). Interestingly, groove-like structures are visible along the middle domain (Supplementary Figure S6), which could constitute putative binding sites for peptide stretches of chloroplast TIG1 substrates.
Next, we attempted to fit high-resolution models into the SAXS-based ab initio shapes. Since, to our knowledge, no structural data exist for any chloroplast trigger factor to date, predicted models were calculated with the RaptorX43 and SAXSTER44 algorithms on the basis of various structural data of exclusively full-length bacterial isoforms. Different high-resolution structures of TF exist for dimeric apo E. coli TF complexes (X-ray structure, PDB entry 1w2611) and monomeric TF associated with different fragments of the PhoA (NMR structures, PDB entries 2mlx/2mly/2mlz37) or the ribosome (PDB entry 2vrh12). Further, crystal structures of dimeric TF from V. cholerae (PDB entry 1t1145) and T. maritima are available. For the latter, both full-length structures with and without a substrate are monomeric (X-ray structures, PDB entries 3gty/gt046). Different bacterial TF species show various domain orientations47. For example, both the crystal structure and NMR structural analyses reveal different orientations of the head domain among EcTF47, VcTF44, and TmTF46. For VcTF, both domains constituting the arms and the tail show a twist, which is not seen for the other isoforms45. Psi-Blast searches with sequences of CrTIG1 and AtTIG1 resulted in similar matches between the plastidic TIG1 proteins and the bacterial TFs (Supplementary Table S7). The best coverage for CrTIG1 and AtTIG1 was reached with the full-length NMR and cryoEM structures of EcTF (PDB entry 2mlx and 2vrh) (Supplementary Table S7). Our predicted models were validated with CRYSOL and superimposed with the bead models. Again, the models that gave the best χ2 values in CRYSOL were the predicted models from RaptorX based on 2mlx. Importantly, not all high-resolution models fitted with same quality. Superimposing the models based on VcTF and TmTF to the SAXS data was not successful as judged by their high χ2 scores (>25–55, data not shown). To test if we could further improve the domain agreement of our positive models within the SAXS-based bead models, SREFLEX was applied, which examines the flexibility of models. Generally, this refinement improved the χ2 values, albeit with a different outcome. For CrTIG1, χ2 values were slightly improved from 10.4 to 6.2. SREFLEX Refinement of CrTIG1 might have been less than optimal since the orientations of some α-helices within the central body domain were severely altered (Fig. 7a). In contrast, the refinement of AtTIG1 high-resolution models improved χ2 values significantly from 57.2 to 3.3 (Supplementary Table S6) with only mild rearrangements within the domains (Fig. 7c). As shown in Figs 5 and 6, two independent evaluations of our high-resolution models by CRYSOL and a simulation of theoretical scattering and fitting to our experimental data by FoXS resulted in close fits of the models to the SAXS data. Thus, it can be assumed that the E. coli-based models closely describe the overall shape and domain position of the plastidic TIG1 proteins. However, none of the bacteria-derived models tested resulted in a complete match to the SAXS shapes obtained from the static and HPLC- SAXS measurements. This suggests that the intrinsic fold of the chloroplast TIG1 proteins, especially the relative arrangement of the three domains to each other, may be unique for TIG1s (Fig. 7). This is underscored by the relatively high normalized spatial discrepancy values (NSD, a measure of quantitative similarity between sets of three-dimensional points), which are larger than 2.5 for all SREFLEX-refined models of plastidic TIG1s (Supplementary Table S6). These differences seem most pronounced for the arms, which are further away in both chloroplast TIG1 conformations compared with EcTF11, and the head and tail domains, which cannot be described perfectly by our models (Fig. 7 and Supplementary Figure S6). To fully resolve these altered conformations of chloroplast trigger factor, atomic structures are required to determine how chloroplast TIG1 is tailored to perform its function within the chloroplast.
In conclusion, we present here the first description of two eukaryotic chloroplast-localised molecular chaperones of the trigger factor family. Both plastidic TIG1 orthologues are mainly monomeric, as shown independently by RALS and SAXS for the purified proteins. The most surprising finding was the high propensity of plastidic TIG1 for thermal unfolding, which might perform a specific task during heat exposure. Independent static and HPLC SAXS measurements and subsequent ab initio modelling revealed the typical dragon-shape of the molecule as known from bacterial TF containing a head, a tail, and two arms. This trigger-factor-like shape was confirmed by independent high-resolution models, which fitted well to the SAXS data. However, the chloroplast TIG1 models indicate unique domain arrangements and intrinsic conformations, thus suggesting that plastidic TIG1s have structurally diverged from their bacterial orthologues. Given the ubiquitous action of bacterial TF on most newly-synthesized proteins, plastidic TIG1 – and maybe even the truncated version TIG2 – may have specifically adapted to serve the maintenance of protein homeostasis in chloroplasts. It will be interesting to see why chloroplasts are the only compartment of eukaryotic cells that conserved these trigger factor chaperones. Future studies are also required to determine the detailed function and substrate specificity of these chaperones in chloroplasts.
Cells and Culture Conditions
Most experiments were conducted with the C. reinhardtii strain cw15 CF18548. Microscopy was done with strain cw15–325 (cwd, mt+, arg7−). All cultures were grown photomixotrophically in TAP medium49 on a rotary shaker at 25 °C and an illumination of 70 E m−2 s−1. For chloroplast isolation, cells were grown in TAP medium supplemented with 0.5% (w/v) peptone. For A. thaliana cell extracts, plants were grown under standard conditions.
Cloning, production and purification of the trigger factor species
For CrTIG1 both TargetP and ChloroP50, 51 predicted the transit peptide cleavage site QVC/A. Mature C. reinhardtii TIG1 protein (lacking the putative N-terminal 67 amino-acid transit peptide) was created by site directed mutagenesis of pFW13 resulting in pFW115. For AtTIG1, the predicted cleavage site was RVS/S. Mature A. thaliana TIG1 (lacking the putative N-terminal 27 amino-acid transit peptide), was amplified by PCR from cDNA with the primers (5′-GGGGCATATGTCCCGTCTCTTCCAATCAG-3′) and (5′-CCCCGGATCCTCAACGAGTGATGTATTGAATC-3′) and cloned with NdeI and BamHI into pTyb21 (NEB) resulting pFW141. Since the cleavage site was predicted incorrectly, the cleavage site RLF/A was reassigned based on the alignment of AtTIG1 with CrTIG1. For correction of the mature protein, 49 amino acids were removed from the N-terminal sequence with oligos 5′-GGAAGAGCTCATATGTCCCGTCTCTTCCAATCAGATAGTGT GCTACAGTTTGGTGGGAGGTTGAAGAAACCAATTAGCAGGCCTTTGGACATGTCTTGTGTCTCTAGAAAAATTGGATTTTTCGGA GATTTTATGTCACATGGTGGTAATTTTAGGCTATTC-3′ by site directed mutagenesis resulting in pFW136. The TF sequence from E. coli was amplified by PCR from DH5alpha genomic DNA with primers (5′-GGGGCATATGCAAGTTTCAGTTGAAACCAC-3′) and (5′-CCCCGGATCCTTACGCCTGCTGGTTCATC-3′) and cloned with NdeI and BamHI into pTyb21 (NEB) resulting pFW142. For heterologous protein production pFW115, pFW136 and pFW142 were synthesized in E. coli ER2566 and purified via chitin affinity resins according to the manufacturer’s instructions (NEB). All purified proteins were concentrated with Amicon Ultra-15 concentrator (Merck Millipore, Darmstadt) and purified over a Superdex 200 SEC column (GE healthcare) in 10 mM Tris pH 7.5 and 10 mM KCl buffer. For antisera production, rabbits were immunized with CrTIG1 or AtTIG1.
Phylogenetic analyses and comparison of sequence similarity and identity
Sequences were derived from http://phytozome.jgi.doe.gov, NCBI and http://www.uniprot.org. Phylogenetic analyses were performed with sequences comprising the mature sequences lacking predicted transit peptides using the Phylogeny.fr pipeline52 implementing algorithms T-Coffee53, BioNJ54, and TreeDyn55 setting bootstraps values to 1000. Sequence similarity and identity was determined by http://imed.med.ucm.es/Tools/sias.html.
Cell fixation and staining was done as published before56. Primary antibodies were against CrTig1, RbcL, and PRPL1 in dilutions of 1:500, 1:2,000, and 1:1,000, respectively. The secondary fluorescein isothiocyanate-labeled antibody (Sigma-Aldrich) was applied in a 1:200 dilution. FISH probes were prepared according to57. After incubation with the secondary antibody, slides were washed in phosphate-buffered saline, and a drop of mounting solution containing DAPI (Vectashield; Vector Laboratories) was applied at the centre of each slide. Samples were analysed with a Leica TCS SP5 II confocal laser-scanning microscope (514-nm excitation and 500-, 592-, or 598–657 nm detection).
Circular dichroism spectroscopy
CD spectra were recorded on a Chirascan-plus (Applied Photophysics) spectropolarimeter. All proteins were measured at a concentration of 0.1 mg/mL in 10 mM KCl, 10 mM Tris, pH 7.5 buffer. At fixed temperatures (20 °C), five scans between 190 nm and 280 nm were recorded with an optical pathlength of 0.1 cm, a step size of 1 nm, and a digital integration time of 1 s. All spectra were baseline-corrected. At the two minima at 222 nm and 208 nm, temperature scans were recorded from 20 °C to 94 °C at a heating rate of 1 °C/min and a digital integration time of 4 s.
Thermal stability/melting point determination using Differential Scanning Fluorimetry
Protein thermal stability was measured at 5 mg/mL protein concentration in different buffer compositions using the Prometheus NT.48 (NanoTemper Technologies). Thermal unfolding was performed in nanoDSF grade high-sensitivity glass capillaries (NanoTemper Technologies) with a heating rate of 1 °C/min over a temperature range of 20–95 °C. Protein-unfolding midpoints (Tm) were calculated from the first derivative of the ratio of intrinsic protein fluorescence emission intensities at 330 nm and 350 nm58, 59.
Analysis of protein aggregates
C. reinhardtii cells were grown to logarithmic phase. For each sample, 3 × 108 cells were harvested and resuspended in 50 mL fresh medium at the respective temperatures. After 45 min cells were harvested quickly and chilled on ice. Aggregate preparations were done as published previously60. In brief, cell pellets were resuspended in lysis buffer (20 mM NaPi pH 6.8, 10 mM DTT, 1 mM EDTA, 0.25x proteinase inhibitor (Roche, cOmplete-EDTA-free)) and lysed by sonication (Bandelin Sonopuls UW 2200, Berlin). Cell debris was removed by centrifugation at 500 g, and supernatants were adjusted to same protein concentrations. As input control, “Total lysate” aliquots were removed and supplemented with 1 volume of sample buffer (125 mM Tris-HCl, pH 6.8, 20% glycerol, 4% SDS, 100 mM DTT, and 0.005% bromophenol blue). From remaining lysates, protein aggregates were isolated by repetitive centrifugation at 19,000 g and washes with 20 mM sodium phosphate pH 6.8 and 2% NP-40. The final pellet was dissolved in 6 M urea and supplemented with 1 volume of sample buffer before separation on SDS-PAGE, transfer to nitrocellulose membrane, and immunoblotting.
SEC coupled to RALS was performed on an OMNISEC system (Malvern Instruments, Worcestershire, UK) using a Superdex 200 Increase 10/300 SEC column (GE Healthcare). Prior to each run, the system was extensively equilibrated in running buffer (20 mM Tris, pH 7.5, 150 mM KCl). Protein concentrations were determined from online refractive index (RI) measurements assuming a dn/dc of 0.185 mL/mg. 50 µL of a calibration standard (BSA, Sigma, at 3 mg/mL) and samples (at 4 mg/mL) were injected twice. All experiments were conducted at 20 °C with a flow rate of 0.5 mL/min for 70 min. Molar masses were calculated as described by the manufacturer using OMNISEC v10 software.
X-ray scattering experiments and data analysis
Small-angle X-ray scattering data were collected on the BM29 beamline61 at the European Synchrotron Radiation Facility (ESRF, Grenoble) with a Pilatus 1 M detector (16.9 cm × 17.9 cm) at a wavelength of 0.9919 Å (12.5 keV) and a sample-detector distance of 2.867 m corresponding to a q-range of 0.025–5 nm−1. For static measurements, five to eight different protein concentrations were measured with 1 s exposure times per frame and 10 frames per concentration (n = 3) at 20 °C. Scattering by proteins samples were measured in 20 mM Tris buffer, pH 7.5 supplemented with 150 mM KCl. Scattering by the corresponding buffers was measured before and after one run, averaged and subtracted from the protein scattering. BSA standards were used to calibrate the I(0) values and the scattering of pure water was used to calibrate the intensity to absolute units62. Prior to measurements, protein concentrations were determined from absorption at 280 nm (A280) using a NanoDrop One photometer (Thermo Scientific) and the corresponding molar coefficient calculated with ProtParam (www. expasy.ch).
For SEC high-performance liquid chromatography/small-angle X-ray scattering (HPLC-SAXS), an online HPLC system (Shimadzu, Japan) connected to the sample changer of the BM29 was used63. Per run, 400 µg protein (50 µL with 8 mg/mL protein concentration) was injected onto an ENrich SEC 650 10 mm × 300 mm column (BioRad) and separated at a flow rate of 0.75 mL/min at room temperature. 1500 frames with an exposure time of 1.5 s per frame were collected per run.
The data processing was done with the ATSAS 2.7.2 program package64, 65. The forward scattering I(0) and the radius of gyration Rg were evaluated with PRIMUS66 using the Guinier approximation assuming that for a spherical particles at very small angles (s < 1.3/Rg) the intensity is represented by I(s) = I(0) exp[−(sRg)2/3]). The distance distribution function p(r) and the maximum particle dimension (Dmax) were obtained using GNOM67.
Frames collected from static measurements were checked for radiation damage before averaging and buffer subtraction. Scattering curves from the concentration series were investigated individually for indications of aggregation and particle attraction or repulsion. Curves affected were excluded from further analysis. For the characterization of the oligomerization state, scattering curves (from n = 3) with same protein concentration were scaled and merged. For ab initio modelling, frames from different concentrations were merged. Frames of the HPLC-SAXS, which were automatically processed by EDNA, were checked and inspected with HDFview. Frames with a consistent Rg from the peak scattering intensity and good quality were scaled manually and averaged to yield a single frame. Buffer subtraction was applied using buffer frames before or after the protein peak avoiding over-subtraction with frames from the aggregate peak.
A first insight into the overall shape of the TIG1 proteins was given by the AMBIMETER tool. These models yielded a crude shape topology, which was further refined and supported by ab initio modelling. For the latter, 10–20 models were generated with GASBOR68 or DAMMIF69 and then averaged with DAMAVER70. As a last refinement step, the damstart model generated with DAMAVER was refined with one cycle in DAMMIN. Protein structure modelling was performed with the SAXSTER server71 on the basis of all available full-length TF structures (i.e. from E. coli, T. maritima and V. cholerae) as templates or RaptorX43 algorithm based on the EcTF structure. Superposition of ab initio models derived from SAXS data and 3D models were calculated with SUPCOMB72 or SUPALM73. Fits between the SAXS data and the structures were evaluated with CRYSOL74 and FoXS75 and superposed with the bead models using SUPALM73. The models were improved using SREFLEX in rigid or flexible mode with domain partition76. To this end, sequences regions of the domains were determined from the RaptorX model in accordance with the domain annotation of the available TF structures (Supplementary Table S8). Additionally, theoretical scattering profiles from the models were generated and fitted against the experimental data with the FoXS Server75.
Chloroplast and mitochondria were isolated from C. reinhardtii cells as described earlier26. SDS-PAGE was performed as published77. Antibodies described earlier were against HSP70B48, CGE178, HSP90C26, mitochondrial carbonic anhydrase79, CytF80 and CF1β81. Antibody purification was described earlier26.
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
We thank Francis-André Wollman for the antibodies against Cytf and CF1β, Michael Schroda for the antibodies against HSP70B, HSP90C and CGE1 and help with phylogenetic analyses, and Mats Eriksson for the antibody against mitochondrial carbonic anhydrase. For cloning of CrTIG1, we thank the Kazuza DNA Research Institute for providing cDNA clone AV639812. We thank Catherine Birck from the IGBMC Strasbourg for access to the Prometheus NT.48 and Sabine Heit for help in performing measurements. We thank the BM29 staff at the ESRF Grenoble for support with SAXS experiments, which were performed within the framework of the Frankfurt–Homburg Block Allocation Group (BAG, MX-1745 and MX-1836). We thank Erik Frotscher and Anne Grethen for help with CD and SEC-RALS, respectively. For critical reading of this manuscript, we thank Michael Schroda and Karolin Willmund. This work was supported by the Deutsche Forschungsgemeinschaft (TRR175-A05) and the Marie-Curie Career Integration Grant to FW and the Landesforschungsförderungsprogramm des Saarlandes (LFFP 11/02 and 15/04) to CRDL.
Electronic supplementary material
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.