Abstract
Proposals for systems embodying condensed matter spin qubits cover a very wide range of length scales, from atomic defects in semiconductors all the way to micron-sized lithographically defined structures. Intermediate scale molecular components exhibit advantages of both limits: like atomic defects, large numbers of identical components can be fabricated; as for lithographically defined structures, each component can be tailored to optimise properties such as quantum coherence. Here we demonstrate what is perhaps the most potent advantage of molecular spin qubits, the scalability of quantum information processing structures using bottom-up chemical self-assembly. Using Cr7Ni spin qubit building blocks, we have constructed several families of two-qubit molecular structures with a range of linking strategies. For each family, long coherence times are preserved, and we demonstrate control over the inter-qubit quantum interactions that can be used to mediate two-qubit quantum gates.
Similar content being viewed by others
Introduction
An information processing device whose elements are capable of storing and processing quantum superposition states (a quantum computer) would support algorithms for useful tasks such as searching1 and factoring2 that are much more efficient than the corresponding classical algorithms,3 and would allow efficient simulation of other quantum systems.4 One of the key challenges in realizing a quantum computer lies in identifying a physical system that hosts quantum states sufficiently coherently, and provides appropriate interactions for implementing logic operations.5 Among the molecular spin systems that have been proposed as qubit candidates are N@C60,6–9 organic radicals10,11 and molecular magnets.12–14 We proposed exploiting molecular magnets based on heterometallic antiferromagnetic rings.15,16 These systems exhibit a number of favourable features supporting their application as components of a quantum computer: flexibility in their chemical composition allows control over both the total ground-state spin (by modifying the heteroatom) and the carboxylate ligands;17 their well-defined internal magnetic excitations may offer mechanisms for efficient single-qubit manipulations;15 and the ground-state spin is highly coherent,18 particularly when the chemical structure is optimised.19
In the context of molecular spin qubits, the simplest conceivable multi-qubit structure is a molecular dimer. This observation has motivated various efforts to synthesise dimers including, for example, N@C60–N@C60,20,21 radical–radical,10,11 N@C60–molecular magnet (Kaminski D. et al. in preparation) and molecular magnet–molecular magnet.22–25 However, the design of a dimer specifically to host two-qubit experiments should take account of the importance of three key time scales relative to one another: T2, the individual qubit phase relaxation time, must be longest; h/J, which is characteristic of the duration of two-qubit gates (where J is the inter-qubit interaction energy and h is Planck’s constant) should be intermediate; and the single-qubit manipulation time should be the shortest. In practice, phase relaxation times in heterometallic antiferromagnetic rings are in the 1–10 μs range at low temperatures,18,19 and they can be manipulated in a typical pulsed electron spin resonance (ESR) apparatus on the 10-ns timescale; thus an interaction offering h/J in the 100-ns range could be exploited, for example, in a multi-qubit experiment to generate controlled entanglement. In this Article we report the synthesis of two families of dimers of the antiferromagnetic ring Cr7Ni and pulsed electron spin resonance (ESR) experiments probing the spin coherence times and the intra-dimer magnetic interactions. We demonstrate that the modular nature of our synthetic approach provides independent control of the molecular nanomagnet components and of the chemical coupling between them. This allows us the flexibility to optimise the physical properties of the dimers with respect to the three key time scales.
Methods
Synthesis of multi-qubit molecular structures
The molecular structures of the dimers that we studied are shown in Figure 1. The monomer components are based on Cr7Ni rings in which intra-ring nearest-neighbour antiferromagnetic coupling gives rise to a well-defined S=1/2 ground state. Each dimer family employs a different variety of Cr7Ni ring, allowing very different approaches to chemical dimerisation.
The first family (1A, 1C and 1D in Figure 1) is a collection of hybrid [3]rotaxanes.26 In each of these compounds two Cr7Ni rings are threaded by a rigid organic molecule. There is no covalent bonding between the two rings and the magnetic interaction is expected to be purely dipolar (through space), and modulated by both the length of the threading molecule and the orientation of the dimer with respect to an external magnetic field.
The [3]rotaxane structures, are synthesised by growing the heterometallic rings around rigid thread molecules that contain amine-binding sites. Initially we studied two closely related threads: [R–CH2CH2–NH–CH2–(C6H4)3–CH2–NH–CH2CH2–R] (R=Ph, Th1; R=CH2CHMe2, Th2). For both threads there are three aromatic rings between the two amines, and they differ only in the stopper on the thread. The reaction to make the [3]rotaxanes involves adding the organic thread to a solution of hydrated chromium trifluoride dissolved in pivalic acid (HO2CtBu); the heterometallic rings then grow around each ammonium cation and the ring is completed by addition of a nickel precursor. We made four related [3]rotaxanes (see Figure 1 and Supplementary Information): {[H2Th1][Cr7NiF8(O2CtBu)16]2} 1A; {[H2Th2][Cr7NiF8(O2CtBu)16]2} 1B; {[H2Th2][Cr7NiF8(O2Cd-tBu)16]2} 1Bd (with the pivalic acid perdeuterated); {[H2Th1][Cr7NiF8(O2CAd)16]2} 1C (HO2Cad=1-adamantanecarboxylic acid) in yields between 17 and 35%.
In the [3]rotaxanes the two Cr7Ni rings each contain an octagonal array of seven chromium(III) sites and one nickel(II) site, with each edge of the octagon bridged by a single fluoride and two carboxylates; these molecules are green in colour. The dimer structures can essentially be regarded as an octagonal prism of metal sites. The fluorides lie inside the octagon and form H-bonds to the ammonium of the thread. The distance between the Cr7Ni ring centroids is 1.64 nm, whereas the longest metal–metal distance between rings is 1.94 nm. The ring cavity is sufficiently small that a phenyl- or iso-propyl group can act as a stopper for the rotaxane. In the crystal structure the nickel site is disordered about the eight metal sites of the octagon. We made compound 1Bd because we have found that deuterating ligands in Cr7Ni monomers can significantly prolong the spin coherence times.18 Similarly spin coherence times in isolated rings can be improved by reducing the mobility of nuclear spins in the ligands,19 leading us to prepare 1C, which contains carboxylate ligands with rigid adamantyl groups.
Attempts to increase the inter-ring separation by adding aromatic rings to the linker were limited by the low solubility of longer organic chains containing rigid aromatic groups. Instead, we made a new [2]rotaxane by growing the ring around Ph–CH2NH2–CH2–C6H4–Py Th3 (Py=pyridyl), giving {[HTh3][Cr7NiF8(O2CtBu)16]} (Supplementary Figure S2); this [2]rotaxane contains a pyridyl group at the end of the thread and two of these are then coordinated to the axial position of a dimetal tetracarboxylate compound, in this case [Rh2(O2CMe)4]. This gives a new route to [3]rotaxanes, and results in {[HTh3][Cr7NiF8(O2CtBu)16]}2[Rh2(O2CMe)4] 1D (Figure 1c), where there is a distance of 2.5 nm between the Cr7Ni ring centroids of the [3]rotaxane.
The second family of dimers (2A, 2B and 2C in Figure 1) involves a chiral Cr7Ni ring, [Cr7NiF3(Etglu)(O2CtBu)15(H2O)] (where H5Etglu=N-ethyl-D-glucamine).27 This structure again contains an octagon of metal sites, but at the centre is a penta-deprotonated N-ethyl-D-glucamine, which bridges between Cr sites using the deprotonated alkoxide side-arms. Fluorides bridge three edges of the octagon, and there are again pivalate groups outside the ring. These molecules are purple in colour. The key difference from the rings in the first family is that there is a substitutionally labile water molecule on the nickel(II) site, which is unique and defined crystallographically. Reacting two such rings with, for example, a linear di-imine gives dimers linked via the Ni–Ni axis.
Previously we have used simple di-imines,23 producing dimers in which we can vary the inter-ring interaction through distance and through the torsion angle within the bridging group. The short di-imine linker leads to inter-ring interaction energies of the order of h×0.3 GHz to h×10 GHz, giving rise to large splittings in the continuous wave (CW) ESR spectrum compared with the monomer.23 Interactions on this scale would give rise to inter-qubit gate times that are shorter than the duration of single-qubit gates, precluding the possibility of multi-qubit pulsed ESR experiments.
In order to extend the separation of the covalently bound ring dimers, we have employed boronic acid-capped clathrochelate complexes,28 which have previously been used as scaffolds to create bipyridyl linkers varying in length from 1.5 to 5.4 nm. The three dimers in this family all contain Fe(II) (low-spin and diamagnetic in this trigonal prismatic coordination environment) as the divalent metal within a capped tris(dioxime) macrobicycle. We synthesised the clathrochelates as described elsewhere28 and mixed them with [Cr7NiF3(Etglu)(O2CtBu)15(H2O)], leading to compounds {[Cr7NiF3(Etglu)(O2CtBu)15]2L1} 2A, {[Cr7NiF3(Etglu)(O2CtBu)15]2L2} 2B and {[Cr7NiF3(Etglu)(O2CtBu)15]2L3} 2C, shown in Figure 1. Compounds 2A and 2C crystallised well, allowing a full-structure determination. Crystals of 2B were weakly diffracting and only the metal sites could be determined, nevertheless allowing us to estimate the distance between the Ni sites on the heterometallic rings. The shortest metal–metal contacts in this family are the Ni–Ni distances at 1.89, 2.71 and 3.07 nm for compounds 2A, 2B and 2C respectively. The longest Cr–Cr distances between rings are far greater at 2.24, 3.24 and 3.55 nm respectively.
Electron spin resonance experiments
Figure 2 shows X-band (~9.5 GHz) CW ESR spectra of compounds 1A and 2A and EasySpin29 simulations, from which the spin Hamiltonian parameters may be extracted (see the legend of Figure 2). Within each dimer family, the spectra are very similar; spectra for 1B, 1C, 1D, 2B, and 2C are shown in Supplementary Figure S1. For both 1A and 2A, the spectra are characteristic of a spin-1/2 exhibiting an approximately axially anisotropic g-factor. The X-band spectrum of 2A shows more structure on the low-field edge; we believe that this due to partial resolution of hyperfine structure. In both, there is a broadening arising from unresolved hyperfine interactions.
In both compounds the CW spectra are similar to the spectra of the corresponding monomers,18,30 indicating that in these compounds the inter-ring magnetic interaction is small compared with the ESR linewidth in energy. This is consistent with the requirement that two-qubit gates should take longer than single-qubit manipulations, a first indication that these dimers are more suitable for quantum information processing experiments than earlier heterometallic ring dimers.23 X-band pulsed ESR experiments yield spin coherence times, Tm (given in Table 1) that are broadly consistent with the times measured for monomers,19 offering reassurance that the formation of complexes and dimers is not intrinsically detrimental to the quantum phase coherence.
The form of the CW spectra imposes an upper bound on the intra-dimer magnetic interaction, but to measure this interaction precisely in this regime requires coherent methods; double electron–electron resonance (DEER, also known as pulsed electron double resonance, PELDOR)31–33 is the established method for so doing. Although originally applied to inorganic model systems,32 in recent years, DEER has been applied extensively to biological systems.34 By modifying pairs of sites in proteins with spin labels such as nitronyl nitroxides, DEER can be used to measure the dipolar interaction, and therefore the distance, between the labels.35
DEER techniques exploit the fact that, if there is a magnetic interaction between two spin centres, the coherent precession rate of one of the centres is modified by an inversion of the spin state of the other centre. In practice this is achieved through pulsed ESR sequences using two frequencies, such as the standard four-pulse DEER sequence shown in Figure 3a.33 The first two pulses, π/2—τ1—π at frequency ν1, set up a Hahn echo31 at a time 2τ1 on one of the spins. As this spin continues to precess, a ‘pump’ π pulse at a second frequency ν2 at time T (relative to the ν1 echo) inverts the second spin, thus modifying the effective magnetic field (and therefore the precession rate) experienced by the first spin. A subsequent refocusing π pulse at frequency ν1 a time τ2 after the first echo generates a second echo at a time 2τ1+2τ2, with an amplitude that depends on the time at which the ν2 inversion pulse was applied and on the strength of the interaction between the two spins. Observing this echo as a function of the time, T, of the pump pulse reveals oscillations at the frequency corresponding to the magnetic interaction energy between the two centres. A three-pulse variant, shown in Figure 3b,32 has the advantage of being shorter and having fewer pulses, thus enhancing the amplitude of the measured echo, particularly for systems in which the spin coherence times are short. The disadvantage is that for short times T, the ν2 pump pulse overlaps the coherence-generating ν1 π/2 pulse, distorting the spectra around the time T=0 [33].
This description of DEER depends on some heterogeneity between the two spin centres in the molecule under study, so that the frequencies ν1 and ν2 are resonant with different centres. We performed DEER experiments at low temperatures (2.5 K, to maximise spin coherence times) on dilute frozen solutions of dimers (0.1–0.2 mM, to minimise interdimer dipolar interactions). In this case differences between the two heterometallic rings may arise from conformational flexibility. In the first family, the [3]rotaxane dimers, there may be variation in the position of the Ni centre between the two rings, or some slight bending of the stiff threading molecule. In the second family, the covalently bound dimers, the rings could rotate about the axis defined by the linker. In either case, the distortions of individual rings (giving rise to g-strains) or variations in configurations of hyperfine-coupled nuclei (resulting in variations of the effective local magnetic field) offer asymmetry between the two rings within a dimer.
The CW spectra in Figure 1 extend over a magnetic field range of about 30 mT at X-band (about 9.5 GHz), corresponding to an absorption spectrum at a fixed magnetic field covering about 750 MHz, as plotted in Figure 3c. Intervals within this energy range can be identified with orientationally selected sub-populations of rings. Thus, microwave pulses at different frequencies within the spectrum excite orientations selectively, shown as coloured regions on spheres in Figure 3d. We anticipate that, notwithstanding a degree of flexibility, the orientations of two rings within a single dimer should be reasonably well correlated. With this in mind, we choose to separate ν1 and ν2 by a frequency that is small compared to the total width of the spectrum, so that they excite neighbouring orientational sub-populations of rings.
In practice, the response of the microwave resonator used in the experiment is not uniform over the frequency range of the absorption line. Instead we used fixed frequencies for ν1 and ν2, and we achieved orientation selection by adjusting the external magnetic field to bring the appropriate part of the absorption spectrum into resonance with the applied pulses. We used detection pulses (at frequency ν1) of 40 ns and pump pulses (ν2) of 24 ns, separated in frequency by 80 MHz.
Results
Figure 4 shows typical DEER spectra taken on compound 1A. The left panel shows the amplitude of the final echo as a function of the time, T, of the pump pulse for three different orientation selections. Open circles are raw data; the solid curves are filtered using standard tools (the Matlab package DeerAnalysis36) to smooth the data and to remove oscillations (electron spin echo envelope modulation, or ESEEM18,31) associated with couplings to proton nuclear moments. To the right of each trace, a spherical intensity map indicates the range of orientations probed at the given applied magnetic field and experimental detection frequency. The right panel shows the Fourier transforms of the time-domain data from the left panels (both raw data, open circles, and filtered data, solid lines).
The dependence of the DEER signal on magnetic field (or, equivalently, orientational sub-population) is strong, owing to several contributory factors. First, the inter-ring dipolar interaction depends on the orientation, θ, of the dimer inter-ring axis with respect to the magnetic field as (3 cos2θ−1). It therefore varies significantly as a function of the dimer orientation and passes through zero at the magic angle, θ≈54°. Second, the magnitude by which the detected echo is modulated in the DEER experiment depends on the proportion of dimers excited initially by ν1 that is also excited, at the other end, by ν2.
In a magnetic field of 377.84 mT (lowest trace, blue), dimers whose inter-spin axes are perpendicular to the field are predominantly excited. Within this sub-population the range of inter-ring magnetic dipolar interactions is strongly peaked around a single value, giving rise to clearly defined oscillations with a period of about 155 ns. The Fourier transform, which represents the distribution of coupling strengths within the selected orientational sub-population, is correspondingly sharply peaked at about 6.5 MHz. The first minimum in the time-domain data, occurring at about 77 ns, is the duration for inversion of the state of one of the qubits under the influence of the second. This evolution of the state of one qubit conditional on the state of the other is exactly the kind of physical interaction that allows for implementation of multi-qubit quantum logic; in our case, the time to the first minimum corresponds to the duration of a two-qubit conditional phase gate. We note that this time satisfies the criteria that we identified above for two-qubit devices: the two-qubit gate time (of order 100 ns) lies between the single-qubit gate time (of order 10 ns) and the phase relaxation time (in the microsecond range).
The sub-population excited at a magnetic field of 385.84 mT (middle trace, green) is comprised of dimers whose inter-ring axes lie at orientations peaked in between parallel and perpendicular to the external magnetic field. The distribution of orientations includes a significant proportion close to the magic angle at which the dipolar interaction strength goes through zero, resulting in a broad distribution of interaction strengths and an almost monotonic dependence of the time-domain DEER signal on T.
At 390.84 mT, ν1 excites principally rings whose planes are perpendicular to the magnetic field (i.e. those whose effective g-factor is close to g∥). Deviations from this orientation lead to a greater contribution to the effective g-factor from the larger g⊥, and therefore to a higher resonant frequency. Thus, in dimers that are orientationally selected by the excitation of one ring at frequency ν1, ν2 (which is lower in frequency than ν1) is comparatively unlikely to excite the other ring. This gives rise directly to the comparatively weak modulation in the time-domain trace at 390.84 mT. The inter-spin axes of this sub-population of dimers are aligned along the magnetic field direction, maximising the orientation-dependence of the dipolar interaction (i.e., θ≈0°). Correspondingly, the time-domain signal evolves comparatively rapidly at short times and the Fourier transform contains components at high frequencies.
Figure 5 shows the equivalent DEER data for a sample from the second family, 2A. As for sample 1A, the DEER signal reveals well-defined oscillations and a strongly peaked distribution of inter-ring couplings for populations of dimers whose axes are close to perpendicular to the magnetic field, and broader coupling distributions and weaker modulations for populations at other orientations. However, compared with 1A, 2A exhibits coupling strengths that are smaller by a factor of about two (the first minimum in the time-domain data at 380.84 mT occurs at about 157 ns; the peak in the Fourier transform is at 3.3 MHz). This is broadly accounted for by the larger separation of the rings in 2A (which is somewhat extended over the Ni–Ni distance of 1.89 nm by the rotational degree of freedom of the rings about the linker axis) than in 1A (the centroids of whose rings are separated by 1.6 nm), and the fact that the dipolar interaction varies with separation, r, as 1/r3.
These trends are reflected in the DEER data for all of the compounds shown in Figure 1; the time-domain data and Fourier transforms for compounds other than 1A and 2A are presented in the Supplementary Figures S2 to S6, and the two-qubit gate times are listed in Table 1. There is a direct correlation between the interaction strength and the inter-ring separation, with larger separations giving rise to weaker interactions. The two-qubit gate times reach about 550 ns for the longest dimers. The interactions are weaker in the the second family than in the first, owing to the extra degree of freedom in the structure: rings that are attached to the linker through a single point on the rim of the ring are free to rotate about the linker axis, allowing a greater inter-ring separation.
We note also that our strategy allows for enhancement of the spin coherence times independently of the inter-ring interaction strength. In earlier studies of monomers,19 we found that deuteration and immobilisation of nuclear spins in the structure significantly improve the coherence. Thus, in compounds 1A, 1Bd and 1C, while the similar linkers ensure that h/J is similar for each, deuteration (1Bd) and confinement of hydrogen nuclei to rigid adamantyl groups (1C) result in extensions of the coherence times by factors of about four and three, respectively.
Discussion
From the data presented here, we may draw several conclusions supporting the assertion that molecular spin systems may form useful components in future quantum technologies. Molecular magnets offer building blocks which, through supramolecular chemistry, can be assembled into multi-qubit structures. Identifying strict criteria for the relative timescales for single-qubit manipulations, two-qubit interactions and phase memory times, we have designed several families of structures to optimise the prospects of hosting two-qubit devices. For example, in compound 1A, the phase coherence time of about 800 ns significantly exceeds the two-qubit gate time of 77 ns, and both are much longer than the typical single-qubit manipulation time of about 10 ns. Thus, we build upon the wide range of proposals to exploit molecular nanomagnets in quantum information by demonstrating for the first time coherent manipulation of dimers of such species, including multi-frequency experiments probing the inter-qubit interaction, and by showing that we can chemically tune the interaction strength to meet architectural requirements. This prepares the path for experiments demonstrating controlled entanglement operations (as opposed to the observation of entanglement as an inherent property of a singlet ground state of two coupled spins37), and other two-qubit manipulations.
References
Grover LK . Quantum mechanics helps in searching for a needle in a haystack. Phys Rev Lett 1997; 79: 325–328.
Shor PW . Polynomial-time algorithms for prime factorization and discrete logarithms on a quantum computer. SIAM J Comput 1997; 26: 1484–1509.
Nielsen MA & Chuang IL . Quantum Computation and Quantum Information. Cambridge University Press: Cambridge, 2000.
Feynman RP . Simulating physics with computers. Int J Theor Phys 1982; 21: 467–488.
DiVincenzo DP . The physical implementation of quantum computation. Fortsc Phys 2000; 48: 771–783.
Almeida Murphy T, Pawlik Th, Weidinger A, Höhne M, Alcala R & Paeth J-M . Observation of atomlike nitrogen in nitrogen-implanted C60 . Phys Rev Lett 1996; 77: 1075–1078.
Harneit W . Fullerene-based electron spin quantum computer. Phys Rev A 2002; 65: 032322.
Benjamin SC, Ardavan A, Briggs GAD, Britz DA, Gunlyke D, Jefferson J et al. Towards a fullerene-based quantum computer. J Phys Condens Matter 2006; 18: S867.
Morton JJL, Tyryshkin AM, Ardavan A, Benjamin SC, Porfyrakis K, Lyon SA et al. Bang-bang control of fullerene qubits using ultrafast phase gates. Nat Phys 2006; 2: 40–43.
Sato K, Nakazawa S, Rahimi R, Ise T, Nishida S, Yoshino T et al. Molecular electron-spin quantum computers and quantum information processing: pulse-based electron magnetic resonance spin technology applied to matter spin-qubits. J Mater Chem 2009; 19: 3739–3754.
Ayabe K, Sato K, Nishida S, Ise T, Nakazawa S, Sugisaki K et al. Pulsed electron spin nutation spectroscopy of weakly exchange-coupled biradicals: a general theoretical approach and determination of the spin dipolar interaction. Phys Chem Chem Phys 2012; 14: 9137–9148.
Leuenberger MN & Loss D . Quantum computing in molecular magnets. Nature 2001; 410: 789–793.
Tejada J, Chudnovsky EM, del Barco E, Hernandez JM & Spiller TP . Magnetic qubits as hardware for quantum computers. Nanotechnology 2001; 12: 181.
Meier F, Levy J & Loss D . Quantum computing with spin cluster qubits. Phys Rev Lett 2003; 90: 047901.
Troiani F, Ghirri A, Affronte M, Carretta S, Santini P, Amoretti G et al. Molecular engineering of antiferromagnetic rings for quantum computation. Phys Rev Lett 2005; 94: 207208.
Ardavan A & Blundell SJ . Storing quantum information in chemically engineered nanoscale magnets. J Mater Chem 2009; 19: 1754–1760.
Larsen FK, McInnes EJL, El Mkami H, Overgaard J, Piligos S, Rajaraman G et al. Synthesis and characterization of heterometallic {Cr7M} wheels. Angew Chem Int Ed 2003; 42: 101–105.
Ardavan A, Rival O, Morton JJL, Blundell SJ, Tyryshkin AM, Timco GA et al. Will spin relaxation times in molecular magnets permit quantum information processing? Phys Rev Lett 2007; 98: 057201.
Wedge CJ, Timco GA, Spielberg ET, George RE, Tuna F, Rigby S et al. Chemical engineering of molecular qubits. Phys Rev Lett 2012; 108: 107204.
Farrington BJ, Jevric M, Rance GA, Ardavan A, Khlobystov AN, Briggs GAD et al. Chemistry at the nanoscale: synthesis of an N@C60–N@C60 endohedral fullerene dimer. Angew Chem Int Ed 2012; 51: 3587–3590.
Plant SR, Jevric M, Morton JJL, Ardavan A, Khlobystov AN, Briggs GAD et al. A two-step approach to the synthesis of N@C60 fullerene dimers for molecular qubits. Chem Sci 2013; 4: 2971–2975.
Hill S, Edwards RS, Aliaga-Alcalde N & Christou G . Quantum coherence in an exchange-coupled dimer of single-molecule magnets. Science 2003; 302: 1015–1018.
Faust TB, Bellini V, Candini A, Carretta S, Lorusso G, Allan DR et al. Chemical control of spin propagation between heterometallic rings. Chem Eur J 2011; 17: 14020–14030.
Luis F, Repollés A, Martínez-Pérez MJ, Aguilà D, Roubeau O, Zueco D et al. Molecular prototypes for spin-based CNOT and SWAP quantum gates. Phys Rev Lett 2011; 107: 117203.
Aguila D, Barrios LA, Velasco V, Roubeau O, Repollés A, Alonso PJ et al. Heterodimetallic [LnLn′] lanthanide complexes: toward a chemical design of two-qubit molecular spin quantum gates. J Am Chem Soc 2014; 136: 14215–14222.
Lee C-F, Leigh DA, Pritchard RG, Schultz D, Teat SJ, Timco GA et al. Hybrid organic–inorganic rotaxanes and molecular shuttles. Nature 2009; 458: 314–318.
Garlatti E, Albring MA, Baker ML, Docherty RJ, Mutka H, Guidi T et al. A detailed study of the magnetism of chiral {Cr7M} rings: an investigation into parameterization and transferability of parameters. J Am Chem Soc 2014; 136: 9763–9772.
Wise MD, Ruggi A, Pascu M, Scopelliti R & Severin K . Clathrochelate-based bipyridyl ligands of nanoscale dimensions: easy-to-access building blocks for supramolecular chemistry. Chem Sci 2013; 4: 1658–1662.
Stoll S & Schweiger A . EasySpin, a comprehensive software package for spectral simulation and analysis in EPR. J Magn Reson 2006; 178: 42–55.
Timco GA, McInnes EJL, Pritchard RG, Tuna F & Winpenny REP . Heterometallic rings made from chromium stick together easily. Angew Chem Int Ed 2008; 47: 9681–9684.
Milov AD, Ponomarev AB & Tsvetkov Yu . Electron-electron double resonance in electron spin echo: model biradical systems and the sensitized photolysis of decalin. Chem Phys Lett 1984; 110: 67–72.
Pannier M, Veit S, Godt A, Jeschke G & Spiess HW . Dead-time free measurement of dipole–dipole interactions between electron spins. J Magn Reson 2000; 142: 331–340.
Schweiger A & Jeschke G . Principles of Pulse Electron Paramagnetic Resonance. Oxford University Press: Oxford, UK, 2001.
Schiemann O & Prisner TF . Long-range distance determinations in biomacromolecules by EPR spectroscopy. Quart Rev Biophys 2007; 40: 1–53.
Jeschke G & Polyhach Y . Distance measurements on spin-labelled biomacromolecules by pulsed electron paramagnetic resonance. Phys Chem Chem Phys 2007; 9: 1895–1910.
Jeschke G, Chechik V, Ionita P, Godt A, Zimmermann H, Banham J et al. DeerAnalysis2006—a comprehensive software package for analyzing pulsed ELDOR data. Appl Magn Reson 2006; 30: 473–498.
Candini A, Lorusso G, Troiani F, Ghirri A, Carretta S, Santini P et al. Entanglement in supramolecular spin systems of two weakly coupled antiferromagnetic rings (purple-Cr7Ni). Phys Rev Lett 2010; 104: 037203.
Acknowledgements
This work was supported by the EPSRC through the National EPR Service and grants EP/H012613/1, EP/H011714/1, and EP/L018470/1 and EP/K039547/1.
Author information
Authors and Affiliations
Contributions
AA, EJLM, CRT and REPW formulated the project. AF and GAT prepared the compounds, using clathrochelates prepared by MDW, AR and KS. GFSW and CAM performed the X-ray structure analysis. AMB, AJF, DK, FM and FT measured ESR data. AMB and DK analysed and interpreted data presented here. AA wrote the manuscript with substantial input from EJLM and REPW.
Corresponding author
Ethics declarations
Competing interests
The authors declare no conflict of interest.
Additional information
Supplementary Information accompanies the paper on the npj Quantum Information website (http://www.nature.com/npjqi)
Supplementary information
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Ardavan, A., Bowen, A., Fernandez, A. et al. Engineering coherent interactions in molecular nanomagnet dimers. npj Quantum Inf 1, 15012 (2015). https://doi.org/10.1038/npjqi.2015.12
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1038/npjqi.2015.12
This article is cited by
-
Experimental realisation of multi-qubit gates using electron paramagnetic resonance
Nature Communications (2023)
-
Lanthanide molecular nanomagnets as probabilistic bits
npj Computational Materials (2023)
-
The critical role of ultra-low-energy vibrations in the relaxation dynamics of molecular qubits
Nature Communications (2023)
-
Counteracting dephasing in Molecular Nanomagnets by optimized qudit encodings
npj Quantum Information (2021)
-
A dissymmetric [Gd2] coordination molecular dimer hosting six addressable spin qubits
Communications Chemistry (2020)