Article | Open

Expeditious diastereoselective synthesis of elaborated ketones via remote Csp3–H functionalization

  • Nature Communications 8, Article number: 13832 (2017)
  • doi:10.1038/ncomms13832
  • Download Citation
Received:
Accepted:
Published online:

Abstract

The quest for selective C–H functionalization reactions, able to provide new strategic opportunities for the rapid assembly of molecular complexity, represents a major focus of the chemical community. Examples of non-directed, remote Csp3–H activation to forge complex carbon frameworks remain scarce due to the kinetic stability and thus intrinsic challenge associated to the chemo-, regio- and stereoselective functionalization of aliphatic C–H bonds. Here we describe a radical-mediated, directing-group-free regioselective 1,5-hydrogen transfer of unactivated Csp3–H bonds followed by a second Csp2–H functionalization to produce, with exquisite stereoselectivity, a variety of elaborated fused ketones. This study demonstrates that aliphatic acids can be strategically harnessed as 1,2-diradical synthons and that secondary aliphatic C–H bonds can be engaged in stereoselective C–C bond-forming reactions, highlighting the potential of this protocol for target-oriented natural product and pharmaceutical synthesis.

Introduction

Strategies towards the efficient and selective activation of C–H bonds have been intensively explored in the context of chemical synthesis economy1. Direct C–H functionalizations are transformative as ubiquitous C–H bonds can be collected as functional group handles2,3 obviating the traditional requirement for functional group manipulation and exchange4. Multiple challenges still lay ahead, particularly in the case of Csp3–H bonds whose dissociation energy coupled with the energetic and spatial inaccessibility of the C–H bonding and antibonding orbitals makes them chemically inert (Fig. 1a1)5,6. To date, various methods for Csp3–H functionalization using transition metal catalysts have been developed, including directing group assisted C–H metalation (Fig. 1a2)7,8,9,10,11, and metal carbenoid or nitrenoid facilitated C–H insertion reactions via concerted12,13,14 or single-electron transfer processes (Fig. 1a3)15,16. Despite this broad array of methods, the field still faces significant challenges including the limited ability to discriminate between individual 3°, 2° or 1° C–H bonds, as well as the modest levels of stereocontrol commonly achieved in these transformations17. Nature seems to have solved these caveats with highly evolved enzymes that possess tridimensionally complex binding sites18. Small-molecule catalysts are not yet broadly applicable in highly functionalized chemical blueprints and thus, despite notable exceptions19,20, ambitious targets still remain far from straightforward reach via current Csp3–H functionalization methods. Radical-centred C–H functionalizations represent an alternative yet distinct option to activate isolated, aliphatic C–H bonds via an H-atom abstraction mechanism as seminally exemplified by the Hofmann–Löffler–Freytag reaction (Fig. 1a4)21,22. In this context, Csp3–H functionalizations using 1,n-H shifts rely on pre-performed radical precursors such as Csp2–halide bonds, azides, amidines and so on23,24,25,26,27,28, but due to the highly reactive nature of the free radical species involved, reaction control in terms of stereo- and site-selectivity remains challenging and thus applications in complex settings have been scarce.

Figure 1: Significance and rational design of the reaction.
Figure 1

(a) Bond dissociation energy of saturated C–H bonds. Strategies for Csp3–H activation. (b) Examples of elaborated fused ketones (and derivatives thereof) in bioactive molecules. (c) This work: stereoselective synthesis of elaborated ketones via space-enabled 1,5-H shift cascade.

Ketones are regarded as privileged functional groups from the viewpoint of their utility29 and ubiquity in a wide variety of biologically active natural products and pharmaceutical agents (Fig. 1b)30,31,32,33. Classical approaches to introduce ketones in complex scaffolds heavily rely on direct oxidation/reduction of other functional groups, including alcohols, alkenes, alkynes, carbonyl derivatives and nitriles. These protocols require time-consuming and labour-intensive processes to install the corresponding precursors and to pre-synthesize the original C-frameworks.

Here we present the straightforward preparation of complex ketones in a stereocontrolled manner capitalizing on the remote functionalization of Csp3–H bonds. We hypothesized that aliphatic carboxylic acids could be collected as 1,2-diradical synthons in the presence of vinyl azides34,35,36,37, through a radical-mediated decarboxylation process38,39. Notably, the reaction involves a regioselective, directing-group free activation of an unactivated aliphatic C–H bond via radical-mediated 1,5-hydrogen transfer and a Csp2–H functionalization relay via Minisci-type reaction40, a combination of steps thus far not reported in the literature (Fig. 1c). Secondary aliphatic C–H bonds, arguably the most difficult to oxidize selectively because of their bond strength, ubiquity and steric hindrance, can be engaged in a stereoselective C–C bond-forming unique cascade reaction that entitles the formation of two new C–C and one C=O bond streamlining the construction of fused ketone scaffolds present in a variety of bioactive molecules.

Results

Optimization of the reaction conditions

1-Methylcyclohexane-1-carboxylic acid and (1-azidovinyl)-benzene were selected as benchmark substrates to find the optimal reaction conditions. A preliminary screening confirmed the ability of catalytic amounts of silver in combination with a stoichiometric amount of oxidant to promote a radical decarboxylation process41,42. The substrates, combined in the presence of AgNO3 and K2S2O8 in acetonitrile for 10 h at 50 °C furnished the desired product (1a) in 5% yield (Table 1, entry 1). Other solvents were used with similar results (Table 1, entries 2 and 3). A more soluble silver salt such as Ag2CO3 was sought, which produced the desired product in 22% yield with acetone as solvent (Table 1, entry 4). The use of acetonitrile as a co-solvent in a 3:1 ratio, furnished 1a in a promising 53% yield, likely due to the improved solubility of all reaction components. Replacing acetonitrile with dimethylformamide or dichloromethane proved not to be beneficial (Table 1, entries 5–7). In sharp contrast, a change in the composition of the solvent mixture (acetone: CH3CN, 2.5:1) produced 1a in 58% yield (Table 1, entry 8). Basic additives (1 equivalent) were explored next revealing the positive effect of 2,6-lutidine in the reaction outcome (Table 1, entries 9–11). Finally, adjusting the amount of base to 1.2 equivalent furnished 1a in an optimized 69% isolated yield (Table 1, entry 12). It is important to remark that, in all cases, compound 1a was the only diastereoisomer detected in the crude reaction mixture.

Table 1: Optimization of the reaction conditions.

Substrate scope of the reaction

With the optimized reaction conditions in hand, we set out to explore the scope of this transformation. To this end, the substitution pattern on the aromatic ring of the vinyl azide was evaluated first (Table 2). The presence of electron withdrawing groups in para position to the vinyl azide moiety proved to be amenable to the standard reaction conditions as demonstrated by the efficiency of the reactions producing ketones 1b–d. The presence of fluorine, chlorine or bromine atoms at this position was also well accommodated as 1e–g could be isolated in good yields. These examples also showcase the functional group compatibility of this transformation as none of Csp2–F, –Cl, –Br bonds seems to affect (or interfere with) the desired reaction. Synthetically useful yields were also obtained with substrates bearing electron-donating groups at the para position (1h,i). An ortho-fluorobenzene vinyl azide could be efficiently engaged in this reaction, furnishing 1j in 72% yield. 3-Fluoro, 3,4-difluoro, 3-methyl and 3-methoxy substituted substrates produced 3,4-dihydronaphthalen-1(2H)-ones 1k–n in good yields with moderate ortho- regioselectivities. In contrast, 3-trifluoromethyl and 3-tertbutyl substituted substrates favoured the para-cyclized adducts 1o,p with improved 6:1 and >20:1 ratio, respectively. These results clearly indicate that the regioselectivity is dictated by both the steric and electronic nature of the meta-substituents in the starting material. A quinoline derivative could also be selectively incorporated as demonstrated by the successful reaction to produce 1q. X-ray diffraction analysis of 1a′ (obtained after reduction of the carbonyl group in 1a and p-NO2 benzoylation of the secondary alcohol) confirmed the structural assignment of the reaction products and the syn relative configuration of the only diastereoisomer observed in these transformations.

Table 2: Reaction scope on the vinyl azide.

Different aliphatic acids were studied next, and the results of these transformations have been summarized in Table 3. Five- and seven-membered tertiary carboxylic acids could be easily incorporated as demonstrated by the efficient transformations producing compounds 2a–c. The reaction furnishing 2a represents a straightforward route to the core structure of Hamigerans A and B, secondary metabolites with promising cytotoxic as well as potent antiviral activities (Fig. 1b)30,43. A tetrahydropyrane derivative (2d) could also be efficiently obtained in 56% yield. Acyclic substrates proved to be highly efficient partners in these transformations as well. Homobenzylic carboxylic acids bearing both electron-donating as well as electron-withdrawing groups could be efficiently coupled as demonstrated by the transformations producing 2e–j. Fully aliphatic acyclic starting materials were also amenable to the reported conditions as shown by the reactions yielding ketones 2k,l. Secondary carboxylic acids were also evaluated. A 2-tetrahydronaphthyl derivative produced the desired hexahydrochrysene-based ketone 2m in synthetically useful yield, whereas β,γ-disubstituted 3,4-dihydronaphthalen-1(2H)-ones 2n–p could be isolated in moderate to good yields as single diastereoisomers. The reaction protocol is also compatible with amino acids so that phenylalanine derivative 2q could be isolated in 53% yield. Both benzofurane and quinoline derivatives proved to be amenable to the standard reaction conditions in the presence of 2,2-dimethyl-3-phenylpropanoic acid, delivering tricyclic adducts 2r and 2s, respectively. X-ray diffraction analysis of 2n and 2s confirmed the structural assignment of the reaction products and the trans relative configuration of the only diastereoisomer observed in the reaction of secondary acyclic substrates.

Table 3: Reaction scope on the carboxylic acid.

Synthetic application

The synthetic utility of these transformations was further demonstrated by the efficient conversion of (tert-butoxycarbonyl)phenylalanine into tetralone 3. This compound provides a concise synthetic route (4 steps) to valuable molecules such as trans-1-phenyl-2-(dimethylamino)tetralin 4 (Fig. 2a). 4 and closely related compounds have been reported to be efficient ligands for human histamine H1-receptors with potential to treat neurodegenerative and neuropsychiatric disorders (Fig. 1b)44. X-ray diffraction analysis of 3 secured the relative configuration of the subsequent reaction products. We next sought to explore the possibility of applying this reaction in the context of a structure-diversification natural product synthesis setting45,46. To this end, we were pleased to observe the successful conversion of estrone-derived vinyl azide 5 with 2,2-dimethyl-3-phenylpropanoic acid into pentacyclic adduct 6 in overall 71% yield (Fig. 2b). These transformations highlight the potential of this methodology to broaden the structural diversity of highly complex biologically relevant blueprints and to impact structure-activity relationship (SAR) optimization in medicinal chemistry campaigns.

Figure 2: Synthetic applications.
Figure 2

(a) Concise synthesis of bioactive molecules. (b) Late-stage functionalization via backbone modification of a natural product. aSee Table 1, entry 12 for detailed conditions. bIsolated yields after column chromatography. cReaction conditions: (i) NaBH4 (1.3 equiv.), THF/MeOH, rt, 2 h; (THF, tetrahydrofuran; RT, room temperature) (ii) Pd/C (10 mol%), (NH4)O2CH (1 equiv.), HCO2H (4 equiv.), MeOH/H2O=4:1, 80 °C, 24 h, 81% for two steps; (iii) NaH (2 equiv.), MeI (3 equiv.), THF, 0 °C to rt, overnight, 92%; (iv) LiAlH4 (5 equiv), THF, reflux, 48 h, 84%. dRatio 3:1:1 corresponds to major regio- and diastereoisomer versus minor diastereo- and minor regioisomer, respectively. Major isomer was isolated in 45% yield.

Mechanistic investigation

Diverse control experiments were designed to shed light on the mechanism of these transformations (Fig. 3a,b). The reaction of 1-methylcyclohexane-1-carboxylic acid and (1-azidovinyl)benzene was inhibited in the presence of TEMPO or BHT (Fig. 3a). In addition, the reactions of acids bearing both 1° and 2° Csp3–H groups in β-position to the carboxylic groups (Tables 2 and 3) proved to be site-selective, favouring functionalization of –CH2– over –CH3– in all studied cases, a reactivity trend consistent with the homolytic C–H bond dissociation energy (BDEs). These observations suggest a radical mechanism operating in the key C–H abstraction step.

Figure 3: Mechanistic probes and deuterium-labelling experiments.
Figure 3

(a) Control experiments with radical inhibitors. (b) Control experiments using 2H-azirine 7 as starting material instead of vinyl azide. (c) Inter- and intramolecular KIE experiment.

2H-Azirines have been reported as intermediates in reactions involving vinyl azides as a result of the denitrogenative decomposition of the latter via vinyl nitrenes47,48. As shown in Fig. 3, 3-phenyl-2H-azirine 7 was not a productive partner under the standard conditions, which seems to rule out its participation in the present transformation (Fig. 3b). Deuterium-labelling experiments were also performed to gain additional mechanistic insights. A competition experiment was carried out using a 1:1 mixture of 2-methyl-3-phenylpropanoic acid 8 and its analogue 8-d2 (Fig. 3c). The formation of 2n and 2n-d1 was monitored by both 1H nuclear magnetic resonance (NMR) and mass spectrometry so that a kinetic isotope effect (KIE) of 2.2 could be determined in this experiment based on detected product ratios. An intramolecular KIE of 1.7 was measured in the reaction of 2-methyl-3-phenylpropanoic-3-d acid (8-d1) with methyl 4-(1-azidovinyl)benzoate under the standard reaction conditions (equation 4). Both sets of KIE experiments are consistent with a reaction mechanism in which C–H bond cleavage is rate-limiting49,50.

Density functional theory calculations were also carried out to gain additional insight into the reaction energy profile and the factors governing the observed stereoselectivity (Fig. 4). Ag(II) species are produced in situ as a result of the interaction of the silver(I) pre-catalyst with K2S2O8. In a single electron transfer (SET) process, the carboxylic acid is transformed into a radical cation I, which rapidly evolves via decarboxylation to produce II in a facile manner (TSI–II, ΔG<5 kcal mol−1)38,39,42,43. The alkyl radical intermediate undergoes addition onto the vinyl azide present in the reaction media to produce benzylic radical III (TSII–III, ΔG=12.2 kcal mol−1). Release of N2 is again highly favoured and results in the formation of imine radical IV (TSIII–IV, ΔG<5 kcal mol−1)34,35,36,37. Although a single-electron recombination of IV with the metal centre could be envisioned, the reaction outcome suggests that a 1,5-H migration on the secondary aliphatic C–H bonds to produce a C-centred radical V is preferred25,26. The TS for this process (TSIV–V) presents the higher barrier along the reaction coordinate with a ΔG=19.7 kcal mol−1, which signalized the 1,5-H migration as rate-limiting step in these reactions. The results summarized in Tables 2 and 3 highlight the site selectivity of the reaction in favour of CH2 versus CH3 groups, in line with the homolytic binding dissociation energies of the different Csp3–H bonds. Radical V reacts with the aromatic ring40 to produce, on formation of a second Csp2–Csp3 bond, bicyclic intermediate VI as a single diastereoisomer. The aromatic radical is oxidized with SO4 ˙−, yielding imine intermediate VII. The hydrolysis of VII takes place in the presence of water in the reaction media furnishing the observed products. As shown in Fig. 4, the base seems to tame the acidic pH generated in the reaction media preventing the degradation of both starting materials and productive reaction intermediates.

Figure 4: Mechanistic discussion.
Figure 4

(a) Proposed reaction mechanism and transition states computed at M06-2X/6-311++G(d,p) (iefpcm, solvent=acetone) level. Energies are given in kcal mol−1 (relative to the sum of the starting materials, GI+Gvinylazide=0 kcal mol−1). (b) Diastereoisomeric transition states for the cyclization step.

The exquisite stereoselectivity of the reaction can be rationalized on the basis of the different interactions that build up in the TS connecting V and VI. As shown in Fig. 4b, TSV–VIsyn is ca. 5 kcal mol−1 lower in energy than the corresponding TS TSV–VIanti as a result of the unfavourable steric interaction between the methyl group in axial relative position and the corresponding chain holding the aromatic ring (TSV–VIsyn ΔG=11.5 versus TSV–VIanti ΔG=16.4 kcal mol−1). Analogously, the cyclization step in the case of acyclic carboxylic acid favour the anti-relative configuration in the final products.

In summary, a straightforward route to a variety of elaborated fused ketones is presented here based on a radical-mediated stereoselective C–H functionalization relay strategy. The reaction proceeds through a 1,5-H shift enabled by a directing-group free remote Csp3–H activation, followed by a Csp2–H functionalization in an intricate radical cascade. The use of cost-effective vinyl azides and aliphatic acids circumvents the traditional multi-step synthesis of pre-functionalized H-radical shift precursor. Notably, aliphatic acids serve as 1,2-diradical equivalents in these transformations in which two C–C and one C=O bond are formed in a single synthetic operation. Our mechanistic study indicates that the 1,5-H shift is connected to the rate-determining step of these transformations. The synthetic utility of this methodology was successfully demonstrated by the efficient synthesis of bioactive molecules and late-stage functionalization of natural products. We anticipate that this work will open new possibilities of employing hydrogen shift as a useful synthetic tool for undirected inert aliphatic C–H activation in the context of both pharmaceuticals and natural product synthesis.

Methods

General

Supplementary Figs 1–44 for the NMR spectra, Supplementary Figs 45 and 46 for spectra of KIE experiments, Supplementary Figs 47–51 for X-ray diffraction for 1a′, 2n, 2s, 3 and 6, Supplementary Tables 1–22 for X-ray diffraction analysis data for 1a′, 2n, 2s, 3 and 6, Supplementary Table 23 for computational study and Supplementary Methods for characterization data can be found in the Supplementary Information.

General procedure for the reaction

Vinyl azide (0.3 mmol, 1.5 equiv.), carboxylic acid (0.2 mmol, 1.0 equiv.), Ag2CO3 (0.06 mmol, 0.3 equiv.) and K2S2O8 (0.4 mmol, 2.0 equiv.) were placed in a dry Schlenk tube. The reaction vessel was evacuated and filled with nitrogen three times. Acetonitrile (0.5 ml), acetone (0.2 ml), distilled water (1.5 ml) and 2,6-lutidine (0.24 mmol, 1.2 equiv.) were sequentially added at 25 °C. The reaction mixture was stirred at 50 °C for 10 h. The resulting mixture was extracted with EtOAc (15 ml) and the organic layer was washed with brine (10 ml), dried over anhydrous MgSO4, filtered and concentrated under reduced pressure. The crude product was purified by column chromatography on silica gel with hexane:ethyl acetate mixtures as eluent to give the corresponding products in pure form.

Data availability

The X-ray crystallographic coordinates for structures reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC) under deposition numbers 1504120, 1445931, 1481107, 1445926 and 1445932. These data can be obtained free of charge from The CCDC via www.ccdc.cam.ac.uk/data_request/cif. The authors declare that all other data supporting the findings of this study are available within the article and its Supplementary Information files.

Additional information

How to cite this article: Shu, W. et al. Expeditious diastereoselective synthesis of elaborated ketones via remote Csp3–H functionalization. Nat. Commun. 8, 13832 doi: 10.1038/ncomms13832 (2017).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

References

  1. 1.

    , & The economies of synthesis. Chem. Soc. Rev. 38, 3010–3021 (2009).

  2. 2.

    Adding aliphatic C–H bond oxidations to synthesis. Science 335, 807–809 (2012).

  3. 3.

    , , & Towards mild metal-catalyzed C–H bond activation. Chem. Soc. Rev. 40, 4740–4761 (2011).

  4. 4.

    & Palladium-catalyzed cross-coupling reactions in the synthesis of pharmaceuticals. Top. Organometallic Chem. 6, 205–245 (2004).

  5. 5.

    & Bond dissociation energies of organic molecules. Acc. Chem. Res. 36, 255–263 (2003).

  6. 6.

    Organometallic alkane C–H activation. J. Organomet. Chem. 689, 4083–4091 (2004).

  7. 7.

    & Palladium-catalyzed ligand-directed C-H functionalization reactions. Chem. Rev. 110, 1147–1169 (2010).

  8. 8.

    , , , & Transition metal-catalyzed C-H activation reactions: diastereoselectivity and enantioselectivity. Chem. Soc. Rev. 38, 3242–3272 (2009).

  9. 9.

    , & C–H Functionalization in organic synthesis. Chem. Soc. Rev. 40, 1855–1856 (2011).

  10. 10.

    & Catalytic functionalization of C(sp2)–H and C(sp3)–H bonds by using bidentate directing groups. Angew. Chem. Int. Ed. 52, 11726–11743 (2013).

  11. 11.

    , & Bidentate, monoanionic auxiliary-directed functionalization of carbon-hydrogen bonds. Acc. Chem. Res. 48, 1053–1064 (2015).

  12. 12.

    & Catalytic C–H functionalization by metal carbenoid and nitrenoid insertion. Nature 451, 417–424 (2008).

  13. 13.

    & Metal-catalyzed oxidations of C–H to C–N bonds. Top. Curr. Chem. 292, 347–378 (2010).

  14. 14.

    Recent advances in transition metal-catalyzed N-atom transfer reactions of azides. Org. Biomol. Chem. 8, 3831–3846 (2010).

  15. 15.

    et al. A manganese catalyst for highly reactive yet chemoselective intramolecular C(sp3)–H amination. Nat. Chem. 7, 987–994 (2015).

  16. 16.

    & Metal-catalysed azidation of tertiary C–H bonds suitable for late-stage functionalization. Nature 517, 600–604 (2015).

  17. 17.

    & If C–H bonds could talk: selective C–H bond oxidation. Angew. Chem. Int. Ed. 50, 3362–3374 (2011).

  18. 18.

    Ortiz de Montellano P. R. (ed.). Cytochrome P450: Structure, Mechanism, and Biochemistry4th edn (Springer, 2015).

  19. 19.

    & Combined effects on selectivity in Fe-catalyzed methylene oxidation. Science 327, 566–571 (2010).

  20. 20.

    & Total synthesis of eudesmane terpenes by site-selective C–H oxidations. Nature 459, 824–828 (2009).

  21. 21.

    Cyclization of N-halogenated amines (The Hofmann-Löffler reaction). Chem. Rev. 63, 55–64 (1963).

  22. 22.

    & sp3 C–H oxidation by remote H-radical shift with oxygen- and nitrogen-radicals: a recent update. Org. Biochem. Chem. 12, 4051–4060 (2014).

  23. 23.

    , , , & Intramolecular α-amidoyl to aryl 1,5-hydrogen atom transfer reactions. heteroannulation and α-nitrogen functionalization by radical translocation. J. Am. Chem. Soc. 112, 896–898 (1990).

  24. 24.

    , , , & Iron-catalyzed C−C bond formation at α-position of aliphatic amines via C−H bond activation through 1,5-hydrogen transfer. J. Am. Chem. Soc. 132, 5568–5569 (2010).

  25. 25.

    , , & Copper-catalyzed aerobic aliphatic C–H oxygenation directed by an amidine moiety. J. Am. Chem. Soc. 134, 11980–11983 (2012).

  26. 26.

    , & Copper-catalyzed benzylic C-H oxygenation under an oxygen atmosphere via N-H imines as an intramolecular directing group. Org. Lett. 13, 1622–1626 (2011).

  27. 27.

    & Complex N-heterocycle synthesis via iron-catalyzed, direct C–H bond amination. Science 340, 591–595 (2013).

  28. 28.

    , , , & Guided desaturation of unactivated aliphatics. Nat. Chem. 4, 629–635 (2012).

  29. 29.

    Chemistry of the Carbonyl Group: A Programmed Approach to Organic Reaction MechanismsWiley (1974).

  30. 30.

    , & Total synthesis of Hamigerans and analogues thereof. photochemical generation and Diels−Alder trapping of hydroxy-o-quinodimethanes. J. Am. Chem. Soc. 126, 613–627 (2004).

  31. 31.

    et al. Novel bioactive phenanthrene derivatives from domohinea perrieri. Tetrahedron 53, 15663–15670 (1997).

  32. 32.

    et al. Cytotoxic constituents of the roots of ekmanianthe longiflora. J. Nat. Prod. 63, 492–495 (2000).

  33. 33.

    & Chemoenzymatic collective synthesis of optically active hydroxyl(methyl)tetrahydronaphthalene based bioactive terpenoids. Org. Biomol. Chem. 13, 11331–11340 (2015).

  34. 34.

    , & Generation of iminyl radicals through sulfanyl radical addition to vinyl azides. J. Org. Chem. 62, 5846–5848 (1997).

  35. 35.

    , & From azides to nitrogen-centered radicals: a of azide radical chemistry to organic synthesis. Chem. Eur. J 15, 7830–7840 (2009).

  36. 36.

    & Vinyl and alkynyl azides: well-known intermediates in the focus of modern synthetic methods. Angew. Chem. Int. Ed. 51, 12169–12171 (2012).

  37. 37.

    , , & Mn(III)-mediated formal [3+3]-annulation of vinyl azides and cyclopropanols: a divergent synthesis of azaheterocycles. J. Am. Chem. Soc. 133, 6411–6421 (2011).

  38. 38.

    & Decarboxylative coupling reactions: a modern strategy for C–C-bond formation. Chem. Soc. Rev. 40, 5030–5048 (2011).

  39. 39.

    , & Visible-light-induced decarboxylative functionalization of carboxylic acids and their derivatives. Angew. Chem. Int. Ed. 54, 15632–15641 (2015).

  40. 40.

    Minisci reactions: Versatile CH-functionalizations for medicinal chemists. Med. Chem. Commun. 2, 1135–1161 (2011).

  41. 41.

    et al. Silver-catalyzed decarboxylative chlorination of aliphatic carboxylic acids. J. Am. Chem. Soc. 134, 4258–4263 (2012).

  42. 42.

    , , , & Silver-catalyzed decarboxylative radical azidation of aliphatic carboxylic acids in aqueous solution. J. Am. Chem. Soc. 137, 9820–9823 (2015).

  43. 43.

    , , & Chemistry of sponges. 19. Novel bioactive metabolites from Hamigera tarangaensis. J. Nat. Prod. 63, 79–85 (2000).

  44. 44.

    , , , & Novel ligands for the human histamine H1 receptor: Synthesis, pharmacology, and comparative molecular field analysis studies of 2-dimethylamino-5-(6)-phenyl-1,2,3,4-tetrahydronaphthalenes. Bioorg. Med. Chem. 14, 6640–6658 (2006).

  45. 45.

    et al. A ring-distortion strategy to construct stereochemically complex and structurally diverse compounds from natural products. Nat. Chem. 5, 195–202 (2013).

  46. 46.

    et al. Biology-oriented synthesis of a natural-product inspired oxepane collection yields a small molecule activator of the Wnt-pathway. Proc. Natl Acad. Sci. USA 108, 6805–6810 (2011).

  47. 47.

    , , & Synthesis of isoquinolines from α-aryl vinyl azides and internal alkynes by Rh–Cu bimetallic cooperation. Angew. Chem. Int. Ed. 50, 5927–5931 (2011).

  48. 48.

    & Visible-light sensitization of vinyl azides by transition-metal photocatalysis. Angew. Chem. Int. Ed. 53, 793–797 (2014).

  49. 49.

    & Combined oxypalladation/CH functionalization: palladium(II)-catalyzed intramolecular oxidative oxyarylation of hydroxyalkenes. Angew. Chem. Int. Ed. 51, 1926–1929 (2012).

  50. 50.

    et al. Silver-catalysed direct amination of unactivated C–H bonds of functionalized molecules. Nat. Commun. 5, 4707 (2014).

Download references

Acknowledgements

We thank the European Research Council (ERC Starting grant agreement no 307948) for financial support. We thank Prof Dr Anthony Linden for the X-Ray crystal structure determinations. We also thank IZO-SGI SGIker of UPV/EHU for human and technical support.

Author information

Affiliations

  1. Department of Chemistry, University of Zürich, Winterthurerstrasse 190, CH-8057 Zürich, Switzerland

    • Wei Shu
    • , Adriana Lorente
    •  & Cristina Nevado
  2. Departamento de Química Orgánica I, Universidad del Pais Vasco, Apdo 1072, CP-20080 Donostia—San Sebastián, Spain

    • Enrique Gómez-Bengoa

Authors

  1. Search for Wei Shu in:

  2. Search for Adriana Lorente in:

  3. Search for Enrique Gómez-Bengoa in:

  4. Search for Cristina Nevado in:

Contributions

W.S., A.L. carried out the experimental work; E.G.-B. carried out computational work; W.S., A.L., E.G.-B. and C.N. wrote the manuscript; C.N. guided the research.

Competing interests

The authors declare no competing financial interests.

Corresponding author

Correspondence to Cristina Nevado.

Supplementary information

PDF files

  1. 1.

    Supplementary Information

    Supplementary figures, supplementary tables, supplementary methods and supplementary references.

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Creative Commons BYThis work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/