Abstract
In bulk superfluid 3He at zero magnetic field, two phases emerge with the B-phase stable everywhere except at high pressures and temperatures, where the A-phase is favoured. Aerogels with nanostructure smaller than the superfluid coherence length are the only means to introduce disorder into the superfluid. Here we use a torsion pendulum to study 3He confined in an extremely anisotropic, nematically ordered aerogel consisting of ∼10 nm-thick alumina strands, spaced by ∼100 nm, and aligned parallel to the pendulum axis. Kinks in the development of the superfluid fraction (at various pressures) as the temperature is varied correspond to phase transitions. Two such transitions are seen in the superfluid state, and we identify the superfluid phase closest to Tc at low pressure as the polar state, a phase that is not seen in bulk 3He.
Similar content being viewed by others
Introduction
Superfluid 3He is our best example of a quantum system, where the fermionic constituents form Cooper pairs with finite angular momentum. Similar to unconventional superconductors, such as Sr2RuO4 and UPt3 (refs 1, 2), the properties of this exotic superfluid can be engineered with disorder3,4. Theory predicts that nanoscale confinement and anisotropic disorder profoundly change the stability of the pairing, and can lead to novel phases5,6,7,8.
Two superfluid phases—the A and B phases are observed in bulk 3He when it is cooled to ultralow temperatures (below 0.902–2.444 mK depending on the pressure)9. At these temperatures, bulk 3He is an extremely pure system free of any disorder: anything besides helium is solid and condenses on the surfaces, and 4He phase separates with practically zero solubility in the 3He. To deliberately introduce disorder, one can embed the fluid in highly porous aerogels10,11. For 3He in aerogel, Tc is suppressed and the relative stability of the A and B phases is markedly different compared with the bulk. The phase diagram is further distorted when weak anisotropy is introduced by compressing or stretching the aerogel3,12,13,14. In the experiment described here, we embed the fluid within a highly oriented nematic aerogel15,16,17, which provides extreme anisotropy. Nuclear magnetic resonance (NMR) experiments15,16,17 identify the resulting phases as polar-distorted A and B phases. Evidence for a novel polar phase was recently observed in a NMR measurement of a different high-density nematic aerogel18. In our experiments, the aerogel is mounted on a torsion pendulum and the strands that comprise the aerogel are aligned parallel to the pendulum axis. This technique is very different from NMR and is specifically sensitive to the in-plane superfluid fraction. Spin diffusion measurements in an aerogel sample similar to the one we study reveal that the mean-free path for a particle travelling along the strands is nearly twice that of one moving perpendicular19. From the period of this pendulum, we measure the fraction of the fluid that is decoupled from the container, which is related to the superfluid fraction. As we vary the temperature and pressure, we observe kinks when superfluid fraction is plotted versus temperature, corresponding to phase transitions. We find a new superfluid phase just below the normal to superfluid transition that is not seen in bulk 3He. Drawing on theoretical work4,5,20,21, we argue that at low pressure this new superfluid phase is the polar phase.
Results
Microstructure of the nematic aerogel
Scanning electron microscope images of the aerogel sample showing its highly oriented microstructure are shown in Fig. 1a,b. We estimate that the aerogel consists of ∼10 nm-thick strands, spaced ∼100 nm apart.
Ginzburg–Landau model
The order parameter for 3He is a rank-2 tensor describing the spin and orbital angular momentum of the pairs. In the bulk A-phase, the orbital angular momentum points in a fixed direction, and there exist gapless excitations whose momenta are parallel to this direction. In the B-phase, the superfluid gap is isotropic and nonzero in all directions around the Fermi surface. The polar phase, which is not stable in bulk 3He, has a nodal plane: for any momentum direction in this plane, one can find gapless quasiparticles. Larger superfluid densities are associated with having fewer low-energy excitations, allowing us to distinguish these phases. Figure 2a shows the bulk phase diagram, and Fig. 2b gives a visual representation of the superfluid energy gaps in the various phases.
Following convention, we represent the order parameter as a 3 × 3 matrix A with components related to the coupling of the x, y and z components of the spin and orbital angular momentum. All three phases that we see are captured by the ansatz . The conventional bulk A-phase corresponds to Ay=A|| and A⊥=0. Similarly, the isotropic B-phase has A⊥=A|| and Ay=0. The polar phase has A⊥=Ay=0. Guided by the form of the Ginsburg–Landau (GL) free energy in refs 4, 20, we write the free energy for this system including the fourth-order terms scaled by the appropriate coefficients βi as follows:
Here is the value of the condensation energy, and Tc and Tcbulk the superfluid transition temperatures for the fluid within the aerogel and the bulk fluid, respectively. The anisotropy in the system is parameterized by δ. The nonzero value of δ leads to two distinct transition temperatures, Tc⊥ and Tc||=Tc, below which the components of the order parameter perpendicular and parallel to the aerogel anisotropy axis develop. The effect of the anisotropy of the system splitting the superfluid transition has been observed for Sr2RuO4 under uniaxial strain22. More precisely δ can be defined as:
In the linear pair-breaking regime, δ is given by ref. 4:
with ξ0 being the zero-temperature coherence length, which is a measure of the strength of the pairing and λ⊥,|| being the quasi-particle mean-free path perpendicular or parallel to the strands.
For Tc⊥<T<Tc||, this GL theory predicts that the system will be in the polar phase (A⊥,y=0, A||>0). For lower temperature, one finds either a distorted A-phase, where A⊥=0 and A||>Ay>0 or a distorted B-phase, where Ay=0 and A||>A⊥>0. The relative stability of these phases depends on the magnitude of the β terms in equation (1). Quasi-particle mean-free paths in the nematic aerogel are expected to be relatively long (>450 nm (ref. 19)), compared with the mean-free paths of ordinary silica aerogel (∼100 nm). Thus, we assume that the β parameters are only weakly affected by the disorder, and in our analysis, we use the bulk values given in ref. 23.
The degree of polar distortion can be parameterized by Ay/A|| in the A-phase and A⊥/A|| in the B-phase. Both these ratios become smaller at lower pressures (corresponding to more polar distortion), and all three phases become less distinct. The A-to-B transition is first order and is hysteretic, while A-to-polar or B-to-polar transition is second order and should be free of hysteresis. Recent theoretical work argues that this Ginzburg–Landau theory may breakdown at high pressures, with several competing possibilities for the high-temperature phase21. Our measurements suggest that this breakdown does indeed occur, but they cannot distinguish between the various possible high-temperature phases.
Evidence for phase transitions in superfluid fraction data
Our torsional oscillator experiment probes the superfluid density in the direction perpendicular to the pendulum axis, and hence perpendicular to the aerogel strands. Data for the superfluid fraction versus T/Tcbulk for six different pressures ranging from 32 bar, down to 0.1 bar are shown in Fig. 3a. At high pressures (32, 29.1 and 15.4 bar), a clear hysteresis loop is seen between warming and cooling, indicating a first-order phase transition. Guided by the results from NMR experiments done on a similar sample15,16,17 and by the GL model predictions, we identify these as polar-distorted B and polar-distorted A. As pressure is lowered, the hysteresis loop gets less pronounced, indicating a larger degree of polar distortion. Experimental uncertainty in our data is characterized by the relative spread of the data points. In addition, a small systematic error could arise due to the possible thermal lag between our thermometer and the experimental cell. Differences between cooling and warming at 3.6 and 0.1 bar are attributed to this systematic error.
At temperatures slightly above the hysteresis loop, on both cooling and warming, we observe a change in slope in the superfluid fraction versus T. The change in slope is especially pronounced at low pressures. We label the temperature of this feature as Tkink. At 7.5 bar (Fig. 3b), data for cooling and warming overlap at low temperatures and near Tc. A difference between the cooling and warming traces larger than the experimental uncertainty is observed at intermediate temperatures. This difference is too large to be due to thermal lag. Instead, we associate the difference with an A-to-B transition. In addition, we observe a very sharp and pronounced kink in the superfluid fraction data. Thus, we conclude that there are three superfluid phases present. Near Tc a high-temperature phase is stable, which transitions on cooling to a distorted A phase. Cooling through the region of hysteresis the distorted A-phase transitions to a distorted B-phase. On warming, the distorted B-phase persists through the region of hysteresis until it transitions to the high-temperature phase just below Tc. We identify Tkink as the temperature of the phase transition between a high-temperature superfluid phase and A or B phase. No hysteresis is associated with the transition at Tkink, therefore the transition is second order. The superfluid phase right below Tc is identified by NMR as an equal spin pairing phase15,16,17 (both the A-phase and polar phase are characterized by equal spin pairing).
Discussion
To test whether Tkink is related to Tc⊥, we look for the value of the anisotropy parameter δ in equation (1) such that we obtain the best match between the predicted values for Tc⊥ and the observed Tkink. The resulting value for δ is of a similar magnitude compared with the one predicted in equation (3), as we insert the values for λ⊥,|| measured by spin diffusion (450 and 850 nm)19. Tkink conforms to our prediction for Tc⊥ reasonably well at low pressures (0.1, 3.6, 7.5 and 15.4 bar). At high pressures (29.1 and 32 bar), the agreement is not as good and the kink is seen at lower temperatures than the predicted location of Tc⊥. Minimizing the Ginzburg–Landau free energy in equation (1), we obtain the values for the equilibrium order parameter A and calculate the expected superfluid fraction (Supplementary Note 1). The calculated values, guided by our model, assume a transition from a pure polar to a polar-distorted A or B phase (and not merely a crossover) and a degree of superfluid order parameter suppression due to the proximity of the aerogel strands (Supplementary Note 1; Supplementary Fig. 1). We see very good agreement, especially at low pressures, between the data and calculated values (Fig. 3c). This leads us to conclude that at low pressures, the high-temperature phase has characteristics that correspond to the polar phase, while at high pressures it has additional structure. The system thus displays characteristics of two distinct transitions associated (by G-L theory) with the highly anisotropic mean free paths. The first transition is from the normal to the pure Polar phase and the second to the low temperature A or B phase. These latter phases evolve continuously with diminishing polar distortion as the temperature is lowered. This interpretation is also consistent with NMR measurements, which were done with an aerogel sample that was grown by the same process as ours. They found a larger frequency shift at low pressures than at high pressures15,16,17. Such an evolution of the frequency shift is consistent with a polar-like phase evolving into another structure, but even at the lowest pressures, the frequency shift observed in the NMR measurements was somewhat smaller than what one expects for a pure polar phase. Furthermore, by exposing the superfluid to a rapid series of large NMR pulses, the Moscow group managed to create a spin glass state between the A and B transition and Tc. A spin glass state cannot be created in the polar phase. We note, however, beyond the possibility of aerogel sample differences, the differences of the interpretation between the NMR measurements and this experiment can be explained the following way. If there is a coexistence of a polar and A-phase localized in different parts of the sample, NMR would measure a spatial average that would appear as a highly polar-distorted A-phase. In contrast, torsion pendulum experiments probe the component of the superfluid fraction tensor in the flow direction perpendicular to the aerogel strands. The superfluid density samples the gap along the equatorial nodal line of the Fermi surface leading to the strong superfluid fraction suppression. Even if not all the fluid in the torsion pendulum head is in the polar phase, as long as there is no path connecting the regions of non-polar phase throughout the pendulum head, the superfluid fraction suppression would still be similar to that of the case of having only polar phase in the sample. Torsion pendulum measurements are thus inherently more sensitive to the presence of the polar phase compared with NMR. In addition, the Moscow group recently observed clear evidence for a fully polar phase of superfluid 3He embedded in a different type of nematic aerogel using NMR18. Both results confirm the prediction that the strong anisotropy of the nematically ordered aerogel matrix promotes the emergence of the polar phase5.
We summarize the observed phase transitions and our inferences for the natures of the superfluid phases occupying each region of the phase diagram in Fig. 4a,b.
In this article, we have described a series of experiments that reveal striking new phenomena in the superfluid phases of 3He embedded in a highly oriented aerogel. Both A and B phases are polar-distorted compared with their bulk counterparts, and their region of stability is markedly different compared with the bulk. We see a high-temperature phase that has no analogue in the bulk. We argue that at low pressures, this superfluid is the polar phase.
Methods
Sample preparation and experimental set-up
The aerogel was grown at theLeypunsky Institute of Physics and Power Engineering in Obninsk, Russia, using the same recipe as the aerogel sample used in refs 15, 16, 17, but from a different batch. The aerogel sample had an estimated density of ∼30 g cm−3. Its physical properties and method of growth are described in ref. 24. Aerogel was cut into the shape of a cube with sides of ∼5 mm and coated with epoxy. The epoxy used (Tra-bond 2151) had high viscosity and high contact angle with the aerogel surface, which prevented the epoxy from being drawn into the aerogel voids by capillary action. The rest of the torsion pendulum head in which the coated aerogel sample was encapsulated was made from Stycast 1266 epoxy. The torsion rod and the body of the pendulum were made from annealed coin silver (90% silver and 10% copper). Photographs of the torsion pendulum are shown in the Supplementary Fig. 2. We drove and detected the pendulum motion electrostatically, keeping it close to resonance using a digital phase locked loop. The resonant frequency of the mode we excited the pendulum at was ∼476 Hz and the quality factor ranged from 105 to 7 × 105 at mK temperatures. Upon cooling the pendulum below the superfluid transition, the superfluid fraction of the fluid in the aerogel decouples from the pendulum and a decrease in its period is observed. The ratio of the moment of inertia of the fluid in the aerogel sample to the moment of inertia of the rest of the pendulum was about 1 part in 104. We can resolve the period to ∼1 part in 107 giving us ample resolution to resolve the superfluid fraction ρs/ρ.
4He coverage
Measurements for 7.5, 15.4, 29.1 and 32 bar were done with pure 3He. Because measurements in Moscow were done after the aerogel strands were preplated with 2.5 atomic layers of 4He, we also carried out measurements with 4He added (∼2 layers). Data for 0.1 and 3.6 bar as well as repeated measurements at 15.4 and 29.1 bar were taken with 4He preplating. No substantial change in the transition temperatures at 15.4 and 29.1 bar was seen between measurements with or without preplated 4He surfaces. It is not clear if the 4He changed the specularity at the aerogel surface. Preplating with 4He, however, changed the spectrum of the sound modes present in the fluid (more details on the sound modes can be found in Supplementary Note 2). Sound mode resonances can reveal differences in superfluid textures between the different superfluid states as discussed in Supplementary Note 3 and illustrated by Supplementary Fig. 3.
Determination of superfluid fraction from the period shift
Because the shape of the aerogel sample is not rotationally symmetric, the fluid in the corners will contribute to the pendulum moment of inertia even in the superfluid state. To account for this and also for the entrainment of the fluid by the strands of aerogel (Kelvin drag), we calibrated the superfluid fraction by filling the sample with pure 4He. Because the healing length of 4He is ∼0.1 nm, it is expected that the entire sample should be superfluid (aside from 1 to 2 monolayers of disordered solid on the surfaces). Thus, from a measurement of the frequency of the empty cell, of the pendulum above the lambda transition, and at low temperatures well below the superfluid transition temperature for 4He, we determined that three quarters of the fluid inertia decoupled.
The bottom part of the aerogel cube was not fully coated with epoxy to allow the fluid to enter the aerogel, leaving a small gap in the pendulum head that would be occupied by bulk fluid. In addition, the aerogel was grown in layers, and in the scanning electron microscope images of our samples, cracks with the sizes of a few microns were observed between some of the layers, with bulk fluid filling those cracks. We estimate that ∼3% of the inferred superfluid fraction came from the bulk fluid, with this contribution to be subtracted out. See Supplementary Note 4 and Supplementary Fig. 4 for more details on the estimated amount of bulk fluid.
The superfluild fraction was determined from the period of the torsion pendulum, P(T), through the following expression:
where ΔP(T) is the difference between the period of the pendulum when all the fluid is fully locked—Pfull and the measured period of the torsion pendulum—P(T). At Tc, the viscous penetration depth of 3He is ∼1 mm, many orders of magnitude larger than the distance between the aerogel strands (∼100 nm), so we can assume that all the fluid is fully coupled with the pendulum. ΔPfluid is equal to the difference in the pendulum period between filled, Pfull (T), and empty, Pempty. ΔPfluid should scale linearly with the density of the fluid. When the sample is pressurized, the axis of the pendulum distorts slightly. To avoid any error due to this, we determine the slope of ΔPfluid versus ρ through the measured values of (P(Tc at 0.1 bar of 3He)—Pempty) and of (P(Tλ at 1 bar of 4He)—Pempty) and scale ΔPfluid for the other experimental pressures by accounting for the appropriate 3He density at that pressure.
Data availability
The data that support this study are available through Cornell University e-commons data repository at http://hdl.handle.net/1813/44555.
Additional information
How to cite this article: Zhelev, N. et al. Observation of a new superfluid phase for 3He embedded in nematically ordered aerogel. Nat. Commun. 7, 12975 doi: 10.1038/ncomms12975 (2016).
References
Mackenzie, A. P. & Maeno, Y. The superconductivity of Sr2RuO4 and the physics of spin-triplet pairing. Rev. Mod. Phys. 75, 657 (2003).
Dalichaouch, Y. et al. Impurity scattering and triplet superconductivity in UPt3 . Phys. Rev. Lett. 75, 3938 (1995).
Pollanen, J. et al. New chiral phases of superfluid 3He stabilized by anisotropic silica aerogel. Nat. Phys. 8, 317–320 (2012).
Sauls, J. A. Chiral phases of superfluid 3He in an anisotropic medium. Phys. Rev. B 88, 214503 (2013).
Aoyama, K. & Ikeda, R. Pairing states of superfluid 3He in uniaxially anisotropic aerogel. Phys. Rev. B 73, 060504(R) (2006).
Thuneberg, E. V., Yip, S. K., Fogelström, M. & Sauls, J. A. Models for superfluid 3He in aerogel. Phys. Rev. Lett. 80, 2861 (1998).
Wiman, J. J. & Sauls, J. A. Superfluid phases of 3He in a periodic confined geometry. J. Low Temp. Phys. 175, 17–30 (2014).
Sauls, J. A. & Vorontsov, A. B. Crystalline order in superfluid 3He films. Phys. Rev. Lett. 98, 045301 (2007).
Vollhardt, D. & Wölfle, P. The Superfluid Phases of Helium 3 Dover Publications (2013).
Porto, J. V. & Parpia, J. M. Superfluid 3He in aerogel. Phys. Rev. Lett. 74, 4667 (1995).
Sprague, D. T. et al. Homogeneous equal-spin pairing superfluid state of 3He in aerogel. Phys. Rev. Lett. 75, 661 (1995).
Bennett, R. G. et al. Modification of the 3He phase diagram by anisotropic disorder. Phys. Rev. Lett. 107, 235504 (2011).
Elbs, J., Bunkov, Y. M., Collin, E., Godfrin, H. & Volovik, G. E. Strong orientational effect of stretched aerogel on the 3He order parameter. Phys. Rev. Lett. 100, 215304 (2008).
Dmitriev, V. V. et al. Orbital glass and spin glass states of 3He-A in aerogel. JETP Lett. 91, 669–675 (2010).
Askhadullin, R. Sh. et al. Phase diagram of superfluid 3He in ‘nematically ordered’ aerogel. JETP Lett. 95, 355–360 (2012).
Dmitriev, V. V., Senin, A. A., Soldatov, A. A., Surovtsev, E. V. & Yudin, A. N. B phase with polar distortion in superfluid 3He in ‘ordered’ aerogel. JETP Lett. 119, 1088–1096 (2014).
Askhadullin, R. Sh. et al. Anisotropic 2D Larkin-Imry-Ma state in polar distorted ABM phase of 3He in ‘nematically ordered’ aerogel. JETP Lett. 100, 747–753 (2014).
Dmitriev, V. V., Senin, A. A., Soldatov, A. A. & Yudin, A. N. Polar phase of superfluid 3He in anisotropic aerogel. Phys. Rev. Lett. 115, 165304 (2015).
Askhadullin, R. Sh. et al. Measurements of spin diffusion in liquid 3He in ‘ordered’ aerogel. J. Phys. Conf. Ser. 400, 012007 (2012).
Fomin, I. A. Phenomenological phase diagram of superfluid 3He in a stretched aerogel. JETP Lett. 118, 765–770 (2014).
Ikeda, R. Anisotropic strong-coupling effects on superfluid 3He in aerogels: conventional spin-fluctuation approach. Phys. Rev. B 91, 174515 (2015).
Hicks, C. W. et al. Strong increase of Tc of Sr2RuO4 under both tensile and compressive strain. Science 344, 283–285 (2014).
Choi, H., Davis, J. P., Pollanen, J., Haard, T. M. & Halperin, W. P. Strong coupling corrections to the Ginzburg-Landau theory of superfluid 3He. Phys. Rev. B 75, 174503 (2007).
Asadchikov, V. E. et al. Structure and properties of ‘nematically ordered’ aerogels. JETP Lett. 101, 556–561 (2015).
Acknowledgements
We are grateful to V.V. Dmitriev, J.A. Sauls and J. Saunders for discussion, R.Sh. Askhadullin, P.N. Martynov and A.A. Osipov for providing the sample of Obninsk aerogel, and to the National Science Foundation, via DMR 1202991 and PHY 1508300, for support.
Author information
Authors and Affiliations
Contributions
Experimental work and analysis was principally carried out by N.Z. assisted by T.S.A. with further support from E.N.S. and J.M.P. Ginzburg–Landau theoretical fits to the data were performed by M.R. under the supervision of E.J.M. Electron microscopy imaging of the aerogel sample was performed by K.X.N. and N.Z.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures 1-4, Supplementary Notes 1-4 and Supplementary References (PDF 289 kb)
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Zhelev, N., Reichl, M., Abhilash, T. et al. Observation of a new superfluid phase for 3He embedded in nematically ordered aerogel. Nat Commun 7, 12975 (2016). https://doi.org/10.1038/ncomms12975
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms12975
This article is cited by
-
Thermal transport of helium-3 in a strongly confining channel
Nature Communications (2020)
-
Half-quantum vortices and walls bounded by strings in the polar-distorted phases of topological superfluid 3He
Nature Communications (2019)
-
Spin, Orbital, Weyl and Other Glasses in Topological Superfluids
Journal of Low Temperature Physics (2019)
-
Recent Progress and New Challenges in Quantum Fluids and Solids
Journal of Low Temperature Physics (2017)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.