Featured
-
-
Article
| Open AccessForecast and analysis of aircraft passenger satisfaction based on RF-RFE-LR model
- Xuchu Jiang
- , Ying Zhang
- & Biao Zhang
-
Article
| Open AccessPerformance improvement and thermodynamic assessment of microchannel heat sink with different types of ribs and cones
- Shizhong Zhang
- , Faraz Ahmad
- & Mohamed Badran
-
Article
| Open AccessModelling vibro–acoustic response of lightweight square aluminium panel influenced by sound source locations for active control
- Chukwuemeke William Isaac
- , Stanislaw Wrona
- & Hamid Reza Karimi
-
Article
| Open AccessDesign and development of non-magnetic hierarchical actuator powered by shape memory alloy based bipennate muscle
- Kanhaiya Lal Chaurasiya
- , A. Sri Harsha
- & Bishakh Bhattacharya
-
Article
| Open AccessNumerical modeling of dielectric barrier discharge actuators based on the properties of low-frequency plasmons
- D. Soltani Tehrani
- , G. R. Abdizadeh
- & S. Noori
-
Article
| Open AccessEffect of thermal treatment at high temperature on phase stability and transformation of Yb2O3 and Y2O3 co-doped ZrO2 ceramics
- Zheng Cao
- , Shengli An
- & Xiwen Song
-
Article
| Open AccessA novel non-destructive testing method for turbine disks using dual array ultrasonic transducer
- Lichen Teng
- & Zhenggan Zhou
-
Article
| Open AccessPreventing a global transition to thermoacoustic instability by targeting local dynamics
- Nitin Babu George
- , Manikandan Raghunathan
- & Elena Surovyatkina
-
Article
| Open AccessPost-resonance backward whirl analysis in cracked overhung rotors
- Tariq Alzarooni
- , Mohammad AL-Shudeifat
- & C. Nataraj
-
Article
| Open AccessStudy on mechanism of improving efficiency of permanent-magnet small ball-end magnetorheological polishing by increasing magnetorheological fluid temperature
- Jinchuan Tian
- , Mingjun Chen
- & Yazhou Sun
-
Article
| Open AccessOn implementation of a semi-analytic strategy to develop an analytical solution of a steady-state isothermal tube drawing model
- Azhar Iqbal Kashif Butt
- , Nehad Ali Shah
- & Naeed Ahmad
-
Article
| Open AccessShock wave formation from head-on collision of two subsonic vortex rings
- Rachel L. Bauer
- , Cody J. Thomas
- & Catherine E. Johnson
-
Article
| Open AccessUnveiling the dynamics of ultra high velocity droplet impact on solid surfaces
- Giovanni Tretola
- & Konstantina Vogiatzaki
-
Article
| Open AccessA method for continuous study of soaring and windhovering birds
- Matthew Penn
- , George Yi
- & Abdulghani Mohamed
-
Article
| Open AccessInfluence of roundness errors of bearing components on rotational accuracy of cylindrical roller bearings
- Yongjian Yu
- , Jishun Li
- & Yujun Xue
-
Article
| Open AccessMethods for numerical simulation of knit based morphable structures: knitmorphs
- Sangram K. Rout
- , Marisa Ravena Bisram
- & Jian Cao
-
Article
| Open AccessComputational characterization of the behavior of a saliva droplet in a social environment
- Ainara Ugarte-Anero
- , Unai Fernandez-Gamiz
- & Oskar Urbina-Garcia
-
Article
| Open AccessSINS/BDS tightly coupled integrated navigation algorithm for hypersonic vehicle
- Kai Chen
- , Sen-sen Pei
- & Gang Ding
-
Article
| Open AccessMulti-fidelity information fusion with concatenated neural networks
- Suraj Pawar
- , Omer San
- & Trond Kvamsdal
-
Article
| Open AccessComputer-aided optimal design for flexible cable in aerospace products based on dynamic analogy modeling
- Hongwang Du
- , Qinwen Jiang
- & Wei Xiong
-
Article
| Open AccessAnalytic simulation of thermophoretic second grade fluid flow past a vertical surface with variable fluid characteristics and convective heating
- Nehad Ali Shah
- , Se-Jin Yook
- & Oreyeni Tosin
-
Article
| Open AccessApplying the perturbative integral in aeromaneuvers around Mars to calculate the cost
- Jhonathan O. Murcia Piñeros
- , Antônio F. Bertachini de Almeida Prado
- & Rodolpho Vilhena de Moraes
-
Article
| Open AccessMutually guided light and particle beam propagation
- Andres M. Castillo
- , Prabhat Kumar
- & Kentaro Hara
-
Article
| Open AccessConstitutive modeling of an electro-magneto-rheological fluid
- Deepak Kumar
- & Somnath Sarangi
-
Article
| Open AccessZ-folding aircraft electromagnetic scattering analysis based on hybrid grid matrix transformation
- Zeyang Zhou
- & Jun Huang
-
Article
| Open AccessDesign of robust cubature fission particle filter algorithm in multi-source cooperative navigation
- Wei Sun
- & Jingzhou Liu
-
Article
| Open AccessTransient CFD analysis of fuel siphoning under a sudden inertial load
- Kang-Sik Bae
- & Edwin L. Blosch
-
Article
| Open AccessMultipoint monitoring of amplitude, frequency, and phase of vibrations using concatenated modal interferometers
- Kalipada Chatterjee
- , Venugopal Arumuru
- & Rajan Jha
-
Article
| Open AccessMeasurement of the mass-flow-rate characterization parameters of high-pressure pneumatic servo slide valves
- Dijia Zhang
- , Longlong Gao
- & Baoren Li
-
Article
| Open AccessControl method of stepping motor for spaceborne solar irradiance spectrometer
- Yan Wang
- , Jianing Wang
- & Yu Huang
-
Article
| Open AccessData-driven analysis and new findings on the loss of tail rotor effectiveness in helicopter accidents
- Joseph Homer Saleh
- , Zhaoyi Xu
- & Martin Ma
-
Article
| Open AccessExperimental investigations into the performance of die-sinking mixed-gas atomization discharge ablation process on titanium alloy
- Linglei Kong
- , Weining Lei
- & Zhidong Liu
-
-
Article
| Open AccessNeuro-adaptive augmented distributed nonlinear dynamic inversion for consensus of nonlinear agents with unknown external disturbance
- Sabyasachi Mondal
- & Antonios Tsourdos
-
Article
| Open AccessFormulating a multi-layered framework for automobile architecture
- Sushil Chandra
-
Article
| Open AccessThe vibration response mechanism of a blade disk rotor system under the coupling effects of cracks and aerodynamic forces
- J. Yang
- , J. Xie
- & J. Chen
-
Article
| Open AccessWear-adaptive optimization of in-process conditioning parameters during face plunge grinding of PcBN
- Berend Denkena
- , Alexander Krödel-Worbes
- & Dominik Müller-Cramm
-
Article
| Open AccessComparison of parallel infill sampling criteria based on Kriging surrogate model
- Cong Chen
- , Jiaxin Liu
- & Pingfei Xu
-
Article
| Open AccessSynthetic aircraft RS image modelling based on improved conditional GAN joint embedding network
- Junyu Chen
- , Haiwei Li
- & Jia Liu
-
Article
| Open AccessGrindability of carbon fiber reinforced polymer using CNT biological lubricant
- Teng Gao
- , Yanbin Zhang
- & Shubham Sharma
-
Article
| Open AccessA novel aerial manipulator system compensation control based on ADRC and backstepping
- Le Ma
- , Yiming Yan
- & Jie Liu
-
Article
| Open AccessSurvey on security issues of routing and anomaly detection for space information networks
- Ming Zhuo
- , Leyuan Liu
- & Zhiwen Tian
-
Article
| Open AccessMachining feature recognition based on deep neural networks to support tight integration with 3D CAD systems
- Changmo Yeo
- , Byung Chul Kim
- & Duhwan Mun
-
-
Article
| Open AccessInvestigation of the out-of-plane load-bearing capacity of T1100/5405 composite T-stiffened panels
- Heyuan Huang
- , Xuanjia Zhang
- & Dong Wang
-
Article
| Open AccessMultilayer radiation shield for satellite electronic components protection
- Hamideh Daneshvar
- , Kavoos Ghordoei Milan
- & Armin Mosayebi
-
-
Article
| Open AccessMathematical model for the tensile strength of the crimping assembly of aviation wiring harness end
- Pin Li
- , Gongping Liu
- & Chunlin Tian
-
Article
| Open AccessQuantitative assessment of pilot-endured workloads during helicopter flying emergencies: an analysis of physiological parameters during an autorotation
- José Ricardo Silva Scarpari
- , Mauricio Watanabe Ribeiro
- & Roberto Gil Annes da Silva