Published online 16 May 2010 | Nature | doi:10.1038/news.2010.244


Glass electrode powers smallest pump

Nanodevice could be used to sample or treat single cells.

At the nanoscale, glass conducts electricity without breaking, allowing glass components to power microscopic machines.A. Hunt/ S. Lee

A team of engineers has created the world's smallest pump. The minute device, similar in size to a human red blood cell, is powered by an electrode made from something that doesn't usually conduct electricity — glass.

Applying an electrical current to nanodevices is inherently tricky. Using non-conductive materials makes it even more difficult because they require wires inserted into them, yet they tend to be too small to make the integration of all these moving parts possible.

To solve this problem, Alan Hunt from the University of Michigan in Ann Arbor and his colleagues used a laser to hollow out a bent pipe inside a piece of glass. This resulted in a tiny tunnel with a thin glass wall at one end.

Insulating materials such as glass, wood and plastic can conduct electricity at high voltages, but they usually suffer in the process. "When lightning hits your house, the bolt will pass through your roof, but you end up with a lot of damage," says Hunt.

But a few years ago, his team found that at the nanoscale, ordinary glass becomes conductive without breaking. "When you go down to the nanoscale, the world doesn't behave as we're used to," says Hunt.

If Alice ate a mushroom in Wonderland and shrank to the size of a gnat, says Hunt, the thread in her dress would be about as thick as the conductive glass wall in the electrode.

Miniature laboratories

When filled with an electrically conducting solution, the tiny pipe becomes a liquid 'wire', with the glass wall at its tip acting as an electrode.

The team have used the electrode to transfer power to an assembly of glass channels that forms the smallest pump ever built, four micrometres across and containing three channels that are 0.6 micrometres wide1. The pump can control a flow rate of one-thousandth of one-trillionth of a litre per second.

Control over such minuscule volumes could be useful for taking fluid samples from infected cells, or delivering small drug doses to extremely localized sites. Scientists studying cells interacting in a dish could deliver chemicals to a single cell and see how its neighbours were affected.

Many microfluidic devices are made from glass and other transparent materials, and so are amenable to the new laser technique. Etching electrodes and channels directly into them using the new laser technique could make such devices simpler, says Hsueh-Chia Chang, a specialist in microfluidics at the University of Notre Dame in Indiana. 

  • References

    1. Lee, S., An, R. & Hunt, A. J. Nature Nanotechnol. advanced online publication doi:10.1038/nnano.2010.81 (2010).


If you find something abusive or inappropriate or which does not otherwise comply with our Terms or Community Guidelines, please select the relevant 'Report this comment' link.

Comments on this thread are vetted after posting.

Commenting is now closed.