The genus Barbarea has emerged as a model for evolution and ecology of plant defense compounds, due to its unusual glucosinolate profile and production of saponins, unique to the Brassicaceae. One species, B. vulgaris, includes two ‘types’, G-type and P-type that differ in trichome density, and their glucosinolate and saponin profiles. A key difference is the stereochemistry of hydroxylation of their common phenethylglucosinolate backbone, leading to epimeric glucobarbarins. Here we report a draft genome sequence of the G-type, and re-sequencing of the P-type for comparison. This enables us to identify candidate genes underlying glucosinolate diversity, trichome density, and study the genetics of biochemical variation for glucosinolate and saponins. B. vulgaris is resistant to the diamondback moth, and may be exploited for “dead-end” trap cropping where glucosinolates stimulate oviposition and saponins deter larvae to the extent that they die. The B. vulgaris genome will promote the study of mechanisms in ecological biochemistry to benefit crop resistance breeding.
The crucifer family (Brassicaceae) is a large plant family containing several important cultivated species, such as oilseed rape, mustards and the many cabbages, as well as the general model plant Arabidopsis thaliana. Characteristic for crucifers is their content of glucosinolates, a group of sulfur and nitrogen containing metabolites derived from amino acids. Glucosinolates constitute the major group of defense compounds in the family, with large structural diversity among species and higher taxa1. Glucosinolates are hydrolysed by myrosinases upon tissue damage, releasing diverse but generally toxic compounds depending on the specific glucosinolate structure2, and thereby act as phytoanticipins. Indole phytoalexins are also widespread in the family3. In addition to these general crucifer defense systems, several other classes of chemical defences are known in particular genera, and one of these is the triterpenoid saponins in the genus Barbarea4.
Within the crucifer family, several species and genera are used as model systems for evolution and chemical ecology of plant defense compounds, including Arabidopsis5, Boechera6,7, Brassica (cabbages)8, and Barbarea9,10,11,12. The Barbarea genus is especially interesting as it contains characteristic defense compounds: the saponins, which are unique in the crucifer family9,13,14, a range of rare or unique aromatic glucosinolates2,15, and newly discovered non-indole phytoalexins suggested to be glucosinolate derived16. Glucosinolates of Barbarea species are exclusively derived from phenylalanine and tryptophan. This is in contrast to glucosinolates from other crucifers, such as A. thaliana, Boechera stricta and cabbages, that also include glucosinolates derived from aliphatic amino acids. Triterpenoid saponins are glycosylated triterpenoids with soap-like physical properties, which serve multiple roles in pest and disease resistance14. Triterpenoids are common in crucifers, and it seems that the ability to produce saponins in the Barbarea species evolved by a novel substrate specificity of a newly duplicated UDP-glucosyl transferase17.
One of the species in the Barbarea genus, B. vulgaris R.Br., is additionally interesting because it includes two divergent ’types’ that differ in glucosinolate and saponin profile15,18,19. They also differ in their density of trichomes on rosette leaves; one is almost without trichomes (i.e. “glabrous”) and therefore called G-type, the other has high density of trichomes (“pubescent”) and is called P-type. Both types are diploid (2n = 2x = 16)20, with different, but overlapping, geographic ranges18.
The major G-type and P-type glucosinolates differ in the stereochemistry (either S or R, respectively) of hydroxylation of their common phenethylglucosinolate backbone, leading to epimeric glucobarbarins (Supplementary Fig. 1)2. Additional hydroxylation in the P-type leads to other P-type specific glucosinolates and hydrolysis products2. The biosynthetic pathway of glucobarbarins was recently proposed21. In general the P-type deviates markedly from the G-type and other investigated Barbarea species19, and is for this reason regarded as an ‘innovative’ evolutionary lineage with respect to specialized metabolites, including a number of rare and even unique glucosinolates and saponins10,15,17.
The five known saponins produced by the G-type of B. vulgaris, and the other Barbarea species tested so far, consists mainly of a mixture of different β-amyrin-derived saponins10,17. Notable among these are hederagenin cellobioside and oleanolic acid cellobioside. Especially the former is highly deterrent to some specialist lepidopteran herbivores, including the diamondback moth (Plutella xylostella), to the extent that the larvae will eventually die if no alternative host plant is available4,22. In contrast, P-type plants seem to produce mainly lupeol-derived saponins17, which are not known as deterrent or toxic to these specialist herbivores.
We previously detected QTLs for the biochemical differences between the G- and P-type in a population of F2 hybrids10. QTLs were detected for both G-type glucobarbarin (S-configuration) and P-type epi-glucobarbarin (R-configuration) on different linkage groups, clearly showing that different genes are involved. This is supported by recent transcriptomics analyses suggesting two related but quite diverged genes are responsible for the hydroxylations21. QTLs for G-type saponins have also been identified, together with genes involved in their biosynthesis17. However, to find additional genes and detect the evolutionary and functional changes that have diversified the plants and their defense metabolites, a genome of B. vulgaris was much wanted.
Here we report a draft genome sequence of the B. vulgaris G-type, and re-sequencing of the P-type. On the basis of a 168-Mb assembly we identify 25,350 protein coding genes, of which 81% are anchored to eight pseudomolecules. Comparative genomic analysis between the G- and P-types allow us to determine genetic differences between them, and using genetic analysis we propose candidate genes underlying their difference in trichome density and glucosinolates. The B. vulgaris genome will lead to a better understanding of the production of specialised metabolites conferring disease and insect resistance in general, and of evolutionary events leading to the loss of a particular insect resistance and changed glucosinolate profile and trichome density in the biochemically innovative P-type.
Genome sequencing and assembly
We selected one outbred G-type individual for whole genome sequencing, from which we generated a total of 17.9 Gb of sequence data on the Illumina GAII system of two fragment libraries with different insert sizes. This represented approximately a 66.5 X coverage of the B. vulgaris genome, with an estimated size of 270 Mb based on k-mer spectrum analysis. These data were supplemented with a long jump distance library of 14.4 Kb in size, and 5.2 Gb of PacBio data (Supplementary Table 1). De novo assembly (Supplementary Fig. 2) of these sequences generated a draft genome assembly of 167.7 Mb, representing 62.1% of the estimated genome size (Table 1), when only taking contigs greater than 1000 bp into consideration. The remaining ~38% is likely consisting of repetitive regions that cannot be resolved using short read shotgun assembly. The assembly consists of 16,938 contigs and 7,874 scaffolds with N50 sizes of 14.3 Kb for contigs and 56.3 Kb for scaffolds (Table 1). Despite the smaller assembly size relative to the estimated genome size, the assembly provides a good representation of the gene space. This is demonstrated by the fact that 97% of 41,018 de-novo assembled transcripts from an RNAseq study11 had a valid alignment (Supplementary Table 2) in our assembly. Furthermore, we used a Core Eukaryotic Genes Mapping Approach (CEGMA)23 to evaluate the assembly for completeness, and it showed that 96% of core eukaryotic genes were present as complete hits and 98% were present as partial hits (Supplementary Table 3).
To determine scaffold placement on pseudomolecules we first attempted to anchor scaffolds by creating a high density genetic map of an F2 population derived from the selfing of an F1 plant from a cross between a heterozygous G-type and a P-type plant. Each F2 individual was genotyped by a genotype-by-sequencing (GBS) approach24 and we constructed a linkage map comprised of 796 markers spread across eight linkage groups (Supplementary Table 4 and Supplementary Fig. 3), which is in agreement with the chromosome number determined by cytogenetic analysis20. Using this map we could place 431 scaffolds into eight pseudomolecules, which had a total length of 38.7 Mb (23% of the assembly).
In a second strategy we used comparative analysis with the closely related genome of Arabidopsis lyrata25, to order and orientate the B. vulgaris scaffolds based on gene pairs in conserved synteny. The macro- and micro-synteny between B. vulgaris and A. lyrata has been evaluated (see material and methods), and there was good co-linearity between linkage groups and A. lyrata chromosomes, albeit with some re-arrangements within linkage groups. The B. vulgaris genetic map took precedence over synteny when ordering. The top of linkage group two had a segment (0–69.7 cM) that was linked to a segment of A. lyrata chromosome 6. A final pseudomolecule assembly was generated by integrating the anchoring information from the genetic map with that of the comparative map with A. lyrata. In total 122.1 Mb (72.8%) of the assembly was anchored to eight pseudomolecules, and 89.2 Mb (53.2%) was orientated.
Gene prediction and functional annotation
We identified 25,350 protein-coding loci in the B. vulgaris genome using de novo and homology based gene predictions with the MAKER226 pipeline. We assembled de-novo an available RNAseq data set11, and also used an A. thaliana protein set27 as evidence. Genes were found on 4,527 scaffolds with an average of 5.6 genes per scaffold. Using the GBS map, 7,525 genes (29.7%) were directly anchored to the genetic map, and 20,538 genes (81%) were anchored in the final assembly consisting of eight pseudomolecules. The average number of exons per gene was 6.1, and the average protein length was 415.7 amino acids (Supplementary Fig. 4), in agreement with metrics from A. thaliana27. Genes were assigned functional annotation using blastp searches (Supplementary Data 1). Of 25,350 predicted proteins, 20,006 (79%) had a blastp hit in the UniProt Viridiplantae sequences with an E-05 cut off. Furthermore, 24,826 (98%) predicted proteins had at least one predicted Pfam domain, 2,394 (9%) contained predicted signal peptides, and 5,301 (21%) transmembrane helices.
The 25,350 proteins of B. vulgaris were compared against proteins from A. thaliana27, A. lyrata25, C. rubella28, and Brassica rapa29 using the software OrthoMCL30. This revealed that 13,678 orthologous groups were shared among all five species, and only 162 were unique to B. vulgaris (Supplementary Fig. 5).
Genetic diversity between Barbarea vulgaris chemotypes
To improve our understanding of genetic differences between the G- and P-type, we re-sequenced the P-type to complement the de novo G-type assembly. We identified 0.87 million and 1.26 million heterozygous variants in the G- and P-type plant, respectively, and 1.43 million variants that were homozygous for a different allele between G- and P-type individuals. The number of genes with heterozygous variants was 15,610 (62%) and 20,246 (80%) in G-type and P-type, respectively. The number of protein coding genes with fixed differences between the G-type and P-type was 22,555 (89%), and on average there were 29.6 fixed differences per gene. Fixed differences were well distributed along all eight pseudomolecules (Supplementary Fig. 6). Of the 1.43 million fixed differences, 79% were SNPs, 10% were insertions, and 11% were deletions, and these were well distributed across genomic features (Supplementary Fig. 7). A relatively large proportion of variants (9,266) were assigned to effect types considered to have a disruptive impact on a protein (Supplementary Fig. 8), making them candidate loci to explain phenotypic differences between plant types. These were distributed across 5,213 sequences associated with GO terms for metabolic processes, such as cellular aromatic compound metabolic process, cellular nitrogen compound metabolic process, and organic cyclic metabolic process (Supplementary Fig. 9). Considering the variation in saponins and glucosinolates between the G- and P-types, we searched for cytochromes P450 within the list of genes with fixed differences between the G- and P-types, and identified 42 sequences (Supplementary Data 2) with fixed differences likely to have a disruptive impact on protein function.
GL1 is a candidate locus differentiating trichome density
The trichomes found in B. vulgaris are simple and non-glandular19, and the two B. vulgaris genotypes are morphologically distinguished by and named from the scarcity of trichomes on rosette leaves in the G-type and abundance in the P-type (Fig. 1A). For this reason, it was an obvious first endeavor to use the genome for locating a candidate gene for this difference. Previous analysis of the F2 population described above identified two QTLs for pubescence; however, confidence intervals for these QTLs were large10. We used the newly developed GBS map to re-analyse the data on pubescence, and identified a QTL with large effect on linkage group eight, with a peak at 143.5 cM (Fig. 1B) and a 95% Bayesian confidence interval of 3.9 cM. Another QTL with smaller effect was identified on linkage group four, and taken together the two QTL model accounts for 34.1% of the phenotypic variance for trichome density (Supplementary Table 5). The QTL peak on linkage group eight is in a region with homology to a segment of A. thaliana chromosome three (Fig. 1C). A QTL for trichome density has already been identified in this region in an A. thaliana experimental mapping population31. The protein underlying this QTL is GL1 (AT3G27920), a MYB like transcription factor involved in activation of the developmental pathway for trichome differentiation32. Furthermore, GL1 has recently been shown to have qualitative and likely quantitative effects on trichome density in natural populations of A. thaliana33. GL1 is one of three proteins in the A. thaliana R2R3-MYB subgroup 15, together with MYB23 and WER34. We used GL1 as a query to search both A. thaliana and B. vulgaris proteins for similar sequences, and generated a phylogenetic tree. Not surprisingly, the three A. thaliana proteins GL1, MYB23, and WER were present in a sub-clade, together with three B. vulgaris proteins (Fig. 1D). MYB23 is functionally equivalent to GL1 with respect to trichome initiation but not branching. Two genes were located on scaffolds anchored to pseudomolecules 5 and 7, while the third gene (maker-Contig7580-snap-gene-0.0-mRNA1) was on an unanchored scaffold. This gene shares the greatest amino acid identity (gapped alignment) to GL1 (57.6%, Supplementary Fig. 10), and considering the other two genes are anchored outside the QTL region, is the most likely B. vulgaris ortholog to GL1. Our results suggest that an ortholog of GL1 is a likely candidate gene explaining variation in trichome density between the glabrous (G) and pubescent (P) types of B. vulgaris.
Genetic basis of contrasts to the Arabidopsis glucosinolate profile
A major contrast between glucosinolates in A. thaliana and the genus Barbarea is the apparent lack of methionine derived glucosinolates in Barbarea15,19. Comparison with close relatives of Barbarea35 suggests the lack of methionine derived glucosinolates is due to recent evolutionary loss. The entry of (chain elongated) methionine to glucosinolate biosynthesis in A. thaliana is controlled by the paralogous CYP79F1 and CYP79F2, while the genetic and enzymatic basis of the corresponding step for phenethylglucosinolate in A. thaliana is completely unknown36. We found only one B. vulgaris protein in an orthologous group with CYP79F1 and CYP79F2 (Fig. 2, alignments in Supplementary Fig. 11); the gene encodes an enzyme that is 82% identical to CYP79F1 and has been named CYP79F6 by the P450 nomenclature committee21. The gene is highly expressed and induced by diamondback moth infestation as expected for a gene responsible for biosynthesis of phenethylglucosinolate and derivatives such as glucobarbarins21. If CYP79F6 is responsible for the committed biosynthetic step to phenethylglucosinolate and glucobarbarins21, the apparent lack of methionine derived glucosinolates would seem to be due to a changed substrate specificity37 of CYP79F6. Our genome-wide search for homologues extends the previous transcriptome analysis of leaves21, and thereby supports the apparent key role of CYP79F6 in creating the difference between the Barbarea and A. thaliana glucosinolate profiles.
Glucosinolate backbone biosynthesis proteins
We complemented the list of putative glucosinolate biosynthesis genes, known from the transcriptome21, by a genome-wide search. In A. thaliana, conversion of precursor amino acids to aldoximes by CYP79F genes are followed by oxidization to activated compounds by CYP83A1 in the aliphatic pathway. We identified putative orthologs to both CYP83A1, and CYP83B1 from the aliphatic, phenethyl and indole glucosinolate pathways (Fig. 2, alignments in Supplementary Fig. 12). We also identified a putative ortholog of GSTF11 (BARB|mc650-snap-G-0.53-mRNA-1) and SUR1 (BARB|mc404-snap-G-0.41-mRNA-1, Supplementary Fig. 9), which are involved in converting activated aldoximes to S-alkyl-thiohydroximates, and the subsequent conversion to thiohydroximates by SUR1. UGT74C1 is proposed to glucosylate methionine derived thiohydroximates to form aliphatic desulfoglucosinolates, and while we identified a putative ortholog of UGT74B1, which acts on the aromatic thiohydroximates, we did not identify an ortholog of UGT74C1 (Supplementary Fig. 13). The next step is the sulfation by sulfotransferases to form glucosinolates. SOT17 and SOT18 preferentially sulfate aliphatic substrates, and SOT16 Phe- and Trp- derived substrates. We identified putative orthologs to all three sulfotransferases (Supplementary Fig. 14), along with some closely related sulfotransferases that were only identified in C. rubella, B. rapa, and B. vulgaris.
Aliphatic glucosinolate side chain decoration genes
Among the last steps of the biosynthesis of methionine derived glucosinolates in A. thaliana is the oxidation of methylthioalkyl glucosinolates to methylsulfinylalkyls by FMO-GSOX enzymes36. The finding of apparently two functional FMO-GSOX genes in B. vulgaris was initially surprising, since the standard substrates and products (methylthioalkyl and methylsulfinylalkyl glucosinolates) are apparently absent in the species15. There are five FMO-GSOX genes in A. thaliana, numbered 1–5, of which numbers 1–4 are biochemically similar and number 5 is slightly different in terms of substrate specificity38. Methylthioalkyl and methylsulfinylalkyl glucosinolates are known from close relatives of Barbarea35, and the common ancestor is expected to have had the FMO-GSOX gene. Phylogenetic analysis of genes clustering within an orthologus group containing FMO-GSOX proteins identified a sub-clade containing FMO-GSOX 1–4 from A. thaliana and a single protein from B. vulgaris (Fig. 3, alignments in Supplementary Fig. 15). Loss of FMO-GSOX genes fits expectations since B. vulgaris apparently lacks methionine derived glucosinolates.
An explanation for the continued existence of some FMO-GSOX genes in B. vulgaris could be that their biochemical function has changed. Indeed, apparently unique phytoalexins with either a methylthio group or a methylsulfinyl group were recently reported from B. vulgaris16 (Supplementary Fig. 1), and the identified FMO-GSOX genes may be involved in phytoalexin biosynthesis (Fig. 3). Comparing the four FMO-GSOX proteins with relevant sequences from other cruciferous species, we noticed two of the B. vulgaris proteins were placed in clades with one or more functionally characterized A. thaliana proteins involved in oxidation of thiomethyl groups in glucosinolates. However, the other two B. vulgaris “FMO-GSOX” proteins were placed in different clades, with A. thaliana proteins involved in oxidation-reduction. Apparently the four identified B. vulgaris genes represent considerable diversity, making them particularly interesting to investigate in a plant lacking the classical aliphatic glucosinolate substrates of these genes. Secondary modifications of aliphatic glucosinolates can also be achieved by AOP2 and AOP3, however, we didn’t identify any putative orthologs of AOP within the B. vulgaris assembly. Additional modifications are achieved by GS-OH, which is involved in hydroxylation, and B. vulgaris shows variation in hydroxylation between P- and G-types as described below.
Genetic loci controlling glucosinolate side chain hydroxylation
The G- and P-type glucosinolate profiles differ in the stereochemistry of 2-hydroxylation15. The resulting glucobarbarins have been indirectly linked to ‘dead-end’ resistance to the diamondback moth9,39, and to resistance to the cabbage moth12 and phytoalexin biosynthesis16. QTLs for variation in glucobarbarin ((2 S)-2-hydroxy-2-phenylethylglucosinolate) and epiglucobarbarin ((2 R)-2-hydroxy-2-phenylethylglucosinolate) were previously identified10, however, re-analysis with the GBS map has enabled the QTL be more precisely located. One QTL for glucobarbarin was identified on linkage group three accounting for 39.3% of the phenotypic variation, and one QTL for epiglucobarbarin was identified on linkage group four accounting for 53.1% of the phenotypic variation (Fig. 4, Supplementary Tables 6 and 7).
The 2-hydroxylation needed to form glucobarbarin from phenethylglucosinolate in Barbarea has a counterpart in A. thaliana, controlled by the GS-OH locus. It has already been shown in A. thaliana that the GS-OH locus is encoded by a 2-oxoacid-dependent dioxygenase (AT2G25450) that is required for the production of 2-hydroxybut-3-enylglucosinolate40. This results from oxidation of 3-butenylglucosinolate to generate either (2 S)-2-hydroxy-3-butenylglucosinolate (progoitrin) or the 2-epimer (epiprogoitrin). Using the A. thaliana GS-OH protein as a query we searched protein sets from A. thaliana27, A. lyrata25, C. rubella28, B. rapa29, and B. vulgaris, with minimum of 80% coverage and 50% identity. Phylogenetic analysis of the resulting proteins identified four sub-clades (Fig. 5), with one sub-clade containing AT2G25450 and two other A. thaliana proteins, one A. lyrata protein, three B. rapa proteins, and three B. vulgaris G-type proteins (Fig. 5). The three B. vulgaris proteins were provisionally named BvGS-OH-like 1 (BARB|mc2865-snap-G-0.4-mRNA-1), BvGS-OH-like 2 (BARB|mc5444-snap-G-0.2-mRNA-1), and BvGS-OH-like 3 (BARB|mc422-snap-G-0.43-mRNA-1).
Interestingly, BvGS-OH-like 3 is found proximal to the QTL for glucobarbarin on linkage group 3 where the G-type allele is responsible for higher production of glucobarbarin, but the expression of BvGS-OH-like 3 was low in both G- and P-types (Fig. 4). Three other glucosinolate-relevant genes were found nearby (Fig. 4), but their involvement in hydroxylation was excluded for biochemical reasons. BvGS-OH-like 1 and 2 were present on a sub-clade with the A. thaliana protein encoding the GS-OH locus. These corresponded to two sequences, referred to as RHO and SHO, proposed to underlie variation in epiglucobarbarin and glucobarbarin between P- and G-types in a recent transcriptome study21,41. SHO and RHO were identified as sequence homologs to GS-OH in the G- and P-type transcriptomes respectively, and showed low amino acid identity (68%) with each other21. It was thus proposed that they were two independent genes that diverged during separation of G- and P-types21. However, using the genome we were able to identify genes (BARB|mc2865-snap-G-0.4-mRNA-1 and BARB|mc5444-snap-G-0.2-mRNA-1) that each had high sequence similarity (over 98%) to both BvGS-OH-like 1 (SHO) and BvGS-OH-like 2 (RHO) in the G-type assembly. Using the RNA-seq data it is obvious that the genes are expressed highly in either G- or P-type (Fig. 5) as previously observed for SHO and RHO21. In the case of BvGS-OH-like 1 (SHO) we do not find a homologous sequence in the P-type, based on both mapping P-type reads to the reference G-type assembly, and sequence searches of a de-novo P-type assembly. This gene may have been lost from the P-type during separation of the plant types, which is supported by the absence of any detectable expression of this gene in P-type (Fig. 5). The scaffold with this gene from G-type was not directly anchored within the pseudomolecule assembly. However, we identified A. thaliana orthologs to other genes on this scaffold and used genes up and downstream in the genome to fish for B. vulgaris orthologs that had been anchored. Assuming synteny within this region, the likely location of this scaffold is between 5.9 and 6.9 Mb on chromosome three, placing it close to the QTL for glucobarbarin (Fig. 4). This evidence suggests that the very reduced levels of glucobarbarin in the P-type, compared to the G-type, could be due to loss of the BvGS-OH-like 1 (SHO) gene. Conversely, the high levels of glucobarbarin in the G-type could be due to very high expression of BvGS-OH-like 1 in G-type leaves.
The G-type allele of BvGS-OH-like 2 shared more than 98% identity with the RHO transcript identified in the P-type transcriptome by Liu et al.21. Although the gene is present in both types its expression is very different, with transcript accumulation only detected in the P-type plant (Fig. 5). When we inspect the sequence variation for this gene in both types, we see that the gene is completely homozygous in the G-type and appears highly heterozygous in the P-type (Fig. 5), however, read depth analysis suggests this gene is duplicated in the P-type plant (Fig. 5). BvGS-OH-like 2 was located on an unanchored 11.37 Kb scaffold, and we found no sequence homologous to this scaffold in the A. thaliana genome. Of the three genes predicted within this scaffold, only BARB|mc5444-snap-G-0.2-mRNA-1 (RHO) had a significant match to a A. thaliana gene. This was GS-OH, although we know from the phylogenetic analysis that the GS-OH protein is more likely to be orthologous to BARB|mc2865-snap-G-0.4-mRNA-1 (SHO) (Fig. 5). Based on this, it appears that there are no sequences that are homologous to this region in A. thaliana. We went back to the GBS marker data, before applying filters based on segregation distortion and missing rate, in order to identify a marker located within this scaffold. We identified one marker with data missing for 40/111 individuals, and displaying segregation distortion (chi-squared equal to 17.28). However, when including this marker in linkage mapping it grouped with linkage group four and had maximum linkages with two makers just downstream of the QTL location for epiglucobarbarin on linkage group 4 (Supplementary Fig. 16). This QTL accounts for 53.1% of the phenotypic variation for epiglucobarbarin (Supplementary Table 7), and the evidence suggests that a BvGS-OH-like 2 (RHO) allele in the P-type plant is responsible for its accumulation.
Insect resistance and saponins
QTLs for insect resistance have previously been identified and found to co-locate with QTLs for saponin content, and the OSCs (oxidosqualene cyclase) LUP2 and LUP5 genes10,17. In that study, the two QTLs were placed on separate linkage groups; however, in the improved analysis presented here they are located on a single linkage group (Supplementary Fig. 17). LUP5 could be directly found in the assembly, and LUP2 was anchored to the genetic map using a previously designed molecular marker. The QTL with the largest effect on resistance was located on linkage group 4 proximal to LUP5, and a QTL with smaller effect was also located on linkage group 4 proximal to LUP2 (Supplementary Fig. 17). The resistance QTL proximal to LUP5 co-located with QTL that have a large effect on the content of four known G-type saponins: hederagenin cellobioside, oleanolic acid cellobioside, gypsogenin cellobioside, and 4-epihederagenin cellobioside. These saponins have been shown to accumulate upon insect and pathogen attack42.
Our genotyping by sequencing (GBS) analyses greatly improved the previously published genetic map of B. vulgaris, and narrowed the genomic regions containing QTLs for insect resistance and saponins. As previously shown, our current analysis supports that the triterpenoid and glucosinolate pathways are unlinked, as the genes are not clusterered as has been shown with other pathways for plant specialized metatbolites43. Key enzymes involved in the biosynthesis of saponins in B. vulgaris were recently identified17, however the key gene involved in catalysing the C23 hydroxylation to hederagenin, the important insecticidal saponin, remains a mystery. Our present genome sequence and improved genetic map will stimulate future research into the tritepenoid pathway to fully elucidate the genes involved in biosynthesis of saponins and how they have evolved.
We have sequenced the genome of B. vulgaris using a combination of Illumina paired-end sequencing data and PacBio long reads. The resulting assembly is 167.8-Mb and covers 62.1% of the estimated genome size; however, it is estimated to provide a near full coverage of the gene space. The assembly consists of 25,350 protein coding genes, and we have used a combination of genetic linkage mapping and synteny with A. lyrata to anchor 72.8% of the assembly to eight pseudomolecules. The availability of the B. vulgaris genome provides a valuable genomic resource to study the production of rare or unique metabolites with ecological effects. As the first species to be sequenced within the genus Barbarea, it also adds a valuable resource for comparative genomics and evolutionary analysis within the crucifer family.
Two divergent types of B. vulgaris, G and P, can be distinguished based on the presence or absence of simple trichomes19. Trichomes have no known ecological effect in this species, but well known effects in other plants44. Loci controlling trichome density were previously mapped, but the genes underlying them have not been identified. Here, we developed a high density genetic linkage map and were able to more precisely map a major locus affecting trichome density to a small region on linkage group eight. The QTL region was syntenic with a region in A. thaliana containing the GL1 locus, which is required for induction of trichome development32. In A. thaliana, the GL1 locus is an important source of natural variation in trichome density33. Our results suggest that an ortholog of GL1 is a likely candidate gene to explain much of the variation in trichome density that we observe between the glabrous and pubescent types of B. vulgaris.
Apart from trichome density, the two chemotypes differ in the types and relative abundances of glucosinolates they produce. While the parent glucosinolates are the same, tryptophan derived indol-3-ylmethylglucosinolate and homophenylalanine derived phenethylglucosinolate, the substitution patterns differ in multiple ways, with known or expected effects in the bioactive down-stream hydrolysis products1,15. As these interesting structures have not been identified in A. thaliana and crop plants, they are candidates for new resistance properties2,10,16,21. With the availability of genomic data, the two types of B. vulgaris provide an excellent model system for identifying the underlying genetics and biochemistry and exploring ecological effects. The gene classes selected here, potentially involved in stereospecific glucosinolate hydroxylation as well as phytoalexin biosynthesis, serve as examples of the biochemistries that can be explored in this model system.
The biosynthesis of glucobarbarin and epiglucobarbarin is hypothesised to result from hydroxylation of the common precursor 2-phenylethylglucosinolate10. Their relative abundancies vary in different tissues2,19, but usually glucobarbarin is most abundant in the G-type and epiglucobarbarin in the P-type15. Three genes were discovered, provisionally numbered 1, 2 and 3, that could be potentially involved in this difference, all sequence homologs of GS-OH in A. thaliana. Two of these, alternatively named RHO and SHO15,21, show extremely high expression in leaves. We propose that BvGS-OH-like 2 (RHO) controls epiglucobarbarin production. In the analysed G-type plant, the gene is completely homozygous and does not appear to be transcribed to detectable levels. In contrast, the gene appears to be duplicated in the P-type plant and is transcribed to a very high level. We propose that BvGS-OH-like 1 (SHO) is involved in glucobarbarin production in the G-type, but appears to be lost from the P-type; this is supported by the transcriptome data of Liu et al.21. Our discovery of BvGS-OH-like 2 (RHO) also in the G-type, and of a third homolog, BvGS-OH-like 3 in both types, paves to way for studies of the evolution of glucosinolate decoration in the genus, leading to the aberrant P-type profile. Future studies should focus on biochemical and sequence variation in already established panels of diverse B. vulgaris genotypes12,15 to correlate sequence variation and glucosinolate decoration, and test the proposed roles of these genes in glucosinolate decoration with functional approaches such as those descibed in Khakimov et al., (2015)45.
The B. vulgaris draft genome sequence will be an important resource for studying defense compounds such as saponins, glucosinolates and phytoalexins. We augmented the G-type sequence by resequencing the P-type, which produces different structures of these defense compound classes with different bioactivities. A greater understanding of genes involved in the biosynthesis of novel glucosinolates, phytoalexins and saponins may enable breeding of crops with enhanced defenses against diseases and herbivorous pests.
Material and Methods
DNA preparation and whole genome shotgun sequencing
High quality genomic DNA was isolated from leaves of a G-type B. vulgaris individual using Qiagen kits (DNeasy Plant kit and Genomic-tip). Illumina paired-end (PE) libraries with mean fragment lengths of 130 and 500 bp were prepared from genomic DNA and sequenced. Long Jump Distance (LJD) libraries with average insert sizes of 17 Kb were prepared for the G-type and sequenced on an Illumina HiSeq 2000 by Eurofins Genomics (Ebersberg, Germany). For PacBio sequencing DNA from the G-type were prepared for sequencing (C2 chemistry), which was carried out at the Genome Sequencing and Analysis Core Resource at Duke University, NC, USA. The sequencing effort for each library varied (Supplementary Table 1).
Genome assembly and annotation
The G-type was assembled as follows (Supplementary Fig. 2): the insert size of the short fragment library was less than twice the read length, therefore the reads were error-corrected and the pairs merged using the stand alone error-correcting (and fragment filling) algorithm in ALLPATHS-LG46. The Illumina data from fragment libraries (merged reads and 500 bp PE libraries) were assembled using Celera Assembler47 and scaffolding using the PacBio data was performed with SSPACE-LONG48. Long range information provided by Long Jump Distance (LJD) libraries (Eurofins, Germany), were used for scaffolding with SSPACE49. We then attempted to fill gaps in the assembly using the PacBio reads with PBJelly50. Annotation was performed with the MAKER2 annotation pipeline26, using B. vulgaris transcript data and A. thaliana proteins27 as initial evidence. The transcript evidence was generated by performing a de-novo assembly of publicly available RNA-seq data from a G-type B. vulgaris genotype11 using Trinity51. Genes were initially predicted directly from evidence, and a training file for SNAP52 was created. Ab-initio predictions were then generated by SNAP, and an updated training file developed. A further four iterations of gene prediction followed by an updating of the training file were completed. Genes were assigned functional annotation using Blastp searches against a database containing all UniProt Viridiplantae sequences (retrieved 08-02-2015) and the top hit was recorded (Supplementary Data 1). HMMER v.2.353, SIGNALP v.4.154, and TMHMM v.2.055 were further employed to identify specific protein domains, signal peptides, and transmembrane helices.
Evaluation of genome completeness (gene content)
We used CEGMA23 to evaluate the completeness of the assembly based on the conservation of 248 core eukaryotic genes. We also aligned the de-novo assembled B. vulgaris transcripts (41, 018) described above to the assembly using BLAT56. The results were parsed57 to identity the number of transcripts with a match in the assembly, the base coverage, and how the proportion of transcripts split across multiple scaffolds.
Genotyping F2 population and genetic linkage mapping
We used an existing F2 mapping population that had previously been developed in our group by selfing an F1 plant from a cross between a G-type and P-type plant. B. vulgaris is highly outcrossing and the parental plants therefore are not fully homozygous. As the segregating F2 population was derived from a single F1 plant, all co-dominant markers are therefore expected to segregate 1:2:1. We genotyped the parents, F1 hybrid and 111 individuals of the F2 population. Genotyping was performed using a genotyping-by-sequencing protocol as described by Elshire et al.24. DNA was quantified using the Quant-iT Assay (Life Technologies), and 100ng of DNA was digested with PstI and ligated to modified Illumina adaptors containing the restriction site overhang and a unique bar-code sequence of between four and nine nucleotides. Two libraries were prepared and each was sequenced on four lanes of an Illumina HiSeq2000. This was done to reduce the amount of missing data and increase read-depth to improve our ability to call heterozygotes. Adaptor contamination was removed using Scythe (https://github.com/vsbuffalo/scythe) with a prior contamination rate set to 0.40. Sickle (https://github.com/najoshi/sickle) was used to trim reads when the average quality score in a sliding window (of 20 bp) fell below a phred score of 20. At this point reads shorter than 40 bp were also discarded. The reads were demultiplexed using sabre (https://github.com/najoshi/sabre), and all reads originating from the same sample were combined. Reads were aligned to the draft B. vulgaris assembly using BWA58, and the Genome Analysis Tool Kit (GATK)59 was used to generate a list of putative SNPs. We filtered out positions with a mapping quality below a phred score of 30, and only called genotypes with a genotype-quality-phred score of at least 30. Genotype calls with a phred score below 30 were assigned as missing values. We then filtered out all sites that were not heterozygous in the F1, and sites that had more than 50% of individuals with missing genotype calls. Any positions that were not heterozygous in the F1 were removed from further analysis. Genotypes homozygous for the reference allele (G-type genome) were identified as coming from the G-type parent, and genotypes homozygous for the variant allele were identified as coming from the P-type parent. Over 62% of markers heterozygous in the F1 were homozygous in both of the parents, and over 80% were homozygous in one parent. Genetic linkage mapping was carried out using JoinMap 4.160,61. Severely distorted or monomorphic markers were removed before grouping into linkage groups with a minimum LOD score of 10. We identified suspect linkages when the recombination fraction was larger than 0.5. Mapping within each linkage group was achieved using the regression mapping algorithm. (Supplementary Fig. 2). This map was used to anchor the genome assembly. A subset of 355 markers well distributed across eight linkage groups were selected and used to generate a less redundant genetic map for QTL mapping (Supplementary Fig. 18). R/QTL was used to generate a plot of recombination fraction and LOD score along each linkage group (Supplementary Fig. 19). With this plot we can identify regions where we may have incorrectly encoded the parental alleles. The plot looks as expected, in that we see low-recombination fractions and high LOD scores along the diagonal.
Comparative gene analysis
OrthoMCL30 was carried out to identify orthologous groups of genes using proteins from A. thaliana27, A. lyrata25, C. rubella28, B. rapa29, and B. vulgaris. All-vs-all BLASTP with a cut-off value of 10e-05 was used to identify putative orthologs based on reciprocal best similarity pairs. The MCL algorithm is then applied to a similarity matrix with an inflation value (-I) of 1.5. This results in groups with orthologous genes across species, and “recent” paralogs within species. Phylogenetic trees were generated in MEGA662 using the Maximum Likelihood method based on the JJT matrix-based model63. All positions containing gaps and missing data were eliminated, and trees were drawn to scale, with branch lengths measured in the number of substitutions per site.
We anchored the genome into eight pseudomolecules with the aid of the genetic linkage map and synteny with the A. lyrata genome25. Markers on the genetic linkage map are already linked to genomic scaffolds as a consequence of using the draft sequence as a reference for SNP discovery. In order to take advantage of synteny with A. lyrata we identified gene pairs between B. vulgaris gene predictions and those from A. lyrata. To do this we only selected 1:1 orthologs from an OrthoMCL analysis between proteins from the two species. We identified gene pairs that we were able to use for anchoring. The final pseudomolecule assembly was generated from the genetic map and synteny evidence using ALLMAPS64, where higher weighting was given to evidence from the genetic map. The macrosynteny between B. vulgaris and A. lyrata was compared by anchoring the genetic markers to the A. lyrata genome using gene-pairs identified with the OrthoMCL analysis (linking a gene in a mapped contig with the physical position of its putative ortholog in A. lyrata). Comparisons for each linkage group are shown in Supplementary Figs 20–27. Images were generated using AutoGRAPH65. We also evaluated the microsynteny between B. vulgaris and A. lyrata using SimpleSynteny66 for several B. vulgaris contigs (Supplementary Figs 28–30). B. vulgaris contigs with sequence homology to A. lyrata chromosome 1 were selected and genes within these were used in BLAST searches against the complete sequence of A. lyrata chromosome 1 using a minimum evalue of 0.0001 and a minimum coverage cutoff of 40%. Annotations were lifted from the scaffolds onto the pseudomolecule assembly and can be visualized at http://plen.ku.dk/Barbarea.
QTL analysis for the traits analysed here was previously carried out in this population using a linkage map developed on a limited set of SSR markers, and dominant AFLP markers10. We used the less redundant genetic map (355 markers) for QTL analysis in R/QTL67,68 together with phenotype data for glucosinolates, hairs, and resistance already available10. A LOD threshold was calculated for each trait with 1000 permutations, and served as the threshold above which QTL were identified using the scanone function. This was used as a starting model for multiple-QTL modeling. An initial QTL object was created with the function makeqtl, followed by refinement with refineqtl. The QTL object was fitted with fitqtl, and we searched for evidence of additional QTL with addqtl. In the case of evidence for an additional QTL, a new QTL model was built and the process repeated. All calculations and plots were generated within the R environment69.
Re-sequencing of a B. vulgaris P-type plant and variant analysis
High quality genomic DNA was isolated from leaves of a P-type B. vulgaris individual using a DNeasy Plant Kit (Qiagen). An Illumina paired-end (PE) library with a mean fragment length of 316 bp was prepared from genomic DNA and sequenced on an Illumina HiSeq2000 as paired end libraries with a 100 cycles. Reads were aligned to the draft G-type reference genome using BWA58, and duplicates marked using Picard Tools (http://broadinstitute.github.io/picard). The Genome Analysis Tool Kit (GATK) was used to generate a list of putative INDELS and perform re-alignments around these regions, and call putative INDELS and SNPs59. In addition to aligning P-type reads we also aligned reads from the G-type. We called genotypes when the genotype quality score was at least 30 (Phred scale), and filtered for positions that were heterozygous in either P or G-type genomes, or represented fixed differences between both types. Variant annotation was performed with SNPeff70, making use of the genome annotation to predict SNP effect types.
This Whole Genome Shotgun project has been deposited at DDBJ/ENA/GenBank under the accession LXTM00000000. The version described in this paper is version LXTM01000000. Sequence variation between G- and P-type plants, and annotations, are available as tracks in the Barbarea vulgaris Genome Database, http://plen.ku.dk/Barbarea. Data referenced in this study are available in NCBI with the accession codes SRR158249211 and SRR158363041.
How to cite this article: Byrne, S. L. et al. The genome sequence of Barbarea vulgaris facilitates the study of ecological biochemistry. Sci. Rep. 7, 40728; doi: 10.1038/srep40728 (2017).
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Agerbirk, N. & Olsen, C. E. Glucosinolate structures in evolution. Phytochemistry 77, 16–45, doi: 10.1016/j.phytochem.2012.02.005 (2012).
Agerbirk, N. & Olsen, C. E. Glucosinolate hydrolysis products in the crucifer Barbarea vulgaris include a thiazolidine-2-one from a specific phenolic isomer as well as oxazolidine-2-thiones. Phytochemistry 115, 143–151, doi: 10.1016/j.phytochem.2014.11.002 (2015).
Pedras, M. S. C., Yaya, E. E. & Glawischnig, E. The phytoalexins from cultivated and wild crucifers: Chemistry and biology. Nat Prod Rep 28, 1381–1405, doi: 10.1039/c1np00020a (2011).
Shinoda, T. et al. Identification of a triterpenoid saponin from a crucifer, Barbarea vulgaris, as a feeding deterrent to the diamondback moth, Plutella xylostella. J Chem Ecol 28, 587–599, doi: Unsp 0098-0331/02/0300-0587/0 Doi 10.1023/A:1014500330510 (2002).
Windsor, A. J. et al. Geographic and evolutionary diversification of glucosinolates among near relatives of Arabidopsis thaliana (Brassicaceae). Phytochemistry 66, 1321–1333, doi: 10.1016/j.phytochem.2005.04.016 (2005).
Schranz, M. E., Windsor, A. J., Song, B., Lawton-Rauh, A. & Mitchell-Olds, T. Comparative genetic mapping in Boechera stricta, a close relative of Arabidopsis. (vol 144, pg 286, 2007). Plant Physiol 144, 1690–1690, doi: 10.1104/pp.107.900229 (2007).
Rushworth, C. A., Song, B. H., Lee, C. R. & Mitchell-Olds, T. Boechera, a model system for ecological genomics. Mol Ecol 20, 4843–4857, doi: 10.1111/j.1365-294X.2011.05340.x (2011).
Gols, R. et al. Genetic variation in defense chemistry in wild cabbages affects herbivores and their endoparasitoids. Ecology 89, 1616–1626, doi: Doi 10.1890/07-0873.1 (2008).
Badenes-Perez, F. R., Gershenzon, J. & Heckel, D. G. Insect Attraction versus Plant Defense: Young Leaves High in Glucosinolates Stimulate Oviposition by a Specialist Herbivore despite Poor Larval Survival due to High Saponin Content. PLoS ONE 9, e95766, doi: 10.1371/journal.pone.0095766 (2014).
Kuzina, V. et al. Barbarea vulgaris linkage map and quantitative trait loci for saponins, glucosinolates, hairiness and resistance to the herbivore Phyllotreta nemorum. Phytochemistry 72, 188–198, doi: 10.1016/j.phytochem.2010.11.007 (2011).
Wei, X. C. et al. Transcriptome Analysis of Barbarea vulgaris Infested with Diamondback Moth (Plutella xylostella) Larvae. Plos One 8, doi: ARTN e6448110.1371/journal.pone.0064481 (2013).
van Leur, H., Vet, L. E. M., Van der Putten, W. H. & van Dam, N. M. Barbarea vulgaris glucosinolate phenotypes differentially affect performance and preference of two different species of lepidopteran herbivores. J Chem Ecol 34, 121–131, doi: 10.1007/s10886-007-9424-9 (2008).
Nielsen, N. J., Nielsen, J. & Staerk, D. New Resistance-Correlated Saponins from the Insect-Resistant Crucifer Barbarea vulgaris. J Agr Food Chem 58, 5509–5514, doi: 10.1021/jf903988f (2010).
Augustin, J. M., Kuzina, V., Andersen, S. B. & Bak, S. Molecular activities, biosynthesis and evolution of triterpenoid saponins. Phytochemistry 72, 435–457, doi: 10.1016/j.phytochem.2011.01.015 (2011).
Agerbirk, N. et al. Multiple hydroxyphenethyl glucosinolate isomers and their tandem mass spectrometric distinction in a geographically structured polymorphism in the crucifer Barbarea vulgaris. Phytochemistry 115, 130–142, doi: 10.1016/j.phytochem.2014.09.003 (2015).
Pedras, M. S. C., Alavi, M. & To, Q. H. Expanding the nasturlexin family: Nasturlexins C and D and their sulfoxides are phytoalexins of the crucifers Barbarea vulgaris and B. verna. Phytochemistry 118, 131–138, doi: 10.1016/j.phytochem.2015.08.009 (2015).
Khakimov, B. et al. Identification and genome organization of saponin pathway genes from a wild crucifer, and their use for transient production of saponins in Nicotiana benthamiana. The Plant Journal 84, 478–490 (2015).
Christensen, S. et al. Different Geographical Distributions of Two Chemotypes of Barbarea vulgaris that Differ in Resistance to Insects and a Pathogen. J Chem Ecol 40, 491–501, doi: 10.1007/s10886-014-0430-4 (2014).
Agerbirk, N., Orgaard, M. & Nielsen, J. K. Glucosinolates, flea beetle resistance, and leaf pubescence as taxonomic characters in the genus Barbarea (Brassicaceae) (vol 63, pg 69, 2003). Phytochemistry 63, 69–80, doi: 10.1016/S0031-9422(03)00514-4 (2003).
Orgaard, M. & Linde-Laursen, I. Meiotic analysis of Danish species of Barbarea (Brassicaceae) using FISH: chromosome numbers and rDNA sites. Hereditas 145, 215–219, doi: 10.1111/j.1601-5223.2008.02063.x (2008).
Liu, T., Zhang, X., Yang, H., Agerbirk, N., Qiu, Y., Wang, H., Shen, D., Song, J. & Li, X. Aromatic glucosinolate biosynthesis pathway in Barbarea vulgaris and its response to Plutella xylostella infestation. Frontiers in Plant Science 7 (2016).
Nielsen, J. K., Nagao, T., Okabe, H. & Shinoda, T. Resistance in the Plant, Barbarea vulgaris, and Counter-Adaptations in Flea Beetles Mediated by Saponins. J Chem Ecol 36, 277–285, doi: 10.1007/s10886-010-9758-6 (2010).
Parra, G., Bradnam, K. & Korf, I. CEGMA: a pipeline to accurately annotate core genes in eukaryotic genornes. Bioinformatics 23, 1061–1067, doi: 10.1093/bioinformatics/btm071 (2007).
Elshire, R. J. et al. A Robust, Simple Genotyping-by-Sequencing (GBS) Approach for High Diversity Species. Plos One 6, doi: ARTN e1937910.1371/journal.pone.0019379 (2011).
Hu, T. T. et al. The Arabidopsis lyrata genome sequence and the basis of rapid genome size change. Nat Genet 43, 476-+, doi:10.1038/ng.807 (2011).
Holt, C. & Yandell, M. MAKER2: an annotation pipeline and genome-database management tool for second-generation genome projects. Bmc Bioinformatics 12, doi: Artn 49110.1186/1471-2105-12-491 (2011).
Kaul, S. et al. Analysis of the genome sequence of the flowering plant Arabidopsis thaliana. Nature 408, 796–815 (2000).
Slotte, T. et al. The Capsella rubella genome and the genomic consequences of rapid mating system evolution. Nat Genet 45, 831–U165, doi: 10.1038/ng.2669 (2013).
Wang, X. W. et al. The genome of the mesopolyploid crop species Brassica rapa. Nat Genet 43, 1035–U1157, doi: 10.1038/ng.919 (2011).
Li, L., Stoeckert, C. J. & Roos, D. S. OrthoMCL: Identification of ortholog groups for eukaryotic genomes. Genome Res 13, 2178–2189, doi: 10.1101/gr.1224503 (2003).
Symonds, V. V. et al. Mapping quantitative trait loci in multiple populations of Arabidopsis thaliana identifies natural allelic variation for trichome density. Genetics 169, 1649–1658, doi: 10.1534/genetics.104.031948 (2005).
Oppenheimer, D. G., Herman, P. L., Sivakumaran, S., Esch, J. & Marks, M. D. A Myb Gene Required for Leaf Trichome Differentiation in Arabidopsis Is Expressed in Stipules. Cell 67, 483–493, doi: Doi 10.1016/0092-8674(91)90523-2 (1991).
Bloomer, R. H., Juenger, T. E. & Symonds, V. V. Natural variation in GL1 and its effects on trichome density in Arabidopsis thaliana. Mol Ecol 21, 3501–3515, doi: 10.1111/j.1365-294X.2012.05630.x (2012).
Dubos, C. et al. MYB transcription factors in Arabidopsis. Trends Plant Sci 15, 573–581, doi: 10.1016/j.tplants.2010.06.005 (2010).
Agerbirk, N. et al. Specific Glucosinolate Analysis Reveals Variable Levels of Epimeric Glucobarbarins, Dietary Precursors of 5-Phenyloxazolidine-2-thiones, in Watercress Types with Contrasting Chromosome Numbers. J Agr Food Chem 62, 9586–9596, doi: 10.1021/jf5032795 (2014).
Sonderby, I. E., Geu-Flores, F. & Halkier, B. A. Biosynthesis of glucosinolates - gene discovery and beyond. Trends Plant Sci 15, 283–290, doi: 10.1016/j.tplants.2010.02.005 (2010).
Prasad, K. V. S. K. et al. A Gain-of-Function Polymorphism Controlling Complex Traits and Fitness in Nature. Science 337, 1081–1084, doi: 10.1126/science.1221636 (2012).
Hansen, B. G., Kliebenstein, D. J. & Halkier, B. A. Identification of a flavin-monooxygenase as the S-oxygenating enzyme in aliphatic glucosinolate biosynthesis in Arabidopsis. Plant J 50, 902–910, doi: 10.1111/j.1365-313X.2007.03101.x (2007).
Badenes-Perez, F. R., Reichelt, M., Gershenzon, J. & Heckel, D. G. Phylloplane location of glucosinolates in Barbarea spp. (Brassicaceae) and misleading assessment of host suitability by a specialist herbivore. New Phytol 189, 549–556, doi: 10.1111/j.1469-8137.2010.03486.x (2011).
Hansen, B. G. et al. A Novel 2-Oxoacid-Dependent Dioxygenase Involved in the Formation of the Goiterogenic 2-Hydroxybut-3-enyl Glucosinolate and Generalist Insect Resistance in Arabidopsis. Plant Physiol 148, 2096–2108, doi: 10.1104/pp.108.129981 (2008).
Zhang, X. H. et al. Expression patterns, molecular markers and genetic diversity of insect-susceptible and resistant Barbarea genotypes by comparative transcriptome analysis. Bmc Genomics 16, doi: Artn 48610.1186/S12864-015-1609-Y (2015).
van Molken, T. et al. Consequences of combined herbivore feeding and pathogen infection for fitness of Barbarea vulgaris plants. Oecologia 175, 589–600, doi: 10.1007/s00442-014-2928-4 (2014).
Nützmann, H.-W., Huang, A. & Osbourn, A. Plant metabolic clusters – from genetics to genomics. New Phytol, doi: doi:10.1111/nph.13981 (2016).
Peter Dalin, J. Å., Christer Björkman, Piritta Huttunen & Katri, Kärkkäinen . In Induced Plant Resistance to Herbivory (ed A. Schaller ) Ch. 4, 89–105 (Springer, 2008).
Khakimov, B. et al. Identification and genome organization of saponin pathway genes from a wild crucifer, and their use for transient production of saponins in Nicotiana benthamiana. Plant J 84, 478–490, doi: 10.1111/tpj.13012 (2015).
Gnerre, S. et al. High-quality draft assemblies of mammalian genomes from massively parallel sequence data. P Natl Acad Sci USA 108, 1513–1518, doi: 10.1073/pnas.1017351108 (2011).
Myers, E. W. et al. A whole-genome assembly of Drosophila. Science 287, 2196–2204, doi: DOI 10.1126/science.287.5461.2196 (2000).
Boetzer, M. & Pirovano, W. SSPACE-LongRead: scaffolding bacterial draft genomes using long read sequence information. Bmc Bioinformatics 15, 211, doi: 10.1186/1471-2105-15-211 (2014).
Boetzer, M., Henkel, C. V., Jansen, H. J., Butler, D. & Pirovano, W. Scaffolding pre-assembled contigs using SSPACE. Bioinformatics 27, 578–579, doi: 10.1093/bioinformatics/btq683 (2011).
English, A. C. et al. Mind the Gap: Upgrading Genomes with Pacific Biosciences RS Long-Read Sequencing Technology. Plos One 7, doi: ARTN e4776810.1371/journal.pone.0047768 (2012).
Grabherr, M. G. et al. Full-length transcriptome assembly from RNA-Seq data without a reference genome. Nature biotechnology 29, 644–652, doi: 10.1038/nbt.1883 (2011).
Korf, I. Gene finding in novel genomes. Bmc Bioinformatics 5, doi: Artn 59 10.1186/1471-2105-5-59 (2004).
Johnson, L., Eddy, S. & Portugaly, E. Hidden Markov model speed heuristic and iterative HMM search procedure. Bmc Bioinformatics 11, doi: 10.1186/1471-2105-11-431 (2010).
Petersen, T., Brunak, S., von Heijne, G. & Nielsen, H. SignalP 4.0: discriminating signal peptides from transmembrane regions. Nature Methods 8, 785–786, doi: 10.1038/nmeth.1701 (2011).
Krogh, A., Larsson, B., von Heijne, G. & Sonnhammer, E. Predicting transmembrane protein topology with a hidden Markov model: Application to complete genomes. Journal of Molecular Biology 305, 567–580, doi: 10.1006/jmbi.2000.4315 (2001).
Kent, W. J. BLAT - The BLAST-like alignment tool. Genome Res 12, 656–664, doi: 10.1101/gr.229202 (2002).
Ryan, J. Baa . pl: A tool to evaluate de novo genome assemblies with RNA transcripts. arXiv preprint arXiv:1309.2087 (2013).
Li, H. & Durbin, R. Fast and accurate short read alignment with Burrows-Wheeler transform. Bioinformatics 25, 1754–1760, doi: 10.1093/bioinformatics/btp324 (2009).
DePristo, M. A. et al. A framework for variation discovery and genotyping using next-generation DNA sequencing data. Nat Genet 43, 491-+, doi:10.1038/ng.806 (2011).
Stam, P. Construction of Integrated Genetic-Linkage Maps by Means of a New Computer Package - Joinmap. Plant J 3, 739–744, doi: DOI 10.1111/j.1365-313X.1993.00739.x (1993).
Van Ooijen, J. W. Multipoint maximum likelihood mapping in a full-sib family of an outbreeding species. Genet Res 93, 343–349, doi: 10.1017/S0016672311000279 (2011).
Tamura, K., Stecher, G., Peterson, D., Filipski, A. & Kumar, S. MEGA6: Molecular Evolutionary Genetics Analysis Version 6.0. Mol Biol Evol 30, 2725–2729, doi: 10.1093/molbev/mst197 (2013).
Jones, D. T., Taylor, W. R. & Thornton, J. M. The Rapid Generation of Mutation Data Matrices from Protein Sequences. Comput Appl Biosci 8, 275–282 (1992).
Tang, H. et al. ALLMAPS: robust scaffold ordering based on multiple maps. Genome biology 16, 3, doi: 10.1186/s13059-014-0573-1 (2015).
Derrien, T., Andre, C., Galibert, F. & Hitte, C. AutoGRAPH: an interactive web server for automating and visualizing comparative genome maps. Bioinformatics 23, 498–499, doi: 10.1093/bioinformatics/btl618 (2007).
Veltri, D., Wight, M. M. & Crouch, J. A. SimpleSynteny: a web-based tool for visualization of microsynteny across multiple species. Nucleic Acids Res 44, W41–W45, doi: 10.1093/nar/gkw330 (2016).
Arends, D., Prins, P., Jansen, R. C. & Broman, K. W. R/qtl: high-throughput multiple QTL mapping. Bioinformatics 26, 2990–2992, doi: 10.1093/bioinformatics/btq565 (2010).
Broman, K. W., Wu, H., Sen, S. & Churchill, G. A. R/qtl: QTL mapping in experimental crosses. Bioinformatics 19, 889–890, doi: 10.1093/bioinformatics/btg112 (2003).
R. Core Team . R: A language and environment for statistical computing, http://www.R-project.org/ (2012).
Cingolani, P. et al. A program for annotating and predicting the effects of single nucleotide polymorphisms, SnpEff: SNPs in the genome of Drosophila melanogaster strain w (1118); iso-2; iso-3. Fly 6, 80–92, doi: 10.4161/fly.19695 (2012).
We thank the Duke Center for Genomic and Computational Biology Genome Sequencing Shared Resource (Durham, NC), which provided the PacBio sequencing service. Danish council for independent research to Søren Bak DFF – 1335-00151. The Danish Council for Independent Research to Thure Hauser (no. 09–065899).
The authors declare no competing financial interests.
About this article
Cite this article
Byrne, S., Erthmann, P., Agerbirk, N. et al. The genome sequence of Barbarea vulgaris facilitates the study of ecological biochemistry. Sci Rep 7, 40728 (2017). https://doi.org/10.1038/srep40728
The cytochrome P450 CYP72A552 is key to production of hederagenin‐based saponins that mediate plant defense against herbivores
New Phytologist (2019)
Frontiers in Plant Science (2019)