As the search for new antimalarial compounds has intensified, isoprenoid biosynthesis has emerged as an essential metabolic process that is sensitive to chemical inhibition and is thus a prominent candidate for drug intervention against the malaria parasite1,2,3,4. Isoprenoids represent a diverse class of natural products, which are essential for many cellular functions, including protein prenylation and electron transport5,6. The biosynthesis of isoprenoids requires the production of two building blocks: the universal five-carbon precursors, isopentenyl pyrophosphate (IPP) and its isomer dimethylallyl pyrophosphate (DMAPP)7. Mammals synthesize IPP and DMAPP via the well-studied, coenzyme-A dependent, mevalonate (MVA) pathway8. In contrast, eubacteria and plastid-containing eukaryotes, including Plasmodium spp. parasites, utilize the methylerythritol phosphate (MEP) pathway to generate isoprenoid precursors (Fig. 1)2,9. As the MVA and MEP pathways evolved independently, these pathways remain chemically and enzymatically distinct, enabling parasite-specific inhibition with minimal risk of toxicity to human cells10.

Figure 1
figure 1

The non-mevalonate methylerythritol phosphate (MEP) pathway of isoprenoid biosynthesis.

Chemical structures of the native substrates and products of each enzyme in the MEP pathway are depicted: 1-deoxy-D-xylulose-5-phosphate synthase (DOXP Synthase); 1-deoxy-D-xylulose-5-phosphate reductoisomerase (IspC); 2-C-methyl-D-erythritol-4-phosphate cytidyltransferase (IspD); 4-diphosphocytidyl-2C-methyl-D-erythritol kinase (IspE); 2-C-methyl-D-eryth-ritol-2,4-cyclodiphosphate synthase (IspF); 1-hydroxy-2-methyl-2-(E)-butenyl-4-diphosphate synthase (IspG); 4-hydroxy-3-methyl-2-(E)-butenyl-4-diphosphate reductase (IspH).

Small molecule inhibitors have been described against many enzymes of the MEP pathway through a number of programs aimed to harness the commercial, agricultural, and clinical potential of MEP pathway inhibition1,11,12. To date, the best-characterized inhibitor of the MEP pathway is the phosphonic acid antibiotic, fosmidomycin (FSM), a potent in vitro inhibitor of 1-deoxy-D-xylulose 5-phosphate reductoisomerase (IspC), the first dedicated enzyme in the MEP pathway (Fig. 1)13. FSM has undergone Phase II clinical trials as a potential antimalarial chemotherapeutic in combination with clindamycin and piperaquine14 and has therefore demonstrated the validity and safety of targeting MEP pathway enzymes as an antimalarial strategy15.

The second dedicated enzyme of the MEP pathway is 2-C-methyl-D-erythritol-4-phosphate cytidyltransferase (IspD), which catalyzes the condensation of methylerythritol phosphate (MEP) with cytidine triphosphate (CTP) to generate 4-diphosphocytidyl-2-C-methyl-D-erythritol (CDP-ME) and inorganic pyrophosphate7,16. We and others have previously reported small molecule inhibitors of IspD (1 and 2, Fig. 2), confirming that IspD homologs are amenable to chemical inhibition12,17,18. These IspD inhibitors have generally shown high-micromolar activity, although some herbicidal A. thaliana species-selective nanomolar templates have also been identified (3a and 3b, Fig. 2). More recently, a chemical rescue screen identified 4 (1R,3S-MMV008138) from the Medicines for Malaria Venture (MMV) “malaria box” as a potent inhibitor of P. falciparum IspD (PfIspD), showing nanomolar inhibition of recombinant enzyme activity and sub-micromolar inhibition of parasite growth (Fig. 2)19,20,21,22.

Figure 2
figure 2

Known IspD inhibitors.

Here we report the discovery of a new series of antimalarial IspD inhibitors and determination of their mechanism of action. We have employed a combined approach of chemoinformatics and high-throughput enzymatic screening to identify a new, chemically distinct series of IspD enzyme inhibitors that inhibit P. falciparum growth through disruption of isoprenoid biosynthesis in the Plasmodium parasite. Following chemotype identification, we have further developed this series, building structure-activity relationship around the chosen chemical motif and improving drug-like inhibitor properties. Finally, we have employed a combination of molecular modelling studies, site-directed mutagenesis and structural elucidation to determine the molecular mechanism by which these compounds achieve enzyme inhibition. This work has identified a series of compounds that are chemically tractable, possess drug-like properties, and show significant promise for development as novel and potent antimalarial chemotherapies.


Identification and optimization of benzoisothiazolone PfIspD inhibitors

A high-throughput screen (HTS) was developed to identify inhibitors of purified recombinant PfIspD. An assay protocol and chemoinformatics strategy (Methods: Chemoinformatics strategy) suitable for HTS were optimized and validated for screening with the Z’ ranging from 0.85 to 0.9523. With active compounds defined as displaying an PfIspD IC50 of <20 μM, a total of 208 hit compounds were identified from the HTS study, comprising over 10 structural chemotypes. Significantly, the 2-phenyl benzo[d]isothiazol-3(2H)-one (BITZ) chemotype was repeatedly identified within a number of hit structures, including 7, which exhibited a PfIspD IC50 value of 450 ± 79 nM (Table 1).

Table 1 Chemical structures of 7–13 with corresponding inhibitory activity (mean and SEM; n ≥ 3) against PfIspD, P. falciparum growth in culture (strain 3D7), and PvIspD.

A number of analogs, based around 7, were synthesized to explore the structure-activity relationship around the BITZ chemotype and analyze the nature and tolerance of the IspD active site. The bi-aryl BITZ template was selected to enable structural and chemical modification to the C and D rings adjacent to the inhibitor core (813, Table 1) with the aims of varying lipophilicity, improving solubility, and introducing functionality to enhance potency at PfIspD. A representative four-step synthesis of target compounds is shown (Fig. 3) involving an acid-chloride mediated amide coupling of 2-(methylthio) benzoic acid and 3-iodoaniline, generating a (methyl-thio)benzamide, 5a24. Oxidation of 5a to the corresponding sulfoxide, 5b24, followed by Suzuki-Miyaura cross-coupling reactions25, using a range of para-substituted phenyl boronic acids, was employed to generate intermediates 5cg. The methylsulfinyl benzamides, 5cg, were cyclized using a thionyl chloride-mediated ring closure26 to give selected inhibitors 812. Inhibitor 13 was generated using an alternative three-step synthesis where a stable and isolatable acid chloride was employed for the generation of the core BITZ motif (Supplementary Fig. F1).

Figure 3
figure 3

General synthetic strategy for inhibitors 8–12.

(a) SOCl2 (3.0 eq), toluene, DMF, reflux, 2–3 hours: then 3-iodoaniline (1.2 eq), Et3N (2.0 eq), THF, 10 minutes at 0 °C, 20 hours at 22 °C; 98% yield. (b) NaIO4 in H2O (1.6 eq), MeOH, 50 °C, 4–5 hours; 96% yield. (c) Phenyl boronic acid (1.2 eq), K2CO3 (3.3 eq), [Pd(PPh3)4] (0.025 eq), H2O:THF (1:2), 80 °C, 18–22 hours; 80–87% yield. (d) SOCl2 (1.3 eq), DCM, 50 °C, 1.5 hours; 35–74% yield.

Several compounds demonstrated low micromolar to nanomolar activity against P. falciparum and P. vivax IspD enzymes (Table 1), highlighting both the efficacy of these compounds and their potential to act as broad spectrum antimalarial agents. Overall, the series 813 demonstrated good correlation between PfIspD enzyme inhibition and inhibition of parasite growth (r2 = 0.91, Fig. 4).

Figure 4
figure 4

Correlation of enzyme PfIspD enzymatic inhibition and anti-parasitic activity for inhibitors 8–13.

Dose-dependent inhibition of enzyme activity and P. falciparum parasite growth was measured for 8–13 (Table 1) and half-maximal inhibitory concentrations determined prior to least-squares linear regression analysis (coefficient of determination, r2 = 0.91; GraphPad Prism). Mean values given with SEM; n ≥ 3.

Given the ongoing and widespread issues of drug resistance to P. falciparum, it is critical that existing drug-resistant parasites are not cross-resistant to novel therapies in development. Therefore, we evaluated the antimalarial potency of BITZ compounds against a series of lab-adapted field isolates of P. falciparum, including strains resistant to chloroquine, mefloquine and artemisinin. We find that 8 effectively inhibits the growth of three lines of drug-resistant P. falciparum parasites (Table 2). These studies demonstrate the promise of BITZ compounds to inhibit parasite growth in Plasmodium strains with acquired resistance against current antimalarial drugs.

Table 2 Inhibitory activity of 8 against drug-resistant P. falciparum parasites grown in culture (mean and SEM; ≥3).

In optimising BITZ compounds, it was noted that meta-aryl functionalization across the C-ring consistently gave good levels of enzyme inhibition and that this substitution pattern is required to maintain potent PfIspD inhibitory activity. In comparison, para-substitution across the C-ring lowered activity for series analogs, highlighting the importance of active site-inhibitor shape complementarity (Supplementary Table T1). Para-substitution within the D-ring, using electron releasing or withdrawing groups (810) was well tolerated, with PfIspD IC50 values as low as 73 ± 20 nM and parasite EC50 of 1.1 ± 0.16 μM, with P. vivax IspD (PvIspD) IC50 values of 57 ± 13 nM for the para-chloro analog 9. In order to enhance aqueous solubility, methylene-linked polar heterocyclic groups were incorporated, exemplified by 1113. Inhibitor 11 showed a 100-fold increase in predicted aqueous solubility compared to 9, a reduction in ClogD from 4.98 to 3.80, and displayed nanomolar inhibitory activity against PfIspD, PvIspD, and cultured P. falciparum, demonstrating that inhibitor activity of this series can be maintained whilst enhancing drug-like properties.

BITZ compounds inhibit isoprenoid metabolism in malaria parasites

To establish that anti-parasitic activity was the result of methylerythritol phosphate (MEP) pathway inhibition, we performed targeted metabolic profiling of MEP pathway intermediates in parasites treated with our BITZ IspD-inhibiting compounds. Early ring-stage cultures of P. falciparum were treated with compound concentrations at ~5 times the IC50 of 8 for 10 hours and MEP pathway intermediates were quantified by LC-MS/MS analysis as described elsewhere27. Similar to the established MEP inhibitor, FSM, 8 produced a significant decrease in MEcPP levels (p = 0.004: Fig. 5); however, levels of the upstream metabolite, DOXP, were not affected by treatment with 8 (p = 0.94: Fig. 5). These results mirror those seen under comparable treatment with the established IspC inhibitor, FSM19, and therefore confirm that BITZ compounds inhibit the MEP pathway at levels known to affect asexual parasite growth.

Figure 5
figure 5

BITZ compounds inhibit the MEP pathway in P. falciparum.

P. falciparum cultures were treated with 5 μM FSM or 3 μM 8 for 10 hours. Levels of the MEP pathway metabolites, DOXP and MEcPP, were measured using LC-MS/MS and compared to the levels in untreated parasites. Mean and standard error values from 3 independent experiments displayed. Asterisks (*) indicate significance threshold (alpha) = 0.05. Significant decreases in MEcPP levels were observed under treatment with both FSM (p = 0.0038) and compound 8 (p = 0.0042).

In malaria parasites, supplementation with the isoprenoid precursor, IPP, has been demonstrated to rescue MEP pathway dysfunction. For example, IPP supplementation has been shown to allow parasite growth during treatment with either the DXR inhibitor, fosmidomycin (FSM), or the IspD inhibitor, 1R,3S-MMV00813820,21,28. In order to determine whether BITZ inhibition was specific to activity against the MEP pathway, we tested for IPP rescue during treatment with compound 8. No rescue was observed (p = 0.75; Supplementary Table T2). The observed correlation between enzymatic inhibition and parasite growth inhibition (Fig. 4), as well as metabolic analysis (Fig. 5), suggest that growth inhibition under treatment with BITZ compounds involves inhibition of the IspD enzyme. However, this lack of rescue by IPP supplementation suggests that off-target activity also contributes to parasite growth inhibition.

BITZ compounds inhibit IspD enzymes through covalent active site modification

To gain insight into the mechanism of enzyme inhibition, we developed a PfIspD homology model19 based on an E. coli IspD (EcIspD) protein structure (PDB ID: 1I5229). Molecular docking of 8 clearly indicates that the inhibitor binds within the CTP substrate-binding pocket, placing the BITZ warhead proximal to the PfIspD active site cysteine-202 (Cys-202) residue. We therefore predicted that the thiol moiety of Cys-202 would likely react with the sulfur heteroatom of BITZ inhibitors, forming a covalent disulfide adduct, while the carbonyl oxygen would be within hydrogen bonding distance of the backbone nitrogen atoms of Gly-203 and Gly-204 (Fig. 6). Formation of the covalent adduct would occlude the active site, preventing natural substrate binding and render the PfIspD enzyme inactive. The active site Cys-202 residue is conserved in Plasmodium spp. IspD enzymes but not in bacterial homologs (Fig. 7a). BITZ compounds are found to be ineffective against EcIspD enzyme activity (Fig. 7d), thus supporting the proposed involvement of and specific requirement for this Cys-202 residue, which is not present in the E. coli enzyme.

Figure 6
figure 6

Inhibitor 8 modeled in the active site of PfIspD homology model, covalently bound at Cys-202.

PfIspD active site rendered as a white surface. Residues predicted to interact with inhibitors (Gly-203 and Gly-204, hydrogen bonds; Cys-202, disulfide adduct) are depicted as sticks (carbon, orange; oxygen, red; nitrogen, blue; sulfur, yellow). 8 displayed as sticks (carbon, grey; oxygen, red; nitrogen, blue; sulfur, yellow). Hydrogen bonds depicted as black, dotted lines (predicted hydrogen bond distance in Ångstroms). Image created using PyMOL Molecular Graphics System, Version, Schrodinger, LLC.

Figure 7
figure 7

BITZ compounds inhibit PfIspD through disulfide bond formation.

(a) Alignment of IspD homologs: active site Cys residue is conserved in Plasmodium spp. but is absent in bacterial orthologs that are insensitive to BITZ inhibitors. (b) Dose-dependent inhibition of purified recombinant PfIspD-wt compared to PfIspD-C202A on treatment with 8. Representative data shown; n ≥ 3. (c) Time-dependent changes in inhibition of recombinant PfIspD-wt enzyme activity following treatment with 8. Mean and SEM displayed; n ≥ 4 for each data point. (d) Dose-dependent inhibition of recombinant EcIspD-wt compared to EcIspD-A14C by 8. Representative data shown; n ≥ 3.

Our modelling studies predicted that mutation of Cys-202 to an alanine (Ala) residue would decrease the sensitivity of PfIspD to this BITZ compound class. Indeed, introducing this PfIspD mutation resulted in a 6-fold decrease in sensitivity: [PfIspD-wt IC50 = 81 ± 13 nM, while PfIspD-C202A IC50 = 470 ± 39 nM] (Fig. 7b) following prolonged (50 min.) incubations with 8. This clear sensitivity change underlines the importance of Cys-202 for inhibitor activity, but may reflect both a loss of covalent bond formation and a change in compound fit within the active site following introduction of this mutation to the inhibitor binding region.

Covalent inhibition is often marked by an increase in the apparent potency of an inhibitor over time, as irreversible associations are gradually made between the inhibitor and enzyme. To evaluate this premise with respect to our proposed mechanism of enzyme inhibition, PfIspD and various concentrations of 8 were pre-incubated prior to measurement of enzyme activity. As expected for covalent inhibition, the potency of 8 increased over time (PfIspD-wt IC50 = 330 ± 57 nM at five min. and 81 ± 13 nM at 50 min.; p = 0.0007; Fig. 7c) whereas no such substantial or significant change in PfIspD-C202A inhibition was observed over the same time period (PfIspD-C202A IC50 data of 860 ± 220 nM at five min. and 470 ± 39 nM at 50 min.; p = 0.32). These results highlight the importance of the proposed covalent interactions with Cys-202 during inhibition of PfIspD by BITZ inhibitors.

Once an inhibitor-adduct has formed, increasing substrate concentration should not relieve covalent enzyme inhibition. Consistent with this model, the susceptibility of PfIspD-wt to inhibition by 8, following prolonged incubation, was not substantially affected by CTP substrate concentration (Fig. 8b). In contrast, inhibition by 8 was somewhat relieved under higher CTP concentrations over shorter incubation periods, as is typically observed for reversible competitive inhibitors (Fig. 8a). Together, these observations are consistent with relatively slow inhibitor-enzyme adduct formation within the CTP binding site, as predicted by our molecular docking model. Inhibition of PfIspD-C202A activity was not significantly affected by CTP concentrations over short or long incubations with 8 (Fig. 8c,d), demonstrating that the CTP-site binding does not substantially contribute to inhibition of mutant PfIspD-C202A and suggests an independent mode of inhibition of PfIspD-C202A.

Figure 8
figure 8

Inhibition of recombinant PfIspD enzymes.

(a) Treatment of PfIspD-wt with 8 at varying CTP concentrations shows the concentration of CTP substrate affects the strength of inhibition at early time points. Five min. IC50 values gave 120 ± 17 nM at 100 μM CTP and 330 ± 57 nM at 400 μM CTP; p = 0.04. Representative data shown; n ≥ 3. (b) Treatment of PfIspD-wt with 8 at varying CTP concentrations shows the concentration of CTP substrate does not affect the strength of inhibition following extended incubation. 50 min. IC50 values gave 49 ± 7.6 nM at 100 μM CTP and 81 ± 13 nM at 400 μM CTP; p = 0.17. Representative data shown; n ≥ 3. (c) Treatment of PfIspD-C202A with 8 at varying CTP concentrations shows the concentration of CTP substrate does not affect the strength of inhibition at early time points. Five min. IC50 values gave 660 ± 130 nM at 100 μM CTP and 860 ± 120 nM at 400 μM CTP; p = 0.32. Representative data shown; n ≥ 3. (d) Treatment of PfIspD-C202A with 8 at varying CTP concentrations shows the concentration of the CTP substrate does not affect the strength of inhibition following extended incubation. 50 min. IC50 values gave 414 ± 86 nM at 100 μM CTP and 470 ± 39 nM at 400 μM CTP; p = 0.57. Representative data shown; n ≥ 3.

While both P. falciparum and P. vivax IspD homologs possess an active site Cys-202 residue, the corresponding residue in bacterial IspD homologs is alanine (Ala) (Fig. 7a). In contrast to the inhibitory IspD activity shown by BITZ analogues at P. falciparum and P. vivax IspD homologs (Table 1), we found that recombinant EcIspD was highly resistant to inhibition by 8 (Fig. 7d). Therefore, to confirm the critical role of active site Cys residues in inhibition, we generated a variant EcIspD protein, in which the corresponding Ala residue was substituted with a Cys residue by introduction of the A14C mutation. EcIspD-A14C was rendered sensitive to 8, with an IC50 of 440 ± 48 nM (Fig. 7d). EcIspD-A14C was crystallized in the presence of 5 mM of 8 (Supplementary Table T3), providing supportive structural data. While electron density corresponding to 8 was not observed, the resulting crystal structure revealed formation of a novel intramolecular bond, leading to occlusion of the CTP binding site, thus providing modest additional evidence for a temporary covalent interaction between the inhibitor and the Cys-14 residue (Supplementary Fig. F2).


The non-mevalonate (MEP) pathway of isoprenoid biosynthesis is highly desirable as a target for antimalarial drug development, as the parasite-specific enzymes of this pathway do not have mammalian homologs. Since isoprenoid biosynthesis contributes to a number of essential cellular functions, MEP pathway function is required for asexual replication of Plasmodium spp. parasites. Despite the promise of new MEP pathway-targeting agents, few studies have explored the potential of targeting the second-dedicated enzyme of this pathway, 2-C-methyl-D-erythritol-4-phosphate cytidyltransferase (IspD), for the purpose of antimalarial chemotherapy. We have previously established that the ISPD gene of P. falciparum is resistant to genetic disruption and that the PfIspD enzyme is amenable to small molecule inhibition19. We now report a new, structurally distinct class of PfIspD 2-phenyl benzo[d]isothiazol-3(2H)-one (BITZ) inhibitors with antimalarial activity, which were identified through a target-based high-throughput study.

We find that BITZ compounds inhibit IspD enzymatic activity of both P. falciparum and P. vivax and that the IspD-inhibitory activity and antimalarial efficacy of these compounds are correlated (Fig. 4). Furthermore, we find that treatment of P. falciparum with growth-inhibitory concentrations of BITZ compounds is sufficient to disrupt de novo production of isoprenoid precursors. These findings strongly indicate that BITZ compounds inhibit parasite growth, at least in part, through inhibition of cellular IspD, as predicted. Importantly, parasite strains resistant to current generation antimalarials do not possess cross-resistance to BITZ compounds.

Our studies staunchly suggest that these novel IspD-inhibiting BITZ compounds have a distinctive mechanism of action that relies on the formation of a covalent enzyme-inhibitor adduct, with several lines of evidence supporting this mechanism of inhibition. First, BITZ inhibitors are competitive with CTP during short incubation periods but enzymatic inhibition cannot be out-competed following prolonged incubation of PfIspD with the inhibitor, suggesting that a covalent bond is likely formed. Importantly, molecular modelling implicates a specific residue, Cys-202, as a likely site of enzyme modification by BITZ compounds. Supporting this model, we find that mutation of Cys-202 to an alanine residue confers BITZ resistance to recombinant PfIspD enzyme (Fig. 7). In addition, we find that the bacterial IspD enzyme, EcIspD, which possesses an alanine at the analogous position to Cys-202, is insensitive to BITZ compounds, but can be rendered sensitive via replacement of the alanine residue with cysteine. The proposed mechanism of enzyme inhibition thus provides an explanation for the marked species-selectivity of BITZ compounds and their inhibitory activity amongst IspD homologs, despite the overall sequence homology across this group of enzymes.

The demonstrated cysteine reactivity of our BITZ compound series suggests that development of this series may be hampered by possible polypharmacology. However, several recent reviews have noted that covalent mechanisms of action are prevalent among successful drugs30,31. Indeed, aspirin, also a covalent modifier, is one of the most widely used drug in the world. The polypharmacology of bioactive molecules32,33 and approved drugs34 has similarly been studied and is consistent with the concept that safe and effective drugs are invariably active at many targets. One such study calculates that, on average, approved therapeutics are active against approximately seven different molecular targets35. Since rescue with the isoprenoid precursor, IPP, is not observed, it is apparent that parasite growth inhibition by our BITZ compound series does not result solely from activity against IspD. Further studies may shed light on additional targets. Certainly continued vigilance will be required as BITZ compounds and their derivatives progress in development, with continued monitoring for potential promiscuous and off-target reactivity that may lead to toxicity. However, it should be noted that, similar BITZ chemotypes have demonstrated successful medicinal chemistry optimisation36,37,38,39,40,41,42. Recently, a molecule containing a BITZ moiety has begun Phase II clinical trials as an antiviral agent, providing important evidence that the potential reactivity of the BITZ moiety alone is not incompatible with a safe therapeutic profile43.

In conclusion, we have identified novel PfIspD 2-phenyl benzo[d]isothiazol-3(2H)-one inhibitors, initiated from a HTS study. Following discovery of 7, several structural analogs were generated around the identified BITZ motif which display increased potency, both enzymatically and phenotypically, compared to the initial hit. We have shown that the BITZ motif and corresponding analogues act as potent PfIspD inhibitors and offer potential as a broad spectrum antimalarial agents. In addition, we have demonstrated that these compounds also express inhibitory activity against P. falciparum parasite strains which show drug resistance to existing antimalarial therapies. Our studies clearly define the mechanism of inhibition of the BITZ chemotype and corresponding analogues, with selectivity for PfIspD relying on the presence of an active site Cys residue. A mechanism of inhibition has been deciphered whereby a disulfide adduct is formed between PfIspD Cys-202 and the electrophilic sulfur atom of the BITZ inhibitor core. The next stages of hit development will focus on improving the efficacy, solubility, and PK properties of the most potent PfIspD inhibitors. The potential promiscuity of the BITZ warhead and possible binding events at additional protein contacts will also require careful consideration. However, as interest in the covalent modification of drug targets within drug design increases, similar techniques and experiments to those outlined here may be used to probe other identified Cys modifiers which may be capable of enacting this mode of covalent modification. As more researchers study the MEP pathway and screen for inhibitors of its different enzymes, expectations dictate that it will become a recognized target for the treatment of not just malaria, but also tuberculosis and other bacterial pathogens.


Chemoinformatics strategy

A chemoinformatics strategy was employed to identify possible inhibitors using known IspD substrates and inhibitors, metal binding moieties, and biphosphate isosteres as query molecules for performing similarity and scaffold-hopping database searches44. A number of algorithms were applied, including molecular fingerprints45, turbo similarity46, principal component analysis, Bayesian modelling47, and machine learning to select ~10,000 compounds for screening. The selected structures were chosen from a commercial library of ~500,000 compounds (BioFocus DPI) that were predicted to possess favorable absorption, distribution, metabolism, excretion, and toxicity characteristics48.

Molecular Modelling

A homology model of PfIspD was constructed using the PHYRE online homology modelling program49. PfIspD primary sequence Q8I273 was obtained from UNIPROT (, accessed 10/12/14). A number of protein alignments and homology models were constructed by PHYRE, and the model with 98.82% confidence was selected, which was based on an E. coli IspD structure (PDB accession code 1I52)29. 1I52 is a 1.50-Å resolution crystal structure of E. coli IspD, complexed with CDP-ME in the active site. The structure of the model was validated using the WHATIF web interface50. 8 and other BITZ inhibitors were modelled in silico using the homology model described above in order to visualize the interactions between each analogue and the active site. Using GOLD, protons were added and docking was performed with default parameters, except that GoldScore was used and 50 docking poses were obtained for comparison and analysis. Covalent docking was performed using GOLD with the C-alpha atom of Cys-202 as the link atom to BITZ inhibitor 851.

Purification of IspD proteins

Plasmids derived from pBG1861, containing wildtype or mutant alleles of Plasmodium spp. or E. coli IspD, were used to transform Artic Express (DE3) RIL E. coli cells (Stratagene). Cells were grown in LB broth with 100 μg/mL ampicillin at 37 °C and 200 rpm. During mid-logarithmic growth, cultures were cooled to 8 °C, and protein expression was induced with 1 mM IPTG for 16 hours.

After induction, cell pellets were lysed by sonication in lysis buffer (25 mM Tris pH 7.5, 250 mM NaCl, 1 mM MgCl2, 1 mM dithiothreitol (DTT), 20 mM imidazole, 10% glycerol, 0.1% Triton X-100, 200 μM PMSF, 1 mg/mL lysozyme, 0.3 U/mL benzonase nuclease (Novagen), and Roche Complete EDTA-free protease inhibitor). 6His-tagged IspD proteins were purified from soluble lysate over Ni-NTA resin (Goldbio). Beads were washed with 250 mM NaCl, 25 mM Tris pH 7.5, 1 mM MgCl2, 20 mM imidazole, and protein was eluted with 250 mM NaCl, 25 mM Tris pH 7.5, 1 mM MgCl2, 300 mM imidazole. Affinity purification of PvIspD proceeded similarly to PfIspD purifications, except that 0.1% Triton X-100 and 10% glycerol were not present in the lysis buffer. 10% glycerol was also absent from the lysis buffer used in purifying wildtype and A14C E. coli IspD, and lysis buffer used in purifying wildtype and C202A PfIspD used in mechanistic studies (Figs 7 and 8).

Affinity-purified proteins were further purified over a HiLoad 16/60 Superdex 200 gel filtration column (GE Health Sciences), using an AKTA Explorer 100 FPLC (GE Health Sciences). FPLC buffer contained 250 mM NaCl, 25 mM Tris pH 7.5, 1 mM MgCl2. Fractions containing purified protein (>90% pure as evaluated by SDS-PAGE) were pooled and concentrated by centrifugation using Amicon Ultra-15 Centrifugal Filter Units (EMD Millipore). Concentrated protein was supplemented with 10% glycerol and 1 mM DTT (although DTT was omitted from wildtype and C202A PfIspD preparations used in mechanism of action studies, (Figs 7 and 8), flash-frozen in liquid nitrogen, and stored at −80 °C. Protein concentration was measured using a BCA protein assay kit (Thermo Scientific).

MEP metabolite profiling

Prior to treatment, parasites were synchronized by 1–2 treatments with 5% sorbitol until >8% parasitemia and >75% ring-stage cultures were achieved. At this point, cultures were treated 10 hours with 5 μM compound 8, 5 μM fosmidomycin, or left untreated. Following treatment, parasite-infected erythrocytes were lysed with 0.1% saponin, washed in phosphate-buffered saline, and stored at −80°C until extraction and quantitative LC-MS/MS measurement of DOXP and MEcPP, as previously described. Values reflect the mean and standard error from ≥3 independent experiments and were compared using the Student’s t-test (two-tailed).

Cloning of PfIspD and orthologs

P. falciparum: The construct used for expression of the codon-optimized PfIspD protein has been described previously19. To generate the PfIspD variants containing the C202A mutation, N- and C-terminal fragments of the optimized PfISPD gene were amplified from the above vector using the following primers. C202A N-terminal fragment: T7 Fwd primer, 5′-TAATACGACTCACTATAGGG-3′, with C202A Rev primer, 5′-GTTTGCCAATACCGCCGGCTAGCAGGATACTATGAATG-3′; C202 C-terminal fragment, C202A Fwd primer, 5′-CATTCATAGTATCCTGCTAGCCGGCGGTATTGGCAAAC-3′, with T7 Rev primer, 5′-GCTAGTTATTGCTCAGCGG-3′. Amplicons containing the entire PfISPD gene were generated using PfIspD Fwd and Rev primers, which introduce a 6-His tag, with N- and C-terminal fragments as template (PfIspD Fwd primer: 5′-CTCACCACCACCACCACCATATGATGCACATCTACGATAATAATAA-3′; PfIspD Rev: 5′-ATCCTATCTTACTCACTTATTTTGAGGAGTAGTAGAAT-3′). Following amplification, PfISPD variants were cloned into pBG1861 by ligation-independent cloning as previously described19,52, and verified by Sanger sequencing.

P. vivax: The construct used for expression of codon-optimized PvIspD (P. vivax Sal-1; PVX_081425) has been previously described19.

E. coli: The construct used for expression of EcIspD-wt has been previously described27. The A14C mutation was introduced by first generating N- and C-terminal gene fragments containing the mutation. These fragments were generated using the following primers: A14C N-terminal fragment: T7 Fwd primer, 5′-TAATACGACTCACTATAGGG-3′, with A14C Rev primer, 5′-CATTCGACGGCCAAATCCGGCACACGGAACCACGGCGCAAACATC-3′; A14C C-terminal fragment, A14C Fwd primer, 5′-GATGTTTGCGCCGTGGTTCCGTGTGCCGGATTTGGCCGTCGAATG-3′, with T7 Rev primer, 5′-GCTAGTTATTGCTCAGCGG-3′. Amplicons containing the entire E. coli IspD gene were generated using EcIspD Fwd and Rev primers, which introduce a 6-His tag, with N- and C-terminal fragments as template (EcIspD Fwd primer: 5′-CTCACCACCACCACCACCATATGATGGCAACCACTCATTTGG-3′; EcIspD Rev primer: 5′-ATCCTATCTTACTCACTTATTTGTATTCTCCTGATGG-3′). Following amplification, E. coli A14C-IspD was cloned into pBG1861 by ligation-independent cloning as previously described52, and verified by Sanger sequencing.

IspD assay conditions

Phosphate released by IspD was quantified using the EnzChek Phosphate Assay Kit (Invitrogen, Life Technologies), as previously described27. 2-Amino-6-mercapto-7-methylpurine riboside (MESG) and purine nucleoside phosphorylase (PNP) were diluted and stored according to the manufacturer’s instructions. Final concentrations of reagents were as follows: 100 mM NaCl, 25 mM Tris pH 7.5, 7.5 mM MgCl2, 1 U/ml PNP, 0.1 U/mL yeast inorganic pyrophosphatase (New England Biolabs). Unless otherwise specified, IC50 assays contained 50 nM enzyme, 400 μM CTP (Sigma), 200 μM MEP (Echelon Biosciences), 2% DMSO (vehicle), and 200 μM MESG. Reactions were performed in 50 μL final volumes in 96-well clear flat bottom plates. In general, enzymes, buffers, and inhibitors were pre-warmed approximately 15 minutes at 37 °C, and reactions were then initiated by addition of the MEP substrate. Timed inhibitor 8 IC50 assays (5, 20, 35, and 50 minute incubations) and comparisons between behavior at 100 μM and 400 μM CTP were initiated by the addition of the CTP substrate and contained 100 nM enzyme. Assays using E. coli IspD used 7.5 nM EcIspD-wt or 75 nM EcIspD-A14C. Absorbance at 360 nm was measured over time on a BMG POLARStar plate reader, preheated to 37 °C. Nonlinear regression analysis was performed using GraphPad Prism software. Values reflect the mean and standard error from ≥3 independent experimental and were compared using the Student’s t-test (two-tailed). Slopes of changing absorbance values were converted to (μM MEP) (μM enzyme)−1 s−1 using a phosphate standard curve.

P. falciparum culture

Unless otherwise specified, P. falciparum parasites were cultured as previously described6,53, in a 2% suspension of human erythrocytes in RPMI-1640 medium (Sigma Aldrich) supplemented with 27 mM sodium bicarbonate, 11 mM glucose, 5 mM HEPES, 1 mM sodium pyruvate, 0.37 mM hypoxanthine, 0.01 mM thymidine, 10 μg ml−1 gentamicin and 0.5% Albumax (Life Technologies). Cultures were maintained in 5% O2/5% CO2/90% N2 at 37 °C. Parasite growth was monitored by microscopy of Giemsa-stained parasites. 3D7 strain parasites were obtained from the Malaria Research and Reference Reagent Resource Center, ATCC, Manassas, Virginia. D6 and 7G8 strains were obtained through BEI Resources Repository, NIAID, NIH: Plasmodium falciparum, Strain D6, MRA-285, contributed by D.E. Kyle; Plasmodium falciparum, Strain 7G8, MRA-152, contributed by David Walliker. The IPC 5202 strain was provided by the Malaria Research and Reference Reagent Resource Center (MR4) for distribution by BEI Resources NIAID, NIH: Plasmodium falciparum, Strain IPC 5202, also known as CAM3.IR539T; MRA-1240, contributed by Didier Ménard.

Parasite sensitivity assays

Asynchronous cultures of P. falciparum strain 3D7 were diluted to 1% parasitemia and cultured at indicated concentrations of inhibitor compounds in 100 μL culture volumes. During rescue experiments, parasite growth medium was supplemented with 200 μM isopentenyl pyrophosphate (IPP; Echelon Biosciences). After 72 hours, parasite growth was quantified using PicoGreen dye (Invitrogen) to measure DNA content as previously described27. PicoGreen fluorescence was measured (485 nm excitation/528 nm emission) in a POLARStar Omega microplate reader (BMG Labtech). IC50 values were calculated by nonlinear regression analysis using GraphPad Prism software, and reflect the mean and standard error from ≥3 independent experiments. Values were compared using the Student’s t-test (two-tailed).

Additional Information

How to cite this article: Price, K. E. et al. Molecular Mechanism of Action of Antimalarial Benzoisothiazolones: Species-Selective Inhibitors of the Plasmodium spp. MEP Pathway enzyme, IspD. Sci. Rep. 6, 36777; doi: 10.1038/srep36777 (2016).

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.